mirror of
https://github.com/torvalds/linux.git
synced 2024-11-01 09:41:44 +00:00
1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
504 lines
22 KiB
Plaintext
504 lines
22 KiB
Plaintext
The MSI Driver Guide HOWTO
|
|
Tom L Nguyen tom.l.nguyen@intel.com
|
|
10/03/2003
|
|
Revised Feb 12, 2004 by Martine Silbermann
|
|
email: Martine.Silbermann@hp.com
|
|
Revised Jun 25, 2004 by Tom L Nguyen
|
|
|
|
1. About this guide
|
|
|
|
This guide describes the basics of Message Signaled Interrupts (MSI),
|
|
the advantages of using MSI over traditional interrupt mechanisms,
|
|
and how to enable your driver to use MSI or MSI-X. Also included is
|
|
a Frequently Asked Questions.
|
|
|
|
2. Copyright 2003 Intel Corporation
|
|
|
|
3. What is MSI/MSI-X?
|
|
|
|
Message Signaled Interrupt (MSI), as described in the PCI Local Bus
|
|
Specification Revision 2.3 or latest, is an optional feature, and a
|
|
required feature for PCI Express devices. MSI enables a device function
|
|
to request service by sending an Inbound Memory Write on its PCI bus to
|
|
the FSB as a Message Signal Interrupt transaction. Because MSI is
|
|
generated in the form of a Memory Write, all transaction conditions,
|
|
such as a Retry, Master-Abort, Target-Abort or normal completion, are
|
|
supported.
|
|
|
|
A PCI device that supports MSI must also support pin IRQ assertion
|
|
interrupt mechanism to provide backward compatibility for systems that
|
|
do not support MSI. In Systems, which support MSI, the bus driver is
|
|
responsible for initializing the message address and message data of
|
|
the device function's MSI/MSI-X capability structure during device
|
|
initial configuration.
|
|
|
|
An MSI capable device function indicates MSI support by implementing
|
|
the MSI/MSI-X capability structure in its PCI capability list. The
|
|
device function may implement both the MSI capability structure and
|
|
the MSI-X capability structure; however, the bus driver should not
|
|
enable both.
|
|
|
|
The MSI capability structure contains Message Control register,
|
|
Message Address register and Message Data register. These registers
|
|
provide the bus driver control over MSI. The Message Control register
|
|
indicates the MSI capability supported by the device. The Message
|
|
Address register specifies the target address and the Message Data
|
|
register specifies the characteristics of the message. To request
|
|
service, the device function writes the content of the Message Data
|
|
register to the target address. The device and its software driver
|
|
are prohibited from writing to these registers.
|
|
|
|
The MSI-X capability structure is an optional extension to MSI. It
|
|
uses an independent and separate capability structure. There are
|
|
some key advantages to implementing the MSI-X capability structure
|
|
over the MSI capability structure as described below.
|
|
|
|
- Support a larger maximum number of vectors per function.
|
|
|
|
- Provide the ability for system software to configure
|
|
each vector with an independent message address and message
|
|
data, specified by a table that resides in Memory Space.
|
|
|
|
- MSI and MSI-X both support per-vector masking. Per-vector
|
|
masking is an optional extension of MSI but a required
|
|
feature for MSI-X. Per-vector masking provides the kernel
|
|
the ability to mask/unmask MSI when servicing its software
|
|
interrupt service routing handler. If per-vector masking is
|
|
not supported, then the device driver should provide the
|
|
hardware/software synchronization to ensure that the device
|
|
generates MSI when the driver wants it to do so.
|
|
|
|
4. Why use MSI?
|
|
|
|
As a benefit the simplification of board design, MSI allows board
|
|
designers to remove out of band interrupt routing. MSI is another
|
|
step towards a legacy-free environment.
|
|
|
|
Due to increasing pressure on chipset and processor packages to
|
|
reduce pin count, the need for interrupt pins is expected to
|
|
diminish over time. Devices, due to pin constraints, may implement
|
|
messages to increase performance.
|
|
|
|
PCI Express endpoints uses INTx emulation (in-band messages) instead
|
|
of IRQ pin assertion. Using INTx emulation requires interrupt
|
|
sharing among devices connected to the same node (PCI bridge) while
|
|
MSI is unique (non-shared) and does not require BIOS configuration
|
|
support. As a result, the PCI Express technology requires MSI
|
|
support for better interrupt performance.
|
|
|
|
Using MSI enables the device functions to support two or more
|
|
vectors, which can be configured to target different CPU's to
|
|
increase scalability.
|
|
|
|
5. Configuring a driver to use MSI/MSI-X
|
|
|
|
By default, the kernel will not enable MSI/MSI-X on all devices that
|
|
support this capability. The CONFIG_PCI_MSI kernel option
|
|
must be selected to enable MSI/MSI-X support.
|
|
|
|
5.1 Including MSI/MSI-X support into the kernel
|
|
|
|
To allow MSI/MSI-X capable device drivers to selectively enable
|
|
MSI/MSI-X (using pci_enable_msi()/pci_enable_msix() as described
|
|
below), the VECTOR based scheme needs to be enabled by setting
|
|
CONFIG_PCI_MSI during kernel config.
|
|
|
|
Since the target of the inbound message is the local APIC, providing
|
|
CONFIG_X86_LOCAL_APIC must be enabled as well as CONFIG_PCI_MSI.
|
|
|
|
5.2 Configuring for MSI support
|
|
|
|
Due to the non-contiguous fashion in vector assignment of the
|
|
existing Linux kernel, this version does not support multiple
|
|
messages regardless of a device function is capable of supporting
|
|
more than one vector. To enable MSI on a device function's MSI
|
|
capability structure requires a device driver to call the function
|
|
pci_enable_msi() explicitly.
|
|
|
|
5.2.1 API pci_enable_msi
|
|
|
|
int pci_enable_msi(struct pci_dev *dev)
|
|
|
|
With this new API, any existing device driver, which like to have
|
|
MSI enabled on its device function, must call this API to enable MSI
|
|
A successful call will initialize the MSI capability structure
|
|
with ONE vector, regardless of whether a device function is
|
|
capable of supporting multiple messages. This vector replaces the
|
|
pre-assigned dev->irq with a new MSI vector. To avoid the conflict
|
|
of new assigned vector with existing pre-assigned vector requires
|
|
a device driver to call this API before calling request_irq().
|
|
|
|
5.2.2 API pci_disable_msi
|
|
|
|
void pci_disable_msi(struct pci_dev *dev)
|
|
|
|
This API should always be used to undo the effect of pci_enable_msi()
|
|
when a device driver is unloading. This API restores dev->irq with
|
|
the pre-assigned IOAPIC vector and switches a device's interrupt
|
|
mode to PCI pin-irq assertion/INTx emulation mode.
|
|
|
|
Note that a device driver should always call free_irq() on MSI vector
|
|
it has done request_irq() on before calling this API. Failure to do
|
|
so results a BUG_ON() and a device will be left with MSI enabled and
|
|
leaks its vector.
|
|
|
|
5.2.3 MSI mode vs. legacy mode diagram
|
|
|
|
The below diagram shows the events, which switches the interrupt
|
|
mode on the MSI-capable device function between MSI mode and
|
|
PIN-IRQ assertion mode.
|
|
|
|
------------ pci_enable_msi ------------------------
|
|
| | <=============== | |
|
|
| MSI MODE | | PIN-IRQ ASSERTION MODE |
|
|
| | ===============> | |
|
|
------------ pci_disable_msi ------------------------
|
|
|
|
|
|
Figure 1.0 MSI Mode vs. Legacy Mode
|
|
|
|
In Figure 1.0, a device operates by default in legacy mode. Legacy
|
|
in this context means PCI pin-irq assertion or PCI-Express INTx
|
|
emulation. A successful MSI request (using pci_enable_msi()) switches
|
|
a device's interrupt mode to MSI mode. A pre-assigned IOAPIC vector
|
|
stored in dev->irq will be saved by the PCI subsystem and a new
|
|
assigned MSI vector will replace dev->irq.
|
|
|
|
To return back to its default mode, a device driver should always call
|
|
pci_disable_msi() to undo the effect of pci_enable_msi(). Note that a
|
|
device driver should always call free_irq() on MSI vector it has done
|
|
request_irq() on before calling pci_disable_msi(). Failure to do so
|
|
results a BUG_ON() and a device will be left with MSI enabled and
|
|
leaks its vector. Otherwise, the PCI subsystem restores a device's
|
|
dev->irq with a pre-assigned IOAPIC vector and marks released
|
|
MSI vector as unused.
|
|
|
|
Once being marked as unused, there is no guarantee that the PCI
|
|
subsystem will reserve this MSI vector for a device. Depending on
|
|
the availability of current PCI vector resources and the number of
|
|
MSI/MSI-X requests from other drivers, this MSI may be re-assigned.
|
|
|
|
For the case where the PCI subsystem re-assigned this MSI vector
|
|
another driver, a request to switching back to MSI mode may result
|
|
in being assigned a different MSI vector or a failure if no more
|
|
vectors are available.
|
|
|
|
5.3 Configuring for MSI-X support
|
|
|
|
Due to the ability of the system software to configure each vector of
|
|
the MSI-X capability structure with an independent message address
|
|
and message data, the non-contiguous fashion in vector assignment of
|
|
the existing Linux kernel has no impact on supporting multiple
|
|
messages on an MSI-X capable device functions. To enable MSI-X on
|
|
a device function's MSI-X capability structure requires its device
|
|
driver to call the function pci_enable_msix() explicitly.
|
|
|
|
The function pci_enable_msix(), once invoked, enables either
|
|
all or nothing, depending on the current availability of PCI vector
|
|
resources. If the PCI vector resources are available for the number
|
|
of vectors requested by a device driver, this function will configure
|
|
the MSI-X table of the MSI-X capability structure of a device with
|
|
requested messages. To emphasize this reason, for example, a device
|
|
may be capable for supporting the maximum of 32 vectors while its
|
|
software driver usually may request 4 vectors. It is recommended
|
|
that the device driver should call this function once during the
|
|
initialization phase of the device driver.
|
|
|
|
Unlike the function pci_enable_msi(), the function pci_enable_msix()
|
|
does not replace the pre-assigned IOAPIC dev->irq with a new MSI
|
|
vector because the PCI subsystem writes the 1:1 vector-to-entry mapping
|
|
into the field vector of each element contained in a second argument.
|
|
Note that the pre-assigned IO-APIC dev->irq is valid only if the device
|
|
operates in PIN-IRQ assertion mode. In MSI-X mode, any attempt of
|
|
using dev->irq by the device driver to request for interrupt service
|
|
may result unpredictabe behavior.
|
|
|
|
For each MSI-X vector granted, a device driver is responsible to call
|
|
other functions like request_irq(), enable_irq(), etc. to enable
|
|
this vector with its corresponding interrupt service handler. It is
|
|
a device driver's choice to assign all vectors with the same
|
|
interrupt service handler or each vector with a unique interrupt
|
|
service handler.
|
|
|
|
5.3.1 Handling MMIO address space of MSI-X Table
|
|
|
|
The PCI 3.0 specification has implementation notes that MMIO address
|
|
space for a device's MSI-X structure should be isolated so that the
|
|
software system can set different page for controlling accesses to
|
|
the MSI-X structure. The implementation of MSI patch requires the PCI
|
|
subsystem, not a device driver, to maintain full control of the MSI-X
|
|
table/MSI-X PBA and MMIO address space of the MSI-X table/MSI-X PBA.
|
|
A device driver is prohibited from requesting the MMIO address space
|
|
of the MSI-X table/MSI-X PBA. Otherwise, the PCI subsystem will fail
|
|
enabling MSI-X on its hardware device when it calls the function
|
|
pci_enable_msix().
|
|
|
|
5.3.2 Handling MSI-X allocation
|
|
|
|
Determining the number of MSI-X vectors allocated to a function is
|
|
dependent on the number of MSI capable devices and MSI-X capable
|
|
devices populated in the system. The policy of allocating MSI-X
|
|
vectors to a function is defined as the following:
|
|
|
|
#of MSI-X vectors allocated to a function = (x - y)/z where
|
|
|
|
x = The number of available PCI vector resources by the time
|
|
the device driver calls pci_enable_msix(). The PCI vector
|
|
resources is the sum of the number of unassigned vectors
|
|
(new) and the number of released vectors when any MSI/MSI-X
|
|
device driver switches its hardware device back to a legacy
|
|
mode or is hot-removed. The number of unassigned vectors
|
|
may exclude some vectors reserved, as defined in parameter
|
|
NR_HP_RESERVED_VECTORS, for the case where the system is
|
|
capable of supporting hot-add/hot-remove operations. Users
|
|
may change the value defined in NR_HR_RESERVED_VECTORS to
|
|
meet their specific needs.
|
|
|
|
y = The number of MSI capable devices populated in the system.
|
|
This policy ensures that each MSI capable device has its
|
|
vector reserved to avoid the case where some MSI-X capable
|
|
drivers may attempt to claim all available vector resources.
|
|
|
|
z = The number of MSI-X capable devices pupulated in the system.
|
|
This policy ensures that maximum (x - y) is distributed
|
|
evenly among MSI-X capable devices.
|
|
|
|
Note that the PCI subsystem scans y and z during a bus enumeration.
|
|
When the PCI subsystem completes configuring MSI/MSI-X capability
|
|
structure of a device as requested by its device driver, y/z is
|
|
decremented accordingly.
|
|
|
|
5.3.3 Handling MSI-X shortages
|
|
|
|
For the case where fewer MSI-X vectors are allocated to a function
|
|
than requested, the function pci_enable_msix() will return the
|
|
maximum number of MSI-X vectors available to the caller. A device
|
|
driver may re-send its request with fewer or equal vectors indicated
|
|
in a return. For example, if a device driver requests 5 vectors, but
|
|
the number of available vectors is 3 vectors, a value of 3 will be a
|
|
return as a result of pci_enable_msix() call. A function could be
|
|
designed for its driver to use only 3 MSI-X table entries as
|
|
different combinations as ABC--, A-B-C, A--CB, etc. Note that this
|
|
patch does not support multiple entries with the same vector. Such
|
|
attempt by a device driver to use 5 MSI-X table entries with 3 vectors
|
|
as ABBCC, AABCC, BCCBA, etc will result as a failure by the function
|
|
pci_enable_msix(). Below are the reasons why supporting multiple
|
|
entries with the same vector is an undesirable solution.
|
|
|
|
- The PCI subsystem can not determine which entry, which
|
|
generated the message, to mask/unmask MSI while handling
|
|
software driver ISR. Attempting to walk through all MSI-X
|
|
table entries (2048 max) to mask/unmask any match vector
|
|
is an undesirable solution.
|
|
|
|
- Walk through all MSI-X table entries (2048 max) to handle
|
|
SMP affinity of any match vector is an undesirable solution.
|
|
|
|
5.3.4 API pci_enable_msix
|
|
|
|
int pci_enable_msix(struct pci_dev *dev, u32 *entries, int nvec)
|
|
|
|
This API enables a device driver to request the PCI subsystem
|
|
for enabling MSI-X messages on its hardware device. Depending on
|
|
the availability of PCI vectors resources, the PCI subsystem enables
|
|
either all or nothing.
|
|
|
|
Argument dev points to the device (pci_dev) structure.
|
|
|
|
Argument entries is a pointer of unsigned integer type. The number of
|
|
elements is indicated in argument nvec. The content of each element
|
|
will be mapped to the following struct defined in /driver/pci/msi.h.
|
|
|
|
struct msix_entry {
|
|
u16 vector; /* kernel uses to write alloc vector */
|
|
u16 entry; /* driver uses to specify entry */
|
|
};
|
|
|
|
A device driver is responsible for initializing the field entry of
|
|
each element with unique entry supported by MSI-X table. Otherwise,
|
|
-EINVAL will be returned as a result. A successful return of zero
|
|
indicates the PCI subsystem completes initializing each of requested
|
|
entries of the MSI-X table with message address and message data.
|
|
Last but not least, the PCI subsystem will write the 1:1
|
|
vector-to-entry mapping into the field vector of each element. A
|
|
device driver is responsible of keeping track of allocated MSI-X
|
|
vectors in its internal data structure.
|
|
|
|
Argument nvec is an integer indicating the number of messages
|
|
requested.
|
|
|
|
A return of zero indicates that the number of MSI-X vectors is
|
|
successfully allocated. A return of greater than zero indicates
|
|
MSI-X vector shortage. Or a return of less than zero indicates
|
|
a failure. This failure may be a result of duplicate entries
|
|
specified in second argument, or a result of no available vector,
|
|
or a result of failing to initialize MSI-X table entries.
|
|
|
|
5.3.5 API pci_disable_msix
|
|
|
|
void pci_disable_msix(struct pci_dev *dev)
|
|
|
|
This API should always be used to undo the effect of pci_enable_msix()
|
|
when a device driver is unloading. Note that a device driver should
|
|
always call free_irq() on all MSI-X vectors it has done request_irq()
|
|
on before calling this API. Failure to do so results a BUG_ON() and
|
|
a device will be left with MSI-X enabled and leaks its vectors.
|
|
|
|
5.3.6 MSI-X mode vs. legacy mode diagram
|
|
|
|
The below diagram shows the events, which switches the interrupt
|
|
mode on the MSI-X capable device function between MSI-X mode and
|
|
PIN-IRQ assertion mode (legacy).
|
|
|
|
------------ pci_enable_msix(,,n) ------------------------
|
|
| | <=============== | |
|
|
| MSI-X MODE | | PIN-IRQ ASSERTION MODE |
|
|
| | ===============> | |
|
|
------------ pci_disable_msix ------------------------
|
|
|
|
Figure 2.0 MSI-X Mode vs. Legacy Mode
|
|
|
|
In Figure 2.0, a device operates by default in legacy mode. A
|
|
successful MSI-X request (using pci_enable_msix()) switches a
|
|
device's interrupt mode to MSI-X mode. A pre-assigned IOAPIC vector
|
|
stored in dev->irq will be saved by the PCI subsystem; however,
|
|
unlike MSI mode, the PCI subsystem will not replace dev->irq with
|
|
assigned MSI-X vector because the PCI subsystem already writes the 1:1
|
|
vector-to-entry mapping into the field vector of each element
|
|
specified in second argument.
|
|
|
|
To return back to its default mode, a device driver should always call
|
|
pci_disable_msix() to undo the effect of pci_enable_msix(). Note that
|
|
a device driver should always call free_irq() on all MSI-X vectors it
|
|
has done request_irq() on before calling pci_disable_msix(). Failure
|
|
to do so results a BUG_ON() and a device will be left with MSI-X
|
|
enabled and leaks its vectors. Otherwise, the PCI subsystem switches a
|
|
device function's interrupt mode from MSI-X mode to legacy mode and
|
|
marks all allocated MSI-X vectors as unused.
|
|
|
|
Once being marked as unused, there is no guarantee that the PCI
|
|
subsystem will reserve these MSI-X vectors for a device. Depending on
|
|
the availability of current PCI vector resources and the number of
|
|
MSI/MSI-X requests from other drivers, these MSI-X vectors may be
|
|
re-assigned.
|
|
|
|
For the case where the PCI subsystem re-assigned these MSI-X vectors
|
|
to other driver, a request to switching back to MSI-X mode may result
|
|
being assigned with another set of MSI-X vectors or a failure if no
|
|
more vectors are available.
|
|
|
|
5.4 Handling function implementng both MSI and MSI-X capabilities
|
|
|
|
For the case where a function implements both MSI and MSI-X
|
|
capabilities, the PCI subsystem enables a device to run either in MSI
|
|
mode or MSI-X mode but not both. A device driver determines whether it
|
|
wants MSI or MSI-X enabled on its hardware device. Once a device
|
|
driver requests for MSI, for example, it is prohibited to request for
|
|
MSI-X; in other words, a device driver is not permitted to ping-pong
|
|
between MSI mod MSI-X mode during a run-time.
|
|
|
|
5.5 Hardware requirements for MSI/MSI-X support
|
|
MSI/MSI-X support requires support from both system hardware and
|
|
individual hardware device functions.
|
|
|
|
5.5.1 System hardware support
|
|
Since the target of MSI address is the local APIC CPU, enabling
|
|
MSI/MSI-X support in Linux kernel is dependent on whether existing
|
|
system hardware supports local APIC. Users should verify their
|
|
system whether it runs when CONFIG_X86_LOCAL_APIC=y.
|
|
|
|
In SMP environment, CONFIG_X86_LOCAL_APIC is automatically set;
|
|
however, in UP environment, users must manually set
|
|
CONFIG_X86_LOCAL_APIC. Once CONFIG_X86_LOCAL_APIC=y, setting
|
|
CONFIG_PCI_MSI enables the VECTOR based scheme and
|
|
the option for MSI-capable device drivers to selectively enable
|
|
MSI/MSI-X.
|
|
|
|
Note that CONFIG_X86_IO_APIC setting is irrelevant because MSI/MSI-X
|
|
vector is allocated new during runtime and MSI/MSI-X support does not
|
|
depend on BIOS support. This key independency enables MSI/MSI-X
|
|
support on future IOxAPIC free platform.
|
|
|
|
5.5.2 Device hardware support
|
|
The hardware device function supports MSI by indicating the
|
|
MSI/MSI-X capability structure on its PCI capability list. By
|
|
default, this capability structure will not be initialized by
|
|
the kernel to enable MSI during the system boot. In other words,
|
|
the device function is running on its default pin assertion mode.
|
|
Note that in many cases the hardware supporting MSI have bugs,
|
|
which may result in system hang. The software driver of specific
|
|
MSI-capable hardware is responsible for whether calling
|
|
pci_enable_msi or not. A return of zero indicates the kernel
|
|
successfully initializes the MSI/MSI-X capability structure of the
|
|
device funtion. The device function is now running on MSI/MSI-X mode.
|
|
|
|
5.6 How to tell whether MSI/MSI-X is enabled on device function
|
|
|
|
At the driver level, a return of zero from the function call of
|
|
pci_enable_msi()/pci_enable_msix() indicates to a device driver that
|
|
its device function is initialized successfully and ready to run in
|
|
MSI/MSI-X mode.
|
|
|
|
At the user level, users can use command 'cat /proc/interrupts'
|
|
to display the vector allocated for a device and its interrupt
|
|
MSI/MSI-X mode ("PCI MSI"/"PCI MSIX"). Below shows below MSI mode is
|
|
enabled on a SCSI Adaptec 39320D Ultra320.
|
|
|
|
CPU0 CPU1
|
|
0: 324639 0 IO-APIC-edge timer
|
|
1: 1186 0 IO-APIC-edge i8042
|
|
2: 0 0 XT-PIC cascade
|
|
12: 2797 0 IO-APIC-edge i8042
|
|
14: 6543 0 IO-APIC-edge ide0
|
|
15: 1 0 IO-APIC-edge ide1
|
|
169: 0 0 IO-APIC-level uhci-hcd
|
|
185: 0 0 IO-APIC-level uhci-hcd
|
|
193: 138 10 PCI MSI aic79xx
|
|
201: 30 0 PCI MSI aic79xx
|
|
225: 30 0 IO-APIC-level aic7xxx
|
|
233: 30 0 IO-APIC-level aic7xxx
|
|
NMI: 0 0
|
|
LOC: 324553 325068
|
|
ERR: 0
|
|
MIS: 0
|
|
|
|
6. FAQ
|
|
|
|
Q1. Are there any limitations on using the MSI?
|
|
|
|
A1. If the PCI device supports MSI and conforms to the
|
|
specification and the platform supports the APIC local bus,
|
|
then using MSI should work.
|
|
|
|
Q2. Will it work on all the Pentium processors (P3, P4, Xeon,
|
|
AMD processors)? In P3 IPI's are transmitted on the APIC local
|
|
bus and in P4 and Xeon they are transmitted on the system
|
|
bus. Are there any implications with this?
|
|
|
|
A2. MSI support enables a PCI device sending an inbound
|
|
memory write (0xfeexxxxx as target address) on its PCI bus
|
|
directly to the FSB. Since the message address has a
|
|
redirection hint bit cleared, it should work.
|
|
|
|
Q3. The target address 0xfeexxxxx will be translated by the
|
|
Host Bridge into an interrupt message. Are there any
|
|
limitations on the chipsets such as Intel 8xx, Intel e7xxx,
|
|
or VIA?
|
|
|
|
A3. If these chipsets support an inbound memory write with
|
|
target address set as 0xfeexxxxx, as conformed to PCI
|
|
specification 2.3 or latest, then it should work.
|
|
|
|
Q4. From the driver point of view, if the MSI is lost because
|
|
of the errors occur during inbound memory write, then it may
|
|
wait for ever. Is there a mechanism for it to recover?
|
|
|
|
A4. Since the target of the transaction is an inbound memory
|
|
write, all transaction termination conditions (Retry,
|
|
Master-Abort, Target-Abort, or normal completion) are
|
|
supported. A device sending an MSI must abide by all the PCI
|
|
rules and conditions regarding that inbound memory write. So,
|
|
if a retry is signaled it must retry, etc... We believe that
|
|
the recommendation for Abort is also a retry (refer to PCI
|
|
specification 2.3 or latest).
|