linux/drivers/scsi/libfc/fc_rport.c
Joe Eykholt 4b2164d4d2 [SCSI] libfc: Fix remote port restart problem
This patch somewhat combines two fixes to remote port handing in libfc.

The first problem was that rport work could be queued on a deleted
and freed rport.  This is handled by not resetting rdata->event
ton NONE if the rdata is about to be deleted.

However, that fix led to the second problem, described by
Bhanu Gollapudi, as follows:
> Here is the sequence of events. T1 is first LOGO receive thread, T2 is
> fc_rport_work() scheduled by T1 and T3 is second LOGO receive thread and
> T4 is fc_rport_work scheduled by T3.
>
> 1. (T1)Received 1st LOGO in state Ready
> 2. (T1)Delete port & enter to RESTART state.
> 3. (T1)schdule event_work, since event is RPORT_EV_NONE.
> 4. (T1)set event = RPORT_EV_LOGO
> 5. (T1)Enter RESTART state as disc_id is set.
> 6. (T2)remember to PLOGI, and set event = RPORT_EV_NONE
> 6. (T3)Received 2nd LOGO
> 7. (T3)Delete Port & enter to RESTART state.
> 8. (T3)schedule event_work, since event is RPORT_EV_NONE.
> 9. (T3)Enter RESTART state as disc_id is set.
> 9. (T3)set event = RPORT_EV_LOGO
> 10.(T2)work restart, enter PLOGI state and issues PLOGI
> 11.(T4)Since state is not RESTART anymore, restart is not set, and the
> event is not reset to RPORT_EV_NONE. (current event is RPORT_EV_LOGO).
> 12. Now, PLOGI succeeds and fc_rport_enter_ready() will not schedule
> event_work, and hence the rport will never be created, eventually losing
> the target after dev_loss_tmo.

So, the problem here is that we were tracking the desire for
the rport be restarted by state RESTART, which was otherwise
equivalent to DELETE.  A contributing factor is that we dropped
the lock between steps 6 and 10 in thread T2, which allows the
state to change, and we didn't completely re-evaluate then.

This is hopefully corrected by the following minor redesign:

Simplify the rport restart logic by making the decision to
restart after deleting the transport rport.  That decision
is based on a new STARTED flag that indicates fc_rport_login()
has been called and fc_rport_logoff() has not been called
since then.  This replaces the need for the RESTART state.

Only restart if the rdata is still in DELETED state
and only if it still has the STARTED flag set.

Also now, since we clear the event code much later in the
work thread, allow for the possibility that the rport may
have become READY again via incoming PLOGI, and if so,
queue another event to handle that.

In the problem scenario, the second LOGO received will
cause the LOGO event to occur again.

Reported-by: Bhanu Gollapudi <bprakash@broadcom.com>
Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27 12:01:52 -05:00

1760 lines
46 KiB
C

/*
* Copyright(c) 2007 - 2008 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*
* Maintained at www.Open-FCoE.org
*/
/*
* RPORT GENERAL INFO
*
* This file contains all processing regarding fc_rports. It contains the
* rport state machine and does all rport interaction with the transport class.
* There should be no other places in libfc that interact directly with the
* transport class in regards to adding and deleting rports.
*
* fc_rport's represent N_Port's within the fabric.
*/
/*
* RPORT LOCKING
*
* The rport should never hold the rport mutex and then attempt to acquire
* either the lport or disc mutexes. The rport's mutex is considered lesser
* than both the lport's mutex and the disc mutex. Refer to fc_lport.c for
* more comments on the heirarchy.
*
* The locking strategy is similar to the lport's strategy. The lock protects
* the rport's states and is held and released by the entry points to the rport
* block. All _enter_* functions correspond to rport states and expect the rport
* mutex to be locked before calling them. This means that rports only handle
* one request or response at a time, since they're not critical for the I/O
* path this potential over-use of the mutex is acceptable.
*/
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/rcupdate.h>
#include <linux/timer.h>
#include <linux/workqueue.h>
#include <asm/unaligned.h>
#include <scsi/libfc.h>
#include <scsi/fc_encode.h>
#include "fc_libfc.h"
struct workqueue_struct *rport_event_queue;
static void fc_rport_enter_plogi(struct fc_rport_priv *);
static void fc_rport_enter_prli(struct fc_rport_priv *);
static void fc_rport_enter_rtv(struct fc_rport_priv *);
static void fc_rport_enter_ready(struct fc_rport_priv *);
static void fc_rport_enter_logo(struct fc_rport_priv *);
static void fc_rport_enter_adisc(struct fc_rport_priv *);
static void fc_rport_recv_plogi_req(struct fc_lport *,
struct fc_seq *, struct fc_frame *);
static void fc_rport_recv_prli_req(struct fc_rport_priv *,
struct fc_seq *, struct fc_frame *);
static void fc_rport_recv_prlo_req(struct fc_rport_priv *,
struct fc_seq *, struct fc_frame *);
static void fc_rport_recv_logo_req(struct fc_lport *,
struct fc_seq *, struct fc_frame *);
static void fc_rport_timeout(struct work_struct *);
static void fc_rport_error(struct fc_rport_priv *, struct fc_frame *);
static void fc_rport_error_retry(struct fc_rport_priv *, struct fc_frame *);
static void fc_rport_work(struct work_struct *);
static const char *fc_rport_state_names[] = {
[RPORT_ST_INIT] = "Init",
[RPORT_ST_PLOGI] = "PLOGI",
[RPORT_ST_PRLI] = "PRLI",
[RPORT_ST_RTV] = "RTV",
[RPORT_ST_READY] = "Ready",
[RPORT_ST_LOGO] = "LOGO",
[RPORT_ST_ADISC] = "ADISC",
[RPORT_ST_DELETE] = "Delete",
};
/**
* fc_rport_lookup() - Lookup a remote port by port_id
* @lport: The local port to lookup the remote port on
* @port_id: The remote port ID to look up
*/
static struct fc_rport_priv *fc_rport_lookup(const struct fc_lport *lport,
u32 port_id)
{
struct fc_rport_priv *rdata;
list_for_each_entry(rdata, &lport->disc.rports, peers)
if (rdata->ids.port_id == port_id)
return rdata;
return NULL;
}
/**
* fc_rport_create() - Create a new remote port
* @lport: The local port this remote port will be associated with
* @ids: The identifiers for the new remote port
*
* The remote port will start in the INIT state.
*
* Locking note: must be called with the disc_mutex held.
*/
static struct fc_rport_priv *fc_rport_create(struct fc_lport *lport,
u32 port_id)
{
struct fc_rport_priv *rdata;
rdata = lport->tt.rport_lookup(lport, port_id);
if (rdata)
return rdata;
rdata = kzalloc(sizeof(*rdata), GFP_KERNEL);
if (!rdata)
return NULL;
rdata->ids.node_name = -1;
rdata->ids.port_name = -1;
rdata->ids.port_id = port_id;
rdata->ids.roles = FC_RPORT_ROLE_UNKNOWN;
kref_init(&rdata->kref);
mutex_init(&rdata->rp_mutex);
rdata->local_port = lport;
rdata->rp_state = RPORT_ST_INIT;
rdata->event = RPORT_EV_NONE;
rdata->flags = FC_RP_FLAGS_REC_SUPPORTED;
rdata->e_d_tov = lport->e_d_tov;
rdata->r_a_tov = lport->r_a_tov;
rdata->maxframe_size = FC_MIN_MAX_PAYLOAD;
INIT_DELAYED_WORK(&rdata->retry_work, fc_rport_timeout);
INIT_WORK(&rdata->event_work, fc_rport_work);
if (port_id != FC_FID_DIR_SERV)
list_add(&rdata->peers, &lport->disc.rports);
return rdata;
}
/**
* fc_rport_destroy() - Free a remote port after last reference is released
* @kref: The remote port's kref
*/
static void fc_rport_destroy(struct kref *kref)
{
struct fc_rport_priv *rdata;
rdata = container_of(kref, struct fc_rport_priv, kref);
kfree(rdata);
}
/**
* fc_rport_state() - Return a string identifying the remote port's state
* @rdata: The remote port
*/
static const char *fc_rport_state(struct fc_rport_priv *rdata)
{
const char *cp;
cp = fc_rport_state_names[rdata->rp_state];
if (!cp)
cp = "Unknown";
return cp;
}
/**
* fc_set_rport_loss_tmo() - Set the remote port loss timeout
* @rport: The remote port that gets a new timeout value
* @timeout: The new timeout value (in seconds)
*/
void fc_set_rport_loss_tmo(struct fc_rport *rport, u32 timeout)
{
if (timeout)
rport->dev_loss_tmo = timeout + 5;
else
rport->dev_loss_tmo = 30;
}
EXPORT_SYMBOL(fc_set_rport_loss_tmo);
/**
* fc_plogi_get_maxframe() - Get the maximum payload from the common service
* parameters in a FLOGI frame
* @flp: The FLOGI payload
* @maxval: The maximum frame size upper limit; this may be less than what
* is in the service parameters
*/
static unsigned int fc_plogi_get_maxframe(struct fc_els_flogi *flp,
unsigned int maxval)
{
unsigned int mfs;
/*
* Get max payload from the common service parameters and the
* class 3 receive data field size.
*/
mfs = ntohs(flp->fl_csp.sp_bb_data) & FC_SP_BB_DATA_MASK;
if (mfs >= FC_SP_MIN_MAX_PAYLOAD && mfs < maxval)
maxval = mfs;
mfs = ntohs(flp->fl_cssp[3 - 1].cp_rdfs);
if (mfs >= FC_SP_MIN_MAX_PAYLOAD && mfs < maxval)
maxval = mfs;
return maxval;
}
/**
* fc_rport_state_enter() - Change the state of a remote port
* @rdata: The remote port whose state should change
* @new: The new state
*
* Locking Note: Called with the rport lock held
*/
static void fc_rport_state_enter(struct fc_rport_priv *rdata,
enum fc_rport_state new)
{
if (rdata->rp_state != new)
rdata->retries = 0;
rdata->rp_state = new;
}
/**
* fc_rport_work() - Handler for remote port events in the rport_event_queue
* @work: Handle to the remote port being dequeued
*/
static void fc_rport_work(struct work_struct *work)
{
u32 port_id;
struct fc_rport_priv *rdata =
container_of(work, struct fc_rport_priv, event_work);
struct fc_rport_libfc_priv *rpriv;
enum fc_rport_event event;
struct fc_lport *lport = rdata->local_port;
struct fc_rport_operations *rport_ops;
struct fc_rport_identifiers ids;
struct fc_rport *rport;
mutex_lock(&rdata->rp_mutex);
event = rdata->event;
rport_ops = rdata->ops;
rport = rdata->rport;
FC_RPORT_DBG(rdata, "work event %u\n", event);
switch (event) {
case RPORT_EV_READY:
ids = rdata->ids;
rdata->event = RPORT_EV_NONE;
kref_get(&rdata->kref);
mutex_unlock(&rdata->rp_mutex);
if (!rport)
rport = fc_remote_port_add(lport->host, 0, &ids);
if (!rport) {
FC_RPORT_DBG(rdata, "Failed to add the rport\n");
lport->tt.rport_logoff(rdata);
kref_put(&rdata->kref, lport->tt.rport_destroy);
return;
}
mutex_lock(&rdata->rp_mutex);
if (rdata->rport)
FC_RPORT_DBG(rdata, "rport already allocated\n");
rdata->rport = rport;
rport->maxframe_size = rdata->maxframe_size;
rport->supported_classes = rdata->supported_classes;
rpriv = rport->dd_data;
rpriv->local_port = lport;
rpriv->rp_state = rdata->rp_state;
rpriv->flags = rdata->flags;
rpriv->e_d_tov = rdata->e_d_tov;
rpriv->r_a_tov = rdata->r_a_tov;
mutex_unlock(&rdata->rp_mutex);
if (rport_ops && rport_ops->event_callback) {
FC_RPORT_DBG(rdata, "callback ev %d\n", event);
rport_ops->event_callback(lport, rdata, event);
}
kref_put(&rdata->kref, lport->tt.rport_destroy);
break;
case RPORT_EV_FAILED:
case RPORT_EV_LOGO:
case RPORT_EV_STOP:
port_id = rdata->ids.port_id;
mutex_unlock(&rdata->rp_mutex);
if (rport_ops && rport_ops->event_callback) {
FC_RPORT_DBG(rdata, "callback ev %d\n", event);
rport_ops->event_callback(lport, rdata, event);
}
cancel_delayed_work_sync(&rdata->retry_work);
/*
* Reset any outstanding exchanges before freeing rport.
*/
lport->tt.exch_mgr_reset(lport, 0, port_id);
lport->tt.exch_mgr_reset(lport, port_id, 0);
if (rport) {
rpriv = rport->dd_data;
rpriv->rp_state = RPORT_ST_DELETE;
mutex_lock(&rdata->rp_mutex);
rdata->rport = NULL;
mutex_unlock(&rdata->rp_mutex);
fc_remote_port_delete(rport);
}
mutex_lock(&lport->disc.disc_mutex);
mutex_lock(&rdata->rp_mutex);
if (rdata->rp_state == RPORT_ST_DELETE) {
if (port_id == FC_FID_DIR_SERV) {
rdata->event = RPORT_EV_NONE;
mutex_unlock(&rdata->rp_mutex);
} else if (rdata->flags & FC_RP_STARTED) {
rdata->event = RPORT_EV_NONE;
FC_RPORT_DBG(rdata, "work restart\n");
fc_rport_enter_plogi(rdata);
mutex_unlock(&rdata->rp_mutex);
} else {
FC_RPORT_DBG(rdata, "work delete\n");
list_del(&rdata->peers);
mutex_unlock(&rdata->rp_mutex);
kref_put(&rdata->kref, lport->tt.rport_destroy);
}
} else {
/*
* Re-open for events. Reissue READY event if ready.
*/
rdata->event = RPORT_EV_NONE;
if (rdata->rp_state == RPORT_ST_READY)
fc_rport_enter_ready(rdata);
mutex_unlock(&rdata->rp_mutex);
}
mutex_unlock(&lport->disc.disc_mutex);
break;
default:
mutex_unlock(&rdata->rp_mutex);
break;
}
}
/**
* fc_rport_login() - Start the remote port login state machine
* @rdata: The remote port to be logged in to
*
* Locking Note: Called without the rport lock held. This
* function will hold the rport lock, call an _enter_*
* function and then unlock the rport.
*
* This indicates the intent to be logged into the remote port.
* If it appears we are already logged in, ADISC is used to verify
* the setup.
*/
int fc_rport_login(struct fc_rport_priv *rdata)
{
mutex_lock(&rdata->rp_mutex);
rdata->flags |= FC_RP_STARTED;
switch (rdata->rp_state) {
case RPORT_ST_READY:
FC_RPORT_DBG(rdata, "ADISC port\n");
fc_rport_enter_adisc(rdata);
break;
case RPORT_ST_DELETE:
FC_RPORT_DBG(rdata, "Restart deleted port\n");
break;
default:
FC_RPORT_DBG(rdata, "Login to port\n");
fc_rport_enter_plogi(rdata);
break;
}
mutex_unlock(&rdata->rp_mutex);
return 0;
}
/**
* fc_rport_enter_delete() - Schedule a remote port to be deleted
* @rdata: The remote port to be deleted
* @event: The event to report as the reason for deletion
*
* Locking Note: Called with the rport lock held.
*
* Allow state change into DELETE only once.
*
* Call queue_work only if there's no event already pending.
* Set the new event so that the old pending event will not occur.
* Since we have the mutex, even if fc_rport_work() is already started,
* it'll see the new event.
*/
static void fc_rport_enter_delete(struct fc_rport_priv *rdata,
enum fc_rport_event event)
{
if (rdata->rp_state == RPORT_ST_DELETE)
return;
FC_RPORT_DBG(rdata, "Delete port\n");
fc_rport_state_enter(rdata, RPORT_ST_DELETE);
if (rdata->event == RPORT_EV_NONE)
queue_work(rport_event_queue, &rdata->event_work);
rdata->event = event;
}
/**
* fc_rport_logoff() - Logoff and remove a remote port
* @rdata: The remote port to be logged off of
*
* Locking Note: Called without the rport lock held. This
* function will hold the rport lock, call an _enter_*
* function and then unlock the rport.
*/
int fc_rport_logoff(struct fc_rport_priv *rdata)
{
mutex_lock(&rdata->rp_mutex);
FC_RPORT_DBG(rdata, "Remove port\n");
rdata->flags &= ~FC_RP_STARTED;
if (rdata->rp_state == RPORT_ST_DELETE) {
FC_RPORT_DBG(rdata, "Port in Delete state, not removing\n");
goto out;
}
fc_rport_enter_logo(rdata);
/*
* Change the state to Delete so that we discard
* the response.
*/
fc_rport_enter_delete(rdata, RPORT_EV_STOP);
out:
mutex_unlock(&rdata->rp_mutex);
return 0;
}
/**
* fc_rport_enter_ready() - Transition to the RPORT_ST_READY state
* @rdata: The remote port that is ready
*
* Locking Note: The rport lock is expected to be held before calling
* this routine.
*/
static void fc_rport_enter_ready(struct fc_rport_priv *rdata)
{
fc_rport_state_enter(rdata, RPORT_ST_READY);
FC_RPORT_DBG(rdata, "Port is Ready\n");
if (rdata->event == RPORT_EV_NONE)
queue_work(rport_event_queue, &rdata->event_work);
rdata->event = RPORT_EV_READY;
}
/**
* fc_rport_timeout() - Handler for the retry_work timer
* @work: Handle to the remote port that has timed out
*
* Locking Note: Called without the rport lock held. This
* function will hold the rport lock, call an _enter_*
* function and then unlock the rport.
*/
static void fc_rport_timeout(struct work_struct *work)
{
struct fc_rport_priv *rdata =
container_of(work, struct fc_rport_priv, retry_work.work);
mutex_lock(&rdata->rp_mutex);
switch (rdata->rp_state) {
case RPORT_ST_PLOGI:
fc_rport_enter_plogi(rdata);
break;
case RPORT_ST_PRLI:
fc_rport_enter_prli(rdata);
break;
case RPORT_ST_RTV:
fc_rport_enter_rtv(rdata);
break;
case RPORT_ST_LOGO:
fc_rport_enter_logo(rdata);
break;
case RPORT_ST_ADISC:
fc_rport_enter_adisc(rdata);
break;
case RPORT_ST_READY:
case RPORT_ST_INIT:
case RPORT_ST_DELETE:
break;
}
mutex_unlock(&rdata->rp_mutex);
}
/**
* fc_rport_error() - Error handler, called once retries have been exhausted
* @rdata: The remote port the error is happened on
* @fp: The error code encapsulated in a frame pointer
*
* Locking Note: The rport lock is expected to be held before
* calling this routine
*/
static void fc_rport_error(struct fc_rport_priv *rdata, struct fc_frame *fp)
{
FC_RPORT_DBG(rdata, "Error %ld in state %s, retries %d\n",
IS_ERR(fp) ? -PTR_ERR(fp) : 0,
fc_rport_state(rdata), rdata->retries);
switch (rdata->rp_state) {
case RPORT_ST_PLOGI:
case RPORT_ST_LOGO:
rdata->flags &= ~FC_RP_STARTED;
fc_rport_enter_delete(rdata, RPORT_EV_FAILED);
break;
case RPORT_ST_RTV:
fc_rport_enter_ready(rdata);
break;
case RPORT_ST_PRLI:
case RPORT_ST_ADISC:
fc_rport_enter_logo(rdata);
break;
case RPORT_ST_DELETE:
case RPORT_ST_READY:
case RPORT_ST_INIT:
break;
}
}
/**
* fc_rport_error_retry() - Handler for remote port state retries
* @rdata: The remote port whose state is to be retried
* @fp: The error code encapsulated in a frame pointer
*
* If the error was an exchange timeout retry immediately,
* otherwise wait for E_D_TOV.
*
* Locking Note: The rport lock is expected to be held before
* calling this routine
*/
static void fc_rport_error_retry(struct fc_rport_priv *rdata,
struct fc_frame *fp)
{
unsigned long delay = FC_DEF_E_D_TOV;
/* make sure this isn't an FC_EX_CLOSED error, never retry those */
if (PTR_ERR(fp) == -FC_EX_CLOSED)
return fc_rport_error(rdata, fp);
if (rdata->retries < rdata->local_port->max_rport_retry_count) {
FC_RPORT_DBG(rdata, "Error %ld in state %s, retrying\n",
PTR_ERR(fp), fc_rport_state(rdata));
rdata->retries++;
/* no additional delay on exchange timeouts */
if (PTR_ERR(fp) == -FC_EX_TIMEOUT)
delay = 0;
schedule_delayed_work(&rdata->retry_work, delay);
return;
}
return fc_rport_error(rdata, fp);
}
/**
* fc_rport_plogi_recv_resp() - Handler for ELS PLOGI responses
* @sp: The sequence the PLOGI is on
* @fp: The PLOGI response frame
* @rdata_arg: The remote port that sent the PLOGI response
*
* Locking Note: This function will be called without the rport lock
* held, but it will lock, call an _enter_* function or fc_rport_error
* and then unlock the rport.
*/
static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp,
void *rdata_arg)
{
struct fc_rport_priv *rdata = rdata_arg;
struct fc_lport *lport = rdata->local_port;
struct fc_els_flogi *plp = NULL;
unsigned int tov;
u16 csp_seq;
u16 cssp_seq;
u8 op;
mutex_lock(&rdata->rp_mutex);
FC_RPORT_DBG(rdata, "Received a PLOGI %s\n", fc_els_resp_type(fp));
if (rdata->rp_state != RPORT_ST_PLOGI) {
FC_RPORT_DBG(rdata, "Received a PLOGI response, but in state "
"%s\n", fc_rport_state(rdata));
if (IS_ERR(fp))
goto err;
goto out;
}
if (IS_ERR(fp)) {
fc_rport_error_retry(rdata, fp);
goto err;
}
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC &&
(plp = fc_frame_payload_get(fp, sizeof(*plp))) != NULL) {
rdata->ids.port_name = get_unaligned_be64(&plp->fl_wwpn);
rdata->ids.node_name = get_unaligned_be64(&plp->fl_wwnn);
tov = ntohl(plp->fl_csp.sp_e_d_tov);
if (ntohs(plp->fl_csp.sp_features) & FC_SP_FT_EDTR)
tov /= 1000000;
if (tov > rdata->e_d_tov)
rdata->e_d_tov = tov;
csp_seq = ntohs(plp->fl_csp.sp_tot_seq);
cssp_seq = ntohs(plp->fl_cssp[3 - 1].cp_con_seq);
if (cssp_seq < csp_seq)
csp_seq = cssp_seq;
rdata->max_seq = csp_seq;
rdata->maxframe_size = fc_plogi_get_maxframe(plp, lport->mfs);
fc_rport_enter_prli(rdata);
} else
fc_rport_error_retry(rdata, fp);
out:
fc_frame_free(fp);
err:
mutex_unlock(&rdata->rp_mutex);
kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy);
}
/**
* fc_rport_enter_plogi() - Send Port Login (PLOGI) request
* @rdata: The remote port to send a PLOGI to
*
* Locking Note: The rport lock is expected to be held before calling
* this routine.
*/
static void fc_rport_enter_plogi(struct fc_rport_priv *rdata)
{
struct fc_lport *lport = rdata->local_port;
struct fc_frame *fp;
FC_RPORT_DBG(rdata, "Port entered PLOGI state from %s state\n",
fc_rport_state(rdata));
fc_rport_state_enter(rdata, RPORT_ST_PLOGI);
rdata->maxframe_size = FC_MIN_MAX_PAYLOAD;
fp = fc_frame_alloc(lport, sizeof(struct fc_els_flogi));
if (!fp) {
fc_rport_error_retry(rdata, fp);
return;
}
rdata->e_d_tov = lport->e_d_tov;
if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_PLOGI,
fc_rport_plogi_resp, rdata,
2 * lport->r_a_tov))
fc_rport_error_retry(rdata, NULL);
else
kref_get(&rdata->kref);
}
/**
* fc_rport_prli_resp() - Process Login (PRLI) response handler
* @sp: The sequence the PRLI response was on
* @fp: The PRLI response frame
* @rdata_arg: The remote port that sent the PRLI response
*
* Locking Note: This function will be called without the rport lock
* held, but it will lock, call an _enter_* function or fc_rport_error
* and then unlock the rport.
*/
static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp,
void *rdata_arg)
{
struct fc_rport_priv *rdata = rdata_arg;
struct {
struct fc_els_prli prli;
struct fc_els_spp spp;
} *pp;
u32 roles = FC_RPORT_ROLE_UNKNOWN;
u32 fcp_parm = 0;
u8 op;
u8 resp_code = 0;
mutex_lock(&rdata->rp_mutex);
FC_RPORT_DBG(rdata, "Received a PRLI %s\n", fc_els_resp_type(fp));
if (rdata->rp_state != RPORT_ST_PRLI) {
FC_RPORT_DBG(rdata, "Received a PRLI response, but in state "
"%s\n", fc_rport_state(rdata));
if (IS_ERR(fp))
goto err;
goto out;
}
if (IS_ERR(fp)) {
fc_rport_error_retry(rdata, fp);
goto err;
}
/* reinitialize remote port roles */
rdata->ids.roles = FC_RPORT_ROLE_UNKNOWN;
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC) {
pp = fc_frame_payload_get(fp, sizeof(*pp));
if (!pp)
goto out;
resp_code = (pp->spp.spp_flags & FC_SPP_RESP_MASK);
FC_RPORT_DBG(rdata, "PRLI spp_flags = 0x%x\n",
pp->spp.spp_flags);
if (resp_code != FC_SPP_RESP_ACK) {
if (resp_code == FC_SPP_RESP_CONF)
fc_rport_error(rdata, fp);
else
fc_rport_error_retry(rdata, fp);
goto out;
}
if (pp->prli.prli_spp_len < sizeof(pp->spp))
goto out;
fcp_parm = ntohl(pp->spp.spp_params);
if (fcp_parm & FCP_SPPF_RETRY)
rdata->flags |= FC_RP_FLAGS_RETRY;
rdata->supported_classes = FC_COS_CLASS3;
if (fcp_parm & FCP_SPPF_INIT_FCN)
roles |= FC_RPORT_ROLE_FCP_INITIATOR;
if (fcp_parm & FCP_SPPF_TARG_FCN)
roles |= FC_RPORT_ROLE_FCP_TARGET;
rdata->ids.roles = roles;
fc_rport_enter_rtv(rdata);
} else {
FC_RPORT_DBG(rdata, "Bad ELS response for PRLI command\n");
fc_rport_error_retry(rdata, fp);
}
out:
fc_frame_free(fp);
err:
mutex_unlock(&rdata->rp_mutex);
kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy);
}
/**
* fc_rport_logo_resp() - Handler for logout (LOGO) responses
* @sp: The sequence the LOGO was on
* @fp: The LOGO response frame
* @rdata_arg: The remote port that sent the LOGO response
*
* Locking Note: This function will be called without the rport lock
* held, but it will lock, call an _enter_* function or fc_rport_error
* and then unlock the rport.
*/
static void fc_rport_logo_resp(struct fc_seq *sp, struct fc_frame *fp,
void *rdata_arg)
{
struct fc_rport_priv *rdata = rdata_arg;
u8 op;
mutex_lock(&rdata->rp_mutex);
FC_RPORT_DBG(rdata, "Received a LOGO %s\n", fc_els_resp_type(fp));
if (rdata->rp_state != RPORT_ST_LOGO) {
FC_RPORT_DBG(rdata, "Received a LOGO response, but in state "
"%s\n", fc_rport_state(rdata));
if (IS_ERR(fp))
goto err;
goto out;
}
if (IS_ERR(fp)) {
fc_rport_error_retry(rdata, fp);
goto err;
}
op = fc_frame_payload_op(fp);
if (op != ELS_LS_ACC)
FC_RPORT_DBG(rdata, "Bad ELS response op %x for LOGO command\n",
op);
fc_rport_enter_delete(rdata, RPORT_EV_LOGO);
out:
fc_frame_free(fp);
err:
mutex_unlock(&rdata->rp_mutex);
kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy);
}
/**
* fc_rport_enter_prli() - Send Process Login (PRLI) request
* @rdata: The remote port to send the PRLI request to
*
* Locking Note: The rport lock is expected to be held before calling
* this routine.
*/
static void fc_rport_enter_prli(struct fc_rport_priv *rdata)
{
struct fc_lport *lport = rdata->local_port;
struct {
struct fc_els_prli prli;
struct fc_els_spp spp;
} *pp;
struct fc_frame *fp;
/*
* If the rport is one of the well known addresses
* we skip PRLI and RTV and go straight to READY.
*/
if (rdata->ids.port_id >= FC_FID_DOM_MGR) {
fc_rport_enter_ready(rdata);
return;
}
FC_RPORT_DBG(rdata, "Port entered PRLI state from %s state\n",
fc_rport_state(rdata));
fc_rport_state_enter(rdata, RPORT_ST_PRLI);
fp = fc_frame_alloc(lport, sizeof(*pp));
if (!fp) {
fc_rport_error_retry(rdata, fp);
return;
}
if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_PRLI,
fc_rport_prli_resp, rdata,
2 * lport->r_a_tov))
fc_rport_error_retry(rdata, NULL);
else
kref_get(&rdata->kref);
}
/**
* fc_rport_els_rtv_resp() - Handler for Request Timeout Value (RTV) responses
* @sp: The sequence the RTV was on
* @fp: The RTV response frame
* @rdata_arg: The remote port that sent the RTV response
*
* Many targets don't seem to support this.
*
* Locking Note: This function will be called without the rport lock
* held, but it will lock, call an _enter_* function or fc_rport_error
* and then unlock the rport.
*/
static void fc_rport_rtv_resp(struct fc_seq *sp, struct fc_frame *fp,
void *rdata_arg)
{
struct fc_rport_priv *rdata = rdata_arg;
u8 op;
mutex_lock(&rdata->rp_mutex);
FC_RPORT_DBG(rdata, "Received a RTV %s\n", fc_els_resp_type(fp));
if (rdata->rp_state != RPORT_ST_RTV) {
FC_RPORT_DBG(rdata, "Received a RTV response, but in state "
"%s\n", fc_rport_state(rdata));
if (IS_ERR(fp))
goto err;
goto out;
}
if (IS_ERR(fp)) {
fc_rport_error(rdata, fp);
goto err;
}
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC) {
struct fc_els_rtv_acc *rtv;
u32 toq;
u32 tov;
rtv = fc_frame_payload_get(fp, sizeof(*rtv));
if (rtv) {
toq = ntohl(rtv->rtv_toq);
tov = ntohl(rtv->rtv_r_a_tov);
if (tov == 0)
tov = 1;
rdata->r_a_tov = tov;
tov = ntohl(rtv->rtv_e_d_tov);
if (toq & FC_ELS_RTV_EDRES)
tov /= 1000000;
if (tov == 0)
tov = 1;
rdata->e_d_tov = tov;
}
}
fc_rport_enter_ready(rdata);
out:
fc_frame_free(fp);
err:
mutex_unlock(&rdata->rp_mutex);
kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy);
}
/**
* fc_rport_enter_rtv() - Send Request Timeout Value (RTV) request
* @rdata: The remote port to send the RTV request to
*
* Locking Note: The rport lock is expected to be held before calling
* this routine.
*/
static void fc_rport_enter_rtv(struct fc_rport_priv *rdata)
{
struct fc_frame *fp;
struct fc_lport *lport = rdata->local_port;
FC_RPORT_DBG(rdata, "Port entered RTV state from %s state\n",
fc_rport_state(rdata));
fc_rport_state_enter(rdata, RPORT_ST_RTV);
fp = fc_frame_alloc(lport, sizeof(struct fc_els_rtv));
if (!fp) {
fc_rport_error_retry(rdata, fp);
return;
}
if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_RTV,
fc_rport_rtv_resp, rdata,
2 * lport->r_a_tov))
fc_rport_error_retry(rdata, NULL);
else
kref_get(&rdata->kref);
}
/**
* fc_rport_enter_logo() - Send a logout (LOGO) request
* @rdata: The remote port to send the LOGO request to
*
* Locking Note: The rport lock is expected to be held before calling
* this routine.
*/
static void fc_rport_enter_logo(struct fc_rport_priv *rdata)
{
struct fc_lport *lport = rdata->local_port;
struct fc_frame *fp;
FC_RPORT_DBG(rdata, "Port entered LOGO state from %s state\n",
fc_rport_state(rdata));
fc_rport_state_enter(rdata, RPORT_ST_LOGO);
fp = fc_frame_alloc(lport, sizeof(struct fc_els_logo));
if (!fp) {
fc_rport_error_retry(rdata, fp);
return;
}
if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_LOGO,
fc_rport_logo_resp, rdata,
2 * lport->r_a_tov))
fc_rport_error_retry(rdata, NULL);
else
kref_get(&rdata->kref);
}
/**
* fc_rport_els_adisc_resp() - Handler for Address Discovery (ADISC) responses
* @sp: The sequence the ADISC response was on
* @fp: The ADISC response frame
* @rdata_arg: The remote port that sent the ADISC response
*
* Locking Note: This function will be called without the rport lock
* held, but it will lock, call an _enter_* function or fc_rport_error
* and then unlock the rport.
*/
static void fc_rport_adisc_resp(struct fc_seq *sp, struct fc_frame *fp,
void *rdata_arg)
{
struct fc_rport_priv *rdata = rdata_arg;
struct fc_els_adisc *adisc;
u8 op;
mutex_lock(&rdata->rp_mutex);
FC_RPORT_DBG(rdata, "Received a ADISC response\n");
if (rdata->rp_state != RPORT_ST_ADISC) {
FC_RPORT_DBG(rdata, "Received a ADISC resp but in state %s\n",
fc_rport_state(rdata));
if (IS_ERR(fp))
goto err;
goto out;
}
if (IS_ERR(fp)) {
fc_rport_error(rdata, fp);
goto err;
}
/*
* If address verification failed. Consider us logged out of the rport.
* Since the rport is still in discovery, we want to be
* logged in, so go to PLOGI state. Otherwise, go back to READY.
*/
op = fc_frame_payload_op(fp);
adisc = fc_frame_payload_get(fp, sizeof(*adisc));
if (op != ELS_LS_ACC || !adisc ||
ntoh24(adisc->adisc_port_id) != rdata->ids.port_id ||
get_unaligned_be64(&adisc->adisc_wwpn) != rdata->ids.port_name ||
get_unaligned_be64(&adisc->adisc_wwnn) != rdata->ids.node_name) {
FC_RPORT_DBG(rdata, "ADISC error or mismatch\n");
fc_rport_enter_plogi(rdata);
} else {
FC_RPORT_DBG(rdata, "ADISC OK\n");
fc_rport_enter_ready(rdata);
}
out:
fc_frame_free(fp);
err:
mutex_unlock(&rdata->rp_mutex);
kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy);
}
/**
* fc_rport_enter_adisc() - Send Address Discover (ADISC) request
* @rdata: The remote port to send the ADISC request to
*
* Locking Note: The rport lock is expected to be held before calling
* this routine.
*/
static void fc_rport_enter_adisc(struct fc_rport_priv *rdata)
{
struct fc_lport *lport = rdata->local_port;
struct fc_frame *fp;
FC_RPORT_DBG(rdata, "sending ADISC from %s state\n",
fc_rport_state(rdata));
fc_rport_state_enter(rdata, RPORT_ST_ADISC);
fp = fc_frame_alloc(lport, sizeof(struct fc_els_adisc));
if (!fp) {
fc_rport_error_retry(rdata, fp);
return;
}
if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_ADISC,
fc_rport_adisc_resp, rdata,
2 * lport->r_a_tov))
fc_rport_error_retry(rdata, NULL);
else
kref_get(&rdata->kref);
}
/**
* fc_rport_recv_adisc_req() - Handler for Address Discovery (ADISC) requests
* @rdata: The remote port that sent the ADISC request
* @sp: The sequence the ADISC request was on
* @in_fp: The ADISC request frame
*
* Locking Note: Called with the lport and rport locks held.
*/
static void fc_rport_recv_adisc_req(struct fc_rport_priv *rdata,
struct fc_seq *sp, struct fc_frame *in_fp)
{
struct fc_lport *lport = rdata->local_port;
struct fc_frame *fp;
struct fc_exch *ep = fc_seq_exch(sp);
struct fc_els_adisc *adisc;
struct fc_seq_els_data rjt_data;
u32 f_ctl;
FC_RPORT_DBG(rdata, "Received ADISC request\n");
adisc = fc_frame_payload_get(in_fp, sizeof(*adisc));
if (!adisc) {
rjt_data.fp = NULL;
rjt_data.reason = ELS_RJT_PROT;
rjt_data.explan = ELS_EXPL_INV_LEN;
lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &rjt_data);
goto drop;
}
fp = fc_frame_alloc(lport, sizeof(*adisc));
if (!fp)
goto drop;
fc_adisc_fill(lport, fp);
adisc = fc_frame_payload_get(fp, sizeof(*adisc));
adisc->adisc_cmd = ELS_LS_ACC;
sp = lport->tt.seq_start_next(sp);
f_ctl = FC_FC_EX_CTX | FC_FC_LAST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT;
fc_fill_fc_hdr(fp, FC_RCTL_ELS_REP, ep->did, ep->sid,
FC_TYPE_ELS, f_ctl, 0);
lport->tt.seq_send(lport, sp, fp);
drop:
fc_frame_free(in_fp);
}
/**
* fc_rport_recv_rls_req() - Handle received Read Link Status request
* @rdata: The remote port that sent the RLS request
* @sp: The sequence that the RLS was on
* @rx_fp: The PRLI request frame
*
* Locking Note: The rport lock is expected to be held before calling
* this function.
*/
static void fc_rport_recv_rls_req(struct fc_rport_priv *rdata,
struct fc_seq *sp, struct fc_frame *rx_fp)
{
struct fc_lport *lport = rdata->local_port;
struct fc_frame *fp;
struct fc_exch *ep = fc_seq_exch(sp);
struct fc_els_rls *rls;
struct fc_els_rls_resp *rsp;
struct fc_els_lesb *lesb;
struct fc_seq_els_data rjt_data;
struct fc_host_statistics *hst;
u32 f_ctl;
FC_RPORT_DBG(rdata, "Received RLS request while in state %s\n",
fc_rport_state(rdata));
rls = fc_frame_payload_get(rx_fp, sizeof(*rls));
if (!rls) {
rjt_data.reason = ELS_RJT_PROT;
rjt_data.explan = ELS_EXPL_INV_LEN;
goto out_rjt;
}
fp = fc_frame_alloc(lport, sizeof(*rsp));
if (!fp) {
rjt_data.reason = ELS_RJT_UNAB;
rjt_data.explan = ELS_EXPL_INSUF_RES;
goto out_rjt;
}
rsp = fc_frame_payload_get(fp, sizeof(*rsp));
memset(rsp, 0, sizeof(*rsp));
rsp->rls_cmd = ELS_LS_ACC;
lesb = &rsp->rls_lesb;
if (lport->tt.get_lesb) {
/* get LESB from LLD if it supports it */
lport->tt.get_lesb(lport, lesb);
} else {
fc_get_host_stats(lport->host);
hst = &lport->host_stats;
lesb->lesb_link_fail = htonl(hst->link_failure_count);
lesb->lesb_sync_loss = htonl(hst->loss_of_sync_count);
lesb->lesb_sig_loss = htonl(hst->loss_of_signal_count);
lesb->lesb_prim_err = htonl(hst->prim_seq_protocol_err_count);
lesb->lesb_inv_word = htonl(hst->invalid_tx_word_count);
lesb->lesb_inv_crc = htonl(hst->invalid_crc_count);
}
sp = lport->tt.seq_start_next(sp);
f_ctl = FC_FC_EX_CTX | FC_FC_LAST_SEQ | FC_FC_END_SEQ;
fc_fill_fc_hdr(fp, FC_RCTL_ELS_REP, ep->did, ep->sid,
FC_TYPE_ELS, f_ctl, 0);
lport->tt.seq_send(lport, sp, fp);
goto out;
out_rjt:
rjt_data.fp = NULL;
lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &rjt_data);
out:
fc_frame_free(rx_fp);
}
/**
* fc_rport_recv_els_req() - Handler for validated ELS requests
* @lport: The local port that received the ELS request
* @sp: The sequence that the ELS request was on
* @fp: The ELS request frame
*
* Handle incoming ELS requests that require port login.
* The ELS opcode has already been validated by the caller.
*
* Locking Note: Called with the lport lock held.
*/
static void fc_rport_recv_els_req(struct fc_lport *lport,
struct fc_seq *sp, struct fc_frame *fp)
{
struct fc_rport_priv *rdata;
struct fc_frame_header *fh;
struct fc_seq_els_data els_data;
els_data.fp = NULL;
els_data.reason = ELS_RJT_UNAB;
els_data.explan = ELS_EXPL_PLOGI_REQD;
fh = fc_frame_header_get(fp);
mutex_lock(&lport->disc.disc_mutex);
rdata = lport->tt.rport_lookup(lport, ntoh24(fh->fh_s_id));
if (!rdata) {
mutex_unlock(&lport->disc.disc_mutex);
goto reject;
}
mutex_lock(&rdata->rp_mutex);
mutex_unlock(&lport->disc.disc_mutex);
switch (rdata->rp_state) {
case RPORT_ST_PRLI:
case RPORT_ST_RTV:
case RPORT_ST_READY:
case RPORT_ST_ADISC:
break;
default:
mutex_unlock(&rdata->rp_mutex);
goto reject;
}
switch (fc_frame_payload_op(fp)) {
case ELS_PRLI:
fc_rport_recv_prli_req(rdata, sp, fp);
break;
case ELS_PRLO:
fc_rport_recv_prlo_req(rdata, sp, fp);
break;
case ELS_ADISC:
fc_rport_recv_adisc_req(rdata, sp, fp);
break;
case ELS_RRQ:
els_data.fp = fp;
lport->tt.seq_els_rsp_send(sp, ELS_RRQ, &els_data);
break;
case ELS_REC:
els_data.fp = fp;
lport->tt.seq_els_rsp_send(sp, ELS_REC, &els_data);
break;
case ELS_RLS:
fc_rport_recv_rls_req(rdata, sp, fp);
break;
default:
fc_frame_free(fp); /* can't happen */
break;
}
mutex_unlock(&rdata->rp_mutex);
return;
reject:
lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &els_data);
fc_frame_free(fp);
}
/**
* fc_rport_recv_req() - Handler for requests
* @sp: The sequence the request was on
* @fp: The request frame
* @lport: The local port that received the request
*
* Locking Note: Called with the lport lock held.
*/
void fc_rport_recv_req(struct fc_seq *sp, struct fc_frame *fp,
struct fc_lport *lport)
{
struct fc_seq_els_data els_data;
/*
* Handle PLOGI and LOGO requests separately, since they
* don't require prior login.
* Check for unsupported opcodes first and reject them.
* For some ops, it would be incorrect to reject with "PLOGI required".
*/
switch (fc_frame_payload_op(fp)) {
case ELS_PLOGI:
fc_rport_recv_plogi_req(lport, sp, fp);
break;
case ELS_LOGO:
fc_rport_recv_logo_req(lport, sp, fp);
break;
case ELS_PRLI:
case ELS_PRLO:
case ELS_ADISC:
case ELS_RRQ:
case ELS_REC:
case ELS_RLS:
fc_rport_recv_els_req(lport, sp, fp);
break;
default:
fc_frame_free(fp);
els_data.fp = NULL;
els_data.reason = ELS_RJT_UNSUP;
els_data.explan = ELS_EXPL_NONE;
lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &els_data);
break;
}
}
/**
* fc_rport_recv_plogi_req() - Handler for Port Login (PLOGI) requests
* @lport: The local port that received the PLOGI request
* @sp: The sequence that the PLOGI request was on
* @rx_fp: The PLOGI request frame
*
* Locking Note: The rport lock is held before calling this function.
*/
static void fc_rport_recv_plogi_req(struct fc_lport *lport,
struct fc_seq *sp, struct fc_frame *rx_fp)
{
struct fc_disc *disc;
struct fc_rport_priv *rdata;
struct fc_frame *fp = rx_fp;
struct fc_exch *ep;
struct fc_frame_header *fh;
struct fc_els_flogi *pl;
struct fc_seq_els_data rjt_data;
u32 sid, f_ctl;
rjt_data.fp = NULL;
fh = fc_frame_header_get(fp);
sid = ntoh24(fh->fh_s_id);
FC_RPORT_ID_DBG(lport, sid, "Received PLOGI request\n");
pl = fc_frame_payload_get(fp, sizeof(*pl));
if (!pl) {
FC_RPORT_ID_DBG(lport, sid, "Received PLOGI too short\n");
rjt_data.reason = ELS_RJT_PROT;
rjt_data.explan = ELS_EXPL_INV_LEN;
goto reject;
}
disc = &lport->disc;
mutex_lock(&disc->disc_mutex);
rdata = lport->tt.rport_create(lport, sid);
if (!rdata) {
mutex_unlock(&disc->disc_mutex);
rjt_data.reason = ELS_RJT_UNAB;
rjt_data.explan = ELS_EXPL_INSUF_RES;
goto reject;
}
mutex_lock(&rdata->rp_mutex);
mutex_unlock(&disc->disc_mutex);
rdata->ids.port_name = get_unaligned_be64(&pl->fl_wwpn);
rdata->ids.node_name = get_unaligned_be64(&pl->fl_wwnn);
/*
* If the rport was just created, possibly due to the incoming PLOGI,
* set the state appropriately and accept the PLOGI.
*
* If we had also sent a PLOGI, and if the received PLOGI is from a
* higher WWPN, we accept it, otherwise an LS_RJT is sent with reason
* "command already in progress".
*
* XXX TBD: If the session was ready before, the PLOGI should result in
* all outstanding exchanges being reset.
*/
switch (rdata->rp_state) {
case RPORT_ST_INIT:
FC_RPORT_DBG(rdata, "Received PLOGI in INIT state\n");
break;
case RPORT_ST_PLOGI:
FC_RPORT_DBG(rdata, "Received PLOGI in PLOGI state\n");
if (rdata->ids.port_name < lport->wwpn) {
mutex_unlock(&rdata->rp_mutex);
rjt_data.reason = ELS_RJT_INPROG;
rjt_data.explan = ELS_EXPL_NONE;
goto reject;
}
break;
case RPORT_ST_PRLI:
case RPORT_ST_RTV:
case RPORT_ST_READY:
case RPORT_ST_ADISC:
FC_RPORT_DBG(rdata, "Received PLOGI in logged-in state %d "
"- ignored for now\n", rdata->rp_state);
/* XXX TBD - should reset */
break;
case RPORT_ST_DELETE:
case RPORT_ST_LOGO:
FC_RPORT_DBG(rdata, "Received PLOGI in state %s - send busy\n",
fc_rport_state(rdata));
mutex_unlock(&rdata->rp_mutex);
rjt_data.reason = ELS_RJT_BUSY;
rjt_data.explan = ELS_EXPL_NONE;
goto reject;
}
/*
* Get session payload size from incoming PLOGI.
*/
rdata->maxframe_size = fc_plogi_get_maxframe(pl, lport->mfs);
fc_frame_free(rx_fp);
/*
* Send LS_ACC. If this fails, the originator should retry.
*/
sp = lport->tt.seq_start_next(sp);
if (!sp)
goto out;
fp = fc_frame_alloc(lport, sizeof(*pl));
if (!fp)
goto out;
fc_plogi_fill(lport, fp, ELS_LS_ACC);
f_ctl = FC_FC_EX_CTX | FC_FC_LAST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT;
ep = fc_seq_exch(sp);
fc_fill_fc_hdr(fp, FC_RCTL_ELS_REP, ep->did, ep->sid,
FC_TYPE_ELS, f_ctl, 0);
lport->tt.seq_send(lport, sp, fp);
fc_rport_enter_prli(rdata);
out:
mutex_unlock(&rdata->rp_mutex);
return;
reject:
lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &rjt_data);
fc_frame_free(fp);
}
/**
* fc_rport_recv_prli_req() - Handler for process login (PRLI) requests
* @rdata: The remote port that sent the PRLI request
* @sp: The sequence that the PRLI was on
* @rx_fp: The PRLI request frame
*
* Locking Note: The rport lock is exected to be held before calling
* this function.
*/
static void fc_rport_recv_prli_req(struct fc_rport_priv *rdata,
struct fc_seq *sp, struct fc_frame *rx_fp)
{
struct fc_lport *lport = rdata->local_port;
struct fc_exch *ep;
struct fc_frame *fp;
struct fc_frame_header *fh;
struct {
struct fc_els_prli prli;
struct fc_els_spp spp;
} *pp;
struct fc_els_spp *rspp; /* request service param page */
struct fc_els_spp *spp; /* response spp */
unsigned int len;
unsigned int plen;
enum fc_els_spp_resp resp;
struct fc_seq_els_data rjt_data;
u32 f_ctl;
u32 fcp_parm;
u32 roles = FC_RPORT_ROLE_UNKNOWN;
rjt_data.fp = NULL;
fh = fc_frame_header_get(rx_fp);
FC_RPORT_DBG(rdata, "Received PRLI request while in state %s\n",
fc_rport_state(rdata));
len = fr_len(rx_fp) - sizeof(*fh);
pp = fc_frame_payload_get(rx_fp, sizeof(*pp));
if (!pp)
goto reject_len;
plen = ntohs(pp->prli.prli_len);
if ((plen % 4) != 0 || plen > len || plen < 16)
goto reject_len;
if (plen < len)
len = plen;
plen = pp->prli.prli_spp_len;
if ((plen % 4) != 0 || plen < sizeof(*spp) ||
plen > len || len < sizeof(*pp) || plen < 12)
goto reject_len;
rspp = &pp->spp;
fp = fc_frame_alloc(lport, len);
if (!fp) {
rjt_data.reason = ELS_RJT_UNAB;
rjt_data.explan = ELS_EXPL_INSUF_RES;
goto reject;
}
sp = lport->tt.seq_start_next(sp);
WARN_ON(!sp);
pp = fc_frame_payload_get(fp, len);
WARN_ON(!pp);
memset(pp, 0, len);
pp->prli.prli_cmd = ELS_LS_ACC;
pp->prli.prli_spp_len = plen;
pp->prli.prli_len = htons(len);
len -= sizeof(struct fc_els_prli);
/* reinitialize remote port roles */
rdata->ids.roles = FC_RPORT_ROLE_UNKNOWN;
/*
* Go through all the service parameter pages and build
* response. If plen indicates longer SPP than standard,
* use that. The entire response has been pre-cleared above.
*/
spp = &pp->spp;
while (len >= plen) {
spp->spp_type = rspp->spp_type;
spp->spp_type_ext = rspp->spp_type_ext;
spp->spp_flags = rspp->spp_flags & FC_SPP_EST_IMG_PAIR;
resp = FC_SPP_RESP_ACK;
switch (rspp->spp_type) {
case 0: /* common to all FC-4 types */
break;
case FC_TYPE_FCP:
fcp_parm = ntohl(rspp->spp_params);
if (fcp_parm & FCP_SPPF_RETRY)
rdata->flags |= FC_RP_FLAGS_RETRY;
rdata->supported_classes = FC_COS_CLASS3;
if (fcp_parm & FCP_SPPF_INIT_FCN)
roles |= FC_RPORT_ROLE_FCP_INITIATOR;
if (fcp_parm & FCP_SPPF_TARG_FCN)
roles |= FC_RPORT_ROLE_FCP_TARGET;
rdata->ids.roles = roles;
spp->spp_params = htonl(lport->service_params);
break;
default:
resp = FC_SPP_RESP_INVL;
break;
}
spp->spp_flags |= resp;
len -= plen;
rspp = (struct fc_els_spp *)((char *)rspp + plen);
spp = (struct fc_els_spp *)((char *)spp + plen);
}
/*
* Send LS_ACC. If this fails, the originator should retry.
*/
f_ctl = FC_FC_EX_CTX | FC_FC_LAST_SEQ;
f_ctl |= FC_FC_END_SEQ | FC_FC_SEQ_INIT;
ep = fc_seq_exch(sp);
fc_fill_fc_hdr(fp, FC_RCTL_ELS_REP, ep->did, ep->sid,
FC_TYPE_ELS, f_ctl, 0);
lport->tt.seq_send(lport, sp, fp);
switch (rdata->rp_state) {
case RPORT_ST_PRLI:
fc_rport_enter_ready(rdata);
break;
default:
break;
}
goto drop;
reject_len:
rjt_data.reason = ELS_RJT_PROT;
rjt_data.explan = ELS_EXPL_INV_LEN;
reject:
lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &rjt_data);
drop:
fc_frame_free(rx_fp);
}
/**
* fc_rport_recv_prlo_req() - Handler for process logout (PRLO) requests
* @rdata: The remote port that sent the PRLO request
* @sp: The sequence that the PRLO was on
* @rx_fp: The PRLO request frame
*
* Locking Note: The rport lock is exected to be held before calling
* this function.
*/
static void fc_rport_recv_prlo_req(struct fc_rport_priv *rdata,
struct fc_seq *sp,
struct fc_frame *rx_fp)
{
struct fc_lport *lport = rdata->local_port;
struct fc_frame_header *fh;
struct fc_exch *ep;
struct fc_frame *fp;
struct {
struct fc_els_prlo prlo;
struct fc_els_spp spp;
} *pp;
struct fc_els_spp *rspp; /* request service param page */
struct fc_els_spp *spp; /* response spp */
unsigned int len;
unsigned int plen;
u32 f_ctl;
struct fc_seq_els_data rjt_data;
rjt_data.fp = NULL;
fh = fc_frame_header_get(rx_fp);
FC_RPORT_DBG(rdata, "Received PRLO request while in state %s\n",
fc_rport_state(rdata));
len = fr_len(rx_fp) - sizeof(*fh);
pp = fc_frame_payload_get(rx_fp, sizeof(*pp));
if (!pp)
goto reject_len;
plen = ntohs(pp->prlo.prlo_len);
if (plen != 20)
goto reject_len;
if (plen < len)
len = plen;
rspp = &pp->spp;
fp = fc_frame_alloc(lport, len);
if (!fp) {
rjt_data.reason = ELS_RJT_UNAB;
rjt_data.explan = ELS_EXPL_INSUF_RES;
goto reject;
}
sp = lport->tt.seq_start_next(sp);
WARN_ON(!sp);
pp = fc_frame_payload_get(fp, len);
WARN_ON(!pp);
memset(pp, 0, len);
pp->prlo.prlo_cmd = ELS_LS_ACC;
pp->prlo.prlo_obs = 0x10;
pp->prlo.prlo_len = htons(len);
spp = &pp->spp;
spp->spp_type = rspp->spp_type;
spp->spp_type_ext = rspp->spp_type_ext;
spp->spp_flags = FC_SPP_RESP_ACK;
fc_rport_enter_delete(rdata, RPORT_EV_LOGO);
f_ctl = FC_FC_EX_CTX | FC_FC_LAST_SEQ;
f_ctl |= FC_FC_END_SEQ | FC_FC_SEQ_INIT;
ep = fc_seq_exch(sp);
fc_fill_fc_hdr(fp, FC_RCTL_ELS_REP, ep->did, ep->sid,
FC_TYPE_ELS, f_ctl, 0);
lport->tt.seq_send(lport, sp, fp);
goto drop;
reject_len:
rjt_data.reason = ELS_RJT_PROT;
rjt_data.explan = ELS_EXPL_INV_LEN;
reject:
lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &rjt_data);
drop:
fc_frame_free(rx_fp);
}
/**
* fc_rport_recv_logo_req() - Handler for logout (LOGO) requests
* @lport: The local port that received the LOGO request
* @sp: The sequence that the LOGO request was on
* @fp: The LOGO request frame
*
* Locking Note: The rport lock is exected to be held before calling
* this function.
*/
static void fc_rport_recv_logo_req(struct fc_lport *lport,
struct fc_seq *sp,
struct fc_frame *fp)
{
struct fc_frame_header *fh;
struct fc_rport_priv *rdata;
u32 sid;
lport->tt.seq_els_rsp_send(sp, ELS_LS_ACC, NULL);
fh = fc_frame_header_get(fp);
sid = ntoh24(fh->fh_s_id);
mutex_lock(&lport->disc.disc_mutex);
rdata = lport->tt.rport_lookup(lport, sid);
if (rdata) {
mutex_lock(&rdata->rp_mutex);
FC_RPORT_DBG(rdata, "Received LOGO request while in state %s\n",
fc_rport_state(rdata));
fc_rport_enter_delete(rdata, RPORT_EV_LOGO);
mutex_unlock(&rdata->rp_mutex);
} else
FC_RPORT_ID_DBG(lport, sid,
"Received LOGO from non-logged-in port\n");
mutex_unlock(&lport->disc.disc_mutex);
fc_frame_free(fp);
}
/**
* fc_rport_flush_queue() - Flush the rport_event_queue
*/
static void fc_rport_flush_queue(void)
{
flush_workqueue(rport_event_queue);
}
/**
* fc_rport_init() - Initialize the remote port layer for a local port
* @lport: The local port to initialize the remote port layer for
*/
int fc_rport_init(struct fc_lport *lport)
{
if (!lport->tt.rport_lookup)
lport->tt.rport_lookup = fc_rport_lookup;
if (!lport->tt.rport_create)
lport->tt.rport_create = fc_rport_create;
if (!lport->tt.rport_login)
lport->tt.rport_login = fc_rport_login;
if (!lport->tt.rport_logoff)
lport->tt.rport_logoff = fc_rport_logoff;
if (!lport->tt.rport_recv_req)
lport->tt.rport_recv_req = fc_rport_recv_req;
if (!lport->tt.rport_flush_queue)
lport->tt.rport_flush_queue = fc_rport_flush_queue;
if (!lport->tt.rport_destroy)
lport->tt.rport_destroy = fc_rport_destroy;
return 0;
}
EXPORT_SYMBOL(fc_rport_init);
/**
* fc_setup_rport() - Initialize the rport_event_queue
*/
int fc_setup_rport()
{
rport_event_queue = create_singlethread_workqueue("fc_rport_eq");
if (!rport_event_queue)
return -ENOMEM;
return 0;
}
/**
* fc_destroy_rport() - Destroy the rport_event_queue
*/
void fc_destroy_rport()
{
destroy_workqueue(rport_event_queue);
}
/**
* fc_rport_terminate_io() - Stop all outstanding I/O on a remote port
* @rport: The remote port whose I/O should be terminated
*/
void fc_rport_terminate_io(struct fc_rport *rport)
{
struct fc_rport_libfc_priv *rpriv = rport->dd_data;
struct fc_lport *lport = rpriv->local_port;
lport->tt.exch_mgr_reset(lport, 0, rport->port_id);
lport->tt.exch_mgr_reset(lport, rport->port_id, 0);
}
EXPORT_SYMBOL(fc_rport_terminate_io);