mirror of
https://github.com/torvalds/linux.git
synced 2024-12-14 23:25:54 +00:00
a1dca8774f
Starting with 6.0-rc1 the CPU DAI is not registered and the sound
card is unavailable. Adding legacy_dai_naming causes it to function
properly again.
Fixes: fc34ece41f
("ASoC: Refactor non_legacy_dai_naming flag")
Signed-off-by: Jason Montleon <jmontleo@redhat.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221103144612.4431-2-jmontleo@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
638 lines
18 KiB
C
638 lines
18 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* rt5677-spi.c -- RT5677 ALSA SoC audio codec driver
|
|
*
|
|
* Copyright 2013 Realtek Semiconductor Corp.
|
|
* Author: Oder Chiou <oder_chiou@realtek.com>
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/input.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/device.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/pm_qos.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/acpi.h>
|
|
|
|
#include <sound/soc.h>
|
|
|
|
#include "rt5677.h"
|
|
#include "rt5677-spi.h"
|
|
|
|
#define DRV_NAME "rt5677spi"
|
|
|
|
#define RT5677_SPI_BURST_LEN 240
|
|
#define RT5677_SPI_HEADER 5
|
|
#define RT5677_SPI_FREQ 6000000
|
|
|
|
/* The AddressPhase and DataPhase of SPI commands are MSB first on the wire.
|
|
* DataPhase word size of 16-bit commands is 2 bytes.
|
|
* DataPhase word size of 32-bit commands is 4 bytes.
|
|
* DataPhase word size of burst commands is 8 bytes.
|
|
* The DSP CPU is little-endian.
|
|
*/
|
|
#define RT5677_SPI_WRITE_BURST 0x5
|
|
#define RT5677_SPI_READ_BURST 0x4
|
|
#define RT5677_SPI_WRITE_32 0x3
|
|
#define RT5677_SPI_READ_32 0x2
|
|
#define RT5677_SPI_WRITE_16 0x1
|
|
#define RT5677_SPI_READ_16 0x0
|
|
|
|
#define RT5677_BUF_BYTES_TOTAL 0x20000
|
|
#define RT5677_MIC_BUF_ADDR 0x60030000
|
|
#define RT5677_MODEL_ADDR 0x5FFC9800
|
|
#define RT5677_MIC_BUF_BYTES ((u32)(RT5677_BUF_BYTES_TOTAL - \
|
|
sizeof(u32)))
|
|
#define RT5677_MIC_BUF_FIRST_READ_SIZE 0x10000
|
|
|
|
static struct spi_device *g_spi;
|
|
static DEFINE_MUTEX(spi_mutex);
|
|
|
|
struct rt5677_dsp {
|
|
struct device *dev;
|
|
struct delayed_work copy_work;
|
|
struct mutex dma_lock;
|
|
struct snd_pcm_substream *substream;
|
|
size_t dma_offset; /* zero-based offset into runtime->dma_area */
|
|
size_t avail_bytes; /* number of new bytes since last period */
|
|
u32 mic_read_offset; /* zero-based offset into DSP's mic buffer */
|
|
bool new_hotword; /* a new hotword is fired */
|
|
};
|
|
|
|
static const struct snd_pcm_hardware rt5677_spi_pcm_hardware = {
|
|
.info = SNDRV_PCM_INFO_MMAP |
|
|
SNDRV_PCM_INFO_MMAP_VALID |
|
|
SNDRV_PCM_INFO_INTERLEAVED,
|
|
.formats = SNDRV_PCM_FMTBIT_S16_LE,
|
|
.period_bytes_min = PAGE_SIZE,
|
|
.period_bytes_max = RT5677_BUF_BYTES_TOTAL / 8,
|
|
.periods_min = 8,
|
|
.periods_max = 8,
|
|
.channels_min = 1,
|
|
.channels_max = 1,
|
|
.buffer_bytes_max = RT5677_BUF_BYTES_TOTAL,
|
|
};
|
|
|
|
static struct snd_soc_dai_driver rt5677_spi_dai = {
|
|
/* The DAI name "rt5677-dsp-cpu-dai" is not used. The actual DAI name
|
|
* registered with ASoC is the name of the device "spi-RT5677AA:00",
|
|
* because we only have one DAI. See snd_soc_register_dais().
|
|
*/
|
|
.name = "rt5677-dsp-cpu-dai",
|
|
.id = 0,
|
|
.capture = {
|
|
.stream_name = "DSP Capture",
|
|
.channels_min = 1,
|
|
.channels_max = 1,
|
|
.rates = SNDRV_PCM_RATE_16000,
|
|
.formats = SNDRV_PCM_FMTBIT_S16_LE,
|
|
},
|
|
};
|
|
|
|
/* PCM for streaming audio from the DSP buffer */
|
|
static int rt5677_spi_pcm_open(
|
|
struct snd_soc_component *component,
|
|
struct snd_pcm_substream *substream)
|
|
{
|
|
snd_soc_set_runtime_hwparams(substream, &rt5677_spi_pcm_hardware);
|
|
return 0;
|
|
}
|
|
|
|
static int rt5677_spi_pcm_close(
|
|
struct snd_soc_component *component,
|
|
struct snd_pcm_substream *substream)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
|
|
struct snd_soc_component *codec_component =
|
|
snd_soc_rtdcom_lookup(rtd, "rt5677");
|
|
struct rt5677_priv *rt5677 =
|
|
snd_soc_component_get_drvdata(codec_component);
|
|
struct rt5677_dsp *rt5677_dsp =
|
|
snd_soc_component_get_drvdata(component);
|
|
|
|
cancel_delayed_work_sync(&rt5677_dsp->copy_work);
|
|
rt5677->set_dsp_vad(codec_component, false);
|
|
return 0;
|
|
}
|
|
|
|
static int rt5677_spi_hw_params(
|
|
struct snd_soc_component *component,
|
|
struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *hw_params)
|
|
{
|
|
struct rt5677_dsp *rt5677_dsp =
|
|
snd_soc_component_get_drvdata(component);
|
|
|
|
mutex_lock(&rt5677_dsp->dma_lock);
|
|
rt5677_dsp->substream = substream;
|
|
mutex_unlock(&rt5677_dsp->dma_lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rt5677_spi_hw_free(
|
|
struct snd_soc_component *component,
|
|
struct snd_pcm_substream *substream)
|
|
{
|
|
struct rt5677_dsp *rt5677_dsp =
|
|
snd_soc_component_get_drvdata(component);
|
|
|
|
mutex_lock(&rt5677_dsp->dma_lock);
|
|
rt5677_dsp->substream = NULL;
|
|
mutex_unlock(&rt5677_dsp->dma_lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rt5677_spi_prepare(
|
|
struct snd_soc_component *component,
|
|
struct snd_pcm_substream *substream)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
|
|
struct snd_soc_component *rt5677_component =
|
|
snd_soc_rtdcom_lookup(rtd, "rt5677");
|
|
struct rt5677_priv *rt5677 =
|
|
snd_soc_component_get_drvdata(rt5677_component);
|
|
struct rt5677_dsp *rt5677_dsp =
|
|
snd_soc_component_get_drvdata(component);
|
|
|
|
rt5677->set_dsp_vad(rt5677_component, true);
|
|
rt5677_dsp->dma_offset = 0;
|
|
rt5677_dsp->avail_bytes = 0;
|
|
return 0;
|
|
}
|
|
|
|
static snd_pcm_uframes_t rt5677_spi_pcm_pointer(
|
|
struct snd_soc_component *component,
|
|
struct snd_pcm_substream *substream)
|
|
{
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
|
struct rt5677_dsp *rt5677_dsp =
|
|
snd_soc_component_get_drvdata(component);
|
|
|
|
return bytes_to_frames(runtime, rt5677_dsp->dma_offset);
|
|
}
|
|
|
|
static int rt5677_spi_mic_write_offset(u32 *mic_write_offset)
|
|
{
|
|
int ret;
|
|
/* Grab the first 4 bytes that hold the write pointer on the
|
|
* dsp, and check to make sure that it points somewhere inside the
|
|
* buffer.
|
|
*/
|
|
ret = rt5677_spi_read(RT5677_MIC_BUF_ADDR, mic_write_offset,
|
|
sizeof(u32));
|
|
if (ret)
|
|
return ret;
|
|
/* Adjust the offset so that it's zero-based */
|
|
*mic_write_offset = *mic_write_offset - sizeof(u32);
|
|
return *mic_write_offset < RT5677_MIC_BUF_BYTES ? 0 : -EFAULT;
|
|
}
|
|
|
|
/*
|
|
* Copy one contiguous block of audio samples from the DSP mic buffer to the
|
|
* dma_area of the pcm runtime. The receiving buffer may wrap around.
|
|
* @begin: start offset of the block to copy, in bytes.
|
|
* @end: offset of the first byte after the block to copy, must be greater
|
|
* than or equal to begin.
|
|
*
|
|
* Return: Zero if successful, or a negative error code on failure.
|
|
*/
|
|
static int rt5677_spi_copy_block(struct rt5677_dsp *rt5677_dsp,
|
|
u32 begin, u32 end)
|
|
{
|
|
struct snd_pcm_runtime *runtime = rt5677_dsp->substream->runtime;
|
|
size_t bytes_per_frame = frames_to_bytes(runtime, 1);
|
|
size_t first_chunk_len, second_chunk_len;
|
|
int ret;
|
|
|
|
if (begin > end || runtime->dma_bytes < 2 * bytes_per_frame) {
|
|
dev_err(rt5677_dsp->dev,
|
|
"Invalid copy from (%u, %u), dma_area size %zu\n",
|
|
begin, end, runtime->dma_bytes);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* The block to copy is empty */
|
|
if (begin == end)
|
|
return 0;
|
|
|
|
/* If the incoming chunk is too big for the receiving buffer, only the
|
|
* last "receiving buffer size - one frame" bytes are copied.
|
|
*/
|
|
if (end - begin > runtime->dma_bytes - bytes_per_frame)
|
|
begin = end - (runtime->dma_bytes - bytes_per_frame);
|
|
|
|
/* May need to split to two chunks, calculate the size of each */
|
|
first_chunk_len = end - begin;
|
|
second_chunk_len = 0;
|
|
if (rt5677_dsp->dma_offset + first_chunk_len > runtime->dma_bytes) {
|
|
/* Receiving buffer wrapped around */
|
|
second_chunk_len = first_chunk_len;
|
|
first_chunk_len = runtime->dma_bytes - rt5677_dsp->dma_offset;
|
|
second_chunk_len -= first_chunk_len;
|
|
}
|
|
|
|
/* Copy first chunk */
|
|
ret = rt5677_spi_read(RT5677_MIC_BUF_ADDR + sizeof(u32) + begin,
|
|
runtime->dma_area + rt5677_dsp->dma_offset,
|
|
first_chunk_len);
|
|
if (ret)
|
|
return ret;
|
|
rt5677_dsp->dma_offset += first_chunk_len;
|
|
if (rt5677_dsp->dma_offset == runtime->dma_bytes)
|
|
rt5677_dsp->dma_offset = 0;
|
|
|
|
/* Copy second chunk */
|
|
if (second_chunk_len) {
|
|
ret = rt5677_spi_read(RT5677_MIC_BUF_ADDR + sizeof(u32) +
|
|
begin + first_chunk_len, runtime->dma_area,
|
|
second_chunk_len);
|
|
if (!ret)
|
|
rt5677_dsp->dma_offset = second_chunk_len;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Copy a given amount of audio samples from the DSP mic buffer starting at
|
|
* mic_read_offset, to the dma_area of the pcm runtime. The source buffer may
|
|
* wrap around. mic_read_offset is updated after successful copy.
|
|
* @amount: amount of samples to copy, in bytes.
|
|
*
|
|
* Return: Zero if successful, or a negative error code on failure.
|
|
*/
|
|
static int rt5677_spi_copy(struct rt5677_dsp *rt5677_dsp, u32 amount)
|
|
{
|
|
int ret = 0;
|
|
u32 target;
|
|
|
|
if (amount == 0)
|
|
return ret;
|
|
|
|
target = rt5677_dsp->mic_read_offset + amount;
|
|
/* Copy the first chunk in DSP's mic buffer */
|
|
ret |= rt5677_spi_copy_block(rt5677_dsp, rt5677_dsp->mic_read_offset,
|
|
min(target, RT5677_MIC_BUF_BYTES));
|
|
|
|
if (target >= RT5677_MIC_BUF_BYTES) {
|
|
/* Wrap around, copy the second chunk */
|
|
target -= RT5677_MIC_BUF_BYTES;
|
|
ret |= rt5677_spi_copy_block(rt5677_dsp, 0, target);
|
|
}
|
|
|
|
if (!ret)
|
|
rt5677_dsp->mic_read_offset = target;
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* A delayed work that streams audio samples from the DSP mic buffer to the
|
|
* dma_area of the pcm runtime via SPI.
|
|
*/
|
|
static void rt5677_spi_copy_work(struct work_struct *work)
|
|
{
|
|
struct rt5677_dsp *rt5677_dsp =
|
|
container_of(work, struct rt5677_dsp, copy_work.work);
|
|
struct snd_pcm_runtime *runtime;
|
|
u32 mic_write_offset;
|
|
size_t new_bytes, copy_bytes, period_bytes;
|
|
unsigned int delay;
|
|
int ret = 0;
|
|
|
|
/* Ensure runtime->dma_area buffer does not go away while copying. */
|
|
mutex_lock(&rt5677_dsp->dma_lock);
|
|
if (!rt5677_dsp->substream) {
|
|
dev_err(rt5677_dsp->dev, "No pcm substream\n");
|
|
goto done;
|
|
}
|
|
|
|
runtime = rt5677_dsp->substream->runtime;
|
|
|
|
if (rt5677_spi_mic_write_offset(&mic_write_offset)) {
|
|
dev_err(rt5677_dsp->dev, "No mic_write_offset\n");
|
|
goto done;
|
|
}
|
|
|
|
/* If this is the first time that we've asked for streaming data after
|
|
* a hotword is fired, we should start reading from the previous 2
|
|
* seconds of audio from wherever the mic_write_offset is currently.
|
|
*/
|
|
if (rt5677_dsp->new_hotword) {
|
|
rt5677_dsp->new_hotword = false;
|
|
/* See if buffer wraparound happens */
|
|
if (mic_write_offset < RT5677_MIC_BUF_FIRST_READ_SIZE)
|
|
rt5677_dsp->mic_read_offset = RT5677_MIC_BUF_BYTES -
|
|
(RT5677_MIC_BUF_FIRST_READ_SIZE -
|
|
mic_write_offset);
|
|
else
|
|
rt5677_dsp->mic_read_offset = mic_write_offset -
|
|
RT5677_MIC_BUF_FIRST_READ_SIZE;
|
|
}
|
|
|
|
/* Calculate the amount of new samples in bytes */
|
|
if (rt5677_dsp->mic_read_offset <= mic_write_offset)
|
|
new_bytes = mic_write_offset - rt5677_dsp->mic_read_offset;
|
|
else
|
|
new_bytes = RT5677_MIC_BUF_BYTES + mic_write_offset
|
|
- rt5677_dsp->mic_read_offset;
|
|
|
|
/* Copy all new samples from DSP mic buffer, one period at a time */
|
|
period_bytes = snd_pcm_lib_period_bytes(rt5677_dsp->substream);
|
|
while (new_bytes) {
|
|
copy_bytes = min(new_bytes, period_bytes
|
|
- rt5677_dsp->avail_bytes);
|
|
ret = rt5677_spi_copy(rt5677_dsp, copy_bytes);
|
|
if (ret) {
|
|
dev_err(rt5677_dsp->dev, "Copy failed %d\n", ret);
|
|
goto done;
|
|
}
|
|
rt5677_dsp->avail_bytes += copy_bytes;
|
|
if (rt5677_dsp->avail_bytes >= period_bytes) {
|
|
snd_pcm_period_elapsed(rt5677_dsp->substream);
|
|
rt5677_dsp->avail_bytes = 0;
|
|
}
|
|
new_bytes -= copy_bytes;
|
|
}
|
|
|
|
delay = bytes_to_frames(runtime, period_bytes) / (runtime->rate / 1000);
|
|
schedule_delayed_work(&rt5677_dsp->copy_work, msecs_to_jiffies(delay));
|
|
done:
|
|
mutex_unlock(&rt5677_dsp->dma_lock);
|
|
}
|
|
|
|
static int rt5677_spi_pcm_new(struct snd_soc_component *component,
|
|
struct snd_soc_pcm_runtime *rtd)
|
|
{
|
|
snd_pcm_set_managed_buffer_all(rtd->pcm, SNDRV_DMA_TYPE_VMALLOC,
|
|
NULL, 0, 0);
|
|
return 0;
|
|
}
|
|
|
|
static int rt5677_spi_pcm_probe(struct snd_soc_component *component)
|
|
{
|
|
struct rt5677_dsp *rt5677_dsp;
|
|
|
|
rt5677_dsp = devm_kzalloc(component->dev, sizeof(*rt5677_dsp),
|
|
GFP_KERNEL);
|
|
if (!rt5677_dsp)
|
|
return -ENOMEM;
|
|
rt5677_dsp->dev = &g_spi->dev;
|
|
mutex_init(&rt5677_dsp->dma_lock);
|
|
INIT_DELAYED_WORK(&rt5677_dsp->copy_work, rt5677_spi_copy_work);
|
|
|
|
snd_soc_component_set_drvdata(component, rt5677_dsp);
|
|
return 0;
|
|
}
|
|
|
|
static const struct snd_soc_component_driver rt5677_spi_dai_component = {
|
|
.name = DRV_NAME,
|
|
.probe = rt5677_spi_pcm_probe,
|
|
.open = rt5677_spi_pcm_open,
|
|
.close = rt5677_spi_pcm_close,
|
|
.hw_params = rt5677_spi_hw_params,
|
|
.hw_free = rt5677_spi_hw_free,
|
|
.prepare = rt5677_spi_prepare,
|
|
.pointer = rt5677_spi_pcm_pointer,
|
|
.pcm_construct = rt5677_spi_pcm_new,
|
|
.legacy_dai_naming = 1,
|
|
};
|
|
|
|
/* Select a suitable transfer command for the next transfer to ensure
|
|
* the transfer address is always naturally aligned while minimizing
|
|
* the total number of transfers required.
|
|
*
|
|
* 3 transfer commands are available:
|
|
* RT5677_SPI_READ/WRITE_16: Transfer 2 bytes
|
|
* RT5677_SPI_READ/WRITE_32: Transfer 4 bytes
|
|
* RT5677_SPI_READ/WRITE_BURST: Transfer any multiples of 8 bytes
|
|
*
|
|
* Note:
|
|
* 16 Bit writes and reads are restricted to the address range
|
|
* 0x18020000 ~ 0x18021000
|
|
*
|
|
* For example, reading 256 bytes at 0x60030004 uses the following commands:
|
|
* 0x60030004 RT5677_SPI_READ_32 4 bytes
|
|
* 0x60030008 RT5677_SPI_READ_BURST 240 bytes
|
|
* 0x600300F8 RT5677_SPI_READ_BURST 8 bytes
|
|
* 0x60030100 RT5677_SPI_READ_32 4 bytes
|
|
*
|
|
* Input:
|
|
* @read: true for read commands; false for write commands
|
|
* @align: alignment of the next transfer address
|
|
* @remain: number of bytes remaining to transfer
|
|
*
|
|
* Output:
|
|
* @len: number of bytes to transfer with the selected command
|
|
* Returns the selected command
|
|
*/
|
|
static u8 rt5677_spi_select_cmd(bool read, u32 align, u32 remain, u32 *len)
|
|
{
|
|
u8 cmd;
|
|
|
|
if (align == 4 || remain <= 4) {
|
|
cmd = RT5677_SPI_READ_32;
|
|
*len = 4;
|
|
} else {
|
|
cmd = RT5677_SPI_READ_BURST;
|
|
*len = (((remain - 1) >> 3) + 1) << 3;
|
|
*len = min_t(u32, *len, RT5677_SPI_BURST_LEN);
|
|
}
|
|
return read ? cmd : cmd + 1;
|
|
}
|
|
|
|
/* Copy dstlen bytes from src to dst, while reversing byte order for each word.
|
|
* If srclen < dstlen, zeros are padded.
|
|
*/
|
|
static void rt5677_spi_reverse(u8 *dst, u32 dstlen, const u8 *src, u32 srclen)
|
|
{
|
|
u32 w, i, si;
|
|
u32 word_size = min_t(u32, dstlen, 8);
|
|
|
|
for (w = 0; w < dstlen; w += word_size) {
|
|
for (i = 0; i < word_size && i + w < dstlen; i++) {
|
|
si = w + word_size - i - 1;
|
|
dst[w + i] = si < srclen ? src[si] : 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Read DSP address space using SPI. addr and len have to be 4-byte aligned. */
|
|
int rt5677_spi_read(u32 addr, void *rxbuf, size_t len)
|
|
{
|
|
u32 offset;
|
|
int status = 0;
|
|
struct spi_transfer t[2];
|
|
struct spi_message m;
|
|
/* +4 bytes is for the DummyPhase following the AddressPhase */
|
|
u8 header[RT5677_SPI_HEADER + 4];
|
|
u8 body[RT5677_SPI_BURST_LEN];
|
|
u8 spi_cmd;
|
|
u8 *cb = rxbuf;
|
|
|
|
if (!g_spi)
|
|
return -ENODEV;
|
|
|
|
if ((addr & 3) || (len & 3)) {
|
|
dev_err(&g_spi->dev, "Bad read align 0x%x(%zu)\n", addr, len);
|
|
return -EACCES;
|
|
}
|
|
|
|
memset(t, 0, sizeof(t));
|
|
t[0].tx_buf = header;
|
|
t[0].len = sizeof(header);
|
|
t[0].speed_hz = RT5677_SPI_FREQ;
|
|
t[1].rx_buf = body;
|
|
t[1].speed_hz = RT5677_SPI_FREQ;
|
|
spi_message_init_with_transfers(&m, t, ARRAY_SIZE(t));
|
|
|
|
for (offset = 0; offset < len; offset += t[1].len) {
|
|
spi_cmd = rt5677_spi_select_cmd(true, (addr + offset) & 7,
|
|
len - offset, &t[1].len);
|
|
|
|
/* Construct SPI message header */
|
|
header[0] = spi_cmd;
|
|
header[1] = ((addr + offset) & 0xff000000) >> 24;
|
|
header[2] = ((addr + offset) & 0x00ff0000) >> 16;
|
|
header[3] = ((addr + offset) & 0x0000ff00) >> 8;
|
|
header[4] = ((addr + offset) & 0x000000ff) >> 0;
|
|
|
|
mutex_lock(&spi_mutex);
|
|
status |= spi_sync(g_spi, &m);
|
|
mutex_unlock(&spi_mutex);
|
|
|
|
|
|
/* Copy data back to caller buffer */
|
|
rt5677_spi_reverse(cb + offset, len - offset, body, t[1].len);
|
|
}
|
|
return status;
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt5677_spi_read);
|
|
|
|
/* Write DSP address space using SPI. addr has to be 4-byte aligned.
|
|
* If len is not 4-byte aligned, then extra zeros are written at the end
|
|
* as padding.
|
|
*/
|
|
int rt5677_spi_write(u32 addr, const void *txbuf, size_t len)
|
|
{
|
|
u32 offset;
|
|
int status = 0;
|
|
struct spi_transfer t;
|
|
struct spi_message m;
|
|
/* +1 byte is for the DummyPhase following the DataPhase */
|
|
u8 buf[RT5677_SPI_HEADER + RT5677_SPI_BURST_LEN + 1];
|
|
u8 *body = buf + RT5677_SPI_HEADER;
|
|
u8 spi_cmd;
|
|
const u8 *cb = txbuf;
|
|
|
|
if (!g_spi)
|
|
return -ENODEV;
|
|
|
|
if (addr & 3) {
|
|
dev_err(&g_spi->dev, "Bad write align 0x%x(%zu)\n", addr, len);
|
|
return -EACCES;
|
|
}
|
|
|
|
memset(&t, 0, sizeof(t));
|
|
t.tx_buf = buf;
|
|
t.speed_hz = RT5677_SPI_FREQ;
|
|
spi_message_init_with_transfers(&m, &t, 1);
|
|
|
|
for (offset = 0; offset < len;) {
|
|
spi_cmd = rt5677_spi_select_cmd(false, (addr + offset) & 7,
|
|
len - offset, &t.len);
|
|
|
|
/* Construct SPI message header */
|
|
buf[0] = spi_cmd;
|
|
buf[1] = ((addr + offset) & 0xff000000) >> 24;
|
|
buf[2] = ((addr + offset) & 0x00ff0000) >> 16;
|
|
buf[3] = ((addr + offset) & 0x0000ff00) >> 8;
|
|
buf[4] = ((addr + offset) & 0x000000ff) >> 0;
|
|
|
|
/* Fetch data from caller buffer */
|
|
rt5677_spi_reverse(body, t.len, cb + offset, len - offset);
|
|
offset += t.len;
|
|
t.len += RT5677_SPI_HEADER + 1;
|
|
|
|
mutex_lock(&spi_mutex);
|
|
status |= spi_sync(g_spi, &m);
|
|
mutex_unlock(&spi_mutex);
|
|
}
|
|
return status;
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt5677_spi_write);
|
|
|
|
int rt5677_spi_write_firmware(u32 addr, const struct firmware *fw)
|
|
{
|
|
return rt5677_spi_write(addr, fw->data, fw->size);
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt5677_spi_write_firmware);
|
|
|
|
void rt5677_spi_hotword_detected(void)
|
|
{
|
|
struct rt5677_dsp *rt5677_dsp;
|
|
|
|
if (!g_spi)
|
|
return;
|
|
|
|
rt5677_dsp = dev_get_drvdata(&g_spi->dev);
|
|
if (!rt5677_dsp) {
|
|
dev_err(&g_spi->dev, "Can't get rt5677_dsp\n");
|
|
return;
|
|
}
|
|
|
|
mutex_lock(&rt5677_dsp->dma_lock);
|
|
dev_info(rt5677_dsp->dev, "Hotword detected\n");
|
|
rt5677_dsp->new_hotword = true;
|
|
mutex_unlock(&rt5677_dsp->dma_lock);
|
|
|
|
schedule_delayed_work(&rt5677_dsp->copy_work, 0);
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt5677_spi_hotword_detected);
|
|
|
|
static int rt5677_spi_probe(struct spi_device *spi)
|
|
{
|
|
int ret;
|
|
|
|
g_spi = spi;
|
|
|
|
ret = devm_snd_soc_register_component(&spi->dev,
|
|
&rt5677_spi_dai_component,
|
|
&rt5677_spi_dai, 1);
|
|
if (ret < 0)
|
|
dev_err(&spi->dev, "Failed to register component.\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_ACPI
|
|
static const struct acpi_device_id rt5677_spi_acpi_id[] = {
|
|
{ "RT5677AA", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, rt5677_spi_acpi_id);
|
|
#endif
|
|
|
|
static struct spi_driver rt5677_spi_driver = {
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
.acpi_match_table = ACPI_PTR(rt5677_spi_acpi_id),
|
|
},
|
|
.probe = rt5677_spi_probe,
|
|
};
|
|
module_spi_driver(rt5677_spi_driver);
|
|
|
|
MODULE_DESCRIPTION("ASoC RT5677 SPI driver");
|
|
MODULE_AUTHOR("Oder Chiou <oder_chiou@realtek.com>");
|
|
MODULE_LICENSE("GPL v2");
|