Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-23 12:42:02 +00:00
Code Issues Packages Projects Releases Wiki Activity
43d1474827
linux/drivers/hwmon/tc654.c
Stephen Kitt 6748703856 hwmon: use simple i2c probe function 
Many hwmon drivers don't use the id information provided by the old
i2c probe function, and the remainder can easily be adapted to the new
form ("probe_new") by calling i2c_match_id explicitly.

This avoids scanning the identifier tables during probes.

Drivers which didn't use the id are converted as-is; drivers which did
are modified as follows:

* if the information in i2c_client is sufficient, that's used instead
  (client->name);
* anything else is handled by calling i2c_match_id() with the same
  level of error-handling (if any) as before.

A few drivers aren't included in this patch because they have a
different set of maintainers. They will be covered by other patches.

Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20200813160222.1503401-1-steve@sk2.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23 09:42:39 -07:00

499 lines
13 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* tc654.c - Linux kernel modules for fan speed controller
*
* Copyright (C) 2016 Allied Telesis Labs NZ
*/
#include <linux/bitops.h>
#include <linux/err.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/jiffies.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/util_macros.h>
enum tc654_regs {
TC654_REG_RPM1 = 0x00, /* RPM Output 1 */
TC654_REG_RPM2 = 0x01, /* RPM Output 2 */
TC654_REG_FAN_FAULT1 = 0x02, /* Fan Fault 1 Threshold */
TC654_REG_FAN_FAULT2 = 0x03, /* Fan Fault 2 Threshold */
TC654_REG_CONFIG = 0x04, /* Configuration */
TC654_REG_STATUS = 0x05, /* Status */
TC654_REG_DUTY_CYCLE = 0x06, /* Fan Speed Duty Cycle */
TC654_REG_MFR_ID = 0x07, /* Manufacturer Identification */
TC654_REG_VER_ID = 0x08, /* Version Identification */
};
/* Macros to easily index the registers */
#define TC654_REG_RPM(idx) (TC654_REG_RPM1 + (idx))
#define TC654_REG_FAN_FAULT(idx) (TC654_REG_FAN_FAULT1 + (idx))
/* Config register bits */
#define TC654_REG_CONFIG_RES BIT(6) /* Resolution Selection */
#define TC654_REG_CONFIG_DUTYC BIT(5) /* Duty Cycle Control */
#define TC654_REG_CONFIG_SDM BIT(0) /* Shutdown Mode */
/* Status register bits */
#define TC654_REG_STATUS_F2F BIT(1) /* Fan 2 Fault */
#define TC654_REG_STATUS_F1F BIT(0) /* Fan 1 Fault */
/* RPM resolution for RPM Output registers */
#define TC654_HIGH_RPM_RESOLUTION 25 /* 25 RPM resolution */
#define TC654_LOW_RPM_RESOLUTION 50 /* 50 RPM resolution */
/* Convert to the fan fault RPM threshold from register value */
#define TC654_FAN_FAULT_FROM_REG(val) ((val) * 50) /* 50 RPM resolution */
/* Convert to register value from the fan fault RPM threshold */
#define TC654_FAN_FAULT_TO_REG(val) (((val) / 50) & 0xff)
/* Register data is read (and cached) at most once per second. */
#define TC654_UPDATE_INTERVAL HZ
struct tc654_data {
struct i2c_client *client;
/* update mutex */
struct mutex update_lock;
/* tc654 register cache */
bool valid;
unsigned long last_updated; /* in jiffies */
u8 rpm_output[2]; /* The fan RPM data for fans 1 and 2 is then
* written to registers RPM1 and RPM2
*/
u8 fan_fault[2]; /* The Fan Fault Threshold Registers are used to
* set the fan fault threshold levels for fan 1
* and fan 2
*/
u8 config; /* The Configuration Register is an 8-bit read/
* writable multi-function control register
* 7: Fan Fault Clear
* 1 = Clear Fan Fault
* 0 = Normal Operation (default)
* 6: Resolution Selection for RPM Output Registers
* RPM Output Registers (RPM1 and RPM2) will be
* set for
* 1 = 25 RPM (9-bit) resolution
* 0 = 50 RPM (8-bit) resolution (default)
* 5: Duty Cycle Control Method
* The V OUT duty cycle will be controlled via
* 1 = the SMBus interface.
* 0 = via the V IN analog input pin. (default)
* 4,3: Fan 2 Pulses Per Rotation
* 00 = 1
* 01 = 2 (default)
* 10 = 4
* 11 = 8
* 2,1: Fan 1 Pulses Per Rotation
* 00 = 1
* 01 = 2 (default)
* 10 = 4
* 11 = 8
* 0: Shutdown Mode
* 1 = Shutdown mode.
* 0 = Normal operation. (default)
*/
u8 status; /* The Status register provides all the information
* about what is going on within the TC654/TC655
* devices.
* 7,6: Unimplemented, Read as '0'
* 5: Over-Temperature Fault Condition
* 1 = Over-Temperature condition has occurred
* 0 = Normal operation. V IN is less than 2.6V
* 4: RPM2 Counter Overflow
* 1 = Fault condition
* 0 = Normal operation
* 3: RPM1 Counter Overflow
* 1 = Fault condition
* 0 = Normal operation
* 2: V IN Input Status
* 1 = V IN is open
* 0 = Normal operation. voltage present at V IN
* 1: Fan 2 Fault
* 1 = Fault condition
* 0 = Normal operation
* 0: Fan 1 Fault
* 1 = Fault condition
* 0 = Normal operation
*/
u8 duty_cycle; /* The DUTY_CYCLE register is a 4-bit read/
* writable register used to control the duty
* cycle of the V OUT output.
*/
};
/* helper to grab and cache data, at most one time per second */
static struct tc654_data *tc654_update_client(struct device *dev)
{
struct tc654_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
int ret = 0;
mutex_lock(&data->update_lock);
if (time_before(jiffies, data->last_updated + TC654_UPDATE_INTERVAL) &&
likely(data->valid))
goto out;
ret = i2c_smbus_read_byte_data(client, TC654_REG_RPM(0));
if (ret < 0)
goto out;
data->rpm_output[0] = ret;
ret = i2c_smbus_read_byte_data(client, TC654_REG_RPM(1));
if (ret < 0)
goto out;
data->rpm_output[1] = ret;
ret = i2c_smbus_read_byte_data(client, TC654_REG_FAN_FAULT(0));
if (ret < 0)
goto out;
data->fan_fault[0] = ret;
ret = i2c_smbus_read_byte_data(client, TC654_REG_FAN_FAULT(1));
if (ret < 0)
goto out;
data->fan_fault[1] = ret;
ret = i2c_smbus_read_byte_data(client, TC654_REG_CONFIG);
if (ret < 0)
goto out;
data->config = ret;
ret = i2c_smbus_read_byte_data(client, TC654_REG_STATUS);
if (ret < 0)
goto out;
data->status = ret;
ret = i2c_smbus_read_byte_data(client, TC654_REG_DUTY_CYCLE);
if (ret < 0)
goto out;
data->duty_cycle = ret & 0x0f;
data->last_updated = jiffies;
data->valid = true;
out:
mutex_unlock(&data->update_lock);
if (ret < 0) /* upon error, encode it in return value */
data = ERR_PTR(ret);
return data;
}
/*
* sysfs attributes
*/
static ssize_t fan_show(struct device *dev, struct device_attribute *da,
char *buf)
{
int nr = to_sensor_dev_attr(da)->index;
struct tc654_data *data = tc654_update_client(dev);
int val;
if (IS_ERR(data))
return PTR_ERR(data);
if (data->config & TC654_REG_CONFIG_RES)
val = data->rpm_output[nr] * TC654_HIGH_RPM_RESOLUTION;
else
val = data->rpm_output[nr] * TC654_LOW_RPM_RESOLUTION;
return sprintf(buf, "%d\n", val);
}
static ssize_t fan_min_show(struct device *dev, struct device_attribute *da,
char *buf)
{
int nr = to_sensor_dev_attr(da)->index;
struct tc654_data *data = tc654_update_client(dev);
if (IS_ERR(data))
return PTR_ERR(data);
return sprintf(buf, "%d\n",
TC654_FAN_FAULT_FROM_REG(data->fan_fault[nr]));
}
static ssize_t fan_min_store(struct device *dev, struct device_attribute *da,
const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(da)->index;
struct tc654_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
unsigned long val;
int ret;
if (kstrtoul(buf, 10, &val))
return -EINVAL;
val = clamp_val(val, 0, 12750);
mutex_lock(&data->update_lock);
data->fan_fault[nr] = TC654_FAN_FAULT_TO_REG(val);
ret = i2c_smbus_write_byte_data(client, TC654_REG_FAN_FAULT(nr),
data->fan_fault[nr]);
mutex_unlock(&data->update_lock);
return ret < 0 ? ret : count;
}
static ssize_t fan_alarm_show(struct device *dev, struct device_attribute *da,
char *buf)
{
int nr = to_sensor_dev_attr(da)->index;
struct tc654_data *data = tc654_update_client(dev);
int val;
if (IS_ERR(data))
return PTR_ERR(data);
if (nr == 0)
val = !!(data->status & TC654_REG_STATUS_F1F);
else
val = !!(data->status & TC654_REG_STATUS_F2F);
return sprintf(buf, "%d\n", val);
}
static const u8 TC654_FAN_PULSE_SHIFT[] = { 1, 3 };
static ssize_t fan_pulses_show(struct device *dev,
struct device_attribute *da, char *buf)
{
int nr = to_sensor_dev_attr(da)->index;
struct tc654_data *data = tc654_update_client(dev);
u8 val;
if (IS_ERR(data))
return PTR_ERR(data);
val = BIT((data->config >> TC654_FAN_PULSE_SHIFT[nr]) & 0x03);
return sprintf(buf, "%d\n", val);
}
static ssize_t fan_pulses_store(struct device *dev,
struct device_attribute *da, const char *buf,
size_t count)
{
int nr = to_sensor_dev_attr(da)->index;
struct tc654_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
u8 config;
unsigned long val;
int ret;
if (kstrtoul(buf, 10, &val))
return -EINVAL;
switch (val) {
case 1:
config = 0;
break;
case 2:
config = 1;
break;
case 4:
config = 2;
break;
case 8:
config = 3;
break;
default:
return -EINVAL;
}
mutex_lock(&data->update_lock);
data->config &= ~(0x03 << TC654_FAN_PULSE_SHIFT[nr]);
data->config |= (config << TC654_FAN_PULSE_SHIFT[nr]);
ret = i2c_smbus_write_byte_data(client, TC654_REG_CONFIG, data->config);
mutex_unlock(&data->update_lock);
return ret < 0 ? ret : count;
}
static ssize_t pwm_mode_show(struct device *dev, struct device_attribute *da,
char *buf)
{
struct tc654_data *data = tc654_update_client(dev);
if (IS_ERR(data))
return PTR_ERR(data);
return sprintf(buf, "%d\n", !!(data->config & TC654_REG_CONFIG_DUTYC));
}
static ssize_t pwm_mode_store(struct device *dev, struct device_attribute *da,
const char *buf, size_t count)
{
struct tc654_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
unsigned long val;
int ret;
if (kstrtoul(buf, 10, &val))
return -EINVAL;
if (val != 0 && val != 1)
return -EINVAL;
mutex_lock(&data->update_lock);
if (val)
data->config |= TC654_REG_CONFIG_DUTYC;
else
data->config &= ~TC654_REG_CONFIG_DUTYC;
ret = i2c_smbus_write_byte_data(client, TC654_REG_CONFIG, data->config);
mutex_unlock(&data->update_lock);
return ret < 0 ? ret : count;
}
static const int tc654_pwm_map[16] = { 77, 88, 102, 112, 124, 136, 148, 160,
172, 184, 196, 207, 219, 231, 243, 255};
static ssize_t pwm_show(struct device *dev, struct device_attribute *da,
char *buf)
{
struct tc654_data *data = tc654_update_client(dev);
int pwm;
if (IS_ERR(data))
return PTR_ERR(data);
if (data->config & TC654_REG_CONFIG_SDM)
pwm = 0;
else
pwm = tc654_pwm_map[data->duty_cycle];
return sprintf(buf, "%d\n", pwm);
}
static ssize_t pwm_store(struct device *dev, struct device_attribute *da,
const char *buf, size_t count)
{
struct tc654_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
unsigned long val;
int ret;
if (kstrtoul(buf, 10, &val))
return -EINVAL;
if (val > 255)
return -EINVAL;
mutex_lock(&data->update_lock);
if (val == 0)
data->config |= TC654_REG_CONFIG_SDM;
else
data->config &= ~TC654_REG_CONFIG_SDM;
data->duty_cycle = find_closest(val, tc654_pwm_map,
ARRAY_SIZE(tc654_pwm_map));
ret = i2c_smbus_write_byte_data(client, TC654_REG_CONFIG, data->config);
if (ret < 0)
goto out;
ret = i2c_smbus_write_byte_data(client, TC654_REG_DUTY_CYCLE,
data->duty_cycle);
out:
mutex_unlock(&data->update_lock);
return ret < 0 ? ret : count;
}
static SENSOR_DEVICE_ATTR_RO(fan1_input, fan, 0);
static SENSOR_DEVICE_ATTR_RO(fan2_input, fan, 1);
static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0);
static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1);
static SENSOR_DEVICE_ATTR_RO(fan1_alarm, fan_alarm, 0);
static SENSOR_DEVICE_ATTR_RO(fan2_alarm, fan_alarm, 1);
static SENSOR_DEVICE_ATTR_RW(fan1_pulses, fan_pulses, 0);
static SENSOR_DEVICE_ATTR_RW(fan2_pulses, fan_pulses, 1);
static SENSOR_DEVICE_ATTR_RW(pwm1_mode, pwm_mode, 0);
static SENSOR_DEVICE_ATTR_RW(pwm1, pwm, 0);
/* Driver data */
static struct attribute *tc654_attrs[] = {
&sensor_dev_attr_fan1_input.dev_attr.attr,
&sensor_dev_attr_fan2_input.dev_attr.attr,
&sensor_dev_attr_fan1_min.dev_attr.attr,
&sensor_dev_attr_fan2_min.dev_attr.attr,
&sensor_dev_attr_fan1_alarm.dev_attr.attr,
&sensor_dev_attr_fan2_alarm.dev_attr.attr,
&sensor_dev_attr_fan1_pulses.dev_attr.attr,
&sensor_dev_attr_fan2_pulses.dev_attr.attr,
&sensor_dev_attr_pwm1_mode.dev_attr.attr,
&sensor_dev_attr_pwm1.dev_attr.attr,
NULL
};
ATTRIBUTE_GROUPS(tc654);
/*
* device probe and removal
*/
static int tc654_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
struct tc654_data *data;
struct device *hwmon_dev;
int ret;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
data = devm_kzalloc(dev, sizeof(struct tc654_data), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->client = client;
mutex_init(&data->update_lock);
ret = i2c_smbus_read_byte_data(client, TC654_REG_CONFIG);
if (ret < 0)
return ret;
data->config = ret;
hwmon_dev =
devm_hwmon_device_register_with_groups(dev, client->name, data,
tc654_groups);
return PTR_ERR_OR_ZERO(hwmon_dev);
}
static const struct i2c_device_id tc654_id[] = {
{"tc654", 0},
{"tc655", 0},
{}
};
MODULE_DEVICE_TABLE(i2c, tc654_id);
static struct i2c_driver tc654_driver = {
.driver = {
.name = "tc654",
},
.probe_new = tc654_probe,
.id_table = tc654_id,
};
module_i2c_driver(tc654_driver);
MODULE_AUTHOR("Allied Telesis Labs");
MODULE_DESCRIPTION("Microchip TC654/TC655 driver");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink