linux/drivers/media/dvb-frontends/bsru6.h
Mauro Carvalho Chehab 991ce92f8d [media] use https://linuxtv.org for LinuxTV URLs
While https was always supported on linuxtv.org, only in
Dec 3 2015 the website is using valid certificates.

As we're planning to drop pure http support on some
future, change all references at the media subsystem
to point to the https URL instead.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-12-04 10:38:59 -02:00

144 lines
3.8 KiB
C

/*
* bsru6.h - ALPS BSRU6 tuner support (moved from budget-ci.c)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
* Or, point your browser to http://www.gnu.org/copyleft/gpl.html
*
*
* the project's page is at https://linuxtv.org
*/
#ifndef BSRU6_H
#define BSRU6_H
static u8 alps_bsru6_inittab[] = {
0x01, 0x15,
0x02, 0x30,
0x03, 0x00,
0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */
0x06, 0x40, /* DAC not used, set to high impendance mode */
0x07, 0x00, /* DAC LSB */
0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */
0x09, 0x00, /* FIFO */
0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */
0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */
0x10, 0x3f, // AGC2 0x3d
0x11, 0x84,
0x12, 0xb9,
0x15, 0xc9, // lock detector threshold
0x16, 0x00,
0x17, 0x00,
0x18, 0x00,
0x19, 0x00,
0x1a, 0x00,
0x1f, 0x50,
0x20, 0x00,
0x21, 0x00,
0x22, 0x00,
0x23, 0x00,
0x28, 0x00, // out imp: normal out type: parallel FEC mode:0
0x29, 0x1e, // 1/2 threshold
0x2a, 0x14, // 2/3 threshold
0x2b, 0x0f, // 3/4 threshold
0x2c, 0x09, // 5/6 threshold
0x2d, 0x05, // 7/8 threshold
0x2e, 0x01,
0x31, 0x1f, // test all FECs
0x32, 0x19, // viterbi and synchro search
0x33, 0xfc, // rs control
0x34, 0x93, // error control
0x0f, 0x52,
0xff, 0xff
};
static int alps_bsru6_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio)
{
u8 aclk = 0;
u8 bclk = 0;
if (srate < 1500000) {
aclk = 0xb7;
bclk = 0x47;
} else if (srate < 3000000) {
aclk = 0xb7;
bclk = 0x4b;
} else if (srate < 7000000) {
aclk = 0xb7;
bclk = 0x4f;
} else if (srate < 14000000) {
aclk = 0xb7;
bclk = 0x53;
} else if (srate < 30000000) {
aclk = 0xb6;
bclk = 0x53;
} else if (srate < 45000000) {
aclk = 0xb4;
bclk = 0x51;
}
stv0299_writereg(fe, 0x13, aclk);
stv0299_writereg(fe, 0x14, bclk);
stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
stv0299_writereg(fe, 0x21, ratio & 0xf0);
return 0;
}
static int alps_bsru6_tuner_set_params(struct dvb_frontend *fe)
{
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
u8 buf[4];
u32 div;
struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
struct i2c_adapter *i2c = fe->tuner_priv;
if ((p->frequency < 950000) || (p->frequency > 2150000))
return -EINVAL;
div = (p->frequency + (125 - 1)) / 125; /* round correctly */
buf[0] = (div >> 8) & 0x7f;
buf[1] = div & 0xff;
buf[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
buf[3] = 0xC4;
if (p->frequency > 1530000)
buf[3] = 0xc0;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(i2c, &msg, 1) != 1)
return -EIO;
return 0;
}
static struct stv0299_config alps_bsru6_config = {
.demod_address = 0x68,
.inittab = alps_bsru6_inittab,
.mclk = 88000000UL,
.invert = 1,
.skip_reinit = 0,
.lock_output = STV0299_LOCKOUTPUT_1,
.volt13_op0_op1 = STV0299_VOLT13_OP1,
.min_delay_ms = 100,
.set_symbol_rate = alps_bsru6_set_symbol_rate,
};
#endif