linux/drivers/media/usb/dvb-usb/gp8psk.c

// SPDX-License-Identifier: GPL-2.0-only
/* DVB USB compliant Linux driver for the
 *  - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module
 *
 * Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com)
 * Copyright (C) 2006,2007 Genpix Electronics (genpix@genpix-electronics.com)
 *
 * Thanks to GENPIX for the sample code used to implement this module.
 *
 * This module is based off the vp7045 and vp702x modules
 *
 * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
 */
#include "gp8psk.h"
#include "gp8psk-fe.h"

/* debug */
static char bcm4500_firmware[] = "dvb-usb-gp8psk-02.fw";
int dvb_usb_gp8psk_debug;
module_param_named(debug,dvb_usb_gp8psk_debug, int, 0644);
MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS);

DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);

struct gp8psk_state {
	unsigned char data[80];
};

static int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value,
			    u16 index, u8 *b, int blen)
{
	struct gp8psk_state *st = d->priv;
	int ret = 0,try = 0;

	if (blen > sizeof(st->data))
		return -EIO;

	if ((ret = mutex_lock_interruptible(&d->usb_mutex)))
		return ret;

	while (ret >= 0 && ret != blen && try < 3) {
		ret = usb_control_msg(d->udev,
			usb_rcvctrlpipe(d->udev,0),
			req,
			USB_TYPE_VENDOR | USB_DIR_IN,
			value, index, st->data, blen,
			2000);
		deb_info("reading number %d (ret: %d)\n",try,ret);
		try++;
	}

	if (ret < 0 || ret != blen) {
		warn("usb in %d operation failed.", req);
		ret = -EIO;
	} else {
		ret = 0;
		memcpy(b, st->data, blen);
	}

	deb_xfer("in: req. %x, val: %x, ind: %x, buffer: ",req,value,index);
	debug_dump(b,blen,deb_xfer);

	mutex_unlock(&d->usb_mutex);

	return ret;
}

static int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,
			     u16 index, u8 *b, int blen)
{
	struct gp8psk_state *st = d->priv;
	int ret;

	deb_xfer("out: req. %x, val: %x, ind: %x, buffer: ",req,value,index);
	debug_dump(b,blen,deb_xfer);

	if (blen > sizeof(st->data))
		return -EIO;

	if ((ret = mutex_lock_interruptible(&d->usb_mutex)))
		return ret;

	memcpy(st->data, b, blen);
	if (usb_control_msg(d->udev,
			usb_sndctrlpipe(d->udev,0),
			req,
			USB_TYPE_VENDOR | USB_DIR_OUT,
			value, index, st->data, blen,
			2000) != blen) {
		warn("usb out operation failed.");
		ret = -EIO;
	} else
		ret = 0;
	mutex_unlock(&d->usb_mutex);

	return ret;
}


static int gp8psk_get_fw_version(struct dvb_usb_device *d, u8 *fw_vers)
{
	return gp8psk_usb_in_op(d, GET_FW_VERS, 0, 0, fw_vers, 6);
}

static int gp8psk_get_fpga_version(struct dvb_usb_device *d, u8 *fpga_vers)
{
	return gp8psk_usb_in_op(d, GET_FPGA_VERS, 0, 0, fpga_vers, 1);
}

static void gp8psk_info(struct dvb_usb_device *d)
{
	u8 fpga_vers, fw_vers[6];

	if (!gp8psk_get_fw_version(d, fw_vers))
		info("FW Version = %i.%02i.%i (0x%x)  Build %4i/%02i/%02i",
		fw_vers[2], fw_vers[1], fw_vers[0], GP8PSK_FW_VERS(fw_vers),
		2000 + fw_vers[5], fw_vers[4], fw_vers[3]);
	else
		info("failed to get FW version");

	if (!gp8psk_get_fpga_version(d, &fpga_vers))
		info("FPGA Version = %i", fpga_vers);
	else
		info("failed to get FPGA version");
}

static int gp8psk_load_bcm4500fw(struct dvb_usb_device *d)
{
	int ret;
	const struct firmware *fw = NULL;
	const u8 *ptr;
	u8 *buf;
	if ((ret = request_firmware(&fw, bcm4500_firmware,
					&d->udev->dev)) != 0) {
		err("did not find the bcm4500 firmware file '%s' (status %d). You can use <kernel_dir>/scripts/get_dvb_firmware to get the firmware",
			bcm4500_firmware,ret);
		return ret;
	}

	ret = -EINVAL;

	if (gp8psk_usb_out_op(d, LOAD_BCM4500,1,0,NULL, 0))
		goto out_rel_fw;

	info("downloading bcm4500 firmware from file '%s'",bcm4500_firmware);

	ptr = fw->data;
	buf = kmalloc(64, GFP_KERNEL);
	if (!buf) {
		ret = -ENOMEM;
		goto out_rel_fw;
	}

	while (ptr[0] != 0xff) {
		u16 buflen = ptr[0] + 4;
		if (ptr + buflen >= fw->data + fw->size) {
			err("failed to load bcm4500 firmware.");
			goto out_free;
		}
		if (buflen > 64) {
			err("firmware chunk size bigger than 64 bytes.");
			goto out_free;
		}

		memcpy(buf, ptr, buflen);
		if (dvb_usb_generic_write(d, buf, buflen)) {
			err("failed to load bcm4500 firmware.");
			goto out_free;
		}
		ptr += buflen;
	}

	ret = 0;

out_free:
	kfree(buf);
out_rel_fw:
	release_firmware(fw);

	return ret;
}

static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff)
{
	u8 status, buf;
	int gp_product_id = le16_to_cpu(d->udev->descriptor.idProduct);

	if (onoff) {
		gp8psk_usb_in_op(d, GET_8PSK_CONFIG,0,0,&status,1);
		if (! (status & bm8pskStarted)) {  /* started */
			if(gp_product_id == USB_PID_GENPIX_SKYWALKER_CW3K)
				gp8psk_usb_out_op(d, CW3K_INIT, 1, 0, NULL, 0);
			if (gp8psk_usb_in_op(d, BOOT_8PSK, 1, 0, &buf, 1))
				return -EINVAL;
			gp8psk_info(d);
		}

		if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
			if (! (status & bm8pskFW_Loaded)) /* BCM4500 firmware loaded */
				if(gp8psk_load_bcm4500fw(d))
					return -EINVAL;

		if (! (status & bmIntersilOn)) /* LNB Power */
			if (gp8psk_usb_in_op(d, START_INTERSIL, 1, 0,
					&buf, 1))
				return -EINVAL;

		/* Set DVB mode to 1 */
		if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
			if (gp8psk_usb_out_op(d, SET_DVB_MODE, 1, 0, NULL, 0))
				return -EINVAL;
		/* Abort possible TS (if previous tune crashed) */
		if (gp8psk_usb_out_op(d, ARM_TRANSFER, 0, 0, NULL, 0))
			return -EINVAL;
	} else {
		/* Turn off LNB power */
		if (gp8psk_usb_in_op(d, START_INTERSIL, 0, 0, &buf, 1))
			return -EINVAL;
		/* Turn off 8psk power */
		if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1))
			return -EINVAL;
		if(gp_product_id == USB_PID_GENPIX_SKYWALKER_CW3K)
			gp8psk_usb_out_op(d, CW3K_INIT, 0, 0, NULL, 0);
	}
	return 0;
}

static int gp8psk_bcm4500_reload(struct dvb_usb_device *d)
{
	u8 buf;
	int gp_product_id = le16_to_cpu(d->udev->descriptor.idProduct);

	deb_xfer("reloading firmware\n");

	/* Turn off 8psk power */
	if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1))
		return -EINVAL;
	/* Turn On 8psk power */
	if (gp8psk_usb_in_op(d, BOOT_8PSK, 1, 0, &buf, 1))
		return -EINVAL;
	/* load BCM4500 firmware */
	if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
		if (gp8psk_load_bcm4500fw(d))
			return -EINVAL;
	return 0;
}

static int gp8psk_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
{
	return gp8psk_usb_out_op(adap->dev, ARM_TRANSFER, onoff, 0 , NULL, 0);
}

/* Callbacks for gp8psk-fe.c */

static int gp8psk_fe_in(void *priv, u8 req, u16 value,
			    u16 index, u8 *b, int blen)
{
	struct dvb_usb_device *d = priv;

	return gp8psk_usb_in_op(d, req, value, index, b, blen);
}

static int gp8psk_fe_out(void *priv, u8 req, u16 value,
			    u16 index, u8 *b, int blen)
{
	struct dvb_usb_device *d = priv;

	return gp8psk_usb_out_op(d, req, value, index, b, blen);
}

static int gp8psk_fe_reload(void *priv)
{
	struct dvb_usb_device *d = priv;

	return gp8psk_bcm4500_reload(d);
}

static const struct gp8psk_fe_ops gp8psk_fe_ops = {
	.in = gp8psk_fe_in,
	.out = gp8psk_fe_out,
	.reload = gp8psk_fe_reload,
};

static int gp8psk_frontend_attach(struct dvb_usb_adapter *adap)
{
	struct dvb_usb_device *d = adap->dev;
	int id = le16_to_cpu(d->udev->descriptor.idProduct);
	int is_rev1;

	is_rev1 = (id == USB_PID_GENPIX_8PSK_REV_1_WARM) ? true : false;

	adap->fe_adap[0].fe = dvb_attach(gp8psk_fe_attach,
					 &gp8psk_fe_ops, d, is_rev1);
	return 0;
}

static struct dvb_usb_device_properties gp8psk_properties;

static int gp8psk_usb_probe(struct usb_interface *intf,
		const struct usb_device_id *id)
{
	int ret;
	struct usb_device *udev = interface_to_usbdev(intf);
	ret = dvb_usb_device_init(intf, &gp8psk_properties,
				  THIS_MODULE, NULL, adapter_nr);
	if (ret == 0) {
		info("found Genpix USB device pID = %x (hex)",
			le16_to_cpu(udev->descriptor.idProduct));
	}
	return ret;
}

static struct usb_device_id gp8psk_usb_table [] = {
	    { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_1_COLD) },
	    { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_1_WARM) },
	    { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_2) },
	    { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_1) },
	    { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_2) },
/*	    { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_CW3K) }, */
	    { 0 },
};
MODULE_DEVICE_TABLE(usb, gp8psk_usb_table);

static struct dvb_usb_device_properties gp8psk_properties = {
	.usb_ctrl = CYPRESS_FX2,
	.firmware = "dvb-usb-gp8psk-01.fw",

	.size_of_priv = sizeof(struct gp8psk_state),

	.num_adapters = 1,
	.adapter = {
		{
		.num_frontends = 1,
		.fe = {{
			.streaming_ctrl   = gp8psk_streaming_ctrl,
			.frontend_attach  = gp8psk_frontend_attach,
			/* parameter for the MPEG2-data transfer */
			.stream = {
				.type = USB_BULK,
				.count = 7,
				.endpoint = 0x82,
				.u = {
					.bulk = {
						.buffersize = 8192,
					}
				}
			},
		}},
		}
	},
	.power_ctrl       = gp8psk_power_ctrl,

	.generic_bulk_ctrl_endpoint = 0x01,

	.num_device_descs = 4,
	.devices = {
		{ .name = "Genpix 8PSK-to-USB2 Rev.1 DVB-S receiver",
		  .cold_ids = { &gp8psk_usb_table[0], NULL },
		  .warm_ids = { &gp8psk_usb_table[1], NULL },
		},
		{ .name = "Genpix 8PSK-to-USB2 Rev.2 DVB-S receiver",
		  .cold_ids = { NULL },
		  .warm_ids = { &gp8psk_usb_table[2], NULL },
		},
		{ .name = "Genpix SkyWalker-1 DVB-S receiver",
		  .cold_ids = { NULL },
		  .warm_ids = { &gp8psk_usb_table[3], NULL },
		},
		{ .name = "Genpix SkyWalker-2 DVB-S receiver",
		  .cold_ids = { NULL },
		  .warm_ids = { &gp8psk_usb_table[4], NULL },
		},
		{ NULL },
	}
};

/* usb specific object needed to register this driver with the usb subsystem */
static struct usb_driver gp8psk_usb_driver = {
	.name		= "dvb_usb_gp8psk",
	.probe		= gp8psk_usb_probe,
	.disconnect = dvb_usb_device_exit,
	.id_table	= gp8psk_usb_table,
};

module_usb_driver(gp8psk_usb_driver);

MODULE_AUTHOR("Alan Nisota <alannisota@gamil.com>");
MODULE_DESCRIPTION("Driver for Genpix DVB-S");
MODULE_VERSION("1.1");
MODULE_LICENSE("GPL");