mirror of
https://github.com/torvalds/linux.git
synced 2024-12-27 13:22:23 +00:00
60e1d0fb29
The ath10k reports the random_mac_addr capability to upper layer based on the service bit firmware reported. Driver sets the spoofed flag in scan_ctrl_flag to firmware if upper layer has enabled this feature in scan request. Test with QCA6174 hw3.0 and firmware-6.bin_WLAN.RM.4.4.1-00102-QCARMSWP-1, but QCA9377 is also affected. Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8511 lines
214 KiB
C
8511 lines
214 KiB
C
/*
|
|
* Copyright (c) 2005-2011 Atheros Communications Inc.
|
|
* Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
|
|
* Copyright (c) 2018, The Linux Foundation. All rights reserved.
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#include "mac.h"
|
|
|
|
#include <net/mac80211.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/acpi.h>
|
|
|
|
#include "hif.h"
|
|
#include "core.h"
|
|
#include "debug.h"
|
|
#include "wmi.h"
|
|
#include "htt.h"
|
|
#include "txrx.h"
|
|
#include "testmode.h"
|
|
#include "wmi.h"
|
|
#include "wmi-tlv.h"
|
|
#include "wmi-ops.h"
|
|
#include "wow.h"
|
|
|
|
/*********/
|
|
/* Rates */
|
|
/*********/
|
|
|
|
static struct ieee80211_rate ath10k_rates[] = {
|
|
{ .bitrate = 10,
|
|
.hw_value = ATH10K_HW_RATE_CCK_LP_1M },
|
|
{ .bitrate = 20,
|
|
.hw_value = ATH10K_HW_RATE_CCK_LP_2M,
|
|
.hw_value_short = ATH10K_HW_RATE_CCK_SP_2M,
|
|
.flags = IEEE80211_RATE_SHORT_PREAMBLE },
|
|
{ .bitrate = 55,
|
|
.hw_value = ATH10K_HW_RATE_CCK_LP_5_5M,
|
|
.hw_value_short = ATH10K_HW_RATE_CCK_SP_5_5M,
|
|
.flags = IEEE80211_RATE_SHORT_PREAMBLE },
|
|
{ .bitrate = 110,
|
|
.hw_value = ATH10K_HW_RATE_CCK_LP_11M,
|
|
.hw_value_short = ATH10K_HW_RATE_CCK_SP_11M,
|
|
.flags = IEEE80211_RATE_SHORT_PREAMBLE },
|
|
|
|
{ .bitrate = 60, .hw_value = ATH10K_HW_RATE_OFDM_6M },
|
|
{ .bitrate = 90, .hw_value = ATH10K_HW_RATE_OFDM_9M },
|
|
{ .bitrate = 120, .hw_value = ATH10K_HW_RATE_OFDM_12M },
|
|
{ .bitrate = 180, .hw_value = ATH10K_HW_RATE_OFDM_18M },
|
|
{ .bitrate = 240, .hw_value = ATH10K_HW_RATE_OFDM_24M },
|
|
{ .bitrate = 360, .hw_value = ATH10K_HW_RATE_OFDM_36M },
|
|
{ .bitrate = 480, .hw_value = ATH10K_HW_RATE_OFDM_48M },
|
|
{ .bitrate = 540, .hw_value = ATH10K_HW_RATE_OFDM_54M },
|
|
};
|
|
|
|
static struct ieee80211_rate ath10k_rates_rev2[] = {
|
|
{ .bitrate = 10,
|
|
.hw_value = ATH10K_HW_RATE_REV2_CCK_LP_1M },
|
|
{ .bitrate = 20,
|
|
.hw_value = ATH10K_HW_RATE_REV2_CCK_LP_2M,
|
|
.hw_value_short = ATH10K_HW_RATE_REV2_CCK_SP_2M,
|
|
.flags = IEEE80211_RATE_SHORT_PREAMBLE },
|
|
{ .bitrate = 55,
|
|
.hw_value = ATH10K_HW_RATE_REV2_CCK_LP_5_5M,
|
|
.hw_value_short = ATH10K_HW_RATE_REV2_CCK_SP_5_5M,
|
|
.flags = IEEE80211_RATE_SHORT_PREAMBLE },
|
|
{ .bitrate = 110,
|
|
.hw_value = ATH10K_HW_RATE_REV2_CCK_LP_11M,
|
|
.hw_value_short = ATH10K_HW_RATE_REV2_CCK_SP_11M,
|
|
.flags = IEEE80211_RATE_SHORT_PREAMBLE },
|
|
|
|
{ .bitrate = 60, .hw_value = ATH10K_HW_RATE_OFDM_6M },
|
|
{ .bitrate = 90, .hw_value = ATH10K_HW_RATE_OFDM_9M },
|
|
{ .bitrate = 120, .hw_value = ATH10K_HW_RATE_OFDM_12M },
|
|
{ .bitrate = 180, .hw_value = ATH10K_HW_RATE_OFDM_18M },
|
|
{ .bitrate = 240, .hw_value = ATH10K_HW_RATE_OFDM_24M },
|
|
{ .bitrate = 360, .hw_value = ATH10K_HW_RATE_OFDM_36M },
|
|
{ .bitrate = 480, .hw_value = ATH10K_HW_RATE_OFDM_48M },
|
|
{ .bitrate = 540, .hw_value = ATH10K_HW_RATE_OFDM_54M },
|
|
};
|
|
|
|
#define ATH10K_MAC_FIRST_OFDM_RATE_IDX 4
|
|
|
|
#define ath10k_a_rates (ath10k_rates + ATH10K_MAC_FIRST_OFDM_RATE_IDX)
|
|
#define ath10k_a_rates_size (ARRAY_SIZE(ath10k_rates) - \
|
|
ATH10K_MAC_FIRST_OFDM_RATE_IDX)
|
|
#define ath10k_g_rates (ath10k_rates + 0)
|
|
#define ath10k_g_rates_size (ARRAY_SIZE(ath10k_rates))
|
|
|
|
#define ath10k_g_rates_rev2 (ath10k_rates_rev2 + 0)
|
|
#define ath10k_g_rates_rev2_size (ARRAY_SIZE(ath10k_rates_rev2))
|
|
|
|
static bool ath10k_mac_bitrate_is_cck(int bitrate)
|
|
{
|
|
switch (bitrate) {
|
|
case 10:
|
|
case 20:
|
|
case 55:
|
|
case 110:
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static u8 ath10k_mac_bitrate_to_rate(int bitrate)
|
|
{
|
|
return DIV_ROUND_UP(bitrate, 5) |
|
|
(ath10k_mac_bitrate_is_cck(bitrate) ? BIT(7) : 0);
|
|
}
|
|
|
|
u8 ath10k_mac_hw_rate_to_idx(const struct ieee80211_supported_band *sband,
|
|
u8 hw_rate, bool cck)
|
|
{
|
|
const struct ieee80211_rate *rate;
|
|
int i;
|
|
|
|
for (i = 0; i < sband->n_bitrates; i++) {
|
|
rate = &sband->bitrates[i];
|
|
|
|
if (ath10k_mac_bitrate_is_cck(rate->bitrate) != cck)
|
|
continue;
|
|
|
|
if (rate->hw_value == hw_rate)
|
|
return i;
|
|
else if (rate->flags & IEEE80211_RATE_SHORT_PREAMBLE &&
|
|
rate->hw_value_short == hw_rate)
|
|
return i;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
u8 ath10k_mac_bitrate_to_idx(const struct ieee80211_supported_band *sband,
|
|
u32 bitrate)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < sband->n_bitrates; i++)
|
|
if (sband->bitrates[i].bitrate == bitrate)
|
|
return i;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_mac_get_max_vht_mcs_map(u16 mcs_map, int nss)
|
|
{
|
|
switch ((mcs_map >> (2 * nss)) & 0x3) {
|
|
case IEEE80211_VHT_MCS_SUPPORT_0_7: return BIT(8) - 1;
|
|
case IEEE80211_VHT_MCS_SUPPORT_0_8: return BIT(9) - 1;
|
|
case IEEE80211_VHT_MCS_SUPPORT_0_9: return BIT(10) - 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static u32
|
|
ath10k_mac_max_ht_nss(const u8 ht_mcs_mask[IEEE80211_HT_MCS_MASK_LEN])
|
|
{
|
|
int nss;
|
|
|
|
for (nss = IEEE80211_HT_MCS_MASK_LEN - 1; nss >= 0; nss--)
|
|
if (ht_mcs_mask[nss])
|
|
return nss + 1;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static u32
|
|
ath10k_mac_max_vht_nss(const u16 vht_mcs_mask[NL80211_VHT_NSS_MAX])
|
|
{
|
|
int nss;
|
|
|
|
for (nss = NL80211_VHT_NSS_MAX - 1; nss >= 0; nss--)
|
|
if (vht_mcs_mask[nss])
|
|
return nss + 1;
|
|
|
|
return 1;
|
|
}
|
|
|
|
int ath10k_mac_ext_resource_config(struct ath10k *ar, u32 val)
|
|
{
|
|
enum wmi_host_platform_type platform_type;
|
|
int ret;
|
|
|
|
if (test_bit(WMI_SERVICE_TX_MODE_DYNAMIC, ar->wmi.svc_map))
|
|
platform_type = WMI_HOST_PLATFORM_LOW_PERF;
|
|
else
|
|
platform_type = WMI_HOST_PLATFORM_HIGH_PERF;
|
|
|
|
ret = ath10k_wmi_ext_resource_config(ar, platform_type, val);
|
|
|
|
if (ret && ret != -EOPNOTSUPP) {
|
|
ath10k_warn(ar, "failed to configure ext resource: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**********/
|
|
/* Crypto */
|
|
/**********/
|
|
|
|
static int ath10k_send_key(struct ath10k_vif *arvif,
|
|
struct ieee80211_key_conf *key,
|
|
enum set_key_cmd cmd,
|
|
const u8 *macaddr, u32 flags)
|
|
{
|
|
struct ath10k *ar = arvif->ar;
|
|
struct wmi_vdev_install_key_arg arg = {
|
|
.vdev_id = arvif->vdev_id,
|
|
.key_idx = key->keyidx,
|
|
.key_len = key->keylen,
|
|
.key_data = key->key,
|
|
.key_flags = flags,
|
|
.macaddr = macaddr,
|
|
};
|
|
|
|
lockdep_assert_held(&arvif->ar->conf_mutex);
|
|
|
|
switch (key->cipher) {
|
|
case WLAN_CIPHER_SUITE_CCMP:
|
|
arg.key_cipher = WMI_CIPHER_AES_CCM;
|
|
key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV_MGMT;
|
|
break;
|
|
case WLAN_CIPHER_SUITE_TKIP:
|
|
arg.key_cipher = WMI_CIPHER_TKIP;
|
|
arg.key_txmic_len = 8;
|
|
arg.key_rxmic_len = 8;
|
|
break;
|
|
case WLAN_CIPHER_SUITE_WEP40:
|
|
case WLAN_CIPHER_SUITE_WEP104:
|
|
arg.key_cipher = WMI_CIPHER_WEP;
|
|
break;
|
|
case WLAN_CIPHER_SUITE_CCMP_256:
|
|
arg.key_cipher = WMI_CIPHER_AES_CCM;
|
|
break;
|
|
case WLAN_CIPHER_SUITE_GCMP:
|
|
case WLAN_CIPHER_SUITE_GCMP_256:
|
|
arg.key_cipher = WMI_CIPHER_AES_GCM;
|
|
break;
|
|
case WLAN_CIPHER_SUITE_BIP_GMAC_128:
|
|
case WLAN_CIPHER_SUITE_BIP_GMAC_256:
|
|
case WLAN_CIPHER_SUITE_BIP_CMAC_256:
|
|
case WLAN_CIPHER_SUITE_AES_CMAC:
|
|
WARN_ON(1);
|
|
return -EINVAL;
|
|
default:
|
|
ath10k_warn(ar, "cipher %d is not supported\n", key->cipher);
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
if (test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags))
|
|
key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
|
|
|
|
if (cmd == DISABLE_KEY) {
|
|
arg.key_cipher = WMI_CIPHER_NONE;
|
|
arg.key_data = NULL;
|
|
}
|
|
|
|
return ath10k_wmi_vdev_install_key(arvif->ar, &arg);
|
|
}
|
|
|
|
static int ath10k_install_key(struct ath10k_vif *arvif,
|
|
struct ieee80211_key_conf *key,
|
|
enum set_key_cmd cmd,
|
|
const u8 *macaddr, u32 flags)
|
|
{
|
|
struct ath10k *ar = arvif->ar;
|
|
int ret;
|
|
unsigned long time_left;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
reinit_completion(&ar->install_key_done);
|
|
|
|
if (arvif->nohwcrypt)
|
|
return 1;
|
|
|
|
ret = ath10k_send_key(arvif, key, cmd, macaddr, flags);
|
|
if (ret)
|
|
return ret;
|
|
|
|
time_left = wait_for_completion_timeout(&ar->install_key_done, 3 * HZ);
|
|
if (time_left == 0)
|
|
return -ETIMEDOUT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_install_peer_wep_keys(struct ath10k_vif *arvif,
|
|
const u8 *addr)
|
|
{
|
|
struct ath10k *ar = arvif->ar;
|
|
struct ath10k_peer *peer;
|
|
int ret;
|
|
int i;
|
|
u32 flags;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
if (WARN_ON(arvif->vif->type != NL80211_IFTYPE_AP &&
|
|
arvif->vif->type != NL80211_IFTYPE_ADHOC &&
|
|
arvif->vif->type != NL80211_IFTYPE_MESH_POINT))
|
|
return -EINVAL;
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
peer = ath10k_peer_find(ar, arvif->vdev_id, addr);
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
if (!peer)
|
|
return -ENOENT;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(arvif->wep_keys); i++) {
|
|
if (arvif->wep_keys[i] == NULL)
|
|
continue;
|
|
|
|
switch (arvif->vif->type) {
|
|
case NL80211_IFTYPE_AP:
|
|
flags = WMI_KEY_PAIRWISE;
|
|
|
|
if (arvif->def_wep_key_idx == i)
|
|
flags |= WMI_KEY_TX_USAGE;
|
|
|
|
ret = ath10k_install_key(arvif, arvif->wep_keys[i],
|
|
SET_KEY, addr, flags);
|
|
if (ret < 0)
|
|
return ret;
|
|
break;
|
|
case NL80211_IFTYPE_ADHOC:
|
|
ret = ath10k_install_key(arvif, arvif->wep_keys[i],
|
|
SET_KEY, addr,
|
|
WMI_KEY_PAIRWISE);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = ath10k_install_key(arvif, arvif->wep_keys[i],
|
|
SET_KEY, addr, WMI_KEY_GROUP);
|
|
if (ret < 0)
|
|
return ret;
|
|
break;
|
|
default:
|
|
WARN_ON(1);
|
|
return -EINVAL;
|
|
}
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
peer->keys[i] = arvif->wep_keys[i];
|
|
spin_unlock_bh(&ar->data_lock);
|
|
}
|
|
|
|
/* In some cases (notably with static WEP IBSS with multiple keys)
|
|
* multicast Tx becomes broken. Both pairwise and groupwise keys are
|
|
* installed already. Using WMI_KEY_TX_USAGE in different combinations
|
|
* didn't seem help. Using def_keyid vdev parameter seems to be
|
|
* effective so use that.
|
|
*
|
|
* FIXME: Revisit. Perhaps this can be done in a less hacky way.
|
|
*/
|
|
if (arvif->vif->type != NL80211_IFTYPE_ADHOC)
|
|
return 0;
|
|
|
|
if (arvif->def_wep_key_idx == -1)
|
|
return 0;
|
|
|
|
ret = ath10k_wmi_vdev_set_param(arvif->ar,
|
|
arvif->vdev_id,
|
|
arvif->ar->wmi.vdev_param->def_keyid,
|
|
arvif->def_wep_key_idx);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to re-set def wpa key idxon vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_clear_peer_keys(struct ath10k_vif *arvif,
|
|
const u8 *addr)
|
|
{
|
|
struct ath10k *ar = arvif->ar;
|
|
struct ath10k_peer *peer;
|
|
int first_errno = 0;
|
|
int ret;
|
|
int i;
|
|
u32 flags = 0;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
peer = ath10k_peer_find(ar, arvif->vdev_id, addr);
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
if (!peer)
|
|
return -ENOENT;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(peer->keys); i++) {
|
|
if (peer->keys[i] == NULL)
|
|
continue;
|
|
|
|
/* key flags are not required to delete the key */
|
|
ret = ath10k_install_key(arvif, peer->keys[i],
|
|
DISABLE_KEY, addr, flags);
|
|
if (ret < 0 && first_errno == 0)
|
|
first_errno = ret;
|
|
|
|
if (ret < 0)
|
|
ath10k_warn(ar, "failed to remove peer wep key %d: %d\n",
|
|
i, ret);
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
peer->keys[i] = NULL;
|
|
spin_unlock_bh(&ar->data_lock);
|
|
}
|
|
|
|
return first_errno;
|
|
}
|
|
|
|
bool ath10k_mac_is_peer_wep_key_set(struct ath10k *ar, const u8 *addr,
|
|
u8 keyidx)
|
|
{
|
|
struct ath10k_peer *peer;
|
|
int i;
|
|
|
|
lockdep_assert_held(&ar->data_lock);
|
|
|
|
/* We don't know which vdev this peer belongs to,
|
|
* since WMI doesn't give us that information.
|
|
*
|
|
* FIXME: multi-bss needs to be handled.
|
|
*/
|
|
peer = ath10k_peer_find(ar, 0, addr);
|
|
if (!peer)
|
|
return false;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(peer->keys); i++) {
|
|
if (peer->keys[i] && peer->keys[i]->keyidx == keyidx)
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static int ath10k_clear_vdev_key(struct ath10k_vif *arvif,
|
|
struct ieee80211_key_conf *key)
|
|
{
|
|
struct ath10k *ar = arvif->ar;
|
|
struct ath10k_peer *peer;
|
|
u8 addr[ETH_ALEN];
|
|
int first_errno = 0;
|
|
int ret;
|
|
int i;
|
|
u32 flags = 0;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
for (;;) {
|
|
/* since ath10k_install_key we can't hold data_lock all the
|
|
* time, so we try to remove the keys incrementally
|
|
*/
|
|
spin_lock_bh(&ar->data_lock);
|
|
i = 0;
|
|
list_for_each_entry(peer, &ar->peers, list) {
|
|
for (i = 0; i < ARRAY_SIZE(peer->keys); i++) {
|
|
if (peer->keys[i] == key) {
|
|
ether_addr_copy(addr, peer->addr);
|
|
peer->keys[i] = NULL;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (i < ARRAY_SIZE(peer->keys))
|
|
break;
|
|
}
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
if (i == ARRAY_SIZE(peer->keys))
|
|
break;
|
|
/* key flags are not required to delete the key */
|
|
ret = ath10k_install_key(arvif, key, DISABLE_KEY, addr, flags);
|
|
if (ret < 0 && first_errno == 0)
|
|
first_errno = ret;
|
|
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to remove key for %pM: %d\n",
|
|
addr, ret);
|
|
}
|
|
|
|
return first_errno;
|
|
}
|
|
|
|
static int ath10k_mac_vif_update_wep_key(struct ath10k_vif *arvif,
|
|
struct ieee80211_key_conf *key)
|
|
{
|
|
struct ath10k *ar = arvif->ar;
|
|
struct ath10k_peer *peer;
|
|
int ret;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
list_for_each_entry(peer, &ar->peers, list) {
|
|
if (ether_addr_equal(peer->addr, arvif->vif->addr))
|
|
continue;
|
|
|
|
if (ether_addr_equal(peer->addr, arvif->bssid))
|
|
continue;
|
|
|
|
if (peer->keys[key->keyidx] == key)
|
|
continue;
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vif vdev %i update key %i needs update\n",
|
|
arvif->vdev_id, key->keyidx);
|
|
|
|
ret = ath10k_install_peer_wep_keys(arvif, peer->addr);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to update wep keys on vdev %i for peer %pM: %d\n",
|
|
arvif->vdev_id, peer->addr, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*********************/
|
|
/* General utilities */
|
|
/*********************/
|
|
|
|
static inline enum wmi_phy_mode
|
|
chan_to_phymode(const struct cfg80211_chan_def *chandef)
|
|
{
|
|
enum wmi_phy_mode phymode = MODE_UNKNOWN;
|
|
|
|
switch (chandef->chan->band) {
|
|
case NL80211_BAND_2GHZ:
|
|
switch (chandef->width) {
|
|
case NL80211_CHAN_WIDTH_20_NOHT:
|
|
if (chandef->chan->flags & IEEE80211_CHAN_NO_OFDM)
|
|
phymode = MODE_11B;
|
|
else
|
|
phymode = MODE_11G;
|
|
break;
|
|
case NL80211_CHAN_WIDTH_20:
|
|
phymode = MODE_11NG_HT20;
|
|
break;
|
|
case NL80211_CHAN_WIDTH_40:
|
|
phymode = MODE_11NG_HT40;
|
|
break;
|
|
case NL80211_CHAN_WIDTH_5:
|
|
case NL80211_CHAN_WIDTH_10:
|
|
case NL80211_CHAN_WIDTH_80:
|
|
case NL80211_CHAN_WIDTH_80P80:
|
|
case NL80211_CHAN_WIDTH_160:
|
|
phymode = MODE_UNKNOWN;
|
|
break;
|
|
}
|
|
break;
|
|
case NL80211_BAND_5GHZ:
|
|
switch (chandef->width) {
|
|
case NL80211_CHAN_WIDTH_20_NOHT:
|
|
phymode = MODE_11A;
|
|
break;
|
|
case NL80211_CHAN_WIDTH_20:
|
|
phymode = MODE_11NA_HT20;
|
|
break;
|
|
case NL80211_CHAN_WIDTH_40:
|
|
phymode = MODE_11NA_HT40;
|
|
break;
|
|
case NL80211_CHAN_WIDTH_80:
|
|
phymode = MODE_11AC_VHT80;
|
|
break;
|
|
case NL80211_CHAN_WIDTH_160:
|
|
phymode = MODE_11AC_VHT160;
|
|
break;
|
|
case NL80211_CHAN_WIDTH_80P80:
|
|
phymode = MODE_11AC_VHT80_80;
|
|
break;
|
|
case NL80211_CHAN_WIDTH_5:
|
|
case NL80211_CHAN_WIDTH_10:
|
|
phymode = MODE_UNKNOWN;
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
WARN_ON(phymode == MODE_UNKNOWN);
|
|
return phymode;
|
|
}
|
|
|
|
static u8 ath10k_parse_mpdudensity(u8 mpdudensity)
|
|
{
|
|
/*
|
|
* 802.11n D2.0 defined values for "Minimum MPDU Start Spacing":
|
|
* 0 for no restriction
|
|
* 1 for 1/4 us
|
|
* 2 for 1/2 us
|
|
* 3 for 1 us
|
|
* 4 for 2 us
|
|
* 5 for 4 us
|
|
* 6 for 8 us
|
|
* 7 for 16 us
|
|
*/
|
|
switch (mpdudensity) {
|
|
case 0:
|
|
return 0;
|
|
case 1:
|
|
case 2:
|
|
case 3:
|
|
/* Our lower layer calculations limit our precision to
|
|
* 1 microsecond
|
|
*/
|
|
return 1;
|
|
case 4:
|
|
return 2;
|
|
case 5:
|
|
return 4;
|
|
case 6:
|
|
return 8;
|
|
case 7:
|
|
return 16;
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
int ath10k_mac_vif_chan(struct ieee80211_vif *vif,
|
|
struct cfg80211_chan_def *def)
|
|
{
|
|
struct ieee80211_chanctx_conf *conf;
|
|
|
|
rcu_read_lock();
|
|
conf = rcu_dereference(vif->chanctx_conf);
|
|
if (!conf) {
|
|
rcu_read_unlock();
|
|
return -ENOENT;
|
|
}
|
|
|
|
*def = conf->def;
|
|
rcu_read_unlock();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ath10k_mac_num_chanctxs_iter(struct ieee80211_hw *hw,
|
|
struct ieee80211_chanctx_conf *conf,
|
|
void *data)
|
|
{
|
|
int *num = data;
|
|
|
|
(*num)++;
|
|
}
|
|
|
|
static int ath10k_mac_num_chanctxs(struct ath10k *ar)
|
|
{
|
|
int num = 0;
|
|
|
|
ieee80211_iter_chan_contexts_atomic(ar->hw,
|
|
ath10k_mac_num_chanctxs_iter,
|
|
&num);
|
|
|
|
return num;
|
|
}
|
|
|
|
static void
|
|
ath10k_mac_get_any_chandef_iter(struct ieee80211_hw *hw,
|
|
struct ieee80211_chanctx_conf *conf,
|
|
void *data)
|
|
{
|
|
struct cfg80211_chan_def **def = data;
|
|
|
|
*def = &conf->def;
|
|
}
|
|
|
|
static int ath10k_peer_create(struct ath10k *ar,
|
|
struct ieee80211_vif *vif,
|
|
struct ieee80211_sta *sta,
|
|
u32 vdev_id,
|
|
const u8 *addr,
|
|
enum wmi_peer_type peer_type)
|
|
{
|
|
struct ath10k_vif *arvif;
|
|
struct ath10k_peer *peer;
|
|
int num_peers = 0;
|
|
int ret;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
num_peers = ar->num_peers;
|
|
|
|
/* Each vdev consumes a peer entry as well */
|
|
list_for_each_entry(arvif, &ar->arvifs, list)
|
|
num_peers++;
|
|
|
|
if (num_peers >= ar->max_num_peers)
|
|
return -ENOBUFS;
|
|
|
|
ret = ath10k_wmi_peer_create(ar, vdev_id, addr, peer_type);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to create wmi peer %pM on vdev %i: %i\n",
|
|
addr, vdev_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = ath10k_wait_for_peer_created(ar, vdev_id, addr);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to wait for created wmi peer %pM on vdev %i: %i\n",
|
|
addr, vdev_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
|
|
peer = ath10k_peer_find(ar, vdev_id, addr);
|
|
if (!peer) {
|
|
spin_unlock_bh(&ar->data_lock);
|
|
ath10k_warn(ar, "failed to find peer %pM on vdev %i after creation\n",
|
|
addr, vdev_id);
|
|
ath10k_wmi_peer_delete(ar, vdev_id, addr);
|
|
return -ENOENT;
|
|
}
|
|
|
|
peer->vif = vif;
|
|
peer->sta = sta;
|
|
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
ar->num_peers++;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_mac_set_kickout(struct ath10k_vif *arvif)
|
|
{
|
|
struct ath10k *ar = arvif->ar;
|
|
u32 param;
|
|
int ret;
|
|
|
|
param = ar->wmi.pdev_param->sta_kickout_th;
|
|
ret = ath10k_wmi_pdev_set_param(ar, param,
|
|
ATH10K_KICKOUT_THRESHOLD);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to set kickout threshold on vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
param = ar->wmi.vdev_param->ap_keepalive_min_idle_inactive_time_secs;
|
|
ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, param,
|
|
ATH10K_KEEPALIVE_MIN_IDLE);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to set keepalive minimum idle time on vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
param = ar->wmi.vdev_param->ap_keepalive_max_idle_inactive_time_secs;
|
|
ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, param,
|
|
ATH10K_KEEPALIVE_MAX_IDLE);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to set keepalive maximum idle time on vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
param = ar->wmi.vdev_param->ap_keepalive_max_unresponsive_time_secs;
|
|
ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, param,
|
|
ATH10K_KEEPALIVE_MAX_UNRESPONSIVE);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to set keepalive maximum unresponsive time on vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_mac_set_rts(struct ath10k_vif *arvif, u32 value)
|
|
{
|
|
struct ath10k *ar = arvif->ar;
|
|
u32 vdev_param;
|
|
|
|
vdev_param = ar->wmi.vdev_param->rts_threshold;
|
|
return ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, value);
|
|
}
|
|
|
|
static int ath10k_peer_delete(struct ath10k *ar, u32 vdev_id, const u8 *addr)
|
|
{
|
|
int ret;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
ret = ath10k_wmi_peer_delete(ar, vdev_id, addr);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ath10k_wait_for_peer_deleted(ar, vdev_id, addr);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ar->num_peers--;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ath10k_peer_cleanup(struct ath10k *ar, u32 vdev_id)
|
|
{
|
|
struct ath10k_peer *peer, *tmp;
|
|
int peer_id;
|
|
int i;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
list_for_each_entry_safe(peer, tmp, &ar->peers, list) {
|
|
if (peer->vdev_id != vdev_id)
|
|
continue;
|
|
|
|
ath10k_warn(ar, "removing stale peer %pM from vdev_id %d\n",
|
|
peer->addr, vdev_id);
|
|
|
|
for_each_set_bit(peer_id, peer->peer_ids,
|
|
ATH10K_MAX_NUM_PEER_IDS) {
|
|
ar->peer_map[peer_id] = NULL;
|
|
}
|
|
|
|
/* Double check that peer is properly un-referenced from
|
|
* the peer_map
|
|
*/
|
|
for (i = 0; i < ARRAY_SIZE(ar->peer_map); i++) {
|
|
if (ar->peer_map[i] == peer) {
|
|
ath10k_warn(ar, "removing stale peer_map entry for %pM (ptr %pK idx %d)\n",
|
|
peer->addr, peer, i);
|
|
ar->peer_map[i] = NULL;
|
|
}
|
|
}
|
|
|
|
list_del(&peer->list);
|
|
kfree(peer);
|
|
ar->num_peers--;
|
|
}
|
|
spin_unlock_bh(&ar->data_lock);
|
|
}
|
|
|
|
static void ath10k_peer_cleanup_all(struct ath10k *ar)
|
|
{
|
|
struct ath10k_peer *peer, *tmp;
|
|
int i;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
list_for_each_entry_safe(peer, tmp, &ar->peers, list) {
|
|
list_del(&peer->list);
|
|
kfree(peer);
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ar->peer_map); i++)
|
|
ar->peer_map[i] = NULL;
|
|
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
ar->num_peers = 0;
|
|
ar->num_stations = 0;
|
|
}
|
|
|
|
static int ath10k_mac_tdls_peer_update(struct ath10k *ar, u32 vdev_id,
|
|
struct ieee80211_sta *sta,
|
|
enum wmi_tdls_peer_state state)
|
|
{
|
|
int ret;
|
|
struct wmi_tdls_peer_update_cmd_arg arg = {};
|
|
struct wmi_tdls_peer_capab_arg cap = {};
|
|
struct wmi_channel_arg chan_arg = {};
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
arg.vdev_id = vdev_id;
|
|
arg.peer_state = state;
|
|
ether_addr_copy(arg.addr, sta->addr);
|
|
|
|
cap.peer_max_sp = sta->max_sp;
|
|
cap.peer_uapsd_queues = sta->uapsd_queues;
|
|
|
|
if (state == WMI_TDLS_PEER_STATE_CONNECTED &&
|
|
!sta->tdls_initiator)
|
|
cap.is_peer_responder = 1;
|
|
|
|
ret = ath10k_wmi_tdls_peer_update(ar, &arg, &cap, &chan_arg);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to update tdls peer %pM on vdev %i: %i\n",
|
|
arg.addr, vdev_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/************************/
|
|
/* Interface management */
|
|
/************************/
|
|
|
|
void ath10k_mac_vif_beacon_free(struct ath10k_vif *arvif)
|
|
{
|
|
struct ath10k *ar = arvif->ar;
|
|
|
|
lockdep_assert_held(&ar->data_lock);
|
|
|
|
if (!arvif->beacon)
|
|
return;
|
|
|
|
if (!arvif->beacon_buf)
|
|
dma_unmap_single(ar->dev, ATH10K_SKB_CB(arvif->beacon)->paddr,
|
|
arvif->beacon->len, DMA_TO_DEVICE);
|
|
|
|
if (WARN_ON(arvif->beacon_state != ATH10K_BEACON_SCHEDULED &&
|
|
arvif->beacon_state != ATH10K_BEACON_SENT))
|
|
return;
|
|
|
|
dev_kfree_skb_any(arvif->beacon);
|
|
|
|
arvif->beacon = NULL;
|
|
arvif->beacon_state = ATH10K_BEACON_SCHEDULED;
|
|
}
|
|
|
|
static void ath10k_mac_vif_beacon_cleanup(struct ath10k_vif *arvif)
|
|
{
|
|
struct ath10k *ar = arvif->ar;
|
|
|
|
lockdep_assert_held(&ar->data_lock);
|
|
|
|
ath10k_mac_vif_beacon_free(arvif);
|
|
|
|
if (arvif->beacon_buf) {
|
|
dma_free_coherent(ar->dev, IEEE80211_MAX_FRAME_LEN,
|
|
arvif->beacon_buf, arvif->beacon_paddr);
|
|
arvif->beacon_buf = NULL;
|
|
}
|
|
}
|
|
|
|
static inline int ath10k_vdev_setup_sync(struct ath10k *ar)
|
|
{
|
|
unsigned long time_left;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
if (test_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags))
|
|
return -ESHUTDOWN;
|
|
|
|
time_left = wait_for_completion_timeout(&ar->vdev_setup_done,
|
|
ATH10K_VDEV_SETUP_TIMEOUT_HZ);
|
|
if (time_left == 0)
|
|
return -ETIMEDOUT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_monitor_vdev_start(struct ath10k *ar, int vdev_id)
|
|
{
|
|
struct cfg80211_chan_def *chandef = NULL;
|
|
struct ieee80211_channel *channel = NULL;
|
|
struct wmi_vdev_start_request_arg arg = {};
|
|
int ret = 0;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
ieee80211_iter_chan_contexts_atomic(ar->hw,
|
|
ath10k_mac_get_any_chandef_iter,
|
|
&chandef);
|
|
if (WARN_ON_ONCE(!chandef))
|
|
return -ENOENT;
|
|
|
|
channel = chandef->chan;
|
|
|
|
arg.vdev_id = vdev_id;
|
|
arg.channel.freq = channel->center_freq;
|
|
arg.channel.band_center_freq1 = chandef->center_freq1;
|
|
arg.channel.band_center_freq2 = chandef->center_freq2;
|
|
|
|
/* TODO setup this dynamically, what in case we
|
|
* don't have any vifs?
|
|
*/
|
|
arg.channel.mode = chan_to_phymode(chandef);
|
|
arg.channel.chan_radar =
|
|
!!(channel->flags & IEEE80211_CHAN_RADAR);
|
|
|
|
arg.channel.min_power = 0;
|
|
arg.channel.max_power = channel->max_power * 2;
|
|
arg.channel.max_reg_power = channel->max_reg_power * 2;
|
|
arg.channel.max_antenna_gain = channel->max_antenna_gain * 2;
|
|
|
|
reinit_completion(&ar->vdev_setup_done);
|
|
|
|
ret = ath10k_wmi_vdev_start(ar, &arg);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to request monitor vdev %i start: %d\n",
|
|
vdev_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = ath10k_vdev_setup_sync(ar);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to synchronize setup for monitor vdev %i start: %d\n",
|
|
vdev_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = ath10k_wmi_vdev_up(ar, vdev_id, 0, ar->mac_addr);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to put up monitor vdev %i: %d\n",
|
|
vdev_id, ret);
|
|
goto vdev_stop;
|
|
}
|
|
|
|
ar->monitor_vdev_id = vdev_id;
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor vdev %i started\n",
|
|
ar->monitor_vdev_id);
|
|
return 0;
|
|
|
|
vdev_stop:
|
|
ret = ath10k_wmi_vdev_stop(ar, ar->monitor_vdev_id);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to stop monitor vdev %i after start failure: %d\n",
|
|
ar->monitor_vdev_id, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ath10k_monitor_vdev_stop(struct ath10k *ar)
|
|
{
|
|
int ret = 0;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
ret = ath10k_wmi_vdev_down(ar, ar->monitor_vdev_id);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to put down monitor vdev %i: %d\n",
|
|
ar->monitor_vdev_id, ret);
|
|
|
|
reinit_completion(&ar->vdev_setup_done);
|
|
|
|
ret = ath10k_wmi_vdev_stop(ar, ar->monitor_vdev_id);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to to request monitor vdev %i stop: %d\n",
|
|
ar->monitor_vdev_id, ret);
|
|
|
|
ret = ath10k_vdev_setup_sync(ar);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to synchronize monitor vdev %i stop: %d\n",
|
|
ar->monitor_vdev_id, ret);
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor vdev %i stopped\n",
|
|
ar->monitor_vdev_id);
|
|
return ret;
|
|
}
|
|
|
|
static int ath10k_monitor_vdev_create(struct ath10k *ar)
|
|
{
|
|
int bit, ret = 0;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
if (ar->free_vdev_map == 0) {
|
|
ath10k_warn(ar, "failed to find free vdev id for monitor vdev\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
bit = __ffs64(ar->free_vdev_map);
|
|
|
|
ar->monitor_vdev_id = bit;
|
|
|
|
ret = ath10k_wmi_vdev_create(ar, ar->monitor_vdev_id,
|
|
WMI_VDEV_TYPE_MONITOR,
|
|
0, ar->mac_addr);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to request monitor vdev %i creation: %d\n",
|
|
ar->monitor_vdev_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
ar->free_vdev_map &= ~(1LL << ar->monitor_vdev_id);
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor vdev %d created\n",
|
|
ar->monitor_vdev_id);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_monitor_vdev_delete(struct ath10k *ar)
|
|
{
|
|
int ret = 0;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
ret = ath10k_wmi_vdev_delete(ar, ar->monitor_vdev_id);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to request wmi monitor vdev %i removal: %d\n",
|
|
ar->monitor_vdev_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
ar->free_vdev_map |= 1LL << ar->monitor_vdev_id;
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor vdev %d deleted\n",
|
|
ar->monitor_vdev_id);
|
|
return ret;
|
|
}
|
|
|
|
static int ath10k_monitor_start(struct ath10k *ar)
|
|
{
|
|
int ret;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
ret = ath10k_monitor_vdev_create(ar);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to create monitor vdev: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = ath10k_monitor_vdev_start(ar, ar->monitor_vdev_id);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to start monitor vdev: %d\n", ret);
|
|
ath10k_monitor_vdev_delete(ar);
|
|
return ret;
|
|
}
|
|
|
|
ar->monitor_started = true;
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor started\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_monitor_stop(struct ath10k *ar)
|
|
{
|
|
int ret;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
ret = ath10k_monitor_vdev_stop(ar);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to stop monitor vdev: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = ath10k_monitor_vdev_delete(ar);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to delete monitor vdev: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ar->monitor_started = false;
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor stopped\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool ath10k_mac_monitor_vdev_is_needed(struct ath10k *ar)
|
|
{
|
|
int num_ctx;
|
|
|
|
/* At least one chanctx is required to derive a channel to start
|
|
* monitor vdev on.
|
|
*/
|
|
num_ctx = ath10k_mac_num_chanctxs(ar);
|
|
if (num_ctx == 0)
|
|
return false;
|
|
|
|
/* If there's already an existing special monitor interface then don't
|
|
* bother creating another monitor vdev.
|
|
*/
|
|
if (ar->monitor_arvif)
|
|
return false;
|
|
|
|
return ar->monitor ||
|
|
(!test_bit(ATH10K_FW_FEATURE_ALLOWS_MESH_BCAST,
|
|
ar->running_fw->fw_file.fw_features) &&
|
|
(ar->filter_flags & FIF_OTHER_BSS)) ||
|
|
test_bit(ATH10K_CAC_RUNNING, &ar->dev_flags);
|
|
}
|
|
|
|
static bool ath10k_mac_monitor_vdev_is_allowed(struct ath10k *ar)
|
|
{
|
|
int num_ctx;
|
|
|
|
num_ctx = ath10k_mac_num_chanctxs(ar);
|
|
|
|
/* FIXME: Current interface combinations and cfg80211/mac80211 code
|
|
* shouldn't allow this but make sure to prevent handling the following
|
|
* case anyway since multi-channel DFS hasn't been tested at all.
|
|
*/
|
|
if (test_bit(ATH10K_CAC_RUNNING, &ar->dev_flags) && num_ctx > 1)
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
static int ath10k_monitor_recalc(struct ath10k *ar)
|
|
{
|
|
bool needed;
|
|
bool allowed;
|
|
int ret;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
needed = ath10k_mac_monitor_vdev_is_needed(ar);
|
|
allowed = ath10k_mac_monitor_vdev_is_allowed(ar);
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC,
|
|
"mac monitor recalc started? %d needed? %d allowed? %d\n",
|
|
ar->monitor_started, needed, allowed);
|
|
|
|
if (WARN_ON(needed && !allowed)) {
|
|
if (ar->monitor_started) {
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor stopping disallowed monitor\n");
|
|
|
|
ret = ath10k_monitor_stop(ar);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to stop disallowed monitor: %d\n",
|
|
ret);
|
|
/* not serious */
|
|
}
|
|
|
|
return -EPERM;
|
|
}
|
|
|
|
if (needed == ar->monitor_started)
|
|
return 0;
|
|
|
|
if (needed)
|
|
return ath10k_monitor_start(ar);
|
|
else
|
|
return ath10k_monitor_stop(ar);
|
|
}
|
|
|
|
static bool ath10k_mac_can_set_cts_prot(struct ath10k_vif *arvif)
|
|
{
|
|
struct ath10k *ar = arvif->ar;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
if (!arvif->is_started) {
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "defer cts setup, vdev is not ready yet\n");
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static int ath10k_mac_set_cts_prot(struct ath10k_vif *arvif)
|
|
{
|
|
struct ath10k *ar = arvif->ar;
|
|
u32 vdev_param;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
vdev_param = ar->wmi.vdev_param->protection_mode;
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d cts_protection %d\n",
|
|
arvif->vdev_id, arvif->use_cts_prot);
|
|
|
|
return ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
|
|
arvif->use_cts_prot ? 1 : 0);
|
|
}
|
|
|
|
static int ath10k_recalc_rtscts_prot(struct ath10k_vif *arvif)
|
|
{
|
|
struct ath10k *ar = arvif->ar;
|
|
u32 vdev_param, rts_cts = 0;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
vdev_param = ar->wmi.vdev_param->enable_rtscts;
|
|
|
|
rts_cts |= SM(WMI_RTSCTS_ENABLED, WMI_RTSCTS_SET);
|
|
|
|
if (arvif->num_legacy_stations > 0)
|
|
rts_cts |= SM(WMI_RTSCTS_ACROSS_SW_RETRIES,
|
|
WMI_RTSCTS_PROFILE);
|
|
else
|
|
rts_cts |= SM(WMI_RTSCTS_FOR_SECOND_RATESERIES,
|
|
WMI_RTSCTS_PROFILE);
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d recalc rts/cts prot %d\n",
|
|
arvif->vdev_id, rts_cts);
|
|
|
|
return ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
|
|
rts_cts);
|
|
}
|
|
|
|
static int ath10k_start_cac(struct ath10k *ar)
|
|
{
|
|
int ret;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
set_bit(ATH10K_CAC_RUNNING, &ar->dev_flags);
|
|
|
|
ret = ath10k_monitor_recalc(ar);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to start monitor (cac): %d\n", ret);
|
|
clear_bit(ATH10K_CAC_RUNNING, &ar->dev_flags);
|
|
return ret;
|
|
}
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac cac start monitor vdev %d\n",
|
|
ar->monitor_vdev_id);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_stop_cac(struct ath10k *ar)
|
|
{
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
/* CAC is not running - do nothing */
|
|
if (!test_bit(ATH10K_CAC_RUNNING, &ar->dev_flags))
|
|
return 0;
|
|
|
|
clear_bit(ATH10K_CAC_RUNNING, &ar->dev_flags);
|
|
ath10k_monitor_stop(ar);
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac cac finished\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ath10k_mac_has_radar_iter(struct ieee80211_hw *hw,
|
|
struct ieee80211_chanctx_conf *conf,
|
|
void *data)
|
|
{
|
|
bool *ret = data;
|
|
|
|
if (!*ret && conf->radar_enabled)
|
|
*ret = true;
|
|
}
|
|
|
|
static bool ath10k_mac_has_radar_enabled(struct ath10k *ar)
|
|
{
|
|
bool has_radar = false;
|
|
|
|
ieee80211_iter_chan_contexts_atomic(ar->hw,
|
|
ath10k_mac_has_radar_iter,
|
|
&has_radar);
|
|
|
|
return has_radar;
|
|
}
|
|
|
|
static void ath10k_recalc_radar_detection(struct ath10k *ar)
|
|
{
|
|
int ret;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
ath10k_stop_cac(ar);
|
|
|
|
if (!ath10k_mac_has_radar_enabled(ar))
|
|
return;
|
|
|
|
if (ar->num_started_vdevs > 0)
|
|
return;
|
|
|
|
ret = ath10k_start_cac(ar);
|
|
if (ret) {
|
|
/*
|
|
* Not possible to start CAC on current channel so starting
|
|
* radiation is not allowed, make this channel DFS_UNAVAILABLE
|
|
* by indicating that radar was detected.
|
|
*/
|
|
ath10k_warn(ar, "failed to start CAC: %d\n", ret);
|
|
ieee80211_radar_detected(ar->hw);
|
|
}
|
|
}
|
|
|
|
static int ath10k_vdev_stop(struct ath10k_vif *arvif)
|
|
{
|
|
struct ath10k *ar = arvif->ar;
|
|
int ret;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
reinit_completion(&ar->vdev_setup_done);
|
|
|
|
ret = ath10k_wmi_vdev_stop(ar, arvif->vdev_id);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to stop WMI vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = ath10k_vdev_setup_sync(ar);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to synchronize setup for vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
WARN_ON(ar->num_started_vdevs == 0);
|
|
|
|
if (ar->num_started_vdevs != 0) {
|
|
ar->num_started_vdevs--;
|
|
ath10k_recalc_radar_detection(ar);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ath10k_vdev_start_restart(struct ath10k_vif *arvif,
|
|
const struct cfg80211_chan_def *chandef,
|
|
bool restart)
|
|
{
|
|
struct ath10k *ar = arvif->ar;
|
|
struct wmi_vdev_start_request_arg arg = {};
|
|
int ret = 0;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
reinit_completion(&ar->vdev_setup_done);
|
|
|
|
arg.vdev_id = arvif->vdev_id;
|
|
arg.dtim_period = arvif->dtim_period;
|
|
arg.bcn_intval = arvif->beacon_interval;
|
|
|
|
arg.channel.freq = chandef->chan->center_freq;
|
|
arg.channel.band_center_freq1 = chandef->center_freq1;
|
|
arg.channel.band_center_freq2 = chandef->center_freq2;
|
|
arg.channel.mode = chan_to_phymode(chandef);
|
|
|
|
arg.channel.min_power = 0;
|
|
arg.channel.max_power = chandef->chan->max_power * 2;
|
|
arg.channel.max_reg_power = chandef->chan->max_reg_power * 2;
|
|
arg.channel.max_antenna_gain = chandef->chan->max_antenna_gain * 2;
|
|
|
|
if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
|
|
arg.ssid = arvif->u.ap.ssid;
|
|
arg.ssid_len = arvif->u.ap.ssid_len;
|
|
arg.hidden_ssid = arvif->u.ap.hidden_ssid;
|
|
|
|
/* For now allow DFS for AP mode */
|
|
arg.channel.chan_radar =
|
|
!!(chandef->chan->flags & IEEE80211_CHAN_RADAR);
|
|
} else if (arvif->vdev_type == WMI_VDEV_TYPE_IBSS) {
|
|
arg.ssid = arvif->vif->bss_conf.ssid;
|
|
arg.ssid_len = arvif->vif->bss_conf.ssid_len;
|
|
}
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC,
|
|
"mac vdev %d start center_freq %d phymode %s\n",
|
|
arg.vdev_id, arg.channel.freq,
|
|
ath10k_wmi_phymode_str(arg.channel.mode));
|
|
|
|
if (restart)
|
|
ret = ath10k_wmi_vdev_restart(ar, &arg);
|
|
else
|
|
ret = ath10k_wmi_vdev_start(ar, &arg);
|
|
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to start WMI vdev %i: %d\n",
|
|
arg.vdev_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = ath10k_vdev_setup_sync(ar);
|
|
if (ret) {
|
|
ath10k_warn(ar,
|
|
"failed to synchronize setup for vdev %i restart %d: %d\n",
|
|
arg.vdev_id, restart, ret);
|
|
return ret;
|
|
}
|
|
|
|
ar->num_started_vdevs++;
|
|
ath10k_recalc_radar_detection(ar);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ath10k_vdev_start(struct ath10k_vif *arvif,
|
|
const struct cfg80211_chan_def *def)
|
|
{
|
|
return ath10k_vdev_start_restart(arvif, def, false);
|
|
}
|
|
|
|
static int ath10k_vdev_restart(struct ath10k_vif *arvif,
|
|
const struct cfg80211_chan_def *def)
|
|
{
|
|
return ath10k_vdev_start_restart(arvif, def, true);
|
|
}
|
|
|
|
static int ath10k_mac_setup_bcn_p2p_ie(struct ath10k_vif *arvif,
|
|
struct sk_buff *bcn)
|
|
{
|
|
struct ath10k *ar = arvif->ar;
|
|
struct ieee80211_mgmt *mgmt;
|
|
const u8 *p2p_ie;
|
|
int ret;
|
|
|
|
if (arvif->vif->type != NL80211_IFTYPE_AP || !arvif->vif->p2p)
|
|
return 0;
|
|
|
|
mgmt = (void *)bcn->data;
|
|
p2p_ie = cfg80211_find_vendor_ie(WLAN_OUI_WFA, WLAN_OUI_TYPE_WFA_P2P,
|
|
mgmt->u.beacon.variable,
|
|
bcn->len - (mgmt->u.beacon.variable -
|
|
bcn->data));
|
|
if (!p2p_ie)
|
|
return -ENOENT;
|
|
|
|
ret = ath10k_wmi_p2p_go_bcn_ie(ar, arvif->vdev_id, p2p_ie);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to submit p2p go bcn ie for vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_mac_remove_vendor_ie(struct sk_buff *skb, unsigned int oui,
|
|
u8 oui_type, size_t ie_offset)
|
|
{
|
|
size_t len;
|
|
const u8 *next;
|
|
const u8 *end;
|
|
u8 *ie;
|
|
|
|
if (WARN_ON(skb->len < ie_offset))
|
|
return -EINVAL;
|
|
|
|
ie = (u8 *)cfg80211_find_vendor_ie(oui, oui_type,
|
|
skb->data + ie_offset,
|
|
skb->len - ie_offset);
|
|
if (!ie)
|
|
return -ENOENT;
|
|
|
|
len = ie[1] + 2;
|
|
end = skb->data + skb->len;
|
|
next = ie + len;
|
|
|
|
if (WARN_ON(next > end))
|
|
return -EINVAL;
|
|
|
|
memmove(ie, next, end - next);
|
|
skb_trim(skb, skb->len - len);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_mac_setup_bcn_tmpl(struct ath10k_vif *arvif)
|
|
{
|
|
struct ath10k *ar = arvif->ar;
|
|
struct ieee80211_hw *hw = ar->hw;
|
|
struct ieee80211_vif *vif = arvif->vif;
|
|
struct ieee80211_mutable_offsets offs = {};
|
|
struct sk_buff *bcn;
|
|
int ret;
|
|
|
|
if (!test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map))
|
|
return 0;
|
|
|
|
if (arvif->vdev_type != WMI_VDEV_TYPE_AP &&
|
|
arvif->vdev_type != WMI_VDEV_TYPE_IBSS)
|
|
return 0;
|
|
|
|
bcn = ieee80211_beacon_get_template(hw, vif, &offs);
|
|
if (!bcn) {
|
|
ath10k_warn(ar, "failed to get beacon template from mac80211\n");
|
|
return -EPERM;
|
|
}
|
|
|
|
ret = ath10k_mac_setup_bcn_p2p_ie(arvif, bcn);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to setup p2p go bcn ie: %d\n", ret);
|
|
kfree_skb(bcn);
|
|
return ret;
|
|
}
|
|
|
|
/* P2P IE is inserted by firmware automatically (as configured above)
|
|
* so remove it from the base beacon template to avoid duplicate P2P
|
|
* IEs in beacon frames.
|
|
*/
|
|
ath10k_mac_remove_vendor_ie(bcn, WLAN_OUI_WFA, WLAN_OUI_TYPE_WFA_P2P,
|
|
offsetof(struct ieee80211_mgmt,
|
|
u.beacon.variable));
|
|
|
|
ret = ath10k_wmi_bcn_tmpl(ar, arvif->vdev_id, offs.tim_offset, bcn, 0,
|
|
0, NULL, 0);
|
|
kfree_skb(bcn);
|
|
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to submit beacon template command: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_mac_setup_prb_tmpl(struct ath10k_vif *arvif)
|
|
{
|
|
struct ath10k *ar = arvif->ar;
|
|
struct ieee80211_hw *hw = ar->hw;
|
|
struct ieee80211_vif *vif = arvif->vif;
|
|
struct sk_buff *prb;
|
|
int ret;
|
|
|
|
if (!test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map))
|
|
return 0;
|
|
|
|
if (arvif->vdev_type != WMI_VDEV_TYPE_AP)
|
|
return 0;
|
|
|
|
prb = ieee80211_proberesp_get(hw, vif);
|
|
if (!prb) {
|
|
ath10k_warn(ar, "failed to get probe resp template from mac80211\n");
|
|
return -EPERM;
|
|
}
|
|
|
|
ret = ath10k_wmi_prb_tmpl(ar, arvif->vdev_id, prb);
|
|
kfree_skb(prb);
|
|
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to submit probe resp template command: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_mac_vif_fix_hidden_ssid(struct ath10k_vif *arvif)
|
|
{
|
|
struct ath10k *ar = arvif->ar;
|
|
struct cfg80211_chan_def def;
|
|
int ret;
|
|
|
|
/* When originally vdev is started during assign_vif_chanctx() some
|
|
* information is missing, notably SSID. Firmware revisions with beacon
|
|
* offloading require the SSID to be provided during vdev (re)start to
|
|
* handle hidden SSID properly.
|
|
*
|
|
* Vdev restart must be done after vdev has been both started and
|
|
* upped. Otherwise some firmware revisions (at least 10.2) fail to
|
|
* deliver vdev restart response event causing timeouts during vdev
|
|
* syncing in ath10k.
|
|
*
|
|
* Note: The vdev down/up and template reinstallation could be skipped
|
|
* since only wmi-tlv firmware are known to have beacon offload and
|
|
* wmi-tlv doesn't seem to misbehave like 10.2 wrt vdev restart
|
|
* response delivery. It's probably more robust to keep it as is.
|
|
*/
|
|
if (!test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map))
|
|
return 0;
|
|
|
|
if (WARN_ON(!arvif->is_started))
|
|
return -EINVAL;
|
|
|
|
if (WARN_ON(!arvif->is_up))
|
|
return -EINVAL;
|
|
|
|
if (WARN_ON(ath10k_mac_vif_chan(arvif->vif, &def)))
|
|
return -EINVAL;
|
|
|
|
ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to bring down ap vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Vdev down reset beacon & presp templates. Reinstall them. Otherwise
|
|
* firmware will crash upon vdev up.
|
|
*/
|
|
|
|
ret = ath10k_mac_setup_bcn_tmpl(arvif);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to update beacon template: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = ath10k_mac_setup_prb_tmpl(arvif);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to update presp template: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = ath10k_vdev_restart(arvif, &def);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to restart ap vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = ath10k_wmi_vdev_up(arvif->ar, arvif->vdev_id, arvif->aid,
|
|
arvif->bssid);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to bring up ap vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ath10k_control_beaconing(struct ath10k_vif *arvif,
|
|
struct ieee80211_bss_conf *info)
|
|
{
|
|
struct ath10k *ar = arvif->ar;
|
|
int ret = 0;
|
|
|
|
lockdep_assert_held(&arvif->ar->conf_mutex);
|
|
|
|
if (!info->enable_beacon) {
|
|
ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to down vdev_id %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
|
|
arvif->is_up = false;
|
|
|
|
spin_lock_bh(&arvif->ar->data_lock);
|
|
ath10k_mac_vif_beacon_free(arvif);
|
|
spin_unlock_bh(&arvif->ar->data_lock);
|
|
|
|
return;
|
|
}
|
|
|
|
arvif->tx_seq_no = 0x1000;
|
|
|
|
arvif->aid = 0;
|
|
ether_addr_copy(arvif->bssid, info->bssid);
|
|
|
|
ret = ath10k_wmi_vdev_up(arvif->ar, arvif->vdev_id, arvif->aid,
|
|
arvif->bssid);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to bring up vdev %d: %i\n",
|
|
arvif->vdev_id, ret);
|
|
return;
|
|
}
|
|
|
|
arvif->is_up = true;
|
|
|
|
ret = ath10k_mac_vif_fix_hidden_ssid(arvif);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to fix hidden ssid for vdev %i, expect trouble: %d\n",
|
|
arvif->vdev_id, ret);
|
|
return;
|
|
}
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d up\n", arvif->vdev_id);
|
|
}
|
|
|
|
static void ath10k_control_ibss(struct ath10k_vif *arvif,
|
|
struct ieee80211_bss_conf *info,
|
|
const u8 self_peer[ETH_ALEN])
|
|
{
|
|
struct ath10k *ar = arvif->ar;
|
|
u32 vdev_param;
|
|
int ret = 0;
|
|
|
|
lockdep_assert_held(&arvif->ar->conf_mutex);
|
|
|
|
if (!info->ibss_joined) {
|
|
if (is_zero_ether_addr(arvif->bssid))
|
|
return;
|
|
|
|
eth_zero_addr(arvif->bssid);
|
|
|
|
return;
|
|
}
|
|
|
|
vdev_param = arvif->ar->wmi.vdev_param->atim_window;
|
|
ret = ath10k_wmi_vdev_set_param(arvif->ar, arvif->vdev_id, vdev_param,
|
|
ATH10K_DEFAULT_ATIM);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to set IBSS ATIM for vdev %d: %d\n",
|
|
arvif->vdev_id, ret);
|
|
}
|
|
|
|
static int ath10k_mac_vif_recalc_ps_wake_threshold(struct ath10k_vif *arvif)
|
|
{
|
|
struct ath10k *ar = arvif->ar;
|
|
u32 param;
|
|
u32 value;
|
|
int ret;
|
|
|
|
lockdep_assert_held(&arvif->ar->conf_mutex);
|
|
|
|
if (arvif->u.sta.uapsd)
|
|
value = WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER;
|
|
else
|
|
value = WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS;
|
|
|
|
param = WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD;
|
|
ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, param, value);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to submit ps wake threshold %u on vdev %i: %d\n",
|
|
value, arvif->vdev_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_mac_vif_recalc_ps_poll_count(struct ath10k_vif *arvif)
|
|
{
|
|
struct ath10k *ar = arvif->ar;
|
|
u32 param;
|
|
u32 value;
|
|
int ret;
|
|
|
|
lockdep_assert_held(&arvif->ar->conf_mutex);
|
|
|
|
if (arvif->u.sta.uapsd)
|
|
value = WMI_STA_PS_PSPOLL_COUNT_UAPSD;
|
|
else
|
|
value = WMI_STA_PS_PSPOLL_COUNT_NO_MAX;
|
|
|
|
param = WMI_STA_PS_PARAM_PSPOLL_COUNT;
|
|
ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
|
|
param, value);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to submit ps poll count %u on vdev %i: %d\n",
|
|
value, arvif->vdev_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_mac_num_vifs_started(struct ath10k *ar)
|
|
{
|
|
struct ath10k_vif *arvif;
|
|
int num = 0;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
list_for_each_entry(arvif, &ar->arvifs, list)
|
|
if (arvif->is_started)
|
|
num++;
|
|
|
|
return num;
|
|
}
|
|
|
|
static int ath10k_mac_vif_setup_ps(struct ath10k_vif *arvif)
|
|
{
|
|
struct ath10k *ar = arvif->ar;
|
|
struct ieee80211_vif *vif = arvif->vif;
|
|
struct ieee80211_conf *conf = &ar->hw->conf;
|
|
enum wmi_sta_powersave_param param;
|
|
enum wmi_sta_ps_mode psmode;
|
|
int ret;
|
|
int ps_timeout;
|
|
bool enable_ps;
|
|
|
|
lockdep_assert_held(&arvif->ar->conf_mutex);
|
|
|
|
if (arvif->vif->type != NL80211_IFTYPE_STATION)
|
|
return 0;
|
|
|
|
enable_ps = arvif->ps;
|
|
|
|
if (enable_ps && ath10k_mac_num_vifs_started(ar) > 1 &&
|
|
!test_bit(ATH10K_FW_FEATURE_MULTI_VIF_PS_SUPPORT,
|
|
ar->running_fw->fw_file.fw_features)) {
|
|
ath10k_warn(ar, "refusing to enable ps on vdev %i: not supported by fw\n",
|
|
arvif->vdev_id);
|
|
enable_ps = false;
|
|
}
|
|
|
|
if (!arvif->is_started) {
|
|
/* mac80211 can update vif powersave state while disconnected.
|
|
* Firmware doesn't behave nicely and consumes more power than
|
|
* necessary if PS is disabled on a non-started vdev. Hence
|
|
* force-enable PS for non-running vdevs.
|
|
*/
|
|
psmode = WMI_STA_PS_MODE_ENABLED;
|
|
} else if (enable_ps) {
|
|
psmode = WMI_STA_PS_MODE_ENABLED;
|
|
param = WMI_STA_PS_PARAM_INACTIVITY_TIME;
|
|
|
|
ps_timeout = conf->dynamic_ps_timeout;
|
|
if (ps_timeout == 0) {
|
|
/* Firmware doesn't like 0 */
|
|
ps_timeout = ieee80211_tu_to_usec(
|
|
vif->bss_conf.beacon_int) / 1000;
|
|
}
|
|
|
|
ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, param,
|
|
ps_timeout);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to set inactivity time for vdev %d: %i\n",
|
|
arvif->vdev_id, ret);
|
|
return ret;
|
|
}
|
|
} else {
|
|
psmode = WMI_STA_PS_MODE_DISABLED;
|
|
}
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d psmode %s\n",
|
|
arvif->vdev_id, psmode ? "enable" : "disable");
|
|
|
|
ret = ath10k_wmi_set_psmode(ar, arvif->vdev_id, psmode);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to set PS Mode %d for vdev %d: %d\n",
|
|
psmode, arvif->vdev_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_mac_vif_disable_keepalive(struct ath10k_vif *arvif)
|
|
{
|
|
struct ath10k *ar = arvif->ar;
|
|
struct wmi_sta_keepalive_arg arg = {};
|
|
int ret;
|
|
|
|
lockdep_assert_held(&arvif->ar->conf_mutex);
|
|
|
|
if (arvif->vdev_type != WMI_VDEV_TYPE_STA)
|
|
return 0;
|
|
|
|
if (!test_bit(WMI_SERVICE_STA_KEEP_ALIVE, ar->wmi.svc_map))
|
|
return 0;
|
|
|
|
/* Some firmware revisions have a bug and ignore the `enabled` field.
|
|
* Instead use the interval to disable the keepalive.
|
|
*/
|
|
arg.vdev_id = arvif->vdev_id;
|
|
arg.enabled = 1;
|
|
arg.method = WMI_STA_KEEPALIVE_METHOD_NULL_FRAME;
|
|
arg.interval = WMI_STA_KEEPALIVE_INTERVAL_DISABLE;
|
|
|
|
ret = ath10k_wmi_sta_keepalive(ar, &arg);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to submit keepalive on vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ath10k_mac_vif_ap_csa_count_down(struct ath10k_vif *arvif)
|
|
{
|
|
struct ath10k *ar = arvif->ar;
|
|
struct ieee80211_vif *vif = arvif->vif;
|
|
int ret;
|
|
|
|
lockdep_assert_held(&arvif->ar->conf_mutex);
|
|
|
|
if (WARN_ON(!test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map)))
|
|
return;
|
|
|
|
if (arvif->vdev_type != WMI_VDEV_TYPE_AP)
|
|
return;
|
|
|
|
if (!vif->csa_active)
|
|
return;
|
|
|
|
if (!arvif->is_up)
|
|
return;
|
|
|
|
if (!ieee80211_csa_is_complete(vif)) {
|
|
ieee80211_csa_update_counter(vif);
|
|
|
|
ret = ath10k_mac_setup_bcn_tmpl(arvif);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to update bcn tmpl during csa: %d\n",
|
|
ret);
|
|
|
|
ret = ath10k_mac_setup_prb_tmpl(arvif);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to update prb tmpl during csa: %d\n",
|
|
ret);
|
|
} else {
|
|
ieee80211_csa_finish(vif);
|
|
}
|
|
}
|
|
|
|
static void ath10k_mac_vif_ap_csa_work(struct work_struct *work)
|
|
{
|
|
struct ath10k_vif *arvif = container_of(work, struct ath10k_vif,
|
|
ap_csa_work);
|
|
struct ath10k *ar = arvif->ar;
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
ath10k_mac_vif_ap_csa_count_down(arvif);
|
|
mutex_unlock(&ar->conf_mutex);
|
|
}
|
|
|
|
static void ath10k_mac_handle_beacon_iter(void *data, u8 *mac,
|
|
struct ieee80211_vif *vif)
|
|
{
|
|
struct sk_buff *skb = data;
|
|
struct ieee80211_mgmt *mgmt = (void *)skb->data;
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
|
|
if (vif->type != NL80211_IFTYPE_STATION)
|
|
return;
|
|
|
|
if (!ether_addr_equal(mgmt->bssid, vif->bss_conf.bssid))
|
|
return;
|
|
|
|
cancel_delayed_work(&arvif->connection_loss_work);
|
|
}
|
|
|
|
void ath10k_mac_handle_beacon(struct ath10k *ar, struct sk_buff *skb)
|
|
{
|
|
ieee80211_iterate_active_interfaces_atomic(ar->hw,
|
|
IEEE80211_IFACE_ITER_NORMAL,
|
|
ath10k_mac_handle_beacon_iter,
|
|
skb);
|
|
}
|
|
|
|
static void ath10k_mac_handle_beacon_miss_iter(void *data, u8 *mac,
|
|
struct ieee80211_vif *vif)
|
|
{
|
|
u32 *vdev_id = data;
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
struct ath10k *ar = arvif->ar;
|
|
struct ieee80211_hw *hw = ar->hw;
|
|
|
|
if (arvif->vdev_id != *vdev_id)
|
|
return;
|
|
|
|
if (!arvif->is_up)
|
|
return;
|
|
|
|
ieee80211_beacon_loss(vif);
|
|
|
|
/* Firmware doesn't report beacon loss events repeatedly. If AP probe
|
|
* (done by mac80211) succeeds but beacons do not resume then it
|
|
* doesn't make sense to continue operation. Queue connection loss work
|
|
* which can be cancelled when beacon is received.
|
|
*/
|
|
ieee80211_queue_delayed_work(hw, &arvif->connection_loss_work,
|
|
ATH10K_CONNECTION_LOSS_HZ);
|
|
}
|
|
|
|
void ath10k_mac_handle_beacon_miss(struct ath10k *ar, u32 vdev_id)
|
|
{
|
|
ieee80211_iterate_active_interfaces_atomic(ar->hw,
|
|
IEEE80211_IFACE_ITER_NORMAL,
|
|
ath10k_mac_handle_beacon_miss_iter,
|
|
&vdev_id);
|
|
}
|
|
|
|
static void ath10k_mac_vif_sta_connection_loss_work(struct work_struct *work)
|
|
{
|
|
struct ath10k_vif *arvif = container_of(work, struct ath10k_vif,
|
|
connection_loss_work.work);
|
|
struct ieee80211_vif *vif = arvif->vif;
|
|
|
|
if (!arvif->is_up)
|
|
return;
|
|
|
|
ieee80211_connection_loss(vif);
|
|
}
|
|
|
|
/**********************/
|
|
/* Station management */
|
|
/**********************/
|
|
|
|
static u32 ath10k_peer_assoc_h_listen_intval(struct ath10k *ar,
|
|
struct ieee80211_vif *vif)
|
|
{
|
|
/* Some firmware revisions have unstable STA powersave when listen
|
|
* interval is set too high (e.g. 5). The symptoms are firmware doesn't
|
|
* generate NullFunc frames properly even if buffered frames have been
|
|
* indicated in Beacon TIM. Firmware would seldom wake up to pull
|
|
* buffered frames. Often pinging the device from AP would simply fail.
|
|
*
|
|
* As a workaround set it to 1.
|
|
*/
|
|
if (vif->type == NL80211_IFTYPE_STATION)
|
|
return 1;
|
|
|
|
return ar->hw->conf.listen_interval;
|
|
}
|
|
|
|
static void ath10k_peer_assoc_h_basic(struct ath10k *ar,
|
|
struct ieee80211_vif *vif,
|
|
struct ieee80211_sta *sta,
|
|
struct wmi_peer_assoc_complete_arg *arg)
|
|
{
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
u32 aid;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
if (vif->type == NL80211_IFTYPE_STATION)
|
|
aid = vif->bss_conf.aid;
|
|
else
|
|
aid = sta->aid;
|
|
|
|
ether_addr_copy(arg->addr, sta->addr);
|
|
arg->vdev_id = arvif->vdev_id;
|
|
arg->peer_aid = aid;
|
|
arg->peer_flags |= arvif->ar->wmi.peer_flags->auth;
|
|
arg->peer_listen_intval = ath10k_peer_assoc_h_listen_intval(ar, vif);
|
|
arg->peer_num_spatial_streams = 1;
|
|
arg->peer_caps = vif->bss_conf.assoc_capability;
|
|
}
|
|
|
|
static void ath10k_peer_assoc_h_crypto(struct ath10k *ar,
|
|
struct ieee80211_vif *vif,
|
|
struct ieee80211_sta *sta,
|
|
struct wmi_peer_assoc_complete_arg *arg)
|
|
{
|
|
struct ieee80211_bss_conf *info = &vif->bss_conf;
|
|
struct cfg80211_chan_def def;
|
|
struct cfg80211_bss *bss;
|
|
const u8 *rsnie = NULL;
|
|
const u8 *wpaie = NULL;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
if (WARN_ON(ath10k_mac_vif_chan(vif, &def)))
|
|
return;
|
|
|
|
bss = cfg80211_get_bss(ar->hw->wiphy, def.chan, info->bssid, NULL, 0,
|
|
IEEE80211_BSS_TYPE_ANY, IEEE80211_PRIVACY_ANY);
|
|
if (bss) {
|
|
const struct cfg80211_bss_ies *ies;
|
|
|
|
rcu_read_lock();
|
|
rsnie = ieee80211_bss_get_ie(bss, WLAN_EID_RSN);
|
|
|
|
ies = rcu_dereference(bss->ies);
|
|
|
|
wpaie = cfg80211_find_vendor_ie(WLAN_OUI_MICROSOFT,
|
|
WLAN_OUI_TYPE_MICROSOFT_WPA,
|
|
ies->data,
|
|
ies->len);
|
|
rcu_read_unlock();
|
|
cfg80211_put_bss(ar->hw->wiphy, bss);
|
|
}
|
|
|
|
/* FIXME: base on RSN IE/WPA IE is a correct idea? */
|
|
if (rsnie || wpaie) {
|
|
ath10k_dbg(ar, ATH10K_DBG_WMI, "%s: rsn ie found\n", __func__);
|
|
arg->peer_flags |= ar->wmi.peer_flags->need_ptk_4_way;
|
|
}
|
|
|
|
if (wpaie) {
|
|
ath10k_dbg(ar, ATH10K_DBG_WMI, "%s: wpa ie found\n", __func__);
|
|
arg->peer_flags |= ar->wmi.peer_flags->need_gtk_2_way;
|
|
}
|
|
|
|
if (sta->mfp &&
|
|
test_bit(ATH10K_FW_FEATURE_MFP_SUPPORT,
|
|
ar->running_fw->fw_file.fw_features)) {
|
|
arg->peer_flags |= ar->wmi.peer_flags->pmf;
|
|
}
|
|
}
|
|
|
|
static void ath10k_peer_assoc_h_rates(struct ath10k *ar,
|
|
struct ieee80211_vif *vif,
|
|
struct ieee80211_sta *sta,
|
|
struct wmi_peer_assoc_complete_arg *arg)
|
|
{
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
struct wmi_rate_set_arg *rateset = &arg->peer_legacy_rates;
|
|
struct cfg80211_chan_def def;
|
|
const struct ieee80211_supported_band *sband;
|
|
const struct ieee80211_rate *rates;
|
|
enum nl80211_band band;
|
|
u32 ratemask;
|
|
u8 rate;
|
|
int i;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
if (WARN_ON(ath10k_mac_vif_chan(vif, &def)))
|
|
return;
|
|
|
|
band = def.chan->band;
|
|
sband = ar->hw->wiphy->bands[band];
|
|
ratemask = sta->supp_rates[band];
|
|
ratemask &= arvif->bitrate_mask.control[band].legacy;
|
|
rates = sband->bitrates;
|
|
|
|
rateset->num_rates = 0;
|
|
|
|
for (i = 0; i < 32; i++, ratemask >>= 1, rates++) {
|
|
if (!(ratemask & 1))
|
|
continue;
|
|
|
|
rate = ath10k_mac_bitrate_to_rate(rates->bitrate);
|
|
rateset->rates[rateset->num_rates] = rate;
|
|
rateset->num_rates++;
|
|
}
|
|
}
|
|
|
|
static bool
|
|
ath10k_peer_assoc_h_ht_masked(const u8 ht_mcs_mask[IEEE80211_HT_MCS_MASK_LEN])
|
|
{
|
|
int nss;
|
|
|
|
for (nss = 0; nss < IEEE80211_HT_MCS_MASK_LEN; nss++)
|
|
if (ht_mcs_mask[nss])
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
static bool
|
|
ath10k_peer_assoc_h_vht_masked(const u16 vht_mcs_mask[NL80211_VHT_NSS_MAX])
|
|
{
|
|
int nss;
|
|
|
|
for (nss = 0; nss < NL80211_VHT_NSS_MAX; nss++)
|
|
if (vht_mcs_mask[nss])
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
static void ath10k_peer_assoc_h_ht(struct ath10k *ar,
|
|
struct ieee80211_vif *vif,
|
|
struct ieee80211_sta *sta,
|
|
struct wmi_peer_assoc_complete_arg *arg)
|
|
{
|
|
const struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
struct cfg80211_chan_def def;
|
|
enum nl80211_band band;
|
|
const u8 *ht_mcs_mask;
|
|
const u16 *vht_mcs_mask;
|
|
int i, n;
|
|
u8 max_nss;
|
|
u32 stbc;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
if (WARN_ON(ath10k_mac_vif_chan(vif, &def)))
|
|
return;
|
|
|
|
if (!ht_cap->ht_supported)
|
|
return;
|
|
|
|
band = def.chan->band;
|
|
ht_mcs_mask = arvif->bitrate_mask.control[band].ht_mcs;
|
|
vht_mcs_mask = arvif->bitrate_mask.control[band].vht_mcs;
|
|
|
|
if (ath10k_peer_assoc_h_ht_masked(ht_mcs_mask) &&
|
|
ath10k_peer_assoc_h_vht_masked(vht_mcs_mask))
|
|
return;
|
|
|
|
arg->peer_flags |= ar->wmi.peer_flags->ht;
|
|
arg->peer_max_mpdu = (1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
|
|
ht_cap->ampdu_factor)) - 1;
|
|
|
|
arg->peer_mpdu_density =
|
|
ath10k_parse_mpdudensity(ht_cap->ampdu_density);
|
|
|
|
arg->peer_ht_caps = ht_cap->cap;
|
|
arg->peer_rate_caps |= WMI_RC_HT_FLAG;
|
|
|
|
if (ht_cap->cap & IEEE80211_HT_CAP_LDPC_CODING)
|
|
arg->peer_flags |= ar->wmi.peer_flags->ldbc;
|
|
|
|
if (sta->bandwidth >= IEEE80211_STA_RX_BW_40) {
|
|
arg->peer_flags |= ar->wmi.peer_flags->bw40;
|
|
arg->peer_rate_caps |= WMI_RC_CW40_FLAG;
|
|
}
|
|
|
|
if (arvif->bitrate_mask.control[band].gi != NL80211_TXRATE_FORCE_LGI) {
|
|
if (ht_cap->cap & IEEE80211_HT_CAP_SGI_20)
|
|
arg->peer_rate_caps |= WMI_RC_SGI_FLAG;
|
|
|
|
if (ht_cap->cap & IEEE80211_HT_CAP_SGI_40)
|
|
arg->peer_rate_caps |= WMI_RC_SGI_FLAG;
|
|
}
|
|
|
|
if (ht_cap->cap & IEEE80211_HT_CAP_TX_STBC) {
|
|
arg->peer_rate_caps |= WMI_RC_TX_STBC_FLAG;
|
|
arg->peer_flags |= ar->wmi.peer_flags->stbc;
|
|
}
|
|
|
|
if (ht_cap->cap & IEEE80211_HT_CAP_RX_STBC) {
|
|
stbc = ht_cap->cap & IEEE80211_HT_CAP_RX_STBC;
|
|
stbc = stbc >> IEEE80211_HT_CAP_RX_STBC_SHIFT;
|
|
stbc = stbc << WMI_RC_RX_STBC_FLAG_S;
|
|
arg->peer_rate_caps |= stbc;
|
|
arg->peer_flags |= ar->wmi.peer_flags->stbc;
|
|
}
|
|
|
|
if (ht_cap->mcs.rx_mask[1] && ht_cap->mcs.rx_mask[2])
|
|
arg->peer_rate_caps |= WMI_RC_TS_FLAG;
|
|
else if (ht_cap->mcs.rx_mask[1])
|
|
arg->peer_rate_caps |= WMI_RC_DS_FLAG;
|
|
|
|
for (i = 0, n = 0, max_nss = 0; i < IEEE80211_HT_MCS_MASK_LEN * 8; i++)
|
|
if ((ht_cap->mcs.rx_mask[i / 8] & BIT(i % 8)) &&
|
|
(ht_mcs_mask[i / 8] & BIT(i % 8))) {
|
|
max_nss = (i / 8) + 1;
|
|
arg->peer_ht_rates.rates[n++] = i;
|
|
}
|
|
|
|
/*
|
|
* This is a workaround for HT-enabled STAs which break the spec
|
|
* and have no HT capabilities RX mask (no HT RX MCS map).
|
|
*
|
|
* As per spec, in section 20.3.5 Modulation and coding scheme (MCS),
|
|
* MCS 0 through 7 are mandatory in 20MHz with 800 ns GI at all STAs.
|
|
*
|
|
* Firmware asserts if such situation occurs.
|
|
*/
|
|
if (n == 0) {
|
|
arg->peer_ht_rates.num_rates = 8;
|
|
for (i = 0; i < arg->peer_ht_rates.num_rates; i++)
|
|
arg->peer_ht_rates.rates[i] = i;
|
|
} else {
|
|
arg->peer_ht_rates.num_rates = n;
|
|
arg->peer_num_spatial_streams = min(sta->rx_nss, max_nss);
|
|
}
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac ht peer %pM mcs cnt %d nss %d\n",
|
|
arg->addr,
|
|
arg->peer_ht_rates.num_rates,
|
|
arg->peer_num_spatial_streams);
|
|
}
|
|
|
|
static int ath10k_peer_assoc_qos_ap(struct ath10k *ar,
|
|
struct ath10k_vif *arvif,
|
|
struct ieee80211_sta *sta)
|
|
{
|
|
u32 uapsd = 0;
|
|
u32 max_sp = 0;
|
|
int ret = 0;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
if (sta->wme && sta->uapsd_queues) {
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac uapsd_queues 0x%x max_sp %d\n",
|
|
sta->uapsd_queues, sta->max_sp);
|
|
|
|
if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
|
|
uapsd |= WMI_AP_PS_UAPSD_AC3_DELIVERY_EN |
|
|
WMI_AP_PS_UAPSD_AC3_TRIGGER_EN;
|
|
if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI)
|
|
uapsd |= WMI_AP_PS_UAPSD_AC2_DELIVERY_EN |
|
|
WMI_AP_PS_UAPSD_AC2_TRIGGER_EN;
|
|
if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK)
|
|
uapsd |= WMI_AP_PS_UAPSD_AC1_DELIVERY_EN |
|
|
WMI_AP_PS_UAPSD_AC1_TRIGGER_EN;
|
|
if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE)
|
|
uapsd |= WMI_AP_PS_UAPSD_AC0_DELIVERY_EN |
|
|
WMI_AP_PS_UAPSD_AC0_TRIGGER_EN;
|
|
|
|
if (sta->max_sp < MAX_WMI_AP_PS_PEER_PARAM_MAX_SP)
|
|
max_sp = sta->max_sp;
|
|
|
|
ret = ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id,
|
|
sta->addr,
|
|
WMI_AP_PS_PEER_PARAM_UAPSD,
|
|
uapsd);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to set ap ps peer param uapsd for vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id,
|
|
sta->addr,
|
|
WMI_AP_PS_PEER_PARAM_MAX_SP,
|
|
max_sp);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to set ap ps peer param max sp for vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
/* TODO setup this based on STA listen interval and
|
|
* beacon interval. Currently we don't know
|
|
* sta->listen_interval - mac80211 patch required.
|
|
* Currently use 10 seconds
|
|
*/
|
|
ret = ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id, sta->addr,
|
|
WMI_AP_PS_PEER_PARAM_AGEOUT_TIME,
|
|
10);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to set ap ps peer param ageout time for vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u16
|
|
ath10k_peer_assoc_h_vht_limit(u16 tx_mcs_set,
|
|
const u16 vht_mcs_limit[NL80211_VHT_NSS_MAX])
|
|
{
|
|
int idx_limit;
|
|
int nss;
|
|
u16 mcs_map;
|
|
u16 mcs;
|
|
|
|
for (nss = 0; nss < NL80211_VHT_NSS_MAX; nss++) {
|
|
mcs_map = ath10k_mac_get_max_vht_mcs_map(tx_mcs_set, nss) &
|
|
vht_mcs_limit[nss];
|
|
|
|
if (mcs_map)
|
|
idx_limit = fls(mcs_map) - 1;
|
|
else
|
|
idx_limit = -1;
|
|
|
|
switch (idx_limit) {
|
|
case 0: /* fall through */
|
|
case 1: /* fall through */
|
|
case 2: /* fall through */
|
|
case 3: /* fall through */
|
|
case 4: /* fall through */
|
|
case 5: /* fall through */
|
|
case 6: /* fall through */
|
|
default:
|
|
/* see ath10k_mac_can_set_bitrate_mask() */
|
|
WARN_ON(1);
|
|
/* fall through */
|
|
case -1:
|
|
mcs = IEEE80211_VHT_MCS_NOT_SUPPORTED;
|
|
break;
|
|
case 7:
|
|
mcs = IEEE80211_VHT_MCS_SUPPORT_0_7;
|
|
break;
|
|
case 8:
|
|
mcs = IEEE80211_VHT_MCS_SUPPORT_0_8;
|
|
break;
|
|
case 9:
|
|
mcs = IEEE80211_VHT_MCS_SUPPORT_0_9;
|
|
break;
|
|
}
|
|
|
|
tx_mcs_set &= ~(0x3 << (nss * 2));
|
|
tx_mcs_set |= mcs << (nss * 2);
|
|
}
|
|
|
|
return tx_mcs_set;
|
|
}
|
|
|
|
static void ath10k_peer_assoc_h_vht(struct ath10k *ar,
|
|
struct ieee80211_vif *vif,
|
|
struct ieee80211_sta *sta,
|
|
struct wmi_peer_assoc_complete_arg *arg)
|
|
{
|
|
const struct ieee80211_sta_vht_cap *vht_cap = &sta->vht_cap;
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
struct cfg80211_chan_def def;
|
|
enum nl80211_band band;
|
|
const u16 *vht_mcs_mask;
|
|
u8 ampdu_factor;
|
|
u8 max_nss, vht_mcs;
|
|
int i;
|
|
|
|
if (WARN_ON(ath10k_mac_vif_chan(vif, &def)))
|
|
return;
|
|
|
|
if (!vht_cap->vht_supported)
|
|
return;
|
|
|
|
band = def.chan->band;
|
|
vht_mcs_mask = arvif->bitrate_mask.control[band].vht_mcs;
|
|
|
|
if (ath10k_peer_assoc_h_vht_masked(vht_mcs_mask))
|
|
return;
|
|
|
|
arg->peer_flags |= ar->wmi.peer_flags->vht;
|
|
|
|
if (def.chan->band == NL80211_BAND_2GHZ)
|
|
arg->peer_flags |= ar->wmi.peer_flags->vht_2g;
|
|
|
|
arg->peer_vht_caps = vht_cap->cap;
|
|
|
|
ampdu_factor = (vht_cap->cap &
|
|
IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK) >>
|
|
IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT;
|
|
|
|
/* Workaround: Some Netgear/Linksys 11ac APs set Rx A-MPDU factor to
|
|
* zero in VHT IE. Using it would result in degraded throughput.
|
|
* arg->peer_max_mpdu at this point contains HT max_mpdu so keep
|
|
* it if VHT max_mpdu is smaller.
|
|
*/
|
|
arg->peer_max_mpdu = max(arg->peer_max_mpdu,
|
|
(1U << (IEEE80211_HT_MAX_AMPDU_FACTOR +
|
|
ampdu_factor)) - 1);
|
|
|
|
if (sta->bandwidth == IEEE80211_STA_RX_BW_80)
|
|
arg->peer_flags |= ar->wmi.peer_flags->bw80;
|
|
|
|
if (sta->bandwidth == IEEE80211_STA_RX_BW_160)
|
|
arg->peer_flags |= ar->wmi.peer_flags->bw160;
|
|
|
|
/* Calculate peer NSS capability from VHT capabilities if STA
|
|
* supports VHT.
|
|
*/
|
|
for (i = 0, max_nss = 0, vht_mcs = 0; i < NL80211_VHT_NSS_MAX; i++) {
|
|
vht_mcs = __le16_to_cpu(vht_cap->vht_mcs.rx_mcs_map) >>
|
|
(2 * i) & 3;
|
|
|
|
if ((vht_mcs != IEEE80211_VHT_MCS_NOT_SUPPORTED) &&
|
|
vht_mcs_mask[i])
|
|
max_nss = i + 1;
|
|
}
|
|
arg->peer_num_spatial_streams = min(sta->rx_nss, max_nss);
|
|
arg->peer_vht_rates.rx_max_rate =
|
|
__le16_to_cpu(vht_cap->vht_mcs.rx_highest);
|
|
arg->peer_vht_rates.rx_mcs_set =
|
|
__le16_to_cpu(vht_cap->vht_mcs.rx_mcs_map);
|
|
arg->peer_vht_rates.tx_max_rate =
|
|
__le16_to_cpu(vht_cap->vht_mcs.tx_highest);
|
|
arg->peer_vht_rates.tx_mcs_set = ath10k_peer_assoc_h_vht_limit(
|
|
__le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map), vht_mcs_mask);
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vht peer %pM max_mpdu %d flags 0x%x\n",
|
|
sta->addr, arg->peer_max_mpdu, arg->peer_flags);
|
|
|
|
if (arg->peer_vht_rates.rx_max_rate &&
|
|
(sta->vht_cap.cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK)) {
|
|
switch (arg->peer_vht_rates.rx_max_rate) {
|
|
case 1560:
|
|
/* Must be 2x2 at 160Mhz is all it can do. */
|
|
arg->peer_bw_rxnss_override = 2;
|
|
break;
|
|
case 780:
|
|
/* Can only do 1x1 at 160Mhz (Long Guard Interval) */
|
|
arg->peer_bw_rxnss_override = 1;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void ath10k_peer_assoc_h_qos(struct ath10k *ar,
|
|
struct ieee80211_vif *vif,
|
|
struct ieee80211_sta *sta,
|
|
struct wmi_peer_assoc_complete_arg *arg)
|
|
{
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
|
|
switch (arvif->vdev_type) {
|
|
case WMI_VDEV_TYPE_AP:
|
|
if (sta->wme)
|
|
arg->peer_flags |= arvif->ar->wmi.peer_flags->qos;
|
|
|
|
if (sta->wme && sta->uapsd_queues) {
|
|
arg->peer_flags |= arvif->ar->wmi.peer_flags->apsd;
|
|
arg->peer_rate_caps |= WMI_RC_UAPSD_FLAG;
|
|
}
|
|
break;
|
|
case WMI_VDEV_TYPE_STA:
|
|
if (sta->wme)
|
|
arg->peer_flags |= arvif->ar->wmi.peer_flags->qos;
|
|
break;
|
|
case WMI_VDEV_TYPE_IBSS:
|
|
if (sta->wme)
|
|
arg->peer_flags |= arvif->ar->wmi.peer_flags->qos;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac peer %pM qos %d\n",
|
|
sta->addr, !!(arg->peer_flags &
|
|
arvif->ar->wmi.peer_flags->qos));
|
|
}
|
|
|
|
static bool ath10k_mac_sta_has_ofdm_only(struct ieee80211_sta *sta)
|
|
{
|
|
return sta->supp_rates[NL80211_BAND_2GHZ] >>
|
|
ATH10K_MAC_FIRST_OFDM_RATE_IDX;
|
|
}
|
|
|
|
static enum wmi_phy_mode ath10k_mac_get_phymode_vht(struct ath10k *ar,
|
|
struct ieee80211_sta *sta)
|
|
{
|
|
if (sta->bandwidth == IEEE80211_STA_RX_BW_160) {
|
|
switch (sta->vht_cap.cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) {
|
|
case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ:
|
|
return MODE_11AC_VHT160;
|
|
case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ:
|
|
return MODE_11AC_VHT80_80;
|
|
default:
|
|
/* not sure if this is a valid case? */
|
|
return MODE_11AC_VHT160;
|
|
}
|
|
}
|
|
|
|
if (sta->bandwidth == IEEE80211_STA_RX_BW_80)
|
|
return MODE_11AC_VHT80;
|
|
|
|
if (sta->bandwidth == IEEE80211_STA_RX_BW_40)
|
|
return MODE_11AC_VHT40;
|
|
|
|
if (sta->bandwidth == IEEE80211_STA_RX_BW_20)
|
|
return MODE_11AC_VHT20;
|
|
|
|
return MODE_UNKNOWN;
|
|
}
|
|
|
|
static void ath10k_peer_assoc_h_phymode(struct ath10k *ar,
|
|
struct ieee80211_vif *vif,
|
|
struct ieee80211_sta *sta,
|
|
struct wmi_peer_assoc_complete_arg *arg)
|
|
{
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
struct cfg80211_chan_def def;
|
|
enum nl80211_band band;
|
|
const u8 *ht_mcs_mask;
|
|
const u16 *vht_mcs_mask;
|
|
enum wmi_phy_mode phymode = MODE_UNKNOWN;
|
|
|
|
if (WARN_ON(ath10k_mac_vif_chan(vif, &def)))
|
|
return;
|
|
|
|
band = def.chan->band;
|
|
ht_mcs_mask = arvif->bitrate_mask.control[band].ht_mcs;
|
|
vht_mcs_mask = arvif->bitrate_mask.control[band].vht_mcs;
|
|
|
|
switch (band) {
|
|
case NL80211_BAND_2GHZ:
|
|
if (sta->vht_cap.vht_supported &&
|
|
!ath10k_peer_assoc_h_vht_masked(vht_mcs_mask)) {
|
|
if (sta->bandwidth == IEEE80211_STA_RX_BW_40)
|
|
phymode = MODE_11AC_VHT40;
|
|
else
|
|
phymode = MODE_11AC_VHT20;
|
|
} else if (sta->ht_cap.ht_supported &&
|
|
!ath10k_peer_assoc_h_ht_masked(ht_mcs_mask)) {
|
|
if (sta->bandwidth == IEEE80211_STA_RX_BW_40)
|
|
phymode = MODE_11NG_HT40;
|
|
else
|
|
phymode = MODE_11NG_HT20;
|
|
} else if (ath10k_mac_sta_has_ofdm_only(sta)) {
|
|
phymode = MODE_11G;
|
|
} else {
|
|
phymode = MODE_11B;
|
|
}
|
|
|
|
break;
|
|
case NL80211_BAND_5GHZ:
|
|
/*
|
|
* Check VHT first.
|
|
*/
|
|
if (sta->vht_cap.vht_supported &&
|
|
!ath10k_peer_assoc_h_vht_masked(vht_mcs_mask)) {
|
|
phymode = ath10k_mac_get_phymode_vht(ar, sta);
|
|
} else if (sta->ht_cap.ht_supported &&
|
|
!ath10k_peer_assoc_h_ht_masked(ht_mcs_mask)) {
|
|
if (sta->bandwidth >= IEEE80211_STA_RX_BW_40)
|
|
phymode = MODE_11NA_HT40;
|
|
else
|
|
phymode = MODE_11NA_HT20;
|
|
} else {
|
|
phymode = MODE_11A;
|
|
}
|
|
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac peer %pM phymode %s\n",
|
|
sta->addr, ath10k_wmi_phymode_str(phymode));
|
|
|
|
arg->peer_phymode = phymode;
|
|
WARN_ON(phymode == MODE_UNKNOWN);
|
|
}
|
|
|
|
static int ath10k_peer_assoc_prepare(struct ath10k *ar,
|
|
struct ieee80211_vif *vif,
|
|
struct ieee80211_sta *sta,
|
|
struct wmi_peer_assoc_complete_arg *arg)
|
|
{
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
memset(arg, 0, sizeof(*arg));
|
|
|
|
ath10k_peer_assoc_h_basic(ar, vif, sta, arg);
|
|
ath10k_peer_assoc_h_crypto(ar, vif, sta, arg);
|
|
ath10k_peer_assoc_h_rates(ar, vif, sta, arg);
|
|
ath10k_peer_assoc_h_ht(ar, vif, sta, arg);
|
|
ath10k_peer_assoc_h_vht(ar, vif, sta, arg);
|
|
ath10k_peer_assoc_h_qos(ar, vif, sta, arg);
|
|
ath10k_peer_assoc_h_phymode(ar, vif, sta, arg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const u32 ath10k_smps_map[] = {
|
|
[WLAN_HT_CAP_SM_PS_STATIC] = WMI_PEER_SMPS_STATIC,
|
|
[WLAN_HT_CAP_SM_PS_DYNAMIC] = WMI_PEER_SMPS_DYNAMIC,
|
|
[WLAN_HT_CAP_SM_PS_INVALID] = WMI_PEER_SMPS_PS_NONE,
|
|
[WLAN_HT_CAP_SM_PS_DISABLED] = WMI_PEER_SMPS_PS_NONE,
|
|
};
|
|
|
|
static int ath10k_setup_peer_smps(struct ath10k *ar, struct ath10k_vif *arvif,
|
|
const u8 *addr,
|
|
const struct ieee80211_sta_ht_cap *ht_cap)
|
|
{
|
|
int smps;
|
|
|
|
if (!ht_cap->ht_supported)
|
|
return 0;
|
|
|
|
smps = ht_cap->cap & IEEE80211_HT_CAP_SM_PS;
|
|
smps >>= IEEE80211_HT_CAP_SM_PS_SHIFT;
|
|
|
|
if (smps >= ARRAY_SIZE(ath10k_smps_map))
|
|
return -EINVAL;
|
|
|
|
return ath10k_wmi_peer_set_param(ar, arvif->vdev_id, addr,
|
|
WMI_PEER_SMPS_STATE,
|
|
ath10k_smps_map[smps]);
|
|
}
|
|
|
|
static int ath10k_mac_vif_recalc_txbf(struct ath10k *ar,
|
|
struct ieee80211_vif *vif,
|
|
struct ieee80211_sta_vht_cap vht_cap)
|
|
{
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
int ret;
|
|
u32 param;
|
|
u32 value;
|
|
|
|
if (ath10k_wmi_get_txbf_conf_scheme(ar) != WMI_TXBF_CONF_AFTER_ASSOC)
|
|
return 0;
|
|
|
|
if (!(ar->vht_cap_info &
|
|
(IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
|
|
IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE |
|
|
IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE |
|
|
IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)))
|
|
return 0;
|
|
|
|
param = ar->wmi.vdev_param->txbf;
|
|
value = 0;
|
|
|
|
if (WARN_ON(param == WMI_VDEV_PARAM_UNSUPPORTED))
|
|
return 0;
|
|
|
|
/* The following logic is correct. If a remote STA advertises support
|
|
* for being a beamformer then we should enable us being a beamformee.
|
|
*/
|
|
|
|
if (ar->vht_cap_info &
|
|
(IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
|
|
IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE)) {
|
|
if (vht_cap.cap & IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE)
|
|
value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFEE;
|
|
|
|
if (vht_cap.cap & IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)
|
|
value |= WMI_VDEV_PARAM_TXBF_MU_TX_BFEE;
|
|
}
|
|
|
|
if (ar->vht_cap_info &
|
|
(IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE |
|
|
IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)) {
|
|
if (vht_cap.cap & IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE)
|
|
value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFER;
|
|
|
|
if (vht_cap.cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE)
|
|
value |= WMI_VDEV_PARAM_TXBF_MU_TX_BFER;
|
|
}
|
|
|
|
if (value & WMI_VDEV_PARAM_TXBF_MU_TX_BFEE)
|
|
value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFEE;
|
|
|
|
if (value & WMI_VDEV_PARAM_TXBF_MU_TX_BFER)
|
|
value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFER;
|
|
|
|
ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, param, value);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to submit vdev param txbf 0x%x: %d\n",
|
|
value, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* can be called only in mac80211 callbacks due to `key_count` usage */
|
|
static void ath10k_bss_assoc(struct ieee80211_hw *hw,
|
|
struct ieee80211_vif *vif,
|
|
struct ieee80211_bss_conf *bss_conf)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
struct ieee80211_sta_ht_cap ht_cap;
|
|
struct ieee80211_sta_vht_cap vht_cap;
|
|
struct wmi_peer_assoc_complete_arg peer_arg;
|
|
struct ieee80211_sta *ap_sta;
|
|
int ret;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %i assoc bssid %pM aid %d\n",
|
|
arvif->vdev_id, arvif->bssid, arvif->aid);
|
|
|
|
rcu_read_lock();
|
|
|
|
ap_sta = ieee80211_find_sta(vif, bss_conf->bssid);
|
|
if (!ap_sta) {
|
|
ath10k_warn(ar, "failed to find station entry for bss %pM vdev %i\n",
|
|
bss_conf->bssid, arvif->vdev_id);
|
|
rcu_read_unlock();
|
|
return;
|
|
}
|
|
|
|
/* ap_sta must be accessed only within rcu section which must be left
|
|
* before calling ath10k_setup_peer_smps() which might sleep.
|
|
*/
|
|
ht_cap = ap_sta->ht_cap;
|
|
vht_cap = ap_sta->vht_cap;
|
|
|
|
ret = ath10k_peer_assoc_prepare(ar, vif, ap_sta, &peer_arg);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to prepare peer assoc for %pM vdev %i: %d\n",
|
|
bss_conf->bssid, arvif->vdev_id, ret);
|
|
rcu_read_unlock();
|
|
return;
|
|
}
|
|
|
|
rcu_read_unlock();
|
|
|
|
ret = ath10k_wmi_peer_assoc(ar, &peer_arg);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to run peer assoc for %pM vdev %i: %d\n",
|
|
bss_conf->bssid, arvif->vdev_id, ret);
|
|
return;
|
|
}
|
|
|
|
ret = ath10k_setup_peer_smps(ar, arvif, bss_conf->bssid, &ht_cap);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to setup peer SMPS for vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
return;
|
|
}
|
|
|
|
ret = ath10k_mac_vif_recalc_txbf(ar, vif, vht_cap);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to recalc txbf for vdev %i on bss %pM: %d\n",
|
|
arvif->vdev_id, bss_conf->bssid, ret);
|
|
return;
|
|
}
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC,
|
|
"mac vdev %d up (associated) bssid %pM aid %d\n",
|
|
arvif->vdev_id, bss_conf->bssid, bss_conf->aid);
|
|
|
|
WARN_ON(arvif->is_up);
|
|
|
|
arvif->aid = bss_conf->aid;
|
|
ether_addr_copy(arvif->bssid, bss_conf->bssid);
|
|
|
|
ret = ath10k_wmi_vdev_up(ar, arvif->vdev_id, arvif->aid, arvif->bssid);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to set vdev %d up: %d\n",
|
|
arvif->vdev_id, ret);
|
|
return;
|
|
}
|
|
|
|
arvif->is_up = true;
|
|
|
|
/* Workaround: Some firmware revisions (tested with qca6174
|
|
* WLAN.RM.2.0-00073) have buggy powersave state machine and must be
|
|
* poked with peer param command.
|
|
*/
|
|
ret = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, arvif->bssid,
|
|
WMI_PEER_DUMMY_VAR, 1);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to poke peer %pM param for ps workaround on vdev %i: %d\n",
|
|
arvif->bssid, arvif->vdev_id, ret);
|
|
return;
|
|
}
|
|
}
|
|
|
|
static void ath10k_bss_disassoc(struct ieee80211_hw *hw,
|
|
struct ieee80211_vif *vif)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
struct ieee80211_sta_vht_cap vht_cap = {};
|
|
int ret;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %i disassoc bssid %pM\n",
|
|
arvif->vdev_id, arvif->bssid);
|
|
|
|
ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to down vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
|
|
arvif->def_wep_key_idx = -1;
|
|
|
|
ret = ath10k_mac_vif_recalc_txbf(ar, vif, vht_cap);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to recalc txbf for vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
return;
|
|
}
|
|
|
|
arvif->is_up = false;
|
|
|
|
cancel_delayed_work_sync(&arvif->connection_loss_work);
|
|
}
|
|
|
|
static int ath10k_station_assoc(struct ath10k *ar,
|
|
struct ieee80211_vif *vif,
|
|
struct ieee80211_sta *sta,
|
|
bool reassoc)
|
|
{
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
struct wmi_peer_assoc_complete_arg peer_arg;
|
|
int ret = 0;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
ret = ath10k_peer_assoc_prepare(ar, vif, sta, &peer_arg);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to prepare WMI peer assoc for %pM vdev %i: %i\n",
|
|
sta->addr, arvif->vdev_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = ath10k_wmi_peer_assoc(ar, &peer_arg);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to run peer assoc for STA %pM vdev %i: %d\n",
|
|
sta->addr, arvif->vdev_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Re-assoc is run only to update supported rates for given station. It
|
|
* doesn't make much sense to reconfigure the peer completely.
|
|
*/
|
|
if (!reassoc) {
|
|
ret = ath10k_setup_peer_smps(ar, arvif, sta->addr,
|
|
&sta->ht_cap);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to setup peer SMPS for vdev %d: %d\n",
|
|
arvif->vdev_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = ath10k_peer_assoc_qos_ap(ar, arvif, sta);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to set qos params for STA %pM for vdev %i: %d\n",
|
|
sta->addr, arvif->vdev_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
if (!sta->wme) {
|
|
arvif->num_legacy_stations++;
|
|
ret = ath10k_recalc_rtscts_prot(arvif);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to recalculate rts/cts prot for vdev %d: %d\n",
|
|
arvif->vdev_id, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/* Plumb cached keys only for static WEP */
|
|
if ((arvif->def_wep_key_idx != -1) && (!sta->tdls)) {
|
|
ret = ath10k_install_peer_wep_keys(arvif, sta->addr);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to install peer wep keys for vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ath10k_station_disassoc(struct ath10k *ar,
|
|
struct ieee80211_vif *vif,
|
|
struct ieee80211_sta *sta)
|
|
{
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
int ret = 0;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
if (!sta->wme) {
|
|
arvif->num_legacy_stations--;
|
|
ret = ath10k_recalc_rtscts_prot(arvif);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to recalculate rts/cts prot for vdev %d: %d\n",
|
|
arvif->vdev_id, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
ret = ath10k_clear_peer_keys(arvif, sta->addr);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to clear all peer wep keys for vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**************/
|
|
/* Regulatory */
|
|
/**************/
|
|
|
|
static int ath10k_update_channel_list(struct ath10k *ar)
|
|
{
|
|
struct ieee80211_hw *hw = ar->hw;
|
|
struct ieee80211_supported_band **bands;
|
|
enum nl80211_band band;
|
|
struct ieee80211_channel *channel;
|
|
struct wmi_scan_chan_list_arg arg = {0};
|
|
struct wmi_channel_arg *ch;
|
|
bool passive;
|
|
int len;
|
|
int ret;
|
|
int i;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
bands = hw->wiphy->bands;
|
|
for (band = 0; band < NUM_NL80211_BANDS; band++) {
|
|
if (!bands[band])
|
|
continue;
|
|
|
|
for (i = 0; i < bands[band]->n_channels; i++) {
|
|
if (bands[band]->channels[i].flags &
|
|
IEEE80211_CHAN_DISABLED)
|
|
continue;
|
|
|
|
arg.n_channels++;
|
|
}
|
|
}
|
|
|
|
len = sizeof(struct wmi_channel_arg) * arg.n_channels;
|
|
arg.channels = kzalloc(len, GFP_KERNEL);
|
|
if (!arg.channels)
|
|
return -ENOMEM;
|
|
|
|
ch = arg.channels;
|
|
for (band = 0; band < NUM_NL80211_BANDS; band++) {
|
|
if (!bands[band])
|
|
continue;
|
|
|
|
for (i = 0; i < bands[band]->n_channels; i++) {
|
|
channel = &bands[band]->channels[i];
|
|
|
|
if (channel->flags & IEEE80211_CHAN_DISABLED)
|
|
continue;
|
|
|
|
ch->allow_ht = true;
|
|
|
|
/* FIXME: when should we really allow VHT? */
|
|
ch->allow_vht = true;
|
|
|
|
ch->allow_ibss =
|
|
!(channel->flags & IEEE80211_CHAN_NO_IR);
|
|
|
|
ch->ht40plus =
|
|
!(channel->flags & IEEE80211_CHAN_NO_HT40PLUS);
|
|
|
|
ch->chan_radar =
|
|
!!(channel->flags & IEEE80211_CHAN_RADAR);
|
|
|
|
passive = channel->flags & IEEE80211_CHAN_NO_IR;
|
|
ch->passive = passive;
|
|
|
|
ch->freq = channel->center_freq;
|
|
ch->band_center_freq1 = channel->center_freq;
|
|
ch->min_power = 0;
|
|
ch->max_power = channel->max_power * 2;
|
|
ch->max_reg_power = channel->max_reg_power * 2;
|
|
ch->max_antenna_gain = channel->max_antenna_gain * 2;
|
|
ch->reg_class_id = 0; /* FIXME */
|
|
|
|
/* FIXME: why use only legacy modes, why not any
|
|
* HT/VHT modes? Would that even make any
|
|
* difference?
|
|
*/
|
|
if (channel->band == NL80211_BAND_2GHZ)
|
|
ch->mode = MODE_11G;
|
|
else
|
|
ch->mode = MODE_11A;
|
|
|
|
if (WARN_ON_ONCE(ch->mode == MODE_UNKNOWN))
|
|
continue;
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_WMI,
|
|
"mac channel [%zd/%d] freq %d maxpower %d regpower %d antenna %d mode %d\n",
|
|
ch - arg.channels, arg.n_channels,
|
|
ch->freq, ch->max_power, ch->max_reg_power,
|
|
ch->max_antenna_gain, ch->mode);
|
|
|
|
ch++;
|
|
}
|
|
}
|
|
|
|
ret = ath10k_wmi_scan_chan_list(ar, &arg);
|
|
kfree(arg.channels);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static enum wmi_dfs_region
|
|
ath10k_mac_get_dfs_region(enum nl80211_dfs_regions dfs_region)
|
|
{
|
|
switch (dfs_region) {
|
|
case NL80211_DFS_UNSET:
|
|
return WMI_UNINIT_DFS_DOMAIN;
|
|
case NL80211_DFS_FCC:
|
|
return WMI_FCC_DFS_DOMAIN;
|
|
case NL80211_DFS_ETSI:
|
|
return WMI_ETSI_DFS_DOMAIN;
|
|
case NL80211_DFS_JP:
|
|
return WMI_MKK4_DFS_DOMAIN;
|
|
}
|
|
return WMI_UNINIT_DFS_DOMAIN;
|
|
}
|
|
|
|
static void ath10k_regd_update(struct ath10k *ar)
|
|
{
|
|
struct reg_dmn_pair_mapping *regpair;
|
|
int ret;
|
|
enum wmi_dfs_region wmi_dfs_reg;
|
|
enum nl80211_dfs_regions nl_dfs_reg;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
ret = ath10k_update_channel_list(ar);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to update channel list: %d\n", ret);
|
|
|
|
regpair = ar->ath_common.regulatory.regpair;
|
|
|
|
if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector) {
|
|
nl_dfs_reg = ar->dfs_detector->region;
|
|
wmi_dfs_reg = ath10k_mac_get_dfs_region(nl_dfs_reg);
|
|
} else {
|
|
wmi_dfs_reg = WMI_UNINIT_DFS_DOMAIN;
|
|
}
|
|
|
|
/* Target allows setting up per-band regdomain but ath_common provides
|
|
* a combined one only
|
|
*/
|
|
ret = ath10k_wmi_pdev_set_regdomain(ar,
|
|
regpair->reg_domain,
|
|
regpair->reg_domain, /* 2ghz */
|
|
regpair->reg_domain, /* 5ghz */
|
|
regpair->reg_2ghz_ctl,
|
|
regpair->reg_5ghz_ctl,
|
|
wmi_dfs_reg);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to set pdev regdomain: %d\n", ret);
|
|
}
|
|
|
|
static void ath10k_mac_update_channel_list(struct ath10k *ar,
|
|
struct ieee80211_supported_band *band)
|
|
{
|
|
int i;
|
|
|
|
if (ar->low_5ghz_chan && ar->high_5ghz_chan) {
|
|
for (i = 0; i < band->n_channels; i++) {
|
|
if (band->channels[i].center_freq < ar->low_5ghz_chan ||
|
|
band->channels[i].center_freq > ar->high_5ghz_chan)
|
|
band->channels[i].flags |=
|
|
IEEE80211_CHAN_DISABLED;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void ath10k_reg_notifier(struct wiphy *wiphy,
|
|
struct regulatory_request *request)
|
|
{
|
|
struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
|
|
struct ath10k *ar = hw->priv;
|
|
bool result;
|
|
|
|
ath_reg_notifier_apply(wiphy, request, &ar->ath_common.regulatory);
|
|
|
|
if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector) {
|
|
ath10k_dbg(ar, ATH10K_DBG_REGULATORY, "dfs region 0x%x\n",
|
|
request->dfs_region);
|
|
result = ar->dfs_detector->set_dfs_domain(ar->dfs_detector,
|
|
request->dfs_region);
|
|
if (!result)
|
|
ath10k_warn(ar, "DFS region 0x%X not supported, will trigger radar for every pulse\n",
|
|
request->dfs_region);
|
|
}
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
if (ar->state == ATH10K_STATE_ON)
|
|
ath10k_regd_update(ar);
|
|
mutex_unlock(&ar->conf_mutex);
|
|
|
|
if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY)
|
|
ath10k_mac_update_channel_list(ar,
|
|
ar->hw->wiphy->bands[NL80211_BAND_5GHZ]);
|
|
}
|
|
|
|
/***************/
|
|
/* TX handlers */
|
|
/***************/
|
|
|
|
enum ath10k_mac_tx_path {
|
|
ATH10K_MAC_TX_HTT,
|
|
ATH10K_MAC_TX_HTT_MGMT,
|
|
ATH10K_MAC_TX_WMI_MGMT,
|
|
ATH10K_MAC_TX_UNKNOWN,
|
|
};
|
|
|
|
void ath10k_mac_tx_lock(struct ath10k *ar, int reason)
|
|
{
|
|
lockdep_assert_held(&ar->htt.tx_lock);
|
|
|
|
WARN_ON(reason >= ATH10K_TX_PAUSE_MAX);
|
|
ar->tx_paused |= BIT(reason);
|
|
ieee80211_stop_queues(ar->hw);
|
|
}
|
|
|
|
static void ath10k_mac_tx_unlock_iter(void *data, u8 *mac,
|
|
struct ieee80211_vif *vif)
|
|
{
|
|
struct ath10k *ar = data;
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
|
|
if (arvif->tx_paused)
|
|
return;
|
|
|
|
ieee80211_wake_queue(ar->hw, arvif->vdev_id);
|
|
}
|
|
|
|
void ath10k_mac_tx_unlock(struct ath10k *ar, int reason)
|
|
{
|
|
lockdep_assert_held(&ar->htt.tx_lock);
|
|
|
|
WARN_ON(reason >= ATH10K_TX_PAUSE_MAX);
|
|
ar->tx_paused &= ~BIT(reason);
|
|
|
|
if (ar->tx_paused)
|
|
return;
|
|
|
|
ieee80211_iterate_active_interfaces_atomic(ar->hw,
|
|
IEEE80211_IFACE_ITER_RESUME_ALL,
|
|
ath10k_mac_tx_unlock_iter,
|
|
ar);
|
|
|
|
ieee80211_wake_queue(ar->hw, ar->hw->offchannel_tx_hw_queue);
|
|
}
|
|
|
|
void ath10k_mac_vif_tx_lock(struct ath10k_vif *arvif, int reason)
|
|
{
|
|
struct ath10k *ar = arvif->ar;
|
|
|
|
lockdep_assert_held(&ar->htt.tx_lock);
|
|
|
|
WARN_ON(reason >= BITS_PER_LONG);
|
|
arvif->tx_paused |= BIT(reason);
|
|
ieee80211_stop_queue(ar->hw, arvif->vdev_id);
|
|
}
|
|
|
|
void ath10k_mac_vif_tx_unlock(struct ath10k_vif *arvif, int reason)
|
|
{
|
|
struct ath10k *ar = arvif->ar;
|
|
|
|
lockdep_assert_held(&ar->htt.tx_lock);
|
|
|
|
WARN_ON(reason >= BITS_PER_LONG);
|
|
arvif->tx_paused &= ~BIT(reason);
|
|
|
|
if (ar->tx_paused)
|
|
return;
|
|
|
|
if (arvif->tx_paused)
|
|
return;
|
|
|
|
ieee80211_wake_queue(ar->hw, arvif->vdev_id);
|
|
}
|
|
|
|
static void ath10k_mac_vif_handle_tx_pause(struct ath10k_vif *arvif,
|
|
enum wmi_tlv_tx_pause_id pause_id,
|
|
enum wmi_tlv_tx_pause_action action)
|
|
{
|
|
struct ath10k *ar = arvif->ar;
|
|
|
|
lockdep_assert_held(&ar->htt.tx_lock);
|
|
|
|
switch (action) {
|
|
case WMI_TLV_TX_PAUSE_ACTION_STOP:
|
|
ath10k_mac_vif_tx_lock(arvif, pause_id);
|
|
break;
|
|
case WMI_TLV_TX_PAUSE_ACTION_WAKE:
|
|
ath10k_mac_vif_tx_unlock(arvif, pause_id);
|
|
break;
|
|
default:
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT,
|
|
"received unknown tx pause action %d on vdev %i, ignoring\n",
|
|
action, arvif->vdev_id);
|
|
break;
|
|
}
|
|
}
|
|
|
|
struct ath10k_mac_tx_pause {
|
|
u32 vdev_id;
|
|
enum wmi_tlv_tx_pause_id pause_id;
|
|
enum wmi_tlv_tx_pause_action action;
|
|
};
|
|
|
|
static void ath10k_mac_handle_tx_pause_iter(void *data, u8 *mac,
|
|
struct ieee80211_vif *vif)
|
|
{
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
struct ath10k_mac_tx_pause *arg = data;
|
|
|
|
if (arvif->vdev_id != arg->vdev_id)
|
|
return;
|
|
|
|
ath10k_mac_vif_handle_tx_pause(arvif, arg->pause_id, arg->action);
|
|
}
|
|
|
|
void ath10k_mac_handle_tx_pause_vdev(struct ath10k *ar, u32 vdev_id,
|
|
enum wmi_tlv_tx_pause_id pause_id,
|
|
enum wmi_tlv_tx_pause_action action)
|
|
{
|
|
struct ath10k_mac_tx_pause arg = {
|
|
.vdev_id = vdev_id,
|
|
.pause_id = pause_id,
|
|
.action = action,
|
|
};
|
|
|
|
spin_lock_bh(&ar->htt.tx_lock);
|
|
ieee80211_iterate_active_interfaces_atomic(ar->hw,
|
|
IEEE80211_IFACE_ITER_RESUME_ALL,
|
|
ath10k_mac_handle_tx_pause_iter,
|
|
&arg);
|
|
spin_unlock_bh(&ar->htt.tx_lock);
|
|
}
|
|
|
|
static enum ath10k_hw_txrx_mode
|
|
ath10k_mac_tx_h_get_txmode(struct ath10k *ar,
|
|
struct ieee80211_vif *vif,
|
|
struct ieee80211_sta *sta,
|
|
struct sk_buff *skb)
|
|
{
|
|
const struct ieee80211_hdr *hdr = (void *)skb->data;
|
|
__le16 fc = hdr->frame_control;
|
|
|
|
if (!vif || vif->type == NL80211_IFTYPE_MONITOR)
|
|
return ATH10K_HW_TXRX_RAW;
|
|
|
|
if (ieee80211_is_mgmt(fc))
|
|
return ATH10K_HW_TXRX_MGMT;
|
|
|
|
/* Workaround:
|
|
*
|
|
* NullFunc frames are mostly used to ping if a client or AP are still
|
|
* reachable and responsive. This implies tx status reports must be
|
|
* accurate - otherwise either mac80211 or userspace (e.g. hostapd) can
|
|
* come to a conclusion that the other end disappeared and tear down
|
|
* BSS connection or it can never disconnect from BSS/client (which is
|
|
* the case).
|
|
*
|
|
* Firmware with HTT older than 3.0 delivers incorrect tx status for
|
|
* NullFunc frames to driver. However there's a HTT Mgmt Tx command
|
|
* which seems to deliver correct tx reports for NullFunc frames. The
|
|
* downside of using it is it ignores client powersave state so it can
|
|
* end up disconnecting sleeping clients in AP mode. It should fix STA
|
|
* mode though because AP don't sleep.
|
|
*/
|
|
if (ar->htt.target_version_major < 3 &&
|
|
(ieee80211_is_nullfunc(fc) || ieee80211_is_qos_nullfunc(fc)) &&
|
|
!test_bit(ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX,
|
|
ar->running_fw->fw_file.fw_features))
|
|
return ATH10K_HW_TXRX_MGMT;
|
|
|
|
/* Workaround:
|
|
*
|
|
* Some wmi-tlv firmwares for qca6174 have broken Tx key selection for
|
|
* NativeWifi txmode - it selects AP key instead of peer key. It seems
|
|
* to work with Ethernet txmode so use it.
|
|
*
|
|
* FIXME: Check if raw mode works with TDLS.
|
|
*/
|
|
if (ieee80211_is_data_present(fc) && sta && sta->tdls)
|
|
return ATH10K_HW_TXRX_ETHERNET;
|
|
|
|
if (test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags))
|
|
return ATH10K_HW_TXRX_RAW;
|
|
|
|
return ATH10K_HW_TXRX_NATIVE_WIFI;
|
|
}
|
|
|
|
static bool ath10k_tx_h_use_hwcrypto(struct ieee80211_vif *vif,
|
|
struct sk_buff *skb)
|
|
{
|
|
const struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
|
|
const struct ieee80211_hdr *hdr = (void *)skb->data;
|
|
const u32 mask = IEEE80211_TX_INTFL_DONT_ENCRYPT |
|
|
IEEE80211_TX_CTL_INJECTED;
|
|
|
|
if (!ieee80211_has_protected(hdr->frame_control))
|
|
return false;
|
|
|
|
if ((info->flags & mask) == mask)
|
|
return false;
|
|
|
|
if (vif)
|
|
return !((struct ath10k_vif *)vif->drv_priv)->nohwcrypt;
|
|
|
|
return true;
|
|
}
|
|
|
|
/* HTT Tx uses Native Wifi tx mode which expects 802.11 frames without QoS
|
|
* Control in the header.
|
|
*/
|
|
static void ath10k_tx_h_nwifi(struct ieee80211_hw *hw, struct sk_buff *skb)
|
|
{
|
|
struct ieee80211_hdr *hdr = (void *)skb->data;
|
|
struct ath10k_skb_cb *cb = ATH10K_SKB_CB(skb);
|
|
u8 *qos_ctl;
|
|
|
|
if (!ieee80211_is_data_qos(hdr->frame_control))
|
|
return;
|
|
|
|
qos_ctl = ieee80211_get_qos_ctl(hdr);
|
|
memmove(skb->data + IEEE80211_QOS_CTL_LEN,
|
|
skb->data, (void *)qos_ctl - (void *)skb->data);
|
|
skb_pull(skb, IEEE80211_QOS_CTL_LEN);
|
|
|
|
/* Some firmware revisions don't handle sending QoS NullFunc well.
|
|
* These frames are mainly used for CQM purposes so it doesn't really
|
|
* matter whether QoS NullFunc or NullFunc are sent.
|
|
*/
|
|
hdr = (void *)skb->data;
|
|
if (ieee80211_is_qos_nullfunc(hdr->frame_control))
|
|
cb->flags &= ~ATH10K_SKB_F_QOS;
|
|
|
|
hdr->frame_control &= ~__cpu_to_le16(IEEE80211_STYPE_QOS_DATA);
|
|
}
|
|
|
|
static void ath10k_tx_h_8023(struct sk_buff *skb)
|
|
{
|
|
struct ieee80211_hdr *hdr;
|
|
struct rfc1042_hdr *rfc1042;
|
|
struct ethhdr *eth;
|
|
size_t hdrlen;
|
|
u8 da[ETH_ALEN];
|
|
u8 sa[ETH_ALEN];
|
|
__be16 type;
|
|
|
|
hdr = (void *)skb->data;
|
|
hdrlen = ieee80211_hdrlen(hdr->frame_control);
|
|
rfc1042 = (void *)skb->data + hdrlen;
|
|
|
|
ether_addr_copy(da, ieee80211_get_DA(hdr));
|
|
ether_addr_copy(sa, ieee80211_get_SA(hdr));
|
|
type = rfc1042->snap_type;
|
|
|
|
skb_pull(skb, hdrlen + sizeof(*rfc1042));
|
|
skb_push(skb, sizeof(*eth));
|
|
|
|
eth = (void *)skb->data;
|
|
ether_addr_copy(eth->h_dest, da);
|
|
ether_addr_copy(eth->h_source, sa);
|
|
eth->h_proto = type;
|
|
}
|
|
|
|
static void ath10k_tx_h_add_p2p_noa_ie(struct ath10k *ar,
|
|
struct ieee80211_vif *vif,
|
|
struct sk_buff *skb)
|
|
{
|
|
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
|
|
/* This is case only for P2P_GO */
|
|
if (vif->type != NL80211_IFTYPE_AP || !vif->p2p)
|
|
return;
|
|
|
|
if (unlikely(ieee80211_is_probe_resp(hdr->frame_control))) {
|
|
spin_lock_bh(&ar->data_lock);
|
|
if (arvif->u.ap.noa_data)
|
|
if (!pskb_expand_head(skb, 0, arvif->u.ap.noa_len,
|
|
GFP_ATOMIC))
|
|
skb_put_data(skb, arvif->u.ap.noa_data,
|
|
arvif->u.ap.noa_len);
|
|
spin_unlock_bh(&ar->data_lock);
|
|
}
|
|
}
|
|
|
|
static void ath10k_mac_tx_h_fill_cb(struct ath10k *ar,
|
|
struct ieee80211_vif *vif,
|
|
struct ieee80211_txq *txq,
|
|
struct sk_buff *skb)
|
|
{
|
|
struct ieee80211_hdr *hdr = (void *)skb->data;
|
|
struct ath10k_skb_cb *cb = ATH10K_SKB_CB(skb);
|
|
|
|
cb->flags = 0;
|
|
if (!ath10k_tx_h_use_hwcrypto(vif, skb))
|
|
cb->flags |= ATH10K_SKB_F_NO_HWCRYPT;
|
|
|
|
if (ieee80211_is_mgmt(hdr->frame_control))
|
|
cb->flags |= ATH10K_SKB_F_MGMT;
|
|
|
|
if (ieee80211_is_data_qos(hdr->frame_control))
|
|
cb->flags |= ATH10K_SKB_F_QOS;
|
|
|
|
cb->vif = vif;
|
|
cb->txq = txq;
|
|
}
|
|
|
|
bool ath10k_mac_tx_frm_has_freq(struct ath10k *ar)
|
|
{
|
|
/* FIXME: Not really sure since when the behaviour changed. At some
|
|
* point new firmware stopped requiring creation of peer entries for
|
|
* offchannel tx (and actually creating them causes issues with wmi-htc
|
|
* tx credit replenishment and reliability). Assuming it's at least 3.4
|
|
* because that's when the `freq` was introduced to TX_FRM HTT command.
|
|
*/
|
|
return (ar->htt.target_version_major >= 3 &&
|
|
ar->htt.target_version_minor >= 4 &&
|
|
ar->running_fw->fw_file.htt_op_version == ATH10K_FW_HTT_OP_VERSION_TLV);
|
|
}
|
|
|
|
static int ath10k_mac_tx_wmi_mgmt(struct ath10k *ar, struct sk_buff *skb)
|
|
{
|
|
struct sk_buff_head *q = &ar->wmi_mgmt_tx_queue;
|
|
int ret = 0;
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
|
|
if (skb_queue_len(q) == ATH10K_MAX_NUM_MGMT_PENDING) {
|
|
ath10k_warn(ar, "wmi mgmt tx queue is full\n");
|
|
ret = -ENOSPC;
|
|
goto unlock;
|
|
}
|
|
|
|
__skb_queue_tail(q, skb);
|
|
ieee80211_queue_work(ar->hw, &ar->wmi_mgmt_tx_work);
|
|
|
|
unlock:
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static enum ath10k_mac_tx_path
|
|
ath10k_mac_tx_h_get_txpath(struct ath10k *ar,
|
|
struct sk_buff *skb,
|
|
enum ath10k_hw_txrx_mode txmode)
|
|
{
|
|
switch (txmode) {
|
|
case ATH10K_HW_TXRX_RAW:
|
|
case ATH10K_HW_TXRX_NATIVE_WIFI:
|
|
case ATH10K_HW_TXRX_ETHERNET:
|
|
return ATH10K_MAC_TX_HTT;
|
|
case ATH10K_HW_TXRX_MGMT:
|
|
if (test_bit(ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX,
|
|
ar->running_fw->fw_file.fw_features) ||
|
|
test_bit(WMI_SERVICE_MGMT_TX_WMI,
|
|
ar->wmi.svc_map))
|
|
return ATH10K_MAC_TX_WMI_MGMT;
|
|
else if (ar->htt.target_version_major >= 3)
|
|
return ATH10K_MAC_TX_HTT;
|
|
else
|
|
return ATH10K_MAC_TX_HTT_MGMT;
|
|
}
|
|
|
|
return ATH10K_MAC_TX_UNKNOWN;
|
|
}
|
|
|
|
static int ath10k_mac_tx_submit(struct ath10k *ar,
|
|
enum ath10k_hw_txrx_mode txmode,
|
|
enum ath10k_mac_tx_path txpath,
|
|
struct sk_buff *skb)
|
|
{
|
|
struct ath10k_htt *htt = &ar->htt;
|
|
int ret = -EINVAL;
|
|
|
|
switch (txpath) {
|
|
case ATH10K_MAC_TX_HTT:
|
|
ret = ath10k_htt_tx(htt, txmode, skb);
|
|
break;
|
|
case ATH10K_MAC_TX_HTT_MGMT:
|
|
ret = ath10k_htt_mgmt_tx(htt, skb);
|
|
break;
|
|
case ATH10K_MAC_TX_WMI_MGMT:
|
|
ret = ath10k_mac_tx_wmi_mgmt(ar, skb);
|
|
break;
|
|
case ATH10K_MAC_TX_UNKNOWN:
|
|
WARN_ON_ONCE(1);
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to transmit packet, dropping: %d\n",
|
|
ret);
|
|
ieee80211_free_txskb(ar->hw, skb);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* This function consumes the sk_buff regardless of return value as far as
|
|
* caller is concerned so no freeing is necessary afterwards.
|
|
*/
|
|
static int ath10k_mac_tx(struct ath10k *ar,
|
|
struct ieee80211_vif *vif,
|
|
enum ath10k_hw_txrx_mode txmode,
|
|
enum ath10k_mac_tx_path txpath,
|
|
struct sk_buff *skb)
|
|
{
|
|
struct ieee80211_hw *hw = ar->hw;
|
|
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
|
|
int ret;
|
|
|
|
/* We should disable CCK RATE due to P2P */
|
|
if (info->flags & IEEE80211_TX_CTL_NO_CCK_RATE)
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "IEEE80211_TX_CTL_NO_CCK_RATE\n");
|
|
|
|
switch (txmode) {
|
|
case ATH10K_HW_TXRX_MGMT:
|
|
case ATH10K_HW_TXRX_NATIVE_WIFI:
|
|
ath10k_tx_h_nwifi(hw, skb);
|
|
ath10k_tx_h_add_p2p_noa_ie(ar, vif, skb);
|
|
ath10k_tx_h_seq_no(vif, skb);
|
|
break;
|
|
case ATH10K_HW_TXRX_ETHERNET:
|
|
ath10k_tx_h_8023(skb);
|
|
break;
|
|
case ATH10K_HW_TXRX_RAW:
|
|
if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) {
|
|
WARN_ON_ONCE(1);
|
|
ieee80211_free_txskb(hw, skb);
|
|
return -ENOTSUPP;
|
|
}
|
|
}
|
|
|
|
if (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) {
|
|
if (!ath10k_mac_tx_frm_has_freq(ar)) {
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "queued offchannel skb %pK\n",
|
|
skb);
|
|
|
|
skb_queue_tail(&ar->offchan_tx_queue, skb);
|
|
ieee80211_queue_work(hw, &ar->offchan_tx_work);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
ret = ath10k_mac_tx_submit(ar, txmode, txpath, skb);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to submit frame: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void ath10k_offchan_tx_purge(struct ath10k *ar)
|
|
{
|
|
struct sk_buff *skb;
|
|
|
|
for (;;) {
|
|
skb = skb_dequeue(&ar->offchan_tx_queue);
|
|
if (!skb)
|
|
break;
|
|
|
|
ieee80211_free_txskb(ar->hw, skb);
|
|
}
|
|
}
|
|
|
|
void ath10k_offchan_tx_work(struct work_struct *work)
|
|
{
|
|
struct ath10k *ar = container_of(work, struct ath10k, offchan_tx_work);
|
|
struct ath10k_peer *peer;
|
|
struct ath10k_vif *arvif;
|
|
enum ath10k_hw_txrx_mode txmode;
|
|
enum ath10k_mac_tx_path txpath;
|
|
struct ieee80211_hdr *hdr;
|
|
struct ieee80211_vif *vif;
|
|
struct ieee80211_sta *sta;
|
|
struct sk_buff *skb;
|
|
const u8 *peer_addr;
|
|
int vdev_id;
|
|
int ret;
|
|
unsigned long time_left;
|
|
bool tmp_peer_created = false;
|
|
|
|
/* FW requirement: We must create a peer before FW will send out
|
|
* an offchannel frame. Otherwise the frame will be stuck and
|
|
* never transmitted. We delete the peer upon tx completion.
|
|
* It is unlikely that a peer for offchannel tx will already be
|
|
* present. However it may be in some rare cases so account for that.
|
|
* Otherwise we might remove a legitimate peer and break stuff.
|
|
*/
|
|
|
|
for (;;) {
|
|
skb = skb_dequeue(&ar->offchan_tx_queue);
|
|
if (!skb)
|
|
break;
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac offchannel skb %pK\n",
|
|
skb);
|
|
|
|
hdr = (struct ieee80211_hdr *)skb->data;
|
|
peer_addr = ieee80211_get_DA(hdr);
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
vdev_id = ar->scan.vdev_id;
|
|
peer = ath10k_peer_find(ar, vdev_id, peer_addr);
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
if (peer)
|
|
/* FIXME: should this use ath10k_warn()? */
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "peer %pM on vdev %d already present\n",
|
|
peer_addr, vdev_id);
|
|
|
|
if (!peer) {
|
|
ret = ath10k_peer_create(ar, NULL, NULL, vdev_id,
|
|
peer_addr,
|
|
WMI_PEER_TYPE_DEFAULT);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to create peer %pM on vdev %d: %d\n",
|
|
peer_addr, vdev_id, ret);
|
|
tmp_peer_created = (ret == 0);
|
|
}
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
reinit_completion(&ar->offchan_tx_completed);
|
|
ar->offchan_tx_skb = skb;
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
/* It's safe to access vif and sta - conf_mutex guarantees that
|
|
* sta_state() and remove_interface() are locked exclusively
|
|
* out wrt to this offchannel worker.
|
|
*/
|
|
arvif = ath10k_get_arvif(ar, vdev_id);
|
|
if (arvif) {
|
|
vif = arvif->vif;
|
|
sta = ieee80211_find_sta(vif, peer_addr);
|
|
} else {
|
|
vif = NULL;
|
|
sta = NULL;
|
|
}
|
|
|
|
txmode = ath10k_mac_tx_h_get_txmode(ar, vif, sta, skb);
|
|
txpath = ath10k_mac_tx_h_get_txpath(ar, skb, txmode);
|
|
|
|
ret = ath10k_mac_tx(ar, vif, txmode, txpath, skb);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to transmit offchannel frame: %d\n",
|
|
ret);
|
|
/* not serious */
|
|
}
|
|
|
|
time_left =
|
|
wait_for_completion_timeout(&ar->offchan_tx_completed, 3 * HZ);
|
|
if (time_left == 0)
|
|
ath10k_warn(ar, "timed out waiting for offchannel skb %pK\n",
|
|
skb);
|
|
|
|
if (!peer && tmp_peer_created) {
|
|
ret = ath10k_peer_delete(ar, vdev_id, peer_addr);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to delete peer %pM on vdev %d: %d\n",
|
|
peer_addr, vdev_id, ret);
|
|
}
|
|
|
|
mutex_unlock(&ar->conf_mutex);
|
|
}
|
|
}
|
|
|
|
void ath10k_mgmt_over_wmi_tx_purge(struct ath10k *ar)
|
|
{
|
|
struct sk_buff *skb;
|
|
|
|
for (;;) {
|
|
skb = skb_dequeue(&ar->wmi_mgmt_tx_queue);
|
|
if (!skb)
|
|
break;
|
|
|
|
ieee80211_free_txskb(ar->hw, skb);
|
|
}
|
|
}
|
|
|
|
void ath10k_mgmt_over_wmi_tx_work(struct work_struct *work)
|
|
{
|
|
struct ath10k *ar = container_of(work, struct ath10k, wmi_mgmt_tx_work);
|
|
struct sk_buff *skb;
|
|
dma_addr_t paddr;
|
|
int ret;
|
|
|
|
for (;;) {
|
|
skb = skb_dequeue(&ar->wmi_mgmt_tx_queue);
|
|
if (!skb)
|
|
break;
|
|
|
|
if (test_bit(ATH10K_FW_FEATURE_MGMT_TX_BY_REF,
|
|
ar->running_fw->fw_file.fw_features)) {
|
|
paddr = dma_map_single(ar->dev, skb->data,
|
|
skb->len, DMA_TO_DEVICE);
|
|
if (!paddr)
|
|
continue;
|
|
ret = ath10k_wmi_mgmt_tx_send(ar, skb, paddr);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to transmit management frame by ref via WMI: %d\n",
|
|
ret);
|
|
dma_unmap_single(ar->dev, paddr, skb->len,
|
|
DMA_FROM_DEVICE);
|
|
ieee80211_free_txskb(ar->hw, skb);
|
|
}
|
|
} else {
|
|
ret = ath10k_wmi_mgmt_tx(ar, skb);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to transmit management frame via WMI: %d\n",
|
|
ret);
|
|
ieee80211_free_txskb(ar->hw, skb);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static void ath10k_mac_txq_init(struct ieee80211_txq *txq)
|
|
{
|
|
struct ath10k_txq *artxq;
|
|
|
|
if (!txq)
|
|
return;
|
|
|
|
artxq = (void *)txq->drv_priv;
|
|
INIT_LIST_HEAD(&artxq->list);
|
|
}
|
|
|
|
static void ath10k_mac_txq_unref(struct ath10k *ar, struct ieee80211_txq *txq)
|
|
{
|
|
struct ath10k_txq *artxq;
|
|
struct ath10k_skb_cb *cb;
|
|
struct sk_buff *msdu;
|
|
int msdu_id;
|
|
|
|
if (!txq)
|
|
return;
|
|
|
|
artxq = (void *)txq->drv_priv;
|
|
spin_lock_bh(&ar->txqs_lock);
|
|
if (!list_empty(&artxq->list))
|
|
list_del_init(&artxq->list);
|
|
spin_unlock_bh(&ar->txqs_lock);
|
|
|
|
spin_lock_bh(&ar->htt.tx_lock);
|
|
idr_for_each_entry(&ar->htt.pending_tx, msdu, msdu_id) {
|
|
cb = ATH10K_SKB_CB(msdu);
|
|
if (cb->txq == txq)
|
|
cb->txq = NULL;
|
|
}
|
|
spin_unlock_bh(&ar->htt.tx_lock);
|
|
}
|
|
|
|
struct ieee80211_txq *ath10k_mac_txq_lookup(struct ath10k *ar,
|
|
u16 peer_id,
|
|
u8 tid)
|
|
{
|
|
struct ath10k_peer *peer;
|
|
|
|
lockdep_assert_held(&ar->data_lock);
|
|
|
|
peer = ar->peer_map[peer_id];
|
|
if (!peer)
|
|
return NULL;
|
|
|
|
if (peer->removed)
|
|
return NULL;
|
|
|
|
if (peer->sta)
|
|
return peer->sta->txq[tid];
|
|
else if (peer->vif)
|
|
return peer->vif->txq;
|
|
else
|
|
return NULL;
|
|
}
|
|
|
|
static bool ath10k_mac_tx_can_push(struct ieee80211_hw *hw,
|
|
struct ieee80211_txq *txq)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
struct ath10k_txq *artxq = (void *)txq->drv_priv;
|
|
|
|
/* No need to get locks */
|
|
|
|
if (ar->htt.tx_q_state.mode == HTT_TX_MODE_SWITCH_PUSH)
|
|
return true;
|
|
|
|
if (ar->htt.num_pending_tx < ar->htt.tx_q_state.num_push_allowed)
|
|
return true;
|
|
|
|
if (artxq->num_fw_queued < artxq->num_push_allowed)
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
int ath10k_mac_tx_push_txq(struct ieee80211_hw *hw,
|
|
struct ieee80211_txq *txq)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
struct ath10k_htt *htt = &ar->htt;
|
|
struct ath10k_txq *artxq = (void *)txq->drv_priv;
|
|
struct ieee80211_vif *vif = txq->vif;
|
|
struct ieee80211_sta *sta = txq->sta;
|
|
enum ath10k_hw_txrx_mode txmode;
|
|
enum ath10k_mac_tx_path txpath;
|
|
struct sk_buff *skb;
|
|
struct ieee80211_hdr *hdr;
|
|
size_t skb_len;
|
|
bool is_mgmt, is_presp;
|
|
int ret;
|
|
|
|
spin_lock_bh(&ar->htt.tx_lock);
|
|
ret = ath10k_htt_tx_inc_pending(htt);
|
|
spin_unlock_bh(&ar->htt.tx_lock);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
skb = ieee80211_tx_dequeue(hw, txq);
|
|
if (!skb) {
|
|
spin_lock_bh(&ar->htt.tx_lock);
|
|
ath10k_htt_tx_dec_pending(htt);
|
|
spin_unlock_bh(&ar->htt.tx_lock);
|
|
|
|
return -ENOENT;
|
|
}
|
|
|
|
ath10k_mac_tx_h_fill_cb(ar, vif, txq, skb);
|
|
|
|
skb_len = skb->len;
|
|
txmode = ath10k_mac_tx_h_get_txmode(ar, vif, sta, skb);
|
|
txpath = ath10k_mac_tx_h_get_txpath(ar, skb, txmode);
|
|
is_mgmt = (txpath == ATH10K_MAC_TX_HTT_MGMT);
|
|
|
|
if (is_mgmt) {
|
|
hdr = (struct ieee80211_hdr *)skb->data;
|
|
is_presp = ieee80211_is_probe_resp(hdr->frame_control);
|
|
|
|
spin_lock_bh(&ar->htt.tx_lock);
|
|
ret = ath10k_htt_tx_mgmt_inc_pending(htt, is_mgmt, is_presp);
|
|
|
|
if (ret) {
|
|
ath10k_htt_tx_dec_pending(htt);
|
|
spin_unlock_bh(&ar->htt.tx_lock);
|
|
return ret;
|
|
}
|
|
spin_unlock_bh(&ar->htt.tx_lock);
|
|
}
|
|
|
|
ret = ath10k_mac_tx(ar, vif, txmode, txpath, skb);
|
|
if (unlikely(ret)) {
|
|
ath10k_warn(ar, "failed to push frame: %d\n", ret);
|
|
|
|
spin_lock_bh(&ar->htt.tx_lock);
|
|
ath10k_htt_tx_dec_pending(htt);
|
|
if (is_mgmt)
|
|
ath10k_htt_tx_mgmt_dec_pending(htt);
|
|
spin_unlock_bh(&ar->htt.tx_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
spin_lock_bh(&ar->htt.tx_lock);
|
|
artxq->num_fw_queued++;
|
|
spin_unlock_bh(&ar->htt.tx_lock);
|
|
|
|
return skb_len;
|
|
}
|
|
|
|
void ath10k_mac_tx_push_pending(struct ath10k *ar)
|
|
{
|
|
struct ieee80211_hw *hw = ar->hw;
|
|
struct ieee80211_txq *txq;
|
|
struct ath10k_txq *artxq;
|
|
struct ath10k_txq *last;
|
|
int ret;
|
|
int max;
|
|
|
|
if (ar->htt.num_pending_tx >= (ar->htt.max_num_pending_tx / 2))
|
|
return;
|
|
|
|
spin_lock_bh(&ar->txqs_lock);
|
|
rcu_read_lock();
|
|
|
|
last = list_last_entry(&ar->txqs, struct ath10k_txq, list);
|
|
while (!list_empty(&ar->txqs)) {
|
|
artxq = list_first_entry(&ar->txqs, struct ath10k_txq, list);
|
|
txq = container_of((void *)artxq, struct ieee80211_txq,
|
|
drv_priv);
|
|
|
|
/* Prevent aggressive sta/tid taking over tx queue */
|
|
max = 16;
|
|
ret = 0;
|
|
while (ath10k_mac_tx_can_push(hw, txq) && max--) {
|
|
ret = ath10k_mac_tx_push_txq(hw, txq);
|
|
if (ret < 0)
|
|
break;
|
|
}
|
|
|
|
list_del_init(&artxq->list);
|
|
if (ret != -ENOENT)
|
|
list_add_tail(&artxq->list, &ar->txqs);
|
|
|
|
ath10k_htt_tx_txq_update(hw, txq);
|
|
|
|
if (artxq == last || (ret < 0 && ret != -ENOENT))
|
|
break;
|
|
}
|
|
|
|
rcu_read_unlock();
|
|
spin_unlock_bh(&ar->txqs_lock);
|
|
}
|
|
|
|
/************/
|
|
/* Scanning */
|
|
/************/
|
|
|
|
void __ath10k_scan_finish(struct ath10k *ar)
|
|
{
|
|
lockdep_assert_held(&ar->data_lock);
|
|
|
|
switch (ar->scan.state) {
|
|
case ATH10K_SCAN_IDLE:
|
|
break;
|
|
case ATH10K_SCAN_RUNNING:
|
|
case ATH10K_SCAN_ABORTING:
|
|
if (!ar->scan.is_roc) {
|
|
struct cfg80211_scan_info info = {
|
|
.aborted = (ar->scan.state ==
|
|
ATH10K_SCAN_ABORTING),
|
|
};
|
|
|
|
ieee80211_scan_completed(ar->hw, &info);
|
|
} else if (ar->scan.roc_notify) {
|
|
ieee80211_remain_on_channel_expired(ar->hw);
|
|
}
|
|
/* fall through */
|
|
case ATH10K_SCAN_STARTING:
|
|
ar->scan.state = ATH10K_SCAN_IDLE;
|
|
ar->scan_channel = NULL;
|
|
ar->scan.roc_freq = 0;
|
|
ath10k_offchan_tx_purge(ar);
|
|
cancel_delayed_work(&ar->scan.timeout);
|
|
complete(&ar->scan.completed);
|
|
break;
|
|
}
|
|
}
|
|
|
|
void ath10k_scan_finish(struct ath10k *ar)
|
|
{
|
|
spin_lock_bh(&ar->data_lock);
|
|
__ath10k_scan_finish(ar);
|
|
spin_unlock_bh(&ar->data_lock);
|
|
}
|
|
|
|
static int ath10k_scan_stop(struct ath10k *ar)
|
|
{
|
|
struct wmi_stop_scan_arg arg = {
|
|
.req_id = 1, /* FIXME */
|
|
.req_type = WMI_SCAN_STOP_ONE,
|
|
.u.scan_id = ATH10K_SCAN_ID,
|
|
};
|
|
int ret;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
ret = ath10k_wmi_stop_scan(ar, &arg);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to stop wmi scan: %d\n", ret);
|
|
goto out;
|
|
}
|
|
|
|
ret = wait_for_completion_timeout(&ar->scan.completed, 3 * HZ);
|
|
if (ret == 0) {
|
|
ath10k_warn(ar, "failed to receive scan abortion completion: timed out\n");
|
|
ret = -ETIMEDOUT;
|
|
} else if (ret > 0) {
|
|
ret = 0;
|
|
}
|
|
|
|
out:
|
|
/* Scan state should be updated upon scan completion but in case
|
|
* firmware fails to deliver the event (for whatever reason) it is
|
|
* desired to clean up scan state anyway. Firmware may have just
|
|
* dropped the scan completion event delivery due to transport pipe
|
|
* being overflown with data and/or it can recover on its own before
|
|
* next scan request is submitted.
|
|
*/
|
|
spin_lock_bh(&ar->data_lock);
|
|
if (ar->scan.state != ATH10K_SCAN_IDLE)
|
|
__ath10k_scan_finish(ar);
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ath10k_scan_abort(struct ath10k *ar)
|
|
{
|
|
int ret;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
|
|
switch (ar->scan.state) {
|
|
case ATH10K_SCAN_IDLE:
|
|
/* This can happen if timeout worker kicked in and called
|
|
* abortion while scan completion was being processed.
|
|
*/
|
|
break;
|
|
case ATH10K_SCAN_STARTING:
|
|
case ATH10K_SCAN_ABORTING:
|
|
ath10k_warn(ar, "refusing scan abortion due to invalid scan state: %s (%d)\n",
|
|
ath10k_scan_state_str(ar->scan.state),
|
|
ar->scan.state);
|
|
break;
|
|
case ATH10K_SCAN_RUNNING:
|
|
ar->scan.state = ATH10K_SCAN_ABORTING;
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
ret = ath10k_scan_stop(ar);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to abort scan: %d\n", ret);
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
break;
|
|
}
|
|
|
|
spin_unlock_bh(&ar->data_lock);
|
|
}
|
|
|
|
void ath10k_scan_timeout_work(struct work_struct *work)
|
|
{
|
|
struct ath10k *ar = container_of(work, struct ath10k,
|
|
scan.timeout.work);
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
ath10k_scan_abort(ar);
|
|
mutex_unlock(&ar->conf_mutex);
|
|
}
|
|
|
|
static int ath10k_start_scan(struct ath10k *ar,
|
|
const struct wmi_start_scan_arg *arg)
|
|
{
|
|
int ret;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
ret = ath10k_wmi_start_scan(ar, arg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = wait_for_completion_timeout(&ar->scan.started, 1 * HZ);
|
|
if (ret == 0) {
|
|
ret = ath10k_scan_stop(ar);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to stop scan: %d\n", ret);
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/* If we failed to start the scan, return error code at
|
|
* this point. This is probably due to some issue in the
|
|
* firmware, but no need to wedge the driver due to that...
|
|
*/
|
|
spin_lock_bh(&ar->data_lock);
|
|
if (ar->scan.state == ATH10K_SCAN_IDLE) {
|
|
spin_unlock_bh(&ar->data_lock);
|
|
return -EINVAL;
|
|
}
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**********************/
|
|
/* mac80211 callbacks */
|
|
/**********************/
|
|
|
|
static void ath10k_mac_op_tx(struct ieee80211_hw *hw,
|
|
struct ieee80211_tx_control *control,
|
|
struct sk_buff *skb)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
struct ath10k_htt *htt = &ar->htt;
|
|
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
|
|
struct ieee80211_vif *vif = info->control.vif;
|
|
struct ieee80211_sta *sta = control->sta;
|
|
struct ieee80211_txq *txq = NULL;
|
|
struct ieee80211_hdr *hdr = (void *)skb->data;
|
|
enum ath10k_hw_txrx_mode txmode;
|
|
enum ath10k_mac_tx_path txpath;
|
|
bool is_htt;
|
|
bool is_mgmt;
|
|
bool is_presp;
|
|
int ret;
|
|
|
|
ath10k_mac_tx_h_fill_cb(ar, vif, txq, skb);
|
|
|
|
txmode = ath10k_mac_tx_h_get_txmode(ar, vif, sta, skb);
|
|
txpath = ath10k_mac_tx_h_get_txpath(ar, skb, txmode);
|
|
is_htt = (txpath == ATH10K_MAC_TX_HTT ||
|
|
txpath == ATH10K_MAC_TX_HTT_MGMT);
|
|
is_mgmt = (txpath == ATH10K_MAC_TX_HTT_MGMT);
|
|
|
|
if (is_htt) {
|
|
spin_lock_bh(&ar->htt.tx_lock);
|
|
is_presp = ieee80211_is_probe_resp(hdr->frame_control);
|
|
|
|
ret = ath10k_htt_tx_inc_pending(htt);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to increase tx pending count: %d, dropping\n",
|
|
ret);
|
|
spin_unlock_bh(&ar->htt.tx_lock);
|
|
ieee80211_free_txskb(ar->hw, skb);
|
|
return;
|
|
}
|
|
|
|
ret = ath10k_htt_tx_mgmt_inc_pending(htt, is_mgmt, is_presp);
|
|
if (ret) {
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "failed to increase tx mgmt pending count: %d, dropping\n",
|
|
ret);
|
|
ath10k_htt_tx_dec_pending(htt);
|
|
spin_unlock_bh(&ar->htt.tx_lock);
|
|
ieee80211_free_txskb(ar->hw, skb);
|
|
return;
|
|
}
|
|
spin_unlock_bh(&ar->htt.tx_lock);
|
|
}
|
|
|
|
ret = ath10k_mac_tx(ar, vif, txmode, txpath, skb);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to transmit frame: %d\n", ret);
|
|
if (is_htt) {
|
|
spin_lock_bh(&ar->htt.tx_lock);
|
|
ath10k_htt_tx_dec_pending(htt);
|
|
if (is_mgmt)
|
|
ath10k_htt_tx_mgmt_dec_pending(htt);
|
|
spin_unlock_bh(&ar->htt.tx_lock);
|
|
}
|
|
return;
|
|
}
|
|
}
|
|
|
|
static void ath10k_mac_op_wake_tx_queue(struct ieee80211_hw *hw,
|
|
struct ieee80211_txq *txq)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
struct ath10k_txq *artxq = (void *)txq->drv_priv;
|
|
struct ieee80211_txq *f_txq;
|
|
struct ath10k_txq *f_artxq;
|
|
int ret = 0;
|
|
int max = 16;
|
|
|
|
spin_lock_bh(&ar->txqs_lock);
|
|
if (list_empty(&artxq->list))
|
|
list_add_tail(&artxq->list, &ar->txqs);
|
|
|
|
f_artxq = list_first_entry(&ar->txqs, struct ath10k_txq, list);
|
|
f_txq = container_of((void *)f_artxq, struct ieee80211_txq, drv_priv);
|
|
list_del_init(&f_artxq->list);
|
|
|
|
while (ath10k_mac_tx_can_push(hw, f_txq) && max--) {
|
|
ret = ath10k_mac_tx_push_txq(hw, f_txq);
|
|
if (ret)
|
|
break;
|
|
}
|
|
if (ret != -ENOENT)
|
|
list_add_tail(&f_artxq->list, &ar->txqs);
|
|
spin_unlock_bh(&ar->txqs_lock);
|
|
|
|
ath10k_htt_tx_txq_update(hw, f_txq);
|
|
ath10k_htt_tx_txq_update(hw, txq);
|
|
}
|
|
|
|
/* Must not be called with conf_mutex held as workers can use that also. */
|
|
void ath10k_drain_tx(struct ath10k *ar)
|
|
{
|
|
/* make sure rcu-protected mac80211 tx path itself is drained */
|
|
synchronize_net();
|
|
|
|
ath10k_offchan_tx_purge(ar);
|
|
ath10k_mgmt_over_wmi_tx_purge(ar);
|
|
|
|
cancel_work_sync(&ar->offchan_tx_work);
|
|
cancel_work_sync(&ar->wmi_mgmt_tx_work);
|
|
}
|
|
|
|
void ath10k_halt(struct ath10k *ar)
|
|
{
|
|
struct ath10k_vif *arvif;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
clear_bit(ATH10K_CAC_RUNNING, &ar->dev_flags);
|
|
ar->filter_flags = 0;
|
|
ar->monitor = false;
|
|
ar->monitor_arvif = NULL;
|
|
|
|
if (ar->monitor_started)
|
|
ath10k_monitor_stop(ar);
|
|
|
|
ar->monitor_started = false;
|
|
ar->tx_paused = 0;
|
|
|
|
ath10k_scan_finish(ar);
|
|
ath10k_peer_cleanup_all(ar);
|
|
ath10k_core_stop(ar);
|
|
ath10k_hif_power_down(ar);
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
list_for_each_entry(arvif, &ar->arvifs, list)
|
|
ath10k_mac_vif_beacon_cleanup(arvif);
|
|
spin_unlock_bh(&ar->data_lock);
|
|
}
|
|
|
|
static int ath10k_get_antenna(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
|
|
*tx_ant = ar->cfg_tx_chainmask;
|
|
*rx_ant = ar->cfg_rx_chainmask;
|
|
|
|
mutex_unlock(&ar->conf_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ath10k_check_chain_mask(struct ath10k *ar, u32 cm, const char *dbg)
|
|
{
|
|
/* It is not clear that allowing gaps in chainmask
|
|
* is helpful. Probably it will not do what user
|
|
* is hoping for, so warn in that case.
|
|
*/
|
|
if (cm == 15 || cm == 7 || cm == 3 || cm == 1 || cm == 0)
|
|
return;
|
|
|
|
ath10k_warn(ar, "mac %s antenna chainmask may be invalid: 0x%x. Suggested values: 15, 7, 3, 1 or 0.\n",
|
|
dbg, cm);
|
|
}
|
|
|
|
static int ath10k_mac_get_vht_cap_bf_sts(struct ath10k *ar)
|
|
{
|
|
int nsts = ar->vht_cap_info;
|
|
|
|
nsts &= IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK;
|
|
nsts >>= IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT;
|
|
|
|
/* If firmware does not deliver to host number of space-time
|
|
* streams supported, assume it support up to 4 BF STS and return
|
|
* the value for VHT CAP: nsts-1)
|
|
*/
|
|
if (nsts == 0)
|
|
return 3;
|
|
|
|
return nsts;
|
|
}
|
|
|
|
static int ath10k_mac_get_vht_cap_bf_sound_dim(struct ath10k *ar)
|
|
{
|
|
int sound_dim = ar->vht_cap_info;
|
|
|
|
sound_dim &= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MASK;
|
|
sound_dim >>= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT;
|
|
|
|
/* If the sounding dimension is not advertised by the firmware,
|
|
* let's use a default value of 1
|
|
*/
|
|
if (sound_dim == 0)
|
|
return 1;
|
|
|
|
return sound_dim;
|
|
}
|
|
|
|
static struct ieee80211_sta_vht_cap ath10k_create_vht_cap(struct ath10k *ar)
|
|
{
|
|
struct ieee80211_sta_vht_cap vht_cap = {0};
|
|
struct ath10k_hw_params *hw = &ar->hw_params;
|
|
u16 mcs_map;
|
|
u32 val;
|
|
int i;
|
|
|
|
vht_cap.vht_supported = 1;
|
|
vht_cap.cap = ar->vht_cap_info;
|
|
|
|
if (ar->vht_cap_info & (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
|
|
IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE)) {
|
|
val = ath10k_mac_get_vht_cap_bf_sts(ar);
|
|
val <<= IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT;
|
|
val &= IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK;
|
|
|
|
vht_cap.cap |= val;
|
|
}
|
|
|
|
if (ar->vht_cap_info & (IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE |
|
|
IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)) {
|
|
val = ath10k_mac_get_vht_cap_bf_sound_dim(ar);
|
|
val <<= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT;
|
|
val &= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MASK;
|
|
|
|
vht_cap.cap |= val;
|
|
}
|
|
|
|
/* Currently the firmware seems to be buggy, don't enable 80+80
|
|
* mode until that's resolved.
|
|
*/
|
|
if ((ar->vht_cap_info & IEEE80211_VHT_CAP_SHORT_GI_160) &&
|
|
(ar->vht_cap_info & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) == 0)
|
|
vht_cap.cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
|
|
|
|
mcs_map = 0;
|
|
for (i = 0; i < 8; i++) {
|
|
if ((i < ar->num_rf_chains) && (ar->cfg_tx_chainmask & BIT(i)))
|
|
mcs_map |= IEEE80211_VHT_MCS_SUPPORT_0_9 << (i * 2);
|
|
else
|
|
mcs_map |= IEEE80211_VHT_MCS_NOT_SUPPORTED << (i * 2);
|
|
}
|
|
|
|
if (ar->cfg_tx_chainmask <= 1)
|
|
vht_cap.cap &= ~IEEE80211_VHT_CAP_TXSTBC;
|
|
|
|
vht_cap.vht_mcs.rx_mcs_map = cpu_to_le16(mcs_map);
|
|
vht_cap.vht_mcs.tx_mcs_map = cpu_to_le16(mcs_map);
|
|
|
|
/* If we are supporting 160Mhz or 80+80, then the NIC may be able to do
|
|
* a restricted NSS for 160 or 80+80 vs what it can do for 80Mhz. Give
|
|
* user-space a clue if that is the case.
|
|
*/
|
|
if ((vht_cap.cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) &&
|
|
(hw->vht160_mcs_rx_highest != 0 ||
|
|
hw->vht160_mcs_tx_highest != 0)) {
|
|
vht_cap.vht_mcs.rx_highest = cpu_to_le16(hw->vht160_mcs_rx_highest);
|
|
vht_cap.vht_mcs.tx_highest = cpu_to_le16(hw->vht160_mcs_tx_highest);
|
|
}
|
|
|
|
return vht_cap;
|
|
}
|
|
|
|
static struct ieee80211_sta_ht_cap ath10k_get_ht_cap(struct ath10k *ar)
|
|
{
|
|
int i;
|
|
struct ieee80211_sta_ht_cap ht_cap = {0};
|
|
|
|
if (!(ar->ht_cap_info & WMI_HT_CAP_ENABLED))
|
|
return ht_cap;
|
|
|
|
ht_cap.ht_supported = 1;
|
|
ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
|
|
ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_8;
|
|
ht_cap.cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
|
|
ht_cap.cap |= IEEE80211_HT_CAP_DSSSCCK40;
|
|
ht_cap.cap |=
|
|
WLAN_HT_CAP_SM_PS_DISABLED << IEEE80211_HT_CAP_SM_PS_SHIFT;
|
|
|
|
if (ar->ht_cap_info & WMI_HT_CAP_HT20_SGI)
|
|
ht_cap.cap |= IEEE80211_HT_CAP_SGI_20;
|
|
|
|
if (ar->ht_cap_info & WMI_HT_CAP_HT40_SGI)
|
|
ht_cap.cap |= IEEE80211_HT_CAP_SGI_40;
|
|
|
|
if (ar->ht_cap_info & WMI_HT_CAP_DYNAMIC_SMPS) {
|
|
u32 smps;
|
|
|
|
smps = WLAN_HT_CAP_SM_PS_DYNAMIC;
|
|
smps <<= IEEE80211_HT_CAP_SM_PS_SHIFT;
|
|
|
|
ht_cap.cap |= smps;
|
|
}
|
|
|
|
if (ar->ht_cap_info & WMI_HT_CAP_TX_STBC && (ar->cfg_tx_chainmask > 1))
|
|
ht_cap.cap |= IEEE80211_HT_CAP_TX_STBC;
|
|
|
|
if (ar->ht_cap_info & WMI_HT_CAP_RX_STBC) {
|
|
u32 stbc;
|
|
|
|
stbc = ar->ht_cap_info;
|
|
stbc &= WMI_HT_CAP_RX_STBC;
|
|
stbc >>= WMI_HT_CAP_RX_STBC_MASK_SHIFT;
|
|
stbc <<= IEEE80211_HT_CAP_RX_STBC_SHIFT;
|
|
stbc &= IEEE80211_HT_CAP_RX_STBC;
|
|
|
|
ht_cap.cap |= stbc;
|
|
}
|
|
|
|
if (ar->ht_cap_info & WMI_HT_CAP_LDPC)
|
|
ht_cap.cap |= IEEE80211_HT_CAP_LDPC_CODING;
|
|
|
|
if (ar->ht_cap_info & WMI_HT_CAP_L_SIG_TXOP_PROT)
|
|
ht_cap.cap |= IEEE80211_HT_CAP_LSIG_TXOP_PROT;
|
|
|
|
/* max AMSDU is implicitly taken from vht_cap_info */
|
|
if (ar->vht_cap_info & WMI_VHT_CAP_MAX_MPDU_LEN_MASK)
|
|
ht_cap.cap |= IEEE80211_HT_CAP_MAX_AMSDU;
|
|
|
|
for (i = 0; i < ar->num_rf_chains; i++) {
|
|
if (ar->cfg_rx_chainmask & BIT(i))
|
|
ht_cap.mcs.rx_mask[i] = 0xFF;
|
|
}
|
|
|
|
ht_cap.mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED;
|
|
|
|
return ht_cap;
|
|
}
|
|
|
|
static void ath10k_mac_setup_ht_vht_cap(struct ath10k *ar)
|
|
{
|
|
struct ieee80211_supported_band *band;
|
|
struct ieee80211_sta_vht_cap vht_cap;
|
|
struct ieee80211_sta_ht_cap ht_cap;
|
|
|
|
ht_cap = ath10k_get_ht_cap(ar);
|
|
vht_cap = ath10k_create_vht_cap(ar);
|
|
|
|
if (ar->phy_capability & WHAL_WLAN_11G_CAPABILITY) {
|
|
band = &ar->mac.sbands[NL80211_BAND_2GHZ];
|
|
band->ht_cap = ht_cap;
|
|
}
|
|
if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY) {
|
|
band = &ar->mac.sbands[NL80211_BAND_5GHZ];
|
|
band->ht_cap = ht_cap;
|
|
band->vht_cap = vht_cap;
|
|
}
|
|
}
|
|
|
|
static int __ath10k_set_antenna(struct ath10k *ar, u32 tx_ant, u32 rx_ant)
|
|
{
|
|
int ret;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
ath10k_check_chain_mask(ar, tx_ant, "tx");
|
|
ath10k_check_chain_mask(ar, rx_ant, "rx");
|
|
|
|
ar->cfg_tx_chainmask = tx_ant;
|
|
ar->cfg_rx_chainmask = rx_ant;
|
|
|
|
if ((ar->state != ATH10K_STATE_ON) &&
|
|
(ar->state != ATH10K_STATE_RESTARTED))
|
|
return 0;
|
|
|
|
ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->tx_chain_mask,
|
|
tx_ant);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to set tx-chainmask: %d, req 0x%x\n",
|
|
ret, tx_ant);
|
|
return ret;
|
|
}
|
|
|
|
ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->rx_chain_mask,
|
|
rx_ant);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to set rx-chainmask: %d, req 0x%x\n",
|
|
ret, rx_ant);
|
|
return ret;
|
|
}
|
|
|
|
/* Reload HT/VHT capability */
|
|
ath10k_mac_setup_ht_vht_cap(ar);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_set_antenna(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
int ret;
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
ret = __ath10k_set_antenna(ar, tx_ant, rx_ant);
|
|
mutex_unlock(&ar->conf_mutex);
|
|
return ret;
|
|
}
|
|
|
|
static int ath10k_start(struct ieee80211_hw *hw)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
u32 param;
|
|
int ret = 0;
|
|
|
|
/*
|
|
* This makes sense only when restarting hw. It is harmless to call
|
|
* unconditionally. This is necessary to make sure no HTT/WMI tx
|
|
* commands will be submitted while restarting.
|
|
*/
|
|
ath10k_drain_tx(ar);
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
|
|
switch (ar->state) {
|
|
case ATH10K_STATE_OFF:
|
|
ar->state = ATH10K_STATE_ON;
|
|
break;
|
|
case ATH10K_STATE_RESTARTING:
|
|
ar->state = ATH10K_STATE_RESTARTED;
|
|
break;
|
|
case ATH10K_STATE_ON:
|
|
case ATH10K_STATE_RESTARTED:
|
|
case ATH10K_STATE_WEDGED:
|
|
WARN_ON(1);
|
|
ret = -EINVAL;
|
|
goto err;
|
|
case ATH10K_STATE_UTF:
|
|
ret = -EBUSY;
|
|
goto err;
|
|
}
|
|
|
|
ret = ath10k_hif_power_up(ar);
|
|
if (ret) {
|
|
ath10k_err(ar, "Could not init hif: %d\n", ret);
|
|
goto err_off;
|
|
}
|
|
|
|
ret = ath10k_core_start(ar, ATH10K_FIRMWARE_MODE_NORMAL,
|
|
&ar->normal_mode_fw);
|
|
if (ret) {
|
|
ath10k_err(ar, "Could not init core: %d\n", ret);
|
|
goto err_power_down;
|
|
}
|
|
|
|
param = ar->wmi.pdev_param->pmf_qos;
|
|
ret = ath10k_wmi_pdev_set_param(ar, param, 1);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to enable PMF QOS: %d\n", ret);
|
|
goto err_core_stop;
|
|
}
|
|
|
|
param = ar->wmi.pdev_param->dynamic_bw;
|
|
ret = ath10k_wmi_pdev_set_param(ar, param, 1);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to enable dynamic BW: %d\n", ret);
|
|
goto err_core_stop;
|
|
}
|
|
|
|
if (test_bit(WMI_SERVICE_ADAPTIVE_OCS, ar->wmi.svc_map)) {
|
|
ret = ath10k_wmi_adaptive_qcs(ar, true);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to enable adaptive qcs: %d\n",
|
|
ret);
|
|
goto err_core_stop;
|
|
}
|
|
}
|
|
|
|
if (test_bit(WMI_SERVICE_BURST, ar->wmi.svc_map)) {
|
|
param = ar->wmi.pdev_param->burst_enable;
|
|
ret = ath10k_wmi_pdev_set_param(ar, param, 0);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to disable burst: %d\n", ret);
|
|
goto err_core_stop;
|
|
}
|
|
}
|
|
|
|
__ath10k_set_antenna(ar, ar->cfg_tx_chainmask, ar->cfg_rx_chainmask);
|
|
|
|
/*
|
|
* By default FW set ARP frames ac to voice (6). In that case ARP
|
|
* exchange is not working properly for UAPSD enabled AP. ARP requests
|
|
* which arrives with access category 0 are processed by network stack
|
|
* and send back with access category 0, but FW changes access category
|
|
* to 6. Set ARP frames access category to best effort (0) solves
|
|
* this problem.
|
|
*/
|
|
|
|
param = ar->wmi.pdev_param->arp_ac_override;
|
|
ret = ath10k_wmi_pdev_set_param(ar, param, 0);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to set arp ac override parameter: %d\n",
|
|
ret);
|
|
goto err_core_stop;
|
|
}
|
|
|
|
if (test_bit(ATH10K_FW_FEATURE_SUPPORTS_ADAPTIVE_CCA,
|
|
ar->running_fw->fw_file.fw_features)) {
|
|
ret = ath10k_wmi_pdev_enable_adaptive_cca(ar, 1,
|
|
WMI_CCA_DETECT_LEVEL_AUTO,
|
|
WMI_CCA_DETECT_MARGIN_AUTO);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to enable adaptive cca: %d\n",
|
|
ret);
|
|
goto err_core_stop;
|
|
}
|
|
}
|
|
|
|
param = ar->wmi.pdev_param->ani_enable;
|
|
ret = ath10k_wmi_pdev_set_param(ar, param, 1);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to enable ani by default: %d\n",
|
|
ret);
|
|
goto err_core_stop;
|
|
}
|
|
|
|
ar->ani_enabled = true;
|
|
|
|
if (ath10k_peer_stats_enabled(ar)) {
|
|
param = ar->wmi.pdev_param->peer_stats_update_period;
|
|
ret = ath10k_wmi_pdev_set_param(ar, param,
|
|
PEER_DEFAULT_STATS_UPDATE_PERIOD);
|
|
if (ret) {
|
|
ath10k_warn(ar,
|
|
"failed to set peer stats period : %d\n",
|
|
ret);
|
|
goto err_core_stop;
|
|
}
|
|
}
|
|
|
|
param = ar->wmi.pdev_param->enable_btcoex;
|
|
if (test_bit(WMI_SERVICE_COEX_GPIO, ar->wmi.svc_map) &&
|
|
test_bit(ATH10K_FW_FEATURE_BTCOEX_PARAM,
|
|
ar->running_fw->fw_file.fw_features)) {
|
|
ret = ath10k_wmi_pdev_set_param(ar, param, 0);
|
|
if (ret) {
|
|
ath10k_warn(ar,
|
|
"failed to set btcoex param: %d\n", ret);
|
|
goto err_core_stop;
|
|
}
|
|
clear_bit(ATH10K_FLAG_BTCOEX, &ar->dev_flags);
|
|
}
|
|
|
|
ar->num_started_vdevs = 0;
|
|
ath10k_regd_update(ar);
|
|
|
|
ath10k_spectral_start(ar);
|
|
ath10k_thermal_set_throttling(ar);
|
|
|
|
mutex_unlock(&ar->conf_mutex);
|
|
return 0;
|
|
|
|
err_core_stop:
|
|
ath10k_core_stop(ar);
|
|
|
|
err_power_down:
|
|
ath10k_hif_power_down(ar);
|
|
|
|
err_off:
|
|
ar->state = ATH10K_STATE_OFF;
|
|
|
|
err:
|
|
mutex_unlock(&ar->conf_mutex);
|
|
return ret;
|
|
}
|
|
|
|
static void ath10k_stop(struct ieee80211_hw *hw)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
|
|
ath10k_drain_tx(ar);
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
if (ar->state != ATH10K_STATE_OFF) {
|
|
ath10k_halt(ar);
|
|
ar->state = ATH10K_STATE_OFF;
|
|
}
|
|
mutex_unlock(&ar->conf_mutex);
|
|
|
|
cancel_work_sync(&ar->set_coverage_class_work);
|
|
cancel_delayed_work_sync(&ar->scan.timeout);
|
|
cancel_work_sync(&ar->restart_work);
|
|
}
|
|
|
|
static int ath10k_config_ps(struct ath10k *ar)
|
|
{
|
|
struct ath10k_vif *arvif;
|
|
int ret = 0;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
list_for_each_entry(arvif, &ar->arvifs, list) {
|
|
ret = ath10k_mac_vif_setup_ps(arvif);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to setup powersave: %d\n", ret);
|
|
break;
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ath10k_mac_txpower_setup(struct ath10k *ar, int txpower)
|
|
{
|
|
int ret;
|
|
u32 param;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac txpower %d\n", txpower);
|
|
|
|
param = ar->wmi.pdev_param->txpower_limit2g;
|
|
ret = ath10k_wmi_pdev_set_param(ar, param, txpower * 2);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to set 2g txpower %d: %d\n",
|
|
txpower, ret);
|
|
return ret;
|
|
}
|
|
|
|
param = ar->wmi.pdev_param->txpower_limit5g;
|
|
ret = ath10k_wmi_pdev_set_param(ar, param, txpower * 2);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to set 5g txpower %d: %d\n",
|
|
txpower, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_mac_txpower_recalc(struct ath10k *ar)
|
|
{
|
|
struct ath10k_vif *arvif;
|
|
int ret, txpower = -1;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
list_for_each_entry(arvif, &ar->arvifs, list) {
|
|
if (arvif->txpower <= 0)
|
|
continue;
|
|
|
|
if (txpower == -1)
|
|
txpower = arvif->txpower;
|
|
else
|
|
txpower = min(txpower, arvif->txpower);
|
|
}
|
|
|
|
if (txpower == -1)
|
|
return 0;
|
|
|
|
ret = ath10k_mac_txpower_setup(ar, txpower);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to setup tx power %d: %d\n",
|
|
txpower, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_config(struct ieee80211_hw *hw, u32 changed)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
struct ieee80211_conf *conf = &hw->conf;
|
|
int ret = 0;
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
|
|
if (changed & IEEE80211_CONF_CHANGE_PS)
|
|
ath10k_config_ps(ar);
|
|
|
|
if (changed & IEEE80211_CONF_CHANGE_MONITOR) {
|
|
ar->monitor = conf->flags & IEEE80211_CONF_MONITOR;
|
|
ret = ath10k_monitor_recalc(ar);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to recalc monitor: %d\n", ret);
|
|
}
|
|
|
|
mutex_unlock(&ar->conf_mutex);
|
|
return ret;
|
|
}
|
|
|
|
static u32 get_nss_from_chainmask(u16 chain_mask)
|
|
{
|
|
if ((chain_mask & 0xf) == 0xf)
|
|
return 4;
|
|
else if ((chain_mask & 0x7) == 0x7)
|
|
return 3;
|
|
else if ((chain_mask & 0x3) == 0x3)
|
|
return 2;
|
|
return 1;
|
|
}
|
|
|
|
static int ath10k_mac_set_txbf_conf(struct ath10k_vif *arvif)
|
|
{
|
|
u32 value = 0;
|
|
struct ath10k *ar = arvif->ar;
|
|
int nsts;
|
|
int sound_dim;
|
|
|
|
if (ath10k_wmi_get_txbf_conf_scheme(ar) != WMI_TXBF_CONF_BEFORE_ASSOC)
|
|
return 0;
|
|
|
|
nsts = ath10k_mac_get_vht_cap_bf_sts(ar);
|
|
if (ar->vht_cap_info & (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
|
|
IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE))
|
|
value |= SM(nsts, WMI_TXBF_STS_CAP_OFFSET);
|
|
|
|
sound_dim = ath10k_mac_get_vht_cap_bf_sound_dim(ar);
|
|
if (ar->vht_cap_info & (IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE |
|
|
IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE))
|
|
value |= SM(sound_dim, WMI_BF_SOUND_DIM_OFFSET);
|
|
|
|
if (!value)
|
|
return 0;
|
|
|
|
if (ar->vht_cap_info & IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE)
|
|
value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFER;
|
|
|
|
if (ar->vht_cap_info & IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)
|
|
value |= (WMI_VDEV_PARAM_TXBF_MU_TX_BFER |
|
|
WMI_VDEV_PARAM_TXBF_SU_TX_BFER);
|
|
|
|
if (ar->vht_cap_info & IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE)
|
|
value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFEE;
|
|
|
|
if (ar->vht_cap_info & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE)
|
|
value |= (WMI_VDEV_PARAM_TXBF_MU_TX_BFEE |
|
|
WMI_VDEV_PARAM_TXBF_SU_TX_BFEE);
|
|
|
|
return ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
|
|
ar->wmi.vdev_param->txbf, value);
|
|
}
|
|
|
|
/*
|
|
* TODO:
|
|
* Figure out how to handle WMI_VDEV_SUBTYPE_P2P_DEVICE,
|
|
* because we will send mgmt frames without CCK. This requirement
|
|
* for P2P_FIND/GO_NEG should be handled by checking CCK flag
|
|
* in the TX packet.
|
|
*/
|
|
static int ath10k_add_interface(struct ieee80211_hw *hw,
|
|
struct ieee80211_vif *vif)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
struct ath10k_peer *peer;
|
|
enum wmi_sta_powersave_param param;
|
|
int ret = 0;
|
|
u32 value;
|
|
int bit;
|
|
int i;
|
|
u32 vdev_param;
|
|
|
|
vif->driver_flags |= IEEE80211_VIF_SUPPORTS_UAPSD;
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
|
|
memset(arvif, 0, sizeof(*arvif));
|
|
ath10k_mac_txq_init(vif->txq);
|
|
|
|
arvif->ar = ar;
|
|
arvif->vif = vif;
|
|
|
|
INIT_LIST_HEAD(&arvif->list);
|
|
INIT_WORK(&arvif->ap_csa_work, ath10k_mac_vif_ap_csa_work);
|
|
INIT_DELAYED_WORK(&arvif->connection_loss_work,
|
|
ath10k_mac_vif_sta_connection_loss_work);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(arvif->bitrate_mask.control); i++) {
|
|
arvif->bitrate_mask.control[i].legacy = 0xffffffff;
|
|
memset(arvif->bitrate_mask.control[i].ht_mcs, 0xff,
|
|
sizeof(arvif->bitrate_mask.control[i].ht_mcs));
|
|
memset(arvif->bitrate_mask.control[i].vht_mcs, 0xff,
|
|
sizeof(arvif->bitrate_mask.control[i].vht_mcs));
|
|
}
|
|
|
|
if (ar->num_peers >= ar->max_num_peers) {
|
|
ath10k_warn(ar, "refusing vdev creation due to insufficient peer entry resources in firmware\n");
|
|
ret = -ENOBUFS;
|
|
goto err;
|
|
}
|
|
|
|
if (ar->free_vdev_map == 0) {
|
|
ath10k_warn(ar, "Free vdev map is empty, no more interfaces allowed.\n");
|
|
ret = -EBUSY;
|
|
goto err;
|
|
}
|
|
bit = __ffs64(ar->free_vdev_map);
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac create vdev %i map %llx\n",
|
|
bit, ar->free_vdev_map);
|
|
|
|
arvif->vdev_id = bit;
|
|
arvif->vdev_subtype =
|
|
ath10k_wmi_get_vdev_subtype(ar, WMI_VDEV_SUBTYPE_NONE);
|
|
|
|
switch (vif->type) {
|
|
case NL80211_IFTYPE_P2P_DEVICE:
|
|
arvif->vdev_type = WMI_VDEV_TYPE_STA;
|
|
arvif->vdev_subtype = ath10k_wmi_get_vdev_subtype
|
|
(ar, WMI_VDEV_SUBTYPE_P2P_DEVICE);
|
|
break;
|
|
case NL80211_IFTYPE_UNSPECIFIED:
|
|
case NL80211_IFTYPE_STATION:
|
|
arvif->vdev_type = WMI_VDEV_TYPE_STA;
|
|
if (vif->p2p)
|
|
arvif->vdev_subtype = ath10k_wmi_get_vdev_subtype
|
|
(ar, WMI_VDEV_SUBTYPE_P2P_CLIENT);
|
|
break;
|
|
case NL80211_IFTYPE_ADHOC:
|
|
arvif->vdev_type = WMI_VDEV_TYPE_IBSS;
|
|
break;
|
|
case NL80211_IFTYPE_MESH_POINT:
|
|
if (test_bit(WMI_SERVICE_MESH_11S, ar->wmi.svc_map)) {
|
|
arvif->vdev_subtype = ath10k_wmi_get_vdev_subtype
|
|
(ar, WMI_VDEV_SUBTYPE_MESH_11S);
|
|
} else if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) {
|
|
ret = -EINVAL;
|
|
ath10k_warn(ar, "must load driver with rawmode=1 to add mesh interfaces\n");
|
|
goto err;
|
|
}
|
|
arvif->vdev_type = WMI_VDEV_TYPE_AP;
|
|
break;
|
|
case NL80211_IFTYPE_AP:
|
|
arvif->vdev_type = WMI_VDEV_TYPE_AP;
|
|
|
|
if (vif->p2p)
|
|
arvif->vdev_subtype = ath10k_wmi_get_vdev_subtype
|
|
(ar, WMI_VDEV_SUBTYPE_P2P_GO);
|
|
break;
|
|
case NL80211_IFTYPE_MONITOR:
|
|
arvif->vdev_type = WMI_VDEV_TYPE_MONITOR;
|
|
break;
|
|
default:
|
|
WARN_ON(1);
|
|
break;
|
|
}
|
|
|
|
/* Using vdev_id as queue number will make it very easy to do per-vif
|
|
* tx queue locking. This shouldn't wrap due to interface combinations
|
|
* but do a modulo for correctness sake and prevent using offchannel tx
|
|
* queues for regular vif tx.
|
|
*/
|
|
vif->cab_queue = arvif->vdev_id % (IEEE80211_MAX_QUEUES - 1);
|
|
for (i = 0; i < ARRAY_SIZE(vif->hw_queue); i++)
|
|
vif->hw_queue[i] = arvif->vdev_id % (IEEE80211_MAX_QUEUES - 1);
|
|
|
|
/* Some firmware revisions don't wait for beacon tx completion before
|
|
* sending another SWBA event. This could lead to hardware using old
|
|
* (freed) beacon data in some cases, e.g. tx credit starvation
|
|
* combined with missed TBTT. This is very very rare.
|
|
*
|
|
* On non-IOMMU-enabled hosts this could be a possible security issue
|
|
* because hw could beacon some random data on the air. On
|
|
* IOMMU-enabled hosts DMAR faults would occur in most cases and target
|
|
* device would crash.
|
|
*
|
|
* Since there are no beacon tx completions (implicit nor explicit)
|
|
* propagated to host the only workaround for this is to allocate a
|
|
* DMA-coherent buffer for a lifetime of a vif and use it for all
|
|
* beacon tx commands. Worst case for this approach is some beacons may
|
|
* become corrupted, e.g. have garbled IEs or out-of-date TIM bitmap.
|
|
*/
|
|
if (vif->type == NL80211_IFTYPE_ADHOC ||
|
|
vif->type == NL80211_IFTYPE_MESH_POINT ||
|
|
vif->type == NL80211_IFTYPE_AP) {
|
|
arvif->beacon_buf = dma_zalloc_coherent(ar->dev,
|
|
IEEE80211_MAX_FRAME_LEN,
|
|
&arvif->beacon_paddr,
|
|
GFP_ATOMIC);
|
|
if (!arvif->beacon_buf) {
|
|
ret = -ENOMEM;
|
|
ath10k_warn(ar, "failed to allocate beacon buffer: %d\n",
|
|
ret);
|
|
goto err;
|
|
}
|
|
}
|
|
if (test_bit(ATH10K_FLAG_HW_CRYPTO_DISABLED, &ar->dev_flags))
|
|
arvif->nohwcrypt = true;
|
|
|
|
if (arvif->nohwcrypt &&
|
|
!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) {
|
|
ath10k_warn(ar, "cryptmode module param needed for sw crypto\n");
|
|
goto err;
|
|
}
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev create %d (add interface) type %d subtype %d bcnmode %s\n",
|
|
arvif->vdev_id, arvif->vdev_type, arvif->vdev_subtype,
|
|
arvif->beacon_buf ? "single-buf" : "per-skb");
|
|
|
|
ret = ath10k_wmi_vdev_create(ar, arvif->vdev_id, arvif->vdev_type,
|
|
arvif->vdev_subtype, vif->addr);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to create WMI vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
goto err;
|
|
}
|
|
|
|
ar->free_vdev_map &= ~(1LL << arvif->vdev_id);
|
|
spin_lock_bh(&ar->data_lock);
|
|
list_add(&arvif->list, &ar->arvifs);
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
/* It makes no sense to have firmware do keepalives. mac80211 already
|
|
* takes care of this with idle connection polling.
|
|
*/
|
|
ret = ath10k_mac_vif_disable_keepalive(arvif);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to disable keepalive on vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
goto err_vdev_delete;
|
|
}
|
|
|
|
arvif->def_wep_key_idx = -1;
|
|
|
|
vdev_param = ar->wmi.vdev_param->tx_encap_type;
|
|
ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
|
|
ATH10K_HW_TXRX_NATIVE_WIFI);
|
|
/* 10.X firmware does not support this VDEV parameter. Do not warn */
|
|
if (ret && ret != -EOPNOTSUPP) {
|
|
ath10k_warn(ar, "failed to set vdev %i TX encapsulation: %d\n",
|
|
arvif->vdev_id, ret);
|
|
goto err_vdev_delete;
|
|
}
|
|
|
|
/* Configuring number of spatial stream for monitor interface is causing
|
|
* target assert in qca9888 and qca6174.
|
|
*/
|
|
if (ar->cfg_tx_chainmask && (vif->type != NL80211_IFTYPE_MONITOR)) {
|
|
u16 nss = get_nss_from_chainmask(ar->cfg_tx_chainmask);
|
|
|
|
vdev_param = ar->wmi.vdev_param->nss;
|
|
ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
|
|
nss);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to set vdev %i chainmask 0x%x, nss %i: %d\n",
|
|
arvif->vdev_id, ar->cfg_tx_chainmask, nss,
|
|
ret);
|
|
goto err_vdev_delete;
|
|
}
|
|
}
|
|
|
|
if (arvif->vdev_type == WMI_VDEV_TYPE_AP ||
|
|
arvif->vdev_type == WMI_VDEV_TYPE_IBSS) {
|
|
ret = ath10k_peer_create(ar, vif, NULL, arvif->vdev_id,
|
|
vif->addr, WMI_PEER_TYPE_DEFAULT);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to create vdev %i peer for AP/IBSS: %d\n",
|
|
arvif->vdev_id, ret);
|
|
goto err_vdev_delete;
|
|
}
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
|
|
peer = ath10k_peer_find(ar, arvif->vdev_id, vif->addr);
|
|
if (!peer) {
|
|
ath10k_warn(ar, "failed to lookup peer %pM on vdev %i\n",
|
|
vif->addr, arvif->vdev_id);
|
|
spin_unlock_bh(&ar->data_lock);
|
|
ret = -ENOENT;
|
|
goto err_peer_delete;
|
|
}
|
|
|
|
arvif->peer_id = find_first_bit(peer->peer_ids,
|
|
ATH10K_MAX_NUM_PEER_IDS);
|
|
|
|
spin_unlock_bh(&ar->data_lock);
|
|
} else {
|
|
arvif->peer_id = HTT_INVALID_PEERID;
|
|
}
|
|
|
|
if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
|
|
ret = ath10k_mac_set_kickout(arvif);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to set vdev %i kickout parameters: %d\n",
|
|
arvif->vdev_id, ret);
|
|
goto err_peer_delete;
|
|
}
|
|
}
|
|
|
|
if (arvif->vdev_type == WMI_VDEV_TYPE_STA) {
|
|
param = WMI_STA_PS_PARAM_RX_WAKE_POLICY;
|
|
value = WMI_STA_PS_RX_WAKE_POLICY_WAKE;
|
|
ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
|
|
param, value);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to set vdev %i RX wake policy: %d\n",
|
|
arvif->vdev_id, ret);
|
|
goto err_peer_delete;
|
|
}
|
|
|
|
ret = ath10k_mac_vif_recalc_ps_wake_threshold(arvif);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to recalc ps wake threshold on vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
goto err_peer_delete;
|
|
}
|
|
|
|
ret = ath10k_mac_vif_recalc_ps_poll_count(arvif);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to recalc ps poll count on vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
goto err_peer_delete;
|
|
}
|
|
}
|
|
|
|
ret = ath10k_mac_set_txbf_conf(arvif);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to set txbf for vdev %d: %d\n",
|
|
arvif->vdev_id, ret);
|
|
goto err_peer_delete;
|
|
}
|
|
|
|
ret = ath10k_mac_set_rts(arvif, ar->hw->wiphy->rts_threshold);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to set rts threshold for vdev %d: %d\n",
|
|
arvif->vdev_id, ret);
|
|
goto err_peer_delete;
|
|
}
|
|
|
|
arvif->txpower = vif->bss_conf.txpower;
|
|
ret = ath10k_mac_txpower_recalc(ar);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to recalc tx power: %d\n", ret);
|
|
goto err_peer_delete;
|
|
}
|
|
|
|
if (vif->type == NL80211_IFTYPE_MONITOR) {
|
|
ar->monitor_arvif = arvif;
|
|
ret = ath10k_monitor_recalc(ar);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to recalc monitor: %d\n", ret);
|
|
goto err_peer_delete;
|
|
}
|
|
}
|
|
|
|
spin_lock_bh(&ar->htt.tx_lock);
|
|
if (!ar->tx_paused)
|
|
ieee80211_wake_queue(ar->hw, arvif->vdev_id);
|
|
spin_unlock_bh(&ar->htt.tx_lock);
|
|
|
|
mutex_unlock(&ar->conf_mutex);
|
|
return 0;
|
|
|
|
err_peer_delete:
|
|
if (arvif->vdev_type == WMI_VDEV_TYPE_AP ||
|
|
arvif->vdev_type == WMI_VDEV_TYPE_IBSS)
|
|
ath10k_wmi_peer_delete(ar, arvif->vdev_id, vif->addr);
|
|
|
|
err_vdev_delete:
|
|
ath10k_wmi_vdev_delete(ar, arvif->vdev_id);
|
|
ar->free_vdev_map |= 1LL << arvif->vdev_id;
|
|
spin_lock_bh(&ar->data_lock);
|
|
list_del(&arvif->list);
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
err:
|
|
if (arvif->beacon_buf) {
|
|
dma_free_coherent(ar->dev, IEEE80211_MAX_FRAME_LEN,
|
|
arvif->beacon_buf, arvif->beacon_paddr);
|
|
arvif->beacon_buf = NULL;
|
|
}
|
|
|
|
mutex_unlock(&ar->conf_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ath10k_mac_vif_tx_unlock_all(struct ath10k_vif *arvif)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < BITS_PER_LONG; i++)
|
|
ath10k_mac_vif_tx_unlock(arvif, i);
|
|
}
|
|
|
|
static void ath10k_remove_interface(struct ieee80211_hw *hw,
|
|
struct ieee80211_vif *vif)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
struct ath10k_peer *peer;
|
|
int ret;
|
|
int i;
|
|
|
|
cancel_work_sync(&arvif->ap_csa_work);
|
|
cancel_delayed_work_sync(&arvif->connection_loss_work);
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
ath10k_mac_vif_beacon_cleanup(arvif);
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
ret = ath10k_spectral_vif_stop(arvif);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to stop spectral for vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
|
|
ar->free_vdev_map |= 1LL << arvif->vdev_id;
|
|
spin_lock_bh(&ar->data_lock);
|
|
list_del(&arvif->list);
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
if (arvif->vdev_type == WMI_VDEV_TYPE_AP ||
|
|
arvif->vdev_type == WMI_VDEV_TYPE_IBSS) {
|
|
ret = ath10k_wmi_peer_delete(arvif->ar, arvif->vdev_id,
|
|
vif->addr);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to submit AP/IBSS self-peer removal on vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
|
|
kfree(arvif->u.ap.noa_data);
|
|
}
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %i delete (remove interface)\n",
|
|
arvif->vdev_id);
|
|
|
|
ret = ath10k_wmi_vdev_delete(ar, arvif->vdev_id);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to delete WMI vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
|
|
/* Some firmware revisions don't notify host about self-peer removal
|
|
* until after associated vdev is deleted.
|
|
*/
|
|
if (arvif->vdev_type == WMI_VDEV_TYPE_AP ||
|
|
arvif->vdev_type == WMI_VDEV_TYPE_IBSS) {
|
|
ret = ath10k_wait_for_peer_deleted(ar, arvif->vdev_id,
|
|
vif->addr);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to remove AP self-peer on vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
ar->num_peers--;
|
|
spin_unlock_bh(&ar->data_lock);
|
|
}
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
for (i = 0; i < ARRAY_SIZE(ar->peer_map); i++) {
|
|
peer = ar->peer_map[i];
|
|
if (!peer)
|
|
continue;
|
|
|
|
if (peer->vif == vif) {
|
|
ath10k_warn(ar, "found vif peer %pM entry on vdev %i after it was supposedly removed\n",
|
|
vif->addr, arvif->vdev_id);
|
|
peer->vif = NULL;
|
|
}
|
|
}
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
ath10k_peer_cleanup(ar, arvif->vdev_id);
|
|
ath10k_mac_txq_unref(ar, vif->txq);
|
|
|
|
if (vif->type == NL80211_IFTYPE_MONITOR) {
|
|
ar->monitor_arvif = NULL;
|
|
ret = ath10k_monitor_recalc(ar);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to recalc monitor: %d\n", ret);
|
|
}
|
|
|
|
ret = ath10k_mac_txpower_recalc(ar);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to recalc tx power: %d\n", ret);
|
|
|
|
spin_lock_bh(&ar->htt.tx_lock);
|
|
ath10k_mac_vif_tx_unlock_all(arvif);
|
|
spin_unlock_bh(&ar->htt.tx_lock);
|
|
|
|
ath10k_mac_txq_unref(ar, vif->txq);
|
|
|
|
mutex_unlock(&ar->conf_mutex);
|
|
}
|
|
|
|
/*
|
|
* FIXME: Has to be verified.
|
|
*/
|
|
#define SUPPORTED_FILTERS \
|
|
(FIF_ALLMULTI | \
|
|
FIF_CONTROL | \
|
|
FIF_PSPOLL | \
|
|
FIF_OTHER_BSS | \
|
|
FIF_BCN_PRBRESP_PROMISC | \
|
|
FIF_PROBE_REQ | \
|
|
FIF_FCSFAIL)
|
|
|
|
static void ath10k_configure_filter(struct ieee80211_hw *hw,
|
|
unsigned int changed_flags,
|
|
unsigned int *total_flags,
|
|
u64 multicast)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
int ret;
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
|
|
changed_flags &= SUPPORTED_FILTERS;
|
|
*total_flags &= SUPPORTED_FILTERS;
|
|
ar->filter_flags = *total_flags;
|
|
|
|
ret = ath10k_monitor_recalc(ar);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to recalc monitor: %d\n", ret);
|
|
|
|
mutex_unlock(&ar->conf_mutex);
|
|
}
|
|
|
|
static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
|
|
struct ieee80211_vif *vif,
|
|
struct ieee80211_bss_conf *info,
|
|
u32 changed)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
int ret = 0;
|
|
u32 vdev_param, pdev_param, slottime, preamble;
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
|
|
if (changed & BSS_CHANGED_IBSS)
|
|
ath10k_control_ibss(arvif, info, vif->addr);
|
|
|
|
if (changed & BSS_CHANGED_BEACON_INT) {
|
|
arvif->beacon_interval = info->beacon_int;
|
|
vdev_param = ar->wmi.vdev_param->beacon_interval;
|
|
ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
|
|
arvif->beacon_interval);
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC,
|
|
"mac vdev %d beacon_interval %d\n",
|
|
arvif->vdev_id, arvif->beacon_interval);
|
|
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to set beacon interval for vdev %d: %i\n",
|
|
arvif->vdev_id, ret);
|
|
}
|
|
|
|
if (changed & BSS_CHANGED_BEACON) {
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC,
|
|
"vdev %d set beacon tx mode to staggered\n",
|
|
arvif->vdev_id);
|
|
|
|
pdev_param = ar->wmi.pdev_param->beacon_tx_mode;
|
|
ret = ath10k_wmi_pdev_set_param(ar, pdev_param,
|
|
WMI_BEACON_STAGGERED_MODE);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to set beacon mode for vdev %d: %i\n",
|
|
arvif->vdev_id, ret);
|
|
|
|
ret = ath10k_mac_setup_bcn_tmpl(arvif);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to update beacon template: %d\n",
|
|
ret);
|
|
|
|
if (ieee80211_vif_is_mesh(vif)) {
|
|
/* mesh doesn't use SSID but firmware needs it */
|
|
strncpy(arvif->u.ap.ssid, "mesh",
|
|
sizeof(arvif->u.ap.ssid));
|
|
arvif->u.ap.ssid_len = 4;
|
|
}
|
|
}
|
|
|
|
if (changed & BSS_CHANGED_AP_PROBE_RESP) {
|
|
ret = ath10k_mac_setup_prb_tmpl(arvif);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to setup probe resp template on vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
}
|
|
|
|
if (changed & (BSS_CHANGED_BEACON_INFO | BSS_CHANGED_BEACON)) {
|
|
arvif->dtim_period = info->dtim_period;
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC,
|
|
"mac vdev %d dtim_period %d\n",
|
|
arvif->vdev_id, arvif->dtim_period);
|
|
|
|
vdev_param = ar->wmi.vdev_param->dtim_period;
|
|
ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
|
|
arvif->dtim_period);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to set dtim period for vdev %d: %i\n",
|
|
arvif->vdev_id, ret);
|
|
}
|
|
|
|
if (changed & BSS_CHANGED_SSID &&
|
|
vif->type == NL80211_IFTYPE_AP) {
|
|
arvif->u.ap.ssid_len = info->ssid_len;
|
|
if (info->ssid_len)
|
|
memcpy(arvif->u.ap.ssid, info->ssid, info->ssid_len);
|
|
arvif->u.ap.hidden_ssid = info->hidden_ssid;
|
|
}
|
|
|
|
if (changed & BSS_CHANGED_BSSID && !is_zero_ether_addr(info->bssid))
|
|
ether_addr_copy(arvif->bssid, info->bssid);
|
|
|
|
if (changed & BSS_CHANGED_BEACON_ENABLED)
|
|
ath10k_control_beaconing(arvif, info);
|
|
|
|
if (changed & BSS_CHANGED_ERP_CTS_PROT) {
|
|
arvif->use_cts_prot = info->use_cts_prot;
|
|
|
|
ret = ath10k_recalc_rtscts_prot(arvif);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to recalculate rts/cts prot for vdev %d: %d\n",
|
|
arvif->vdev_id, ret);
|
|
|
|
if (ath10k_mac_can_set_cts_prot(arvif)) {
|
|
ret = ath10k_mac_set_cts_prot(arvif);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to set cts protection for vdev %d: %d\n",
|
|
arvif->vdev_id, ret);
|
|
}
|
|
}
|
|
|
|
if (changed & BSS_CHANGED_ERP_SLOT) {
|
|
if (info->use_short_slot)
|
|
slottime = WMI_VDEV_SLOT_TIME_SHORT; /* 9us */
|
|
|
|
else
|
|
slottime = WMI_VDEV_SLOT_TIME_LONG; /* 20us */
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d slot_time %d\n",
|
|
arvif->vdev_id, slottime);
|
|
|
|
vdev_param = ar->wmi.vdev_param->slot_time;
|
|
ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
|
|
slottime);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to set erp slot for vdev %d: %i\n",
|
|
arvif->vdev_id, ret);
|
|
}
|
|
|
|
if (changed & BSS_CHANGED_ERP_PREAMBLE) {
|
|
if (info->use_short_preamble)
|
|
preamble = WMI_VDEV_PREAMBLE_SHORT;
|
|
else
|
|
preamble = WMI_VDEV_PREAMBLE_LONG;
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC,
|
|
"mac vdev %d preamble %dn",
|
|
arvif->vdev_id, preamble);
|
|
|
|
vdev_param = ar->wmi.vdev_param->preamble;
|
|
ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
|
|
preamble);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to set preamble for vdev %d: %i\n",
|
|
arvif->vdev_id, ret);
|
|
}
|
|
|
|
if (changed & BSS_CHANGED_ASSOC) {
|
|
if (info->assoc) {
|
|
/* Workaround: Make sure monitor vdev is not running
|
|
* when associating to prevent some firmware revisions
|
|
* (e.g. 10.1 and 10.2) from crashing.
|
|
*/
|
|
if (ar->monitor_started)
|
|
ath10k_monitor_stop(ar);
|
|
ath10k_bss_assoc(hw, vif, info);
|
|
ath10k_monitor_recalc(ar);
|
|
} else {
|
|
ath10k_bss_disassoc(hw, vif);
|
|
}
|
|
}
|
|
|
|
if (changed & BSS_CHANGED_TXPOWER) {
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev_id %i txpower %d\n",
|
|
arvif->vdev_id, info->txpower);
|
|
|
|
arvif->txpower = info->txpower;
|
|
ret = ath10k_mac_txpower_recalc(ar);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to recalc tx power: %d\n", ret);
|
|
}
|
|
|
|
if (changed & BSS_CHANGED_PS) {
|
|
arvif->ps = vif->bss_conf.ps;
|
|
|
|
ret = ath10k_config_ps(ar);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to setup ps on vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
}
|
|
|
|
mutex_unlock(&ar->conf_mutex);
|
|
}
|
|
|
|
static void ath10k_mac_op_set_coverage_class(struct ieee80211_hw *hw, s16 value)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
|
|
/* This function should never be called if setting the coverage class
|
|
* is not supported on this hardware.
|
|
*/
|
|
if (!ar->hw_params.hw_ops->set_coverage_class) {
|
|
WARN_ON_ONCE(1);
|
|
return;
|
|
}
|
|
ar->hw_params.hw_ops->set_coverage_class(ar, value);
|
|
}
|
|
|
|
struct ath10k_mac_tdls_iter_data {
|
|
u32 num_tdls_stations;
|
|
struct ieee80211_vif *curr_vif;
|
|
};
|
|
|
|
static void ath10k_mac_tdls_vif_stations_count_iter(void *data,
|
|
struct ieee80211_sta *sta)
|
|
{
|
|
struct ath10k_mac_tdls_iter_data *iter_data = data;
|
|
struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
|
|
struct ieee80211_vif *sta_vif = arsta->arvif->vif;
|
|
|
|
if (sta->tdls && sta_vif == iter_data->curr_vif)
|
|
iter_data->num_tdls_stations++;
|
|
}
|
|
|
|
static int ath10k_mac_tdls_vif_stations_count(struct ieee80211_hw *hw,
|
|
struct ieee80211_vif *vif)
|
|
{
|
|
struct ath10k_mac_tdls_iter_data data = {};
|
|
|
|
data.curr_vif = vif;
|
|
|
|
ieee80211_iterate_stations_atomic(hw,
|
|
ath10k_mac_tdls_vif_stations_count_iter,
|
|
&data);
|
|
return data.num_tdls_stations;
|
|
}
|
|
|
|
static void ath10k_mac_tdls_vifs_count_iter(void *data, u8 *mac,
|
|
struct ieee80211_vif *vif)
|
|
{
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
int *num_tdls_vifs = data;
|
|
|
|
if (vif->type != NL80211_IFTYPE_STATION)
|
|
return;
|
|
|
|
if (ath10k_mac_tdls_vif_stations_count(arvif->ar->hw, vif) > 0)
|
|
(*num_tdls_vifs)++;
|
|
}
|
|
|
|
static int ath10k_mac_tdls_vifs_count(struct ieee80211_hw *hw)
|
|
{
|
|
int num_tdls_vifs = 0;
|
|
|
|
ieee80211_iterate_active_interfaces_atomic(hw,
|
|
IEEE80211_IFACE_ITER_NORMAL,
|
|
ath10k_mac_tdls_vifs_count_iter,
|
|
&num_tdls_vifs);
|
|
return num_tdls_vifs;
|
|
}
|
|
|
|
static int ath10k_hw_scan(struct ieee80211_hw *hw,
|
|
struct ieee80211_vif *vif,
|
|
struct ieee80211_scan_request *hw_req)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
struct cfg80211_scan_request *req = &hw_req->req;
|
|
struct wmi_start_scan_arg arg;
|
|
int ret = 0;
|
|
int i;
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
|
|
if (ath10k_mac_tdls_vif_stations_count(hw, vif) > 0) {
|
|
ret = -EBUSY;
|
|
goto exit;
|
|
}
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
switch (ar->scan.state) {
|
|
case ATH10K_SCAN_IDLE:
|
|
reinit_completion(&ar->scan.started);
|
|
reinit_completion(&ar->scan.completed);
|
|
ar->scan.state = ATH10K_SCAN_STARTING;
|
|
ar->scan.is_roc = false;
|
|
ar->scan.vdev_id = arvif->vdev_id;
|
|
ret = 0;
|
|
break;
|
|
case ATH10K_SCAN_STARTING:
|
|
case ATH10K_SCAN_RUNNING:
|
|
case ATH10K_SCAN_ABORTING:
|
|
ret = -EBUSY;
|
|
break;
|
|
}
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
if (ret)
|
|
goto exit;
|
|
|
|
memset(&arg, 0, sizeof(arg));
|
|
ath10k_wmi_start_scan_init(ar, &arg);
|
|
arg.vdev_id = arvif->vdev_id;
|
|
arg.scan_id = ATH10K_SCAN_ID;
|
|
|
|
if (req->ie_len) {
|
|
arg.ie_len = req->ie_len;
|
|
memcpy(arg.ie, req->ie, arg.ie_len);
|
|
}
|
|
|
|
if (req->n_ssids) {
|
|
arg.n_ssids = req->n_ssids;
|
|
for (i = 0; i < arg.n_ssids; i++) {
|
|
arg.ssids[i].len = req->ssids[i].ssid_len;
|
|
arg.ssids[i].ssid = req->ssids[i].ssid;
|
|
}
|
|
} else {
|
|
arg.scan_ctrl_flags |= WMI_SCAN_FLAG_PASSIVE;
|
|
}
|
|
|
|
if (req->flags & NL80211_SCAN_FLAG_RANDOM_ADDR) {
|
|
arg.scan_ctrl_flags |= WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ;
|
|
ether_addr_copy(arg.mac_addr.addr, req->mac_addr);
|
|
ether_addr_copy(arg.mac_mask.addr, req->mac_addr_mask);
|
|
}
|
|
|
|
if (req->n_channels) {
|
|
arg.n_channels = req->n_channels;
|
|
for (i = 0; i < arg.n_channels; i++)
|
|
arg.channels[i] = req->channels[i]->center_freq;
|
|
}
|
|
|
|
ret = ath10k_start_scan(ar, &arg);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to start hw scan: %d\n", ret);
|
|
spin_lock_bh(&ar->data_lock);
|
|
ar->scan.state = ATH10K_SCAN_IDLE;
|
|
spin_unlock_bh(&ar->data_lock);
|
|
}
|
|
|
|
/* Add a 200ms margin to account for event/command processing */
|
|
ieee80211_queue_delayed_work(ar->hw, &ar->scan.timeout,
|
|
msecs_to_jiffies(arg.max_scan_time +
|
|
200));
|
|
|
|
exit:
|
|
mutex_unlock(&ar->conf_mutex);
|
|
return ret;
|
|
}
|
|
|
|
static void ath10k_cancel_hw_scan(struct ieee80211_hw *hw,
|
|
struct ieee80211_vif *vif)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
ath10k_scan_abort(ar);
|
|
mutex_unlock(&ar->conf_mutex);
|
|
|
|
cancel_delayed_work_sync(&ar->scan.timeout);
|
|
}
|
|
|
|
static void ath10k_set_key_h_def_keyidx(struct ath10k *ar,
|
|
struct ath10k_vif *arvif,
|
|
enum set_key_cmd cmd,
|
|
struct ieee80211_key_conf *key)
|
|
{
|
|
u32 vdev_param = arvif->ar->wmi.vdev_param->def_keyid;
|
|
int ret;
|
|
|
|
/* 10.1 firmware branch requires default key index to be set to group
|
|
* key index after installing it. Otherwise FW/HW Txes corrupted
|
|
* frames with multi-vif APs. This is not required for main firmware
|
|
* branch (e.g. 636).
|
|
*
|
|
* This is also needed for 636 fw for IBSS-RSN to work more reliably.
|
|
*
|
|
* FIXME: It remains unknown if this is required for multi-vif STA
|
|
* interfaces on 10.1.
|
|
*/
|
|
|
|
if (arvif->vdev_type != WMI_VDEV_TYPE_AP &&
|
|
arvif->vdev_type != WMI_VDEV_TYPE_IBSS)
|
|
return;
|
|
|
|
if (key->cipher == WLAN_CIPHER_SUITE_WEP40)
|
|
return;
|
|
|
|
if (key->cipher == WLAN_CIPHER_SUITE_WEP104)
|
|
return;
|
|
|
|
if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE)
|
|
return;
|
|
|
|
if (cmd != SET_KEY)
|
|
return;
|
|
|
|
ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
|
|
key->keyidx);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to set vdev %i group key as default key: %d\n",
|
|
arvif->vdev_id, ret);
|
|
}
|
|
|
|
static int ath10k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
|
|
struct ieee80211_vif *vif, struct ieee80211_sta *sta,
|
|
struct ieee80211_key_conf *key)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
struct ath10k_peer *peer;
|
|
const u8 *peer_addr;
|
|
bool is_wep = key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
|
|
key->cipher == WLAN_CIPHER_SUITE_WEP104;
|
|
int ret = 0;
|
|
int ret2;
|
|
u32 flags = 0;
|
|
u32 flags2;
|
|
|
|
/* this one needs to be done in software */
|
|
if (key->cipher == WLAN_CIPHER_SUITE_AES_CMAC ||
|
|
key->cipher == WLAN_CIPHER_SUITE_BIP_GMAC_128 ||
|
|
key->cipher == WLAN_CIPHER_SUITE_BIP_GMAC_256 ||
|
|
key->cipher == WLAN_CIPHER_SUITE_BIP_CMAC_256)
|
|
return 1;
|
|
|
|
if (arvif->nohwcrypt)
|
|
return 1;
|
|
|
|
if (key->keyidx > WMI_MAX_KEY_INDEX)
|
|
return -ENOSPC;
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
|
|
if (sta)
|
|
peer_addr = sta->addr;
|
|
else if (arvif->vdev_type == WMI_VDEV_TYPE_STA)
|
|
peer_addr = vif->bss_conf.bssid;
|
|
else
|
|
peer_addr = vif->addr;
|
|
|
|
key->hw_key_idx = key->keyidx;
|
|
|
|
if (is_wep) {
|
|
if (cmd == SET_KEY)
|
|
arvif->wep_keys[key->keyidx] = key;
|
|
else
|
|
arvif->wep_keys[key->keyidx] = NULL;
|
|
}
|
|
|
|
/* the peer should not disappear in mid-way (unless FW goes awry) since
|
|
* we already hold conf_mutex. we just make sure its there now.
|
|
*/
|
|
spin_lock_bh(&ar->data_lock);
|
|
peer = ath10k_peer_find(ar, arvif->vdev_id, peer_addr);
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
if (!peer) {
|
|
if (cmd == SET_KEY) {
|
|
ath10k_warn(ar, "failed to install key for non-existent peer %pM\n",
|
|
peer_addr);
|
|
ret = -EOPNOTSUPP;
|
|
goto exit;
|
|
} else {
|
|
/* if the peer doesn't exist there is no key to disable anymore */
|
|
goto exit;
|
|
}
|
|
}
|
|
|
|
if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE)
|
|
flags |= WMI_KEY_PAIRWISE;
|
|
else
|
|
flags |= WMI_KEY_GROUP;
|
|
|
|
if (is_wep) {
|
|
if (cmd == DISABLE_KEY)
|
|
ath10k_clear_vdev_key(arvif, key);
|
|
|
|
/* When WEP keys are uploaded it's possible that there are
|
|
* stations associated already (e.g. when merging) without any
|
|
* keys. Static WEP needs an explicit per-peer key upload.
|
|
*/
|
|
if (vif->type == NL80211_IFTYPE_ADHOC &&
|
|
cmd == SET_KEY)
|
|
ath10k_mac_vif_update_wep_key(arvif, key);
|
|
|
|
/* 802.1x never sets the def_wep_key_idx so each set_key()
|
|
* call changes default tx key.
|
|
*
|
|
* Static WEP sets def_wep_key_idx via .set_default_unicast_key
|
|
* after first set_key().
|
|
*/
|
|
if (cmd == SET_KEY && arvif->def_wep_key_idx == -1)
|
|
flags |= WMI_KEY_TX_USAGE;
|
|
}
|
|
|
|
ret = ath10k_install_key(arvif, key, cmd, peer_addr, flags);
|
|
if (ret) {
|
|
WARN_ON(ret > 0);
|
|
ath10k_warn(ar, "failed to install key for vdev %i peer %pM: %d\n",
|
|
arvif->vdev_id, peer_addr, ret);
|
|
goto exit;
|
|
}
|
|
|
|
/* mac80211 sets static WEP keys as groupwise while firmware requires
|
|
* them to be installed twice as both pairwise and groupwise.
|
|
*/
|
|
if (is_wep && !sta && vif->type == NL80211_IFTYPE_STATION) {
|
|
flags2 = flags;
|
|
flags2 &= ~WMI_KEY_GROUP;
|
|
flags2 |= WMI_KEY_PAIRWISE;
|
|
|
|
ret = ath10k_install_key(arvif, key, cmd, peer_addr, flags2);
|
|
if (ret) {
|
|
WARN_ON(ret > 0);
|
|
ath10k_warn(ar, "failed to install (ucast) key for vdev %i peer %pM: %d\n",
|
|
arvif->vdev_id, peer_addr, ret);
|
|
ret2 = ath10k_install_key(arvif, key, DISABLE_KEY,
|
|
peer_addr, flags);
|
|
if (ret2) {
|
|
WARN_ON(ret2 > 0);
|
|
ath10k_warn(ar, "failed to disable (mcast) key for vdev %i peer %pM: %d\n",
|
|
arvif->vdev_id, peer_addr, ret2);
|
|
}
|
|
goto exit;
|
|
}
|
|
}
|
|
|
|
ath10k_set_key_h_def_keyidx(ar, arvif, cmd, key);
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
peer = ath10k_peer_find(ar, arvif->vdev_id, peer_addr);
|
|
if (peer && cmd == SET_KEY)
|
|
peer->keys[key->keyidx] = key;
|
|
else if (peer && cmd == DISABLE_KEY)
|
|
peer->keys[key->keyidx] = NULL;
|
|
else if (peer == NULL)
|
|
/* impossible unless FW goes crazy */
|
|
ath10k_warn(ar, "Peer %pM disappeared!\n", peer_addr);
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
if (sta && sta->tdls)
|
|
ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr,
|
|
WMI_PEER_AUTHORIZE, 1);
|
|
|
|
exit:
|
|
mutex_unlock(&ar->conf_mutex);
|
|
return ret;
|
|
}
|
|
|
|
static void ath10k_set_default_unicast_key(struct ieee80211_hw *hw,
|
|
struct ieee80211_vif *vif,
|
|
int keyidx)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
int ret;
|
|
|
|
mutex_lock(&arvif->ar->conf_mutex);
|
|
|
|
if (arvif->ar->state != ATH10K_STATE_ON)
|
|
goto unlock;
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d set keyidx %d\n",
|
|
arvif->vdev_id, keyidx);
|
|
|
|
ret = ath10k_wmi_vdev_set_param(arvif->ar,
|
|
arvif->vdev_id,
|
|
arvif->ar->wmi.vdev_param->def_keyid,
|
|
keyidx);
|
|
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to update wep key index for vdev %d: %d\n",
|
|
arvif->vdev_id,
|
|
ret);
|
|
goto unlock;
|
|
}
|
|
|
|
arvif->def_wep_key_idx = keyidx;
|
|
|
|
unlock:
|
|
mutex_unlock(&arvif->ar->conf_mutex);
|
|
}
|
|
|
|
static void ath10k_sta_rc_update_wk(struct work_struct *wk)
|
|
{
|
|
struct ath10k *ar;
|
|
struct ath10k_vif *arvif;
|
|
struct ath10k_sta *arsta;
|
|
struct ieee80211_sta *sta;
|
|
struct cfg80211_chan_def def;
|
|
enum nl80211_band band;
|
|
const u8 *ht_mcs_mask;
|
|
const u16 *vht_mcs_mask;
|
|
u32 changed, bw, nss, smps;
|
|
int err;
|
|
|
|
arsta = container_of(wk, struct ath10k_sta, update_wk);
|
|
sta = container_of((void *)arsta, struct ieee80211_sta, drv_priv);
|
|
arvif = arsta->arvif;
|
|
ar = arvif->ar;
|
|
|
|
if (WARN_ON(ath10k_mac_vif_chan(arvif->vif, &def)))
|
|
return;
|
|
|
|
band = def.chan->band;
|
|
ht_mcs_mask = arvif->bitrate_mask.control[band].ht_mcs;
|
|
vht_mcs_mask = arvif->bitrate_mask.control[band].vht_mcs;
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
|
|
changed = arsta->changed;
|
|
arsta->changed = 0;
|
|
|
|
bw = arsta->bw;
|
|
nss = arsta->nss;
|
|
smps = arsta->smps;
|
|
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
|
|
nss = max_t(u32, 1, nss);
|
|
nss = min(nss, max(ath10k_mac_max_ht_nss(ht_mcs_mask),
|
|
ath10k_mac_max_vht_nss(vht_mcs_mask)));
|
|
|
|
if (changed & IEEE80211_RC_BW_CHANGED) {
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM peer bw %d\n",
|
|
sta->addr, bw);
|
|
|
|
err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr,
|
|
WMI_PEER_CHAN_WIDTH, bw);
|
|
if (err)
|
|
ath10k_warn(ar, "failed to update STA %pM peer bw %d: %d\n",
|
|
sta->addr, bw, err);
|
|
}
|
|
|
|
if (changed & IEEE80211_RC_NSS_CHANGED) {
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM nss %d\n",
|
|
sta->addr, nss);
|
|
|
|
err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr,
|
|
WMI_PEER_NSS, nss);
|
|
if (err)
|
|
ath10k_warn(ar, "failed to update STA %pM nss %d: %d\n",
|
|
sta->addr, nss, err);
|
|
}
|
|
|
|
if (changed & IEEE80211_RC_SMPS_CHANGED) {
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM smps %d\n",
|
|
sta->addr, smps);
|
|
|
|
err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr,
|
|
WMI_PEER_SMPS_STATE, smps);
|
|
if (err)
|
|
ath10k_warn(ar, "failed to update STA %pM smps %d: %d\n",
|
|
sta->addr, smps, err);
|
|
}
|
|
|
|
if (changed & IEEE80211_RC_SUPP_RATES_CHANGED) {
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM supp rates\n",
|
|
sta->addr);
|
|
|
|
err = ath10k_station_assoc(ar, arvif->vif, sta, true);
|
|
if (err)
|
|
ath10k_warn(ar, "failed to reassociate station: %pM\n",
|
|
sta->addr);
|
|
}
|
|
|
|
mutex_unlock(&ar->conf_mutex);
|
|
}
|
|
|
|
static int ath10k_mac_inc_num_stations(struct ath10k_vif *arvif,
|
|
struct ieee80211_sta *sta)
|
|
{
|
|
struct ath10k *ar = arvif->ar;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
if (arvif->vdev_type == WMI_VDEV_TYPE_STA && !sta->tdls)
|
|
return 0;
|
|
|
|
if (ar->num_stations >= ar->max_num_stations)
|
|
return -ENOBUFS;
|
|
|
|
ar->num_stations++;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ath10k_mac_dec_num_stations(struct ath10k_vif *arvif,
|
|
struct ieee80211_sta *sta)
|
|
{
|
|
struct ath10k *ar = arvif->ar;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
if (arvif->vdev_type == WMI_VDEV_TYPE_STA && !sta->tdls)
|
|
return;
|
|
|
|
ar->num_stations--;
|
|
}
|
|
|
|
static int ath10k_sta_state(struct ieee80211_hw *hw,
|
|
struct ieee80211_vif *vif,
|
|
struct ieee80211_sta *sta,
|
|
enum ieee80211_sta_state old_state,
|
|
enum ieee80211_sta_state new_state)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
|
|
struct ath10k_peer *peer;
|
|
int ret = 0;
|
|
int i;
|
|
|
|
if (old_state == IEEE80211_STA_NOTEXIST &&
|
|
new_state == IEEE80211_STA_NONE) {
|
|
memset(arsta, 0, sizeof(*arsta));
|
|
arsta->arvif = arvif;
|
|
INIT_WORK(&arsta->update_wk, ath10k_sta_rc_update_wk);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(sta->txq); i++)
|
|
ath10k_mac_txq_init(sta->txq[i]);
|
|
}
|
|
|
|
/* cancel must be done outside the mutex to avoid deadlock */
|
|
if ((old_state == IEEE80211_STA_NONE &&
|
|
new_state == IEEE80211_STA_NOTEXIST))
|
|
cancel_work_sync(&arsta->update_wk);
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
|
|
if (old_state == IEEE80211_STA_NOTEXIST &&
|
|
new_state == IEEE80211_STA_NONE) {
|
|
/*
|
|
* New station addition.
|
|
*/
|
|
enum wmi_peer_type peer_type = WMI_PEER_TYPE_DEFAULT;
|
|
u32 num_tdls_stations;
|
|
u32 num_tdls_vifs;
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC,
|
|
"mac vdev %d peer create %pM (new sta) sta %d / %d peer %d / %d\n",
|
|
arvif->vdev_id, sta->addr,
|
|
ar->num_stations + 1, ar->max_num_stations,
|
|
ar->num_peers + 1, ar->max_num_peers);
|
|
|
|
num_tdls_stations = ath10k_mac_tdls_vif_stations_count(hw, vif);
|
|
num_tdls_vifs = ath10k_mac_tdls_vifs_count(hw);
|
|
|
|
if (sta->tdls) {
|
|
if (num_tdls_stations >= ar->max_num_tdls_vdevs) {
|
|
ath10k_warn(ar, "vdev %i exceeded maximum number of tdls vdevs %i\n",
|
|
arvif->vdev_id,
|
|
ar->max_num_tdls_vdevs);
|
|
ret = -ELNRNG;
|
|
goto exit;
|
|
}
|
|
peer_type = WMI_PEER_TYPE_TDLS;
|
|
}
|
|
|
|
ret = ath10k_mac_inc_num_stations(arvif, sta);
|
|
if (ret) {
|
|
ath10k_warn(ar, "refusing to associate station: too many connected already (%d)\n",
|
|
ar->max_num_stations);
|
|
goto exit;
|
|
}
|
|
|
|
ret = ath10k_peer_create(ar, vif, sta, arvif->vdev_id,
|
|
sta->addr, peer_type);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to add peer %pM for vdev %d when adding a new sta: %i\n",
|
|
sta->addr, arvif->vdev_id, ret);
|
|
ath10k_mac_dec_num_stations(arvif, sta);
|
|
goto exit;
|
|
}
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
|
|
peer = ath10k_peer_find(ar, arvif->vdev_id, sta->addr);
|
|
if (!peer) {
|
|
ath10k_warn(ar, "failed to lookup peer %pM on vdev %i\n",
|
|
vif->addr, arvif->vdev_id);
|
|
spin_unlock_bh(&ar->data_lock);
|
|
ath10k_peer_delete(ar, arvif->vdev_id, sta->addr);
|
|
ath10k_mac_dec_num_stations(arvif, sta);
|
|
ret = -ENOENT;
|
|
goto exit;
|
|
}
|
|
|
|
arsta->peer_id = find_first_bit(peer->peer_ids,
|
|
ATH10K_MAX_NUM_PEER_IDS);
|
|
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
if (!sta->tdls)
|
|
goto exit;
|
|
|
|
ret = ath10k_wmi_update_fw_tdls_state(ar, arvif->vdev_id,
|
|
WMI_TDLS_ENABLE_ACTIVE);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to update fw tdls state on vdev %i: %i\n",
|
|
arvif->vdev_id, ret);
|
|
ath10k_peer_delete(ar, arvif->vdev_id,
|
|
sta->addr);
|
|
ath10k_mac_dec_num_stations(arvif, sta);
|
|
goto exit;
|
|
}
|
|
|
|
ret = ath10k_mac_tdls_peer_update(ar, arvif->vdev_id, sta,
|
|
WMI_TDLS_PEER_STATE_PEERING);
|
|
if (ret) {
|
|
ath10k_warn(ar,
|
|
"failed to update tdls peer %pM for vdev %d when adding a new sta: %i\n",
|
|
sta->addr, arvif->vdev_id, ret);
|
|
ath10k_peer_delete(ar, arvif->vdev_id, sta->addr);
|
|
ath10k_mac_dec_num_stations(arvif, sta);
|
|
|
|
if (num_tdls_stations != 0)
|
|
goto exit;
|
|
ath10k_wmi_update_fw_tdls_state(ar, arvif->vdev_id,
|
|
WMI_TDLS_DISABLE);
|
|
}
|
|
} else if ((old_state == IEEE80211_STA_NONE &&
|
|
new_state == IEEE80211_STA_NOTEXIST)) {
|
|
/*
|
|
* Existing station deletion.
|
|
*/
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC,
|
|
"mac vdev %d peer delete %pM sta %pK (sta gone)\n",
|
|
arvif->vdev_id, sta->addr, sta);
|
|
|
|
if (sta->tdls) {
|
|
ret = ath10k_mac_tdls_peer_update(ar, arvif->vdev_id,
|
|
sta,
|
|
WMI_TDLS_PEER_STATE_TEARDOWN);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to update tdls peer state for %pM state %d: %i\n",
|
|
sta->addr,
|
|
WMI_TDLS_PEER_STATE_TEARDOWN, ret);
|
|
}
|
|
|
|
ret = ath10k_peer_delete(ar, arvif->vdev_id, sta->addr);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to delete peer %pM for vdev %d: %i\n",
|
|
sta->addr, arvif->vdev_id, ret);
|
|
|
|
ath10k_mac_dec_num_stations(arvif, sta);
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
for (i = 0; i < ARRAY_SIZE(ar->peer_map); i++) {
|
|
peer = ar->peer_map[i];
|
|
if (!peer)
|
|
continue;
|
|
|
|
if (peer->sta == sta) {
|
|
ath10k_warn(ar, "found sta peer %pM (ptr %pK id %d) entry on vdev %i after it was supposedly removed\n",
|
|
sta->addr, peer, i, arvif->vdev_id);
|
|
peer->sta = NULL;
|
|
|
|
/* Clean up the peer object as well since we
|
|
* must have failed to do this above.
|
|
*/
|
|
list_del(&peer->list);
|
|
ar->peer_map[i] = NULL;
|
|
kfree(peer);
|
|
ar->num_peers--;
|
|
}
|
|
}
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(sta->txq); i++)
|
|
ath10k_mac_txq_unref(ar, sta->txq[i]);
|
|
|
|
if (!sta->tdls)
|
|
goto exit;
|
|
|
|
if (ath10k_mac_tdls_vif_stations_count(hw, vif))
|
|
goto exit;
|
|
|
|
/* This was the last tdls peer in current vif */
|
|
ret = ath10k_wmi_update_fw_tdls_state(ar, arvif->vdev_id,
|
|
WMI_TDLS_DISABLE);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to update fw tdls state on vdev %i: %i\n",
|
|
arvif->vdev_id, ret);
|
|
}
|
|
} else if (old_state == IEEE80211_STA_AUTH &&
|
|
new_state == IEEE80211_STA_ASSOC &&
|
|
(vif->type == NL80211_IFTYPE_AP ||
|
|
vif->type == NL80211_IFTYPE_MESH_POINT ||
|
|
vif->type == NL80211_IFTYPE_ADHOC)) {
|
|
/*
|
|
* New association.
|
|
*/
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac sta %pM associated\n",
|
|
sta->addr);
|
|
|
|
ret = ath10k_station_assoc(ar, vif, sta, false);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to associate station %pM for vdev %i: %i\n",
|
|
sta->addr, arvif->vdev_id, ret);
|
|
} else if (old_state == IEEE80211_STA_ASSOC &&
|
|
new_state == IEEE80211_STA_AUTHORIZED &&
|
|
sta->tdls) {
|
|
/*
|
|
* Tdls station authorized.
|
|
*/
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac tdls sta %pM authorized\n",
|
|
sta->addr);
|
|
|
|
ret = ath10k_station_assoc(ar, vif, sta, false);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to associate tdls station %pM for vdev %i: %i\n",
|
|
sta->addr, arvif->vdev_id, ret);
|
|
goto exit;
|
|
}
|
|
|
|
ret = ath10k_mac_tdls_peer_update(ar, arvif->vdev_id, sta,
|
|
WMI_TDLS_PEER_STATE_CONNECTED);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to update tdls peer %pM for vdev %i: %i\n",
|
|
sta->addr, arvif->vdev_id, ret);
|
|
} else if (old_state == IEEE80211_STA_ASSOC &&
|
|
new_state == IEEE80211_STA_AUTH &&
|
|
(vif->type == NL80211_IFTYPE_AP ||
|
|
vif->type == NL80211_IFTYPE_MESH_POINT ||
|
|
vif->type == NL80211_IFTYPE_ADHOC)) {
|
|
/*
|
|
* Disassociation.
|
|
*/
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac sta %pM disassociated\n",
|
|
sta->addr);
|
|
|
|
ret = ath10k_station_disassoc(ar, vif, sta);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to disassociate station: %pM vdev %i: %i\n",
|
|
sta->addr, arvif->vdev_id, ret);
|
|
}
|
|
exit:
|
|
mutex_unlock(&ar->conf_mutex);
|
|
return ret;
|
|
}
|
|
|
|
static int ath10k_conf_tx_uapsd(struct ath10k *ar, struct ieee80211_vif *vif,
|
|
u16 ac, bool enable)
|
|
{
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
struct wmi_sta_uapsd_auto_trig_arg arg = {};
|
|
u32 prio = 0, acc = 0;
|
|
u32 value = 0;
|
|
int ret = 0;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
if (arvif->vdev_type != WMI_VDEV_TYPE_STA)
|
|
return 0;
|
|
|
|
switch (ac) {
|
|
case IEEE80211_AC_VO:
|
|
value = WMI_STA_PS_UAPSD_AC3_DELIVERY_EN |
|
|
WMI_STA_PS_UAPSD_AC3_TRIGGER_EN;
|
|
prio = 7;
|
|
acc = 3;
|
|
break;
|
|
case IEEE80211_AC_VI:
|
|
value = WMI_STA_PS_UAPSD_AC2_DELIVERY_EN |
|
|
WMI_STA_PS_UAPSD_AC2_TRIGGER_EN;
|
|
prio = 5;
|
|
acc = 2;
|
|
break;
|
|
case IEEE80211_AC_BE:
|
|
value = WMI_STA_PS_UAPSD_AC1_DELIVERY_EN |
|
|
WMI_STA_PS_UAPSD_AC1_TRIGGER_EN;
|
|
prio = 2;
|
|
acc = 1;
|
|
break;
|
|
case IEEE80211_AC_BK:
|
|
value = WMI_STA_PS_UAPSD_AC0_DELIVERY_EN |
|
|
WMI_STA_PS_UAPSD_AC0_TRIGGER_EN;
|
|
prio = 0;
|
|
acc = 0;
|
|
break;
|
|
}
|
|
|
|
if (enable)
|
|
arvif->u.sta.uapsd |= value;
|
|
else
|
|
arvif->u.sta.uapsd &= ~value;
|
|
|
|
ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
|
|
WMI_STA_PS_PARAM_UAPSD,
|
|
arvif->u.sta.uapsd);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to set uapsd params: %d\n", ret);
|
|
goto exit;
|
|
}
|
|
|
|
if (arvif->u.sta.uapsd)
|
|
value = WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD;
|
|
else
|
|
value = WMI_STA_PS_RX_WAKE_POLICY_WAKE;
|
|
|
|
ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
|
|
WMI_STA_PS_PARAM_RX_WAKE_POLICY,
|
|
value);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to set rx wake param: %d\n", ret);
|
|
|
|
ret = ath10k_mac_vif_recalc_ps_wake_threshold(arvif);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to recalc ps wake threshold on vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = ath10k_mac_vif_recalc_ps_poll_count(arvif);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to recalc ps poll count on vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
if (test_bit(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, ar->wmi.svc_map) ||
|
|
test_bit(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, ar->wmi.svc_map)) {
|
|
/* Only userspace can make an educated decision when to send
|
|
* trigger frame. The following effectively disables u-UAPSD
|
|
* autotrigger in firmware (which is enabled by default
|
|
* provided the autotrigger service is available).
|
|
*/
|
|
|
|
arg.wmm_ac = acc;
|
|
arg.user_priority = prio;
|
|
arg.service_interval = 0;
|
|
arg.suspend_interval = WMI_STA_UAPSD_MAX_INTERVAL_MSEC;
|
|
arg.delay_interval = WMI_STA_UAPSD_MAX_INTERVAL_MSEC;
|
|
|
|
ret = ath10k_wmi_vdev_sta_uapsd(ar, arvif->vdev_id,
|
|
arvif->bssid, &arg, 1);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to set uapsd auto trigger %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
exit:
|
|
return ret;
|
|
}
|
|
|
|
static int ath10k_conf_tx(struct ieee80211_hw *hw,
|
|
struct ieee80211_vif *vif, u16 ac,
|
|
const struct ieee80211_tx_queue_params *params)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
struct wmi_wmm_params_arg *p = NULL;
|
|
int ret;
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
|
|
switch (ac) {
|
|
case IEEE80211_AC_VO:
|
|
p = &arvif->wmm_params.ac_vo;
|
|
break;
|
|
case IEEE80211_AC_VI:
|
|
p = &arvif->wmm_params.ac_vi;
|
|
break;
|
|
case IEEE80211_AC_BE:
|
|
p = &arvif->wmm_params.ac_be;
|
|
break;
|
|
case IEEE80211_AC_BK:
|
|
p = &arvif->wmm_params.ac_bk;
|
|
break;
|
|
}
|
|
|
|
if (WARN_ON(!p)) {
|
|
ret = -EINVAL;
|
|
goto exit;
|
|
}
|
|
|
|
p->cwmin = params->cw_min;
|
|
p->cwmax = params->cw_max;
|
|
p->aifs = params->aifs;
|
|
|
|
/*
|
|
* The channel time duration programmed in the HW is in absolute
|
|
* microseconds, while mac80211 gives the txop in units of
|
|
* 32 microseconds.
|
|
*/
|
|
p->txop = params->txop * 32;
|
|
|
|
if (ar->wmi.ops->gen_vdev_wmm_conf) {
|
|
ret = ath10k_wmi_vdev_wmm_conf(ar, arvif->vdev_id,
|
|
&arvif->wmm_params);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to set vdev wmm params on vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
goto exit;
|
|
}
|
|
} else {
|
|
/* This won't work well with multi-interface cases but it's
|
|
* better than nothing.
|
|
*/
|
|
ret = ath10k_wmi_pdev_set_wmm_params(ar, &arvif->wmm_params);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to set wmm params: %d\n", ret);
|
|
goto exit;
|
|
}
|
|
}
|
|
|
|
ret = ath10k_conf_tx_uapsd(ar, vif, ac, params->uapsd);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to set sta uapsd: %d\n", ret);
|
|
|
|
exit:
|
|
mutex_unlock(&ar->conf_mutex);
|
|
return ret;
|
|
}
|
|
|
|
#define ATH10K_ROC_TIMEOUT_HZ (2 * HZ)
|
|
|
|
static int ath10k_remain_on_channel(struct ieee80211_hw *hw,
|
|
struct ieee80211_vif *vif,
|
|
struct ieee80211_channel *chan,
|
|
int duration,
|
|
enum ieee80211_roc_type type)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
struct wmi_start_scan_arg arg;
|
|
int ret = 0;
|
|
u32 scan_time_msec;
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
|
|
if (ath10k_mac_tdls_vif_stations_count(hw, vif) > 0) {
|
|
ret = -EBUSY;
|
|
goto exit;
|
|
}
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
switch (ar->scan.state) {
|
|
case ATH10K_SCAN_IDLE:
|
|
reinit_completion(&ar->scan.started);
|
|
reinit_completion(&ar->scan.completed);
|
|
reinit_completion(&ar->scan.on_channel);
|
|
ar->scan.state = ATH10K_SCAN_STARTING;
|
|
ar->scan.is_roc = true;
|
|
ar->scan.vdev_id = arvif->vdev_id;
|
|
ar->scan.roc_freq = chan->center_freq;
|
|
ar->scan.roc_notify = true;
|
|
ret = 0;
|
|
break;
|
|
case ATH10K_SCAN_STARTING:
|
|
case ATH10K_SCAN_RUNNING:
|
|
case ATH10K_SCAN_ABORTING:
|
|
ret = -EBUSY;
|
|
break;
|
|
}
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
if (ret)
|
|
goto exit;
|
|
|
|
scan_time_msec = ar->hw->wiphy->max_remain_on_channel_duration * 2;
|
|
|
|
memset(&arg, 0, sizeof(arg));
|
|
ath10k_wmi_start_scan_init(ar, &arg);
|
|
arg.vdev_id = arvif->vdev_id;
|
|
arg.scan_id = ATH10K_SCAN_ID;
|
|
arg.n_channels = 1;
|
|
arg.channels[0] = chan->center_freq;
|
|
arg.dwell_time_active = scan_time_msec;
|
|
arg.dwell_time_passive = scan_time_msec;
|
|
arg.max_scan_time = scan_time_msec;
|
|
arg.scan_ctrl_flags |= WMI_SCAN_FLAG_PASSIVE;
|
|
arg.scan_ctrl_flags |= WMI_SCAN_FILTER_PROBE_REQ;
|
|
arg.burst_duration_ms = duration;
|
|
|
|
ret = ath10k_start_scan(ar, &arg);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to start roc scan: %d\n", ret);
|
|
spin_lock_bh(&ar->data_lock);
|
|
ar->scan.state = ATH10K_SCAN_IDLE;
|
|
spin_unlock_bh(&ar->data_lock);
|
|
goto exit;
|
|
}
|
|
|
|
ret = wait_for_completion_timeout(&ar->scan.on_channel, 3 * HZ);
|
|
if (ret == 0) {
|
|
ath10k_warn(ar, "failed to switch to channel for roc scan\n");
|
|
|
|
ret = ath10k_scan_stop(ar);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to stop scan: %d\n", ret);
|
|
|
|
ret = -ETIMEDOUT;
|
|
goto exit;
|
|
}
|
|
|
|
ieee80211_queue_delayed_work(ar->hw, &ar->scan.timeout,
|
|
msecs_to_jiffies(duration));
|
|
|
|
ret = 0;
|
|
exit:
|
|
mutex_unlock(&ar->conf_mutex);
|
|
return ret;
|
|
}
|
|
|
|
static int ath10k_cancel_remain_on_channel(struct ieee80211_hw *hw)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
ar->scan.roc_notify = false;
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
ath10k_scan_abort(ar);
|
|
|
|
mutex_unlock(&ar->conf_mutex);
|
|
|
|
cancel_delayed_work_sync(&ar->scan.timeout);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Both RTS and Fragmentation threshold are interface-specific
|
|
* in ath10k, but device-specific in mac80211.
|
|
*/
|
|
|
|
static int ath10k_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
struct ath10k_vif *arvif;
|
|
int ret = 0;
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
list_for_each_entry(arvif, &ar->arvifs, list) {
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d rts threshold %d\n",
|
|
arvif->vdev_id, value);
|
|
|
|
ret = ath10k_mac_set_rts(arvif, value);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to set rts threshold for vdev %d: %d\n",
|
|
arvif->vdev_id, ret);
|
|
break;
|
|
}
|
|
}
|
|
mutex_unlock(&ar->conf_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ath10k_mac_op_set_frag_threshold(struct ieee80211_hw *hw, u32 value)
|
|
{
|
|
/* Even though there's a WMI enum for fragmentation threshold no known
|
|
* firmware actually implements it. Moreover it is not possible to rely
|
|
* frame fragmentation to mac80211 because firmware clears the "more
|
|
* fragments" bit in frame control making it impossible for remote
|
|
* devices to reassemble frames.
|
|
*
|
|
* Hence implement a dummy callback just to say fragmentation isn't
|
|
* supported. This effectively prevents mac80211 from doing frame
|
|
* fragmentation in software.
|
|
*/
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static void ath10k_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
|
|
u32 queues, bool drop)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
bool skip;
|
|
long time_left;
|
|
|
|
/* mac80211 doesn't care if we really xmit queued frames or not
|
|
* we'll collect those frames either way if we stop/delete vdevs
|
|
*/
|
|
if (drop)
|
|
return;
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
|
|
if (ar->state == ATH10K_STATE_WEDGED)
|
|
goto skip;
|
|
|
|
time_left = wait_event_timeout(ar->htt.empty_tx_wq, ({
|
|
bool empty;
|
|
|
|
spin_lock_bh(&ar->htt.tx_lock);
|
|
empty = (ar->htt.num_pending_tx == 0);
|
|
spin_unlock_bh(&ar->htt.tx_lock);
|
|
|
|
skip = (ar->state == ATH10K_STATE_WEDGED) ||
|
|
test_bit(ATH10K_FLAG_CRASH_FLUSH,
|
|
&ar->dev_flags);
|
|
|
|
(empty || skip);
|
|
}), ATH10K_FLUSH_TIMEOUT_HZ);
|
|
|
|
if (time_left == 0 || skip)
|
|
ath10k_warn(ar, "failed to flush transmit queue (skip %i ar-state %i): %ld\n",
|
|
skip, ar->state, time_left);
|
|
|
|
skip:
|
|
mutex_unlock(&ar->conf_mutex);
|
|
}
|
|
|
|
/* TODO: Implement this function properly
|
|
* For now it is needed to reply to Probe Requests in IBSS mode.
|
|
* Propably we need this information from FW.
|
|
*/
|
|
static int ath10k_tx_last_beacon(struct ieee80211_hw *hw)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
static void ath10k_reconfig_complete(struct ieee80211_hw *hw,
|
|
enum ieee80211_reconfig_type reconfig_type)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
|
|
if (reconfig_type != IEEE80211_RECONFIG_TYPE_RESTART)
|
|
return;
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
|
|
/* If device failed to restart it will be in a different state, e.g.
|
|
* ATH10K_STATE_WEDGED
|
|
*/
|
|
if (ar->state == ATH10K_STATE_RESTARTED) {
|
|
ath10k_info(ar, "device successfully recovered\n");
|
|
ar->state = ATH10K_STATE_ON;
|
|
ieee80211_wake_queues(ar->hw);
|
|
}
|
|
|
|
mutex_unlock(&ar->conf_mutex);
|
|
}
|
|
|
|
static void
|
|
ath10k_mac_update_bss_chan_survey(struct ath10k *ar,
|
|
struct ieee80211_channel *channel)
|
|
{
|
|
int ret;
|
|
enum wmi_bss_survey_req_type type = WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
if (!test_bit(WMI_SERVICE_BSS_CHANNEL_INFO_64, ar->wmi.svc_map) ||
|
|
(ar->rx_channel != channel))
|
|
return;
|
|
|
|
if (ar->scan.state != ATH10K_SCAN_IDLE) {
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "ignoring bss chan info request while scanning..\n");
|
|
return;
|
|
}
|
|
|
|
reinit_completion(&ar->bss_survey_done);
|
|
|
|
ret = ath10k_wmi_pdev_bss_chan_info_request(ar, type);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to send pdev bss chan info request\n");
|
|
return;
|
|
}
|
|
|
|
ret = wait_for_completion_timeout(&ar->bss_survey_done, 3 * HZ);
|
|
if (!ret) {
|
|
ath10k_warn(ar, "bss channel survey timed out\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
static int ath10k_get_survey(struct ieee80211_hw *hw, int idx,
|
|
struct survey_info *survey)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
struct ieee80211_supported_band *sband;
|
|
struct survey_info *ar_survey = &ar->survey[idx];
|
|
int ret = 0;
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
|
|
sband = hw->wiphy->bands[NL80211_BAND_2GHZ];
|
|
if (sband && idx >= sband->n_channels) {
|
|
idx -= sband->n_channels;
|
|
sband = NULL;
|
|
}
|
|
|
|
if (!sband)
|
|
sband = hw->wiphy->bands[NL80211_BAND_5GHZ];
|
|
|
|
if (!sband || idx >= sband->n_channels) {
|
|
ret = -ENOENT;
|
|
goto exit;
|
|
}
|
|
|
|
ath10k_mac_update_bss_chan_survey(ar, &sband->channels[idx]);
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
memcpy(survey, ar_survey, sizeof(*survey));
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
survey->channel = &sband->channels[idx];
|
|
|
|
if (ar->rx_channel == survey->channel)
|
|
survey->filled |= SURVEY_INFO_IN_USE;
|
|
|
|
exit:
|
|
mutex_unlock(&ar->conf_mutex);
|
|
return ret;
|
|
}
|
|
|
|
static bool
|
|
ath10k_mac_bitrate_mask_has_single_rate(struct ath10k *ar,
|
|
enum nl80211_band band,
|
|
const struct cfg80211_bitrate_mask *mask)
|
|
{
|
|
int num_rates = 0;
|
|
int i;
|
|
|
|
num_rates += hweight32(mask->control[band].legacy);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mask->control[band].ht_mcs); i++)
|
|
num_rates += hweight8(mask->control[band].ht_mcs[i]);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mask->control[band].vht_mcs); i++)
|
|
num_rates += hweight16(mask->control[band].vht_mcs[i]);
|
|
|
|
return num_rates == 1;
|
|
}
|
|
|
|
static bool
|
|
ath10k_mac_bitrate_mask_get_single_nss(struct ath10k *ar,
|
|
enum nl80211_band band,
|
|
const struct cfg80211_bitrate_mask *mask,
|
|
int *nss)
|
|
{
|
|
struct ieee80211_supported_band *sband = &ar->mac.sbands[band];
|
|
u16 vht_mcs_map = le16_to_cpu(sband->vht_cap.vht_mcs.tx_mcs_map);
|
|
u8 ht_nss_mask = 0;
|
|
u8 vht_nss_mask = 0;
|
|
int i;
|
|
|
|
if (mask->control[band].legacy)
|
|
return false;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mask->control[band].ht_mcs); i++) {
|
|
if (mask->control[band].ht_mcs[i] == 0)
|
|
continue;
|
|
else if (mask->control[band].ht_mcs[i] ==
|
|
sband->ht_cap.mcs.rx_mask[i])
|
|
ht_nss_mask |= BIT(i);
|
|
else
|
|
return false;
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mask->control[band].vht_mcs); i++) {
|
|
if (mask->control[band].vht_mcs[i] == 0)
|
|
continue;
|
|
else if (mask->control[band].vht_mcs[i] ==
|
|
ath10k_mac_get_max_vht_mcs_map(vht_mcs_map, i))
|
|
vht_nss_mask |= BIT(i);
|
|
else
|
|
return false;
|
|
}
|
|
|
|
if (ht_nss_mask != vht_nss_mask)
|
|
return false;
|
|
|
|
if (ht_nss_mask == 0)
|
|
return false;
|
|
|
|
if (BIT(fls(ht_nss_mask)) - 1 != ht_nss_mask)
|
|
return false;
|
|
|
|
*nss = fls(ht_nss_mask);
|
|
|
|
return true;
|
|
}
|
|
|
|
static int
|
|
ath10k_mac_bitrate_mask_get_single_rate(struct ath10k *ar,
|
|
enum nl80211_band band,
|
|
const struct cfg80211_bitrate_mask *mask,
|
|
u8 *rate, u8 *nss)
|
|
{
|
|
struct ieee80211_supported_band *sband = &ar->mac.sbands[band];
|
|
int rate_idx;
|
|
int i;
|
|
u16 bitrate;
|
|
u8 preamble;
|
|
u8 hw_rate;
|
|
|
|
if (hweight32(mask->control[band].legacy) == 1) {
|
|
rate_idx = ffs(mask->control[band].legacy) - 1;
|
|
|
|
hw_rate = sband->bitrates[rate_idx].hw_value;
|
|
bitrate = sband->bitrates[rate_idx].bitrate;
|
|
|
|
if (ath10k_mac_bitrate_is_cck(bitrate))
|
|
preamble = WMI_RATE_PREAMBLE_CCK;
|
|
else
|
|
preamble = WMI_RATE_PREAMBLE_OFDM;
|
|
|
|
*nss = 1;
|
|
*rate = preamble << 6 |
|
|
(*nss - 1) << 4 |
|
|
hw_rate << 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mask->control[band].ht_mcs); i++) {
|
|
if (hweight8(mask->control[band].ht_mcs[i]) == 1) {
|
|
*nss = i + 1;
|
|
*rate = WMI_RATE_PREAMBLE_HT << 6 |
|
|
(*nss - 1) << 4 |
|
|
(ffs(mask->control[band].ht_mcs[i]) - 1);
|
|
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mask->control[band].vht_mcs); i++) {
|
|
if (hweight16(mask->control[band].vht_mcs[i]) == 1) {
|
|
*nss = i + 1;
|
|
*rate = WMI_RATE_PREAMBLE_VHT << 6 |
|
|
(*nss - 1) << 4 |
|
|
(ffs(mask->control[band].vht_mcs[i]) - 1);
|
|
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int ath10k_mac_set_fixed_rate_params(struct ath10k_vif *arvif,
|
|
u8 rate, u8 nss, u8 sgi, u8 ldpc)
|
|
{
|
|
struct ath10k *ar = arvif->ar;
|
|
u32 vdev_param;
|
|
int ret;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac set fixed rate params vdev %i rate 0x%02hhx nss %hhu sgi %hhu\n",
|
|
arvif->vdev_id, rate, nss, sgi);
|
|
|
|
vdev_param = ar->wmi.vdev_param->fixed_rate;
|
|
ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, rate);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to set fixed rate param 0x%02x: %d\n",
|
|
rate, ret);
|
|
return ret;
|
|
}
|
|
|
|
vdev_param = ar->wmi.vdev_param->nss;
|
|
ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, nss);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to set nss param %d: %d\n", nss, ret);
|
|
return ret;
|
|
}
|
|
|
|
vdev_param = ar->wmi.vdev_param->sgi;
|
|
ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, sgi);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to set sgi param %d: %d\n", sgi, ret);
|
|
return ret;
|
|
}
|
|
|
|
vdev_param = ar->wmi.vdev_param->ldpc;
|
|
ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, ldpc);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to set ldpc param %d: %d\n", ldpc, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool
|
|
ath10k_mac_can_set_bitrate_mask(struct ath10k *ar,
|
|
enum nl80211_band band,
|
|
const struct cfg80211_bitrate_mask *mask)
|
|
{
|
|
int i;
|
|
u16 vht_mcs;
|
|
|
|
/* Due to firmware limitation in WMI_PEER_ASSOC_CMDID it is impossible
|
|
* to express all VHT MCS rate masks. Effectively only the following
|
|
* ranges can be used: none, 0-7, 0-8 and 0-9.
|
|
*/
|
|
for (i = 0; i < NL80211_VHT_NSS_MAX; i++) {
|
|
vht_mcs = mask->control[band].vht_mcs[i];
|
|
|
|
switch (vht_mcs) {
|
|
case 0:
|
|
case BIT(8) - 1:
|
|
case BIT(9) - 1:
|
|
case BIT(10) - 1:
|
|
break;
|
|
default:
|
|
ath10k_warn(ar, "refusing bitrate mask with missing 0-7 VHT MCS rates\n");
|
|
return false;
|
|
}
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static void ath10k_mac_set_bitrate_mask_iter(void *data,
|
|
struct ieee80211_sta *sta)
|
|
{
|
|
struct ath10k_vif *arvif = data;
|
|
struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
|
|
struct ath10k *ar = arvif->ar;
|
|
|
|
if (arsta->arvif != arvif)
|
|
return;
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
arsta->changed |= IEEE80211_RC_SUPP_RATES_CHANGED;
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
ieee80211_queue_work(ar->hw, &arsta->update_wk);
|
|
}
|
|
|
|
static int ath10k_mac_op_set_bitrate_mask(struct ieee80211_hw *hw,
|
|
struct ieee80211_vif *vif,
|
|
const struct cfg80211_bitrate_mask *mask)
|
|
{
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
struct cfg80211_chan_def def;
|
|
struct ath10k *ar = arvif->ar;
|
|
enum nl80211_band band;
|
|
const u8 *ht_mcs_mask;
|
|
const u16 *vht_mcs_mask;
|
|
u8 rate;
|
|
u8 nss;
|
|
u8 sgi;
|
|
u8 ldpc;
|
|
int single_nss;
|
|
int ret;
|
|
|
|
if (ath10k_mac_vif_chan(vif, &def))
|
|
return -EPERM;
|
|
|
|
band = def.chan->band;
|
|
ht_mcs_mask = mask->control[band].ht_mcs;
|
|
vht_mcs_mask = mask->control[band].vht_mcs;
|
|
ldpc = !!(ar->ht_cap_info & WMI_HT_CAP_LDPC);
|
|
|
|
sgi = mask->control[band].gi;
|
|
if (sgi == NL80211_TXRATE_FORCE_LGI)
|
|
return -EINVAL;
|
|
|
|
if (ath10k_mac_bitrate_mask_has_single_rate(ar, band, mask)) {
|
|
ret = ath10k_mac_bitrate_mask_get_single_rate(ar, band, mask,
|
|
&rate, &nss);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to get single rate for vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
return ret;
|
|
}
|
|
} else if (ath10k_mac_bitrate_mask_get_single_nss(ar, band, mask,
|
|
&single_nss)) {
|
|
rate = WMI_FIXED_RATE_NONE;
|
|
nss = single_nss;
|
|
} else {
|
|
rate = WMI_FIXED_RATE_NONE;
|
|
nss = min(ar->num_rf_chains,
|
|
max(ath10k_mac_max_ht_nss(ht_mcs_mask),
|
|
ath10k_mac_max_vht_nss(vht_mcs_mask)));
|
|
|
|
if (!ath10k_mac_can_set_bitrate_mask(ar, band, mask))
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
|
|
arvif->bitrate_mask = *mask;
|
|
ieee80211_iterate_stations_atomic(ar->hw,
|
|
ath10k_mac_set_bitrate_mask_iter,
|
|
arvif);
|
|
|
|
mutex_unlock(&ar->conf_mutex);
|
|
}
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
|
|
ret = ath10k_mac_set_fixed_rate_params(arvif, rate, nss, sgi, ldpc);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to set fixed rate params on vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
goto exit;
|
|
}
|
|
|
|
exit:
|
|
mutex_unlock(&ar->conf_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ath10k_sta_rc_update(struct ieee80211_hw *hw,
|
|
struct ieee80211_vif *vif,
|
|
struct ieee80211_sta *sta,
|
|
u32 changed)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
struct ath10k_peer *peer;
|
|
u32 bw, smps;
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
|
|
peer = ath10k_peer_find(ar, arvif->vdev_id, sta->addr);
|
|
if (!peer) {
|
|
spin_unlock_bh(&ar->data_lock);
|
|
ath10k_warn(ar, "mac sta rc update failed to find peer %pM on vdev %i\n",
|
|
sta->addr, arvif->vdev_id);
|
|
return;
|
|
}
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC,
|
|
"mac sta rc update for %pM changed %08x bw %d nss %d smps %d\n",
|
|
sta->addr, changed, sta->bandwidth, sta->rx_nss,
|
|
sta->smps_mode);
|
|
|
|
if (changed & IEEE80211_RC_BW_CHANGED) {
|
|
bw = WMI_PEER_CHWIDTH_20MHZ;
|
|
|
|
switch (sta->bandwidth) {
|
|
case IEEE80211_STA_RX_BW_20:
|
|
bw = WMI_PEER_CHWIDTH_20MHZ;
|
|
break;
|
|
case IEEE80211_STA_RX_BW_40:
|
|
bw = WMI_PEER_CHWIDTH_40MHZ;
|
|
break;
|
|
case IEEE80211_STA_RX_BW_80:
|
|
bw = WMI_PEER_CHWIDTH_80MHZ;
|
|
break;
|
|
case IEEE80211_STA_RX_BW_160:
|
|
bw = WMI_PEER_CHWIDTH_160MHZ;
|
|
break;
|
|
default:
|
|
ath10k_warn(ar, "Invalid bandwidth %d in rc update for %pM\n",
|
|
sta->bandwidth, sta->addr);
|
|
bw = WMI_PEER_CHWIDTH_20MHZ;
|
|
break;
|
|
}
|
|
|
|
arsta->bw = bw;
|
|
}
|
|
|
|
if (changed & IEEE80211_RC_NSS_CHANGED)
|
|
arsta->nss = sta->rx_nss;
|
|
|
|
if (changed & IEEE80211_RC_SMPS_CHANGED) {
|
|
smps = WMI_PEER_SMPS_PS_NONE;
|
|
|
|
switch (sta->smps_mode) {
|
|
case IEEE80211_SMPS_AUTOMATIC:
|
|
case IEEE80211_SMPS_OFF:
|
|
smps = WMI_PEER_SMPS_PS_NONE;
|
|
break;
|
|
case IEEE80211_SMPS_STATIC:
|
|
smps = WMI_PEER_SMPS_STATIC;
|
|
break;
|
|
case IEEE80211_SMPS_DYNAMIC:
|
|
smps = WMI_PEER_SMPS_DYNAMIC;
|
|
break;
|
|
case IEEE80211_SMPS_NUM_MODES:
|
|
ath10k_warn(ar, "Invalid smps %d in sta rc update for %pM\n",
|
|
sta->smps_mode, sta->addr);
|
|
smps = WMI_PEER_SMPS_PS_NONE;
|
|
break;
|
|
}
|
|
|
|
arsta->smps = smps;
|
|
}
|
|
|
|
arsta->changed |= changed;
|
|
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
ieee80211_queue_work(hw, &arsta->update_wk);
|
|
}
|
|
|
|
static void ath10k_offset_tsf(struct ieee80211_hw *hw,
|
|
struct ieee80211_vif *vif, s64 tsf_offset)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
u32 offset, vdev_param;
|
|
int ret;
|
|
|
|
if (tsf_offset < 0) {
|
|
vdev_param = ar->wmi.vdev_param->dec_tsf;
|
|
offset = -tsf_offset;
|
|
} else {
|
|
vdev_param = ar->wmi.vdev_param->inc_tsf;
|
|
offset = tsf_offset;
|
|
}
|
|
|
|
ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
|
|
vdev_param, offset);
|
|
|
|
if (ret && ret != -EOPNOTSUPP)
|
|
ath10k_warn(ar, "failed to set tsf offset %d cmd %d: %d\n",
|
|
offset, vdev_param, ret);
|
|
}
|
|
|
|
static int ath10k_ampdu_action(struct ieee80211_hw *hw,
|
|
struct ieee80211_vif *vif,
|
|
struct ieee80211_ampdu_params *params)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
struct ieee80211_sta *sta = params->sta;
|
|
enum ieee80211_ampdu_mlme_action action = params->action;
|
|
u16 tid = params->tid;
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac ampdu vdev_id %i sta %pM tid %hu action %d\n",
|
|
arvif->vdev_id, sta->addr, tid, action);
|
|
|
|
switch (action) {
|
|
case IEEE80211_AMPDU_RX_START:
|
|
case IEEE80211_AMPDU_RX_STOP:
|
|
/* HTT AddBa/DelBa events trigger mac80211 Rx BA session
|
|
* creation/removal. Do we need to verify this?
|
|
*/
|
|
return 0;
|
|
case IEEE80211_AMPDU_TX_START:
|
|
case IEEE80211_AMPDU_TX_STOP_CONT:
|
|
case IEEE80211_AMPDU_TX_STOP_FLUSH:
|
|
case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
|
|
case IEEE80211_AMPDU_TX_OPERATIONAL:
|
|
/* Firmware offloads Tx aggregation entirely so deny mac80211
|
|
* Tx aggregation requests.
|
|
*/
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static void
|
|
ath10k_mac_update_rx_channel(struct ath10k *ar,
|
|
struct ieee80211_chanctx_conf *ctx,
|
|
struct ieee80211_vif_chanctx_switch *vifs,
|
|
int n_vifs)
|
|
{
|
|
struct cfg80211_chan_def *def = NULL;
|
|
|
|
/* Both locks are required because ar->rx_channel is modified. This
|
|
* allows readers to hold either lock.
|
|
*/
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
lockdep_assert_held(&ar->data_lock);
|
|
|
|
WARN_ON(ctx && vifs);
|
|
WARN_ON(vifs && !n_vifs);
|
|
|
|
/* FIXME: Sort of an optimization and a workaround. Peers and vifs are
|
|
* on a linked list now. Doing a lookup peer -> vif -> chanctx for each
|
|
* ppdu on Rx may reduce performance on low-end systems. It should be
|
|
* possible to make tables/hashmaps to speed the lookup up (be vary of
|
|
* cpu data cache lines though regarding sizes) but to keep the initial
|
|
* implementation simple and less intrusive fallback to the slow lookup
|
|
* only for multi-channel cases. Single-channel cases will remain to
|
|
* use the old channel derival and thus performance should not be
|
|
* affected much.
|
|
*/
|
|
rcu_read_lock();
|
|
if (!ctx && ath10k_mac_num_chanctxs(ar) == 1) {
|
|
ieee80211_iter_chan_contexts_atomic(ar->hw,
|
|
ath10k_mac_get_any_chandef_iter,
|
|
&def);
|
|
|
|
if (vifs)
|
|
def = &vifs[0].new_ctx->def;
|
|
|
|
ar->rx_channel = def->chan;
|
|
} else if ((ctx && ath10k_mac_num_chanctxs(ar) == 0) ||
|
|
(ctx && (ar->state == ATH10K_STATE_RESTARTED))) {
|
|
/* During driver restart due to firmware assert, since mac80211
|
|
* already has valid channel context for given radio, channel
|
|
* context iteration return num_chanctx > 0. So fix rx_channel
|
|
* when restart is in progress.
|
|
*/
|
|
ar->rx_channel = ctx->def.chan;
|
|
} else {
|
|
ar->rx_channel = NULL;
|
|
}
|
|
rcu_read_unlock();
|
|
}
|
|
|
|
static void
|
|
ath10k_mac_update_vif_chan(struct ath10k *ar,
|
|
struct ieee80211_vif_chanctx_switch *vifs,
|
|
int n_vifs)
|
|
{
|
|
struct ath10k_vif *arvif;
|
|
int ret;
|
|
int i;
|
|
|
|
lockdep_assert_held(&ar->conf_mutex);
|
|
|
|
/* First stop monitor interface. Some FW versions crash if there's a
|
|
* lone monitor interface.
|
|
*/
|
|
if (ar->monitor_started)
|
|
ath10k_monitor_stop(ar);
|
|
|
|
for (i = 0; i < n_vifs; i++) {
|
|
arvif = (void *)vifs[i].vif->drv_priv;
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC,
|
|
"mac chanctx switch vdev_id %i freq %hu->%hu width %d->%d\n",
|
|
arvif->vdev_id,
|
|
vifs[i].old_ctx->def.chan->center_freq,
|
|
vifs[i].new_ctx->def.chan->center_freq,
|
|
vifs[i].old_ctx->def.width,
|
|
vifs[i].new_ctx->def.width);
|
|
|
|
if (WARN_ON(!arvif->is_started))
|
|
continue;
|
|
|
|
if (WARN_ON(!arvif->is_up))
|
|
continue;
|
|
|
|
ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to down vdev %d: %d\n",
|
|
arvif->vdev_id, ret);
|
|
continue;
|
|
}
|
|
}
|
|
|
|
/* All relevant vdevs are downed and associated channel resources
|
|
* should be available for the channel switch now.
|
|
*/
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
ath10k_mac_update_rx_channel(ar, NULL, vifs, n_vifs);
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
for (i = 0; i < n_vifs; i++) {
|
|
arvif = (void *)vifs[i].vif->drv_priv;
|
|
|
|
if (WARN_ON(!arvif->is_started))
|
|
continue;
|
|
|
|
if (WARN_ON(!arvif->is_up))
|
|
continue;
|
|
|
|
ret = ath10k_mac_setup_bcn_tmpl(arvif);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to update bcn tmpl during csa: %d\n",
|
|
ret);
|
|
|
|
ret = ath10k_mac_setup_prb_tmpl(arvif);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to update prb tmpl during csa: %d\n",
|
|
ret);
|
|
|
|
ret = ath10k_vdev_restart(arvif, &vifs[i].new_ctx->def);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to restart vdev %d: %d\n",
|
|
arvif->vdev_id, ret);
|
|
continue;
|
|
}
|
|
|
|
ret = ath10k_wmi_vdev_up(arvif->ar, arvif->vdev_id, arvif->aid,
|
|
arvif->bssid);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to bring vdev up %d: %d\n",
|
|
arvif->vdev_id, ret);
|
|
continue;
|
|
}
|
|
}
|
|
|
|
ath10k_monitor_recalc(ar);
|
|
}
|
|
|
|
static int
|
|
ath10k_mac_op_add_chanctx(struct ieee80211_hw *hw,
|
|
struct ieee80211_chanctx_conf *ctx)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC,
|
|
"mac chanctx add freq %hu width %d ptr %pK\n",
|
|
ctx->def.chan->center_freq, ctx->def.width, ctx);
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
ath10k_mac_update_rx_channel(ar, ctx, NULL, 0);
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
ath10k_recalc_radar_detection(ar);
|
|
ath10k_monitor_recalc(ar);
|
|
|
|
mutex_unlock(&ar->conf_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
ath10k_mac_op_remove_chanctx(struct ieee80211_hw *hw,
|
|
struct ieee80211_chanctx_conf *ctx)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC,
|
|
"mac chanctx remove freq %hu width %d ptr %pK\n",
|
|
ctx->def.chan->center_freq, ctx->def.width, ctx);
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
ath10k_mac_update_rx_channel(ar, NULL, NULL, 0);
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
ath10k_recalc_radar_detection(ar);
|
|
ath10k_monitor_recalc(ar);
|
|
|
|
mutex_unlock(&ar->conf_mutex);
|
|
}
|
|
|
|
struct ath10k_mac_change_chanctx_arg {
|
|
struct ieee80211_chanctx_conf *ctx;
|
|
struct ieee80211_vif_chanctx_switch *vifs;
|
|
int n_vifs;
|
|
int next_vif;
|
|
};
|
|
|
|
static void
|
|
ath10k_mac_change_chanctx_cnt_iter(void *data, u8 *mac,
|
|
struct ieee80211_vif *vif)
|
|
{
|
|
struct ath10k_mac_change_chanctx_arg *arg = data;
|
|
|
|
if (rcu_access_pointer(vif->chanctx_conf) != arg->ctx)
|
|
return;
|
|
|
|
arg->n_vifs++;
|
|
}
|
|
|
|
static void
|
|
ath10k_mac_change_chanctx_fill_iter(void *data, u8 *mac,
|
|
struct ieee80211_vif *vif)
|
|
{
|
|
struct ath10k_mac_change_chanctx_arg *arg = data;
|
|
struct ieee80211_chanctx_conf *ctx;
|
|
|
|
ctx = rcu_access_pointer(vif->chanctx_conf);
|
|
if (ctx != arg->ctx)
|
|
return;
|
|
|
|
if (WARN_ON(arg->next_vif == arg->n_vifs))
|
|
return;
|
|
|
|
arg->vifs[arg->next_vif].vif = vif;
|
|
arg->vifs[arg->next_vif].old_ctx = ctx;
|
|
arg->vifs[arg->next_vif].new_ctx = ctx;
|
|
arg->next_vif++;
|
|
}
|
|
|
|
static void
|
|
ath10k_mac_op_change_chanctx(struct ieee80211_hw *hw,
|
|
struct ieee80211_chanctx_conf *ctx,
|
|
u32 changed)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
struct ath10k_mac_change_chanctx_arg arg = { .ctx = ctx };
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC,
|
|
"mac chanctx change freq %hu width %d ptr %pK changed %x\n",
|
|
ctx->def.chan->center_freq, ctx->def.width, ctx, changed);
|
|
|
|
/* This shouldn't really happen because channel switching should use
|
|
* switch_vif_chanctx().
|
|
*/
|
|
if (WARN_ON(changed & IEEE80211_CHANCTX_CHANGE_CHANNEL))
|
|
goto unlock;
|
|
|
|
if (changed & IEEE80211_CHANCTX_CHANGE_WIDTH) {
|
|
ieee80211_iterate_active_interfaces_atomic(
|
|
hw,
|
|
IEEE80211_IFACE_ITER_NORMAL,
|
|
ath10k_mac_change_chanctx_cnt_iter,
|
|
&arg);
|
|
if (arg.n_vifs == 0)
|
|
goto radar;
|
|
|
|
arg.vifs = kcalloc(arg.n_vifs, sizeof(arg.vifs[0]),
|
|
GFP_KERNEL);
|
|
if (!arg.vifs)
|
|
goto radar;
|
|
|
|
ieee80211_iterate_active_interfaces_atomic(
|
|
hw,
|
|
IEEE80211_IFACE_ITER_NORMAL,
|
|
ath10k_mac_change_chanctx_fill_iter,
|
|
&arg);
|
|
ath10k_mac_update_vif_chan(ar, arg.vifs, arg.n_vifs);
|
|
kfree(arg.vifs);
|
|
}
|
|
|
|
radar:
|
|
ath10k_recalc_radar_detection(ar);
|
|
|
|
/* FIXME: How to configure Rx chains properly? */
|
|
|
|
/* No other actions are actually necessary. Firmware maintains channel
|
|
* definitions per vdev internally and there's no host-side channel
|
|
* context abstraction to configure, e.g. channel width.
|
|
*/
|
|
|
|
unlock:
|
|
mutex_unlock(&ar->conf_mutex);
|
|
}
|
|
|
|
static int
|
|
ath10k_mac_op_assign_vif_chanctx(struct ieee80211_hw *hw,
|
|
struct ieee80211_vif *vif,
|
|
struct ieee80211_chanctx_conf *ctx)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
int ret;
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC,
|
|
"mac chanctx assign ptr %pK vdev_id %i\n",
|
|
ctx, arvif->vdev_id);
|
|
|
|
if (WARN_ON(arvif->is_started)) {
|
|
mutex_unlock(&ar->conf_mutex);
|
|
return -EBUSY;
|
|
}
|
|
|
|
ret = ath10k_vdev_start(arvif, &ctx->def);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to start vdev %i addr %pM on freq %d: %d\n",
|
|
arvif->vdev_id, vif->addr,
|
|
ctx->def.chan->center_freq, ret);
|
|
goto err;
|
|
}
|
|
|
|
arvif->is_started = true;
|
|
|
|
ret = ath10k_mac_vif_setup_ps(arvif);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to update vdev %i ps: %d\n",
|
|
arvif->vdev_id, ret);
|
|
goto err_stop;
|
|
}
|
|
|
|
if (vif->type == NL80211_IFTYPE_MONITOR) {
|
|
ret = ath10k_wmi_vdev_up(ar, arvif->vdev_id, 0, vif->addr);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to up monitor vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
goto err_stop;
|
|
}
|
|
|
|
arvif->is_up = true;
|
|
}
|
|
|
|
if (ath10k_mac_can_set_cts_prot(arvif)) {
|
|
ret = ath10k_mac_set_cts_prot(arvif);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to set cts protection for vdev %d: %d\n",
|
|
arvif->vdev_id, ret);
|
|
}
|
|
|
|
if (ath10k_peer_stats_enabled(ar)) {
|
|
ar->pktlog_filter |= ATH10K_PKTLOG_PEER_STATS;
|
|
ret = ath10k_wmi_pdev_pktlog_enable(ar,
|
|
ar->pktlog_filter);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to enable pktlog %d\n", ret);
|
|
goto err_stop;
|
|
}
|
|
}
|
|
|
|
mutex_unlock(&ar->conf_mutex);
|
|
return 0;
|
|
|
|
err_stop:
|
|
ath10k_vdev_stop(arvif);
|
|
arvif->is_started = false;
|
|
ath10k_mac_vif_setup_ps(arvif);
|
|
|
|
err:
|
|
mutex_unlock(&ar->conf_mutex);
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
ath10k_mac_op_unassign_vif_chanctx(struct ieee80211_hw *hw,
|
|
struct ieee80211_vif *vif,
|
|
struct ieee80211_chanctx_conf *ctx)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
int ret;
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC,
|
|
"mac chanctx unassign ptr %pK vdev_id %i\n",
|
|
ctx, arvif->vdev_id);
|
|
|
|
WARN_ON(!arvif->is_started);
|
|
|
|
if (vif->type == NL80211_IFTYPE_MONITOR) {
|
|
WARN_ON(!arvif->is_up);
|
|
|
|
ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to down monitor vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
|
|
arvif->is_up = false;
|
|
}
|
|
|
|
ret = ath10k_vdev_stop(arvif);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to stop vdev %i: %d\n",
|
|
arvif->vdev_id, ret);
|
|
|
|
arvif->is_started = false;
|
|
|
|
mutex_unlock(&ar->conf_mutex);
|
|
}
|
|
|
|
static int
|
|
ath10k_mac_op_switch_vif_chanctx(struct ieee80211_hw *hw,
|
|
struct ieee80211_vif_chanctx_switch *vifs,
|
|
int n_vifs,
|
|
enum ieee80211_chanctx_switch_mode mode)
|
|
{
|
|
struct ath10k *ar = hw->priv;
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_MAC,
|
|
"mac chanctx switch n_vifs %d mode %d\n",
|
|
n_vifs, mode);
|
|
ath10k_mac_update_vif_chan(ar, vifs, n_vifs);
|
|
|
|
mutex_unlock(&ar->conf_mutex);
|
|
return 0;
|
|
}
|
|
|
|
static void ath10k_mac_op_sta_pre_rcu_remove(struct ieee80211_hw *hw,
|
|
struct ieee80211_vif *vif,
|
|
struct ieee80211_sta *sta)
|
|
{
|
|
struct ath10k *ar;
|
|
struct ath10k_peer *peer;
|
|
|
|
ar = hw->priv;
|
|
|
|
list_for_each_entry(peer, &ar->peers, list)
|
|
if (peer->sta == sta)
|
|
peer->removed = true;
|
|
}
|
|
|
|
static void ath10k_sta_statistics(struct ieee80211_hw *hw,
|
|
struct ieee80211_vif *vif,
|
|
struct ieee80211_sta *sta,
|
|
struct station_info *sinfo)
|
|
{
|
|
struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
|
|
struct ath10k *ar = arsta->arvif->ar;
|
|
|
|
if (!ath10k_peer_stats_enabled(ar))
|
|
return;
|
|
|
|
sinfo->rx_duration = arsta->rx_duration;
|
|
sinfo->filled |= 1ULL << NL80211_STA_INFO_RX_DURATION;
|
|
|
|
if (!arsta->txrate.legacy && !arsta->txrate.nss)
|
|
return;
|
|
|
|
if (arsta->txrate.legacy) {
|
|
sinfo->txrate.legacy = arsta->txrate.legacy;
|
|
} else {
|
|
sinfo->txrate.mcs = arsta->txrate.mcs;
|
|
sinfo->txrate.nss = arsta->txrate.nss;
|
|
sinfo->txrate.bw = arsta->txrate.bw;
|
|
}
|
|
sinfo->txrate.flags = arsta->txrate.flags;
|
|
sinfo->filled |= 1ULL << NL80211_STA_INFO_TX_BITRATE;
|
|
}
|
|
|
|
static const struct ieee80211_ops ath10k_ops = {
|
|
.tx = ath10k_mac_op_tx,
|
|
.wake_tx_queue = ath10k_mac_op_wake_tx_queue,
|
|
.start = ath10k_start,
|
|
.stop = ath10k_stop,
|
|
.config = ath10k_config,
|
|
.add_interface = ath10k_add_interface,
|
|
.remove_interface = ath10k_remove_interface,
|
|
.configure_filter = ath10k_configure_filter,
|
|
.bss_info_changed = ath10k_bss_info_changed,
|
|
.set_coverage_class = ath10k_mac_op_set_coverage_class,
|
|
.hw_scan = ath10k_hw_scan,
|
|
.cancel_hw_scan = ath10k_cancel_hw_scan,
|
|
.set_key = ath10k_set_key,
|
|
.set_default_unicast_key = ath10k_set_default_unicast_key,
|
|
.sta_state = ath10k_sta_state,
|
|
.conf_tx = ath10k_conf_tx,
|
|
.remain_on_channel = ath10k_remain_on_channel,
|
|
.cancel_remain_on_channel = ath10k_cancel_remain_on_channel,
|
|
.set_rts_threshold = ath10k_set_rts_threshold,
|
|
.set_frag_threshold = ath10k_mac_op_set_frag_threshold,
|
|
.flush = ath10k_flush,
|
|
.tx_last_beacon = ath10k_tx_last_beacon,
|
|
.set_antenna = ath10k_set_antenna,
|
|
.get_antenna = ath10k_get_antenna,
|
|
.reconfig_complete = ath10k_reconfig_complete,
|
|
.get_survey = ath10k_get_survey,
|
|
.set_bitrate_mask = ath10k_mac_op_set_bitrate_mask,
|
|
.sta_rc_update = ath10k_sta_rc_update,
|
|
.offset_tsf = ath10k_offset_tsf,
|
|
.ampdu_action = ath10k_ampdu_action,
|
|
.get_et_sset_count = ath10k_debug_get_et_sset_count,
|
|
.get_et_stats = ath10k_debug_get_et_stats,
|
|
.get_et_strings = ath10k_debug_get_et_strings,
|
|
.add_chanctx = ath10k_mac_op_add_chanctx,
|
|
.remove_chanctx = ath10k_mac_op_remove_chanctx,
|
|
.change_chanctx = ath10k_mac_op_change_chanctx,
|
|
.assign_vif_chanctx = ath10k_mac_op_assign_vif_chanctx,
|
|
.unassign_vif_chanctx = ath10k_mac_op_unassign_vif_chanctx,
|
|
.switch_vif_chanctx = ath10k_mac_op_switch_vif_chanctx,
|
|
.sta_pre_rcu_remove = ath10k_mac_op_sta_pre_rcu_remove,
|
|
.sta_statistics = ath10k_sta_statistics,
|
|
|
|
CFG80211_TESTMODE_CMD(ath10k_tm_cmd)
|
|
|
|
#ifdef CONFIG_PM
|
|
.suspend = ath10k_wow_op_suspend,
|
|
.resume = ath10k_wow_op_resume,
|
|
.set_wakeup = ath10k_wow_op_set_wakeup,
|
|
#endif
|
|
#ifdef CONFIG_MAC80211_DEBUGFS
|
|
.sta_add_debugfs = ath10k_sta_add_debugfs,
|
|
#endif
|
|
};
|
|
|
|
#define CHAN2G(_channel, _freq, _flags) { \
|
|
.band = NL80211_BAND_2GHZ, \
|
|
.hw_value = (_channel), \
|
|
.center_freq = (_freq), \
|
|
.flags = (_flags), \
|
|
.max_antenna_gain = 0, \
|
|
.max_power = 30, \
|
|
}
|
|
|
|
#define CHAN5G(_channel, _freq, _flags) { \
|
|
.band = NL80211_BAND_5GHZ, \
|
|
.hw_value = (_channel), \
|
|
.center_freq = (_freq), \
|
|
.flags = (_flags), \
|
|
.max_antenna_gain = 0, \
|
|
.max_power = 30, \
|
|
}
|
|
|
|
static const struct ieee80211_channel ath10k_2ghz_channels[] = {
|
|
CHAN2G(1, 2412, 0),
|
|
CHAN2G(2, 2417, 0),
|
|
CHAN2G(3, 2422, 0),
|
|
CHAN2G(4, 2427, 0),
|
|
CHAN2G(5, 2432, 0),
|
|
CHAN2G(6, 2437, 0),
|
|
CHAN2G(7, 2442, 0),
|
|
CHAN2G(8, 2447, 0),
|
|
CHAN2G(9, 2452, 0),
|
|
CHAN2G(10, 2457, 0),
|
|
CHAN2G(11, 2462, 0),
|
|
CHAN2G(12, 2467, 0),
|
|
CHAN2G(13, 2472, 0),
|
|
CHAN2G(14, 2484, 0),
|
|
};
|
|
|
|
static const struct ieee80211_channel ath10k_5ghz_channels[] = {
|
|
CHAN5G(36, 5180, 0),
|
|
CHAN5G(40, 5200, 0),
|
|
CHAN5G(44, 5220, 0),
|
|
CHAN5G(48, 5240, 0),
|
|
CHAN5G(52, 5260, 0),
|
|
CHAN5G(56, 5280, 0),
|
|
CHAN5G(60, 5300, 0),
|
|
CHAN5G(64, 5320, 0),
|
|
CHAN5G(100, 5500, 0),
|
|
CHAN5G(104, 5520, 0),
|
|
CHAN5G(108, 5540, 0),
|
|
CHAN5G(112, 5560, 0),
|
|
CHAN5G(116, 5580, 0),
|
|
CHAN5G(120, 5600, 0),
|
|
CHAN5G(124, 5620, 0),
|
|
CHAN5G(128, 5640, 0),
|
|
CHAN5G(132, 5660, 0),
|
|
CHAN5G(136, 5680, 0),
|
|
CHAN5G(140, 5700, 0),
|
|
CHAN5G(144, 5720, 0),
|
|
CHAN5G(149, 5745, 0),
|
|
CHAN5G(153, 5765, 0),
|
|
CHAN5G(157, 5785, 0),
|
|
CHAN5G(161, 5805, 0),
|
|
CHAN5G(165, 5825, 0),
|
|
CHAN5G(169, 5845, 0),
|
|
};
|
|
|
|
struct ath10k *ath10k_mac_create(size_t priv_size)
|
|
{
|
|
struct ieee80211_hw *hw;
|
|
struct ieee80211_ops *ops;
|
|
struct ath10k *ar;
|
|
|
|
ops = kmemdup(&ath10k_ops, sizeof(ath10k_ops), GFP_KERNEL);
|
|
if (!ops)
|
|
return NULL;
|
|
|
|
hw = ieee80211_alloc_hw(sizeof(struct ath10k) + priv_size, ops);
|
|
if (!hw) {
|
|
kfree(ops);
|
|
return NULL;
|
|
}
|
|
|
|
ar = hw->priv;
|
|
ar->hw = hw;
|
|
ar->ops = ops;
|
|
|
|
return ar;
|
|
}
|
|
|
|
void ath10k_mac_destroy(struct ath10k *ar)
|
|
{
|
|
struct ieee80211_ops *ops = ar->ops;
|
|
|
|
ieee80211_free_hw(ar->hw);
|
|
kfree(ops);
|
|
}
|
|
|
|
static const struct ieee80211_iface_limit ath10k_if_limits[] = {
|
|
{
|
|
.max = 8,
|
|
.types = BIT(NL80211_IFTYPE_STATION)
|
|
| BIT(NL80211_IFTYPE_P2P_CLIENT)
|
|
},
|
|
{
|
|
.max = 3,
|
|
.types = BIT(NL80211_IFTYPE_P2P_GO)
|
|
},
|
|
{
|
|
.max = 1,
|
|
.types = BIT(NL80211_IFTYPE_P2P_DEVICE)
|
|
},
|
|
{
|
|
.max = 7,
|
|
.types = BIT(NL80211_IFTYPE_AP)
|
|
#ifdef CONFIG_MAC80211_MESH
|
|
| BIT(NL80211_IFTYPE_MESH_POINT)
|
|
#endif
|
|
},
|
|
};
|
|
|
|
static const struct ieee80211_iface_limit ath10k_10x_if_limits[] = {
|
|
{
|
|
.max = 8,
|
|
.types = BIT(NL80211_IFTYPE_AP)
|
|
#ifdef CONFIG_MAC80211_MESH
|
|
| BIT(NL80211_IFTYPE_MESH_POINT)
|
|
#endif
|
|
},
|
|
{
|
|
.max = 1,
|
|
.types = BIT(NL80211_IFTYPE_STATION)
|
|
},
|
|
};
|
|
|
|
static const struct ieee80211_iface_combination ath10k_if_comb[] = {
|
|
{
|
|
.limits = ath10k_if_limits,
|
|
.n_limits = ARRAY_SIZE(ath10k_if_limits),
|
|
.max_interfaces = 8,
|
|
.num_different_channels = 1,
|
|
.beacon_int_infra_match = true,
|
|
},
|
|
};
|
|
|
|
static const struct ieee80211_iface_combination ath10k_10x_if_comb[] = {
|
|
{
|
|
.limits = ath10k_10x_if_limits,
|
|
.n_limits = ARRAY_SIZE(ath10k_10x_if_limits),
|
|
.max_interfaces = 8,
|
|
.num_different_channels = 1,
|
|
.beacon_int_infra_match = true,
|
|
.beacon_int_min_gcd = 1,
|
|
#ifdef CONFIG_ATH10K_DFS_CERTIFIED
|
|
.radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) |
|
|
BIT(NL80211_CHAN_WIDTH_20) |
|
|
BIT(NL80211_CHAN_WIDTH_40) |
|
|
BIT(NL80211_CHAN_WIDTH_80),
|
|
#endif
|
|
},
|
|
};
|
|
|
|
static const struct ieee80211_iface_limit ath10k_tlv_if_limit[] = {
|
|
{
|
|
.max = 2,
|
|
.types = BIT(NL80211_IFTYPE_STATION),
|
|
},
|
|
{
|
|
.max = 2,
|
|
.types = BIT(NL80211_IFTYPE_AP) |
|
|
#ifdef CONFIG_MAC80211_MESH
|
|
BIT(NL80211_IFTYPE_MESH_POINT) |
|
|
#endif
|
|
BIT(NL80211_IFTYPE_P2P_CLIENT) |
|
|
BIT(NL80211_IFTYPE_P2P_GO),
|
|
},
|
|
{
|
|
.max = 1,
|
|
.types = BIT(NL80211_IFTYPE_P2P_DEVICE),
|
|
},
|
|
};
|
|
|
|
static const struct ieee80211_iface_limit ath10k_tlv_qcs_if_limit[] = {
|
|
{
|
|
.max = 2,
|
|
.types = BIT(NL80211_IFTYPE_STATION),
|
|
},
|
|
{
|
|
.max = 2,
|
|
.types = BIT(NL80211_IFTYPE_P2P_CLIENT),
|
|
},
|
|
{
|
|
.max = 1,
|
|
.types = BIT(NL80211_IFTYPE_AP) |
|
|
#ifdef CONFIG_MAC80211_MESH
|
|
BIT(NL80211_IFTYPE_MESH_POINT) |
|
|
#endif
|
|
BIT(NL80211_IFTYPE_P2P_GO),
|
|
},
|
|
{
|
|
.max = 1,
|
|
.types = BIT(NL80211_IFTYPE_P2P_DEVICE),
|
|
},
|
|
};
|
|
|
|
static const struct ieee80211_iface_limit ath10k_tlv_if_limit_ibss[] = {
|
|
{
|
|
.max = 1,
|
|
.types = BIT(NL80211_IFTYPE_STATION),
|
|
},
|
|
{
|
|
.max = 1,
|
|
.types = BIT(NL80211_IFTYPE_ADHOC),
|
|
},
|
|
};
|
|
|
|
/* FIXME: This is not thouroughly tested. These combinations may over- or
|
|
* underestimate hw/fw capabilities.
|
|
*/
|
|
static struct ieee80211_iface_combination ath10k_tlv_if_comb[] = {
|
|
{
|
|
.limits = ath10k_tlv_if_limit,
|
|
.num_different_channels = 1,
|
|
.max_interfaces = 4,
|
|
.n_limits = ARRAY_SIZE(ath10k_tlv_if_limit),
|
|
},
|
|
{
|
|
.limits = ath10k_tlv_if_limit_ibss,
|
|
.num_different_channels = 1,
|
|
.max_interfaces = 2,
|
|
.n_limits = ARRAY_SIZE(ath10k_tlv_if_limit_ibss),
|
|
},
|
|
};
|
|
|
|
static struct ieee80211_iface_combination ath10k_tlv_qcs_if_comb[] = {
|
|
{
|
|
.limits = ath10k_tlv_if_limit,
|
|
.num_different_channels = 1,
|
|
.max_interfaces = 4,
|
|
.n_limits = ARRAY_SIZE(ath10k_tlv_if_limit),
|
|
},
|
|
{
|
|
.limits = ath10k_tlv_qcs_if_limit,
|
|
.num_different_channels = 2,
|
|
.max_interfaces = 4,
|
|
.n_limits = ARRAY_SIZE(ath10k_tlv_qcs_if_limit),
|
|
},
|
|
{
|
|
.limits = ath10k_tlv_if_limit_ibss,
|
|
.num_different_channels = 1,
|
|
.max_interfaces = 2,
|
|
.n_limits = ARRAY_SIZE(ath10k_tlv_if_limit_ibss),
|
|
},
|
|
};
|
|
|
|
static const struct ieee80211_iface_limit ath10k_10_4_if_limits[] = {
|
|
{
|
|
.max = 1,
|
|
.types = BIT(NL80211_IFTYPE_STATION),
|
|
},
|
|
{
|
|
.max = 16,
|
|
.types = BIT(NL80211_IFTYPE_AP)
|
|
#ifdef CONFIG_MAC80211_MESH
|
|
| BIT(NL80211_IFTYPE_MESH_POINT)
|
|
#endif
|
|
},
|
|
};
|
|
|
|
static const struct ieee80211_iface_combination ath10k_10_4_if_comb[] = {
|
|
{
|
|
.limits = ath10k_10_4_if_limits,
|
|
.n_limits = ARRAY_SIZE(ath10k_10_4_if_limits),
|
|
.max_interfaces = 16,
|
|
.num_different_channels = 1,
|
|
.beacon_int_infra_match = true,
|
|
.beacon_int_min_gcd = 1,
|
|
#ifdef CONFIG_ATH10K_DFS_CERTIFIED
|
|
.radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) |
|
|
BIT(NL80211_CHAN_WIDTH_20) |
|
|
BIT(NL80211_CHAN_WIDTH_40) |
|
|
BIT(NL80211_CHAN_WIDTH_80),
|
|
#endif
|
|
},
|
|
};
|
|
|
|
static void ath10k_get_arvif_iter(void *data, u8 *mac,
|
|
struct ieee80211_vif *vif)
|
|
{
|
|
struct ath10k_vif_iter *arvif_iter = data;
|
|
struct ath10k_vif *arvif = (void *)vif->drv_priv;
|
|
|
|
if (arvif->vdev_id == arvif_iter->vdev_id)
|
|
arvif_iter->arvif = arvif;
|
|
}
|
|
|
|
struct ath10k_vif *ath10k_get_arvif(struct ath10k *ar, u32 vdev_id)
|
|
{
|
|
struct ath10k_vif_iter arvif_iter;
|
|
u32 flags;
|
|
|
|
memset(&arvif_iter, 0, sizeof(struct ath10k_vif_iter));
|
|
arvif_iter.vdev_id = vdev_id;
|
|
|
|
flags = IEEE80211_IFACE_ITER_RESUME_ALL;
|
|
ieee80211_iterate_active_interfaces_atomic(ar->hw,
|
|
flags,
|
|
ath10k_get_arvif_iter,
|
|
&arvif_iter);
|
|
if (!arvif_iter.arvif) {
|
|
ath10k_warn(ar, "No VIF found for vdev %d\n", vdev_id);
|
|
return NULL;
|
|
}
|
|
|
|
return arvif_iter.arvif;
|
|
}
|
|
|
|
#define WRD_METHOD "WRDD"
|
|
#define WRDD_WIFI (0x07)
|
|
|
|
static u32 ath10k_mac_wrdd_get_mcc(struct ath10k *ar, union acpi_object *wrdd)
|
|
{
|
|
union acpi_object *mcc_pkg;
|
|
union acpi_object *domain_type;
|
|
union acpi_object *mcc_value;
|
|
u32 i;
|
|
|
|
if (wrdd->type != ACPI_TYPE_PACKAGE ||
|
|
wrdd->package.count < 2 ||
|
|
wrdd->package.elements[0].type != ACPI_TYPE_INTEGER ||
|
|
wrdd->package.elements[0].integer.value != 0) {
|
|
ath10k_warn(ar, "ignoring malformed/unsupported wrdd structure\n");
|
|
return 0;
|
|
}
|
|
|
|
for (i = 1; i < wrdd->package.count; ++i) {
|
|
mcc_pkg = &wrdd->package.elements[i];
|
|
|
|
if (mcc_pkg->type != ACPI_TYPE_PACKAGE)
|
|
continue;
|
|
if (mcc_pkg->package.count < 2)
|
|
continue;
|
|
if (mcc_pkg->package.elements[0].type != ACPI_TYPE_INTEGER ||
|
|
mcc_pkg->package.elements[1].type != ACPI_TYPE_INTEGER)
|
|
continue;
|
|
|
|
domain_type = &mcc_pkg->package.elements[0];
|
|
if (domain_type->integer.value != WRDD_WIFI)
|
|
continue;
|
|
|
|
mcc_value = &mcc_pkg->package.elements[1];
|
|
return mcc_value->integer.value;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_mac_get_wrdd_regulatory(struct ath10k *ar, u16 *rd)
|
|
{
|
|
struct pci_dev __maybe_unused *pdev = to_pci_dev(ar->dev);
|
|
acpi_handle root_handle;
|
|
acpi_handle handle;
|
|
struct acpi_buffer wrdd = {ACPI_ALLOCATE_BUFFER, NULL};
|
|
acpi_status status;
|
|
u32 alpha2_code;
|
|
char alpha2[3];
|
|
|
|
root_handle = ACPI_HANDLE(&pdev->dev);
|
|
if (!root_handle)
|
|
return -EOPNOTSUPP;
|
|
|
|
status = acpi_get_handle(root_handle, (acpi_string)WRD_METHOD, &handle);
|
|
if (ACPI_FAILURE(status)) {
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT,
|
|
"failed to get wrd method %d\n", status);
|
|
return -EIO;
|
|
}
|
|
|
|
status = acpi_evaluate_object(handle, NULL, NULL, &wrdd);
|
|
if (ACPI_FAILURE(status)) {
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT,
|
|
"failed to call wrdc %d\n", status);
|
|
return -EIO;
|
|
}
|
|
|
|
alpha2_code = ath10k_mac_wrdd_get_mcc(ar, wrdd.pointer);
|
|
kfree(wrdd.pointer);
|
|
if (!alpha2_code)
|
|
return -EIO;
|
|
|
|
alpha2[0] = (alpha2_code >> 8) & 0xff;
|
|
alpha2[1] = (alpha2_code >> 0) & 0xff;
|
|
alpha2[2] = '\0';
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT,
|
|
"regulatory hint from WRDD (alpha2-code): %s\n", alpha2);
|
|
|
|
*rd = ath_regd_find_country_by_name(alpha2);
|
|
if (*rd == 0xffff)
|
|
return -EIO;
|
|
|
|
*rd |= COUNTRY_ERD_FLAG;
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_mac_init_rd(struct ath10k *ar)
|
|
{
|
|
int ret;
|
|
u16 rd;
|
|
|
|
ret = ath10k_mac_get_wrdd_regulatory(ar, &rd);
|
|
if (ret) {
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT,
|
|
"fallback to eeprom programmed regulatory settings\n");
|
|
rd = ar->hw_eeprom_rd;
|
|
}
|
|
|
|
ar->ath_common.regulatory.current_rd = rd;
|
|
return 0;
|
|
}
|
|
|
|
int ath10k_mac_register(struct ath10k *ar)
|
|
{
|
|
static const u32 cipher_suites[] = {
|
|
WLAN_CIPHER_SUITE_WEP40,
|
|
WLAN_CIPHER_SUITE_WEP104,
|
|
WLAN_CIPHER_SUITE_TKIP,
|
|
WLAN_CIPHER_SUITE_CCMP,
|
|
|
|
/* Do not add hardware supported ciphers before this line.
|
|
* Allow software encryption for all chips. Don't forget to
|
|
* update n_cipher_suites below.
|
|
*/
|
|
WLAN_CIPHER_SUITE_AES_CMAC,
|
|
WLAN_CIPHER_SUITE_BIP_CMAC_256,
|
|
WLAN_CIPHER_SUITE_BIP_GMAC_128,
|
|
WLAN_CIPHER_SUITE_BIP_GMAC_256,
|
|
|
|
/* Only QCA99x0 and QCA4019 varients support GCMP-128, GCMP-256
|
|
* and CCMP-256 in hardware.
|
|
*/
|
|
WLAN_CIPHER_SUITE_GCMP,
|
|
WLAN_CIPHER_SUITE_GCMP_256,
|
|
WLAN_CIPHER_SUITE_CCMP_256,
|
|
};
|
|
struct ieee80211_supported_band *band;
|
|
void *channels;
|
|
int ret;
|
|
|
|
SET_IEEE80211_PERM_ADDR(ar->hw, ar->mac_addr);
|
|
|
|
SET_IEEE80211_DEV(ar->hw, ar->dev);
|
|
|
|
BUILD_BUG_ON((ARRAY_SIZE(ath10k_2ghz_channels) +
|
|
ARRAY_SIZE(ath10k_5ghz_channels)) !=
|
|
ATH10K_NUM_CHANS);
|
|
|
|
if (ar->phy_capability & WHAL_WLAN_11G_CAPABILITY) {
|
|
channels = kmemdup(ath10k_2ghz_channels,
|
|
sizeof(ath10k_2ghz_channels),
|
|
GFP_KERNEL);
|
|
if (!channels) {
|
|
ret = -ENOMEM;
|
|
goto err_free;
|
|
}
|
|
|
|
band = &ar->mac.sbands[NL80211_BAND_2GHZ];
|
|
band->n_channels = ARRAY_SIZE(ath10k_2ghz_channels);
|
|
band->channels = channels;
|
|
|
|
if (ar->hw_params.cck_rate_map_rev2) {
|
|
band->n_bitrates = ath10k_g_rates_rev2_size;
|
|
band->bitrates = ath10k_g_rates_rev2;
|
|
} else {
|
|
band->n_bitrates = ath10k_g_rates_size;
|
|
band->bitrates = ath10k_g_rates;
|
|
}
|
|
|
|
ar->hw->wiphy->bands[NL80211_BAND_2GHZ] = band;
|
|
}
|
|
|
|
if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY) {
|
|
channels = kmemdup(ath10k_5ghz_channels,
|
|
sizeof(ath10k_5ghz_channels),
|
|
GFP_KERNEL);
|
|
if (!channels) {
|
|
ret = -ENOMEM;
|
|
goto err_free;
|
|
}
|
|
|
|
band = &ar->mac.sbands[NL80211_BAND_5GHZ];
|
|
band->n_channels = ARRAY_SIZE(ath10k_5ghz_channels);
|
|
band->channels = channels;
|
|
band->n_bitrates = ath10k_a_rates_size;
|
|
band->bitrates = ath10k_a_rates;
|
|
ar->hw->wiphy->bands[NL80211_BAND_5GHZ] = band;
|
|
}
|
|
|
|
ath10k_mac_setup_ht_vht_cap(ar);
|
|
|
|
ar->hw->wiphy->interface_modes =
|
|
BIT(NL80211_IFTYPE_STATION) |
|
|
BIT(NL80211_IFTYPE_AP) |
|
|
BIT(NL80211_IFTYPE_MESH_POINT);
|
|
|
|
ar->hw->wiphy->available_antennas_rx = ar->cfg_rx_chainmask;
|
|
ar->hw->wiphy->available_antennas_tx = ar->cfg_tx_chainmask;
|
|
|
|
if (!test_bit(ATH10K_FW_FEATURE_NO_P2P, ar->normal_mode_fw.fw_file.fw_features))
|
|
ar->hw->wiphy->interface_modes |=
|
|
BIT(NL80211_IFTYPE_P2P_DEVICE) |
|
|
BIT(NL80211_IFTYPE_P2P_CLIENT) |
|
|
BIT(NL80211_IFTYPE_P2P_GO);
|
|
|
|
ieee80211_hw_set(ar->hw, SIGNAL_DBM);
|
|
|
|
if (!test_bit(ATH10K_FW_FEATURE_NO_PS,
|
|
ar->running_fw->fw_file.fw_features)) {
|
|
ieee80211_hw_set(ar->hw, SUPPORTS_PS);
|
|
ieee80211_hw_set(ar->hw, SUPPORTS_DYNAMIC_PS);
|
|
}
|
|
|
|
ieee80211_hw_set(ar->hw, MFP_CAPABLE);
|
|
ieee80211_hw_set(ar->hw, REPORTS_TX_ACK_STATUS);
|
|
ieee80211_hw_set(ar->hw, HAS_RATE_CONTROL);
|
|
ieee80211_hw_set(ar->hw, AP_LINK_PS);
|
|
ieee80211_hw_set(ar->hw, SPECTRUM_MGMT);
|
|
ieee80211_hw_set(ar->hw, SUPPORT_FAST_XMIT);
|
|
ieee80211_hw_set(ar->hw, CONNECTION_MONITOR);
|
|
ieee80211_hw_set(ar->hw, SUPPORTS_PER_STA_GTK);
|
|
ieee80211_hw_set(ar->hw, WANT_MONITOR_VIF);
|
|
ieee80211_hw_set(ar->hw, CHANCTX_STA_CSA);
|
|
ieee80211_hw_set(ar->hw, QUEUE_CONTROL);
|
|
ieee80211_hw_set(ar->hw, SUPPORTS_TX_FRAG);
|
|
ieee80211_hw_set(ar->hw, REPORTS_LOW_ACK);
|
|
|
|
if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags))
|
|
ieee80211_hw_set(ar->hw, SW_CRYPTO_CONTROL);
|
|
|
|
ar->hw->wiphy->features |= NL80211_FEATURE_STATIC_SMPS;
|
|
ar->hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
|
|
|
|
if (ar->ht_cap_info & WMI_HT_CAP_DYNAMIC_SMPS)
|
|
ar->hw->wiphy->features |= NL80211_FEATURE_DYNAMIC_SMPS;
|
|
|
|
if (ar->ht_cap_info & WMI_HT_CAP_ENABLED) {
|
|
ieee80211_hw_set(ar->hw, AMPDU_AGGREGATION);
|
|
ieee80211_hw_set(ar->hw, TX_AMPDU_SETUP_IN_HW);
|
|
}
|
|
|
|
ar->hw->wiphy->max_scan_ssids = WLAN_SCAN_PARAMS_MAX_SSID;
|
|
ar->hw->wiphy->max_scan_ie_len = WLAN_SCAN_PARAMS_MAX_IE_LEN;
|
|
|
|
ar->hw->vif_data_size = sizeof(struct ath10k_vif);
|
|
ar->hw->sta_data_size = sizeof(struct ath10k_sta);
|
|
ar->hw->txq_data_size = sizeof(struct ath10k_txq);
|
|
|
|
ar->hw->max_listen_interval = ATH10K_MAX_HW_LISTEN_INTERVAL;
|
|
|
|
if (test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map)) {
|
|
ar->hw->wiphy->flags |= WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD;
|
|
|
|
/* Firmware delivers WPS/P2P Probe Requests frames to driver so
|
|
* that userspace (e.g. wpa_supplicant/hostapd) can generate
|
|
* correct Probe Responses. This is more of a hack advert..
|
|
*/
|
|
ar->hw->wiphy->probe_resp_offload |=
|
|
NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS |
|
|
NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 |
|
|
NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P;
|
|
}
|
|
|
|
if (test_bit(WMI_SERVICE_TDLS, ar->wmi.svc_map) ||
|
|
test_bit(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, ar->wmi.svc_map)) {
|
|
ar->hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS;
|
|
if (test_bit(WMI_SERVICE_TDLS_WIDER_BANDWIDTH, ar->wmi.svc_map))
|
|
ieee80211_hw_set(ar->hw, TDLS_WIDER_BW);
|
|
}
|
|
|
|
if (test_bit(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, ar->wmi.svc_map))
|
|
ieee80211_hw_set(ar->hw, SUPPORTS_TDLS_BUFFER_STA);
|
|
|
|
ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
|
|
ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH;
|
|
ar->hw->wiphy->max_remain_on_channel_duration = 5000;
|
|
|
|
ar->hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD;
|
|
ar->hw->wiphy->features |= NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE |
|
|
NL80211_FEATURE_AP_SCAN;
|
|
|
|
ar->hw->wiphy->max_ap_assoc_sta = ar->max_num_stations;
|
|
|
|
ret = ath10k_wow_init(ar);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to init wow: %d\n", ret);
|
|
goto err_free;
|
|
}
|
|
|
|
wiphy_ext_feature_set(ar->hw->wiphy, NL80211_EXT_FEATURE_VHT_IBSS);
|
|
|
|
/*
|
|
* on LL hardware queues are managed entirely by the FW
|
|
* so we only advertise to mac we can do the queues thing
|
|
*/
|
|
ar->hw->queues = IEEE80211_MAX_QUEUES;
|
|
|
|
/* vdev_ids are used as hw queue numbers. Make sure offchan tx queue is
|
|
* something that vdev_ids can't reach so that we don't stop the queue
|
|
* accidentally.
|
|
*/
|
|
ar->hw->offchannel_tx_hw_queue = IEEE80211_MAX_QUEUES - 1;
|
|
|
|
switch (ar->running_fw->fw_file.wmi_op_version) {
|
|
case ATH10K_FW_WMI_OP_VERSION_MAIN:
|
|
ar->hw->wiphy->iface_combinations = ath10k_if_comb;
|
|
ar->hw->wiphy->n_iface_combinations =
|
|
ARRAY_SIZE(ath10k_if_comb);
|
|
ar->hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC);
|
|
break;
|
|
case ATH10K_FW_WMI_OP_VERSION_TLV:
|
|
if (test_bit(WMI_SERVICE_ADAPTIVE_OCS, ar->wmi.svc_map)) {
|
|
ar->hw->wiphy->iface_combinations =
|
|
ath10k_tlv_qcs_if_comb;
|
|
ar->hw->wiphy->n_iface_combinations =
|
|
ARRAY_SIZE(ath10k_tlv_qcs_if_comb);
|
|
} else {
|
|
ar->hw->wiphy->iface_combinations = ath10k_tlv_if_comb;
|
|
ar->hw->wiphy->n_iface_combinations =
|
|
ARRAY_SIZE(ath10k_tlv_if_comb);
|
|
}
|
|
ar->hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC);
|
|
break;
|
|
case ATH10K_FW_WMI_OP_VERSION_10_1:
|
|
case ATH10K_FW_WMI_OP_VERSION_10_2:
|
|
case ATH10K_FW_WMI_OP_VERSION_10_2_4:
|
|
ar->hw->wiphy->iface_combinations = ath10k_10x_if_comb;
|
|
ar->hw->wiphy->n_iface_combinations =
|
|
ARRAY_SIZE(ath10k_10x_if_comb);
|
|
break;
|
|
case ATH10K_FW_WMI_OP_VERSION_10_4:
|
|
ar->hw->wiphy->iface_combinations = ath10k_10_4_if_comb;
|
|
ar->hw->wiphy->n_iface_combinations =
|
|
ARRAY_SIZE(ath10k_10_4_if_comb);
|
|
break;
|
|
case ATH10K_FW_WMI_OP_VERSION_UNSET:
|
|
case ATH10K_FW_WMI_OP_VERSION_MAX:
|
|
WARN_ON(1);
|
|
ret = -EINVAL;
|
|
goto err_free;
|
|
}
|
|
|
|
if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags))
|
|
ar->hw->netdev_features = NETIF_F_HW_CSUM;
|
|
|
|
if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED)) {
|
|
/* Init ath dfs pattern detector */
|
|
ar->ath_common.debug_mask = ATH_DBG_DFS;
|
|
ar->dfs_detector = dfs_pattern_detector_init(&ar->ath_common,
|
|
NL80211_DFS_UNSET);
|
|
|
|
if (!ar->dfs_detector)
|
|
ath10k_warn(ar, "failed to initialise DFS pattern detector\n");
|
|
}
|
|
|
|
ret = ath10k_mac_init_rd(ar);
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to derive regdom: %d\n", ret);
|
|
goto err_dfs_detector_exit;
|
|
}
|
|
|
|
/* Disable set_coverage_class for chipsets that do not support it. */
|
|
if (!ar->hw_params.hw_ops->set_coverage_class)
|
|
ar->ops->set_coverage_class = NULL;
|
|
|
|
ret = ath_regd_init(&ar->ath_common.regulatory, ar->hw->wiphy,
|
|
ath10k_reg_notifier);
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to initialise regulatory: %i\n", ret);
|
|
goto err_dfs_detector_exit;
|
|
}
|
|
|
|
if (test_bit(WMI_SERVICE_SPOOF_MAC_SUPPORT, ar->wmi.svc_map)) {
|
|
ret = ath10k_wmi_scan_prob_req_oui(ar, ar->mac_addr);
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to set prob req oui: %i\n", ret);
|
|
goto err_dfs_detector_exit;
|
|
}
|
|
|
|
ar->hw->wiphy->features |=
|
|
NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR;
|
|
}
|
|
|
|
ar->hw->wiphy->cipher_suites = cipher_suites;
|
|
|
|
/* QCA988x and QCA6174 family chips do not support CCMP-256, GCMP-128
|
|
* and GCMP-256 ciphers in hardware. Fetch number of ciphers supported
|
|
* from chip specific hw_param table.
|
|
*/
|
|
if (!ar->hw_params.n_cipher_suites ||
|
|
ar->hw_params.n_cipher_suites > ARRAY_SIZE(cipher_suites)) {
|
|
ath10k_err(ar, "invalid hw_params.n_cipher_suites %d\n",
|
|
ar->hw_params.n_cipher_suites);
|
|
ar->hw_params.n_cipher_suites = 8;
|
|
}
|
|
ar->hw->wiphy->n_cipher_suites = ar->hw_params.n_cipher_suites;
|
|
|
|
wiphy_ext_feature_set(ar->hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);
|
|
|
|
ret = ieee80211_register_hw(ar->hw);
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to register ieee80211: %d\n", ret);
|
|
goto err_dfs_detector_exit;
|
|
}
|
|
|
|
if (!ath_is_world_regd(&ar->ath_common.regulatory)) {
|
|
ret = regulatory_hint(ar->hw->wiphy,
|
|
ar->ath_common.regulatory.alpha2);
|
|
if (ret)
|
|
goto err_unregister;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_unregister:
|
|
ieee80211_unregister_hw(ar->hw);
|
|
|
|
err_dfs_detector_exit:
|
|
if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector)
|
|
ar->dfs_detector->exit(ar->dfs_detector);
|
|
|
|
err_free:
|
|
kfree(ar->mac.sbands[NL80211_BAND_2GHZ].channels);
|
|
kfree(ar->mac.sbands[NL80211_BAND_5GHZ].channels);
|
|
|
|
SET_IEEE80211_DEV(ar->hw, NULL);
|
|
return ret;
|
|
}
|
|
|
|
void ath10k_mac_unregister(struct ath10k *ar)
|
|
{
|
|
ieee80211_unregister_hw(ar->hw);
|
|
|
|
if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector)
|
|
ar->dfs_detector->exit(ar->dfs_detector);
|
|
|
|
kfree(ar->mac.sbands[NL80211_BAND_2GHZ].channels);
|
|
kfree(ar->mac.sbands[NL80211_BAND_5GHZ].channels);
|
|
|
|
SET_IEEE80211_DEV(ar->hw, NULL);
|
|
}
|