mirror of
https://github.com/torvalds/linux.git
synced 2024-12-20 18:11:47 +00:00
a59be0811c
This happens with devices using a regulatory domain 0x68 that are only 5Ghz capable because ath_reg_apply_active_scan_flags assumes that we always have a 2,4Ghz band. CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 82cd838c, ra == 82cd8384 Oops[#1]: Cpu 0 $ 0 : 00000000 00000061 00000003 00000024 $ 4 : 00000003 000016c1 82f900ac 00000024 $ 8 : 00000000 82cda304 0058bad8 00000005 $12 : 005908f8 001e8481 00000003 1dcd6500 $16 : 00000002 00000000 82c700c0 82c700c0 $20 : 82d415e4 82c70d64 82c70200 82c715bc $24 : 00000000 11e1a300 $28 : 82ce2000 82ce3c70 82c715a8 82cd8384 Hi : 00000000 Lo : 0000001e epc : 82cd838c ath_reg_apply_world_flags+0x78/0x17c [ath] Not tainted ra : 82cd8384 ath_reg_apply_world_flags+0x70/0x17c [ath] Status: 1000d403 KERNEL EXL IE Cause : 80800008 BadVA : 00000000 PrId : 00019374 (MIPS 24Kc) Modules linked in: ath9k(+) ath9k_common ath9k_hw ath mac80211 cfg80211 compat_firmware_class compat arc4 aes_generic deflate ecb cbc leds_gpio button_hotplug gpio_buttons input_polldev ie Process insmod (pid: 464, threadinfo=82ce2000, task=838b31d8, tls=00000000) Stack : 00000000 00000002 82f900ac 82c700c0 82d415e4 82c70d64 00000000 00000068 82f900ac 82cd88f4 82c700c0 82cda304 00000001 000020f0 82f90000 82c70d40 00000002 82f90000 82f900ac 82d4207c 82d518a0 00000002 7fee6118 8017c0d8 00000008 8397ba00 82c70d40 00000000 82c70200 83813000 83813058 b0010000 82d518a0 00000002 7fee6118 82d4b8c8 83445cc0 80120dc0 83804000 800eeda0 ... Call Trace: [<82cd838c>] ath_reg_apply_world_flags+0x78/0x17c [ath] [<82cd88f4>] ath_regd_init+0x464/0x488 [ath] [<82d4207c>] ath9k_init_device+0x6a4/0x6b4 [ath9k] [<82d4b8c8>] ath_pci_probe+0x27c/0x358 [ath9k] [<80181de0>] pci_device_probe+0x64/0xa4 [<8019e874>] driver_probe_device+0xb8/0x190 [<8019e9b8>] __driver_attach+0x6c/0xa4 [<8019dfc0>] bus_for_each_dev+0x60/0xb0 [<8019d744>] bus_add_driver+0xc4/0x25c [<8019ed6c>] driver_register+0xe0/0x198 [<8018206c>] __pci_register_driver+0x50/0xe0 [<82dd0010>] ath9k_init+0x10/0x54 [ath9k] [<8006b4a0>] do_one_initcall+0x68/0x1ec [<800a901c>] sys_init_module+0xec/0x23c [<80062544>] stack_done+0x20/0x3c Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
609 lines
16 KiB
C
609 lines
16 KiB
C
/*
|
|
* Copyright (c) 2008-2009 Atheros Communications Inc.
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <net/cfg80211.h>
|
|
#include <net/mac80211.h>
|
|
#include "regd.h"
|
|
#include "regd_common.h"
|
|
|
|
/*
|
|
* This is a set of common rules used by our world regulatory domains.
|
|
* We have 12 world regulatory domains. To save space we consolidate
|
|
* the regulatory domains in 5 structures by frequency and change
|
|
* the flags on our reg_notifier() on a case by case basis.
|
|
*/
|
|
|
|
/* Only these channels all allow active scan on all world regulatory domains */
|
|
#define ATH9K_2GHZ_CH01_11 REG_RULE(2412-10, 2462+10, 40, 0, 20, 0)
|
|
|
|
/* We enable active scan on these a case by case basis by regulatory domain */
|
|
#define ATH9K_2GHZ_CH12_13 REG_RULE(2467-10, 2472+10, 40, 0, 20,\
|
|
NL80211_RRF_PASSIVE_SCAN)
|
|
#define ATH9K_2GHZ_CH14 REG_RULE(2484-10, 2484+10, 40, 0, 20,\
|
|
NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_OFDM)
|
|
|
|
/* We allow IBSS on these on a case by case basis by regulatory domain */
|
|
#define ATH9K_5GHZ_5150_5350 REG_RULE(5150-10, 5350+10, 40, 0, 30,\
|
|
NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_IBSS)
|
|
#define ATH9K_5GHZ_5470_5850 REG_RULE(5470-10, 5850+10, 40, 0, 30,\
|
|
NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_IBSS)
|
|
#define ATH9K_5GHZ_5725_5850 REG_RULE(5725-10, 5850+10, 40, 0, 30,\
|
|
NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_IBSS)
|
|
|
|
#define ATH9K_2GHZ_ALL ATH9K_2GHZ_CH01_11, \
|
|
ATH9K_2GHZ_CH12_13, \
|
|
ATH9K_2GHZ_CH14
|
|
|
|
#define ATH9K_5GHZ_ALL ATH9K_5GHZ_5150_5350, \
|
|
ATH9K_5GHZ_5470_5850
|
|
|
|
/* This one skips what we call "mid band" */
|
|
#define ATH9K_5GHZ_NO_MIDBAND ATH9K_5GHZ_5150_5350, \
|
|
ATH9K_5GHZ_5725_5850
|
|
|
|
/* Can be used for:
|
|
* 0x60, 0x61, 0x62 */
|
|
static const struct ieee80211_regdomain ath_world_regdom_60_61_62 = {
|
|
.n_reg_rules = 5,
|
|
.alpha2 = "99",
|
|
.reg_rules = {
|
|
ATH9K_2GHZ_ALL,
|
|
ATH9K_5GHZ_ALL,
|
|
}
|
|
};
|
|
|
|
/* Can be used by 0x63 and 0x65 */
|
|
static const struct ieee80211_regdomain ath_world_regdom_63_65 = {
|
|
.n_reg_rules = 4,
|
|
.alpha2 = "99",
|
|
.reg_rules = {
|
|
ATH9K_2GHZ_CH01_11,
|
|
ATH9K_2GHZ_CH12_13,
|
|
ATH9K_5GHZ_NO_MIDBAND,
|
|
}
|
|
};
|
|
|
|
/* Can be used by 0x64 only */
|
|
static const struct ieee80211_regdomain ath_world_regdom_64 = {
|
|
.n_reg_rules = 3,
|
|
.alpha2 = "99",
|
|
.reg_rules = {
|
|
ATH9K_2GHZ_CH01_11,
|
|
ATH9K_5GHZ_NO_MIDBAND,
|
|
}
|
|
};
|
|
|
|
/* Can be used by 0x66 and 0x69 */
|
|
static const struct ieee80211_regdomain ath_world_regdom_66_69 = {
|
|
.n_reg_rules = 3,
|
|
.alpha2 = "99",
|
|
.reg_rules = {
|
|
ATH9K_2GHZ_CH01_11,
|
|
ATH9K_5GHZ_ALL,
|
|
}
|
|
};
|
|
|
|
/* Can be used by 0x67, 0x68, 0x6A and 0x6C */
|
|
static const struct ieee80211_regdomain ath_world_regdom_67_68_6A_6C = {
|
|
.n_reg_rules = 4,
|
|
.alpha2 = "99",
|
|
.reg_rules = {
|
|
ATH9K_2GHZ_CH01_11,
|
|
ATH9K_2GHZ_CH12_13,
|
|
ATH9K_5GHZ_ALL,
|
|
}
|
|
};
|
|
|
|
static inline bool is_wwr_sku(u16 regd)
|
|
{
|
|
return ((regd & COUNTRY_ERD_FLAG) != COUNTRY_ERD_FLAG) &&
|
|
(((regd & WORLD_SKU_MASK) == WORLD_SKU_PREFIX) ||
|
|
(regd == WORLD));
|
|
}
|
|
|
|
static u16 ath_regd_get_eepromRD(struct ath_regulatory *reg)
|
|
{
|
|
return reg->current_rd & ~WORLDWIDE_ROAMING_FLAG;
|
|
}
|
|
|
|
bool ath_is_world_regd(struct ath_regulatory *reg)
|
|
{
|
|
return is_wwr_sku(ath_regd_get_eepromRD(reg));
|
|
}
|
|
EXPORT_SYMBOL(ath_is_world_regd);
|
|
|
|
static const struct ieee80211_regdomain *ath_default_world_regdomain(void)
|
|
{
|
|
/* this is the most restrictive */
|
|
return &ath_world_regdom_64;
|
|
}
|
|
|
|
static const struct
|
|
ieee80211_regdomain *ath_world_regdomain(struct ath_regulatory *reg)
|
|
{
|
|
switch (reg->regpair->regDmnEnum) {
|
|
case 0x60:
|
|
case 0x61:
|
|
case 0x62:
|
|
return &ath_world_regdom_60_61_62;
|
|
case 0x63:
|
|
case 0x65:
|
|
return &ath_world_regdom_63_65;
|
|
case 0x64:
|
|
return &ath_world_regdom_64;
|
|
case 0x66:
|
|
case 0x69:
|
|
return &ath_world_regdom_66_69;
|
|
case 0x67:
|
|
case 0x68:
|
|
case 0x6A:
|
|
case 0x6C:
|
|
return &ath_world_regdom_67_68_6A_6C;
|
|
default:
|
|
WARN_ON(1);
|
|
return ath_default_world_regdomain();
|
|
}
|
|
}
|
|
|
|
bool ath_is_49ghz_allowed(u16 regdomain)
|
|
{
|
|
/* possibly more */
|
|
return regdomain == MKK9_MKKC;
|
|
}
|
|
EXPORT_SYMBOL(ath_is_49ghz_allowed);
|
|
|
|
/* Frequency is one where radar detection is required */
|
|
static bool ath_is_radar_freq(u16 center_freq)
|
|
{
|
|
return (center_freq >= 5260 && center_freq <= 5700);
|
|
}
|
|
|
|
/*
|
|
* N.B: These exception rules do not apply radar freqs.
|
|
*
|
|
* - We enable adhoc (or beaconing) if allowed by 11d
|
|
* - We enable active scan if the channel is allowed by 11d
|
|
* - If no country IE has been processed and a we determine we have
|
|
* received a beacon on a channel we can enable active scan and
|
|
* adhoc (or beaconing).
|
|
*/
|
|
static void
|
|
ath_reg_apply_beaconing_flags(struct wiphy *wiphy,
|
|
enum nl80211_reg_initiator initiator)
|
|
{
|
|
enum ieee80211_band band;
|
|
struct ieee80211_supported_band *sband;
|
|
const struct ieee80211_reg_rule *reg_rule;
|
|
struct ieee80211_channel *ch;
|
|
unsigned int i;
|
|
u32 bandwidth = 0;
|
|
int r;
|
|
|
|
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
|
|
|
|
if (!wiphy->bands[band])
|
|
continue;
|
|
|
|
sband = wiphy->bands[band];
|
|
|
|
for (i = 0; i < sband->n_channels; i++) {
|
|
|
|
ch = &sband->channels[i];
|
|
|
|
if (ath_is_radar_freq(ch->center_freq) ||
|
|
(ch->flags & IEEE80211_CHAN_RADAR))
|
|
continue;
|
|
|
|
if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) {
|
|
r = freq_reg_info(wiphy,
|
|
ch->center_freq,
|
|
bandwidth,
|
|
®_rule);
|
|
if (r)
|
|
continue;
|
|
/*
|
|
* If 11d had a rule for this channel ensure
|
|
* we enable adhoc/beaconing if it allows us to
|
|
* use it. Note that we would have disabled it
|
|
* by applying our static world regdomain by
|
|
* default during init, prior to calling our
|
|
* regulatory_hint().
|
|
*/
|
|
if (!(reg_rule->flags &
|
|
NL80211_RRF_NO_IBSS))
|
|
ch->flags &=
|
|
~IEEE80211_CHAN_NO_IBSS;
|
|
if (!(reg_rule->flags &
|
|
NL80211_RRF_PASSIVE_SCAN))
|
|
ch->flags &=
|
|
~IEEE80211_CHAN_PASSIVE_SCAN;
|
|
} else {
|
|
if (ch->beacon_found)
|
|
ch->flags &= ~(IEEE80211_CHAN_NO_IBSS |
|
|
IEEE80211_CHAN_PASSIVE_SCAN);
|
|
}
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
/* Allows active scan scan on Ch 12 and 13 */
|
|
static void
|
|
ath_reg_apply_active_scan_flags(struct wiphy *wiphy,
|
|
enum nl80211_reg_initiator initiator)
|
|
{
|
|
struct ieee80211_supported_band *sband;
|
|
struct ieee80211_channel *ch;
|
|
const struct ieee80211_reg_rule *reg_rule;
|
|
u32 bandwidth = 0;
|
|
int r;
|
|
|
|
sband = wiphy->bands[IEEE80211_BAND_2GHZ];
|
|
if (!sband)
|
|
return;
|
|
|
|
/*
|
|
* If no country IE has been received always enable active scan
|
|
* on these channels. This is only done for specific regulatory SKUs
|
|
*/
|
|
if (initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE) {
|
|
ch = &sband->channels[11]; /* CH 12 */
|
|
if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
|
|
ch->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN;
|
|
ch = &sband->channels[12]; /* CH 13 */
|
|
if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
|
|
ch->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN;
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* If a country IE has been received check its rule for this
|
|
* channel first before enabling active scan. The passive scan
|
|
* would have been enforced by the initial processing of our
|
|
* custom regulatory domain.
|
|
*/
|
|
|
|
ch = &sband->channels[11]; /* CH 12 */
|
|
r = freq_reg_info(wiphy, ch->center_freq, bandwidth, ®_rule);
|
|
if (!r) {
|
|
if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN))
|
|
if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
|
|
ch->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN;
|
|
}
|
|
|
|
ch = &sband->channels[12]; /* CH 13 */
|
|
r = freq_reg_info(wiphy, ch->center_freq, bandwidth, ®_rule);
|
|
if (!r) {
|
|
if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN))
|
|
if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
|
|
ch->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN;
|
|
}
|
|
}
|
|
|
|
/* Always apply Radar/DFS rules on freq range 5260 MHz - 5700 MHz */
|
|
static void ath_reg_apply_radar_flags(struct wiphy *wiphy)
|
|
{
|
|
struct ieee80211_supported_band *sband;
|
|
struct ieee80211_channel *ch;
|
|
unsigned int i;
|
|
|
|
if (!wiphy->bands[IEEE80211_BAND_5GHZ])
|
|
return;
|
|
|
|
sband = wiphy->bands[IEEE80211_BAND_5GHZ];
|
|
|
|
for (i = 0; i < sband->n_channels; i++) {
|
|
ch = &sband->channels[i];
|
|
if (!ath_is_radar_freq(ch->center_freq))
|
|
continue;
|
|
/* We always enable radar detection/DFS on this
|
|
* frequency range. Additionally we also apply on
|
|
* this frequency range:
|
|
* - If STA mode does not yet have DFS supports disable
|
|
* active scanning
|
|
* - If adhoc mode does not support DFS yet then
|
|
* disable adhoc in the frequency.
|
|
* - If AP mode does not yet support radar detection/DFS
|
|
* do not allow AP mode
|
|
*/
|
|
if (!(ch->flags & IEEE80211_CHAN_DISABLED))
|
|
ch->flags |= IEEE80211_CHAN_RADAR |
|
|
IEEE80211_CHAN_NO_IBSS |
|
|
IEEE80211_CHAN_PASSIVE_SCAN;
|
|
}
|
|
}
|
|
|
|
static void ath_reg_apply_world_flags(struct wiphy *wiphy,
|
|
enum nl80211_reg_initiator initiator,
|
|
struct ath_regulatory *reg)
|
|
{
|
|
switch (reg->regpair->regDmnEnum) {
|
|
case 0x60:
|
|
case 0x63:
|
|
case 0x66:
|
|
case 0x67:
|
|
case 0x6C:
|
|
ath_reg_apply_beaconing_flags(wiphy, initiator);
|
|
break;
|
|
case 0x68:
|
|
ath_reg_apply_beaconing_flags(wiphy, initiator);
|
|
ath_reg_apply_active_scan_flags(wiphy, initiator);
|
|
break;
|
|
}
|
|
}
|
|
|
|
int ath_reg_notifier_apply(struct wiphy *wiphy,
|
|
struct regulatory_request *request,
|
|
struct ath_regulatory *reg)
|
|
{
|
|
/* We always apply this */
|
|
ath_reg_apply_radar_flags(wiphy);
|
|
|
|
/*
|
|
* This would happen when we have sent a custom regulatory request
|
|
* a world regulatory domain and the scheduler hasn't yet processed
|
|
* any pending requests in the queue.
|
|
*/
|
|
if (!request)
|
|
return 0;
|
|
|
|
switch (request->initiator) {
|
|
case NL80211_REGDOM_SET_BY_DRIVER:
|
|
case NL80211_REGDOM_SET_BY_CORE:
|
|
case NL80211_REGDOM_SET_BY_USER:
|
|
break;
|
|
case NL80211_REGDOM_SET_BY_COUNTRY_IE:
|
|
if (ath_is_world_regd(reg))
|
|
ath_reg_apply_world_flags(wiphy, request->initiator,
|
|
reg);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(ath_reg_notifier_apply);
|
|
|
|
static bool ath_regd_is_eeprom_valid(struct ath_regulatory *reg)
|
|
{
|
|
u16 rd = ath_regd_get_eepromRD(reg);
|
|
int i;
|
|
|
|
if (rd & COUNTRY_ERD_FLAG) {
|
|
/* EEPROM value is a country code */
|
|
u16 cc = rd & ~COUNTRY_ERD_FLAG;
|
|
printk(KERN_DEBUG
|
|
"ath: EEPROM indicates we should expect "
|
|
"a country code\n");
|
|
for (i = 0; i < ARRAY_SIZE(allCountries); i++)
|
|
if (allCountries[i].countryCode == cc)
|
|
return true;
|
|
} else {
|
|
/* EEPROM value is a regpair value */
|
|
if (rd != CTRY_DEFAULT)
|
|
printk(KERN_DEBUG "ath: EEPROM indicates we "
|
|
"should expect a direct regpair map\n");
|
|
for (i = 0; i < ARRAY_SIZE(regDomainPairs); i++)
|
|
if (regDomainPairs[i].regDmnEnum == rd)
|
|
return true;
|
|
}
|
|
printk(KERN_DEBUG
|
|
"ath: invalid regulatory domain/country code 0x%x\n", rd);
|
|
return false;
|
|
}
|
|
|
|
/* EEPROM country code to regpair mapping */
|
|
static struct country_code_to_enum_rd*
|
|
ath_regd_find_country(u16 countryCode)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(allCountries); i++) {
|
|
if (allCountries[i].countryCode == countryCode)
|
|
return &allCountries[i];
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
/* EEPROM rd code to regpair mapping */
|
|
static struct country_code_to_enum_rd*
|
|
ath_regd_find_country_by_rd(int regdmn)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(allCountries); i++) {
|
|
if (allCountries[i].regDmnEnum == regdmn)
|
|
return &allCountries[i];
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
/* Returns the map of the EEPROM set RD to a country code */
|
|
static u16 ath_regd_get_default_country(u16 rd)
|
|
{
|
|
if (rd & COUNTRY_ERD_FLAG) {
|
|
struct country_code_to_enum_rd *country = NULL;
|
|
u16 cc = rd & ~COUNTRY_ERD_FLAG;
|
|
|
|
country = ath_regd_find_country(cc);
|
|
if (country != NULL)
|
|
return cc;
|
|
}
|
|
|
|
return CTRY_DEFAULT;
|
|
}
|
|
|
|
static struct reg_dmn_pair_mapping*
|
|
ath_get_regpair(int regdmn)
|
|
{
|
|
int i;
|
|
|
|
if (regdmn == NO_ENUMRD)
|
|
return NULL;
|
|
for (i = 0; i < ARRAY_SIZE(regDomainPairs); i++) {
|
|
if (regDomainPairs[i].regDmnEnum == regdmn)
|
|
return ®DomainPairs[i];
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static int
|
|
ath_regd_init_wiphy(struct ath_regulatory *reg,
|
|
struct wiphy *wiphy,
|
|
int (*reg_notifier)(struct wiphy *wiphy,
|
|
struct regulatory_request *request))
|
|
{
|
|
const struct ieee80211_regdomain *regd;
|
|
|
|
wiphy->reg_notifier = reg_notifier;
|
|
wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY;
|
|
|
|
if (ath_is_world_regd(reg)) {
|
|
/*
|
|
* Anything applied here (prior to wiphy registration) gets
|
|
* saved on the wiphy orig_* parameters
|
|
*/
|
|
regd = ath_world_regdomain(reg);
|
|
wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY;
|
|
} else {
|
|
/*
|
|
* This gets applied in the case of the absence of CRDA,
|
|
* it's our own custom world regulatory domain, similar to
|
|
* cfg80211's but we enable passive scanning.
|
|
*/
|
|
regd = ath_default_world_regdomain();
|
|
}
|
|
wiphy_apply_custom_regulatory(wiphy, regd);
|
|
ath_reg_apply_radar_flags(wiphy);
|
|
ath_reg_apply_world_flags(wiphy, NL80211_REGDOM_SET_BY_DRIVER, reg);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Some users have reported their EEPROM programmed with
|
|
* 0x8000 set, this is not a supported regulatory domain
|
|
* but since we have more than one user with it we need
|
|
* a solution for them. We default to 0x64, which is the
|
|
* default Atheros world regulatory domain.
|
|
*/
|
|
static void ath_regd_sanitize(struct ath_regulatory *reg)
|
|
{
|
|
if (reg->current_rd != COUNTRY_ERD_FLAG)
|
|
return;
|
|
printk(KERN_DEBUG "ath: EEPROM regdomain sanitized\n");
|
|
reg->current_rd = 0x64;
|
|
}
|
|
|
|
int
|
|
ath_regd_init(struct ath_regulatory *reg,
|
|
struct wiphy *wiphy,
|
|
int (*reg_notifier)(struct wiphy *wiphy,
|
|
struct regulatory_request *request))
|
|
{
|
|
struct country_code_to_enum_rd *country = NULL;
|
|
u16 regdmn;
|
|
|
|
if (!reg)
|
|
return -EINVAL;
|
|
|
|
ath_regd_sanitize(reg);
|
|
|
|
printk(KERN_DEBUG "ath: EEPROM regdomain: 0x%0x\n", reg->current_rd);
|
|
|
|
if (!ath_regd_is_eeprom_valid(reg)) {
|
|
printk(KERN_ERR "ath: Invalid EEPROM contents\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
regdmn = ath_regd_get_eepromRD(reg);
|
|
reg->country_code = ath_regd_get_default_country(regdmn);
|
|
|
|
if (reg->country_code == CTRY_DEFAULT &&
|
|
regdmn == CTRY_DEFAULT) {
|
|
printk(KERN_DEBUG "ath: EEPROM indicates default "
|
|
"country code should be used\n");
|
|
reg->country_code = CTRY_UNITED_STATES;
|
|
}
|
|
|
|
if (reg->country_code == CTRY_DEFAULT) {
|
|
country = NULL;
|
|
} else {
|
|
printk(KERN_DEBUG "ath: doing EEPROM country->regdmn "
|
|
"map search\n");
|
|
country = ath_regd_find_country(reg->country_code);
|
|
if (country == NULL) {
|
|
printk(KERN_DEBUG
|
|
"ath: no valid country maps found for "
|
|
"country code: 0x%0x\n",
|
|
reg->country_code);
|
|
return -EINVAL;
|
|
} else {
|
|
regdmn = country->regDmnEnum;
|
|
printk(KERN_DEBUG "ath: country maps to "
|
|
"regdmn code: 0x%0x\n",
|
|
regdmn);
|
|
}
|
|
}
|
|
|
|
reg->regpair = ath_get_regpair(regdmn);
|
|
|
|
if (!reg->regpair) {
|
|
printk(KERN_DEBUG "ath: "
|
|
"No regulatory domain pair found, cannot continue\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!country)
|
|
country = ath_regd_find_country_by_rd(regdmn);
|
|
|
|
if (country) {
|
|
reg->alpha2[0] = country->isoName[0];
|
|
reg->alpha2[1] = country->isoName[1];
|
|
} else {
|
|
reg->alpha2[0] = '0';
|
|
reg->alpha2[1] = '0';
|
|
}
|
|
|
|
printk(KERN_DEBUG "ath: Country alpha2 being used: %c%c\n",
|
|
reg->alpha2[0], reg->alpha2[1]);
|
|
printk(KERN_DEBUG "ath: Regpair used: 0x%0x\n",
|
|
reg->regpair->regDmnEnum);
|
|
|
|
ath_regd_init_wiphy(reg, wiphy, reg_notifier);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(ath_regd_init);
|
|
|
|
u32 ath_regd_get_band_ctl(struct ath_regulatory *reg,
|
|
enum ieee80211_band band)
|
|
{
|
|
if (!reg->regpair ||
|
|
(reg->country_code == CTRY_DEFAULT &&
|
|
is_wwr_sku(ath_regd_get_eepromRD(reg)))) {
|
|
return SD_NO_CTL;
|
|
}
|
|
|
|
switch (band) {
|
|
case IEEE80211_BAND_2GHZ:
|
|
return reg->regpair->reg_2ghz_ctl;
|
|
case IEEE80211_BAND_5GHZ:
|
|
return reg->regpair->reg_5ghz_ctl;
|
|
default:
|
|
return NO_CTL;
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(ath_regd_get_band_ctl);
|