João Paulo Rechi Vita df2445bf77 Bluetooth: Add a new 13d3:3496 QCA_ROME device ... Without this patch we can't establish a SCO connection with this adapter. This adapter is named "IMC Networks" under lsusb. T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3496 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>		2018-05-18 06:37:52 +02:00
..
ath3k.c	Bluetooth: ath3k: fix checkpatch warning	2018-02-07 09:46:09 +01:00
bcm203x.c	Bluetooth: mark expected switch fall-throughs	2017-10-14 09:25:51 +02:00
bfusb.c	networking: introduce and use skb_put_data()	2017-06-16 11:48:37 -04:00
bluecard_cs.c	Bluetooth: Fix a possible sleep-in-atomic bug in bluecard_write_wakeup	2017-12-13 14:38:59 +01:00
bpa10x.c	Bluetooth: bpa10x: Use separate h4_recv_buf helper	2018-04-01 14:25:32 +02:00
bt3c_cs.c	Bluetooth: Use bt_dev_err and bt_dev_info when possible	2017-10-30 12:25:45 +02:00
btbcm.c	Bluetooth: btbcm: btbcm_initialize(): Initialize hw_name to "BCM"	2018-05-18 06:37:51 +02:00
btbcm.h	Bluetooth: btbcm: Allow using btbcm_initialize() for reinit	2018-05-18 06:37:51 +02:00
btintel.c	Bluetooth: btintel: Create common function for firmware download	2018-01-25 09:28:40 +01:00
btintel.h	Bluetooth: btintel: Create common function for firmware download	2018-01-25 09:28:40 +01:00
btmrvl_debugfs.c	Bluetooth: btmrvl add firmware dump support	2014-12-03 17:35:51 +01:00
btmrvl_drv.h	Bluetooth: btmrvl: drop duplicate header slab.h	2016-12-08 07:44:56 +01:00
btmrvl_main.c	Bluetooth: btmrvl_main: Replace GFP_ATOMIC with GFP_KERNEL in btmrvl_send_sync_cmd	2018-02-07 09:48:56 +01:00
btmrvl_sdio.c	Bluetooth: btmrvl: Delete an unnecessary variable initialisation in btmrvl_sdio_card_to_host()	2018-04-01 14:25:31 +02:00
btmrvl_sdio.h	btmrvl: add platform specific wakeup interrupt support	2016-05-02 19:26:15 +02:00
btqca.c	Bluetooth: btqca: Add AR3002 rampatch support	2018-05-18 06:37:52 +02:00
btqca.h	Bluetooth: btqca: Add AR3002 rampatch support	2018-05-18 06:37:52 +02:00
btqcomsmd.c	Bluetooth: btqcomsmd: Fix rx/tx stats	2018-05-18 06:37:50 +02:00
btrsi.c	Bluetooth: btrsi: remove unused including <linux/version.h>	2018-04-01 21:43:02 +03:00
btrtl.c	Bluetooth: btrtl: Add RTL8723D and RTL8821C devices	2018-02-11 21:50:35 +01:00
btrtl.h	Bluetooth: btrtl: Create separate module for Realtek BT driver	2015-05-14 12:04:12 +02:00
btsdio.c	Bluetooth: btsdio: Do not bind to non-removable BCM43341	2017-12-13 00:28:41 +01:00
btusb.c	Bluetooth: Add a new 13d3:3496 QCA_ROME device	2018-05-18 06:37:52 +02:00
btwilink.c	Bluetooth: Style fix - align block comments	2017-07-22 08:39:39 +02:00
dtl1_cs.c	networking: add and use skb_put_u8()	2017-06-16 11:48:40 -04:00
h4_recv.h	Bluetooth: bpa10x: Use separate h4_recv_buf helper	2018-04-01 14:25:32 +02:00
hci_ag6xx.c	Bluetooth: hci_uart: Add diag and address support for Intel/AG6xx	2016-02-29 19:25:22 +02:00
hci_ath.c	Bluetooth: hci_ath: Replace mdelay with msleep in ath_wakeup_ar3k	2018-02-07 09:47:04 +01:00
hci_bcm.c	Bluetooth: btbcm: Allow using btbcm_initialize() for reinit	2018-05-18 06:37:51 +02:00
hci_bcsp.c	Bluetooth: Convert timers to use timer_setup()	2017-10-06 20:37:11 +02:00
hci_h4.c	Bluetooth: Use bt_dev_err and bt_dev_info when possible	2017-10-30 12:25:45 +02:00
hci_h5.c	Bluetooth: Convert timers to use timer_setup()	2017-10-06 20:37:11 +02:00
hci_intel.c	Bluetooth: btintel: Create common function for firmware download	2018-01-25 09:28:40 +01:00
hci_ldisc.c	Bluetooth: hci_ldisc: Provide a 'default' switch case	2018-05-18 06:37:52 +02:00
hci_ll.c	Bluetooth: hci_ll: Convert to use h4_recv_buf helper	2018-04-01 14:25:32 +02:00
hci_mrvl.c	networking: introduce and use skb_put_data()	2017-06-16 11:48:37 -04:00
hci_nokia.c	Bluetooth: hci_nokia: Use new hci_uart_unregister_device() function	2017-07-20 11:18:36 +02:00
hci_qca.c	Bluetooth: hci_qca: Add serdev support	2018-05-18 06:37:51 +02:00
hci_serdev.c	Bluetooth: hci_serdev: Init hci_uart proto_lock to avoid oops	2017-12-13 00:28:41 +01:00
hci_uart.h	Bluetooth: hci_ldisc: Allow sleeping while proto locks are held.	2017-10-29 14:03:28 +01:00
hci_vhci.c	vfs: do bulk POLL* -> EPOLL* replacement	2018-02-11 14:34:03 -08:00
Kconfig	Bluetooth: hci_qca: Add serdev support	2018-05-18 06:37:51 +02:00
Makefile	Bluetooth: Remove unused btuart_cs driver	2018-04-01 14:25:32 +02:00