linux/arch/x86/pci/mmconfig_64.c
Yinghai Lu 068258bc15 x86/PCI: host mmconfig detect clean up
Fix mmconfig detection to not assume a single mmconfig space in the
northbridge, paving the way for AMD fam10h + mcp55 CPUs.  On those, the
MSR has some range, but the mcp55 pci config will have another one.

Also helps the mcp55 + io55 case, where every one will have one range.

If it is mcp55, exclude the range that is used by CPU MSR, in other
words , if the CPU claims busses 0-255, the range in mcp55 is dropped,
because CPU HW will not route those ranges to mcp55 mmconfig to handle
it.

Signed-off-by: Yinghai Lu <yinghai.lu@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 11:40:22 -07:00

174 lines
3.9 KiB
C

/*
* mmconfig.c - Low-level direct PCI config space access via MMCONFIG
*
* This is an 64bit optimized version that always keeps the full mmconfig
* space mapped. This allows lockless config space operation.
*/
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/acpi.h>
#include <linux/bitmap.h>
#include <asm/e820.h>
#include <asm/pci_x86.h>
/* Static virtual mapping of the MMCONFIG aperture */
struct mmcfg_virt {
struct acpi_mcfg_allocation *cfg;
char __iomem *virt;
};
static struct mmcfg_virt *pci_mmcfg_virt;
static char __iomem *get_virt(unsigned int seg, unsigned bus)
{
struct acpi_mcfg_allocation *cfg;
int cfg_num;
for (cfg_num = 0; cfg_num < pci_mmcfg_config_num; cfg_num++) {
cfg = pci_mmcfg_virt[cfg_num].cfg;
if (cfg->pci_segment == seg &&
(cfg->start_bus_number <= bus) &&
(cfg->end_bus_number >= bus))
return pci_mmcfg_virt[cfg_num].virt;
}
/* Fall back to type 0 */
return NULL;
}
static char __iomem *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn)
{
char __iomem *addr;
addr = get_virt(seg, bus);
if (!addr)
return NULL;
return addr + ((bus << 20) | (devfn << 12));
}
static int pci_mmcfg_read(unsigned int seg, unsigned int bus,
unsigned int devfn, int reg, int len, u32 *value)
{
char __iomem *addr;
/* Why do we have this when nobody checks it. How about a BUG()!? -AK */
if (unlikely((bus > 255) || (devfn > 255) || (reg > 4095))) {
err: *value = -1;
return -EINVAL;
}
addr = pci_dev_base(seg, bus, devfn);
if (!addr)
goto err;
switch (len) {
case 1:
*value = mmio_config_readb(addr + reg);
break;
case 2:
*value = mmio_config_readw(addr + reg);
break;
case 4:
*value = mmio_config_readl(addr + reg);
break;
}
return 0;
}
static int pci_mmcfg_write(unsigned int seg, unsigned int bus,
unsigned int devfn, int reg, int len, u32 value)
{
char __iomem *addr;
/* Why do we have this when nobody checks it. How about a BUG()!? -AK */
if (unlikely((bus > 255) || (devfn > 255) || (reg > 4095)))
return -EINVAL;
addr = pci_dev_base(seg, bus, devfn);
if (!addr)
return -EINVAL;
switch (len) {
case 1:
mmio_config_writeb(addr + reg, value);
break;
case 2:
mmio_config_writew(addr + reg, value);
break;
case 4:
mmio_config_writel(addr + reg, value);
break;
}
return 0;
}
static struct pci_raw_ops pci_mmcfg = {
.read = pci_mmcfg_read,
.write = pci_mmcfg_write,
};
static void __iomem * __init mcfg_ioremap(struct acpi_mcfg_allocation *cfg)
{
void __iomem *addr;
u64 start, size;
start = cfg->start_bus_number;
start <<= 20;
start += cfg->address;
size = cfg->end_bus_number + 1 - cfg->start_bus_number;
size <<= 20;
addr = ioremap_nocache(start, size);
if (addr) {
printk(KERN_INFO "PCI: Using MMCONFIG at %Lx - %Lx\n",
start, start + size - 1);
addr -= cfg->start_bus_number << 20;
}
return addr;
}
int __init pci_mmcfg_arch_init(void)
{
int i;
pci_mmcfg_virt = kzalloc(sizeof(*pci_mmcfg_virt) *
pci_mmcfg_config_num, GFP_KERNEL);
if (pci_mmcfg_virt == NULL) {
printk(KERN_ERR "PCI: Can not allocate memory for mmconfig structures\n");
return 0;
}
for (i = 0; i < pci_mmcfg_config_num; ++i) {
pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i];
pci_mmcfg_virt[i].virt = mcfg_ioremap(&pci_mmcfg_config[i]);
if (!pci_mmcfg_virt[i].virt) {
printk(KERN_ERR "PCI: Cannot map mmconfig aperture for "
"segment %d\n",
pci_mmcfg_config[i].pci_segment);
pci_mmcfg_arch_free();
return 0;
}
}
raw_pci_ext_ops = &pci_mmcfg;
return 1;
}
void __init pci_mmcfg_arch_free(void)
{
int i;
if (pci_mmcfg_virt == NULL)
return;
for (i = 0; i < pci_mmcfg_config_num; ++i) {
if (pci_mmcfg_virt[i].virt) {
iounmap(pci_mmcfg_virt[i].virt + (pci_mmcfg_virt[i].cfg->start_bus_number << 20));
pci_mmcfg_virt[i].virt = NULL;
pci_mmcfg_virt[i].cfg = NULL;
}
}
kfree(pci_mmcfg_virt);
pci_mmcfg_virt = NULL;
}