linux/drivers/pinctrl/actions/pinctrl-owl.h
Saravanan Sekar f3f7af952a pinctrl: actions: define pad control configurtion to SoC specific
pad control for s900 and s700 are differs in number of
pull control configuraions
s900 has 4 pull controls - high impedence, pull up, pull down, repeater
s700, s500 has 2 pull controls - pull up and pull down

so pad control configuration has to SoC specific, moved out from pinctrl
common to s900 specific.

Signed-off-by: Parthiban Nallathambi <pn@denx.de>
Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-11-19 14:11:16 +01:00

313 lines
8.0 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* OWL SoC's Pinctrl definitions
*
* Copyright (c) 2014 Actions Semi Inc.
* Author: David Liu <liuwei@actions-semi.com>
*
* Copyright (c) 2018 Linaro Ltd.
* Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
*/
#ifndef __PINCTRL_OWL_H__
#define __PINCTRL_OWL_H__
#define OWL_PINCONF_SLEW_SLOW 0
#define OWL_PINCONF_SLEW_FAST 1
#define MUX_PG(group_name, reg, shift, width) \
{ \
.name = #group_name, \
.pads = group_name##_pads, \
.npads = ARRAY_SIZE(group_name##_pads), \
.funcs = group_name##_funcs, \
.nfuncs = ARRAY_SIZE(group_name##_funcs), \
.mfpctl_reg = MFCTL##reg, \
.mfpctl_shift = shift, \
.mfpctl_width = width, \
.drv_reg = -1, \
.drv_shift = -1, \
.drv_width = -1, \
.sr_reg = -1, \
.sr_shift = -1, \
.sr_width = -1, \
}
#define DRV_PG(group_name, reg, shift, width) \
{ \
.name = #group_name, \
.pads = group_name##_pads, \
.npads = ARRAY_SIZE(group_name##_pads), \
.mfpctl_reg = -1, \
.mfpctl_shift = -1, \
.mfpctl_width = -1, \
.drv_reg = PAD_DRV##reg, \
.drv_shift = shift, \
.drv_width = width, \
.sr_reg = -1, \
.sr_shift = -1, \
.sr_width = -1, \
}
#define SR_PG(group_name, reg, shift, width) \
{ \
.name = #group_name, \
.pads = group_name##_pads, \
.npads = ARRAY_SIZE(group_name##_pads), \
.mfpctl_reg = -1, \
.mfpctl_shift = -1, \
.mfpctl_width = -1, \
.drv_reg = -1, \
.drv_shift = -1, \
.drv_width = -1, \
.sr_reg = PAD_SR##reg, \
.sr_shift = shift, \
.sr_width = width, \
}
#define FUNCTION(fname) \
{ \
.name = #fname, \
.groups = fname##_groups, \
.ngroups = ARRAY_SIZE(fname##_groups), \
}
/* PAD PULL UP/DOWN CONFIGURES */
#define PULLCTL_CONF(pull_reg, pull_sft, pull_wdt) \
{ \
.reg = PAD_PULLCTL##pull_reg, \
.shift = pull_sft, \
.width = pull_wdt, \
}
#define PAD_PULLCTL_CONF(pad_name, pull_reg, pull_sft, pull_wdt) \
struct owl_pullctl pad_name##_pullctl_conf \
= PULLCTL_CONF(pull_reg, pull_sft, pull_wdt)
#define ST_CONF(st_reg, st_sft, st_wdt) \
{ \
.reg = PAD_ST##st_reg, \
.shift = st_sft, \
.width = st_wdt, \
}
#define PAD_ST_CONF(pad_name, st_reg, st_sft, st_wdt) \
struct owl_st pad_name##_st_conf \
= ST_CONF(st_reg, st_sft, st_wdt)
#define PAD_INFO(name) \
{ \
.pad = name, \
.pullctl = NULL, \
.st = NULL, \
}
#define PAD_INFO_ST(name) \
{ \
.pad = name, \
.pullctl = NULL, \
.st = &name##_st_conf, \
}
#define PAD_INFO_PULLCTL(name) \
{ \
.pad = name, \
.pullctl = &name##_pullctl_conf, \
.st = NULL, \
}
#define PAD_INFO_PULLCTL_ST(name) \
{ \
.pad = name, \
.pullctl = &name##_pullctl_conf, \
.st = &name##_st_conf, \
}
#define OWL_GPIO_PORT_A 0
#define OWL_GPIO_PORT_B 1
#define OWL_GPIO_PORT_C 2
#define OWL_GPIO_PORT_D 3
#define OWL_GPIO_PORT_E 4
#define OWL_GPIO_PORT_F 5
#define OWL_GPIO_PORT(port, base, count, _outen, _inen, _dat, _intc_ctl,\
_intc_pd, _intc_msk, _intc_type, _share) \
[OWL_GPIO_PORT_##port] = { \
.offset = base, \
.pins = count, \
.outen = _outen, \
.inen = _inen, \
.dat = _dat, \
.intc_ctl = _intc_ctl, \
.intc_pd = _intc_pd, \
.intc_msk = _intc_msk, \
.intc_type = _intc_type, \
.shared_ctl_offset = _share, \
}
enum owl_pinconf_drv {
OWL_PINCONF_DRV_2MA,
OWL_PINCONF_DRV_4MA,
OWL_PINCONF_DRV_8MA,
OWL_PINCONF_DRV_12MA,
};
/* GPIO CTRL Bit Definition */
#define OWL_GPIO_CTLR_PENDING 0
#define OWL_GPIO_CTLR_ENABLE 1
#define OWL_GPIO_CTLR_SAMPLE_CLK_24M 2
/* GPIO TYPE Bit Definition */
#define OWL_GPIO_INT_LEVEL_HIGH 0
#define OWL_GPIO_INT_LEVEL_LOW 1
#define OWL_GPIO_INT_EDGE_RISING 2
#define OWL_GPIO_INT_EDGE_FALLING 3
#define OWL_GPIO_INT_MASK 3
/**
* struct owl_pullctl - Actions pad pull control register
* @reg: offset to the pull control register
* @shift: shift value of the register
* @width: width of the register
*/
struct owl_pullctl {
int reg;
unsigned int shift;
unsigned int width;
};
/**
* struct owl_st - Actions pad schmitt trigger enable register
* @reg: offset to the schmitt trigger enable register
* @shift: shift value of the register
* @width: width of the register
*/
struct owl_st {
int reg;
unsigned int shift;
unsigned int width;
};
/**
* struct owl_pingroup - Actions pingroup definition
* @name: name of the pin group
* @pads: list of pins assigned to this pingroup
* @npads: size of @pads array
* @funcs: list of pinmux functions for this pingroup
* @nfuncs: size of @funcs array
* @mfpctl_reg: multiplexing control register offset
* @mfpctl_shift: multiplexing control register bit mask
* @mfpctl_width: multiplexing control register width
* @drv_reg: drive control register offset
* @drv_shift: drive control register bit mask
* @drv_width: driver control register width
* @sr_reg: slew rate control register offset
* @sr_shift: slew rate control register bit mask
* @sr_width: slew rate control register width
*/
struct owl_pingroup {
const char *name;
unsigned int *pads;
unsigned int npads;
unsigned int *funcs;
unsigned int nfuncs;
int mfpctl_reg;
unsigned int mfpctl_shift;
unsigned int mfpctl_width;
int drv_reg;
unsigned int drv_shift;
unsigned int drv_width;
int sr_reg;
unsigned int sr_shift;
unsigned int sr_width;
};
/**
* struct owl_padinfo - Actions pinctrl pad info
* @pad: pad name of the SoC
* @pullctl: pull control register info
* @st: schmitt trigger register info
*/
struct owl_padinfo {
int pad;
struct owl_pullctl *pullctl;
struct owl_st *st;
};
/**
* struct owl_pinmux_func - Actions pinctrl mux functions
* @name: name of the pinmux function.
* @groups: array of pin groups that may select this function.
* @ngroups: number of entries in @groups.
*/
struct owl_pinmux_func {
const char *name;
const char * const *groups;
unsigned int ngroups;
};
/**
* struct owl_gpio_port - Actions GPIO port info
* @offset: offset of the GPIO port.
* @pins: number of pins belongs to the GPIO port.
* @outen: offset of the output enable register.
* @inen: offset of the input enable register.
* @dat: offset of the data register.
* @intc_ctl: offset of the interrupt control register.
* @intc_pd: offset of the interrupt pending register.
* @intc_msk: offset of the interrupt mask register.
* @intc_type: offset of the interrupt type register.
*/
struct owl_gpio_port {
unsigned int offset;
unsigned int pins;
unsigned int outen;
unsigned int inen;
unsigned int dat;
unsigned int intc_ctl;
unsigned int intc_pd;
unsigned int intc_msk;
unsigned int intc_type;
u8 shared_ctl_offset;
};
/**
* struct owl_pinctrl_soc_data - Actions pin controller driver configuration
* @pins: array describing all pins of the pin controller.
* @npins: number of entries in @pins.
* @functions: array describing all mux functions of this SoC.
* @nfunction: number of entries in @functions.
* @groups: array describing all pin groups of this SoC.
* @ngroups: number of entries in @groups.
* @padinfo: array describing the pad info of this SoC.
* @ngpios: number of pingroups the driver should expose as GPIOs.
* @ports: array describing all GPIO ports of this SoC.
* @nports: number of GPIO ports in this SoC.
*/
struct owl_pinctrl_soc_data {
const struct pinctrl_pin_desc *pins;
unsigned int npins;
const struct owl_pinmux_func *functions;
unsigned int nfunctions;
const struct owl_pingroup *groups;
unsigned int ngroups;
const struct owl_padinfo *padinfo;
unsigned int ngpios;
const struct owl_gpio_port *ports;
unsigned int nports;
int (*padctl_val2arg)(const struct owl_padinfo *padinfo,
unsigned int param,
u32 *arg);
int (*padctl_arg2val)(const struct owl_padinfo *info,
unsigned int param,
u32 *arg);
};
int owl_pinctrl_probe(struct platform_device *pdev,
struct owl_pinctrl_soc_data *soc_data);
#endif /* __PINCTRL_OWL_H__ */