mirror of
https://github.com/torvalds/linux.git
synced 2024-11-28 15:11:31 +00:00
d3eab82b55
The device's carrier status is controlled via the functions netif_carrier_on() and netif_carrier_off(). These set or clear a bit indicating the carrier (aka lower level link) is down, and if the state changed, they fire off a routing netlink event. Add a call to netif_carrier_off() before register_netdev() so that the newly created device will be set to carrier down. Then when the carrier comes up for the first time, a netlink event will be generated, as the carrier changed from down to up. Otherwise the initial carrier up will appear to be changing the status from up to up, and so no event is generated since that's not a change. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2139 lines
56 KiB
C
2139 lines
56 KiB
C
/*
|
|
* drivers/net/gianfar.c
|
|
*
|
|
* Gianfar Ethernet Driver
|
|
* This driver is designed for the non-CPM ethernet controllers
|
|
* on the 85xx and 83xx family of integrated processors
|
|
* Based on 8260_io/fcc_enet.c
|
|
*
|
|
* Author: Andy Fleming
|
|
* Maintainer: Kumar Gala
|
|
*
|
|
* Copyright (c) 2002-2006 Freescale Semiconductor, Inc.
|
|
* Copyright (c) 2007 MontaVista Software, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* Gianfar: AKA Lambda Draconis, "Dragon"
|
|
* RA 11 31 24.2
|
|
* Dec +69 19 52
|
|
* V 3.84
|
|
* B-V +1.62
|
|
*
|
|
* Theory of operation
|
|
*
|
|
* The driver is initialized through platform_device. Structures which
|
|
* define the configuration needed by the board are defined in a
|
|
* board structure in arch/ppc/platforms (though I do not
|
|
* discount the possibility that other architectures could one
|
|
* day be supported.
|
|
*
|
|
* The Gianfar Ethernet Controller uses a ring of buffer
|
|
* descriptors. The beginning is indicated by a register
|
|
* pointing to the physical address of the start of the ring.
|
|
* The end is determined by a "wrap" bit being set in the
|
|
* last descriptor of the ring.
|
|
*
|
|
* When a packet is received, the RXF bit in the
|
|
* IEVENT register is set, triggering an interrupt when the
|
|
* corresponding bit in the IMASK register is also set (if
|
|
* interrupt coalescing is active, then the interrupt may not
|
|
* happen immediately, but will wait until either a set number
|
|
* of frames or amount of time have passed). In NAPI, the
|
|
* interrupt handler will signal there is work to be done, and
|
|
* exit. This method will start at the last known empty
|
|
* descriptor, and process every subsequent descriptor until there
|
|
* are none left with data (NAPI will stop after a set number of
|
|
* packets to give time to other tasks, but will eventually
|
|
* process all the packets). The data arrives inside a
|
|
* pre-allocated skb, and so after the skb is passed up to the
|
|
* stack, a new skb must be allocated, and the address field in
|
|
* the buffer descriptor must be updated to indicate this new
|
|
* skb.
|
|
*
|
|
* When the kernel requests that a packet be transmitted, the
|
|
* driver starts where it left off last time, and points the
|
|
* descriptor at the buffer which was passed in. The driver
|
|
* then informs the DMA engine that there are packets ready to
|
|
* be transmitted. Once the controller is finished transmitting
|
|
* the packet, an interrupt may be triggered (under the same
|
|
* conditions as for reception, but depending on the TXF bit).
|
|
* The driver then cleans up the buffer.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/unistd.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/if_vlan.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/ip.h>
|
|
#include <linux/tcp.h>
|
|
#include <linux/udp.h>
|
|
#include <linux/in.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/uaccess.h>
|
|
#include <linux/module.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/phy.h>
|
|
|
|
#include "gianfar.h"
|
|
#include "gianfar_mii.h"
|
|
|
|
#define TX_TIMEOUT (1*HZ)
|
|
#undef BRIEF_GFAR_ERRORS
|
|
#undef VERBOSE_GFAR_ERRORS
|
|
|
|
const char gfar_driver_name[] = "Gianfar Ethernet";
|
|
const char gfar_driver_version[] = "1.3";
|
|
|
|
static int gfar_enet_open(struct net_device *dev);
|
|
static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev);
|
|
static void gfar_reset_task(struct work_struct *work);
|
|
static void gfar_timeout(struct net_device *dev);
|
|
static int gfar_close(struct net_device *dev);
|
|
struct sk_buff *gfar_new_skb(struct net_device *dev);
|
|
static void gfar_new_rxbdp(struct net_device *dev, struct rxbd8 *bdp,
|
|
struct sk_buff *skb);
|
|
static int gfar_set_mac_address(struct net_device *dev);
|
|
static int gfar_change_mtu(struct net_device *dev, int new_mtu);
|
|
static irqreturn_t gfar_error(int irq, void *dev_id);
|
|
static irqreturn_t gfar_transmit(int irq, void *dev_id);
|
|
static irqreturn_t gfar_interrupt(int irq, void *dev_id);
|
|
static void adjust_link(struct net_device *dev);
|
|
static void init_registers(struct net_device *dev);
|
|
static int init_phy(struct net_device *dev);
|
|
static int gfar_probe(struct platform_device *pdev);
|
|
static int gfar_remove(struct platform_device *pdev);
|
|
static void free_skb_resources(struct gfar_private *priv);
|
|
static void gfar_set_multi(struct net_device *dev);
|
|
static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr);
|
|
static void gfar_configure_serdes(struct net_device *dev);
|
|
static int gfar_poll(struct napi_struct *napi, int budget);
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
static void gfar_netpoll(struct net_device *dev);
|
|
#endif
|
|
int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit);
|
|
static int gfar_clean_tx_ring(struct net_device *dev);
|
|
static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, int length);
|
|
static void gfar_vlan_rx_register(struct net_device *netdev,
|
|
struct vlan_group *grp);
|
|
void gfar_halt(struct net_device *dev);
|
|
static void gfar_halt_nodisable(struct net_device *dev);
|
|
void gfar_start(struct net_device *dev);
|
|
static void gfar_clear_exact_match(struct net_device *dev);
|
|
static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr);
|
|
|
|
extern const struct ethtool_ops gfar_ethtool_ops;
|
|
|
|
MODULE_AUTHOR("Freescale Semiconductor, Inc");
|
|
MODULE_DESCRIPTION("Gianfar Ethernet Driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
/* Returns 1 if incoming frames use an FCB */
|
|
static inline int gfar_uses_fcb(struct gfar_private *priv)
|
|
{
|
|
return (priv->vlan_enable || priv->rx_csum_enable);
|
|
}
|
|
|
|
/* Set up the ethernet device structure, private data,
|
|
* and anything else we need before we start */
|
|
static int gfar_probe(struct platform_device *pdev)
|
|
{
|
|
u32 tempval;
|
|
struct net_device *dev = NULL;
|
|
struct gfar_private *priv = NULL;
|
|
struct gianfar_platform_data *einfo;
|
|
struct resource *r;
|
|
int err = 0;
|
|
DECLARE_MAC_BUF(mac);
|
|
|
|
einfo = (struct gianfar_platform_data *) pdev->dev.platform_data;
|
|
|
|
if (NULL == einfo) {
|
|
printk(KERN_ERR "gfar %d: Missing additional data!\n",
|
|
pdev->id);
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Create an ethernet device instance */
|
|
dev = alloc_etherdev(sizeof (*priv));
|
|
|
|
if (NULL == dev)
|
|
return -ENOMEM;
|
|
|
|
priv = netdev_priv(dev);
|
|
priv->dev = dev;
|
|
|
|
/* Set the info in the priv to the current info */
|
|
priv->einfo = einfo;
|
|
|
|
/* fill out IRQ fields */
|
|
if (einfo->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) {
|
|
priv->interruptTransmit = platform_get_irq_byname(pdev, "tx");
|
|
priv->interruptReceive = platform_get_irq_byname(pdev, "rx");
|
|
priv->interruptError = platform_get_irq_byname(pdev, "error");
|
|
if (priv->interruptTransmit < 0 || priv->interruptReceive < 0 || priv->interruptError < 0)
|
|
goto regs_fail;
|
|
} else {
|
|
priv->interruptTransmit = platform_get_irq(pdev, 0);
|
|
if (priv->interruptTransmit < 0)
|
|
goto regs_fail;
|
|
}
|
|
|
|
/* get a pointer to the register memory */
|
|
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
priv->regs = ioremap(r->start, sizeof (struct gfar));
|
|
|
|
if (NULL == priv->regs) {
|
|
err = -ENOMEM;
|
|
goto regs_fail;
|
|
}
|
|
|
|
spin_lock_init(&priv->txlock);
|
|
spin_lock_init(&priv->rxlock);
|
|
spin_lock_init(&priv->bflock);
|
|
INIT_WORK(&priv->reset_task, gfar_reset_task);
|
|
|
|
platform_set_drvdata(pdev, dev);
|
|
|
|
/* Stop the DMA engine now, in case it was running before */
|
|
/* (The firmware could have used it, and left it running). */
|
|
/* To do this, we write Graceful Receive Stop and Graceful */
|
|
/* Transmit Stop, and then wait until the corresponding bits */
|
|
/* in IEVENT indicate the stops have completed. */
|
|
tempval = gfar_read(&priv->regs->dmactrl);
|
|
tempval &= ~(DMACTRL_GRS | DMACTRL_GTS);
|
|
gfar_write(&priv->regs->dmactrl, tempval);
|
|
|
|
tempval = gfar_read(&priv->regs->dmactrl);
|
|
tempval |= (DMACTRL_GRS | DMACTRL_GTS);
|
|
gfar_write(&priv->regs->dmactrl, tempval);
|
|
|
|
while (!(gfar_read(&priv->regs->ievent) & (IEVENT_GRSC | IEVENT_GTSC)))
|
|
cpu_relax();
|
|
|
|
/* Reset MAC layer */
|
|
gfar_write(&priv->regs->maccfg1, MACCFG1_SOFT_RESET);
|
|
|
|
tempval = (MACCFG1_TX_FLOW | MACCFG1_RX_FLOW);
|
|
gfar_write(&priv->regs->maccfg1, tempval);
|
|
|
|
/* Initialize MACCFG2. */
|
|
gfar_write(&priv->regs->maccfg2, MACCFG2_INIT_SETTINGS);
|
|
|
|
/* Initialize ECNTRL */
|
|
gfar_write(&priv->regs->ecntrl, ECNTRL_INIT_SETTINGS);
|
|
|
|
/* Copy the station address into the dev structure, */
|
|
memcpy(dev->dev_addr, einfo->mac_addr, MAC_ADDR_LEN);
|
|
|
|
/* Set the dev->base_addr to the gfar reg region */
|
|
dev->base_addr = (unsigned long) (priv->regs);
|
|
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
|
|
/* Fill in the dev structure */
|
|
dev->open = gfar_enet_open;
|
|
dev->hard_start_xmit = gfar_start_xmit;
|
|
dev->tx_timeout = gfar_timeout;
|
|
dev->watchdog_timeo = TX_TIMEOUT;
|
|
netif_napi_add(dev, &priv->napi, gfar_poll, GFAR_DEV_WEIGHT);
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
dev->poll_controller = gfar_netpoll;
|
|
#endif
|
|
dev->stop = gfar_close;
|
|
dev->change_mtu = gfar_change_mtu;
|
|
dev->mtu = 1500;
|
|
dev->set_multicast_list = gfar_set_multi;
|
|
|
|
dev->ethtool_ops = &gfar_ethtool_ops;
|
|
|
|
if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_CSUM) {
|
|
priv->rx_csum_enable = 1;
|
|
dev->features |= NETIF_F_IP_CSUM;
|
|
} else
|
|
priv->rx_csum_enable = 0;
|
|
|
|
priv->vlgrp = NULL;
|
|
|
|
if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_VLAN) {
|
|
dev->vlan_rx_register = gfar_vlan_rx_register;
|
|
|
|
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
|
|
|
|
priv->vlan_enable = 1;
|
|
}
|
|
|
|
if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_EXTENDED_HASH) {
|
|
priv->extended_hash = 1;
|
|
priv->hash_width = 9;
|
|
|
|
priv->hash_regs[0] = &priv->regs->igaddr0;
|
|
priv->hash_regs[1] = &priv->regs->igaddr1;
|
|
priv->hash_regs[2] = &priv->regs->igaddr2;
|
|
priv->hash_regs[3] = &priv->regs->igaddr3;
|
|
priv->hash_regs[4] = &priv->regs->igaddr4;
|
|
priv->hash_regs[5] = &priv->regs->igaddr5;
|
|
priv->hash_regs[6] = &priv->regs->igaddr6;
|
|
priv->hash_regs[7] = &priv->regs->igaddr7;
|
|
priv->hash_regs[8] = &priv->regs->gaddr0;
|
|
priv->hash_regs[9] = &priv->regs->gaddr1;
|
|
priv->hash_regs[10] = &priv->regs->gaddr2;
|
|
priv->hash_regs[11] = &priv->regs->gaddr3;
|
|
priv->hash_regs[12] = &priv->regs->gaddr4;
|
|
priv->hash_regs[13] = &priv->regs->gaddr5;
|
|
priv->hash_regs[14] = &priv->regs->gaddr6;
|
|
priv->hash_regs[15] = &priv->regs->gaddr7;
|
|
|
|
} else {
|
|
priv->extended_hash = 0;
|
|
priv->hash_width = 8;
|
|
|
|
priv->hash_regs[0] = &priv->regs->gaddr0;
|
|
priv->hash_regs[1] = &priv->regs->gaddr1;
|
|
priv->hash_regs[2] = &priv->regs->gaddr2;
|
|
priv->hash_regs[3] = &priv->regs->gaddr3;
|
|
priv->hash_regs[4] = &priv->regs->gaddr4;
|
|
priv->hash_regs[5] = &priv->regs->gaddr5;
|
|
priv->hash_regs[6] = &priv->regs->gaddr6;
|
|
priv->hash_regs[7] = &priv->regs->gaddr7;
|
|
}
|
|
|
|
if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_PADDING)
|
|
priv->padding = DEFAULT_PADDING;
|
|
else
|
|
priv->padding = 0;
|
|
|
|
if (dev->features & NETIF_F_IP_CSUM)
|
|
dev->hard_header_len += GMAC_FCB_LEN;
|
|
|
|
priv->rx_buffer_size = DEFAULT_RX_BUFFER_SIZE;
|
|
priv->tx_ring_size = DEFAULT_TX_RING_SIZE;
|
|
priv->rx_ring_size = DEFAULT_RX_RING_SIZE;
|
|
|
|
priv->txcoalescing = DEFAULT_TX_COALESCE;
|
|
priv->txcount = DEFAULT_TXCOUNT;
|
|
priv->txtime = DEFAULT_TXTIME;
|
|
priv->rxcoalescing = DEFAULT_RX_COALESCE;
|
|
priv->rxcount = DEFAULT_RXCOUNT;
|
|
priv->rxtime = DEFAULT_RXTIME;
|
|
|
|
/* Enable most messages by default */
|
|
priv->msg_enable = (NETIF_MSG_IFUP << 1 ) - 1;
|
|
|
|
/* Carrier starts down, phylib will bring it up */
|
|
netif_carrier_off(dev);
|
|
|
|
err = register_netdev(dev);
|
|
|
|
if (err) {
|
|
printk(KERN_ERR "%s: Cannot register net device, aborting.\n",
|
|
dev->name);
|
|
goto register_fail;
|
|
}
|
|
|
|
/* Create all the sysfs files */
|
|
gfar_init_sysfs(dev);
|
|
|
|
/* Print out the device info */
|
|
printk(KERN_INFO DEVICE_NAME "%s\n",
|
|
dev->name, print_mac(mac, dev->dev_addr));
|
|
|
|
/* Even more device info helps when determining which kernel */
|
|
/* provided which set of benchmarks. */
|
|
printk(KERN_INFO "%s: Running with NAPI enabled\n", dev->name);
|
|
printk(KERN_INFO "%s: %d/%d RX/TX BD ring size\n",
|
|
dev->name, priv->rx_ring_size, priv->tx_ring_size);
|
|
|
|
return 0;
|
|
|
|
register_fail:
|
|
iounmap(priv->regs);
|
|
regs_fail:
|
|
free_netdev(dev);
|
|
return err;
|
|
}
|
|
|
|
static int gfar_remove(struct platform_device *pdev)
|
|
{
|
|
struct net_device *dev = platform_get_drvdata(pdev);
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
iounmap(priv->regs);
|
|
free_netdev(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int gfar_suspend(struct platform_device *pdev, pm_message_t state)
|
|
{
|
|
struct net_device *dev = platform_get_drvdata(pdev);
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
unsigned long flags;
|
|
u32 tempval;
|
|
|
|
int magic_packet = priv->wol_en &&
|
|
(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET);
|
|
|
|
netif_device_detach(dev);
|
|
|
|
if (netif_running(dev)) {
|
|
spin_lock_irqsave(&priv->txlock, flags);
|
|
spin_lock(&priv->rxlock);
|
|
|
|
gfar_halt_nodisable(dev);
|
|
|
|
/* Disable Tx, and Rx if wake-on-LAN is disabled. */
|
|
tempval = gfar_read(&priv->regs->maccfg1);
|
|
|
|
tempval &= ~MACCFG1_TX_EN;
|
|
|
|
if (!magic_packet)
|
|
tempval &= ~MACCFG1_RX_EN;
|
|
|
|
gfar_write(&priv->regs->maccfg1, tempval);
|
|
|
|
spin_unlock(&priv->rxlock);
|
|
spin_unlock_irqrestore(&priv->txlock, flags);
|
|
|
|
napi_disable(&priv->napi);
|
|
|
|
if (magic_packet) {
|
|
/* Enable interrupt on Magic Packet */
|
|
gfar_write(&priv->regs->imask, IMASK_MAG);
|
|
|
|
/* Enable Magic Packet mode */
|
|
tempval = gfar_read(&priv->regs->maccfg2);
|
|
tempval |= MACCFG2_MPEN;
|
|
gfar_write(&priv->regs->maccfg2, tempval);
|
|
} else {
|
|
phy_stop(priv->phydev);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gfar_resume(struct platform_device *pdev)
|
|
{
|
|
struct net_device *dev = platform_get_drvdata(pdev);
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
unsigned long flags;
|
|
u32 tempval;
|
|
int magic_packet = priv->wol_en &&
|
|
(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET);
|
|
|
|
if (!netif_running(dev)) {
|
|
netif_device_attach(dev);
|
|
return 0;
|
|
}
|
|
|
|
if (!magic_packet && priv->phydev)
|
|
phy_start(priv->phydev);
|
|
|
|
/* Disable Magic Packet mode, in case something
|
|
* else woke us up.
|
|
*/
|
|
|
|
spin_lock_irqsave(&priv->txlock, flags);
|
|
spin_lock(&priv->rxlock);
|
|
|
|
tempval = gfar_read(&priv->regs->maccfg2);
|
|
tempval &= ~MACCFG2_MPEN;
|
|
gfar_write(&priv->regs->maccfg2, tempval);
|
|
|
|
gfar_start(dev);
|
|
|
|
spin_unlock(&priv->rxlock);
|
|
spin_unlock_irqrestore(&priv->txlock, flags);
|
|
|
|
netif_device_attach(dev);
|
|
|
|
napi_enable(&priv->napi);
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
#define gfar_suspend NULL
|
|
#define gfar_resume NULL
|
|
#endif
|
|
|
|
/* Reads the controller's registers to determine what interface
|
|
* connects it to the PHY.
|
|
*/
|
|
static phy_interface_t gfar_get_interface(struct net_device *dev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
u32 ecntrl = gfar_read(&priv->regs->ecntrl);
|
|
|
|
if (ecntrl & ECNTRL_SGMII_MODE)
|
|
return PHY_INTERFACE_MODE_SGMII;
|
|
|
|
if (ecntrl & ECNTRL_TBI_MODE) {
|
|
if (ecntrl & ECNTRL_REDUCED_MODE)
|
|
return PHY_INTERFACE_MODE_RTBI;
|
|
else
|
|
return PHY_INTERFACE_MODE_TBI;
|
|
}
|
|
|
|
if (ecntrl & ECNTRL_REDUCED_MODE) {
|
|
if (ecntrl & ECNTRL_REDUCED_MII_MODE)
|
|
return PHY_INTERFACE_MODE_RMII;
|
|
else {
|
|
phy_interface_t interface = priv->einfo->interface;
|
|
|
|
/*
|
|
* This isn't autodetected right now, so it must
|
|
* be set by the device tree or platform code.
|
|
*/
|
|
if (interface == PHY_INTERFACE_MODE_RGMII_ID)
|
|
return PHY_INTERFACE_MODE_RGMII_ID;
|
|
|
|
return PHY_INTERFACE_MODE_RGMII;
|
|
}
|
|
}
|
|
|
|
if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT)
|
|
return PHY_INTERFACE_MODE_GMII;
|
|
|
|
return PHY_INTERFACE_MODE_MII;
|
|
}
|
|
|
|
|
|
/* Initializes driver's PHY state, and attaches to the PHY.
|
|
* Returns 0 on success.
|
|
*/
|
|
static int init_phy(struct net_device *dev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
uint gigabit_support =
|
|
priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ?
|
|
SUPPORTED_1000baseT_Full : 0;
|
|
struct phy_device *phydev;
|
|
char phy_id[BUS_ID_SIZE];
|
|
phy_interface_t interface;
|
|
|
|
priv->oldlink = 0;
|
|
priv->oldspeed = 0;
|
|
priv->oldduplex = -1;
|
|
|
|
snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, priv->einfo->bus_id, priv->einfo->phy_id);
|
|
|
|
interface = gfar_get_interface(dev);
|
|
|
|
phydev = phy_connect(dev, phy_id, &adjust_link, 0, interface);
|
|
|
|
if (interface == PHY_INTERFACE_MODE_SGMII)
|
|
gfar_configure_serdes(dev);
|
|
|
|
if (IS_ERR(phydev)) {
|
|
printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
|
|
return PTR_ERR(phydev);
|
|
}
|
|
|
|
/* Remove any features not supported by the controller */
|
|
phydev->supported &= (GFAR_SUPPORTED | gigabit_support);
|
|
phydev->advertising = phydev->supported;
|
|
|
|
priv->phydev = phydev;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Initialize TBI PHY interface for communicating with the
|
|
* SERDES lynx PHY on the chip. We communicate with this PHY
|
|
* through the MDIO bus on each controller, treating it as a
|
|
* "normal" PHY at the address found in the TBIPA register. We assume
|
|
* that the TBIPA register is valid. Either the MDIO bus code will set
|
|
* it to a value that doesn't conflict with other PHYs on the bus, or the
|
|
* value doesn't matter, as there are no other PHYs on the bus.
|
|
*/
|
|
static void gfar_configure_serdes(struct net_device *dev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
struct gfar_mii __iomem *regs =
|
|
(void __iomem *)&priv->regs->gfar_mii_regs;
|
|
int tbipa = gfar_read(&priv->regs->tbipa);
|
|
|
|
/* Single clk mode, mii mode off(for serdes communication) */
|
|
gfar_local_mdio_write(regs, tbipa, MII_TBICON, TBICON_CLK_SELECT);
|
|
|
|
gfar_local_mdio_write(regs, tbipa, MII_ADVERTISE,
|
|
ADVERTISE_1000XFULL | ADVERTISE_1000XPAUSE |
|
|
ADVERTISE_1000XPSE_ASYM);
|
|
|
|
gfar_local_mdio_write(regs, tbipa, MII_BMCR, BMCR_ANENABLE |
|
|
BMCR_ANRESTART | BMCR_FULLDPLX | BMCR_SPEED1000);
|
|
}
|
|
|
|
static void init_registers(struct net_device *dev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
|
|
/* Clear IEVENT */
|
|
gfar_write(&priv->regs->ievent, IEVENT_INIT_CLEAR);
|
|
|
|
/* Initialize IMASK */
|
|
gfar_write(&priv->regs->imask, IMASK_INIT_CLEAR);
|
|
|
|
/* Init hash registers to zero */
|
|
gfar_write(&priv->regs->igaddr0, 0);
|
|
gfar_write(&priv->regs->igaddr1, 0);
|
|
gfar_write(&priv->regs->igaddr2, 0);
|
|
gfar_write(&priv->regs->igaddr3, 0);
|
|
gfar_write(&priv->regs->igaddr4, 0);
|
|
gfar_write(&priv->regs->igaddr5, 0);
|
|
gfar_write(&priv->regs->igaddr6, 0);
|
|
gfar_write(&priv->regs->igaddr7, 0);
|
|
|
|
gfar_write(&priv->regs->gaddr0, 0);
|
|
gfar_write(&priv->regs->gaddr1, 0);
|
|
gfar_write(&priv->regs->gaddr2, 0);
|
|
gfar_write(&priv->regs->gaddr3, 0);
|
|
gfar_write(&priv->regs->gaddr4, 0);
|
|
gfar_write(&priv->regs->gaddr5, 0);
|
|
gfar_write(&priv->regs->gaddr6, 0);
|
|
gfar_write(&priv->regs->gaddr7, 0);
|
|
|
|
/* Zero out the rmon mib registers if it has them */
|
|
if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_RMON) {
|
|
memset_io(&(priv->regs->rmon), 0, sizeof (struct rmon_mib));
|
|
|
|
/* Mask off the CAM interrupts */
|
|
gfar_write(&priv->regs->rmon.cam1, 0xffffffff);
|
|
gfar_write(&priv->regs->rmon.cam2, 0xffffffff);
|
|
}
|
|
|
|
/* Initialize the max receive buffer length */
|
|
gfar_write(&priv->regs->mrblr, priv->rx_buffer_size);
|
|
|
|
/* Initialize the Minimum Frame Length Register */
|
|
gfar_write(&priv->regs->minflr, MINFLR_INIT_SETTINGS);
|
|
}
|
|
|
|
|
|
/* Halt the receive and transmit queues */
|
|
static void gfar_halt_nodisable(struct net_device *dev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
struct gfar __iomem *regs = priv->regs;
|
|
u32 tempval;
|
|
|
|
/* Mask all interrupts */
|
|
gfar_write(®s->imask, IMASK_INIT_CLEAR);
|
|
|
|
/* Clear all interrupts */
|
|
gfar_write(®s->ievent, IEVENT_INIT_CLEAR);
|
|
|
|
/* Stop the DMA, and wait for it to stop */
|
|
tempval = gfar_read(&priv->regs->dmactrl);
|
|
if ((tempval & (DMACTRL_GRS | DMACTRL_GTS))
|
|
!= (DMACTRL_GRS | DMACTRL_GTS)) {
|
|
tempval |= (DMACTRL_GRS | DMACTRL_GTS);
|
|
gfar_write(&priv->regs->dmactrl, tempval);
|
|
|
|
while (!(gfar_read(&priv->regs->ievent) &
|
|
(IEVENT_GRSC | IEVENT_GTSC)))
|
|
cpu_relax();
|
|
}
|
|
}
|
|
|
|
/* Halt the receive and transmit queues */
|
|
void gfar_halt(struct net_device *dev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
struct gfar __iomem *regs = priv->regs;
|
|
u32 tempval;
|
|
|
|
gfar_halt_nodisable(dev);
|
|
|
|
/* Disable Rx and Tx */
|
|
tempval = gfar_read(®s->maccfg1);
|
|
tempval &= ~(MACCFG1_RX_EN | MACCFG1_TX_EN);
|
|
gfar_write(®s->maccfg1, tempval);
|
|
}
|
|
|
|
void stop_gfar(struct net_device *dev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
struct gfar __iomem *regs = priv->regs;
|
|
unsigned long flags;
|
|
|
|
phy_stop(priv->phydev);
|
|
|
|
/* Lock it down */
|
|
spin_lock_irqsave(&priv->txlock, flags);
|
|
spin_lock(&priv->rxlock);
|
|
|
|
gfar_halt(dev);
|
|
|
|
spin_unlock(&priv->rxlock);
|
|
spin_unlock_irqrestore(&priv->txlock, flags);
|
|
|
|
/* Free the IRQs */
|
|
if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) {
|
|
free_irq(priv->interruptError, dev);
|
|
free_irq(priv->interruptTransmit, dev);
|
|
free_irq(priv->interruptReceive, dev);
|
|
} else {
|
|
free_irq(priv->interruptTransmit, dev);
|
|
}
|
|
|
|
free_skb_resources(priv);
|
|
|
|
dma_free_coherent(&dev->dev,
|
|
sizeof(struct txbd8)*priv->tx_ring_size
|
|
+ sizeof(struct rxbd8)*priv->rx_ring_size,
|
|
priv->tx_bd_base,
|
|
gfar_read(®s->tbase0));
|
|
}
|
|
|
|
/* If there are any tx skbs or rx skbs still around, free them.
|
|
* Then free tx_skbuff and rx_skbuff */
|
|
static void free_skb_resources(struct gfar_private *priv)
|
|
{
|
|
struct rxbd8 *rxbdp;
|
|
struct txbd8 *txbdp;
|
|
int i;
|
|
|
|
/* Go through all the buffer descriptors and free their data buffers */
|
|
txbdp = priv->tx_bd_base;
|
|
|
|
for (i = 0; i < priv->tx_ring_size; i++) {
|
|
|
|
if (priv->tx_skbuff[i]) {
|
|
dma_unmap_single(&priv->dev->dev, txbdp->bufPtr,
|
|
txbdp->length,
|
|
DMA_TO_DEVICE);
|
|
dev_kfree_skb_any(priv->tx_skbuff[i]);
|
|
priv->tx_skbuff[i] = NULL;
|
|
}
|
|
|
|
txbdp++;
|
|
}
|
|
|
|
kfree(priv->tx_skbuff);
|
|
|
|
rxbdp = priv->rx_bd_base;
|
|
|
|
/* rx_skbuff is not guaranteed to be allocated, so only
|
|
* free it and its contents if it is allocated */
|
|
if(priv->rx_skbuff != NULL) {
|
|
for (i = 0; i < priv->rx_ring_size; i++) {
|
|
if (priv->rx_skbuff[i]) {
|
|
dma_unmap_single(&priv->dev->dev, rxbdp->bufPtr,
|
|
priv->rx_buffer_size,
|
|
DMA_FROM_DEVICE);
|
|
|
|
dev_kfree_skb_any(priv->rx_skbuff[i]);
|
|
priv->rx_skbuff[i] = NULL;
|
|
}
|
|
|
|
rxbdp->status = 0;
|
|
rxbdp->length = 0;
|
|
rxbdp->bufPtr = 0;
|
|
|
|
rxbdp++;
|
|
}
|
|
|
|
kfree(priv->rx_skbuff);
|
|
}
|
|
}
|
|
|
|
void gfar_start(struct net_device *dev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
struct gfar __iomem *regs = priv->regs;
|
|
u32 tempval;
|
|
|
|
/* Enable Rx and Tx in MACCFG1 */
|
|
tempval = gfar_read(®s->maccfg1);
|
|
tempval |= (MACCFG1_RX_EN | MACCFG1_TX_EN);
|
|
gfar_write(®s->maccfg1, tempval);
|
|
|
|
/* Initialize DMACTRL to have WWR and WOP */
|
|
tempval = gfar_read(&priv->regs->dmactrl);
|
|
tempval |= DMACTRL_INIT_SETTINGS;
|
|
gfar_write(&priv->regs->dmactrl, tempval);
|
|
|
|
/* Make sure we aren't stopped */
|
|
tempval = gfar_read(&priv->regs->dmactrl);
|
|
tempval &= ~(DMACTRL_GRS | DMACTRL_GTS);
|
|
gfar_write(&priv->regs->dmactrl, tempval);
|
|
|
|
/* Clear THLT/RHLT, so that the DMA starts polling now */
|
|
gfar_write(®s->tstat, TSTAT_CLEAR_THALT);
|
|
gfar_write(®s->rstat, RSTAT_CLEAR_RHALT);
|
|
|
|
/* Unmask the interrupts we look for */
|
|
gfar_write(®s->imask, IMASK_DEFAULT);
|
|
}
|
|
|
|
/* Bring the controller up and running */
|
|
int startup_gfar(struct net_device *dev)
|
|
{
|
|
struct txbd8 *txbdp;
|
|
struct rxbd8 *rxbdp;
|
|
dma_addr_t addr = 0;
|
|
unsigned long vaddr;
|
|
int i;
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
struct gfar __iomem *regs = priv->regs;
|
|
int err = 0;
|
|
u32 rctrl = 0;
|
|
u32 attrs = 0;
|
|
|
|
gfar_write(®s->imask, IMASK_INIT_CLEAR);
|
|
|
|
/* Allocate memory for the buffer descriptors */
|
|
vaddr = (unsigned long) dma_alloc_coherent(&dev->dev,
|
|
sizeof (struct txbd8) * priv->tx_ring_size +
|
|
sizeof (struct rxbd8) * priv->rx_ring_size,
|
|
&addr, GFP_KERNEL);
|
|
|
|
if (vaddr == 0) {
|
|
if (netif_msg_ifup(priv))
|
|
printk(KERN_ERR "%s: Could not allocate buffer descriptors!\n",
|
|
dev->name);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
priv->tx_bd_base = (struct txbd8 *) vaddr;
|
|
|
|
/* enet DMA only understands physical addresses */
|
|
gfar_write(®s->tbase0, addr);
|
|
|
|
/* Start the rx descriptor ring where the tx ring leaves off */
|
|
addr = addr + sizeof (struct txbd8) * priv->tx_ring_size;
|
|
vaddr = vaddr + sizeof (struct txbd8) * priv->tx_ring_size;
|
|
priv->rx_bd_base = (struct rxbd8 *) vaddr;
|
|
gfar_write(®s->rbase0, addr);
|
|
|
|
/* Setup the skbuff rings */
|
|
priv->tx_skbuff =
|
|
(struct sk_buff **) kmalloc(sizeof (struct sk_buff *) *
|
|
priv->tx_ring_size, GFP_KERNEL);
|
|
|
|
if (NULL == priv->tx_skbuff) {
|
|
if (netif_msg_ifup(priv))
|
|
printk(KERN_ERR "%s: Could not allocate tx_skbuff\n",
|
|
dev->name);
|
|
err = -ENOMEM;
|
|
goto tx_skb_fail;
|
|
}
|
|
|
|
for (i = 0; i < priv->tx_ring_size; i++)
|
|
priv->tx_skbuff[i] = NULL;
|
|
|
|
priv->rx_skbuff =
|
|
(struct sk_buff **) kmalloc(sizeof (struct sk_buff *) *
|
|
priv->rx_ring_size, GFP_KERNEL);
|
|
|
|
if (NULL == priv->rx_skbuff) {
|
|
if (netif_msg_ifup(priv))
|
|
printk(KERN_ERR "%s: Could not allocate rx_skbuff\n",
|
|
dev->name);
|
|
err = -ENOMEM;
|
|
goto rx_skb_fail;
|
|
}
|
|
|
|
for (i = 0; i < priv->rx_ring_size; i++)
|
|
priv->rx_skbuff[i] = NULL;
|
|
|
|
/* Initialize some variables in our dev structure */
|
|
priv->dirty_tx = priv->cur_tx = priv->tx_bd_base;
|
|
priv->cur_rx = priv->rx_bd_base;
|
|
priv->skb_curtx = priv->skb_dirtytx = 0;
|
|
priv->skb_currx = 0;
|
|
|
|
/* Initialize Transmit Descriptor Ring */
|
|
txbdp = priv->tx_bd_base;
|
|
for (i = 0; i < priv->tx_ring_size; i++) {
|
|
txbdp->status = 0;
|
|
txbdp->length = 0;
|
|
txbdp->bufPtr = 0;
|
|
txbdp++;
|
|
}
|
|
|
|
/* Set the last descriptor in the ring to indicate wrap */
|
|
txbdp--;
|
|
txbdp->status |= TXBD_WRAP;
|
|
|
|
rxbdp = priv->rx_bd_base;
|
|
for (i = 0; i < priv->rx_ring_size; i++) {
|
|
struct sk_buff *skb;
|
|
|
|
skb = gfar_new_skb(dev);
|
|
|
|
if (!skb) {
|
|
printk(KERN_ERR "%s: Can't allocate RX buffers\n",
|
|
dev->name);
|
|
|
|
goto err_rxalloc_fail;
|
|
}
|
|
|
|
priv->rx_skbuff[i] = skb;
|
|
|
|
gfar_new_rxbdp(dev, rxbdp, skb);
|
|
|
|
rxbdp++;
|
|
}
|
|
|
|
/* Set the last descriptor in the ring to wrap */
|
|
rxbdp--;
|
|
rxbdp->status |= RXBD_WRAP;
|
|
|
|
/* If the device has multiple interrupts, register for
|
|
* them. Otherwise, only register for the one */
|
|
if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) {
|
|
/* Install our interrupt handlers for Error,
|
|
* Transmit, and Receive */
|
|
if (request_irq(priv->interruptError, gfar_error,
|
|
0, "enet_error", dev) < 0) {
|
|
if (netif_msg_intr(priv))
|
|
printk(KERN_ERR "%s: Can't get IRQ %d\n",
|
|
dev->name, priv->interruptError);
|
|
|
|
err = -1;
|
|
goto err_irq_fail;
|
|
}
|
|
|
|
if (request_irq(priv->interruptTransmit, gfar_transmit,
|
|
0, "enet_tx", dev) < 0) {
|
|
if (netif_msg_intr(priv))
|
|
printk(KERN_ERR "%s: Can't get IRQ %d\n",
|
|
dev->name, priv->interruptTransmit);
|
|
|
|
err = -1;
|
|
|
|
goto tx_irq_fail;
|
|
}
|
|
|
|
if (request_irq(priv->interruptReceive, gfar_receive,
|
|
0, "enet_rx", dev) < 0) {
|
|
if (netif_msg_intr(priv))
|
|
printk(KERN_ERR "%s: Can't get IRQ %d (receive0)\n",
|
|
dev->name, priv->interruptReceive);
|
|
|
|
err = -1;
|
|
goto rx_irq_fail;
|
|
}
|
|
} else {
|
|
if (request_irq(priv->interruptTransmit, gfar_interrupt,
|
|
0, "gfar_interrupt", dev) < 0) {
|
|
if (netif_msg_intr(priv))
|
|
printk(KERN_ERR "%s: Can't get IRQ %d\n",
|
|
dev->name, priv->interruptError);
|
|
|
|
err = -1;
|
|
goto err_irq_fail;
|
|
}
|
|
}
|
|
|
|
phy_start(priv->phydev);
|
|
|
|
/* Configure the coalescing support */
|
|
if (priv->txcoalescing)
|
|
gfar_write(®s->txic,
|
|
mk_ic_value(priv->txcount, priv->txtime));
|
|
else
|
|
gfar_write(®s->txic, 0);
|
|
|
|
if (priv->rxcoalescing)
|
|
gfar_write(®s->rxic,
|
|
mk_ic_value(priv->rxcount, priv->rxtime));
|
|
else
|
|
gfar_write(®s->rxic, 0);
|
|
|
|
if (priv->rx_csum_enable)
|
|
rctrl |= RCTRL_CHECKSUMMING;
|
|
|
|
if (priv->extended_hash) {
|
|
rctrl |= RCTRL_EXTHASH;
|
|
|
|
gfar_clear_exact_match(dev);
|
|
rctrl |= RCTRL_EMEN;
|
|
}
|
|
|
|
if (priv->vlan_enable)
|
|
rctrl |= RCTRL_VLAN;
|
|
|
|
if (priv->padding) {
|
|
rctrl &= ~RCTRL_PAL_MASK;
|
|
rctrl |= RCTRL_PADDING(priv->padding);
|
|
}
|
|
|
|
/* Init rctrl based on our settings */
|
|
gfar_write(&priv->regs->rctrl, rctrl);
|
|
|
|
if (dev->features & NETIF_F_IP_CSUM)
|
|
gfar_write(&priv->regs->tctrl, TCTRL_INIT_CSUM);
|
|
|
|
/* Set the extraction length and index */
|
|
attrs = ATTRELI_EL(priv->rx_stash_size) |
|
|
ATTRELI_EI(priv->rx_stash_index);
|
|
|
|
gfar_write(&priv->regs->attreli, attrs);
|
|
|
|
/* Start with defaults, and add stashing or locking
|
|
* depending on the approprate variables */
|
|
attrs = ATTR_INIT_SETTINGS;
|
|
|
|
if (priv->bd_stash_en)
|
|
attrs |= ATTR_BDSTASH;
|
|
|
|
if (priv->rx_stash_size != 0)
|
|
attrs |= ATTR_BUFSTASH;
|
|
|
|
gfar_write(&priv->regs->attr, attrs);
|
|
|
|
gfar_write(&priv->regs->fifo_tx_thr, priv->fifo_threshold);
|
|
gfar_write(&priv->regs->fifo_tx_starve, priv->fifo_starve);
|
|
gfar_write(&priv->regs->fifo_tx_starve_shutoff, priv->fifo_starve_off);
|
|
|
|
/* Start the controller */
|
|
gfar_start(dev);
|
|
|
|
return 0;
|
|
|
|
rx_irq_fail:
|
|
free_irq(priv->interruptTransmit, dev);
|
|
tx_irq_fail:
|
|
free_irq(priv->interruptError, dev);
|
|
err_irq_fail:
|
|
err_rxalloc_fail:
|
|
rx_skb_fail:
|
|
free_skb_resources(priv);
|
|
tx_skb_fail:
|
|
dma_free_coherent(&dev->dev,
|
|
sizeof(struct txbd8)*priv->tx_ring_size
|
|
+ sizeof(struct rxbd8)*priv->rx_ring_size,
|
|
priv->tx_bd_base,
|
|
gfar_read(®s->tbase0));
|
|
|
|
return err;
|
|
}
|
|
|
|
/* Called when something needs to use the ethernet device */
|
|
/* Returns 0 for success. */
|
|
static int gfar_enet_open(struct net_device *dev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
int err;
|
|
|
|
napi_enable(&priv->napi);
|
|
|
|
/* Initialize a bunch of registers */
|
|
init_registers(dev);
|
|
|
|
gfar_set_mac_address(dev);
|
|
|
|
err = init_phy(dev);
|
|
|
|
if(err) {
|
|
napi_disable(&priv->napi);
|
|
return err;
|
|
}
|
|
|
|
err = startup_gfar(dev);
|
|
if (err) {
|
|
napi_disable(&priv->napi);
|
|
return err;
|
|
}
|
|
|
|
netif_start_queue(dev);
|
|
|
|
return err;
|
|
}
|
|
|
|
static inline struct txfcb *gfar_add_fcb(struct sk_buff *skb, struct txbd8 *bdp)
|
|
{
|
|
struct txfcb *fcb = (struct txfcb *)skb_push (skb, GMAC_FCB_LEN);
|
|
|
|
memset(fcb, 0, GMAC_FCB_LEN);
|
|
|
|
return fcb;
|
|
}
|
|
|
|
static inline void gfar_tx_checksum(struct sk_buff *skb, struct txfcb *fcb)
|
|
{
|
|
u8 flags = 0;
|
|
|
|
/* If we're here, it's a IP packet with a TCP or UDP
|
|
* payload. We set it to checksum, using a pseudo-header
|
|
* we provide
|
|
*/
|
|
flags = TXFCB_DEFAULT;
|
|
|
|
/* Tell the controller what the protocol is */
|
|
/* And provide the already calculated phcs */
|
|
if (ip_hdr(skb)->protocol == IPPROTO_UDP) {
|
|
flags |= TXFCB_UDP;
|
|
fcb->phcs = udp_hdr(skb)->check;
|
|
} else
|
|
fcb->phcs = tcp_hdr(skb)->check;
|
|
|
|
/* l3os is the distance between the start of the
|
|
* frame (skb->data) and the start of the IP hdr.
|
|
* l4os is the distance between the start of the
|
|
* l3 hdr and the l4 hdr */
|
|
fcb->l3os = (u16)(skb_network_offset(skb) - GMAC_FCB_LEN);
|
|
fcb->l4os = skb_network_header_len(skb);
|
|
|
|
fcb->flags = flags;
|
|
}
|
|
|
|
void inline gfar_tx_vlan(struct sk_buff *skb, struct txfcb *fcb)
|
|
{
|
|
fcb->flags |= TXFCB_VLN;
|
|
fcb->vlctl = vlan_tx_tag_get(skb);
|
|
}
|
|
|
|
/* This is called by the kernel when a frame is ready for transmission. */
|
|
/* It is pointed to by the dev->hard_start_xmit function pointer */
|
|
static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
struct txfcb *fcb = NULL;
|
|
struct txbd8 *txbdp;
|
|
u16 status;
|
|
unsigned long flags;
|
|
|
|
/* Update transmit stats */
|
|
dev->stats.tx_bytes += skb->len;
|
|
|
|
/* Lock priv now */
|
|
spin_lock_irqsave(&priv->txlock, flags);
|
|
|
|
/* Point at the first free tx descriptor */
|
|
txbdp = priv->cur_tx;
|
|
|
|
/* Clear all but the WRAP status flags */
|
|
status = txbdp->status & TXBD_WRAP;
|
|
|
|
/* Set up checksumming */
|
|
if (likely((dev->features & NETIF_F_IP_CSUM)
|
|
&& (CHECKSUM_PARTIAL == skb->ip_summed))) {
|
|
fcb = gfar_add_fcb(skb, txbdp);
|
|
status |= TXBD_TOE;
|
|
gfar_tx_checksum(skb, fcb);
|
|
}
|
|
|
|
if (priv->vlan_enable &&
|
|
unlikely(priv->vlgrp && vlan_tx_tag_present(skb))) {
|
|
if (unlikely(NULL == fcb)) {
|
|
fcb = gfar_add_fcb(skb, txbdp);
|
|
status |= TXBD_TOE;
|
|
}
|
|
|
|
gfar_tx_vlan(skb, fcb);
|
|
}
|
|
|
|
/* Set buffer length and pointer */
|
|
txbdp->length = skb->len;
|
|
txbdp->bufPtr = dma_map_single(&dev->dev, skb->data,
|
|
skb->len, DMA_TO_DEVICE);
|
|
|
|
/* Save the skb pointer so we can free it later */
|
|
priv->tx_skbuff[priv->skb_curtx] = skb;
|
|
|
|
/* Update the current skb pointer (wrapping if this was the last) */
|
|
priv->skb_curtx =
|
|
(priv->skb_curtx + 1) & TX_RING_MOD_MASK(priv->tx_ring_size);
|
|
|
|
/* Flag the BD as interrupt-causing */
|
|
status |= TXBD_INTERRUPT;
|
|
|
|
/* Flag the BD as ready to go, last in frame, and */
|
|
/* in need of CRC */
|
|
status |= (TXBD_READY | TXBD_LAST | TXBD_CRC);
|
|
|
|
dev->trans_start = jiffies;
|
|
|
|
/* The powerpc-specific eieio() is used, as wmb() has too strong
|
|
* semantics (it requires synchronization between cacheable and
|
|
* uncacheable mappings, which eieio doesn't provide and which we
|
|
* don't need), thus requiring a more expensive sync instruction. At
|
|
* some point, the set of architecture-independent barrier functions
|
|
* should be expanded to include weaker barriers.
|
|
*/
|
|
|
|
eieio();
|
|
txbdp->status = status;
|
|
|
|
/* If this was the last BD in the ring, the next one */
|
|
/* is at the beginning of the ring */
|
|
if (txbdp->status & TXBD_WRAP)
|
|
txbdp = priv->tx_bd_base;
|
|
else
|
|
txbdp++;
|
|
|
|
/* If the next BD still needs to be cleaned up, then the bds
|
|
are full. We need to tell the kernel to stop sending us stuff. */
|
|
if (txbdp == priv->dirty_tx) {
|
|
netif_stop_queue(dev);
|
|
|
|
dev->stats.tx_fifo_errors++;
|
|
}
|
|
|
|
/* Update the current txbd to the next one */
|
|
priv->cur_tx = txbdp;
|
|
|
|
/* Tell the DMA to go go go */
|
|
gfar_write(&priv->regs->tstat, TSTAT_CLEAR_THALT);
|
|
|
|
/* Unlock priv */
|
|
spin_unlock_irqrestore(&priv->txlock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Stops the kernel queue, and halts the controller */
|
|
static int gfar_close(struct net_device *dev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
|
|
napi_disable(&priv->napi);
|
|
|
|
cancel_work_sync(&priv->reset_task);
|
|
stop_gfar(dev);
|
|
|
|
/* Disconnect from the PHY */
|
|
phy_disconnect(priv->phydev);
|
|
priv->phydev = NULL;
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Changes the mac address if the controller is not running. */
|
|
static int gfar_set_mac_address(struct net_device *dev)
|
|
{
|
|
gfar_set_mac_for_addr(dev, 0, dev->dev_addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* Enables and disables VLAN insertion/extraction */
|
|
static void gfar_vlan_rx_register(struct net_device *dev,
|
|
struct vlan_group *grp)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
unsigned long flags;
|
|
u32 tempval;
|
|
|
|
spin_lock_irqsave(&priv->rxlock, flags);
|
|
|
|
priv->vlgrp = grp;
|
|
|
|
if (grp) {
|
|
/* Enable VLAN tag insertion */
|
|
tempval = gfar_read(&priv->regs->tctrl);
|
|
tempval |= TCTRL_VLINS;
|
|
|
|
gfar_write(&priv->regs->tctrl, tempval);
|
|
|
|
/* Enable VLAN tag extraction */
|
|
tempval = gfar_read(&priv->regs->rctrl);
|
|
tempval |= RCTRL_VLEX;
|
|
gfar_write(&priv->regs->rctrl, tempval);
|
|
} else {
|
|
/* Disable VLAN tag insertion */
|
|
tempval = gfar_read(&priv->regs->tctrl);
|
|
tempval &= ~TCTRL_VLINS;
|
|
gfar_write(&priv->regs->tctrl, tempval);
|
|
|
|
/* Disable VLAN tag extraction */
|
|
tempval = gfar_read(&priv->regs->rctrl);
|
|
tempval &= ~RCTRL_VLEX;
|
|
gfar_write(&priv->regs->rctrl, tempval);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&priv->rxlock, flags);
|
|
}
|
|
|
|
static int gfar_change_mtu(struct net_device *dev, int new_mtu)
|
|
{
|
|
int tempsize, tempval;
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
int oldsize = priv->rx_buffer_size;
|
|
int frame_size = new_mtu + ETH_HLEN;
|
|
|
|
if (priv->vlan_enable)
|
|
frame_size += VLAN_HLEN;
|
|
|
|
if (gfar_uses_fcb(priv))
|
|
frame_size += GMAC_FCB_LEN;
|
|
|
|
frame_size += priv->padding;
|
|
|
|
if ((frame_size < 64) || (frame_size > JUMBO_FRAME_SIZE)) {
|
|
if (netif_msg_drv(priv))
|
|
printk(KERN_ERR "%s: Invalid MTU setting\n",
|
|
dev->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
tempsize =
|
|
(frame_size & ~(INCREMENTAL_BUFFER_SIZE - 1)) +
|
|
INCREMENTAL_BUFFER_SIZE;
|
|
|
|
/* Only stop and start the controller if it isn't already
|
|
* stopped, and we changed something */
|
|
if ((oldsize != tempsize) && (dev->flags & IFF_UP))
|
|
stop_gfar(dev);
|
|
|
|
priv->rx_buffer_size = tempsize;
|
|
|
|
dev->mtu = new_mtu;
|
|
|
|
gfar_write(&priv->regs->mrblr, priv->rx_buffer_size);
|
|
gfar_write(&priv->regs->maxfrm, priv->rx_buffer_size);
|
|
|
|
/* If the mtu is larger than the max size for standard
|
|
* ethernet frames (ie, a jumbo frame), then set maccfg2
|
|
* to allow huge frames, and to check the length */
|
|
tempval = gfar_read(&priv->regs->maccfg2);
|
|
|
|
if (priv->rx_buffer_size > DEFAULT_RX_BUFFER_SIZE)
|
|
tempval |= (MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK);
|
|
else
|
|
tempval &= ~(MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK);
|
|
|
|
gfar_write(&priv->regs->maccfg2, tempval);
|
|
|
|
if ((oldsize != tempsize) && (dev->flags & IFF_UP))
|
|
startup_gfar(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* gfar_reset_task gets scheduled when a packet has not been
|
|
* transmitted after a set amount of time.
|
|
* For now, assume that clearing out all the structures, and
|
|
* starting over will fix the problem.
|
|
*/
|
|
static void gfar_reset_task(struct work_struct *work)
|
|
{
|
|
struct gfar_private *priv = container_of(work, struct gfar_private,
|
|
reset_task);
|
|
struct net_device *dev = priv->dev;
|
|
|
|
if (dev->flags & IFF_UP) {
|
|
stop_gfar(dev);
|
|
startup_gfar(dev);
|
|
}
|
|
|
|
netif_tx_schedule_all(dev);
|
|
}
|
|
|
|
static void gfar_timeout(struct net_device *dev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
|
|
dev->stats.tx_errors++;
|
|
schedule_work(&priv->reset_task);
|
|
}
|
|
|
|
/* Interrupt Handler for Transmit complete */
|
|
static int gfar_clean_tx_ring(struct net_device *dev)
|
|
{
|
|
struct txbd8 *bdp;
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
int howmany = 0;
|
|
|
|
bdp = priv->dirty_tx;
|
|
while ((bdp->status & TXBD_READY) == 0) {
|
|
/* If dirty_tx and cur_tx are the same, then either the */
|
|
/* ring is empty or full now (it could only be full in the beginning, */
|
|
/* obviously). If it is empty, we are done. */
|
|
if ((bdp == priv->cur_tx) && (netif_queue_stopped(dev) == 0))
|
|
break;
|
|
|
|
howmany++;
|
|
|
|
/* Deferred means some collisions occurred during transmit, */
|
|
/* but we eventually sent the packet. */
|
|
if (bdp->status & TXBD_DEF)
|
|
dev->stats.collisions++;
|
|
|
|
/* Free the sk buffer associated with this TxBD */
|
|
dev_kfree_skb_irq(priv->tx_skbuff[priv->skb_dirtytx]);
|
|
|
|
priv->tx_skbuff[priv->skb_dirtytx] = NULL;
|
|
priv->skb_dirtytx =
|
|
(priv->skb_dirtytx +
|
|
1) & TX_RING_MOD_MASK(priv->tx_ring_size);
|
|
|
|
/* Clean BD length for empty detection */
|
|
bdp->length = 0;
|
|
|
|
/* update bdp to point at next bd in the ring (wrapping if necessary) */
|
|
if (bdp->status & TXBD_WRAP)
|
|
bdp = priv->tx_bd_base;
|
|
else
|
|
bdp++;
|
|
|
|
/* Move dirty_tx to be the next bd */
|
|
priv->dirty_tx = bdp;
|
|
|
|
/* We freed a buffer, so now we can restart transmission */
|
|
if (netif_queue_stopped(dev))
|
|
netif_wake_queue(dev);
|
|
} /* while ((bdp->status & TXBD_READY) == 0) */
|
|
|
|
dev->stats.tx_packets += howmany;
|
|
|
|
return howmany;
|
|
}
|
|
|
|
/* Interrupt Handler for Transmit complete */
|
|
static irqreturn_t gfar_transmit(int irq, void *dev_id)
|
|
{
|
|
struct net_device *dev = (struct net_device *) dev_id;
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
|
|
/* Clear IEVENT */
|
|
gfar_write(&priv->regs->ievent, IEVENT_TX_MASK);
|
|
|
|
/* Lock priv */
|
|
spin_lock(&priv->txlock);
|
|
|
|
gfar_clean_tx_ring(dev);
|
|
|
|
/* If we are coalescing the interrupts, reset the timer */
|
|
/* Otherwise, clear it */
|
|
if (likely(priv->txcoalescing)) {
|
|
gfar_write(&priv->regs->txic, 0);
|
|
gfar_write(&priv->regs->txic,
|
|
mk_ic_value(priv->txcount, priv->txtime));
|
|
}
|
|
|
|
spin_unlock(&priv->txlock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void gfar_new_rxbdp(struct net_device *dev, struct rxbd8 *bdp,
|
|
struct sk_buff *skb)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
u32 * status_len = (u32 *)bdp;
|
|
u16 flags;
|
|
|
|
bdp->bufPtr = dma_map_single(&dev->dev, skb->data,
|
|
priv->rx_buffer_size, DMA_FROM_DEVICE);
|
|
|
|
flags = RXBD_EMPTY | RXBD_INTERRUPT;
|
|
|
|
if (bdp == priv->rx_bd_base + priv->rx_ring_size - 1)
|
|
flags |= RXBD_WRAP;
|
|
|
|
eieio();
|
|
|
|
*status_len = (u32)flags << 16;
|
|
}
|
|
|
|
|
|
struct sk_buff * gfar_new_skb(struct net_device *dev)
|
|
{
|
|
unsigned int alignamount;
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
struct sk_buff *skb = NULL;
|
|
|
|
/* We have to allocate the skb, so keep trying till we succeed */
|
|
skb = netdev_alloc_skb(dev, priv->rx_buffer_size + RXBUF_ALIGNMENT);
|
|
|
|
if (!skb)
|
|
return NULL;
|
|
|
|
alignamount = RXBUF_ALIGNMENT -
|
|
(((unsigned long) skb->data) & (RXBUF_ALIGNMENT - 1));
|
|
|
|
/* We need the data buffer to be aligned properly. We will reserve
|
|
* as many bytes as needed to align the data properly
|
|
*/
|
|
skb_reserve(skb, alignamount);
|
|
|
|
return skb;
|
|
}
|
|
|
|
static inline void count_errors(unsigned short status, struct net_device *dev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
struct net_device_stats *stats = &dev->stats;
|
|
struct gfar_extra_stats *estats = &priv->extra_stats;
|
|
|
|
/* If the packet was truncated, none of the other errors
|
|
* matter */
|
|
if (status & RXBD_TRUNCATED) {
|
|
stats->rx_length_errors++;
|
|
|
|
estats->rx_trunc++;
|
|
|
|
return;
|
|
}
|
|
/* Count the errors, if there were any */
|
|
if (status & (RXBD_LARGE | RXBD_SHORT)) {
|
|
stats->rx_length_errors++;
|
|
|
|
if (status & RXBD_LARGE)
|
|
estats->rx_large++;
|
|
else
|
|
estats->rx_short++;
|
|
}
|
|
if (status & RXBD_NONOCTET) {
|
|
stats->rx_frame_errors++;
|
|
estats->rx_nonoctet++;
|
|
}
|
|
if (status & RXBD_CRCERR) {
|
|
estats->rx_crcerr++;
|
|
stats->rx_crc_errors++;
|
|
}
|
|
if (status & RXBD_OVERRUN) {
|
|
estats->rx_overrun++;
|
|
stats->rx_crc_errors++;
|
|
}
|
|
}
|
|
|
|
irqreturn_t gfar_receive(int irq, void *dev_id)
|
|
{
|
|
struct net_device *dev = (struct net_device *) dev_id;
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
u32 tempval;
|
|
|
|
/* support NAPI */
|
|
/* Clear IEVENT, so interrupts aren't called again
|
|
* because of the packets that have already arrived */
|
|
gfar_write(&priv->regs->ievent, IEVENT_RTX_MASK);
|
|
|
|
if (netif_rx_schedule_prep(dev, &priv->napi)) {
|
|
tempval = gfar_read(&priv->regs->imask);
|
|
tempval &= IMASK_RTX_DISABLED;
|
|
gfar_write(&priv->regs->imask, tempval);
|
|
|
|
__netif_rx_schedule(dev, &priv->napi);
|
|
} else {
|
|
if (netif_msg_rx_err(priv))
|
|
printk(KERN_DEBUG "%s: receive called twice (%x)[%x]\n",
|
|
dev->name, gfar_read(&priv->regs->ievent),
|
|
gfar_read(&priv->regs->imask));
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static inline void gfar_rx_checksum(struct sk_buff *skb, struct rxfcb *fcb)
|
|
{
|
|
/* If valid headers were found, and valid sums
|
|
* were verified, then we tell the kernel that no
|
|
* checksumming is necessary. Otherwise, it is */
|
|
if ((fcb->flags & RXFCB_CSUM_MASK) == (RXFCB_CIP | RXFCB_CTU))
|
|
skb->ip_summed = CHECKSUM_UNNECESSARY;
|
|
else
|
|
skb->ip_summed = CHECKSUM_NONE;
|
|
}
|
|
|
|
|
|
static inline struct rxfcb *gfar_get_fcb(struct sk_buff *skb)
|
|
{
|
|
struct rxfcb *fcb = (struct rxfcb *)skb->data;
|
|
|
|
/* Remove the FCB from the skb */
|
|
skb_pull(skb, GMAC_FCB_LEN);
|
|
|
|
return fcb;
|
|
}
|
|
|
|
/* gfar_process_frame() -- handle one incoming packet if skb
|
|
* isn't NULL. */
|
|
static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb,
|
|
int length)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
struct rxfcb *fcb = NULL;
|
|
|
|
if (NULL == skb) {
|
|
if (netif_msg_rx_err(priv))
|
|
printk(KERN_WARNING "%s: Missing skb!!.\n", dev->name);
|
|
dev->stats.rx_dropped++;
|
|
priv->extra_stats.rx_skbmissing++;
|
|
} else {
|
|
int ret;
|
|
|
|
/* Prep the skb for the packet */
|
|
skb_put(skb, length);
|
|
|
|
/* Grab the FCB if there is one */
|
|
if (gfar_uses_fcb(priv))
|
|
fcb = gfar_get_fcb(skb);
|
|
|
|
/* Remove the padded bytes, if there are any */
|
|
if (priv->padding)
|
|
skb_pull(skb, priv->padding);
|
|
|
|
if (priv->rx_csum_enable)
|
|
gfar_rx_checksum(skb, fcb);
|
|
|
|
/* Tell the skb what kind of packet this is */
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
|
|
/* Send the packet up the stack */
|
|
if (unlikely(priv->vlgrp && (fcb->flags & RXFCB_VLN))) {
|
|
ret = vlan_hwaccel_receive_skb(skb, priv->vlgrp,
|
|
fcb->vlctl);
|
|
} else
|
|
ret = netif_receive_skb(skb);
|
|
|
|
if (NET_RX_DROP == ret)
|
|
priv->extra_stats.kernel_dropped++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* gfar_clean_rx_ring() -- Processes each frame in the rx ring
|
|
* until the budget/quota has been reached. Returns the number
|
|
* of frames handled
|
|
*/
|
|
int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit)
|
|
{
|
|
struct rxbd8 *bdp;
|
|
struct sk_buff *skb;
|
|
u16 pkt_len;
|
|
int howmany = 0;
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
|
|
/* Get the first full descriptor */
|
|
bdp = priv->cur_rx;
|
|
|
|
while (!((bdp->status & RXBD_EMPTY) || (--rx_work_limit < 0))) {
|
|
struct sk_buff *newskb;
|
|
rmb();
|
|
|
|
/* Add another skb for the future */
|
|
newskb = gfar_new_skb(dev);
|
|
|
|
skb = priv->rx_skbuff[priv->skb_currx];
|
|
|
|
/* We drop the frame if we failed to allocate a new buffer */
|
|
if (unlikely(!newskb || !(bdp->status & RXBD_LAST) ||
|
|
bdp->status & RXBD_ERR)) {
|
|
count_errors(bdp->status, dev);
|
|
|
|
if (unlikely(!newskb))
|
|
newskb = skb;
|
|
|
|
if (skb) {
|
|
dma_unmap_single(&priv->dev->dev,
|
|
bdp->bufPtr,
|
|
priv->rx_buffer_size,
|
|
DMA_FROM_DEVICE);
|
|
|
|
dev_kfree_skb_any(skb);
|
|
}
|
|
} else {
|
|
/* Increment the number of packets */
|
|
dev->stats.rx_packets++;
|
|
howmany++;
|
|
|
|
/* Remove the FCS from the packet length */
|
|
pkt_len = bdp->length - 4;
|
|
|
|
gfar_process_frame(dev, skb, pkt_len);
|
|
|
|
dev->stats.rx_bytes += pkt_len;
|
|
}
|
|
|
|
dev->last_rx = jiffies;
|
|
|
|
priv->rx_skbuff[priv->skb_currx] = newskb;
|
|
|
|
/* Setup the new bdp */
|
|
gfar_new_rxbdp(dev, bdp, newskb);
|
|
|
|
/* Update to the next pointer */
|
|
if (bdp->status & RXBD_WRAP)
|
|
bdp = priv->rx_bd_base;
|
|
else
|
|
bdp++;
|
|
|
|
/* update to point at the next skb */
|
|
priv->skb_currx =
|
|
(priv->skb_currx + 1) &
|
|
RX_RING_MOD_MASK(priv->rx_ring_size);
|
|
}
|
|
|
|
/* Update the current rxbd pointer to be the next one */
|
|
priv->cur_rx = bdp;
|
|
|
|
return howmany;
|
|
}
|
|
|
|
static int gfar_poll(struct napi_struct *napi, int budget)
|
|
{
|
|
struct gfar_private *priv = container_of(napi, struct gfar_private, napi);
|
|
struct net_device *dev = priv->dev;
|
|
int howmany;
|
|
unsigned long flags;
|
|
|
|
/* If we fail to get the lock, don't bother with the TX BDs */
|
|
if (spin_trylock_irqsave(&priv->txlock, flags)) {
|
|
gfar_clean_tx_ring(dev);
|
|
spin_unlock_irqrestore(&priv->txlock, flags);
|
|
}
|
|
|
|
howmany = gfar_clean_rx_ring(dev, budget);
|
|
|
|
if (howmany < budget) {
|
|
netif_rx_complete(dev, napi);
|
|
|
|
/* Clear the halt bit in RSTAT */
|
|
gfar_write(&priv->regs->rstat, RSTAT_CLEAR_RHALT);
|
|
|
|
gfar_write(&priv->regs->imask, IMASK_DEFAULT);
|
|
|
|
/* If we are coalescing interrupts, update the timer */
|
|
/* Otherwise, clear it */
|
|
if (likely(priv->rxcoalescing)) {
|
|
gfar_write(&priv->regs->rxic, 0);
|
|
gfar_write(&priv->regs->rxic,
|
|
mk_ic_value(priv->rxcount, priv->rxtime));
|
|
}
|
|
}
|
|
|
|
return howmany;
|
|
}
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
/*
|
|
* Polling 'interrupt' - used by things like netconsole to send skbs
|
|
* without having to re-enable interrupts. It's not called while
|
|
* the interrupt routine is executing.
|
|
*/
|
|
static void gfar_netpoll(struct net_device *dev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
|
|
/* If the device has multiple interrupts, run tx/rx */
|
|
if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) {
|
|
disable_irq(priv->interruptTransmit);
|
|
disable_irq(priv->interruptReceive);
|
|
disable_irq(priv->interruptError);
|
|
gfar_interrupt(priv->interruptTransmit, dev);
|
|
enable_irq(priv->interruptError);
|
|
enable_irq(priv->interruptReceive);
|
|
enable_irq(priv->interruptTransmit);
|
|
} else {
|
|
disable_irq(priv->interruptTransmit);
|
|
gfar_interrupt(priv->interruptTransmit, dev);
|
|
enable_irq(priv->interruptTransmit);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/* The interrupt handler for devices with one interrupt */
|
|
static irqreturn_t gfar_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
|
|
/* Save ievent for future reference */
|
|
u32 events = gfar_read(&priv->regs->ievent);
|
|
|
|
/* Check for reception */
|
|
if (events & IEVENT_RX_MASK)
|
|
gfar_receive(irq, dev_id);
|
|
|
|
/* Check for transmit completion */
|
|
if (events & IEVENT_TX_MASK)
|
|
gfar_transmit(irq, dev_id);
|
|
|
|
/* Check for errors */
|
|
if (events & IEVENT_ERR_MASK)
|
|
gfar_error(irq, dev_id);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* Called every time the controller might need to be made
|
|
* aware of new link state. The PHY code conveys this
|
|
* information through variables in the phydev structure, and this
|
|
* function converts those variables into the appropriate
|
|
* register values, and can bring down the device if needed.
|
|
*/
|
|
static void adjust_link(struct net_device *dev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
struct gfar __iomem *regs = priv->regs;
|
|
unsigned long flags;
|
|
struct phy_device *phydev = priv->phydev;
|
|
int new_state = 0;
|
|
|
|
spin_lock_irqsave(&priv->txlock, flags);
|
|
if (phydev->link) {
|
|
u32 tempval = gfar_read(®s->maccfg2);
|
|
u32 ecntrl = gfar_read(®s->ecntrl);
|
|
|
|
/* Now we make sure that we can be in full duplex mode.
|
|
* If not, we operate in half-duplex mode. */
|
|
if (phydev->duplex != priv->oldduplex) {
|
|
new_state = 1;
|
|
if (!(phydev->duplex))
|
|
tempval &= ~(MACCFG2_FULL_DUPLEX);
|
|
else
|
|
tempval |= MACCFG2_FULL_DUPLEX;
|
|
|
|
priv->oldduplex = phydev->duplex;
|
|
}
|
|
|
|
if (phydev->speed != priv->oldspeed) {
|
|
new_state = 1;
|
|
switch (phydev->speed) {
|
|
case 1000:
|
|
tempval =
|
|
((tempval & ~(MACCFG2_IF)) | MACCFG2_GMII);
|
|
break;
|
|
case 100:
|
|
case 10:
|
|
tempval =
|
|
((tempval & ~(MACCFG2_IF)) | MACCFG2_MII);
|
|
|
|
/* Reduced mode distinguishes
|
|
* between 10 and 100 */
|
|
if (phydev->speed == SPEED_100)
|
|
ecntrl |= ECNTRL_R100;
|
|
else
|
|
ecntrl &= ~(ECNTRL_R100);
|
|
break;
|
|
default:
|
|
if (netif_msg_link(priv))
|
|
printk(KERN_WARNING
|
|
"%s: Ack! Speed (%d) is not 10/100/1000!\n",
|
|
dev->name, phydev->speed);
|
|
break;
|
|
}
|
|
|
|
priv->oldspeed = phydev->speed;
|
|
}
|
|
|
|
gfar_write(®s->maccfg2, tempval);
|
|
gfar_write(®s->ecntrl, ecntrl);
|
|
|
|
if (!priv->oldlink) {
|
|
new_state = 1;
|
|
priv->oldlink = 1;
|
|
}
|
|
} else if (priv->oldlink) {
|
|
new_state = 1;
|
|
priv->oldlink = 0;
|
|
priv->oldspeed = 0;
|
|
priv->oldduplex = -1;
|
|
}
|
|
|
|
if (new_state && netif_msg_link(priv))
|
|
phy_print_status(phydev);
|
|
|
|
spin_unlock_irqrestore(&priv->txlock, flags);
|
|
}
|
|
|
|
/* Update the hash table based on the current list of multicast
|
|
* addresses we subscribe to. Also, change the promiscuity of
|
|
* the device based on the flags (this function is called
|
|
* whenever dev->flags is changed */
|
|
static void gfar_set_multi(struct net_device *dev)
|
|
{
|
|
struct dev_mc_list *mc_ptr;
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
struct gfar __iomem *regs = priv->regs;
|
|
u32 tempval;
|
|
|
|
if(dev->flags & IFF_PROMISC) {
|
|
/* Set RCTRL to PROM */
|
|
tempval = gfar_read(®s->rctrl);
|
|
tempval |= RCTRL_PROM;
|
|
gfar_write(®s->rctrl, tempval);
|
|
} else {
|
|
/* Set RCTRL to not PROM */
|
|
tempval = gfar_read(®s->rctrl);
|
|
tempval &= ~(RCTRL_PROM);
|
|
gfar_write(®s->rctrl, tempval);
|
|
}
|
|
|
|
if(dev->flags & IFF_ALLMULTI) {
|
|
/* Set the hash to rx all multicast frames */
|
|
gfar_write(®s->igaddr0, 0xffffffff);
|
|
gfar_write(®s->igaddr1, 0xffffffff);
|
|
gfar_write(®s->igaddr2, 0xffffffff);
|
|
gfar_write(®s->igaddr3, 0xffffffff);
|
|
gfar_write(®s->igaddr4, 0xffffffff);
|
|
gfar_write(®s->igaddr5, 0xffffffff);
|
|
gfar_write(®s->igaddr6, 0xffffffff);
|
|
gfar_write(®s->igaddr7, 0xffffffff);
|
|
gfar_write(®s->gaddr0, 0xffffffff);
|
|
gfar_write(®s->gaddr1, 0xffffffff);
|
|
gfar_write(®s->gaddr2, 0xffffffff);
|
|
gfar_write(®s->gaddr3, 0xffffffff);
|
|
gfar_write(®s->gaddr4, 0xffffffff);
|
|
gfar_write(®s->gaddr5, 0xffffffff);
|
|
gfar_write(®s->gaddr6, 0xffffffff);
|
|
gfar_write(®s->gaddr7, 0xffffffff);
|
|
} else {
|
|
int em_num;
|
|
int idx;
|
|
|
|
/* zero out the hash */
|
|
gfar_write(®s->igaddr0, 0x0);
|
|
gfar_write(®s->igaddr1, 0x0);
|
|
gfar_write(®s->igaddr2, 0x0);
|
|
gfar_write(®s->igaddr3, 0x0);
|
|
gfar_write(®s->igaddr4, 0x0);
|
|
gfar_write(®s->igaddr5, 0x0);
|
|
gfar_write(®s->igaddr6, 0x0);
|
|
gfar_write(®s->igaddr7, 0x0);
|
|
gfar_write(®s->gaddr0, 0x0);
|
|
gfar_write(®s->gaddr1, 0x0);
|
|
gfar_write(®s->gaddr2, 0x0);
|
|
gfar_write(®s->gaddr3, 0x0);
|
|
gfar_write(®s->gaddr4, 0x0);
|
|
gfar_write(®s->gaddr5, 0x0);
|
|
gfar_write(®s->gaddr6, 0x0);
|
|
gfar_write(®s->gaddr7, 0x0);
|
|
|
|
/* If we have extended hash tables, we need to
|
|
* clear the exact match registers to prepare for
|
|
* setting them */
|
|
if (priv->extended_hash) {
|
|
em_num = GFAR_EM_NUM + 1;
|
|
gfar_clear_exact_match(dev);
|
|
idx = 1;
|
|
} else {
|
|
idx = 0;
|
|
em_num = 0;
|
|
}
|
|
|
|
if(dev->mc_count == 0)
|
|
return;
|
|
|
|
/* Parse the list, and set the appropriate bits */
|
|
for(mc_ptr = dev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) {
|
|
if (idx < em_num) {
|
|
gfar_set_mac_for_addr(dev, idx,
|
|
mc_ptr->dmi_addr);
|
|
idx++;
|
|
} else
|
|
gfar_set_hash_for_addr(dev, mc_ptr->dmi_addr);
|
|
}
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
/* Clears each of the exact match registers to zero, so they
|
|
* don't interfere with normal reception */
|
|
static void gfar_clear_exact_match(struct net_device *dev)
|
|
{
|
|
int idx;
|
|
u8 zero_arr[MAC_ADDR_LEN] = {0,0,0,0,0,0};
|
|
|
|
for(idx = 1;idx < GFAR_EM_NUM + 1;idx++)
|
|
gfar_set_mac_for_addr(dev, idx, (u8 *)zero_arr);
|
|
}
|
|
|
|
/* Set the appropriate hash bit for the given addr */
|
|
/* The algorithm works like so:
|
|
* 1) Take the Destination Address (ie the multicast address), and
|
|
* do a CRC on it (little endian), and reverse the bits of the
|
|
* result.
|
|
* 2) Use the 8 most significant bits as a hash into a 256-entry
|
|
* table. The table is controlled through 8 32-bit registers:
|
|
* gaddr0-7. gaddr0's MSB is entry 0, and gaddr7's LSB is
|
|
* gaddr7. This means that the 3 most significant bits in the
|
|
* hash index which gaddr register to use, and the 5 other bits
|
|
* indicate which bit (assuming an IBM numbering scheme, which
|
|
* for PowerPC (tm) is usually the case) in the register holds
|
|
* the entry. */
|
|
static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr)
|
|
{
|
|
u32 tempval;
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
u32 result = ether_crc(MAC_ADDR_LEN, addr);
|
|
int width = priv->hash_width;
|
|
u8 whichbit = (result >> (32 - width)) & 0x1f;
|
|
u8 whichreg = result >> (32 - width + 5);
|
|
u32 value = (1 << (31-whichbit));
|
|
|
|
tempval = gfar_read(priv->hash_regs[whichreg]);
|
|
tempval |= value;
|
|
gfar_write(priv->hash_regs[whichreg], tempval);
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
/* There are multiple MAC Address register pairs on some controllers
|
|
* This function sets the numth pair to a given address
|
|
*/
|
|
static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
int idx;
|
|
char tmpbuf[MAC_ADDR_LEN];
|
|
u32 tempval;
|
|
u32 __iomem *macptr = &priv->regs->macstnaddr1;
|
|
|
|
macptr += num*2;
|
|
|
|
/* Now copy it into the mac registers backwards, cuz */
|
|
/* little endian is silly */
|
|
for (idx = 0; idx < MAC_ADDR_LEN; idx++)
|
|
tmpbuf[MAC_ADDR_LEN - 1 - idx] = addr[idx];
|
|
|
|
gfar_write(macptr, *((u32 *) (tmpbuf)));
|
|
|
|
tempval = *((u32 *) (tmpbuf + 4));
|
|
|
|
gfar_write(macptr+1, tempval);
|
|
}
|
|
|
|
/* GFAR error interrupt handler */
|
|
static irqreturn_t gfar_error(int irq, void *dev_id)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
|
|
/* Save ievent for future reference */
|
|
u32 events = gfar_read(&priv->regs->ievent);
|
|
|
|
/* Clear IEVENT */
|
|
gfar_write(&priv->regs->ievent, events & IEVENT_ERR_MASK);
|
|
|
|
/* Magic Packet is not an error. */
|
|
if ((priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET) &&
|
|
(events & IEVENT_MAG))
|
|
events &= ~IEVENT_MAG;
|
|
|
|
/* Hmm... */
|
|
if (netif_msg_rx_err(priv) || netif_msg_tx_err(priv))
|
|
printk(KERN_DEBUG "%s: error interrupt (ievent=0x%08x imask=0x%08x)\n",
|
|
dev->name, events, gfar_read(&priv->regs->imask));
|
|
|
|
/* Update the error counters */
|
|
if (events & IEVENT_TXE) {
|
|
dev->stats.tx_errors++;
|
|
|
|
if (events & IEVENT_LC)
|
|
dev->stats.tx_window_errors++;
|
|
if (events & IEVENT_CRL)
|
|
dev->stats.tx_aborted_errors++;
|
|
if (events & IEVENT_XFUN) {
|
|
if (netif_msg_tx_err(priv))
|
|
printk(KERN_DEBUG "%s: TX FIFO underrun, "
|
|
"packet dropped.\n", dev->name);
|
|
dev->stats.tx_dropped++;
|
|
priv->extra_stats.tx_underrun++;
|
|
|
|
/* Reactivate the Tx Queues */
|
|
gfar_write(&priv->regs->tstat, TSTAT_CLEAR_THALT);
|
|
}
|
|
if (netif_msg_tx_err(priv))
|
|
printk(KERN_DEBUG "%s: Transmit Error\n", dev->name);
|
|
}
|
|
if (events & IEVENT_BSY) {
|
|
dev->stats.rx_errors++;
|
|
priv->extra_stats.rx_bsy++;
|
|
|
|
gfar_receive(irq, dev_id);
|
|
|
|
if (netif_msg_rx_err(priv))
|
|
printk(KERN_DEBUG "%s: busy error (rstat: %x)\n",
|
|
dev->name, gfar_read(&priv->regs->rstat));
|
|
}
|
|
if (events & IEVENT_BABR) {
|
|
dev->stats.rx_errors++;
|
|
priv->extra_stats.rx_babr++;
|
|
|
|
if (netif_msg_rx_err(priv))
|
|
printk(KERN_DEBUG "%s: babbling RX error\n", dev->name);
|
|
}
|
|
if (events & IEVENT_EBERR) {
|
|
priv->extra_stats.eberr++;
|
|
if (netif_msg_rx_err(priv))
|
|
printk(KERN_DEBUG "%s: bus error\n", dev->name);
|
|
}
|
|
if ((events & IEVENT_RXC) && netif_msg_rx_status(priv))
|
|
printk(KERN_DEBUG "%s: control frame\n", dev->name);
|
|
|
|
if (events & IEVENT_BABT) {
|
|
priv->extra_stats.tx_babt++;
|
|
if (netif_msg_tx_err(priv))
|
|
printk(KERN_DEBUG "%s: babbling TX error\n", dev->name);
|
|
}
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* work with hotplug and coldplug */
|
|
MODULE_ALIAS("platform:fsl-gianfar");
|
|
|
|
/* Structure for a device driver */
|
|
static struct platform_driver gfar_driver = {
|
|
.probe = gfar_probe,
|
|
.remove = gfar_remove,
|
|
.suspend = gfar_suspend,
|
|
.resume = gfar_resume,
|
|
.driver = {
|
|
.name = "fsl-gianfar",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
static int __init gfar_init(void)
|
|
{
|
|
int err = gfar_mdio_init();
|
|
|
|
if (err)
|
|
return err;
|
|
|
|
err = platform_driver_register(&gfar_driver);
|
|
|
|
if (err)
|
|
gfar_mdio_exit();
|
|
|
|
return err;
|
|
}
|
|
|
|
static void __exit gfar_exit(void)
|
|
{
|
|
platform_driver_unregister(&gfar_driver);
|
|
gfar_mdio_exit();
|
|
}
|
|
|
|
module_init(gfar_init);
|
|
module_exit(gfar_exit);
|
|
|