linux/drivers/pci/host/pci-keystone.c
Murali Karicheri 4455efc908 PCI: keystone: Assume controller is already in RC mode
Keystone PCI hardware supports both RC and EP modes and devcfg register has
bits to boot strap the device to either of these modes.  It seems proper to
add this functionality to the boot loader rather than in the driver as
device will be operating in either mode, not both any time.  Currently the
driver supports only RC mode and hence register configuration in the driver
is not needed and the driver can assume the hardware is in RC mode.

Also update the DT documentation accordingly.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-09-16 15:45:45 -06:00

415 lines
11 KiB
C

/*
* PCIe host controller driver for Texas Instruments Keystone SoCs
*
* Copyright (C) 2013-2014 Texas Instruments., Ltd.
* http://www.ti.com
*
* Author: Murali Karicheri <m-karicheri2@ti.com>
* Implementation based on pci-exynos.c and pcie-designware.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/irqchip/chained_irq.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/irqdomain.h>
#include <linux/module.h>
#include <linux/msi.h>
#include <linux/of_irq.h>
#include <linux/of.h>
#include <linux/of_pci.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
#include <linux/resource.h>
#include <linux/signal.h>
#include "pcie-designware.h"
#include "pci-keystone.h"
#define DRIVER_NAME "keystone-pcie"
/* driver specific constants */
#define MAX_MSI_HOST_IRQS 8
#define MAX_LEGACY_HOST_IRQS 4
/* DEV_STAT_CTRL */
#define PCIE_CAP_BASE 0x70
/* PCIE controller device IDs */
#define PCIE_RC_K2HK 0xb008
#define PCIE_RC_K2E 0xb009
#define PCIE_RC_K2L 0xb00a
#define to_keystone_pcie(x) container_of(x, struct keystone_pcie, pp)
static void quirk_limit_mrrs(struct pci_dev *dev)
{
struct pci_bus *bus = dev->bus;
struct pci_dev *bridge = bus->self;
static const struct pci_device_id rc_pci_devids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCIE_RC_K2HK),
.class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, },
{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCIE_RC_K2E),
.class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, },
{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCIE_RC_K2L),
.class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, },
{ 0, },
};
if (pci_is_root_bus(bus))
return;
/* look for the host bridge */
while (!pci_is_root_bus(bus)) {
bridge = bus->self;
bus = bus->parent;
}
if (bridge) {
/*
* Keystone PCI controller has a h/w limitation of
* 256 bytes maximum read request size. It can't handle
* anything higher than this. So force this limit on
* all downstream devices.
*/
if (pci_match_id(rc_pci_devids, bridge)) {
if (pcie_get_readrq(dev) > 256) {
dev_info(&dev->dev, "limiting MRRS to 256\n");
pcie_set_readrq(dev, 256);
}
}
}
}
DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, quirk_limit_mrrs);
static int ks_pcie_establish_link(struct keystone_pcie *ks_pcie)
{
struct pcie_port *pp = &ks_pcie->pp;
int count = 200;
dw_pcie_setup_rc(pp);
if (dw_pcie_link_up(pp)) {
dev_err(pp->dev, "Link already up\n");
return 0;
}
ks_dw_pcie_initiate_link_train(ks_pcie);
/* check if the link is up or not */
while (!dw_pcie_link_up(pp)) {
usleep_range(100, 1000);
if (--count) {
ks_dw_pcie_initiate_link_train(ks_pcie);
continue;
}
dev_err(pp->dev, "phy link never came up\n");
return -EINVAL;
}
return 0;
}
static void ks_pcie_msi_irq_handler(unsigned int irq, struct irq_desc *desc)
{
struct keystone_pcie *ks_pcie = irq_desc_get_handler_data(desc);
u32 offset = irq - ks_pcie->msi_host_irqs[0];
struct pcie_port *pp = &ks_pcie->pp;
struct irq_chip *chip = irq_desc_get_chip(desc);
dev_dbg(pp->dev, "ks_pci_msi_irq_handler, irq %d\n", irq);
/*
* The chained irq handler installation would have replaced normal
* interrupt driver handler so we need to take care of mask/unmask and
* ack operation.
*/
chained_irq_enter(chip, desc);
ks_dw_pcie_handle_msi_irq(ks_pcie, offset);
chained_irq_exit(chip, desc);
}
/**
* ks_pcie_legacy_irq_handler() - Handle legacy interrupt
* @irq: IRQ line for legacy interrupts
* @desc: Pointer to irq descriptor
*
* Traverse through pending legacy interrupts and invoke handler for each. Also
* takes care of interrupt controller level mask/ack operation.
*/
static void ks_pcie_legacy_irq_handler(unsigned int irq, struct irq_desc *desc)
{
struct keystone_pcie *ks_pcie = irq_desc_get_handler_data(desc);
struct pcie_port *pp = &ks_pcie->pp;
u32 irq_offset = irq - ks_pcie->legacy_host_irqs[0];
struct irq_chip *chip = irq_desc_get_chip(desc);
dev_dbg(pp->dev, ": Handling legacy irq %d\n", irq);
/*
* The chained irq handler installation would have replaced normal
* interrupt driver handler so we need to take care of mask/unmask and
* ack operation.
*/
chained_irq_enter(chip, desc);
ks_dw_pcie_handle_legacy_irq(ks_pcie, irq_offset);
chained_irq_exit(chip, desc);
}
static int ks_pcie_get_irq_controller_info(struct keystone_pcie *ks_pcie,
char *controller, int *num_irqs)
{
int temp, max_host_irqs, legacy = 1, *host_irqs, ret = -EINVAL;
struct device *dev = ks_pcie->pp.dev;
struct device_node *np_pcie = dev->of_node, **np_temp;
if (!strcmp(controller, "msi-interrupt-controller"))
legacy = 0;
if (legacy) {
np_temp = &ks_pcie->legacy_intc_np;
max_host_irqs = MAX_LEGACY_HOST_IRQS;
host_irqs = &ks_pcie->legacy_host_irqs[0];
} else {
np_temp = &ks_pcie->msi_intc_np;
max_host_irqs = MAX_MSI_HOST_IRQS;
host_irqs = &ks_pcie->msi_host_irqs[0];
}
/* interrupt controller is in a child node */
*np_temp = of_find_node_by_name(np_pcie, controller);
if (!(*np_temp)) {
dev_err(dev, "Node for %s is absent\n", controller);
goto out;
}
temp = of_irq_count(*np_temp);
if (!temp)
goto out;
if (temp > max_host_irqs)
dev_warn(dev, "Too many %s interrupts defined %u\n",
(legacy ? "legacy" : "MSI"), temp);
/*
* support upto max_host_irqs. In dt from index 0 to 3 (legacy) or 0 to
* 7 (MSI)
*/
for (temp = 0; temp < max_host_irqs; temp++) {
host_irqs[temp] = irq_of_parse_and_map(*np_temp, temp);
if (host_irqs[temp] < 0)
break;
}
if (temp) {
*num_irqs = temp;
ret = 0;
}
out:
return ret;
}
static void ks_pcie_setup_interrupts(struct keystone_pcie *ks_pcie)
{
int i;
/* Legacy IRQ */
for (i = 0; i < ks_pcie->num_legacy_host_irqs; i++) {
irq_set_handler_data(ks_pcie->legacy_host_irqs[i], ks_pcie);
irq_set_chained_handler(ks_pcie->legacy_host_irqs[i],
ks_pcie_legacy_irq_handler);
}
ks_dw_pcie_enable_legacy_irqs(ks_pcie);
/* MSI IRQ */
if (IS_ENABLED(CONFIG_PCI_MSI)) {
for (i = 0; i < ks_pcie->num_msi_host_irqs; i++) {
irq_set_chained_handler(ks_pcie->msi_host_irqs[i],
ks_pcie_msi_irq_handler);
irq_set_handler_data(ks_pcie->msi_host_irqs[i],
ks_pcie);
}
}
}
/*
* When a PCI device does not exist during config cycles, keystone host gets a
* bus error instead of returning 0xffffffff. This handler always returns 0
* for this kind of faults.
*/
static int keystone_pcie_fault(unsigned long addr, unsigned int fsr,
struct pt_regs *regs)
{
unsigned long instr = *(unsigned long *) instruction_pointer(regs);
if ((instr & 0x0e100090) == 0x00100090) {
int reg = (instr >> 12) & 15;
regs->uregs[reg] = -1;
regs->ARM_pc += 4;
}
return 0;
}
static void __init ks_pcie_host_init(struct pcie_port *pp)
{
u32 vendor_device_id, val;
struct keystone_pcie *ks_pcie = to_keystone_pcie(pp);
ks_pcie_establish_link(ks_pcie);
ks_dw_pcie_setup_rc_app_regs(ks_pcie);
ks_pcie_setup_interrupts(ks_pcie);
writew(PCI_IO_RANGE_TYPE_32 | (PCI_IO_RANGE_TYPE_32 << 8),
pp->dbi_base + PCI_IO_BASE);
/* update the Vendor ID */
vendor_device_id = readl(ks_pcie->va_reg_pciid);
writew((vendor_device_id >> 16), pp->dbi_base + PCI_DEVICE_ID);
/* update the DEV_STAT_CTRL to publish right mrrs */
val = readl(pp->dbi_base + PCIE_CAP_BASE + PCI_EXP_DEVCTL);
val &= ~PCI_EXP_DEVCTL_READRQ;
/* set the mrrs to 256 bytes */
val |= BIT(12);
writel(val, pp->dbi_base + PCIE_CAP_BASE + PCI_EXP_DEVCTL);
/*
* PCIe access errors that result into OCP errors are caught by ARM as
* "External aborts"
*/
hook_fault_code(17, keystone_pcie_fault, SIGBUS, 0,
"Asynchronous external abort");
}
static struct pcie_host_ops keystone_pcie_host_ops = {
.rd_other_conf = ks_dw_pcie_rd_other_conf,
.wr_other_conf = ks_dw_pcie_wr_other_conf,
.link_up = ks_dw_pcie_link_up,
.host_init = ks_pcie_host_init,
.msi_set_irq = ks_dw_pcie_msi_set_irq,
.msi_clear_irq = ks_dw_pcie_msi_clear_irq,
.get_msi_data = ks_dw_pcie_get_msi_data,
.msi_host_init = ks_dw_pcie_msi_host_init,
.scan_bus = ks_dw_pcie_v3_65_scan_bus,
};
static int __init ks_add_pcie_port(struct keystone_pcie *ks_pcie,
struct platform_device *pdev)
{
struct pcie_port *pp = &ks_pcie->pp;
int ret;
ret = ks_pcie_get_irq_controller_info(ks_pcie,
"legacy-interrupt-controller",
&ks_pcie->num_legacy_host_irqs);
if (ret)
return ret;
if (IS_ENABLED(CONFIG_PCI_MSI)) {
ret = ks_pcie_get_irq_controller_info(ks_pcie,
"msi-interrupt-controller",
&ks_pcie->num_msi_host_irqs);
if (ret)
return ret;
}
pp->root_bus_nr = -1;
pp->ops = &keystone_pcie_host_ops;
ret = ks_dw_pcie_host_init(ks_pcie, ks_pcie->msi_intc_np);
if (ret) {
dev_err(&pdev->dev, "failed to initialize host\n");
return ret;
}
return ret;
}
static const struct of_device_id ks_pcie_of_match[] = {
{
.type = "pci",
.compatible = "ti,keystone-pcie",
},
{ },
};
MODULE_DEVICE_TABLE(of, ks_pcie_of_match);
static int __exit ks_pcie_remove(struct platform_device *pdev)
{
struct keystone_pcie *ks_pcie = platform_get_drvdata(pdev);
clk_disable_unprepare(ks_pcie->clk);
return 0;
}
static int __init ks_pcie_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct keystone_pcie *ks_pcie;
struct pcie_port *pp;
struct resource *res;
void __iomem *reg_p;
struct phy *phy;
int ret = 0;
ks_pcie = devm_kzalloc(&pdev->dev, sizeof(*ks_pcie),
GFP_KERNEL);
if (!ks_pcie) {
dev_err(dev, "no memory for keystone pcie\n");
return -ENOMEM;
}
pp = &ks_pcie->pp;
/* initialize SerDes Phy if present */
phy = devm_phy_get(dev, "pcie-phy");
if (!IS_ERR_OR_NULL(phy)) {
ret = phy_init(phy);
if (ret < 0)
return ret;
}
/* index 2 is to read PCI DEVICE_ID */
res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
reg_p = devm_ioremap_resource(dev, res);
if (IS_ERR(reg_p))
return PTR_ERR(reg_p);
ks_pcie->va_reg_pciid = reg_p;
pp->dev = dev;
platform_set_drvdata(pdev, ks_pcie);
ks_pcie->clk = devm_clk_get(dev, "pcie");
if (IS_ERR(ks_pcie->clk)) {
dev_err(dev, "Failed to get pcie rc clock\n");
return PTR_ERR(ks_pcie->clk);
}
ret = clk_prepare_enable(ks_pcie->clk);
if (ret)
return ret;
ret = ks_add_pcie_port(ks_pcie, pdev);
if (ret < 0)
goto fail_clk;
return 0;
fail_clk:
clk_disable_unprepare(ks_pcie->clk);
return ret;
}
static struct platform_driver ks_pcie_driver __refdata = {
.probe = ks_pcie_probe,
.remove = __exit_p(ks_pcie_remove),
.driver = {
.name = "keystone-pcie",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(ks_pcie_of_match),
},
};
module_platform_driver(ks_pcie_driver);
MODULE_AUTHOR("Murali Karicheri <m-karicheri2@ti.com>");
MODULE_DESCRIPTION("Keystone PCIe host controller driver");
MODULE_LICENSE("GPL v2");