mirror of
https://github.com/torvalds/linux.git
synced 2024-12-20 01:52:13 +00:00
3d7b75fdae
Document what I've learned so far about the gmux so that we can collaboratively reverse-engineer its remaining unknown bits without everyone having to start from scratch. The DOC sections are bound together in the gpu.tmpl DocBook under a new vga_switcheroo "Handlers" chapter. Eventually this should be amended with documentation about the four other handlers that exist so far (nouveau v1 DSM, nouveau Optimus DSM, radeon ATPX, amdgpu ATPX). Requires kernel-doc with asciidoc support. The EFI variable was reverse-engineered by Bruno Bierbaumer <bruno@bierbaumer.net> and Andreas Heider <andreas@meetr.de>. Some of the remaining open questions: * How are vblank intervals synchronized on retinas to achieve seamless switching? Is the DP mux capable of this? It's not mentioned in the data sheets. Or is it done at the OS level, i.e. do we have to synchronize vblank intervals between DRM drivers? There's a signal coming from the panel connector and going into gmux, could this be the vblank signal as received by the panel to properly time the switch? * On retinas there's an I2C bus between gmux and the connector of the right I/O board, apparently leading to the Parade PS8401A HDMI repeater. What is this for, is it controlled via gmux registers? Data sheet: http://www.paradetech.com/products/jitter-cleaning-repeaters/ps8401/ * On retinas there's an I2C bus between gmux and the LED driver. Pre-retinas connected the LED driver to SMBUS. Are there additional gmux registers on retinas to control it? * The MacPro6,1 2013 also has a gmux, the same Renesas R4F2113 as the retina MacBook Pro. The Mac Pro doesn't have a built-in display, so what is its purpose? Power control of the dual FirePro GPUs? Switching of the external DP/Thunderbolt ports? The iFixit teardown clearly shows one TI HD3SS212 DisplayPort mux on the logic board next to one of the three Thunderbolt controllers. However six muxes would be necessary to switch all six ports between GPUs. The mux is probably necessary for one of the display configurations allowed by Apple, but which one? https://www.ifixit.com/Teardown/Mac+Pro+Late+2013+Teardown/20778 https://d3nevzfk7ii3be.cloudfront.net/igi/fELBTnt31QhnDsqq.huge https://support.apple.com/en-us/HT202801 * Registers we haven't decoded yet: 0x700 32 Bit configmap? 0x708 32 Bit power sequence? 0x712 8 Bit status of clock from panel on retinas? 0x713 8 Bit dito? 0x724 16 Bit backlight, raw value? 0x760 32 Bit backlight 0x764 32 Bit backlight 0x768 8 Bit backlight 0x76a 16 Bit backlight 0x76c 16 Bit backlight 0x76e 16 Bit backlight 0x77f edp/dp/hdmi probe? retina only. * Addition by Bruno Prémont <bonbons@linux-vserver.org>: "Missing is also precise knowledge as to what the gmux depends on. From behavioral reports, it is somehow sensitive to VGA IO/MEM routing (it apparently needs the routing to go to integrated GPU, not discrete GPU). When the routing is inappropriate backlight control IO just reads back as 0xFF (and eventually gmux IO in general does so)." Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Darren Hart <dvhart@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/da309e436fbeac886477d80376457b7d83ea4b2d.1452431795.git.lukas@wunner.de Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> |
||
|---|---|---|
| .. | ||
| chrome | ||
| goldfish | ||
| mips | ||
| olpc | ||
| x86 | ||
| Kconfig | ||
| Makefile | ||