mirror of
https://github.com/torvalds/linux.git
synced 2024-12-26 04:42:12 +00:00
48cd6b38eb
In function check_fw_ready() we busy wait using udelay. The CPU is not released and we see need_resched failures. Busy waiting is not necessary since we are in process context and we can sleep instead. Replace udelay with msleep of 20 ms intervals while waiting for firmware to become ready. It has been verified that check_fw_ready is not being used in interrupt context anywhere, hence it is safe to make this change. Link: https://lore.kernel.org/r/20201102165528.26510-4-Viswas.G@microchip.com.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: akshatzen <akshatzen@google.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Radha Ramachandran <radha@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
1648 lines
49 KiB
C
1648 lines
49 KiB
C
/*
|
|
* PMC-Sierra SPCv/ve 8088/8089 SAS/SATA based host adapters driver
|
|
*
|
|
* Copyright (c) 2008-2009 USI Co., Ltd.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions, and the following disclaimer,
|
|
* without modification.
|
|
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
|
|
* substantially similar to the "NO WARRANTY" disclaimer below
|
|
* ("Disclaimer") and any redistribution must be conditioned upon
|
|
* including a substantially similar Disclaimer requirement for further
|
|
* binary redistribution.
|
|
* 3. Neither the names of the above-listed copyright holders nor the names
|
|
* of any contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* Alternatively, this software may be distributed under the terms of the
|
|
* GNU General Public License ("GPL") version 2 as published by the Free
|
|
* Software Foundation.
|
|
*
|
|
* NO WARRANTY
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
|
|
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGES.
|
|
*
|
|
*/
|
|
|
|
#ifndef _PMC8001_REG_H_
|
|
#define _PMC8001_REG_H_
|
|
|
|
#include <linux/types.h>
|
|
#include <scsi/libsas.h>
|
|
|
|
/* for Request Opcode of IOMB */
|
|
#define OPC_INB_ECHO 1 /* 0x000 */
|
|
#define OPC_INB_PHYSTART 4 /* 0x004 */
|
|
#define OPC_INB_PHYSTOP 5 /* 0x005 */
|
|
#define OPC_INB_SSPINIIOSTART 6 /* 0x006 */
|
|
#define OPC_INB_SSPINITMSTART 7 /* 0x007 */
|
|
/* 0x8 RESV IN SPCv */
|
|
#define OPC_INB_RSVD 8 /* 0x008 */
|
|
#define OPC_INB_DEV_HANDLE_ACCEPT 9 /* 0x009 */
|
|
#define OPC_INB_SSPTGTIOSTART 10 /* 0x00A */
|
|
#define OPC_INB_SSPTGTRSPSTART 11 /* 0x00B */
|
|
/* 0xC, 0xD, 0xE removed in SPCv */
|
|
#define OPC_INB_SSP_ABORT 15 /* 0x00F */
|
|
#define OPC_INB_DEREG_DEV_HANDLE 16 /* 0x010 */
|
|
#define OPC_INB_GET_DEV_HANDLE 17 /* 0x011 */
|
|
#define OPC_INB_SMP_REQUEST 18 /* 0x012 */
|
|
/* 0x13 SMP_RESPONSE is removed in SPCv */
|
|
#define OPC_INB_SMP_ABORT 20 /* 0x014 */
|
|
/* 0x16 RESV IN SPCv */
|
|
#define OPC_INB_RSVD1 22 /* 0x016 */
|
|
#define OPC_INB_SATA_HOST_OPSTART 23 /* 0x017 */
|
|
#define OPC_INB_SATA_ABORT 24 /* 0x018 */
|
|
#define OPC_INB_LOCAL_PHY_CONTROL 25 /* 0x019 */
|
|
/* 0x1A RESV IN SPCv */
|
|
#define OPC_INB_RSVD2 26 /* 0x01A */
|
|
#define OPC_INB_FW_FLASH_UPDATE 32 /* 0x020 */
|
|
#define OPC_INB_GPIO 34 /* 0x022 */
|
|
#define OPC_INB_SAS_DIAG_MODE_START_END 35 /* 0x023 */
|
|
#define OPC_INB_SAS_DIAG_EXECUTE 36 /* 0x024 */
|
|
/* 0x25 RESV IN SPCv */
|
|
#define OPC_INB_RSVD3 37 /* 0x025 */
|
|
#define OPC_INB_GET_TIME_STAMP 38 /* 0x026 */
|
|
#define OPC_INB_PORT_CONTROL 39 /* 0x027 */
|
|
#define OPC_INB_GET_NVMD_DATA 40 /* 0x028 */
|
|
#define OPC_INB_SET_NVMD_DATA 41 /* 0x029 */
|
|
#define OPC_INB_SET_DEVICE_STATE 42 /* 0x02A */
|
|
#define OPC_INB_GET_DEVICE_STATE 43 /* 0x02B */
|
|
#define OPC_INB_SET_DEV_INFO 44 /* 0x02C */
|
|
/* 0x2D RESV IN SPCv */
|
|
#define OPC_INB_RSVD4 45 /* 0x02D */
|
|
#define OPC_INB_SGPIO_REGISTER 46 /* 0x02E */
|
|
#define OPC_INB_PCIE_DIAG_EXEC 47 /* 0x02F */
|
|
#define OPC_INB_SET_CONTROLLER_CONFIG 48 /* 0x030 */
|
|
#define OPC_INB_GET_CONTROLLER_CONFIG 49 /* 0x031 */
|
|
#define OPC_INB_REG_DEV 50 /* 0x032 */
|
|
#define OPC_INB_SAS_HW_EVENT_ACK 51 /* 0x033 */
|
|
#define OPC_INB_GET_DEVICE_INFO 52 /* 0x034 */
|
|
#define OPC_INB_GET_PHY_PROFILE 53 /* 0x035 */
|
|
#define OPC_INB_FLASH_OP_EXT 54 /* 0x036 */
|
|
#define OPC_INB_SET_PHY_PROFILE 55 /* 0x037 */
|
|
#define OPC_INB_KEK_MANAGEMENT 256 /* 0x100 */
|
|
#define OPC_INB_DEK_MANAGEMENT 257 /* 0x101 */
|
|
#define OPC_INB_SSP_INI_DIF_ENC_IO 258 /* 0x102 */
|
|
#define OPC_INB_SATA_DIF_ENC_IO 259 /* 0x103 */
|
|
|
|
/* for Response Opcode of IOMB */
|
|
#define OPC_OUB_ECHO 1 /* 0x001 */
|
|
#define OPC_OUB_RSVD 4 /* 0x004 */
|
|
#define OPC_OUB_SSP_COMP 5 /* 0x005 */
|
|
#define OPC_OUB_SMP_COMP 6 /* 0x006 */
|
|
#define OPC_OUB_LOCAL_PHY_CNTRL 7 /* 0x007 */
|
|
#define OPC_OUB_RSVD1 10 /* 0x00A */
|
|
#define OPC_OUB_DEREG_DEV 11 /* 0x00B */
|
|
#define OPC_OUB_GET_DEV_HANDLE 12 /* 0x00C */
|
|
#define OPC_OUB_SATA_COMP 13 /* 0x00D */
|
|
#define OPC_OUB_SATA_EVENT 14 /* 0x00E */
|
|
#define OPC_OUB_SSP_EVENT 15 /* 0x00F */
|
|
#define OPC_OUB_RSVD2 16 /* 0x010 */
|
|
/* 0x11 - SMP_RECEIVED Notification removed in SPCv*/
|
|
#define OPC_OUB_SSP_RECV_EVENT 18 /* 0x012 */
|
|
#define OPC_OUB_RSVD3 19 /* 0x013 */
|
|
#define OPC_OUB_FW_FLASH_UPDATE 20 /* 0x014 */
|
|
#define OPC_OUB_GPIO_RESPONSE 22 /* 0x016 */
|
|
#define OPC_OUB_GPIO_EVENT 23 /* 0x017 */
|
|
#define OPC_OUB_GENERAL_EVENT 24 /* 0x018 */
|
|
#define OPC_OUB_SSP_ABORT_RSP 26 /* 0x01A */
|
|
#define OPC_OUB_SATA_ABORT_RSP 27 /* 0x01B */
|
|
#define OPC_OUB_SAS_DIAG_MODE_START_END 28 /* 0x01C */
|
|
#define OPC_OUB_SAS_DIAG_EXECUTE 29 /* 0x01D */
|
|
#define OPC_OUB_GET_TIME_STAMP 30 /* 0x01E */
|
|
#define OPC_OUB_RSVD4 31 /* 0x01F */
|
|
#define OPC_OUB_PORT_CONTROL 32 /* 0x020 */
|
|
#define OPC_OUB_SKIP_ENTRY 33 /* 0x021 */
|
|
#define OPC_OUB_SMP_ABORT_RSP 34 /* 0x022 */
|
|
#define OPC_OUB_GET_NVMD_DATA 35 /* 0x023 */
|
|
#define OPC_OUB_SET_NVMD_DATA 36 /* 0x024 */
|
|
#define OPC_OUB_DEVICE_HANDLE_REMOVAL 37 /* 0x025 */
|
|
#define OPC_OUB_SET_DEVICE_STATE 38 /* 0x026 */
|
|
#define OPC_OUB_GET_DEVICE_STATE 39 /* 0x027 */
|
|
#define OPC_OUB_SET_DEV_INFO 40 /* 0x028 */
|
|
#define OPC_OUB_RSVD5 41 /* 0x029 */
|
|
#define OPC_OUB_HW_EVENT 1792 /* 0x700 */
|
|
#define OPC_OUB_DEV_HANDLE_ARRIV 1824 /* 0x720 */
|
|
#define OPC_OUB_THERM_HW_EVENT 1840 /* 0x730 */
|
|
#define OPC_OUB_SGPIO_RESP 2094 /* 0x82E */
|
|
#define OPC_OUB_PCIE_DIAG_EXECUTE 2095 /* 0x82F */
|
|
#define OPC_OUB_DEV_REGIST 2098 /* 0x832 */
|
|
#define OPC_OUB_SAS_HW_EVENT_ACK 2099 /* 0x833 */
|
|
#define OPC_OUB_GET_DEVICE_INFO 2100 /* 0x834 */
|
|
/* spcv specific commands */
|
|
#define OPC_OUB_PHY_START_RESP 2052 /* 0x804 */
|
|
#define OPC_OUB_PHY_STOP_RESP 2053 /* 0x805 */
|
|
#define OPC_OUB_SET_CONTROLLER_CONFIG 2096 /* 0x830 */
|
|
#define OPC_OUB_GET_CONTROLLER_CONFIG 2097 /* 0x831 */
|
|
#define OPC_OUB_GET_PHY_PROFILE 2101 /* 0x835 */
|
|
#define OPC_OUB_FLASH_OP_EXT 2102 /* 0x836 */
|
|
#define OPC_OUB_SET_PHY_PROFILE 2103 /* 0x837 */
|
|
#define OPC_OUB_KEK_MANAGEMENT_RESP 2304 /* 0x900 */
|
|
#define OPC_OUB_DEK_MANAGEMENT_RESP 2305 /* 0x901 */
|
|
#define OPC_OUB_SSP_COALESCED_COMP_RESP 2306 /* 0x902 */
|
|
|
|
/* for phy start*/
|
|
#define SSC_DISABLE_15 (0x01 << 16)
|
|
#define SSC_DISABLE_30 (0x02 << 16)
|
|
#define SSC_DISABLE_60 (0x04 << 16)
|
|
#define SAS_ASE (0x01 << 15)
|
|
#define SPINHOLD_DISABLE (0x00 << 14)
|
|
#define SPINHOLD_ENABLE (0x01 << 14)
|
|
#define LINKMODE_SAS (0x01 << 12)
|
|
#define LINKMODE_DSATA (0x02 << 12)
|
|
#define LINKMODE_AUTO (0x03 << 12)
|
|
#define LINKRATE_15 (0x01 << 8)
|
|
#define LINKRATE_30 (0x02 << 8)
|
|
#define LINKRATE_60 (0x04 << 8)
|
|
#define LINKRATE_120 (0x08 << 8)
|
|
|
|
/*phy_stop*/
|
|
#define PHY_STOP_SUCCESS 0x00
|
|
#define PHY_STOP_ERR_DEVICE_ATTACHED 0x1046
|
|
|
|
/* phy_profile */
|
|
#define SAS_PHY_ANALOG_SETTINGS_PAGE 0x04
|
|
#define PHY_DWORD_LENGTH 0xC
|
|
|
|
/* Thermal related */
|
|
#define THERMAL_ENABLE 0x1
|
|
#define THERMAL_LOG_ENABLE 0x1
|
|
#define THERMAL_PAGE_CODE_7H 0x6
|
|
#define THERMAL_PAGE_CODE_8H 0x7
|
|
#define LTEMPHIL 70
|
|
#define RTEMPHIL 100
|
|
|
|
/* Encryption info */
|
|
#define SCRATCH_PAD3_ENC_DISABLED 0x00000000
|
|
#define SCRATCH_PAD3_ENC_DIS_ERR 0x00000001
|
|
#define SCRATCH_PAD3_ENC_ENA_ERR 0x00000002
|
|
#define SCRATCH_PAD3_ENC_READY 0x00000003
|
|
#define SCRATCH_PAD3_ENC_MASK SCRATCH_PAD3_ENC_READY
|
|
|
|
#define SCRATCH_PAD3_XTS_ENABLED (1 << 14)
|
|
#define SCRATCH_PAD3_SMA_ENABLED (1 << 4)
|
|
#define SCRATCH_PAD3_SMB_ENABLED (1 << 5)
|
|
#define SCRATCH_PAD3_SMF_ENABLED 0
|
|
#define SCRATCH_PAD3_SM_MASK 0x000000F0
|
|
#define SCRATCH_PAD3_ERR_CODE 0x00FF0000
|
|
|
|
#define SEC_MODE_SMF 0x0
|
|
#define SEC_MODE_SMA 0x100
|
|
#define SEC_MODE_SMB 0x200
|
|
#define CIPHER_MODE_ECB 0x00000001
|
|
#define CIPHER_MODE_XTS 0x00000002
|
|
#define KEK_MGMT_SUBOP_KEYCARDUPDATE 0x4
|
|
|
|
/* SAS protocol timer configuration page */
|
|
#define SAS_PROTOCOL_TIMER_CONFIG_PAGE 0x04
|
|
#define STP_MCT_TMO 32
|
|
#define SSP_MCT_TMO 32
|
|
#define SAS_MAX_OPEN_TIME 5
|
|
#define SMP_MAX_CONN_TIMER 0xFF
|
|
#define STP_FRM_TIMER 0
|
|
#define STP_IDLE_TIME 5 /* 5 us; controller default */
|
|
#define SAS_MFD 0
|
|
#define SAS_OPNRJT_RTRY_INTVL 2
|
|
#define SAS_DOPNRJT_RTRY_TMO 128
|
|
#define SAS_COPNRJT_RTRY_TMO 128
|
|
|
|
#define SPCV_DOORBELL_CLEAR_TIMEOUT (30 * 1000 * 1000) /* 30 sec */
|
|
#define SPC_DOORBELL_CLEAR_TIMEOUT (15 * 1000 * 1000) /* 15 sec */
|
|
|
|
/*
|
|
Making ORR bigger than IT NEXUS LOSS which is 2000000us = 2 second.
|
|
Assuming a bigger value 3 second, 3000000/128 = 23437.5 where 128
|
|
is DOPNRJT_RTRY_TMO
|
|
*/
|
|
#define SAS_DOPNRJT_RTRY_THR 23438
|
|
#define SAS_COPNRJT_RTRY_THR 23438
|
|
#define SAS_MAX_AIP 0x200000
|
|
#define IT_NEXUS_TIMEOUT 0x7D0
|
|
#define PORT_RECOVERY_TIMEOUT ((IT_NEXUS_TIMEOUT/100) + 30)
|
|
/* Port recovery timeout, 10000 ms for PM8006 controller */
|
|
#define CHIP_8006_PORT_RECOVERY_TIMEOUT 0x640000
|
|
|
|
#ifdef __LITTLE_ENDIAN_BITFIELD
|
|
struct sas_identify_frame_local {
|
|
/* Byte 0 */
|
|
u8 frame_type:4;
|
|
u8 dev_type:3;
|
|
u8 _un0:1;
|
|
|
|
/* Byte 1 */
|
|
u8 _un1;
|
|
|
|
/* Byte 2 */
|
|
union {
|
|
struct {
|
|
u8 _un20:1;
|
|
u8 smp_iport:1;
|
|
u8 stp_iport:1;
|
|
u8 ssp_iport:1;
|
|
u8 _un247:4;
|
|
};
|
|
u8 initiator_bits;
|
|
};
|
|
|
|
/* Byte 3 */
|
|
union {
|
|
struct {
|
|
u8 _un30:1;
|
|
u8 smp_tport:1;
|
|
u8 stp_tport:1;
|
|
u8 ssp_tport:1;
|
|
u8 _un347:4;
|
|
};
|
|
u8 target_bits;
|
|
};
|
|
|
|
/* Byte 4 - 11 */
|
|
u8 _un4_11[8];
|
|
|
|
/* Byte 12 - 19 */
|
|
u8 sas_addr[SAS_ADDR_SIZE];
|
|
|
|
/* Byte 20 */
|
|
u8 phy_id;
|
|
|
|
u8 _un21_27[7];
|
|
|
|
} __packed;
|
|
|
|
#elif defined(__BIG_ENDIAN_BITFIELD)
|
|
struct sas_identify_frame_local {
|
|
/* Byte 0 */
|
|
u8 _un0:1;
|
|
u8 dev_type:3;
|
|
u8 frame_type:4;
|
|
|
|
/* Byte 1 */
|
|
u8 _un1;
|
|
|
|
/* Byte 2 */
|
|
union {
|
|
struct {
|
|
u8 _un247:4;
|
|
u8 ssp_iport:1;
|
|
u8 stp_iport:1;
|
|
u8 smp_iport:1;
|
|
u8 _un20:1;
|
|
};
|
|
u8 initiator_bits;
|
|
};
|
|
|
|
/* Byte 3 */
|
|
union {
|
|
struct {
|
|
u8 _un347:4;
|
|
u8 ssp_tport:1;
|
|
u8 stp_tport:1;
|
|
u8 smp_tport:1;
|
|
u8 _un30:1;
|
|
};
|
|
u8 target_bits;
|
|
};
|
|
|
|
/* Byte 4 - 11 */
|
|
u8 _un4_11[8];
|
|
|
|
/* Byte 12 - 19 */
|
|
u8 sas_addr[SAS_ADDR_SIZE];
|
|
|
|
/* Byte 20 */
|
|
u8 phy_id;
|
|
|
|
u8 _un21_27[7];
|
|
} __packed;
|
|
#else
|
|
#error "Bitfield order not defined!"
|
|
#endif
|
|
|
|
struct mpi_msg_hdr {
|
|
__le32 header; /* Bits [11:0] - Message operation code */
|
|
/* Bits [15:12] - Message Category */
|
|
/* Bits [21:16] - Outboundqueue ID for the
|
|
operation completion message */
|
|
/* Bits [23:22] - Reserved */
|
|
/* Bits [28:24] - Buffer Count, indicates how
|
|
many buffer are allocated for the massage */
|
|
/* Bits [30:29] - Reserved */
|
|
/* Bits [31] - Message Valid bit */
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/*
|
|
* brief the data structure of PHY Start Command
|
|
* use to describe enable the phy (128 bytes)
|
|
*/
|
|
struct phy_start_req {
|
|
__le32 tag;
|
|
__le32 ase_sh_lm_slr_phyid;
|
|
struct sas_identify_frame_local sas_identify; /* 28 Bytes */
|
|
__le32 spasti;
|
|
u32 reserved[21];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/*
|
|
* brief the data structure of PHY Start Command
|
|
* use to disable the phy (128 bytes)
|
|
*/
|
|
struct phy_stop_req {
|
|
__le32 tag;
|
|
__le32 phy_id;
|
|
u32 reserved[29];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/* set device bits fis - device to host */
|
|
struct set_dev_bits_fis {
|
|
u8 fis_type; /* 0xA1*/
|
|
u8 n_i_pmport;
|
|
/* b7 : n Bit. Notification bit. If set device needs attention. */
|
|
/* b6 : i Bit. Interrupt Bit */
|
|
/* b5-b4: reserved2 */
|
|
/* b3-b0: PM Port */
|
|
u8 status;
|
|
u8 error;
|
|
u32 _r_a;
|
|
} __attribute__ ((packed));
|
|
/* PIO setup FIS - device to host */
|
|
struct pio_setup_fis {
|
|
u8 fis_type; /* 0x5f */
|
|
u8 i_d_pmPort;
|
|
/* b7 : reserved */
|
|
/* b6 : i bit. Interrupt bit */
|
|
/* b5 : d bit. data transfer direction. set to 1 for device to host
|
|
xfer */
|
|
/* b4 : reserved */
|
|
/* b3-b0: PM Port */
|
|
u8 status;
|
|
u8 error;
|
|
u8 lbal;
|
|
u8 lbam;
|
|
u8 lbah;
|
|
u8 device;
|
|
u8 lbal_exp;
|
|
u8 lbam_exp;
|
|
u8 lbah_exp;
|
|
u8 _r_a;
|
|
u8 sector_count;
|
|
u8 sector_count_exp;
|
|
u8 _r_b;
|
|
u8 e_status;
|
|
u8 _r_c[2];
|
|
u8 transfer_count;
|
|
} __attribute__ ((packed));
|
|
|
|
/*
|
|
* brief the data structure of SATA Completion Response
|
|
* use to describe the sata task response (64 bytes)
|
|
*/
|
|
struct sata_completion_resp {
|
|
__le32 tag;
|
|
__le32 status;
|
|
__le32 param;
|
|
u32 sata_resp[12];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/*
|
|
* brief the data structure of SAS HW Event Notification
|
|
* use to alert the host about the hardware event(64 bytes)
|
|
*/
|
|
/* updated outbound struct for spcv */
|
|
|
|
struct hw_event_resp {
|
|
__le32 lr_status_evt_portid;
|
|
__le32 evt_param;
|
|
__le32 phyid_npip_portstate;
|
|
struct sas_identify_frame sas_identify;
|
|
struct dev_to_host_fis sata_fis;
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/*
|
|
* brief the data structure for thermal event notification
|
|
*/
|
|
|
|
struct thermal_hw_event {
|
|
__le32 thermal_event;
|
|
__le32 rht_lht;
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/*
|
|
* brief the data structure of REGISTER DEVICE Command
|
|
* use to describe MPI REGISTER DEVICE Command (64 bytes)
|
|
*/
|
|
|
|
struct reg_dev_req {
|
|
__le32 tag;
|
|
__le32 phyid_portid;
|
|
__le32 dtype_dlr_mcn_ir_retry;
|
|
__le32 firstburstsize_ITNexustimeout;
|
|
u8 sas_addr[SAS_ADDR_SIZE];
|
|
__le32 upper_device_id;
|
|
u32 reserved[24];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/*
|
|
* brief the data structure of DEREGISTER DEVICE Command
|
|
* use to request spc to remove all internal resources associated
|
|
* with the device id (64 bytes)
|
|
*/
|
|
|
|
struct dereg_dev_req {
|
|
__le32 tag;
|
|
__le32 device_id;
|
|
u32 reserved[29];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/*
|
|
* brief the data structure of DEVICE_REGISTRATION Response
|
|
* use to notify the completion of the device registration (64 bytes)
|
|
*/
|
|
struct dev_reg_resp {
|
|
__le32 tag;
|
|
__le32 status;
|
|
__le32 device_id;
|
|
u32 reserved[12];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/*
|
|
* brief the data structure of Local PHY Control Command
|
|
* use to issue PHY CONTROL to local phy (64 bytes)
|
|
*/
|
|
struct local_phy_ctl_req {
|
|
__le32 tag;
|
|
__le32 phyop_phyid;
|
|
u32 reserved1[29];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/**
|
|
* brief the data structure of Local Phy Control Response
|
|
* use to describe MPI Local Phy Control Response (64 bytes)
|
|
*/
|
|
struct local_phy_ctl_resp {
|
|
__le32 tag;
|
|
__le32 phyop_phyid;
|
|
__le32 status;
|
|
u32 reserved[12];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
#define OP_BITS 0x0000FF00
|
|
#define ID_BITS 0x000000FF
|
|
|
|
/*
|
|
* brief the data structure of PORT Control Command
|
|
* use to control port properties (64 bytes)
|
|
*/
|
|
|
|
struct port_ctl_req {
|
|
__le32 tag;
|
|
__le32 portop_portid;
|
|
__le32 param0;
|
|
__le32 param1;
|
|
u32 reserved1[27];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/*
|
|
* brief the data structure of HW Event Ack Command
|
|
* use to acknowledge receive HW event (64 bytes)
|
|
*/
|
|
struct hw_event_ack_req {
|
|
__le32 tag;
|
|
__le32 phyid_sea_portid;
|
|
__le32 param0;
|
|
__le32 param1;
|
|
u32 reserved1[27];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/*
|
|
* brief the data structure of PHY_START Response Command
|
|
* indicates the completion of PHY_START command (64 bytes)
|
|
*/
|
|
struct phy_start_resp {
|
|
__le32 tag;
|
|
__le32 status;
|
|
__le32 phyid;
|
|
u32 reserved[12];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/*
|
|
* brief the data structure of PHY_STOP Response Command
|
|
* indicates the completion of PHY_STOP command (64 bytes)
|
|
*/
|
|
struct phy_stop_resp {
|
|
__le32 tag;
|
|
__le32 status;
|
|
__le32 phyid;
|
|
u32 reserved[12];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/*
|
|
* brief the data structure of SSP Completion Response
|
|
* use to indicate a SSP Completion (n bytes)
|
|
*/
|
|
struct ssp_completion_resp {
|
|
__le32 tag;
|
|
__le32 status;
|
|
__le32 param;
|
|
__le32 ssptag_rescv_rescpad;
|
|
struct ssp_response_iu ssp_resp_iu;
|
|
__le32 residual_count;
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
#define SSP_RESCV_BIT 0x00010000
|
|
|
|
/*
|
|
* brief the data structure of SATA EVNET response
|
|
* use to indicate a SATA Completion (64 bytes)
|
|
*/
|
|
struct sata_event_resp {
|
|
__le32 tag;
|
|
__le32 event;
|
|
__le32 port_id;
|
|
__le32 device_id;
|
|
u32 reserved;
|
|
__le32 event_param0;
|
|
__le32 event_param1;
|
|
__le32 sata_addr_h32;
|
|
__le32 sata_addr_l32;
|
|
__le32 e_udt1_udt0_crc;
|
|
__le32 e_udt5_udt4_udt3_udt2;
|
|
__le32 a_udt1_udt0_crc;
|
|
__le32 a_udt5_udt4_udt3_udt2;
|
|
__le32 hwdevid_diferr;
|
|
__le32 err_framelen_byteoffset;
|
|
__le32 err_dataframe;
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/*
|
|
* brief the data structure of SSP EVNET esponse
|
|
* use to indicate a SSP Completion (64 bytes)
|
|
*/
|
|
struct ssp_event_resp {
|
|
__le32 tag;
|
|
__le32 event;
|
|
__le32 port_id;
|
|
__le32 device_id;
|
|
__le32 ssp_tag;
|
|
__le32 event_param0;
|
|
__le32 event_param1;
|
|
__le32 sas_addr_h32;
|
|
__le32 sas_addr_l32;
|
|
__le32 e_udt1_udt0_crc;
|
|
__le32 e_udt5_udt4_udt3_udt2;
|
|
__le32 a_udt1_udt0_crc;
|
|
__le32 a_udt5_udt4_udt3_udt2;
|
|
__le32 hwdevid_diferr;
|
|
__le32 err_framelen_byteoffset;
|
|
__le32 err_dataframe;
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/**
|
|
* brief the data structure of General Event Notification Response
|
|
* use to describe MPI General Event Notification Response (64 bytes)
|
|
*/
|
|
struct general_event_resp {
|
|
__le32 status;
|
|
__le32 inb_IOMB_payload[14];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
#define GENERAL_EVENT_PAYLOAD 14
|
|
#define OPCODE_BITS 0x00000fff
|
|
|
|
/*
|
|
* brief the data structure of SMP Request Command
|
|
* use to describe MPI SMP REQUEST Command (64 bytes)
|
|
*/
|
|
struct smp_req {
|
|
__le32 tag;
|
|
__le32 device_id;
|
|
__le32 len_ip_ir;
|
|
/* Bits [0] - Indirect response */
|
|
/* Bits [1] - Indirect Payload */
|
|
/* Bits [15:2] - Reserved */
|
|
/* Bits [23:16] - direct payload Len */
|
|
/* Bits [31:24] - Reserved */
|
|
u8 smp_req16[16];
|
|
union {
|
|
u8 smp_req[32];
|
|
struct {
|
|
__le64 long_req_addr;/* sg dma address, LE */
|
|
__le32 long_req_size;/* LE */
|
|
u32 _r_a;
|
|
__le64 long_resp_addr;/* sg dma address, LE */
|
|
__le32 long_resp_size;/* LE */
|
|
u32 _r_b;
|
|
} long_smp_req;/* sequencer extension */
|
|
};
|
|
__le32 rsvd[16];
|
|
} __attribute__((packed, aligned(4)));
|
|
/*
|
|
* brief the data structure of SMP Completion Response
|
|
* use to describe MPI SMP Completion Response (64 bytes)
|
|
*/
|
|
struct smp_completion_resp {
|
|
__le32 tag;
|
|
__le32 status;
|
|
__le32 param;
|
|
u8 _r_a[252];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/*
|
|
*brief the data structure of SSP SMP SATA Abort Command
|
|
* use to describe MPI SSP SMP & SATA Abort Command (64 bytes)
|
|
*/
|
|
struct task_abort_req {
|
|
__le32 tag;
|
|
__le32 device_id;
|
|
__le32 tag_to_abort;
|
|
__le32 abort_all;
|
|
u32 reserved[27];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/* These flags used for SSP SMP & SATA Abort */
|
|
#define ABORT_MASK 0x3
|
|
#define ABORT_SINGLE 0x0
|
|
#define ABORT_ALL 0x1
|
|
|
|
/**
|
|
* brief the data structure of SSP SATA SMP Abort Response
|
|
* use to describe SSP SMP & SATA Abort Response ( 64 bytes)
|
|
*/
|
|
struct task_abort_resp {
|
|
__le32 tag;
|
|
__le32 status;
|
|
__le32 scp;
|
|
u32 reserved[12];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/**
|
|
* brief the data structure of SAS Diagnostic Start/End Command
|
|
* use to describe MPI SAS Diagnostic Start/End Command (64 bytes)
|
|
*/
|
|
struct sas_diag_start_end_req {
|
|
__le32 tag;
|
|
__le32 operation_phyid;
|
|
u32 reserved[29];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/**
|
|
* brief the data structure of SAS Diagnostic Execute Command
|
|
* use to describe MPI SAS Diagnostic Execute Command (64 bytes)
|
|
*/
|
|
struct sas_diag_execute_req {
|
|
__le32 tag;
|
|
__le32 cmdtype_cmddesc_phyid;
|
|
__le32 pat1_pat2;
|
|
__le32 threshold;
|
|
__le32 codepat_errmsk;
|
|
__le32 pmon;
|
|
__le32 pERF1CTL;
|
|
u32 reserved[24];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
#define SAS_DIAG_PARAM_BYTES 24
|
|
|
|
/*
|
|
* brief the data structure of Set Device State Command
|
|
* use to describe MPI Set Device State Command (64 bytes)
|
|
*/
|
|
struct set_dev_state_req {
|
|
__le32 tag;
|
|
__le32 device_id;
|
|
__le32 nds;
|
|
u32 reserved[28];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/*
|
|
* brief the data structure of SATA Start Command
|
|
* use to describe MPI SATA IO Start Command (64 bytes)
|
|
* Note: This structure is common for normal / encryption I/O
|
|
*/
|
|
|
|
struct sata_start_req {
|
|
__le32 tag;
|
|
__le32 device_id;
|
|
__le32 data_len;
|
|
__le32 ncqtag_atap_dir_m_dad;
|
|
struct host_to_dev_fis sata_fis;
|
|
u32 reserved1;
|
|
u32 reserved2; /* dword 11. rsvd for normal I/O. */
|
|
/* EPLE Descl for enc I/O */
|
|
u32 addr_low; /* dword 12. rsvd for enc I/O */
|
|
u32 addr_high; /* dword 13. reserved for enc I/O */
|
|
__le32 len; /* dword 14: length for normal I/O. */
|
|
/* EPLE Desch for enc I/O */
|
|
__le32 esgl; /* dword 15. rsvd for enc I/O */
|
|
__le32 atapi_scsi_cdb[4]; /* dword 16-19. rsvd for enc I/O */
|
|
/* The below fields are reserved for normal I/O */
|
|
__le32 key_index_mode; /* dword 20 */
|
|
__le32 sector_cnt_enss;/* dword 21 */
|
|
__le32 keytagl; /* dword 22 */
|
|
__le32 keytagh; /* dword 23 */
|
|
__le32 twk_val0; /* dword 24 */
|
|
__le32 twk_val1; /* dword 25 */
|
|
__le32 twk_val2; /* dword 26 */
|
|
__le32 twk_val3; /* dword 27 */
|
|
__le32 enc_addr_low; /* dword 28. Encryption SGL address high */
|
|
__le32 enc_addr_high; /* dword 29. Encryption SGL address low */
|
|
__le32 enc_len; /* dword 30. Encryption length */
|
|
__le32 enc_esgl; /* dword 31. Encryption esgl bit */
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/**
|
|
* brief the data structure of SSP INI TM Start Command
|
|
* use to describe MPI SSP INI TM Start Command (64 bytes)
|
|
*/
|
|
struct ssp_ini_tm_start_req {
|
|
__le32 tag;
|
|
__le32 device_id;
|
|
__le32 relate_tag;
|
|
__le32 tmf;
|
|
u8 lun[8];
|
|
__le32 ds_ads_m;
|
|
u32 reserved[24];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
struct ssp_info_unit {
|
|
u8 lun[8];/* SCSI Logical Unit Number */
|
|
u8 reserved1;/* reserved */
|
|
u8 efb_prio_attr;
|
|
/* B7 : enabledFirstBurst */
|
|
/* B6-3 : taskPriority */
|
|
/* B2-0 : taskAttribute */
|
|
u8 reserved2; /* reserved */
|
|
u8 additional_cdb_len;
|
|
/* B7-2 : additional_cdb_len */
|
|
/* B1-0 : reserved */
|
|
u8 cdb[16];/* The SCSI CDB up to 16 bytes length */
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/**
|
|
* brief the data structure of SSP INI IO Start Command
|
|
* use to describe MPI SSP INI IO Start Command (64 bytes)
|
|
* Note: This structure is common for normal / encryption I/O
|
|
*/
|
|
struct ssp_ini_io_start_req {
|
|
__le32 tag;
|
|
__le32 device_id;
|
|
__le32 data_len;
|
|
__le32 dad_dir_m_tlr;
|
|
struct ssp_info_unit ssp_iu;
|
|
__le32 addr_low; /* dword 12: sgl low for normal I/O. */
|
|
/* epl_descl for encryption I/O */
|
|
__le32 addr_high; /* dword 13: sgl hi for normal I/O */
|
|
/* dpl_descl for encryption I/O */
|
|
__le32 len; /* dword 14: len for normal I/O. */
|
|
/* edpl_desch for encryption I/O */
|
|
__le32 esgl; /* dword 15: ESGL bit for normal I/O. */
|
|
/* user defined tag mask for enc I/O */
|
|
/* The below fields are reserved for normal I/O */
|
|
u8 udt[12]; /* dword 16-18 */
|
|
__le32 sectcnt_ios; /* dword 19 */
|
|
__le32 key_cmode; /* dword 20 */
|
|
__le32 ks_enss; /* dword 21 */
|
|
__le32 keytagl; /* dword 22 */
|
|
__le32 keytagh; /* dword 23 */
|
|
__le32 twk_val0; /* dword 24 */
|
|
__le32 twk_val1; /* dword 25 */
|
|
__le32 twk_val2; /* dword 26 */
|
|
__le32 twk_val3; /* dword 27 */
|
|
__le32 enc_addr_low; /* dword 28: Encryption sgl addr low */
|
|
__le32 enc_addr_high; /* dword 29: Encryption sgl addr hi */
|
|
__le32 enc_len; /* dword 30: Encryption length */
|
|
__le32 enc_esgl; /* dword 31: ESGL bit for encryption */
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/**
|
|
* brief the data structure for SSP_INI_DIF_ENC_IO COMMAND
|
|
* use to initiate SSP I/O operation with optional DIF/ENC
|
|
*/
|
|
struct ssp_dif_enc_io_req {
|
|
__le32 tag;
|
|
__le32 device_id;
|
|
__le32 data_len;
|
|
__le32 dirMTlr;
|
|
__le32 sspiu0;
|
|
__le32 sspiu1;
|
|
__le32 sspiu2;
|
|
__le32 sspiu3;
|
|
__le32 sspiu4;
|
|
__le32 sspiu5;
|
|
__le32 sspiu6;
|
|
__le32 epl_des;
|
|
__le32 dpl_desl_ndplr;
|
|
__le32 dpl_desh;
|
|
__le32 uum_uuv_bss_difbits;
|
|
u8 udt[12];
|
|
__le32 sectcnt_ios;
|
|
__le32 key_cmode;
|
|
__le32 ks_enss;
|
|
__le32 keytagl;
|
|
__le32 keytagh;
|
|
__le32 twk_val0;
|
|
__le32 twk_val1;
|
|
__le32 twk_val2;
|
|
__le32 twk_val3;
|
|
__le32 addr_low;
|
|
__le32 addr_high;
|
|
__le32 len;
|
|
__le32 esgl;
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/**
|
|
* brief the data structure of Firmware download
|
|
* use to describe MPI FW DOWNLOAD Command (64 bytes)
|
|
*/
|
|
struct fw_flash_Update_req {
|
|
__le32 tag;
|
|
__le32 cur_image_offset;
|
|
__le32 cur_image_len;
|
|
__le32 total_image_len;
|
|
u32 reserved0[7];
|
|
__le32 sgl_addr_lo;
|
|
__le32 sgl_addr_hi;
|
|
__le32 len;
|
|
__le32 ext_reserved;
|
|
u32 reserved1[16];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
#define FWFLASH_IOMB_RESERVED_LEN 0x07
|
|
/**
|
|
* brief the data structure of FW_FLASH_UPDATE Response
|
|
* use to describe MPI FW_FLASH_UPDATE Response (64 bytes)
|
|
*
|
|
*/
|
|
struct fw_flash_Update_resp {
|
|
__le32 tag;
|
|
__le32 status;
|
|
u32 reserved[13];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/**
|
|
* brief the data structure of Get NVM Data Command
|
|
* use to get data from NVM in HBA(64 bytes)
|
|
*/
|
|
struct get_nvm_data_req {
|
|
__le32 tag;
|
|
__le32 len_ir_vpdd;
|
|
__le32 vpd_offset;
|
|
u32 reserved[8];
|
|
__le32 resp_addr_lo;
|
|
__le32 resp_addr_hi;
|
|
__le32 resp_len;
|
|
u32 reserved1[17];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
struct set_nvm_data_req {
|
|
__le32 tag;
|
|
__le32 len_ir_vpdd;
|
|
__le32 vpd_offset;
|
|
u32 reserved[8];
|
|
__le32 resp_addr_lo;
|
|
__le32 resp_addr_hi;
|
|
__le32 resp_len;
|
|
u32 reserved1[17];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/**
|
|
* brief the data structure for SET CONTROLLER CONFIG COMMAND
|
|
* use to modify controller configuration
|
|
*/
|
|
struct set_ctrl_cfg_req {
|
|
__le32 tag;
|
|
__le32 cfg_pg[14];
|
|
u32 reserved[16];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/**
|
|
* brief the data structure for GET CONTROLLER CONFIG COMMAND
|
|
* use to get controller configuration page
|
|
*/
|
|
struct get_ctrl_cfg_req {
|
|
__le32 tag;
|
|
__le32 pgcd;
|
|
__le32 int_vec;
|
|
u32 reserved[28];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/**
|
|
* brief the data structure for KEK_MANAGEMENT COMMAND
|
|
* use for KEK management
|
|
*/
|
|
struct kek_mgmt_req {
|
|
__le32 tag;
|
|
__le32 new_curidx_ksop;
|
|
u32 reserved;
|
|
__le32 kblob[12];
|
|
u32 reserved1[16];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/**
|
|
* brief the data structure for DEK_MANAGEMENT COMMAND
|
|
* use for DEK management
|
|
*/
|
|
struct dek_mgmt_req {
|
|
__le32 tag;
|
|
__le32 kidx_dsop;
|
|
__le32 dekidx;
|
|
__le32 addr_l;
|
|
__le32 addr_h;
|
|
__le32 nent;
|
|
__le32 dbf_tblsize;
|
|
u32 reserved[24];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/**
|
|
* brief the data structure for SET PHY PROFILE COMMAND
|
|
* use to retrive phy specific information
|
|
*/
|
|
struct set_phy_profile_req {
|
|
__le32 tag;
|
|
__le32 ppc_phyid;
|
|
u32 reserved[29];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/**
|
|
* brief the data structure for GET PHY PROFILE COMMAND
|
|
* use to retrive phy specific information
|
|
*/
|
|
struct get_phy_profile_req {
|
|
__le32 tag;
|
|
__le32 ppc_phyid;
|
|
__le32 profile[29];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/**
|
|
* brief the data structure for EXT FLASH PARTITION
|
|
* use to manage ext flash partition
|
|
*/
|
|
struct ext_flash_partition_req {
|
|
__le32 tag;
|
|
__le32 cmd;
|
|
__le32 offset;
|
|
__le32 len;
|
|
u32 reserved[7];
|
|
__le32 addr_low;
|
|
__le32 addr_high;
|
|
__le32 len1;
|
|
__le32 ext;
|
|
u32 reserved1[16];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
#define TWI_DEVICE 0x0
|
|
#define C_SEEPROM 0x1
|
|
#define VPD_FLASH 0x4
|
|
#define AAP1_RDUMP 0x5
|
|
#define IOP_RDUMP 0x6
|
|
#define EXPAN_ROM 0x7
|
|
|
|
#define IPMode 0x80000000
|
|
#define NVMD_TYPE 0x0000000F
|
|
#define NVMD_STAT 0x0000FFFF
|
|
#define NVMD_LEN 0xFF000000
|
|
/**
|
|
* brief the data structure of Get NVMD Data Response
|
|
* use to describe MPI Get NVMD Data Response (64 bytes)
|
|
*/
|
|
struct get_nvm_data_resp {
|
|
__le32 tag;
|
|
__le32 ir_tda_bn_dps_das_nvm;
|
|
__le32 dlen_status;
|
|
__le32 nvm_data[12];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/**
|
|
* brief the data structure of SAS Diagnostic Start/End Response
|
|
* use to describe MPI SAS Diagnostic Start/End Response (64 bytes)
|
|
*
|
|
*/
|
|
struct sas_diag_start_end_resp {
|
|
__le32 tag;
|
|
__le32 status;
|
|
u32 reserved[13];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/**
|
|
* brief the data structure of SAS Diagnostic Execute Response
|
|
* use to describe MPI SAS Diagnostic Execute Response (64 bytes)
|
|
*
|
|
*/
|
|
struct sas_diag_execute_resp {
|
|
__le32 tag;
|
|
__le32 cmdtype_cmddesc_phyid;
|
|
__le32 Status;
|
|
__le32 ReportData;
|
|
u32 reserved[11];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/**
|
|
* brief the data structure of Set Device State Response
|
|
* use to describe MPI Set Device State Response (64 bytes)
|
|
*
|
|
*/
|
|
struct set_dev_state_resp {
|
|
__le32 tag;
|
|
__le32 status;
|
|
__le32 device_id;
|
|
__le32 pds_nds;
|
|
u32 reserved[11];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/* new outbound structure for spcv - begins */
|
|
/**
|
|
* brief the data structure for SET CONTROLLER CONFIG COMMAND
|
|
* use to modify controller configuration
|
|
*/
|
|
struct set_ctrl_cfg_resp {
|
|
__le32 tag;
|
|
__le32 status;
|
|
__le32 err_qlfr_pgcd;
|
|
u32 reserved[12];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
struct get_ctrl_cfg_resp {
|
|
__le32 tag;
|
|
__le32 status;
|
|
__le32 err_qlfr;
|
|
__le32 confg_page[12];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
struct kek_mgmt_resp {
|
|
__le32 tag;
|
|
__le32 status;
|
|
__le32 kidx_new_curr_ksop;
|
|
__le32 err_qlfr;
|
|
u32 reserved[11];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
struct dek_mgmt_resp {
|
|
__le32 tag;
|
|
__le32 status;
|
|
__le32 kekidx_tbls_dsop;
|
|
__le32 dekidx;
|
|
__le32 err_qlfr;
|
|
u32 reserved[10];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
struct get_phy_profile_resp {
|
|
__le32 tag;
|
|
__le32 status;
|
|
__le32 ppc_phyid;
|
|
__le32 ppc_specific_rsp[12];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
struct flash_op_ext_resp {
|
|
__le32 tag;
|
|
__le32 cmd;
|
|
__le32 status;
|
|
__le32 epart_size;
|
|
__le32 epart_sect_size;
|
|
u32 reserved[10];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
struct set_phy_profile_resp {
|
|
__le32 tag;
|
|
__le32 status;
|
|
__le32 ppc_phyid;
|
|
__le32 ppc_specific_rsp[12];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
struct ssp_coalesced_comp_resp {
|
|
__le32 coal_cnt;
|
|
__le32 tag0;
|
|
__le32 ssp_tag0;
|
|
__le32 tag1;
|
|
__le32 ssp_tag1;
|
|
__le32 add_tag_ssp_tag[10];
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
/* new outbound structure for spcv - ends */
|
|
|
|
/* brief data structure for SAS protocol timer configuration page.
|
|
*
|
|
*/
|
|
struct SASProtocolTimerConfig {
|
|
__le32 pageCode; /* 0 */
|
|
__le32 MST_MSI; /* 1 */
|
|
__le32 STP_SSP_MCT_TMO; /* 2 */
|
|
__le32 STP_FRM_TMO; /* 3 */
|
|
__le32 STP_IDLE_TMO; /* 4 */
|
|
__le32 OPNRJT_RTRY_INTVL; /* 5 */
|
|
__le32 Data_Cmd_OPNRJT_RTRY_TMO; /* 6 */
|
|
__le32 Data_Cmd_OPNRJT_RTRY_THR; /* 7 */
|
|
__le32 MAX_AIP; /* 8 */
|
|
} __attribute__((packed, aligned(4)));
|
|
|
|
typedef struct SASProtocolTimerConfig SASProtocolTimerConfig_t;
|
|
|
|
#define NDS_BITS 0x0F
|
|
#define PDS_BITS 0xF0
|
|
|
|
/*
|
|
* HW Events type
|
|
*/
|
|
|
|
#define HW_EVENT_RESET_START 0x01
|
|
#define HW_EVENT_CHIP_RESET_COMPLETE 0x02
|
|
#define HW_EVENT_PHY_STOP_STATUS 0x03
|
|
#define HW_EVENT_SAS_PHY_UP 0x04
|
|
#define HW_EVENT_SATA_PHY_UP 0x05
|
|
#define HW_EVENT_SATA_SPINUP_HOLD 0x06
|
|
#define HW_EVENT_PHY_DOWN 0x07
|
|
#define HW_EVENT_PORT_INVALID 0x08
|
|
#define HW_EVENT_BROADCAST_CHANGE 0x09
|
|
#define HW_EVENT_PHY_ERROR 0x0A
|
|
#define HW_EVENT_BROADCAST_SES 0x0B
|
|
#define HW_EVENT_INBOUND_CRC_ERROR 0x0C
|
|
#define HW_EVENT_HARD_RESET_RECEIVED 0x0D
|
|
#define HW_EVENT_MALFUNCTION 0x0E
|
|
#define HW_EVENT_ID_FRAME_TIMEOUT 0x0F
|
|
#define HW_EVENT_BROADCAST_EXP 0x10
|
|
#define HW_EVENT_PHY_START_STATUS 0x11
|
|
#define HW_EVENT_LINK_ERR_INVALID_DWORD 0x12
|
|
#define HW_EVENT_LINK_ERR_DISPARITY_ERROR 0x13
|
|
#define HW_EVENT_LINK_ERR_CODE_VIOLATION 0x14
|
|
#define HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH 0x15
|
|
#define HW_EVENT_LINK_ERR_PHY_RESET_FAILED 0x16
|
|
#define HW_EVENT_PORT_RECOVERY_TIMER_TMO 0x17
|
|
#define HW_EVENT_PORT_RECOVER 0x18
|
|
#define HW_EVENT_PORT_RESET_TIMER_TMO 0x19
|
|
#define HW_EVENT_PORT_RESET_COMPLETE 0x20
|
|
#define EVENT_BROADCAST_ASYNCH_EVENT 0x21
|
|
|
|
/* port state */
|
|
#define PORT_NOT_ESTABLISHED 0x00
|
|
#define PORT_VALID 0x01
|
|
#define PORT_LOSTCOMM 0x02
|
|
#define PORT_IN_RESET 0x04
|
|
#define PORT_3RD_PARTY_RESET 0x07
|
|
#define PORT_INVALID 0x08
|
|
|
|
/*
|
|
* SSP/SMP/SATA IO Completion Status values
|
|
*/
|
|
|
|
#define IO_SUCCESS 0x00
|
|
#define IO_ABORTED 0x01
|
|
#define IO_OVERFLOW 0x02
|
|
#define IO_UNDERFLOW 0x03
|
|
#define IO_FAILED 0x04
|
|
#define IO_ABORT_RESET 0x05
|
|
#define IO_NOT_VALID 0x06
|
|
#define IO_NO_DEVICE 0x07
|
|
#define IO_ILLEGAL_PARAMETER 0x08
|
|
#define IO_LINK_FAILURE 0x09
|
|
#define IO_PROG_ERROR 0x0A
|
|
|
|
#define IO_EDC_IN_ERROR 0x0B
|
|
#define IO_EDC_OUT_ERROR 0x0C
|
|
#define IO_ERROR_HW_TIMEOUT 0x0D
|
|
#define IO_XFER_ERROR_BREAK 0x0E
|
|
#define IO_XFER_ERROR_PHY_NOT_READY 0x0F
|
|
#define IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED 0x10
|
|
#define IO_OPEN_CNX_ERROR_ZONE_VIOLATION 0x11
|
|
#define IO_OPEN_CNX_ERROR_BREAK 0x12
|
|
#define IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS 0x13
|
|
#define IO_OPEN_CNX_ERROR_BAD_DESTINATION 0x14
|
|
#define IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED 0x15
|
|
#define IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY 0x16
|
|
#define IO_OPEN_CNX_ERROR_WRONG_DESTINATION 0x17
|
|
/* This error code 0x18 is not used on SPCv */
|
|
#define IO_OPEN_CNX_ERROR_UNKNOWN_ERROR 0x18
|
|
#define IO_XFER_ERROR_NAK_RECEIVED 0x19
|
|
#define IO_XFER_ERROR_ACK_NAK_TIMEOUT 0x1A
|
|
#define IO_XFER_ERROR_PEER_ABORTED 0x1B
|
|
#define IO_XFER_ERROR_RX_FRAME 0x1C
|
|
#define IO_XFER_ERROR_DMA 0x1D
|
|
#define IO_XFER_ERROR_CREDIT_TIMEOUT 0x1E
|
|
#define IO_XFER_ERROR_SATA_LINK_TIMEOUT 0x1F
|
|
#define IO_XFER_ERROR_SATA 0x20
|
|
|
|
/* This error code 0x22 is not used on SPCv */
|
|
#define IO_XFER_ERROR_ABORTED_DUE_TO_SRST 0x22
|
|
#define IO_XFER_ERROR_REJECTED_NCQ_MODE 0x21
|
|
#define IO_XFER_ERROR_ABORTED_NCQ_MODE 0x23
|
|
#define IO_XFER_OPEN_RETRY_TIMEOUT 0x24
|
|
/* This error code 0x25 is not used on SPCv */
|
|
#define IO_XFER_SMP_RESP_CONNECTION_ERROR 0x25
|
|
#define IO_XFER_ERROR_UNEXPECTED_PHASE 0x26
|
|
#define IO_XFER_ERROR_XFER_RDY_OVERRUN 0x27
|
|
#define IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED 0x28
|
|
#define IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT 0x30
|
|
|
|
/* The following error code 0x31 and 0x32 are not using (obsolete) */
|
|
#define IO_XFER_ERROR_CMD_ISSUE_BREAK_BEFORE_ACK_NAK 0x31
|
|
#define IO_XFER_ERROR_CMD_ISSUE_PHY_DOWN_BEFORE_ACK_NAK 0x32
|
|
|
|
#define IO_XFER_ERROR_OFFSET_MISMATCH 0x34
|
|
#define IO_XFER_ERROR_XFER_ZERO_DATA_LEN 0x35
|
|
#define IO_XFER_CMD_FRAME_ISSUED 0x36
|
|
#define IO_ERROR_INTERNAL_SMP_RESOURCE 0x37
|
|
#define IO_PORT_IN_RESET 0x38
|
|
#define IO_DS_NON_OPERATIONAL 0x39
|
|
#define IO_DS_IN_RECOVERY 0x3A
|
|
#define IO_TM_TAG_NOT_FOUND 0x3B
|
|
#define IO_XFER_PIO_SETUP_ERROR 0x3C
|
|
#define IO_SSP_EXT_IU_ZERO_LEN_ERROR 0x3D
|
|
#define IO_DS_IN_ERROR 0x3E
|
|
#define IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY 0x3F
|
|
#define IO_ABORT_IN_PROGRESS 0x40
|
|
#define IO_ABORT_DELAYED 0x41
|
|
#define IO_INVALID_LENGTH 0x42
|
|
|
|
/********** additional response event values *****************/
|
|
|
|
#define IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY_ALT 0x43
|
|
#define IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED 0x44
|
|
#define IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO 0x45
|
|
#define IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST 0x46
|
|
#define IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE 0x47
|
|
#define IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED 0x48
|
|
#define IO_DS_INVALID 0x49
|
|
/* WARNING: the value is not contiguous from here */
|
|
#define IO_XFER_ERR_LAST_PIO_DATAIN_CRC_ERR 0x52
|
|
#define IO_XFER_DMA_ACTIVATE_TIMEOUT 0x53
|
|
#define IO_XFER_ERROR_INTERNAL_CRC_ERROR 0x54
|
|
#define MPI_IO_RQE_BUSY_FULL 0x55
|
|
#define IO_XFER_ERR_EOB_DATA_OVERRUN 0x56
|
|
#define IO_XFER_ERROR_INVALID_SSP_RSP_FRAME 0x57
|
|
#define IO_OPEN_CNX_ERROR_OPEN_PREEMPTED 0x58
|
|
|
|
#define MPI_ERR_IO_RESOURCE_UNAVAILABLE 0x1004
|
|
#define MPI_ERR_ATAPI_DEVICE_BUSY 0x1024
|
|
|
|
#define IO_XFR_ERROR_DEK_KEY_CACHE_MISS 0x2040
|
|
/*
|
|
* An encryption IO request failed due to DEK Key Tag mismatch.
|
|
* The key tag supplied in the encryption IOMB does not match with
|
|
* the Key Tag in the referenced DEK Entry.
|
|
*/
|
|
#define IO_XFR_ERROR_DEK_KEY_TAG_MISMATCH 0x2041
|
|
#define IO_XFR_ERROR_CIPHER_MODE_INVALID 0x2042
|
|
/*
|
|
* An encryption I/O request failed because the initial value (IV)
|
|
* in the unwrapped DEK blob didn't match the IV used to unwrap it.
|
|
*/
|
|
#define IO_XFR_ERROR_DEK_IV_MISMATCH 0x2043
|
|
/* An encryption I/O request failed due to an internal RAM ECC or
|
|
* interface error while unwrapping the DEK. */
|
|
#define IO_XFR_ERROR_DEK_RAM_INTERFACE_ERROR 0x2044
|
|
/* An encryption I/O request failed due to an internal RAM ECC or
|
|
* interface error while unwrapping the DEK. */
|
|
#define IO_XFR_ERROR_INTERNAL_RAM 0x2045
|
|
/*
|
|
* An encryption I/O request failed
|
|
* because the DEK index specified in the I/O was outside the bounds of
|
|
* the total number of entries in the host DEK table.
|
|
*/
|
|
#define IO_XFR_ERROR_DEK_INDEX_OUT_OF_BOUNDS0x2046
|
|
|
|
/* define DIF IO response error status code */
|
|
#define IO_XFR_ERROR_DIF_MISMATCH 0x3000
|
|
#define IO_XFR_ERROR_DIF_APPLICATION_TAG_MISMATCH 0x3001
|
|
#define IO_XFR_ERROR_DIF_REFERENCE_TAG_MISMATCH 0x3002
|
|
#define IO_XFR_ERROR_DIF_CRC_MISMATCH 0x3003
|
|
|
|
/* define operator management response status and error qualifier code */
|
|
#define OPR_MGMT_OP_NOT_SUPPORTED 0x2060
|
|
#define OPR_MGMT_MPI_ENC_ERR_OPR_PARAM_ILLEGAL 0x2061
|
|
#define OPR_MGMT_MPI_ENC_ERR_OPR_ID_NOT_FOUND 0x2062
|
|
#define OPR_MGMT_MPI_ENC_ERR_OPR_ROLE_NOT_MATCH 0x2063
|
|
#define OPR_MGMT_MPI_ENC_ERR_OPR_MAX_NUM_EXCEEDED 0x2064
|
|
#define OPR_MGMT_MPI_ENC_ERR_KEK_UNWRAP_FAIL 0x2022
|
|
#define OPR_MGMT_MPI_ENC_ERR_NVRAM_OPERATION_FAILURE 0x2023
|
|
/***************** additional response event values ***************/
|
|
|
|
/* WARNING: This error code must always be the last number.
|
|
* If you add error code, modify this code also
|
|
* It is used as an index
|
|
*/
|
|
#define IO_ERROR_UNKNOWN_GENERIC 0x2023
|
|
|
|
/* MSGU CONFIGURATION TABLE*/
|
|
|
|
#define SPCv_MSGU_CFG_TABLE_UPDATE 0x001
|
|
#define SPCv_MSGU_CFG_TABLE_RESET 0x002
|
|
#define SPCv_MSGU_CFG_TABLE_FREEZE 0x004
|
|
#define SPCv_MSGU_CFG_TABLE_UNFREEZE 0x008
|
|
#define MSGU_IBDB_SET 0x00
|
|
#define MSGU_HOST_INT_STATUS 0x08
|
|
#define MSGU_HOST_INT_MASK 0x0C
|
|
#define MSGU_IOPIB_INT_STATUS 0x18
|
|
#define MSGU_IOPIB_INT_MASK 0x1C
|
|
#define MSGU_IBDB_CLEAR 0x20
|
|
|
|
#define MSGU_MSGU_CONTROL 0x24
|
|
#define MSGU_ODR 0x20
|
|
#define MSGU_ODCR 0x28
|
|
|
|
#define MSGU_ODMR 0x30
|
|
#define MSGU_ODMR_U 0x34
|
|
#define MSGU_ODMR_CLR 0x38
|
|
#define MSGU_ODMR_CLR_U 0x3C
|
|
#define MSGU_OD_RSVD 0x40
|
|
|
|
#define MSGU_SCRATCH_PAD_0 0x44
|
|
#define MSGU_SCRATCH_PAD_1 0x48
|
|
#define MSGU_SCRATCH_PAD_2 0x4C
|
|
#define MSGU_SCRATCH_PAD_3 0x50
|
|
#define MSGU_HOST_SCRATCH_PAD_0 0x54
|
|
#define MSGU_HOST_SCRATCH_PAD_1 0x58
|
|
#define MSGU_HOST_SCRATCH_PAD_2 0x5C
|
|
#define MSGU_HOST_SCRATCH_PAD_3 0x60
|
|
#define MSGU_HOST_SCRATCH_PAD_4 0x64
|
|
#define MSGU_HOST_SCRATCH_PAD_5 0x68
|
|
#define MSGU_HOST_SCRATCH_PAD_6 0x6C
|
|
#define MSGU_HOST_SCRATCH_PAD_7 0x70
|
|
|
|
/* bit definition for ODMR register */
|
|
#define ODMR_MASK_ALL 0xFFFFFFFF/* mask all
|
|
interrupt vector */
|
|
#define ODMR_CLEAR_ALL 0 /* clear all
|
|
interrupt vector */
|
|
/* bit definition for ODCR register */
|
|
#define ODCR_CLEAR_ALL 0xFFFFFFFF /* mask all
|
|
interrupt vector*/
|
|
/* MSIX Interupts */
|
|
#define MSIX_TABLE_OFFSET 0x2000
|
|
#define MSIX_TABLE_ELEMENT_SIZE 0x10
|
|
#define MSIX_INTERRUPT_CONTROL_OFFSET 0xC
|
|
#define MSIX_TABLE_BASE (MSIX_TABLE_OFFSET + \
|
|
MSIX_INTERRUPT_CONTROL_OFFSET)
|
|
#define MSIX_INTERRUPT_DISABLE 0x1
|
|
#define MSIX_INTERRUPT_ENABLE 0x0
|
|
|
|
/* state definition for Scratch Pad1 register */
|
|
#define SCRATCH_PAD_RAAE_READY 0x3
|
|
#define SCRATCH_PAD_ILA_READY 0xC
|
|
#define SCRATCH_PAD_BOOT_LOAD_SUCCESS 0x0
|
|
#define SCRATCH_PAD_IOP0_READY 0xC00
|
|
#define SCRATCH_PAD_IOP1_READY 0x3000
|
|
#define SCRATCH_PAD_MIPSALL_READY (SCRATCH_PAD_IOP1_READY | \
|
|
SCRATCH_PAD_IOP0_READY | \
|
|
SCRATCH_PAD_RAAE_READY)
|
|
|
|
/* boot loader state */
|
|
#define SCRATCH_PAD1_BOOTSTATE_MASK 0x70 /* Bit 4-6 */
|
|
#define SCRATCH_PAD1_BOOTSTATE_SUCESS 0x0 /* Load successful */
|
|
#define SCRATCH_PAD1_BOOTSTATE_HDA_SEEPROM 0x10 /* HDA SEEPROM */
|
|
#define SCRATCH_PAD1_BOOTSTATE_HDA_BOOTSTRAP 0x20 /* HDA BootStrap Pins */
|
|
#define SCRATCH_PAD1_BOOTSTATE_HDA_SOFTRESET 0x30 /* HDA Soft Reset */
|
|
#define SCRATCH_PAD1_BOOTSTATE_CRIT_ERROR 0x40 /* HDA critical error */
|
|
#define SCRATCH_PAD1_BOOTSTATE_R1 0x50 /* Reserved */
|
|
#define SCRATCH_PAD1_BOOTSTATE_R2 0x60 /* Reserved */
|
|
#define SCRATCH_PAD1_BOOTSTATE_FATAL 0x70 /* Fatal Error */
|
|
|
|
/* state definition for Scratch Pad2 register */
|
|
#define SCRATCH_PAD2_POR 0x00 /* power on state */
|
|
#define SCRATCH_PAD2_SFR 0x01 /* soft reset state */
|
|
#define SCRATCH_PAD2_ERR 0x02 /* error state */
|
|
#define SCRATCH_PAD2_RDY 0x03 /* ready state */
|
|
#define SCRATCH_PAD2_FWRDY_RST 0x04 /* FW rdy for soft reset flag */
|
|
#define SCRATCH_PAD2_IOPRDY_RST 0x08 /* IOP ready for soft reset */
|
|
#define SCRATCH_PAD2_STATE_MASK 0xFFFFFFF4 /* ScratchPad 2
|
|
Mask, bit1-0 State */
|
|
#define SCRATCH_PAD2_RESERVED 0x000003FC/* Scratch Pad1
|
|
Reserved bit 2 to 9 */
|
|
|
|
#define SCRATCH_PAD_ERROR_MASK 0xFFFFFC00 /* Error mask bits */
|
|
#define SCRATCH_PAD_STATE_MASK 0x00000003 /* State Mask bits */
|
|
|
|
/* main configuration offset - byte offset */
|
|
#define MAIN_SIGNATURE_OFFSET 0x00 /* DWORD 0x00 */
|
|
#define MAIN_INTERFACE_REVISION 0x04 /* DWORD 0x01 */
|
|
#define MAIN_FW_REVISION 0x08 /* DWORD 0x02 */
|
|
#define MAIN_MAX_OUTSTANDING_IO_OFFSET 0x0C /* DWORD 0x03 */
|
|
#define MAIN_MAX_SGL_OFFSET 0x10 /* DWORD 0x04 */
|
|
#define MAIN_CNTRL_CAP_OFFSET 0x14 /* DWORD 0x05 */
|
|
#define MAIN_GST_OFFSET 0x18 /* DWORD 0x06 */
|
|
#define MAIN_IBQ_OFFSET 0x1C /* DWORD 0x07 */
|
|
#define MAIN_OBQ_OFFSET 0x20 /* DWORD 0x08 */
|
|
#define MAIN_IQNPPD_HPPD_OFFSET 0x24 /* DWORD 0x09 */
|
|
|
|
/* 0x28 - 0x4C - RSVD */
|
|
#define MAIN_EVENT_CRC_CHECK 0x48 /* DWORD 0x12 */
|
|
#define MAIN_EVENT_LOG_ADDR_HI 0x50 /* DWORD 0x14 */
|
|
#define MAIN_EVENT_LOG_ADDR_LO 0x54 /* DWORD 0x15 */
|
|
#define MAIN_EVENT_LOG_BUFF_SIZE 0x58 /* DWORD 0x16 */
|
|
#define MAIN_EVENT_LOG_OPTION 0x5C /* DWORD 0x17 */
|
|
#define MAIN_PCS_EVENT_LOG_ADDR_HI 0x60 /* DWORD 0x18 */
|
|
#define MAIN_PCS_EVENT_LOG_ADDR_LO 0x64 /* DWORD 0x19 */
|
|
#define MAIN_PCS_EVENT_LOG_BUFF_SIZE 0x68 /* DWORD 0x1A */
|
|
#define MAIN_PCS_EVENT_LOG_OPTION 0x6C /* DWORD 0x1B */
|
|
#define MAIN_FATAL_ERROR_INTERRUPT 0x70 /* DWORD 0x1C */
|
|
#define MAIN_FATAL_ERROR_RDUMP0_OFFSET 0x74 /* DWORD 0x1D */
|
|
#define MAIN_FATAL_ERROR_RDUMP0_LENGTH 0x78 /* DWORD 0x1E */
|
|
#define MAIN_FATAL_ERROR_RDUMP1_OFFSET 0x7C /* DWORD 0x1F */
|
|
#define MAIN_FATAL_ERROR_RDUMP1_LENGTH 0x80 /* DWORD 0x20 */
|
|
#define MAIN_GPIO_LED_FLAGS_OFFSET 0x84 /* DWORD 0x21 */
|
|
#define MAIN_ANALOG_SETUP_OFFSET 0x88 /* DWORD 0x22 */
|
|
|
|
#define MAIN_INT_VECTOR_TABLE_OFFSET 0x8C /* DWORD 0x23 */
|
|
#define MAIN_SAS_PHY_ATTR_TABLE_OFFSET 0x90 /* DWORD 0x24 */
|
|
#define MAIN_PORT_RECOVERY_TIMER 0x94 /* DWORD 0x25 */
|
|
#define MAIN_INT_REASSERTION_DELAY 0x98 /* DWORD 0x26 */
|
|
#define MAIN_MPI_ILA_RELEASE_TYPE 0xA4 /* DWORD 0x29 */
|
|
#define MAIN_MPI_INACTIVE_FW_VERSION 0XB0 /* DWORD 0x2C */
|
|
|
|
/* Gereral Status Table offset - byte offset */
|
|
#define GST_GSTLEN_MPIS_OFFSET 0x00
|
|
#define GST_IQ_FREEZE_STATE0_OFFSET 0x04
|
|
#define GST_IQ_FREEZE_STATE1_OFFSET 0x08
|
|
#define GST_MSGUTCNT_OFFSET 0x0C
|
|
#define GST_IOPTCNT_OFFSET 0x10
|
|
/* 0x14 - 0x34 - RSVD */
|
|
#define GST_GPIO_INPUT_VAL 0x38
|
|
/* 0x3c - 0x40 - RSVD */
|
|
#define GST_RERRINFO_OFFSET0 0x44
|
|
#define GST_RERRINFO_OFFSET1 0x48
|
|
#define GST_RERRINFO_OFFSET2 0x4c
|
|
#define GST_RERRINFO_OFFSET3 0x50
|
|
#define GST_RERRINFO_OFFSET4 0x54
|
|
#define GST_RERRINFO_OFFSET5 0x58
|
|
#define GST_RERRINFO_OFFSET6 0x5c
|
|
#define GST_RERRINFO_OFFSET7 0x60
|
|
|
|
/* General Status Table - MPI state */
|
|
#define GST_MPI_STATE_UNINIT 0x00
|
|
#define GST_MPI_STATE_INIT 0x01
|
|
#define GST_MPI_STATE_TERMINATION 0x02
|
|
#define GST_MPI_STATE_ERROR 0x03
|
|
#define GST_MPI_STATE_MASK 0x07
|
|
|
|
/* Per SAS PHY Attributes */
|
|
|
|
#define PSPA_PHYSTATE0_OFFSET 0x00 /* Dword V */
|
|
#define PSPA_OB_HW_EVENT_PID0_OFFSET 0x04 /* DWORD V+1 */
|
|
#define PSPA_PHYSTATE1_OFFSET 0x08 /* Dword V+2 */
|
|
#define PSPA_OB_HW_EVENT_PID1_OFFSET 0x0C /* DWORD V+3 */
|
|
#define PSPA_PHYSTATE2_OFFSET 0x10 /* Dword V+4 */
|
|
#define PSPA_OB_HW_EVENT_PID2_OFFSET 0x14 /* DWORD V+5 */
|
|
#define PSPA_PHYSTATE3_OFFSET 0x18 /* Dword V+6 */
|
|
#define PSPA_OB_HW_EVENT_PID3_OFFSET 0x1C /* DWORD V+7 */
|
|
#define PSPA_PHYSTATE4_OFFSET 0x20 /* Dword V+8 */
|
|
#define PSPA_OB_HW_EVENT_PID4_OFFSET 0x24 /* DWORD V+9 */
|
|
#define PSPA_PHYSTATE5_OFFSET 0x28 /* Dword V+10 */
|
|
#define PSPA_OB_HW_EVENT_PID5_OFFSET 0x2C /* DWORD V+11 */
|
|
#define PSPA_PHYSTATE6_OFFSET 0x30 /* Dword V+12 */
|
|
#define PSPA_OB_HW_EVENT_PID6_OFFSET 0x34 /* DWORD V+13 */
|
|
#define PSPA_PHYSTATE7_OFFSET 0x38 /* Dword V+14 */
|
|
#define PSPA_OB_HW_EVENT_PID7_OFFSET 0x3C /* DWORD V+15 */
|
|
#define PSPA_PHYSTATE8_OFFSET 0x40 /* DWORD V+16 */
|
|
#define PSPA_OB_HW_EVENT_PID8_OFFSET 0x44 /* DWORD V+17 */
|
|
#define PSPA_PHYSTATE9_OFFSET 0x48 /* DWORD V+18 */
|
|
#define PSPA_OB_HW_EVENT_PID9_OFFSET 0x4C /* DWORD V+19 */
|
|
#define PSPA_PHYSTATE10_OFFSET 0x50 /* DWORD V+20 */
|
|
#define PSPA_OB_HW_EVENT_PID10_OFFSET 0x54 /* DWORD V+21 */
|
|
#define PSPA_PHYSTATE11_OFFSET 0x58 /* DWORD V+22 */
|
|
#define PSPA_OB_HW_EVENT_PID11_OFFSET 0x5C /* DWORD V+23 */
|
|
#define PSPA_PHYSTATE12_OFFSET 0x60 /* DWORD V+24 */
|
|
#define PSPA_OB_HW_EVENT_PID12_OFFSET 0x64 /* DWORD V+25 */
|
|
#define PSPA_PHYSTATE13_OFFSET 0x68 /* DWORD V+26 */
|
|
#define PSPA_OB_HW_EVENT_PID13_OFFSET 0x6c /* DWORD V+27 */
|
|
#define PSPA_PHYSTATE14_OFFSET 0x70 /* DWORD V+28 */
|
|
#define PSPA_OB_HW_EVENT_PID14_OFFSET 0x74 /* DWORD V+29 */
|
|
#define PSPA_PHYSTATE15_OFFSET 0x78 /* DWORD V+30 */
|
|
#define PSPA_OB_HW_EVENT_PID15_OFFSET 0x7c /* DWORD V+31 */
|
|
/* end PSPA */
|
|
|
|
/* inbound queue configuration offset - byte offset */
|
|
#define IB_PROPERITY_OFFSET 0x00
|
|
#define IB_BASE_ADDR_HI_OFFSET 0x04
|
|
#define IB_BASE_ADDR_LO_OFFSET 0x08
|
|
#define IB_CI_BASE_ADDR_HI_OFFSET 0x0C
|
|
#define IB_CI_BASE_ADDR_LO_OFFSET 0x10
|
|
#define IB_PIPCI_BAR 0x14
|
|
#define IB_PIPCI_BAR_OFFSET 0x18
|
|
#define IB_RESERVED_OFFSET 0x1C
|
|
|
|
/* outbound queue configuration offset - byte offset */
|
|
#define OB_PROPERITY_OFFSET 0x00
|
|
#define OB_BASE_ADDR_HI_OFFSET 0x04
|
|
#define OB_BASE_ADDR_LO_OFFSET 0x08
|
|
#define OB_PI_BASE_ADDR_HI_OFFSET 0x0C
|
|
#define OB_PI_BASE_ADDR_LO_OFFSET 0x10
|
|
#define OB_CIPCI_BAR 0x14
|
|
#define OB_CIPCI_BAR_OFFSET 0x18
|
|
#define OB_INTERRUPT_COALES_OFFSET 0x1C
|
|
#define OB_DYNAMIC_COALES_OFFSET 0x20
|
|
#define OB_PROPERTY_INT_ENABLE 0x40000000
|
|
|
|
#define MBIC_NMI_ENABLE_VPE0_IOP 0x000418
|
|
#define MBIC_NMI_ENABLE_VPE0_AAP1 0x000418
|
|
/* PCIE registers - BAR2(0x18), BAR1(win) 0x010000 */
|
|
#define PCIE_EVENT_INTERRUPT_ENABLE 0x003040
|
|
#define PCIE_EVENT_INTERRUPT 0x003044
|
|
#define PCIE_ERROR_INTERRUPT_ENABLE 0x003048
|
|
#define PCIE_ERROR_INTERRUPT 0x00304C
|
|
|
|
/* SPCV soft reset */
|
|
#define SPC_REG_SOFT_RESET 0x00001000
|
|
#define SPCv_NORMAL_RESET_VALUE 0x1
|
|
|
|
#define SPCv_SOFT_RESET_READ_MASK 0xC0
|
|
#define SPCv_SOFT_RESET_NO_RESET 0x0
|
|
#define SPCv_SOFT_RESET_NORMAL_RESET_OCCURED 0x40
|
|
#define SPCv_SOFT_RESET_HDA_MODE_OCCURED 0x80
|
|
#define SPCv_SOFT_RESET_CHIP_RESET_OCCURED 0xC0
|
|
|
|
/* signature definition for host scratch pad0 register */
|
|
#define SPC_SOFT_RESET_SIGNATURE 0x252acbcd
|
|
/* Signature for Soft Reset */
|
|
|
|
/* SPC Reset register - BAR4(0x20), BAR2(win) (need dynamic mapping) */
|
|
#define SPC_REG_RESET 0x000000/* reset register */
|
|
|
|
/* bit definition for SPC_RESET register */
|
|
#define SPC_REG_RESET_OSSP 0x00000001
|
|
#define SPC_REG_RESET_RAAE 0x00000002
|
|
#define SPC_REG_RESET_PCS_SPBC 0x00000004
|
|
#define SPC_REG_RESET_PCS_IOP_SS 0x00000008
|
|
#define SPC_REG_RESET_PCS_AAP1_SS 0x00000010
|
|
#define SPC_REG_RESET_PCS_AAP2_SS 0x00000020
|
|
#define SPC_REG_RESET_PCS_LM 0x00000040
|
|
#define SPC_REG_RESET_PCS 0x00000080
|
|
#define SPC_REG_RESET_GSM 0x00000100
|
|
#define SPC_REG_RESET_DDR2 0x00010000
|
|
#define SPC_REG_RESET_BDMA_CORE 0x00020000
|
|
#define SPC_REG_RESET_BDMA_SXCBI 0x00040000
|
|
#define SPC_REG_RESET_PCIE_AL_SXCBI 0x00080000
|
|
#define SPC_REG_RESET_PCIE_PWR 0x00100000
|
|
#define SPC_REG_RESET_PCIE_SFT 0x00200000
|
|
#define SPC_REG_RESET_PCS_SXCBI 0x00400000
|
|
#define SPC_REG_RESET_LMS_SXCBI 0x00800000
|
|
#define SPC_REG_RESET_PMIC_SXCBI 0x01000000
|
|
#define SPC_REG_RESET_PMIC_CORE 0x02000000
|
|
#define SPC_REG_RESET_PCIE_PC_SXCBI 0x04000000
|
|
#define SPC_REG_RESET_DEVICE 0x80000000
|
|
|
|
/* registers for BAR Shifting - BAR2(0x18), BAR1(win) */
|
|
#define SPCV_IBW_AXI_TRANSLATION_LOW 0x001010
|
|
|
|
#define MBIC_AAP1_ADDR_BASE 0x060000
|
|
#define MBIC_IOP_ADDR_BASE 0x070000
|
|
#define GSM_ADDR_BASE 0x0700000
|
|
/* Dynamic map through Bar4 - 0x00700000 */
|
|
#define GSM_CONFIG_RESET 0x00000000
|
|
#define RAM_ECC_DB_ERR 0x00000018
|
|
#define GSM_READ_ADDR_PARITY_INDIC 0x00000058
|
|
#define GSM_WRITE_ADDR_PARITY_INDIC 0x00000060
|
|
#define GSM_WRITE_DATA_PARITY_INDIC 0x00000068
|
|
#define GSM_READ_ADDR_PARITY_CHECK 0x00000038
|
|
#define GSM_WRITE_ADDR_PARITY_CHECK 0x00000040
|
|
#define GSM_WRITE_DATA_PARITY_CHECK 0x00000048
|
|
|
|
#define RB6_ACCESS_REG 0x6A0000
|
|
#define HDAC_EXEC_CMD 0x0002
|
|
#define HDA_C_PA 0xcb
|
|
#define HDA_SEQ_ID_BITS 0x00ff0000
|
|
#define HDA_GSM_OFFSET_BITS 0x00FFFFFF
|
|
#define HDA_GSM_CMD_OFFSET_BITS 0x42C0
|
|
#define HDA_GSM_RSP_OFFSET_BITS 0x42E0
|
|
|
|
#define MBIC_AAP1_ADDR_BASE 0x060000
|
|
#define MBIC_IOP_ADDR_BASE 0x070000
|
|
#define GSM_ADDR_BASE 0x0700000
|
|
#define SPC_TOP_LEVEL_ADDR_BASE 0x000000
|
|
#define GSM_CONFIG_RESET_VALUE 0x00003b00
|
|
#define GPIO_ADDR_BASE 0x00090000
|
|
#define GPIO_GPIO_0_0UTPUT_CTL_OFFSET 0x0000010c
|
|
|
|
/* RB6 offset */
|
|
#define SPC_RB6_OFFSET 0x80C0
|
|
/* Magic number of soft reset for RB6 */
|
|
#define RB6_MAGIC_NUMBER_RST 0x1234
|
|
|
|
/* Device Register status */
|
|
#define DEVREG_SUCCESS 0x00
|
|
#define DEVREG_FAILURE_OUT_OF_RESOURCE 0x01
|
|
#define DEVREG_FAILURE_DEVICE_ALREADY_REGISTERED 0x02
|
|
#define DEVREG_FAILURE_INVALID_PHY_ID 0x03
|
|
#define DEVREG_FAILURE_PHY_ID_ALREADY_REGISTERED 0x04
|
|
#define DEVREG_FAILURE_PORT_ID_OUT_OF_RANGE 0x05
|
|
#define DEVREG_FAILURE_PORT_NOT_VALID_STATE 0x06
|
|
#define DEVREG_FAILURE_DEVICE_TYPE_NOT_VALID 0x07
|
|
|
|
|
|
#define MEMBASE_II_SHIFT_REGISTER 0x1010
|
|
#endif
|
|
|
|
/**
|
|
* As we know sleep (1~20) ms may result in sleep longer than ~20 ms, hence we
|
|
* choose 20 ms interval.
|
|
*/
|
|
#define FW_READY_INTERVAL 20
|