mirror of
https://github.com/torvalds/linux.git
synced 2024-12-28 22:02:28 +00:00
5cdceab3d5
Fix regression in bbc i2c temperature and fan control on some Sun systems that causes the driver to refuse to load due to the bbc_i2c_bussel resource not being present on the (second) i2c bus where the temperature sensors and fan control are located. (The check for the number of resources was removed when the driver was ported to a pure OF driver in mid 2008.) Signed-off-by: Christopher Alexander Tobias Schulze <cat.schulze@alice-dsl.net> Signed-off-by: David S. Miller <davem@davemloft.net>
426 lines
9.5 KiB
C
426 lines
9.5 KiB
C
/* bbc_i2c.c: I2C low-level driver for BBC device on UltraSPARC-III
|
|
* platforms.
|
|
*
|
|
* Copyright (C) 2001, 2008 David S. Miller (davem@davemloft.net)
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <asm/bbc.h>
|
|
#include <asm/io.h>
|
|
|
|
#include "bbc_i2c.h"
|
|
|
|
/* Convert this driver to use i2c bus layer someday... */
|
|
#define I2C_PCF_PIN 0x80
|
|
#define I2C_PCF_ESO 0x40
|
|
#define I2C_PCF_ES1 0x20
|
|
#define I2C_PCF_ES2 0x10
|
|
#define I2C_PCF_ENI 0x08
|
|
#define I2C_PCF_STA 0x04
|
|
#define I2C_PCF_STO 0x02
|
|
#define I2C_PCF_ACK 0x01
|
|
|
|
#define I2C_PCF_START (I2C_PCF_PIN | I2C_PCF_ESO | I2C_PCF_ENI | I2C_PCF_STA | I2C_PCF_ACK)
|
|
#define I2C_PCF_STOP (I2C_PCF_PIN | I2C_PCF_ESO | I2C_PCF_STO | I2C_PCF_ACK)
|
|
#define I2C_PCF_REPSTART ( I2C_PCF_ESO | I2C_PCF_STA | I2C_PCF_ACK)
|
|
#define I2C_PCF_IDLE (I2C_PCF_PIN | I2C_PCF_ESO | I2C_PCF_ACK)
|
|
|
|
#define I2C_PCF_INI 0x40 /* 1 if not initialized */
|
|
#define I2C_PCF_STS 0x20
|
|
#define I2C_PCF_BER 0x10
|
|
#define I2C_PCF_AD0 0x08
|
|
#define I2C_PCF_LRB 0x08
|
|
#define I2C_PCF_AAS 0x04
|
|
#define I2C_PCF_LAB 0x02
|
|
#define I2C_PCF_BB 0x01
|
|
|
|
/* The BBC devices have two I2C controllers. The first I2C controller
|
|
* connects mainly to configuration proms (NVRAM, cpu configuration,
|
|
* dimm types, etc.). Whereas the second I2C controller connects to
|
|
* environmental control devices such as fans and temperature sensors.
|
|
* The second controller also connects to the smartcard reader, if present.
|
|
*/
|
|
|
|
static void set_device_claimage(struct bbc_i2c_bus *bp, struct platform_device *op, int val)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < NUM_CHILDREN; i++) {
|
|
if (bp->devs[i].device == op) {
|
|
bp->devs[i].client_claimed = val;
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
#define claim_device(BP,ECHILD) set_device_claimage(BP,ECHILD,1)
|
|
#define release_device(BP,ECHILD) set_device_claimage(BP,ECHILD,0)
|
|
|
|
struct platform_device *bbc_i2c_getdev(struct bbc_i2c_bus *bp, int index)
|
|
{
|
|
struct platform_device *op = NULL;
|
|
int curidx = 0, i;
|
|
|
|
for (i = 0; i < NUM_CHILDREN; i++) {
|
|
if (!(op = bp->devs[i].device))
|
|
break;
|
|
if (curidx == index)
|
|
goto out;
|
|
op = NULL;
|
|
curidx++;
|
|
}
|
|
|
|
out:
|
|
if (curidx == index)
|
|
return op;
|
|
return NULL;
|
|
}
|
|
|
|
struct bbc_i2c_client *bbc_i2c_attach(struct bbc_i2c_bus *bp, struct platform_device *op)
|
|
{
|
|
struct bbc_i2c_client *client;
|
|
const u32 *reg;
|
|
|
|
client = kzalloc(sizeof(*client), GFP_KERNEL);
|
|
if (!client)
|
|
return NULL;
|
|
client->bp = bp;
|
|
client->op = op;
|
|
|
|
reg = of_get_property(op->dev.of_node, "reg", NULL);
|
|
if (!reg) {
|
|
kfree(client);
|
|
return NULL;
|
|
}
|
|
|
|
client->bus = reg[0];
|
|
client->address = reg[1];
|
|
|
|
claim_device(bp, op);
|
|
|
|
return client;
|
|
}
|
|
|
|
void bbc_i2c_detach(struct bbc_i2c_client *client)
|
|
{
|
|
struct bbc_i2c_bus *bp = client->bp;
|
|
struct platform_device *op = client->op;
|
|
|
|
release_device(bp, op);
|
|
kfree(client);
|
|
}
|
|
|
|
static int wait_for_pin(struct bbc_i2c_bus *bp, u8 *status)
|
|
{
|
|
DECLARE_WAITQUEUE(wait, current);
|
|
int limit = 32;
|
|
int ret = 1;
|
|
|
|
bp->waiting = 1;
|
|
add_wait_queue(&bp->wq, &wait);
|
|
while (limit-- > 0) {
|
|
long val;
|
|
|
|
val = wait_event_interruptible_timeout(
|
|
bp->wq,
|
|
(((*status = readb(bp->i2c_control_regs + 0))
|
|
& I2C_PCF_PIN) == 0),
|
|
msecs_to_jiffies(250));
|
|
if (val > 0) {
|
|
ret = 0;
|
|
break;
|
|
}
|
|
}
|
|
remove_wait_queue(&bp->wq, &wait);
|
|
bp->waiting = 0;
|
|
|
|
return ret;
|
|
}
|
|
|
|
int bbc_i2c_writeb(struct bbc_i2c_client *client, unsigned char val, int off)
|
|
{
|
|
struct bbc_i2c_bus *bp = client->bp;
|
|
int address = client->address;
|
|
u8 status;
|
|
int ret = -1;
|
|
|
|
if (bp->i2c_bussel_reg != NULL)
|
|
writeb(client->bus, bp->i2c_bussel_reg);
|
|
|
|
writeb(address, bp->i2c_control_regs + 0x1);
|
|
writeb(I2C_PCF_START, bp->i2c_control_regs + 0x0);
|
|
if (wait_for_pin(bp, &status))
|
|
goto out;
|
|
|
|
writeb(off, bp->i2c_control_regs + 0x1);
|
|
if (wait_for_pin(bp, &status) ||
|
|
(status & I2C_PCF_LRB) != 0)
|
|
goto out;
|
|
|
|
writeb(val, bp->i2c_control_regs + 0x1);
|
|
if (wait_for_pin(bp, &status))
|
|
goto out;
|
|
|
|
ret = 0;
|
|
|
|
out:
|
|
writeb(I2C_PCF_STOP, bp->i2c_control_regs + 0x0);
|
|
return ret;
|
|
}
|
|
|
|
int bbc_i2c_readb(struct bbc_i2c_client *client, unsigned char *byte, int off)
|
|
{
|
|
struct bbc_i2c_bus *bp = client->bp;
|
|
unsigned char address = client->address, status;
|
|
int ret = -1;
|
|
|
|
if (bp->i2c_bussel_reg != NULL)
|
|
writeb(client->bus, bp->i2c_bussel_reg);
|
|
|
|
writeb(address, bp->i2c_control_regs + 0x1);
|
|
writeb(I2C_PCF_START, bp->i2c_control_regs + 0x0);
|
|
if (wait_for_pin(bp, &status))
|
|
goto out;
|
|
|
|
writeb(off, bp->i2c_control_regs + 0x1);
|
|
if (wait_for_pin(bp, &status) ||
|
|
(status & I2C_PCF_LRB) != 0)
|
|
goto out;
|
|
|
|
writeb(I2C_PCF_STOP, bp->i2c_control_regs + 0x0);
|
|
|
|
address |= 0x1; /* READ */
|
|
|
|
writeb(address, bp->i2c_control_regs + 0x1);
|
|
writeb(I2C_PCF_START, bp->i2c_control_regs + 0x0);
|
|
if (wait_for_pin(bp, &status))
|
|
goto out;
|
|
|
|
/* Set PIN back to one so the device sends the first
|
|
* byte.
|
|
*/
|
|
(void) readb(bp->i2c_control_regs + 0x1);
|
|
if (wait_for_pin(bp, &status))
|
|
goto out;
|
|
|
|
writeb(I2C_PCF_ESO | I2C_PCF_ENI, bp->i2c_control_regs + 0x0);
|
|
*byte = readb(bp->i2c_control_regs + 0x1);
|
|
if (wait_for_pin(bp, &status))
|
|
goto out;
|
|
|
|
ret = 0;
|
|
|
|
out:
|
|
writeb(I2C_PCF_STOP, bp->i2c_control_regs + 0x0);
|
|
(void) readb(bp->i2c_control_regs + 0x1);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int bbc_i2c_write_buf(struct bbc_i2c_client *client,
|
|
char *buf, int len, int off)
|
|
{
|
|
int ret = 0;
|
|
|
|
while (len > 0) {
|
|
ret = bbc_i2c_writeb(client, *buf, off);
|
|
if (ret < 0)
|
|
break;
|
|
len--;
|
|
buf++;
|
|
off++;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
int bbc_i2c_read_buf(struct bbc_i2c_client *client,
|
|
char *buf, int len, int off)
|
|
{
|
|
int ret = 0;
|
|
|
|
while (len > 0) {
|
|
ret = bbc_i2c_readb(client, buf, off);
|
|
if (ret < 0)
|
|
break;
|
|
len--;
|
|
buf++;
|
|
off++;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
EXPORT_SYMBOL(bbc_i2c_getdev);
|
|
EXPORT_SYMBOL(bbc_i2c_attach);
|
|
EXPORT_SYMBOL(bbc_i2c_detach);
|
|
EXPORT_SYMBOL(bbc_i2c_writeb);
|
|
EXPORT_SYMBOL(bbc_i2c_readb);
|
|
EXPORT_SYMBOL(bbc_i2c_write_buf);
|
|
EXPORT_SYMBOL(bbc_i2c_read_buf);
|
|
|
|
static irqreturn_t bbc_i2c_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct bbc_i2c_bus *bp = dev_id;
|
|
|
|
/* PIN going from set to clear is the only event which
|
|
* makes the i2c assert an interrupt.
|
|
*/
|
|
if (bp->waiting &&
|
|
!(readb(bp->i2c_control_regs + 0x0) & I2C_PCF_PIN))
|
|
wake_up_interruptible(&bp->wq);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void reset_one_i2c(struct bbc_i2c_bus *bp)
|
|
{
|
|
writeb(I2C_PCF_PIN, bp->i2c_control_regs + 0x0);
|
|
writeb(bp->own, bp->i2c_control_regs + 0x1);
|
|
writeb(I2C_PCF_PIN | I2C_PCF_ES1, bp->i2c_control_regs + 0x0);
|
|
writeb(bp->clock, bp->i2c_control_regs + 0x1);
|
|
writeb(I2C_PCF_IDLE, bp->i2c_control_regs + 0x0);
|
|
}
|
|
|
|
static struct bbc_i2c_bus * attach_one_i2c(struct platform_device *op, int index)
|
|
{
|
|
struct bbc_i2c_bus *bp;
|
|
struct device_node *dp;
|
|
int entry;
|
|
|
|
bp = kzalloc(sizeof(*bp), GFP_KERNEL);
|
|
if (!bp)
|
|
return NULL;
|
|
|
|
INIT_LIST_HEAD(&bp->temps);
|
|
INIT_LIST_HEAD(&bp->fans);
|
|
|
|
bp->i2c_control_regs = of_ioremap(&op->resource[0], 0, 0x2, "bbc_i2c_regs");
|
|
if (!bp->i2c_control_regs)
|
|
goto fail;
|
|
|
|
if (op->num_resources == 2) {
|
|
bp->i2c_bussel_reg = of_ioremap(&op->resource[1], 0, 0x1, "bbc_i2c_bussel");
|
|
if (!bp->i2c_bussel_reg)
|
|
goto fail;
|
|
}
|
|
|
|
bp->waiting = 0;
|
|
init_waitqueue_head(&bp->wq);
|
|
if (request_irq(op->archdata.irqs[0], bbc_i2c_interrupt,
|
|
IRQF_SHARED, "bbc_i2c", bp))
|
|
goto fail;
|
|
|
|
bp->index = index;
|
|
bp->op = op;
|
|
|
|
spin_lock_init(&bp->lock);
|
|
|
|
entry = 0;
|
|
for (dp = op->dev.of_node->child;
|
|
dp && entry < 8;
|
|
dp = dp->sibling, entry++) {
|
|
struct platform_device *child_op;
|
|
|
|
child_op = of_find_device_by_node(dp);
|
|
bp->devs[entry].device = child_op;
|
|
bp->devs[entry].client_claimed = 0;
|
|
}
|
|
|
|
writeb(I2C_PCF_PIN, bp->i2c_control_regs + 0x0);
|
|
bp->own = readb(bp->i2c_control_regs + 0x01);
|
|
writeb(I2C_PCF_PIN | I2C_PCF_ES1, bp->i2c_control_regs + 0x0);
|
|
bp->clock = readb(bp->i2c_control_regs + 0x01);
|
|
|
|
printk(KERN_INFO "i2c-%d: Regs at %p, %d devices, own %02x, clock %02x.\n",
|
|
bp->index, bp->i2c_control_regs, entry, bp->own, bp->clock);
|
|
|
|
reset_one_i2c(bp);
|
|
|
|
return bp;
|
|
|
|
fail:
|
|
if (bp->i2c_bussel_reg)
|
|
of_iounmap(&op->resource[1], bp->i2c_bussel_reg, 1);
|
|
if (bp->i2c_control_regs)
|
|
of_iounmap(&op->resource[0], bp->i2c_control_regs, 2);
|
|
kfree(bp);
|
|
return NULL;
|
|
}
|
|
|
|
extern int bbc_envctrl_init(struct bbc_i2c_bus *bp);
|
|
extern void bbc_envctrl_cleanup(struct bbc_i2c_bus *bp);
|
|
|
|
static int bbc_i2c_probe(struct platform_device *op)
|
|
{
|
|
struct bbc_i2c_bus *bp;
|
|
int err, index = 0;
|
|
|
|
bp = attach_one_i2c(op, index);
|
|
if (!bp)
|
|
return -EINVAL;
|
|
|
|
err = bbc_envctrl_init(bp);
|
|
if (err) {
|
|
free_irq(op->archdata.irqs[0], bp);
|
|
if (bp->i2c_bussel_reg)
|
|
of_iounmap(&op->resource[0], bp->i2c_bussel_reg, 1);
|
|
if (bp->i2c_control_regs)
|
|
of_iounmap(&op->resource[1], bp->i2c_control_regs, 2);
|
|
kfree(bp);
|
|
} else {
|
|
dev_set_drvdata(&op->dev, bp);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static int bbc_i2c_remove(struct platform_device *op)
|
|
{
|
|
struct bbc_i2c_bus *bp = dev_get_drvdata(&op->dev);
|
|
|
|
bbc_envctrl_cleanup(bp);
|
|
|
|
free_irq(op->archdata.irqs[0], bp);
|
|
|
|
if (bp->i2c_bussel_reg)
|
|
of_iounmap(&op->resource[0], bp->i2c_bussel_reg, 1);
|
|
if (bp->i2c_control_regs)
|
|
of_iounmap(&op->resource[1], bp->i2c_control_regs, 2);
|
|
|
|
kfree(bp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id bbc_i2c_match[] = {
|
|
{
|
|
.name = "i2c",
|
|
.compatible = "SUNW,bbc-i2c",
|
|
},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, bbc_i2c_match);
|
|
|
|
static struct platform_driver bbc_i2c_driver = {
|
|
.driver = {
|
|
.name = "bbc_i2c",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = bbc_i2c_match,
|
|
},
|
|
.probe = bbc_i2c_probe,
|
|
.remove = bbc_i2c_remove,
|
|
};
|
|
|
|
module_platform_driver(bbc_i2c_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|