mirror of
https://github.com/torvalds/linux.git
synced 2024-12-14 23:25:54 +00:00
6b4528b553
The Awinic AW8738 is a simple audio amplifier using a single GPIO. The main difference to simple-amplifier is that there is a "one-wire pulse control" that allows configuring the amplifier to one of a few pre-defined modes. This can be used to configure the speaker-guard function (primarily the power limit for the amplifier). Add a simple driver that allows setting it up in the device tree with a specified mode number. Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com> Co-developed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20220304102452.26856-3-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
105 lines
2.6 KiB
C
105 lines
2.6 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/module.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <sound/soc.h>
|
|
|
|
struct aw8738_priv {
|
|
struct gpio_desc *gpiod_mode;
|
|
unsigned int mode;
|
|
};
|
|
|
|
static int aw8738_drv_event(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *kcontrol, int event)
|
|
{
|
|
struct snd_soc_component *c = snd_soc_dapm_to_component(w->dapm);
|
|
struct aw8738_priv *aw = snd_soc_component_get_drvdata(c);
|
|
int i;
|
|
|
|
switch (event) {
|
|
case SND_SOC_DAPM_POST_PMU:
|
|
for (i = 0; i < aw->mode; i++) {
|
|
gpiod_set_value_cansleep(aw->gpiod_mode, 0);
|
|
udelay(2);
|
|
gpiod_set_value_cansleep(aw->gpiod_mode, 1);
|
|
udelay(2);
|
|
}
|
|
msleep(40);
|
|
break;
|
|
case SND_SOC_DAPM_PRE_PMD:
|
|
gpiod_set_value_cansleep(aw->gpiod_mode, 0);
|
|
usleep_range(1000, 2000);
|
|
break;
|
|
default:
|
|
WARN(1, "Unexpected event");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct snd_soc_dapm_widget aw8738_dapm_widgets[] = {
|
|
SND_SOC_DAPM_INPUT("IN"),
|
|
SND_SOC_DAPM_OUT_DRV_E("DRV", SND_SOC_NOPM, 0, 0, NULL, 0, aw8738_drv_event,
|
|
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
|
|
SND_SOC_DAPM_OUTPUT("OUT"),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route aw8738_dapm_routes[] = {
|
|
{ "DRV", NULL, "IN" },
|
|
{ "OUT", NULL, "DRV" },
|
|
};
|
|
|
|
static const struct snd_soc_component_driver aw8738_component_driver = {
|
|
.dapm_widgets = aw8738_dapm_widgets,
|
|
.num_dapm_widgets = ARRAY_SIZE(aw8738_dapm_widgets),
|
|
.dapm_routes = aw8738_dapm_routes,
|
|
.num_dapm_routes = ARRAY_SIZE(aw8738_dapm_routes),
|
|
};
|
|
|
|
static int aw8738_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct aw8738_priv *aw;
|
|
int ret;
|
|
|
|
aw = devm_kzalloc(dev, sizeof(*aw), GFP_KERNEL);
|
|
if (!aw)
|
|
return -ENOMEM;
|
|
platform_set_drvdata(pdev, aw);
|
|
|
|
aw->gpiod_mode = devm_gpiod_get(dev, "mode", GPIOD_OUT_LOW);
|
|
if (IS_ERR(aw->gpiod_mode))
|
|
return dev_err_probe(dev, PTR_ERR(aw->gpiod_mode),
|
|
"Failed to get 'mode' gpio");
|
|
|
|
ret = device_property_read_u32(dev, "awinic,mode", &aw->mode);
|
|
if (ret)
|
|
return -EINVAL;
|
|
|
|
return devm_snd_soc_register_component(&pdev->dev,
|
|
&aw8738_component_driver,
|
|
NULL, 0);
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id aw8738_of_match[] = {
|
|
{ .compatible = "awinic,aw8738" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, aw8738_of_match);
|
|
#endif
|
|
|
|
static struct platform_driver aw8738_driver = {
|
|
.probe = aw8738_probe,
|
|
.driver = {
|
|
.name = "aw8738",
|
|
.of_match_table = of_match_ptr(aw8738_of_match),
|
|
},
|
|
};
|
|
module_platform_driver(aw8738_driver);
|
|
|
|
MODULE_DESCRIPTION("Awinic AW8738 Amplifier Driver");
|
|
MODULE_LICENSE("GPL v2");
|