mirror of
https://github.com/torvalds/linux.git
synced 2024-12-22 10:56:40 +00:00
0a09dfa041
siu_dai.c is using snd_soc_register_dais(), even though array size of siu_i2s_dai is 1. OTOH, new API snd_soc_register_component() uses properly snd_soc_register_dai() (henceforth dai()) or snd_soc_register_dais() (henceforth dais()) via num_dai. Then, cpu_dai_name will be "siu-i2s-dai" if dais() was used, and it will be "siu-pcm-audio" if dai() was used. Therefore this patch fixup migor_dai :: cpu_dai_name too. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
859 lines
21 KiB
C
859 lines
21 KiB
C
/*
|
|
* siu_dai.c - ALSA SoC driver for Renesas SH7343, SH7722 SIU peripheral.
|
|
*
|
|
* Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
|
|
* Copyright (C) 2006 Carlos Munoz <carlos@kenati.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <asm/clock.h>
|
|
#include <asm/siu.h>
|
|
|
|
#include <sound/control.h>
|
|
#include <sound/soc.h>
|
|
|
|
#include "siu.h"
|
|
|
|
/* Board specifics */
|
|
#if defined(CONFIG_CPU_SUBTYPE_SH7722)
|
|
# define SIU_MAX_VOLUME 0x1000
|
|
#else
|
|
# define SIU_MAX_VOLUME 0x7fff
|
|
#endif
|
|
|
|
#define PRAM_SIZE 0x2000
|
|
#define XRAM_SIZE 0x800
|
|
#define YRAM_SIZE 0x800
|
|
|
|
#define XRAM_OFFSET 0x4000
|
|
#define YRAM_OFFSET 0x6000
|
|
#define REG_OFFSET 0xc000
|
|
|
|
#define PLAYBACK_ENABLED 1
|
|
#define CAPTURE_ENABLED 2
|
|
|
|
#define VOLUME_CAPTURE 0
|
|
#define VOLUME_PLAYBACK 1
|
|
#define DFLT_VOLUME_LEVEL 0x08000800
|
|
|
|
/*
|
|
* SPDIF is only available on port A and on some SIU implementations it is only
|
|
* available for input. Due to the lack of hardware to test it, SPDIF is left
|
|
* disabled in this driver version
|
|
*/
|
|
struct format_flag {
|
|
u32 i2s;
|
|
u32 pcm;
|
|
u32 spdif;
|
|
u32 mask;
|
|
};
|
|
|
|
struct port_flag {
|
|
struct format_flag playback;
|
|
struct format_flag capture;
|
|
};
|
|
|
|
struct siu_info *siu_i2s_data;
|
|
|
|
static struct port_flag siu_flags[SIU_PORT_NUM] = {
|
|
[SIU_PORT_A] = {
|
|
.playback = {
|
|
.i2s = 0x50000000,
|
|
.pcm = 0x40000000,
|
|
.spdif = 0x80000000, /* not on all SIU versions */
|
|
.mask = 0xd0000000,
|
|
},
|
|
.capture = {
|
|
.i2s = 0x05000000,
|
|
.pcm = 0x04000000,
|
|
.spdif = 0x08000000,
|
|
.mask = 0x0d000000,
|
|
},
|
|
},
|
|
[SIU_PORT_B] = {
|
|
.playback = {
|
|
.i2s = 0x00500000,
|
|
.pcm = 0x00400000,
|
|
.spdif = 0, /* impossible - turn off */
|
|
.mask = 0x00500000,
|
|
},
|
|
.capture = {
|
|
.i2s = 0x00050000,
|
|
.pcm = 0x00040000,
|
|
.spdif = 0, /* impossible - turn off */
|
|
.mask = 0x00050000,
|
|
},
|
|
},
|
|
};
|
|
|
|
static void siu_dai_start(struct siu_port *port_info)
|
|
{
|
|
struct siu_info *info = siu_i2s_data;
|
|
u32 __iomem *base = info->reg;
|
|
|
|
dev_dbg(port_info->pcm->card->dev, "%s\n", __func__);
|
|
|
|
/* Issue software reset to siu */
|
|
siu_write32(base + SIU_SRCTL, 0);
|
|
|
|
/* Wait for the reset to take effect */
|
|
udelay(1);
|
|
|
|
port_info->stfifo = 0;
|
|
port_info->trdat = 0;
|
|
|
|
/* portA, portB, SIU operate */
|
|
siu_write32(base + SIU_SRCTL, 0x301);
|
|
|
|
/* portA=256fs, portB=256fs */
|
|
siu_write32(base + SIU_CKCTL, 0x40400000);
|
|
|
|
/* portA's BRG does not divide SIUCKA */
|
|
siu_write32(base + SIU_BRGASEL, 0);
|
|
siu_write32(base + SIU_BRRA, 0);
|
|
|
|
/* portB's BRG divides SIUCKB by half */
|
|
siu_write32(base + SIU_BRGBSEL, 1);
|
|
siu_write32(base + SIU_BRRB, 0);
|
|
|
|
siu_write32(base + SIU_IFCTL, 0x44440000);
|
|
|
|
/* portA: 32 bit/fs, master; portB: 32 bit/fs, master */
|
|
siu_write32(base + SIU_SFORM, 0x0c0c0000);
|
|
|
|
/*
|
|
* Volume levels: looks like the DSP firmware implements volume controls
|
|
* differently from what's described in the datasheet
|
|
*/
|
|
siu_write32(base + SIU_SBDVCA, port_info->playback.volume);
|
|
siu_write32(base + SIU_SBDVCB, port_info->capture.volume);
|
|
}
|
|
|
|
static void siu_dai_stop(struct siu_port *port_info)
|
|
{
|
|
struct siu_info *info = siu_i2s_data;
|
|
u32 __iomem *base = info->reg;
|
|
|
|
/* SIU software reset */
|
|
siu_write32(base + SIU_SRCTL, 0);
|
|
}
|
|
|
|
static void siu_dai_spbAselect(struct siu_port *port_info)
|
|
{
|
|
struct siu_info *info = siu_i2s_data;
|
|
struct siu_firmware *fw = &info->fw;
|
|
u32 *ydef = fw->yram0;
|
|
u32 idx;
|
|
|
|
/* path A use */
|
|
if (!info->port_id)
|
|
idx = 1; /* portA */
|
|
else
|
|
idx = 2; /* portB */
|
|
|
|
ydef[0] = (fw->spbpar[idx].ab1a << 16) |
|
|
(fw->spbpar[idx].ab0a << 8) |
|
|
(fw->spbpar[idx].dir << 7) | 3;
|
|
ydef[1] = fw->yram0[1]; /* 0x03000300 */
|
|
ydef[2] = (16 / 2) << 24;
|
|
ydef[3] = fw->yram0[3]; /* 0 */
|
|
ydef[4] = fw->yram0[4]; /* 0 */
|
|
ydef[7] = fw->spbpar[idx].event;
|
|
port_info->stfifo |= fw->spbpar[idx].stfifo;
|
|
port_info->trdat |= fw->spbpar[idx].trdat;
|
|
}
|
|
|
|
static void siu_dai_spbBselect(struct siu_port *port_info)
|
|
{
|
|
struct siu_info *info = siu_i2s_data;
|
|
struct siu_firmware *fw = &info->fw;
|
|
u32 *ydef = fw->yram0;
|
|
u32 idx;
|
|
|
|
/* path B use */
|
|
if (!info->port_id)
|
|
idx = 7; /* portA */
|
|
else
|
|
idx = 8; /* portB */
|
|
|
|
ydef[5] = (fw->spbpar[idx].ab1a << 16) |
|
|
(fw->spbpar[idx].ab0a << 8) | 1;
|
|
ydef[6] = fw->spbpar[idx].event;
|
|
port_info->stfifo |= fw->spbpar[idx].stfifo;
|
|
port_info->trdat |= fw->spbpar[idx].trdat;
|
|
}
|
|
|
|
static void siu_dai_open(struct siu_stream *siu_stream)
|
|
{
|
|
struct siu_info *info = siu_i2s_data;
|
|
u32 __iomem *base = info->reg;
|
|
u32 srctl, ifctl;
|
|
|
|
srctl = siu_read32(base + SIU_SRCTL);
|
|
ifctl = siu_read32(base + SIU_IFCTL);
|
|
|
|
switch (info->port_id) {
|
|
case SIU_PORT_A:
|
|
/* portA operates */
|
|
srctl |= 0x200;
|
|
ifctl &= ~0xc2;
|
|
break;
|
|
case SIU_PORT_B:
|
|
/* portB operates */
|
|
srctl |= 0x100;
|
|
ifctl &= ~0x31;
|
|
break;
|
|
}
|
|
|
|
siu_write32(base + SIU_SRCTL, srctl);
|
|
/* Unmute and configure portA */
|
|
siu_write32(base + SIU_IFCTL, ifctl);
|
|
}
|
|
|
|
/*
|
|
* At the moment only fixed Left-upper, Left-lower, Right-upper, Right-lower
|
|
* packing is supported
|
|
*/
|
|
static void siu_dai_pcmdatapack(struct siu_stream *siu_stream)
|
|
{
|
|
struct siu_info *info = siu_i2s_data;
|
|
u32 __iomem *base = info->reg;
|
|
u32 dpak;
|
|
|
|
dpak = siu_read32(base + SIU_DPAK);
|
|
|
|
switch (info->port_id) {
|
|
case SIU_PORT_A:
|
|
dpak &= ~0xc0000000;
|
|
break;
|
|
case SIU_PORT_B:
|
|
dpak &= ~0x00c00000;
|
|
break;
|
|
}
|
|
|
|
siu_write32(base + SIU_DPAK, dpak);
|
|
}
|
|
|
|
static int siu_dai_spbstart(struct siu_port *port_info)
|
|
{
|
|
struct siu_info *info = siu_i2s_data;
|
|
u32 __iomem *base = info->reg;
|
|
struct siu_firmware *fw = &info->fw;
|
|
u32 *ydef = fw->yram0;
|
|
int cnt;
|
|
u32 __iomem *add;
|
|
u32 *ptr;
|
|
|
|
/* Load SPB Program in PRAM */
|
|
ptr = fw->pram0;
|
|
add = info->pram;
|
|
for (cnt = 0; cnt < PRAM0_SIZE; cnt++, add++, ptr++)
|
|
siu_write32(add, *ptr);
|
|
|
|
ptr = fw->pram1;
|
|
add = info->pram + (0x0100 / sizeof(u32));
|
|
for (cnt = 0; cnt < PRAM1_SIZE; cnt++, add++, ptr++)
|
|
siu_write32(add, *ptr);
|
|
|
|
/* XRAM initialization */
|
|
add = info->xram;
|
|
for (cnt = 0; cnt < XRAM0_SIZE + XRAM1_SIZE + XRAM2_SIZE; cnt++, add++)
|
|
siu_write32(add, 0);
|
|
|
|
/* YRAM variable area initialization */
|
|
add = info->yram;
|
|
for (cnt = 0; cnt < YRAM_DEF_SIZE; cnt++, add++)
|
|
siu_write32(add, ydef[cnt]);
|
|
|
|
/* YRAM FIR coefficient area initialization */
|
|
add = info->yram + (0x0200 / sizeof(u32));
|
|
for (cnt = 0; cnt < YRAM_FIR_SIZE; cnt++, add++)
|
|
siu_write32(add, fw->yram_fir_coeff[cnt]);
|
|
|
|
/* YRAM IIR coefficient area initialization */
|
|
add = info->yram + (0x0600 / sizeof(u32));
|
|
for (cnt = 0; cnt < YRAM_IIR_SIZE; cnt++, add++)
|
|
siu_write32(add, 0);
|
|
|
|
siu_write32(base + SIU_TRDAT, port_info->trdat);
|
|
port_info->trdat = 0x0;
|
|
|
|
|
|
/* SPB start condition: software */
|
|
siu_write32(base + SIU_SBACTIV, 0);
|
|
/* Start SPB */
|
|
siu_write32(base + SIU_SBCTL, 0xc0000000);
|
|
/* Wait for program to halt */
|
|
cnt = 0x10000;
|
|
while (--cnt && siu_read32(base + SIU_SBCTL) != 0x80000000)
|
|
cpu_relax();
|
|
|
|
if (!cnt)
|
|
return -EBUSY;
|
|
|
|
/* SPB program start address setting */
|
|
siu_write32(base + SIU_SBPSET, 0x00400000);
|
|
/* SPB hardware start(FIFOCTL source) */
|
|
siu_write32(base + SIU_SBACTIV, 0xc0000000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void siu_dai_spbstop(struct siu_port *port_info)
|
|
{
|
|
struct siu_info *info = siu_i2s_data;
|
|
u32 __iomem *base = info->reg;
|
|
|
|
siu_write32(base + SIU_SBACTIV, 0);
|
|
/* SPB stop */
|
|
siu_write32(base + SIU_SBCTL, 0);
|
|
|
|
port_info->stfifo = 0;
|
|
}
|
|
|
|
/* API functions */
|
|
|
|
/* Playback and capture hardware properties are identical */
|
|
static struct snd_pcm_hardware siu_dai_pcm_hw = {
|
|
.info = SNDRV_PCM_INFO_INTERLEAVED,
|
|
.formats = SNDRV_PCM_FMTBIT_S16,
|
|
.rates = SNDRV_PCM_RATE_8000_48000,
|
|
.rate_min = 8000,
|
|
.rate_max = 48000,
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.buffer_bytes_max = SIU_BUFFER_BYTES_MAX,
|
|
.period_bytes_min = SIU_PERIOD_BYTES_MIN,
|
|
.period_bytes_max = SIU_PERIOD_BYTES_MAX,
|
|
.periods_min = SIU_PERIODS_MIN,
|
|
.periods_max = SIU_PERIODS_MAX,
|
|
};
|
|
|
|
static int siu_dai_info_volume(struct snd_kcontrol *kctrl,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
struct siu_port *port_info = snd_kcontrol_chip(kctrl);
|
|
|
|
dev_dbg(port_info->pcm->card->dev, "%s\n", __func__);
|
|
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
|
|
uinfo->count = 2;
|
|
uinfo->value.integer.min = 0;
|
|
uinfo->value.integer.max = SIU_MAX_VOLUME;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int siu_dai_get_volume(struct snd_kcontrol *kctrl,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct siu_port *port_info = snd_kcontrol_chip(kctrl);
|
|
struct device *dev = port_info->pcm->card->dev;
|
|
u32 vol;
|
|
|
|
dev_dbg(dev, "%s\n", __func__);
|
|
|
|
switch (kctrl->private_value) {
|
|
case VOLUME_PLAYBACK:
|
|
/* Playback is always on port 0 */
|
|
vol = port_info->playback.volume;
|
|
ucontrol->value.integer.value[0] = vol & 0xffff;
|
|
ucontrol->value.integer.value[1] = vol >> 16 & 0xffff;
|
|
break;
|
|
case VOLUME_CAPTURE:
|
|
/* Capture is always on port 1 */
|
|
vol = port_info->capture.volume;
|
|
ucontrol->value.integer.value[0] = vol & 0xffff;
|
|
ucontrol->value.integer.value[1] = vol >> 16 & 0xffff;
|
|
break;
|
|
default:
|
|
dev_err(dev, "%s() invalid private_value=%ld\n",
|
|
__func__, kctrl->private_value);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int siu_dai_put_volume(struct snd_kcontrol *kctrl,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct siu_port *port_info = snd_kcontrol_chip(kctrl);
|
|
struct device *dev = port_info->pcm->card->dev;
|
|
struct siu_info *info = siu_i2s_data;
|
|
u32 __iomem *base = info->reg;
|
|
u32 new_vol;
|
|
u32 cur_vol;
|
|
|
|
dev_dbg(dev, "%s\n", __func__);
|
|
|
|
if (ucontrol->value.integer.value[0] < 0 ||
|
|
ucontrol->value.integer.value[0] > SIU_MAX_VOLUME ||
|
|
ucontrol->value.integer.value[1] < 0 ||
|
|
ucontrol->value.integer.value[1] > SIU_MAX_VOLUME)
|
|
return -EINVAL;
|
|
|
|
new_vol = ucontrol->value.integer.value[0] |
|
|
ucontrol->value.integer.value[1] << 16;
|
|
|
|
/* See comment above - DSP firmware implementation */
|
|
switch (kctrl->private_value) {
|
|
case VOLUME_PLAYBACK:
|
|
/* Playback is always on port 0 */
|
|
cur_vol = port_info->playback.volume;
|
|
siu_write32(base + SIU_SBDVCA, new_vol);
|
|
port_info->playback.volume = new_vol;
|
|
break;
|
|
case VOLUME_CAPTURE:
|
|
/* Capture is always on port 1 */
|
|
cur_vol = port_info->capture.volume;
|
|
siu_write32(base + SIU_SBDVCB, new_vol);
|
|
port_info->capture.volume = new_vol;
|
|
break;
|
|
default:
|
|
dev_err(dev, "%s() invalid private_value=%ld\n",
|
|
__func__, kctrl->private_value);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (cur_vol != new_vol)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct snd_kcontrol_new playback_controls = {
|
|
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
.name = "PCM Playback Volume",
|
|
.index = 0,
|
|
.info = siu_dai_info_volume,
|
|
.get = siu_dai_get_volume,
|
|
.put = siu_dai_put_volume,
|
|
.private_value = VOLUME_PLAYBACK,
|
|
};
|
|
|
|
static struct snd_kcontrol_new capture_controls = {
|
|
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
.name = "PCM Capture Volume",
|
|
.index = 0,
|
|
.info = siu_dai_info_volume,
|
|
.get = siu_dai_get_volume,
|
|
.put = siu_dai_put_volume,
|
|
.private_value = VOLUME_CAPTURE,
|
|
};
|
|
|
|
int siu_init_port(int port, struct siu_port **port_info, struct snd_card *card)
|
|
{
|
|
struct device *dev = card->dev;
|
|
struct snd_kcontrol *kctrl;
|
|
int ret;
|
|
|
|
*port_info = kzalloc(sizeof(**port_info), GFP_KERNEL);
|
|
if (!*port_info)
|
|
return -ENOMEM;
|
|
|
|
dev_dbg(dev, "%s: port #%d@%p\n", __func__, port, *port_info);
|
|
|
|
(*port_info)->playback.volume = DFLT_VOLUME_LEVEL;
|
|
(*port_info)->capture.volume = DFLT_VOLUME_LEVEL;
|
|
|
|
/*
|
|
* Add mixer support. The SPB is used to change the volume. Both
|
|
* ports use the same SPB. Therefore, we only register one
|
|
* control instance since it will be used by both channels.
|
|
* In error case we continue without controls.
|
|
*/
|
|
kctrl = snd_ctl_new1(&playback_controls, *port_info);
|
|
ret = snd_ctl_add(card, kctrl);
|
|
if (ret < 0)
|
|
dev_err(dev,
|
|
"failed to add playback controls %p port=%d err=%d\n",
|
|
kctrl, port, ret);
|
|
|
|
kctrl = snd_ctl_new1(&capture_controls, *port_info);
|
|
ret = snd_ctl_add(card, kctrl);
|
|
if (ret < 0)
|
|
dev_err(dev,
|
|
"failed to add capture controls %p port=%d err=%d\n",
|
|
kctrl, port, ret);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void siu_free_port(struct siu_port *port_info)
|
|
{
|
|
kfree(port_info);
|
|
}
|
|
|
|
static int siu_dai_startup(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct siu_info *info = snd_soc_dai_get_drvdata(dai);
|
|
struct snd_pcm_runtime *rt = substream->runtime;
|
|
struct siu_port *port_info = siu_port_info(substream);
|
|
int ret;
|
|
|
|
dev_dbg(substream->pcm->card->dev, "%s: port=%d@%p\n", __func__,
|
|
info->port_id, port_info);
|
|
|
|
snd_soc_set_runtime_hwparams(substream, &siu_dai_pcm_hw);
|
|
|
|
ret = snd_pcm_hw_constraint_integer(rt, SNDRV_PCM_HW_PARAM_PERIODS);
|
|
if (unlikely(ret < 0))
|
|
return ret;
|
|
|
|
siu_dai_start(port_info);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void siu_dai_shutdown(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct siu_info *info = snd_soc_dai_get_drvdata(dai);
|
|
struct siu_port *port_info = siu_port_info(substream);
|
|
|
|
dev_dbg(substream->pcm->card->dev, "%s: port=%d@%p\n", __func__,
|
|
info->port_id, port_info);
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
port_info->play_cap &= ~PLAYBACK_ENABLED;
|
|
else
|
|
port_info->play_cap &= ~CAPTURE_ENABLED;
|
|
|
|
/* Stop the siu if the other stream is not using it */
|
|
if (!port_info->play_cap) {
|
|
/* during stmread or stmwrite ? */
|
|
BUG_ON(port_info->playback.rw_flg || port_info->capture.rw_flg);
|
|
siu_dai_spbstop(port_info);
|
|
siu_dai_stop(port_info);
|
|
}
|
|
}
|
|
|
|
/* PCM part of siu_dai_playback_prepare() / siu_dai_capture_prepare() */
|
|
static int siu_dai_prepare(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct siu_info *info = snd_soc_dai_get_drvdata(dai);
|
|
struct snd_pcm_runtime *rt = substream->runtime;
|
|
struct siu_port *port_info = siu_port_info(substream);
|
|
struct siu_stream *siu_stream;
|
|
int self, ret;
|
|
|
|
dev_dbg(substream->pcm->card->dev,
|
|
"%s: port %d, active streams %lx, %d channels\n",
|
|
__func__, info->port_id, port_info->play_cap, rt->channels);
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
|
|
self = PLAYBACK_ENABLED;
|
|
siu_stream = &port_info->playback;
|
|
} else {
|
|
self = CAPTURE_ENABLED;
|
|
siu_stream = &port_info->capture;
|
|
}
|
|
|
|
/* Set up the siu if not already done */
|
|
if (!port_info->play_cap) {
|
|
siu_stream->rw_flg = 0; /* stream-data transfer flag */
|
|
|
|
siu_dai_spbAselect(port_info);
|
|
siu_dai_spbBselect(port_info);
|
|
|
|
siu_dai_open(siu_stream);
|
|
|
|
siu_dai_pcmdatapack(siu_stream);
|
|
|
|
ret = siu_dai_spbstart(port_info);
|
|
if (ret < 0)
|
|
goto fail;
|
|
} else {
|
|
ret = 0;
|
|
}
|
|
|
|
port_info->play_cap |= self;
|
|
|
|
fail:
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* SIU can set bus format to I2S / PCM / SPDIF independently for playback and
|
|
* capture, however, the current API sets the bus format globally for a DAI.
|
|
*/
|
|
static int siu_dai_set_fmt(struct snd_soc_dai *dai,
|
|
unsigned int fmt)
|
|
{
|
|
struct siu_info *info = snd_soc_dai_get_drvdata(dai);
|
|
u32 __iomem *base = info->reg;
|
|
u32 ifctl;
|
|
|
|
dev_dbg(dai->dev, "%s: fmt 0x%x on port %d\n",
|
|
__func__, fmt, info->port_id);
|
|
|
|
if (info->port_id < 0)
|
|
return -ENODEV;
|
|
|
|
/* Here select between I2S / PCM / SPDIF */
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
ifctl = siu_flags[info->port_id].playback.i2s |
|
|
siu_flags[info->port_id].capture.i2s;
|
|
break;
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
ifctl = siu_flags[info->port_id].playback.pcm |
|
|
siu_flags[info->port_id].capture.pcm;
|
|
break;
|
|
/* SPDIF disabled - see comment at the top */
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
ifctl |= ~(siu_flags[info->port_id].playback.mask |
|
|
siu_flags[info->port_id].capture.mask) &
|
|
siu_read32(base + SIU_IFCTL);
|
|
siu_write32(base + SIU_IFCTL, ifctl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int siu_dai_set_sysclk(struct snd_soc_dai *dai, int clk_id,
|
|
unsigned int freq, int dir)
|
|
{
|
|
struct clk *siu_clk, *parent_clk;
|
|
char *siu_name, *parent_name;
|
|
int ret;
|
|
|
|
if (dir != SND_SOC_CLOCK_IN)
|
|
return -EINVAL;
|
|
|
|
dev_dbg(dai->dev, "%s: using clock %d\n", __func__, clk_id);
|
|
|
|
switch (clk_id) {
|
|
case SIU_CLKA_PLL:
|
|
siu_name = "siua_clk";
|
|
parent_name = "pll_clk";
|
|
break;
|
|
case SIU_CLKA_EXT:
|
|
siu_name = "siua_clk";
|
|
parent_name = "siumcka_clk";
|
|
break;
|
|
case SIU_CLKB_PLL:
|
|
siu_name = "siub_clk";
|
|
parent_name = "pll_clk";
|
|
break;
|
|
case SIU_CLKB_EXT:
|
|
siu_name = "siub_clk";
|
|
parent_name = "siumckb_clk";
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
siu_clk = clk_get(dai->dev, siu_name);
|
|
if (IS_ERR(siu_clk)) {
|
|
dev_err(dai->dev, "%s: cannot get a SIU clock: %ld\n", __func__,
|
|
PTR_ERR(siu_clk));
|
|
return PTR_ERR(siu_clk);
|
|
}
|
|
|
|
parent_clk = clk_get(dai->dev, parent_name);
|
|
if (IS_ERR(parent_clk)) {
|
|
ret = PTR_ERR(parent_clk);
|
|
dev_err(dai->dev, "cannot get a SIU clock parent: %d\n", ret);
|
|
goto epclkget;
|
|
}
|
|
|
|
ret = clk_set_parent(siu_clk, parent_clk);
|
|
if (ret < 0) {
|
|
dev_err(dai->dev, "cannot reparent the SIU clock: %d\n", ret);
|
|
goto eclksetp;
|
|
}
|
|
|
|
ret = clk_set_rate(siu_clk, freq);
|
|
if (ret < 0)
|
|
dev_err(dai->dev, "cannot set SIU clock rate: %d\n", ret);
|
|
|
|
/* TODO: when clkdev gets reference counting we'll move these to siu_dai_shutdown() */
|
|
eclksetp:
|
|
clk_put(parent_clk);
|
|
epclkget:
|
|
clk_put(siu_clk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct snd_soc_dai_ops siu_dai_ops = {
|
|
.startup = siu_dai_startup,
|
|
.shutdown = siu_dai_shutdown,
|
|
.prepare = siu_dai_prepare,
|
|
.set_sysclk = siu_dai_set_sysclk,
|
|
.set_fmt = siu_dai_set_fmt,
|
|
};
|
|
|
|
static struct snd_soc_dai_driver siu_i2s_dai = {
|
|
.name = "siu-i2s-dai",
|
|
.playback = {
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.formats = SNDRV_PCM_FMTBIT_S16,
|
|
.rates = SNDRV_PCM_RATE_8000_48000,
|
|
},
|
|
.capture = {
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.formats = SNDRV_PCM_FMTBIT_S16,
|
|
.rates = SNDRV_PCM_RATE_8000_48000,
|
|
},
|
|
.ops = &siu_dai_ops,
|
|
};
|
|
|
|
static const struct snd_soc_component_driver siu_i2s_component = {
|
|
.name = "siu-i2s",
|
|
};
|
|
|
|
static int siu_probe(struct platform_device *pdev)
|
|
{
|
|
const struct firmware *fw_entry;
|
|
struct resource *res, *region;
|
|
struct siu_info *info;
|
|
int ret;
|
|
|
|
info = kmalloc(sizeof(*info), GFP_KERNEL);
|
|
if (!info)
|
|
return -ENOMEM;
|
|
siu_i2s_data = info;
|
|
info->dev = &pdev->dev;
|
|
|
|
ret = request_firmware(&fw_entry, "siu_spb.bin", &pdev->dev);
|
|
if (ret)
|
|
goto ereqfw;
|
|
|
|
/*
|
|
* Loaded firmware is "const" - read only, but we have to modify it in
|
|
* snd_siu_sh7343_spbAselect() and snd_siu_sh7343_spbBselect()
|
|
*/
|
|
memcpy(&info->fw, fw_entry->data, fw_entry->size);
|
|
|
|
release_firmware(fw_entry);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res) {
|
|
ret = -ENODEV;
|
|
goto egetres;
|
|
}
|
|
|
|
region = request_mem_region(res->start, resource_size(res),
|
|
pdev->name);
|
|
if (!region) {
|
|
dev_err(&pdev->dev, "SIU region already claimed\n");
|
|
ret = -EBUSY;
|
|
goto ereqmemreg;
|
|
}
|
|
|
|
ret = -ENOMEM;
|
|
info->pram = ioremap(res->start, PRAM_SIZE);
|
|
if (!info->pram)
|
|
goto emappram;
|
|
info->xram = ioremap(res->start + XRAM_OFFSET, XRAM_SIZE);
|
|
if (!info->xram)
|
|
goto emapxram;
|
|
info->yram = ioremap(res->start + YRAM_OFFSET, YRAM_SIZE);
|
|
if (!info->yram)
|
|
goto emapyram;
|
|
info->reg = ioremap(res->start + REG_OFFSET, resource_size(res) -
|
|
REG_OFFSET);
|
|
if (!info->reg)
|
|
goto emapreg;
|
|
|
|
dev_set_drvdata(&pdev->dev, info);
|
|
|
|
/* register using ARRAY version so we can keep dai name */
|
|
ret = snd_soc_register_component(&pdev->dev, &siu_i2s_component,
|
|
&siu_i2s_dai, 1);
|
|
if (ret < 0)
|
|
goto edaiinit;
|
|
|
|
ret = snd_soc_register_platform(&pdev->dev, &siu_platform);
|
|
if (ret < 0)
|
|
goto esocregp;
|
|
|
|
pm_runtime_enable(&pdev->dev);
|
|
|
|
return ret;
|
|
|
|
esocregp:
|
|
snd_soc_unregister_component(&pdev->dev);
|
|
edaiinit:
|
|
iounmap(info->reg);
|
|
emapreg:
|
|
iounmap(info->yram);
|
|
emapyram:
|
|
iounmap(info->xram);
|
|
emapxram:
|
|
iounmap(info->pram);
|
|
emappram:
|
|
release_mem_region(res->start, resource_size(res));
|
|
ereqmemreg:
|
|
egetres:
|
|
ereqfw:
|
|
kfree(info);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int siu_remove(struct platform_device *pdev)
|
|
{
|
|
struct siu_info *info = dev_get_drvdata(&pdev->dev);
|
|
struct resource *res;
|
|
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
snd_soc_unregister_platform(&pdev->dev);
|
|
snd_soc_unregister_component(&pdev->dev);
|
|
|
|
iounmap(info->reg);
|
|
iounmap(info->yram);
|
|
iounmap(info->xram);
|
|
iounmap(info->pram);
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (res)
|
|
release_mem_region(res->start, resource_size(res));
|
|
kfree(info);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver siu_driver = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "siu-pcm-audio",
|
|
},
|
|
.probe = siu_probe,
|
|
.remove = siu_remove,
|
|
};
|
|
|
|
module_platform_driver(siu_driver);
|
|
|
|
MODULE_AUTHOR("Carlos Munoz <carlos@kenati.com>");
|
|
MODULE_DESCRIPTION("ALSA SoC SH7722 SIU driver");
|
|
MODULE_LICENSE("GPL");
|