linux/arch/x86/xen/xen-asm.S
Juergen Gross 56415c4c3d x86/xen: eliminate xen-asm_64.S
With 32-bit pv-guest support removed xen-asm_64.S can be merged with
xen-asm.S

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-11 08:26:58 +02:00

318 lines
7.6 KiB
ArmAsm

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Asm versions of Xen pv-ops, suitable for direct use.
*
* We only bother with direct forms (ie, vcpu in percpu data) of the
* operations here; the indirect forms are better handled in C.
*/
#include <asm/errno.h>
#include <asm/asm-offsets.h>
#include <asm/percpu.h>
#include <asm/processor-flags.h>
#include <asm/segment.h>
#include <asm/thread_info.h>
#include <asm/asm.h>
#include <asm/frame.h>
#include <xen/interface/xen.h>
#include <linux/init.h>
#include <linux/linkage.h>
/*
* Enable events. This clears the event mask and tests the pending
* event status with one and operation. If there are pending events,
* then enter the hypervisor to get them handled.
*/
SYM_FUNC_START(xen_irq_enable_direct)
FRAME_BEGIN
/* Unmask events */
movb $0, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
/*
* Preempt here doesn't matter because that will deal with any
* pending interrupts. The pending check may end up being run
* on the wrong CPU, but that doesn't hurt.
*/
/* Test for pending */
testb $0xff, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_pending
jz 1f
call check_events
1:
FRAME_END
ret
SYM_FUNC_END(xen_irq_enable_direct)
/*
* Disabling events is simply a matter of making the event mask
* non-zero.
*/
SYM_FUNC_START(xen_irq_disable_direct)
movb $1, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
ret
SYM_FUNC_END(xen_irq_disable_direct)
/*
* (xen_)save_fl is used to get the current interrupt enable status.
* Callers expect the status to be in X86_EFLAGS_IF, and other bits
* may be set in the return value. We take advantage of this by
* making sure that X86_EFLAGS_IF has the right value (and other bits
* in that byte are 0), but other bits in the return value are
* undefined. We need to toggle the state of the bit, because Xen and
* x86 use opposite senses (mask vs enable).
*/
SYM_FUNC_START(xen_save_fl_direct)
testb $0xff, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
setz %ah
addb %ah, %ah
ret
SYM_FUNC_END(xen_save_fl_direct)
/*
* In principle the caller should be passing us a value return from
* xen_save_fl_direct, but for robustness sake we test only the
* X86_EFLAGS_IF flag rather than the whole byte. After setting the
* interrupt mask state, it checks for unmasked pending events and
* enters the hypervisor to get them delivered if so.
*/
SYM_FUNC_START(xen_restore_fl_direct)
FRAME_BEGIN
testw $X86_EFLAGS_IF, %di
setz PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
/*
* Preempt here doesn't matter because that will deal with any
* pending interrupts. The pending check may end up being run
* on the wrong CPU, but that doesn't hurt.
*/
/* check for unmasked and pending */
cmpw $0x0001, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_pending
jnz 1f
call check_events
1:
FRAME_END
ret
SYM_FUNC_END(xen_restore_fl_direct)
/*
* Force an event check by making a hypercall, but preserve regs
* before making the call.
*/
SYM_FUNC_START(check_events)
FRAME_BEGIN
push %rax
push %rcx
push %rdx
push %rsi
push %rdi
push %r8
push %r9
push %r10
push %r11
call xen_force_evtchn_callback
pop %r11
pop %r10
pop %r9
pop %r8
pop %rdi
pop %rsi
pop %rdx
pop %rcx
pop %rax
FRAME_END
ret
SYM_FUNC_END(check_events)
SYM_FUNC_START(xen_read_cr2)
FRAME_BEGIN
_ASM_MOV PER_CPU_VAR(xen_vcpu), %_ASM_AX
_ASM_MOV XEN_vcpu_info_arch_cr2(%_ASM_AX), %_ASM_AX
FRAME_END
ret
SYM_FUNC_END(xen_read_cr2);
SYM_FUNC_START(xen_read_cr2_direct)
FRAME_BEGIN
_ASM_MOV PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_arch_cr2, %_ASM_AX
FRAME_END
ret
SYM_FUNC_END(xen_read_cr2_direct);
.macro xen_pv_trap name
SYM_CODE_START(xen_\name)
pop %rcx
pop %r11
jmp \name
SYM_CODE_END(xen_\name)
_ASM_NOKPROBE(xen_\name)
.endm
xen_pv_trap asm_exc_divide_error
xen_pv_trap asm_xenpv_exc_debug
xen_pv_trap asm_exc_int3
xen_pv_trap asm_xenpv_exc_nmi
xen_pv_trap asm_exc_overflow
xen_pv_trap asm_exc_bounds
xen_pv_trap asm_exc_invalid_op
xen_pv_trap asm_exc_device_not_available
xen_pv_trap asm_exc_double_fault
xen_pv_trap asm_exc_coproc_segment_overrun
xen_pv_trap asm_exc_invalid_tss
xen_pv_trap asm_exc_segment_not_present
xen_pv_trap asm_exc_stack_segment
xen_pv_trap asm_exc_general_protection
xen_pv_trap asm_exc_page_fault
xen_pv_trap asm_exc_spurious_interrupt_bug
xen_pv_trap asm_exc_coprocessor_error
xen_pv_trap asm_exc_alignment_check
#ifdef CONFIG_X86_MCE
xen_pv_trap asm_exc_machine_check
#endif /* CONFIG_X86_MCE */
xen_pv_trap asm_exc_simd_coprocessor_error
#ifdef CONFIG_IA32_EMULATION
xen_pv_trap entry_INT80_compat
#endif
xen_pv_trap asm_exc_xen_hypervisor_callback
__INIT
SYM_CODE_START(xen_early_idt_handler_array)
i = 0
.rept NUM_EXCEPTION_VECTORS
pop %rcx
pop %r11
jmp early_idt_handler_array + i*EARLY_IDT_HANDLER_SIZE
i = i + 1
.fill xen_early_idt_handler_array + i*XEN_EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc
.endr
SYM_CODE_END(xen_early_idt_handler_array)
__FINIT
hypercall_iret = hypercall_page + __HYPERVISOR_iret * 32
/*
* Xen64 iret frame:
*
* ss
* rsp
* rflags
* cs
* rip <-- standard iret frame
*
* flags
*
* rcx }
* r11 }<-- pushed by hypercall page
* rsp->rax }
*/
SYM_CODE_START(xen_iret)
pushq $0
jmp hypercall_iret
SYM_CODE_END(xen_iret)
SYM_CODE_START(xen_sysret64)
/*
* We're already on the usermode stack at this point, but
* still with the kernel gs, so we can easily switch back.
*
* tss.sp2 is scratch space.
*/
movq %rsp, PER_CPU_VAR(cpu_tss_rw + TSS_sp2)
movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp
pushq $__USER_DS
pushq PER_CPU_VAR(cpu_tss_rw + TSS_sp2)
pushq %r11
pushq $__USER_CS
pushq %rcx
pushq $VGCF_in_syscall
jmp hypercall_iret
SYM_CODE_END(xen_sysret64)
/*
* Xen handles syscall callbacks much like ordinary exceptions, which
* means we have:
* - kernel gs
* - kernel rsp
* - an iret-like stack frame on the stack (including rcx and r11):
* ss
* rsp
* rflags
* cs
* rip
* r11
* rsp->rcx
*/
/* Normal 64-bit system call target */
SYM_FUNC_START(xen_syscall_target)
popq %rcx
popq %r11
/*
* Neither Xen nor the kernel really knows what the old SS and
* CS were. The kernel expects __USER_DS and __USER_CS, so
* report those values even though Xen will guess its own values.
*/
movq $__USER_DS, 4*8(%rsp)
movq $__USER_CS, 1*8(%rsp)
jmp entry_SYSCALL_64_after_hwframe
SYM_FUNC_END(xen_syscall_target)
#ifdef CONFIG_IA32_EMULATION
/* 32-bit compat syscall target */
SYM_FUNC_START(xen_syscall32_target)
popq %rcx
popq %r11
/*
* Neither Xen nor the kernel really knows what the old SS and
* CS were. The kernel expects __USER32_DS and __USER32_CS, so
* report those values even though Xen will guess its own values.
*/
movq $__USER32_DS, 4*8(%rsp)
movq $__USER32_CS, 1*8(%rsp)
jmp entry_SYSCALL_compat_after_hwframe
SYM_FUNC_END(xen_syscall32_target)
/* 32-bit compat sysenter target */
SYM_FUNC_START(xen_sysenter_target)
/*
* NB: Xen is polite and clears TF from EFLAGS for us. This means
* that we don't need to guard against single step exceptions here.
*/
popq %rcx
popq %r11
/*
* Neither Xen nor the kernel really knows what the old SS and
* CS were. The kernel expects __USER32_DS and __USER32_CS, so
* report those values even though Xen will guess its own values.
*/
movq $__USER32_DS, 4*8(%rsp)
movq $__USER32_CS, 1*8(%rsp)
jmp entry_SYSENTER_compat_after_hwframe
SYM_FUNC_END(xen_sysenter_target)
#else /* !CONFIG_IA32_EMULATION */
SYM_FUNC_START_ALIAS(xen_syscall32_target)
SYM_FUNC_START(xen_sysenter_target)
lea 16(%rsp), %rsp /* strip %rcx, %r11 */
mov $-ENOSYS, %rax
pushq $0
jmp hypercall_iret
SYM_FUNC_END(xen_sysenter_target)
SYM_FUNC_END_ALIAS(xen_syscall32_target)
#endif /* CONFIG_IA32_EMULATION */