mirror of
https://github.com/torvalds/linux.git
synced 2024-11-15 00:21:59 +00:00
4b7ecb38d8
The MMC module clocks on sun8i are the same as those found on previous Allwinner SoCs, module 0 clocks. This patch adds the clocks nodes to the dtsi with existing drivers. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
415 lines
9.3 KiB
Plaintext
415 lines
9.3 KiB
Plaintext
/*
|
|
* Copyright 2014 Chen-Yu Tsai
|
|
*
|
|
* Chen-Yu Tsai <wens@csie.org>
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
/include/ "skeleton.dtsi"
|
|
|
|
/ {
|
|
interrupt-parent = <&gic>;
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
serial2 = &uart2;
|
|
serial3 = &uart3;
|
|
serial4 = &uart4;
|
|
serial5 = &r_uart;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
compatible = "arm,cortex-a7";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
};
|
|
|
|
cpu@1 {
|
|
compatible = "arm,cortex-a7";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
reg = <0x40000000 0x40000000>;
|
|
};
|
|
|
|
clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
osc24M: osc24M_clk {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <24000000>;
|
|
clock-output-names = "osc24M";
|
|
};
|
|
|
|
osc32k: osc32k_clk {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "osc32k";
|
|
};
|
|
|
|
pll1: clk@01c20000 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun8i-a23-pll1-clk";
|
|
reg = <0x01c20000 0x4>;
|
|
clocks = <&osc24M>;
|
|
clock-output-names = "pll1";
|
|
};
|
|
|
|
/* dummy clock until actually implemented */
|
|
pll6: pll6_clk {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <600000000>;
|
|
clock-output-names = "pll6";
|
|
};
|
|
|
|
cpu: cpu_clk@01c20050 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-cpu-clk";
|
|
reg = <0x01c20050 0x4>;
|
|
|
|
/*
|
|
* PLL1 is listed twice here.
|
|
* While it looks suspicious, it's actually documented
|
|
* that way both in the datasheet and in the code from
|
|
* Allwinner.
|
|
*/
|
|
clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
|
|
clock-output-names = "cpu";
|
|
};
|
|
|
|
axi: axi_clk@01c20050 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun8i-a23-axi-clk";
|
|
reg = <0x01c20050 0x4>;
|
|
clocks = <&cpu>;
|
|
clock-output-names = "axi";
|
|
};
|
|
|
|
ahb1_mux: ahb1_mux_clk@01c20054 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun6i-a31-ahb1-mux-clk";
|
|
reg = <0x01c20054 0x4>;
|
|
clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6>;
|
|
clock-output-names = "ahb1_mux";
|
|
};
|
|
|
|
ahb1: ahb1_clk@01c20054 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-ahb-clk";
|
|
reg = <0x01c20054 0x4>;
|
|
clocks = <&ahb1_mux>;
|
|
clock-output-names = "ahb1";
|
|
};
|
|
|
|
apb1: apb1_clk@01c20054 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-apb0-clk";
|
|
reg = <0x01c20054 0x4>;
|
|
clocks = <&ahb1>;
|
|
clock-output-names = "apb1";
|
|
};
|
|
|
|
ahb1_gates: clk@01c20060 {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
|
|
reg = <0x01c20060 0x8>;
|
|
clocks = <&ahb1>;
|
|
clock-output-names = "ahb1_mipidsi", "ahb1_dma",
|
|
"ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
|
|
"ahb1_nand", "ahb1_sdram",
|
|
"ahb1_hstimer", "ahb1_spi0",
|
|
"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
|
|
"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
|
|
"ahb1_csi", "ahb1_be", "ahb1_fe",
|
|
"ahb1_gpu", "ahb1_spinlock",
|
|
"ahb1_drc";
|
|
};
|
|
|
|
apb1_gates: clk@01c20068 {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun8i-a23-apb1-gates-clk";
|
|
reg = <0x01c20068 0x4>;
|
|
clocks = <&apb1>;
|
|
clock-output-names = "apb1_codec", "apb1_pio",
|
|
"apb1_daudio0", "apb1_daudio1";
|
|
};
|
|
|
|
apb2_mux: apb2_mux_clk@01c20058 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-apb1-mux-clk";
|
|
reg = <0x01c20058 0x4>;
|
|
clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
|
|
clock-output-names = "apb2_mux";
|
|
};
|
|
|
|
apb2: apb2_clk@01c20058 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun6i-a31-apb2-div-clk";
|
|
reg = <0x01c20058 0x4>;
|
|
clocks = <&apb2_mux>;
|
|
clock-output-names = "apb2";
|
|
};
|
|
|
|
apb2_gates: clk@01c2006c {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun8i-a23-apb2-gates-clk";
|
|
reg = <0x01c2006c 0x4>;
|
|
clocks = <&apb2>;
|
|
clock-output-names = "apb2_i2c0", "apb2_i2c1",
|
|
"apb2_i2c2", "apb2_uart0",
|
|
"apb2_uart1", "apb2_uart2",
|
|
"apb2_uart3", "apb2_uart4";
|
|
};
|
|
|
|
mmc0_clk: clk@01c20088 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c20088 0x4>;
|
|
clocks = <&osc24M>, <&pll6>;
|
|
clock-output-names = "mmc0";
|
|
};
|
|
|
|
mmc1_clk: clk@01c2008c {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c2008c 0x4>;
|
|
clocks = <&osc24M>, <&pll6>;
|
|
clock-output-names = "mmc1";
|
|
};
|
|
|
|
mmc2_clk: clk@01c20090 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c20090 0x4>;
|
|
clocks = <&osc24M>, <&pll6>;
|
|
clock-output-names = "mmc2";
|
|
};
|
|
};
|
|
|
|
soc@01c00000 {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
pio: pinctrl@01c20800 {
|
|
compatible = "allwinner,sun8i-a23-pinctrl";
|
|
reg = <0x01c20800 0x400>;
|
|
interrupts = <0 11 4>,
|
|
<0 15 4>,
|
|
<0 17 4>;
|
|
clocks = <&apb1_gates 5>;
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
#gpio-cells = <3>;
|
|
|
|
uart0_pins_a: uart0@0 {
|
|
allwinner,pins = "PF2", "PF4";
|
|
allwinner,function = "uart0";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
};
|
|
|
|
ahb1_rst: reset@01c202c0 {
|
|
#reset-cells = <1>;
|
|
compatible = "allwinner,sun6i-a31-clock-reset";
|
|
reg = <0x01c202c0 0xc>;
|
|
};
|
|
|
|
apb1_rst: reset@01c202d0 {
|
|
#reset-cells = <1>;
|
|
compatible = "allwinner,sun6i-a31-clock-reset";
|
|
reg = <0x01c202d0 0x4>;
|
|
};
|
|
|
|
apb2_rst: reset@01c202d8 {
|
|
#reset-cells = <1>;
|
|
compatible = "allwinner,sun6i-a31-clock-reset";
|
|
reg = <0x01c202d8 0x4>;
|
|
};
|
|
|
|
timer@01c20c00 {
|
|
compatible = "allwinner,sun4i-a10-timer";
|
|
reg = <0x01c20c00 0xa0>;
|
|
interrupts = <0 18 4>,
|
|
<0 19 4>;
|
|
clocks = <&osc24M>;
|
|
};
|
|
|
|
wdt0: watchdog@01c20ca0 {
|
|
compatible = "allwinner,sun6i-a31-wdt";
|
|
reg = <0x01c20ca0 0x20>;
|
|
interrupts = <0 25 4>;
|
|
};
|
|
|
|
uart0: serial@01c28000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28000 0x400>;
|
|
interrupts = <0 0 4>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb2_gates 16>;
|
|
resets = <&apb2_rst 16>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@01c28400 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28400 0x400>;
|
|
interrupts = <0 1 4>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb2_gates 17>;
|
|
resets = <&apb2_rst 17>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@01c28800 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28800 0x400>;
|
|
interrupts = <0 2 4>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb2_gates 18>;
|
|
resets = <&apb2_rst 18>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@01c28c00 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28c00 0x400>;
|
|
interrupts = <0 3 4>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb2_gates 19>;
|
|
resets = <&apb2_rst 19>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart4: serial@01c29000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c29000 0x400>;
|
|
interrupts = <0 4 4>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb2_gates 20>;
|
|
resets = <&apb2_rst 20>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gic: interrupt-controller@01c81000 {
|
|
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
|
|
reg = <0x01c81000 0x1000>,
|
|
<0x01c82000 0x1000>,
|
|
<0x01c84000 0x2000>,
|
|
<0x01c86000 0x2000>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
interrupts = <1 9 0xf04>;
|
|
};
|
|
|
|
rtc: rtc@01f00000 {
|
|
compatible = "allwinner,sun6i-a31-rtc";
|
|
reg = <0x01f00000 0x54>;
|
|
interrupts = <0 40 4>, <0 41 4>;
|
|
};
|
|
|
|
prcm@01f01400 {
|
|
compatible = "allwinner,sun8i-a23-prcm";
|
|
reg = <0x01f01400 0x200>;
|
|
|
|
ar100: ar100_clk {
|
|
compatible = "fixed-factor-clock";
|
|
#clock-cells = <0>;
|
|
clock-div = <1>;
|
|
clock-mult = <1>;
|
|
clocks = <&osc24M>;
|
|
clock-output-names = "ar100";
|
|
};
|
|
|
|
ahb0: ahb0_clk {
|
|
compatible = "fixed-factor-clock";
|
|
#clock-cells = <0>;
|
|
clock-div = <1>;
|
|
clock-mult = <1>;
|
|
clocks = <&ar100>;
|
|
clock-output-names = "ahb0";
|
|
};
|
|
|
|
apb0: apb0_clk {
|
|
compatible = "allwinner,sun8i-a23-apb0-clk";
|
|
#clock-cells = <0>;
|
|
clocks = <&ahb0>;
|
|
clock-output-names = "apb0";
|
|
};
|
|
|
|
apb0_gates: apb0_gates_clk {
|
|
compatible = "allwinner,sun8i-a23-apb0-gates-clk";
|
|
#clock-cells = <1>;
|
|
clocks = <&apb0>;
|
|
clock-output-names = "apb0_pio", "apb0_timer",
|
|
"apb0_rsb", "apb0_uart",
|
|
"apb0_i2c";
|
|
};
|
|
|
|
apb0_rst: apb0_rst {
|
|
compatible = "allwinner,sun6i-a31-clock-reset";
|
|
#reset-cells = <1>;
|
|
};
|
|
};
|
|
|
|
r_uart: serial@01f02800 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01f02800 0x400>;
|
|
interrupts = <0 38 4>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb0_gates 4>;
|
|
resets = <&apb0_rst 4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
r_pio: pinctrl@01f02c00 {
|
|
compatible = "allwinner,sun8i-a23-r-pinctrl";
|
|
reg = <0x01f02c00 0x400>;
|
|
interrupts = <0 45 4>;
|
|
clocks = <&apb0_gates 0>;
|
|
resets = <&apb0_rst 0>;
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
#gpio-cells = <3>;
|
|
|
|
r_uart_pins_a: r_uart@0 {
|
|
allwinner,pins = "PL2", "PL3";
|
|
allwinner,function = "s_uart";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
};
|
|
};
|
|
};
|