linux/drivers/mfd/axp20x-i2c.c
Uwe Kleine-König ed5c2f5fd1 i2c: Make remove callback return void
The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-16 12:46:26 +02:00

113 lines
2.8 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* I2C driver for the X-Powers' Power Management ICs
*
* AXP20x typically comprises an adaptive USB-Compatible PWM charger, BUCK DC-DC
* converters, LDOs, multiple 12-bit ADCs of voltage, current and temperature
* as well as configurable GPIOs.
*
* This driver supports the I2C variants.
*
* Copyright (C) 2014 Carlo Caione
*
* Author: Carlo Caione <carlo@caione.org>
*/
#include <linux/acpi.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/mfd/axp20x.h>
#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/slab.h>
static int axp20x_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct axp20x_dev *axp20x;
int ret;
axp20x = devm_kzalloc(&i2c->dev, sizeof(*axp20x), GFP_KERNEL);
if (!axp20x)
return -ENOMEM;
axp20x->dev = &i2c->dev;
axp20x->irq = i2c->irq;
dev_set_drvdata(axp20x->dev, axp20x);
ret = axp20x_match_device(axp20x);
if (ret)
return ret;
axp20x->regmap = devm_regmap_init_i2c(i2c, axp20x->regmap_cfg);
if (IS_ERR(axp20x->regmap)) {
ret = PTR_ERR(axp20x->regmap);
dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
return ret;
}
return axp20x_device_probe(axp20x);
}
static void axp20x_i2c_remove(struct i2c_client *i2c)
{
struct axp20x_dev *axp20x = i2c_get_clientdata(i2c);
axp20x_device_remove(axp20x);
}
#ifdef CONFIG_OF
static const struct of_device_id axp20x_i2c_of_match[] = {
{ .compatible = "x-powers,axp152", .data = (void *)AXP152_ID },
{ .compatible = "x-powers,axp202", .data = (void *)AXP202_ID },
{ .compatible = "x-powers,axp209", .data = (void *)AXP209_ID },
{ .compatible = "x-powers,axp221", .data = (void *)AXP221_ID },
{ .compatible = "x-powers,axp223", .data = (void *)AXP223_ID },
{ .compatible = "x-powers,axp803", .data = (void *)AXP803_ID },
{ .compatible = "x-powers,axp806", .data = (void *)AXP806_ID },
{ },
};
MODULE_DEVICE_TABLE(of, axp20x_i2c_of_match);
#endif
static const struct i2c_device_id axp20x_i2c_id[] = {
{ "axp152", 0 },
{ "axp202", 0 },
{ "axp209", 0 },
{ "axp221", 0 },
{ "axp223", 0 },
{ "axp803", 0 },
{ "axp806", 0 },
{ },
};
MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id);
#ifdef CONFIG_ACPI
static const struct acpi_device_id axp20x_i2c_acpi_match[] = {
{
.id = "INT33F4",
.driver_data = AXP288_ID,
},
{ },
};
MODULE_DEVICE_TABLE(acpi, axp20x_i2c_acpi_match);
#endif
static struct i2c_driver axp20x_i2c_driver = {
.driver = {
.name = "axp20x-i2c",
.of_match_table = of_match_ptr(axp20x_i2c_of_match),
.acpi_match_table = ACPI_PTR(axp20x_i2c_acpi_match),
},
.probe = axp20x_i2c_probe,
.remove = axp20x_i2c_remove,
.id_table = axp20x_i2c_id,
};
module_i2c_driver(axp20x_i2c_driver);
MODULE_DESCRIPTION("PMIC MFD I2C driver for AXP20X");
MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
MODULE_LICENSE("GPL");