mirror of
https://github.com/torvalds/linux.git
synced 2024-12-07 11:31:41 +00:00
6b5a12dbca
This branch is the culmination of 5 years of effort to bring the ARMv6 and ARMv7 platforms together such that they can all be enabled and boot the same kernel. It has been a tremendous amount of cleanup and refactoring by a huge number of people, and creation of several new (and major) subsystems to better abstract out all the platform details in an appropriate manner. The bulk of this branch is a large patchset from Arnd that brings several of the more minor and older platforms we have closer to multiplatform support. Among these are MMP, S3C64xx, Orion5x, mv78xx0 and realview Much of this is moving around header files from old mach directories, but there are also some cleanup patches of debug_ll (lowlevel debug per-platform options) and other parts. Linus Walleij also has some patchs to clean up the older ARM Realview platforms by finally introducing DT support, and Rob Herring has some for ARM Versatile which is now DT-only. Both of these platforms are now multiplatform. Finally, a couple of patches from Russell for Dove PMU, and a fix from Valentin Rothberg for Exynos ADC, which were rebased on top of the series to avoid conflicts. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIUAwUAVqAGcmCrR//JCVInAQLDog/4x9F0PHGmZhexGfFOpi2Od63Jjx55izRU zRXqRjjFjambOrZuOx8lEGDy/qzqKbsDU8D1P4IUugkDr2bLSXv+NTLZL1kNBIdm YOlJhw/BmzLYqauOHmBzGhtv1FDUk3rqbgTsP5tTWj5LpSkwjmqui3HBZpi+f3Rr YOn+NeQSARiw+51D0b106a9RFshQXRGgn5m3xFjLWhJqshb2z2Ew5cogX/zdwrrM ss1BFomxsvgk6S+snN6v7cEX2iXe3r89qNR5jEW5BgNpQGFsAUeXPr9zzH07L/Qq O7XLw9jt5MX/X5372zVHPb57WoflLbF9cFaaDUZV3eTqt3lC67BTxOtYIdC2i90k E5GYlsy88CRwT2EO+ok/6UTryph+hVv7JqHfbKfnISrbraMCK36DtDTpBIpZ9uYF rRB7ncJZUWBcyoe+qvitSl+2KV54iB1ez2RXsketxM98dDZsfB2M2ImFou1F/Pgg ALvpifPubi/uDe7xNUsSuaT6/3jAomBuNsxnkYJ3NeiH/+duZbOYGkzK/LlcjZyc UrA0IpLfwIFsBNzwfpZPZ1lkEu8Y1YZZ+Hv9k65q1wMuBDgrFI5zUeYrPZi4pN9T Yo1xP9FstVLDouJrpGZo12VIIxR1UBeGqfRI/BZ58LEF3PRq/g2OVFsdQia5gZKr ddiJKSL1Vw== =z1AW -----END PGP SIGNATURE----- Merge tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform code updates from Arnd Bergmann: "This branch is the culmination of 5 years of effort to bring the ARMv6 and ARMv7 platforms together such that they can all be enabled and boot the same kernel. It has been a tremendous amount of cleanup and refactoring by a huge number of people, and creation of several new (and major) subsystems to better abstract out all the platform details in an appropriate manner. The bulk of this branch is a large patchset from Arnd that brings several of the more minor and older platforms we have closer to multiplatform support. Among these are MMP, S3C64xx, Orion5x, mv78xx0 and realview Much of this is moving around header files from old mach directories, but there are also some cleanup patches of debug_ll (lowlevel debug per-platform options) and other parts. Linus Walleij also has some patchs to clean up the older ARM Realview platforms by finally introducing DT support, and Rob Herring has some for ARM Versatile which is now DT-only. Both of these platforms are now multiplatform. Finally, a couple of patches from Russell for Dove PMU, and a fix from Valentin Rothberg for Exynos ADC, which were rebased on top of the series to avoid conflicts" * tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits) ARM: realview: don't select SMP_ON_UP for UP builds ARM: s3c: simplify s3c_irqwake_{e,}intallow definition ARM: s3c64xx: fix pm-debug compilation iio: exynos-adc: fix irqf_oneshot.cocci warnings ARM: realview: build realview-dt SMP support only when used ARM: realview: select apropriate targets ARM: realview: clean up header files ARM: realview: make all header files local ARM: no longer make CPU targets visible separately ARM: integrator: use explicit core module options ARM: realview: enable multiplatform ARM: make default platform work for NOMMU ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location ARM: defconfig: use correct debug_ll settings ARM: versatile: convert to multi-platform ARM: versatile: merge mach code into a single file ARM: versatile: switch to DT only booting and remove legacy code ARM: versatile: add DT based PCI detection ARM: pxa: mark ezx structures as __maybe_unused ARM: pxa: mark raumfeld init functions as __maybe_unused ...
1329 lines
30 KiB
C
1329 lines
30 KiB
C
/*
|
|
* Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com/
|
|
*
|
|
* Copyright 2008 Openmoko, Inc.
|
|
* Copyright 2008 Simtec Electronics
|
|
* Ben Dooks <ben@simtec.co.uk>
|
|
* http://armlinux.simtec.co.uk/
|
|
*
|
|
* SAMSUNG - GPIOlib support
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/io.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/init.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/device.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/of.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/of_address.h>
|
|
|
|
#include <asm/irq.h>
|
|
|
|
#include <mach/irqs.h>
|
|
#include <mach/map.h>
|
|
#include <mach/regs-gpio.h>
|
|
#include <mach/gpio-samsung.h>
|
|
|
|
#include <plat/cpu.h>
|
|
#include <plat/gpio-core.h>
|
|
#include <plat/gpio-cfg.h>
|
|
#include <plat/gpio-cfg-helpers.h>
|
|
#include <plat/pm.h>
|
|
|
|
int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
|
|
unsigned int off, samsung_gpio_pull_t pull)
|
|
{
|
|
void __iomem *reg = chip->base + 0x08;
|
|
int shift = off * 2;
|
|
u32 pup;
|
|
|
|
pup = __raw_readl(reg);
|
|
pup &= ~(3 << shift);
|
|
pup |= pull << shift;
|
|
__raw_writel(pup, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
|
|
unsigned int off)
|
|
{
|
|
void __iomem *reg = chip->base + 0x08;
|
|
int shift = off * 2;
|
|
u32 pup = __raw_readl(reg);
|
|
|
|
pup >>= shift;
|
|
pup &= 0x3;
|
|
|
|
return (__force samsung_gpio_pull_t)pup;
|
|
}
|
|
|
|
int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip,
|
|
unsigned int off, samsung_gpio_pull_t pull)
|
|
{
|
|
switch (pull) {
|
|
case S3C_GPIO_PULL_NONE:
|
|
pull = 0x01;
|
|
break;
|
|
case S3C_GPIO_PULL_UP:
|
|
pull = 0x00;
|
|
break;
|
|
case S3C_GPIO_PULL_DOWN:
|
|
pull = 0x02;
|
|
break;
|
|
}
|
|
return samsung_gpio_setpull_updown(chip, off, pull);
|
|
}
|
|
|
|
samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip,
|
|
unsigned int off)
|
|
{
|
|
samsung_gpio_pull_t pull;
|
|
|
|
pull = samsung_gpio_getpull_updown(chip, off);
|
|
|
|
switch (pull) {
|
|
case 0x00:
|
|
pull = S3C_GPIO_PULL_UP;
|
|
break;
|
|
case 0x01:
|
|
case 0x03:
|
|
pull = S3C_GPIO_PULL_NONE;
|
|
break;
|
|
case 0x02:
|
|
pull = S3C_GPIO_PULL_DOWN;
|
|
break;
|
|
}
|
|
|
|
return pull;
|
|
}
|
|
|
|
static int s3c24xx_gpio_setpull_1(struct samsung_gpio_chip *chip,
|
|
unsigned int off, samsung_gpio_pull_t pull,
|
|
samsung_gpio_pull_t updown)
|
|
{
|
|
void __iomem *reg = chip->base + 0x08;
|
|
u32 pup = __raw_readl(reg);
|
|
|
|
if (pull == updown)
|
|
pup &= ~(1 << off);
|
|
else if (pull == S3C_GPIO_PULL_NONE)
|
|
pup |= (1 << off);
|
|
else
|
|
return -EINVAL;
|
|
|
|
__raw_writel(pup, reg);
|
|
return 0;
|
|
}
|
|
|
|
static samsung_gpio_pull_t s3c24xx_gpio_getpull_1(struct samsung_gpio_chip *chip,
|
|
unsigned int off,
|
|
samsung_gpio_pull_t updown)
|
|
{
|
|
void __iomem *reg = chip->base + 0x08;
|
|
u32 pup = __raw_readl(reg);
|
|
|
|
pup &= (1 << off);
|
|
return pup ? S3C_GPIO_PULL_NONE : updown;
|
|
}
|
|
|
|
samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip,
|
|
unsigned int off)
|
|
{
|
|
return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP);
|
|
}
|
|
|
|
int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip,
|
|
unsigned int off, samsung_gpio_pull_t pull)
|
|
{
|
|
return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP);
|
|
}
|
|
|
|
samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip,
|
|
unsigned int off)
|
|
{
|
|
return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN);
|
|
}
|
|
|
|
int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip,
|
|
unsigned int off, samsung_gpio_pull_t pull)
|
|
{
|
|
return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN);
|
|
}
|
|
|
|
/*
|
|
* samsung_gpio_setcfg_2bit - Samsung 2bit style GPIO configuration.
|
|
* @chip: The gpio chip that is being configured.
|
|
* @off: The offset for the GPIO being configured.
|
|
* @cfg: The configuration value to set.
|
|
*
|
|
* This helper deal with the GPIO cases where the control register
|
|
* has two bits of configuration per gpio, which have the following
|
|
* functions:
|
|
* 00 = input
|
|
* 01 = output
|
|
* 1x = special function
|
|
*/
|
|
|
|
static int samsung_gpio_setcfg_2bit(struct samsung_gpio_chip *chip,
|
|
unsigned int off, unsigned int cfg)
|
|
{
|
|
void __iomem *reg = chip->base;
|
|
unsigned int shift = off * 2;
|
|
u32 con;
|
|
|
|
if (samsung_gpio_is_cfg_special(cfg)) {
|
|
cfg &= 0xf;
|
|
if (cfg > 3)
|
|
return -EINVAL;
|
|
|
|
cfg <<= shift;
|
|
}
|
|
|
|
con = __raw_readl(reg);
|
|
con &= ~(0x3 << shift);
|
|
con |= cfg;
|
|
__raw_writel(con, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* samsung_gpio_getcfg_2bit - Samsung 2bit style GPIO configuration read.
|
|
* @chip: The gpio chip that is being configured.
|
|
* @off: The offset for the GPIO being configured.
|
|
*
|
|
* The reverse of samsung_gpio_setcfg_2bit(). Will return a value which
|
|
* could be directly passed back to samsung_gpio_setcfg_2bit(), from the
|
|
* S3C_GPIO_SPECIAL() macro.
|
|
*/
|
|
|
|
static unsigned int samsung_gpio_getcfg_2bit(struct samsung_gpio_chip *chip,
|
|
unsigned int off)
|
|
{
|
|
u32 con;
|
|
|
|
con = __raw_readl(chip->base);
|
|
con >>= off * 2;
|
|
con &= 3;
|
|
|
|
/* this conversion works for IN and OUT as well as special mode */
|
|
return S3C_GPIO_SPECIAL(con);
|
|
}
|
|
|
|
/*
|
|
* samsung_gpio_setcfg_4bit - Samsung 4bit single register GPIO config.
|
|
* @chip: The gpio chip that is being configured.
|
|
* @off: The offset for the GPIO being configured.
|
|
* @cfg: The configuration value to set.
|
|
*
|
|
* This helper deal with the GPIO cases where the control register has 4 bits
|
|
* of control per GPIO, generally in the form of:
|
|
* 0000 = Input
|
|
* 0001 = Output
|
|
* others = Special functions (dependent on bank)
|
|
*
|
|
* Note, since the code to deal with the case where there are two control
|
|
* registers instead of one, we do not have a separate set of functions for
|
|
* each case.
|
|
*/
|
|
|
|
static int samsung_gpio_setcfg_4bit(struct samsung_gpio_chip *chip,
|
|
unsigned int off, unsigned int cfg)
|
|
{
|
|
void __iomem *reg = chip->base;
|
|
unsigned int shift = (off & 7) * 4;
|
|
u32 con;
|
|
|
|
if (off < 8 && chip->chip.ngpio > 8)
|
|
reg -= 4;
|
|
|
|
if (samsung_gpio_is_cfg_special(cfg)) {
|
|
cfg &= 0xf;
|
|
cfg <<= shift;
|
|
}
|
|
|
|
con = __raw_readl(reg);
|
|
con &= ~(0xf << shift);
|
|
con |= cfg;
|
|
__raw_writel(con, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* samsung_gpio_getcfg_4bit - Samsung 4bit single register GPIO config read.
|
|
* @chip: The gpio chip that is being configured.
|
|
* @off: The offset for the GPIO being configured.
|
|
*
|
|
* The reverse of samsung_gpio_setcfg_4bit(), turning a gpio configuration
|
|
* register setting into a value the software can use, such as could be passed
|
|
* to samsung_gpio_setcfg_4bit().
|
|
*
|
|
* @sa samsung_gpio_getcfg_2bit
|
|
*/
|
|
|
|
static unsigned samsung_gpio_getcfg_4bit(struct samsung_gpio_chip *chip,
|
|
unsigned int off)
|
|
{
|
|
void __iomem *reg = chip->base;
|
|
unsigned int shift = (off & 7) * 4;
|
|
u32 con;
|
|
|
|
if (off < 8 && chip->chip.ngpio > 8)
|
|
reg -= 4;
|
|
|
|
con = __raw_readl(reg);
|
|
con >>= shift;
|
|
con &= 0xf;
|
|
|
|
/* this conversion works for IN and OUT as well as special mode */
|
|
return S3C_GPIO_SPECIAL(con);
|
|
}
|
|
|
|
#ifdef CONFIG_PLAT_S3C24XX
|
|
/*
|
|
* s3c24xx_gpio_setcfg_abank - S3C24XX style GPIO configuration (Bank A)
|
|
* @chip: The gpio chip that is being configured.
|
|
* @off: The offset for the GPIO being configured.
|
|
* @cfg: The configuration value to set.
|
|
*
|
|
* This helper deal with the GPIO cases where the control register
|
|
* has one bit of configuration for the gpio, where setting the bit
|
|
* means the pin is in special function mode and unset means output.
|
|
*/
|
|
|
|
static int s3c24xx_gpio_setcfg_abank(struct samsung_gpio_chip *chip,
|
|
unsigned int off, unsigned int cfg)
|
|
{
|
|
void __iomem *reg = chip->base;
|
|
unsigned int shift = off;
|
|
u32 con;
|
|
|
|
if (samsung_gpio_is_cfg_special(cfg)) {
|
|
cfg &= 0xf;
|
|
|
|
/* Map output to 0, and SFN2 to 1 */
|
|
cfg -= 1;
|
|
if (cfg > 1)
|
|
return -EINVAL;
|
|
|
|
cfg <<= shift;
|
|
}
|
|
|
|
con = __raw_readl(reg);
|
|
con &= ~(0x1 << shift);
|
|
con |= cfg;
|
|
__raw_writel(con, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* s3c24xx_gpio_getcfg_abank - S3C24XX style GPIO configuration read (Bank A)
|
|
* @chip: The gpio chip that is being configured.
|
|
* @off: The offset for the GPIO being configured.
|
|
*
|
|
* The reverse of s3c24xx_gpio_setcfg_abank() turning an GPIO into a usable
|
|
* GPIO configuration value.
|
|
*
|
|
* @sa samsung_gpio_getcfg_2bit
|
|
* @sa samsung_gpio_getcfg_4bit
|
|
*/
|
|
|
|
static unsigned s3c24xx_gpio_getcfg_abank(struct samsung_gpio_chip *chip,
|
|
unsigned int off)
|
|
{
|
|
u32 con;
|
|
|
|
con = __raw_readl(chip->base);
|
|
con >>= off;
|
|
con &= 1;
|
|
con++;
|
|
|
|
return S3C_GPIO_SFN(con);
|
|
}
|
|
#endif
|
|
|
|
static void __init samsung_gpiolib_set_cfg(struct samsung_gpio_cfg *chipcfg,
|
|
int nr_chips)
|
|
{
|
|
for (; nr_chips > 0; nr_chips--, chipcfg++) {
|
|
if (!chipcfg->set_config)
|
|
chipcfg->set_config = samsung_gpio_setcfg_4bit;
|
|
if (!chipcfg->get_config)
|
|
chipcfg->get_config = samsung_gpio_getcfg_4bit;
|
|
if (!chipcfg->set_pull)
|
|
chipcfg->set_pull = samsung_gpio_setpull_updown;
|
|
if (!chipcfg->get_pull)
|
|
chipcfg->get_pull = samsung_gpio_getpull_updown;
|
|
}
|
|
}
|
|
|
|
struct samsung_gpio_cfg s3c24xx_gpiocfg_default = {
|
|
.set_config = samsung_gpio_setcfg_2bit,
|
|
.get_config = samsung_gpio_getcfg_2bit,
|
|
};
|
|
|
|
#ifdef CONFIG_PLAT_S3C24XX
|
|
static struct samsung_gpio_cfg s3c24xx_gpiocfg_banka = {
|
|
.set_config = s3c24xx_gpio_setcfg_abank,
|
|
.get_config = s3c24xx_gpio_getcfg_abank,
|
|
};
|
|
#endif
|
|
|
|
static struct samsung_gpio_cfg samsung_gpio_cfgs[] = {
|
|
[0] = {
|
|
.cfg_eint = 0x0,
|
|
},
|
|
[1] = {
|
|
.cfg_eint = 0x3,
|
|
},
|
|
[2] = {
|
|
.cfg_eint = 0x7,
|
|
},
|
|
[3] = {
|
|
.cfg_eint = 0xF,
|
|
},
|
|
[4] = {
|
|
.cfg_eint = 0x0,
|
|
.set_config = samsung_gpio_setcfg_2bit,
|
|
.get_config = samsung_gpio_getcfg_2bit,
|
|
},
|
|
[5] = {
|
|
.cfg_eint = 0x2,
|
|
.set_config = samsung_gpio_setcfg_2bit,
|
|
.get_config = samsung_gpio_getcfg_2bit,
|
|
},
|
|
[6] = {
|
|
.cfg_eint = 0x3,
|
|
.set_config = samsung_gpio_setcfg_2bit,
|
|
.get_config = samsung_gpio_getcfg_2bit,
|
|
},
|
|
[7] = {
|
|
.set_config = samsung_gpio_setcfg_2bit,
|
|
.get_config = samsung_gpio_getcfg_2bit,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* Default routines for controlling GPIO, based on the original S3C24XX
|
|
* GPIO functions which deal with the case where each gpio bank of the
|
|
* chip is as following:
|
|
*
|
|
* base + 0x00: Control register, 2 bits per gpio
|
|
* gpio n: 2 bits starting at (2*n)
|
|
* 00 = input, 01 = output, others mean special-function
|
|
* base + 0x04: Data register, 1 bit per gpio
|
|
* bit n: data bit n
|
|
*/
|
|
|
|
static int samsung_gpiolib_2bit_input(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
|
|
void __iomem *base = ourchip->base;
|
|
unsigned long flags;
|
|
unsigned long con;
|
|
|
|
samsung_gpio_lock(ourchip, flags);
|
|
|
|
con = __raw_readl(base + 0x00);
|
|
con &= ~(3 << (offset * 2));
|
|
|
|
__raw_writel(con, base + 0x00);
|
|
|
|
samsung_gpio_unlock(ourchip, flags);
|
|
return 0;
|
|
}
|
|
|
|
static int samsung_gpiolib_2bit_output(struct gpio_chip *chip,
|
|
unsigned offset, int value)
|
|
{
|
|
struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
|
|
void __iomem *base = ourchip->base;
|
|
unsigned long flags;
|
|
unsigned long dat;
|
|
unsigned long con;
|
|
|
|
samsung_gpio_lock(ourchip, flags);
|
|
|
|
dat = __raw_readl(base + 0x04);
|
|
dat &= ~(1 << offset);
|
|
if (value)
|
|
dat |= 1 << offset;
|
|
__raw_writel(dat, base + 0x04);
|
|
|
|
con = __raw_readl(base + 0x00);
|
|
con &= ~(3 << (offset * 2));
|
|
con |= 1 << (offset * 2);
|
|
|
|
__raw_writel(con, base + 0x00);
|
|
__raw_writel(dat, base + 0x04);
|
|
|
|
samsung_gpio_unlock(ourchip, flags);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The samsung_gpiolib_4bit routines are to control the gpio banks where
|
|
* the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
|
|
* following example:
|
|
*
|
|
* base + 0x00: Control register, 4 bits per gpio
|
|
* gpio n: 4 bits starting at (4*n)
|
|
* 0000 = input, 0001 = output, others mean special-function
|
|
* base + 0x04: Data register, 1 bit per gpio
|
|
* bit n: data bit n
|
|
*
|
|
* Note, since the data register is one bit per gpio and is at base + 0x4
|
|
* we can use samsung_gpiolib_get and samsung_gpiolib_set to change the
|
|
* state of the output.
|
|
*/
|
|
|
|
static int samsung_gpiolib_4bit_input(struct gpio_chip *chip,
|
|
unsigned int offset)
|
|
{
|
|
struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
|
|
void __iomem *base = ourchip->base;
|
|
unsigned long con;
|
|
|
|
con = __raw_readl(base + GPIOCON_OFF);
|
|
if (ourchip->bitmap_gpio_int & BIT(offset))
|
|
con |= 0xf << con_4bit_shift(offset);
|
|
else
|
|
con &= ~(0xf << con_4bit_shift(offset));
|
|
__raw_writel(con, base + GPIOCON_OFF);
|
|
|
|
pr_debug("%s: %p: CON now %08lx\n", __func__, base, con);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int samsung_gpiolib_4bit_output(struct gpio_chip *chip,
|
|
unsigned int offset, int value)
|
|
{
|
|
struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
|
|
void __iomem *base = ourchip->base;
|
|
unsigned long con;
|
|
unsigned long dat;
|
|
|
|
con = __raw_readl(base + GPIOCON_OFF);
|
|
con &= ~(0xf << con_4bit_shift(offset));
|
|
con |= 0x1 << con_4bit_shift(offset);
|
|
|
|
dat = __raw_readl(base + GPIODAT_OFF);
|
|
|
|
if (value)
|
|
dat |= 1 << offset;
|
|
else
|
|
dat &= ~(1 << offset);
|
|
|
|
__raw_writel(dat, base + GPIODAT_OFF);
|
|
__raw_writel(con, base + GPIOCON_OFF);
|
|
__raw_writel(dat, base + GPIODAT_OFF);
|
|
|
|
pr_debug("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The next set of routines are for the case where the GPIO configuration
|
|
* registers are 4 bits per GPIO but there is more than one register (the
|
|
* bank has more than 8 GPIOs.
|
|
*
|
|
* This case is the similar to the 4 bit case, but the registers are as
|
|
* follows:
|
|
*
|
|
* base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
|
|
* gpio n: 4 bits starting at (4*n)
|
|
* 0000 = input, 0001 = output, others mean special-function
|
|
* base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
|
|
* gpio n: 4 bits starting at (4*n)
|
|
* 0000 = input, 0001 = output, others mean special-function
|
|
* base + 0x08: Data register, 1 bit per gpio
|
|
* bit n: data bit n
|
|
*
|
|
* To allow us to use the samsung_gpiolib_get and samsung_gpiolib_set
|
|
* routines we store the 'base + 0x4' address so that these routines see
|
|
* the data register at ourchip->base + 0x04.
|
|
*/
|
|
|
|
static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip,
|
|
unsigned int offset)
|
|
{
|
|
struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
|
|
void __iomem *base = ourchip->base;
|
|
void __iomem *regcon = base;
|
|
unsigned long con;
|
|
|
|
if (offset > 7)
|
|
offset -= 8;
|
|
else
|
|
regcon -= 4;
|
|
|
|
con = __raw_readl(regcon);
|
|
con &= ~(0xf << con_4bit_shift(offset));
|
|
__raw_writel(con, regcon);
|
|
|
|
pr_debug("%s: %p: CON %08lx\n", __func__, base, con);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
|
|
unsigned int offset, int value)
|
|
{
|
|
struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
|
|
void __iomem *base = ourchip->base;
|
|
void __iomem *regcon = base;
|
|
unsigned long con;
|
|
unsigned long dat;
|
|
unsigned con_offset = offset;
|
|
|
|
if (con_offset > 7)
|
|
con_offset -= 8;
|
|
else
|
|
regcon -= 4;
|
|
|
|
con = __raw_readl(regcon);
|
|
con &= ~(0xf << con_4bit_shift(con_offset));
|
|
con |= 0x1 << con_4bit_shift(con_offset);
|
|
|
|
dat = __raw_readl(base + GPIODAT_OFF);
|
|
|
|
if (value)
|
|
dat |= 1 << offset;
|
|
else
|
|
dat &= ~(1 << offset);
|
|
|
|
__raw_writel(dat, base + GPIODAT_OFF);
|
|
__raw_writel(con, regcon);
|
|
__raw_writel(dat, base + GPIODAT_OFF);
|
|
|
|
pr_debug("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PLAT_S3C24XX
|
|
/* The next set of routines are for the case of s3c24xx bank a */
|
|
|
|
static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
|
|
unsigned offset, int value)
|
|
{
|
|
struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
|
|
void __iomem *base = ourchip->base;
|
|
unsigned long flags;
|
|
unsigned long dat;
|
|
unsigned long con;
|
|
|
|
local_irq_save(flags);
|
|
|
|
con = __raw_readl(base + 0x00);
|
|
dat = __raw_readl(base + 0x04);
|
|
|
|
dat &= ~(1 << offset);
|
|
if (value)
|
|
dat |= 1 << offset;
|
|
|
|
__raw_writel(dat, base + 0x04);
|
|
|
|
con &= ~(1 << offset);
|
|
|
|
__raw_writel(con, base + 0x00);
|
|
__raw_writel(dat, base + 0x04);
|
|
|
|
local_irq_restore(flags);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static void samsung_gpiolib_set(struct gpio_chip *chip,
|
|
unsigned offset, int value)
|
|
{
|
|
struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
|
|
void __iomem *base = ourchip->base;
|
|
unsigned long flags;
|
|
unsigned long dat;
|
|
|
|
samsung_gpio_lock(ourchip, flags);
|
|
|
|
dat = __raw_readl(base + 0x04);
|
|
dat &= ~(1 << offset);
|
|
if (value)
|
|
dat |= 1 << offset;
|
|
__raw_writel(dat, base + 0x04);
|
|
|
|
samsung_gpio_unlock(ourchip, flags);
|
|
}
|
|
|
|
static int samsung_gpiolib_get(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
|
|
unsigned long val;
|
|
|
|
val = __raw_readl(ourchip->base + 0x04);
|
|
val >>= offset;
|
|
val &= 1;
|
|
|
|
return val;
|
|
}
|
|
|
|
/*
|
|
* CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios
|
|
* for use with the configuration calls, and other parts of the s3c gpiolib
|
|
* support code.
|
|
*
|
|
* Not all s3c support code will need this, as some configurations of cpu
|
|
* may only support one or two different configuration options and have an
|
|
* easy gpio to samsung_gpio_chip mapping function. If this is the case, then
|
|
* the machine support file should provide its own samsung_gpiolib_getchip()
|
|
* and any other necessary functions.
|
|
*/
|
|
|
|
#ifdef CONFIG_S3C_GPIO_TRACK
|
|
struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END];
|
|
|
|
static __init void s3c_gpiolib_track(struct samsung_gpio_chip *chip)
|
|
{
|
|
unsigned int gpn;
|
|
int i;
|
|
|
|
gpn = chip->chip.base;
|
|
for (i = 0; i < chip->chip.ngpio; i++, gpn++) {
|
|
BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios));
|
|
s3c_gpios[gpn] = chip;
|
|
}
|
|
}
|
|
#endif /* CONFIG_S3C_GPIO_TRACK */
|
|
|
|
/*
|
|
* samsung_gpiolib_add() - add the Samsung gpio_chip.
|
|
* @chip: The chip to register
|
|
*
|
|
* This is a wrapper to gpiochip_add() that takes our specific gpio chip
|
|
* information and makes the necessary alterations for the platform and
|
|
* notes the information for use with the configuration systems and any
|
|
* other parts of the system.
|
|
*/
|
|
|
|
static void __init samsung_gpiolib_add(struct samsung_gpio_chip *chip)
|
|
{
|
|
struct gpio_chip *gc = &chip->chip;
|
|
int ret;
|
|
|
|
BUG_ON(!chip->base);
|
|
BUG_ON(!gc->label);
|
|
BUG_ON(!gc->ngpio);
|
|
|
|
spin_lock_init(&chip->lock);
|
|
|
|
if (!gc->direction_input)
|
|
gc->direction_input = samsung_gpiolib_2bit_input;
|
|
if (!gc->direction_output)
|
|
gc->direction_output = samsung_gpiolib_2bit_output;
|
|
if (!gc->set)
|
|
gc->set = samsung_gpiolib_set;
|
|
if (!gc->get)
|
|
gc->get = samsung_gpiolib_get;
|
|
|
|
#ifdef CONFIG_PM
|
|
if (chip->pm != NULL) {
|
|
if (!chip->pm->save || !chip->pm->resume)
|
|
pr_err("gpio: %s has missing PM functions\n",
|
|
gc->label);
|
|
} else
|
|
pr_err("gpio: %s has no PM function\n", gc->label);
|
|
#endif
|
|
|
|
/* gpiochip_add() prints own failure message on error. */
|
|
ret = gpiochip_add_data(gc, chip);
|
|
if (ret >= 0)
|
|
s3c_gpiolib_track(chip);
|
|
}
|
|
|
|
static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip,
|
|
int nr_chips, void __iomem *base)
|
|
{
|
|
int i;
|
|
struct gpio_chip *gc = &chip->chip;
|
|
|
|
for (i = 0 ; i < nr_chips; i++, chip++) {
|
|
/* skip banks not present on SoC */
|
|
if (chip->chip.base >= S3C_GPIO_END)
|
|
continue;
|
|
|
|
if (!chip->config)
|
|
chip->config = &s3c24xx_gpiocfg_default;
|
|
if (!chip->pm)
|
|
chip->pm = __gpio_pm(&samsung_gpio_pm_2bit);
|
|
if ((base != NULL) && (chip->base == NULL))
|
|
chip->base = base + ((i) * 0x10);
|
|
|
|
if (!gc->direction_input)
|
|
gc->direction_input = samsung_gpiolib_2bit_input;
|
|
if (!gc->direction_output)
|
|
gc->direction_output = samsung_gpiolib_2bit_output;
|
|
|
|
samsung_gpiolib_add(chip);
|
|
}
|
|
}
|
|
|
|
static void __init samsung_gpiolib_add_2bit_chips(struct samsung_gpio_chip *chip,
|
|
int nr_chips, void __iomem *base,
|
|
unsigned int offset)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0 ; i < nr_chips; i++, chip++) {
|
|
chip->chip.direction_input = samsung_gpiolib_2bit_input;
|
|
chip->chip.direction_output = samsung_gpiolib_2bit_output;
|
|
|
|
if (!chip->config)
|
|
chip->config = &samsung_gpio_cfgs[7];
|
|
if (!chip->pm)
|
|
chip->pm = __gpio_pm(&samsung_gpio_pm_2bit);
|
|
if ((base != NULL) && (chip->base == NULL))
|
|
chip->base = base + ((i) * offset);
|
|
|
|
samsung_gpiolib_add(chip);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config.
|
|
* @chip: The gpio chip that is being configured.
|
|
* @nr_chips: The no of chips (gpio ports) for the GPIO being configured.
|
|
*
|
|
* This helper deal with the GPIO cases where the control register has 4 bits
|
|
* of control per GPIO, generally in the form of:
|
|
* 0000 = Input
|
|
* 0001 = Output
|
|
* others = Special functions (dependent on bank)
|
|
*
|
|
* Note, since the code to deal with the case where there are two control
|
|
* registers instead of one, we do not have a separate set of function
|
|
* (samsung_gpiolib_add_4bit2_chips)for each case.
|
|
*/
|
|
|
|
static void __init samsung_gpiolib_add_4bit_chips(struct samsung_gpio_chip *chip,
|
|
int nr_chips, void __iomem *base)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0 ; i < nr_chips; i++, chip++) {
|
|
chip->chip.direction_input = samsung_gpiolib_4bit_input;
|
|
chip->chip.direction_output = samsung_gpiolib_4bit_output;
|
|
|
|
if (!chip->config)
|
|
chip->config = &samsung_gpio_cfgs[2];
|
|
if (!chip->pm)
|
|
chip->pm = __gpio_pm(&samsung_gpio_pm_4bit);
|
|
if ((base != NULL) && (chip->base == NULL))
|
|
chip->base = base + ((i) * 0x20);
|
|
|
|
chip->bitmap_gpio_int = 0;
|
|
|
|
samsung_gpiolib_add(chip);
|
|
}
|
|
}
|
|
|
|
static void __init samsung_gpiolib_add_4bit2_chips(struct samsung_gpio_chip *chip,
|
|
int nr_chips)
|
|
{
|
|
for (; nr_chips > 0; nr_chips--, chip++) {
|
|
chip->chip.direction_input = samsung_gpiolib_4bit2_input;
|
|
chip->chip.direction_output = samsung_gpiolib_4bit2_output;
|
|
|
|
if (!chip->config)
|
|
chip->config = &samsung_gpio_cfgs[2];
|
|
if (!chip->pm)
|
|
chip->pm = __gpio_pm(&samsung_gpio_pm_4bit);
|
|
|
|
samsung_gpiolib_add(chip);
|
|
}
|
|
}
|
|
|
|
int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
struct samsung_gpio_chip *samsung_chip = gpiochip_get_data(chip);
|
|
|
|
return samsung_chip->irq_base + offset;
|
|
}
|
|
|
|
#ifdef CONFIG_PLAT_S3C24XX
|
|
static int s3c24xx_gpiolib_fbank_to_irq(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
if (offset < 4) {
|
|
if (soc_is_s3c2412())
|
|
return IRQ_EINT0_2412 + offset;
|
|
else
|
|
return IRQ_EINT0 + offset;
|
|
}
|
|
|
|
if (offset < 8)
|
|
return IRQ_EINT4 + offset - 4;
|
|
|
|
return -EINVAL;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARCH_S3C64XX
|
|
static int s3c64xx_gpiolib_mbank_to_irq(struct gpio_chip *chip, unsigned pin)
|
|
{
|
|
return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
|
|
}
|
|
|
|
static int s3c64xx_gpiolib_lbank_to_irq(struct gpio_chip *chip, unsigned pin)
|
|
{
|
|
return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
|
|
}
|
|
#endif
|
|
|
|
struct samsung_gpio_chip s3c24xx_gpios[] = {
|
|
#ifdef CONFIG_PLAT_S3C24XX
|
|
{
|
|
.config = &s3c24xx_gpiocfg_banka,
|
|
.chip = {
|
|
.base = S3C2410_GPA(0),
|
|
.owner = THIS_MODULE,
|
|
.label = "GPIOA",
|
|
.ngpio = 27,
|
|
.direction_input = s3c24xx_gpiolib_banka_input,
|
|
.direction_output = s3c24xx_gpiolib_banka_output,
|
|
},
|
|
}, {
|
|
.chip = {
|
|
.base = S3C2410_GPB(0),
|
|
.owner = THIS_MODULE,
|
|
.label = "GPIOB",
|
|
.ngpio = 11,
|
|
},
|
|
}, {
|
|
.chip = {
|
|
.base = S3C2410_GPC(0),
|
|
.owner = THIS_MODULE,
|
|
.label = "GPIOC",
|
|
.ngpio = 16,
|
|
},
|
|
}, {
|
|
.chip = {
|
|
.base = S3C2410_GPD(0),
|
|
.owner = THIS_MODULE,
|
|
.label = "GPIOD",
|
|
.ngpio = 16,
|
|
},
|
|
}, {
|
|
.chip = {
|
|
.base = S3C2410_GPE(0),
|
|
.label = "GPIOE",
|
|
.owner = THIS_MODULE,
|
|
.ngpio = 16,
|
|
},
|
|
}, {
|
|
.chip = {
|
|
.base = S3C2410_GPF(0),
|
|
.owner = THIS_MODULE,
|
|
.label = "GPIOF",
|
|
.ngpio = 8,
|
|
.to_irq = s3c24xx_gpiolib_fbank_to_irq,
|
|
},
|
|
}, {
|
|
.irq_base = IRQ_EINT8,
|
|
.chip = {
|
|
.base = S3C2410_GPG(0),
|
|
.owner = THIS_MODULE,
|
|
.label = "GPIOG",
|
|
.ngpio = 16,
|
|
.to_irq = samsung_gpiolib_to_irq,
|
|
},
|
|
}, {
|
|
.chip = {
|
|
.base = S3C2410_GPH(0),
|
|
.owner = THIS_MODULE,
|
|
.label = "GPIOH",
|
|
.ngpio = 15,
|
|
},
|
|
},
|
|
/* GPIOS for the S3C2443 and later devices. */
|
|
{
|
|
.base = S3C2440_GPJCON,
|
|
.chip = {
|
|
.base = S3C2410_GPJ(0),
|
|
.owner = THIS_MODULE,
|
|
.label = "GPIOJ",
|
|
.ngpio = 16,
|
|
},
|
|
}, {
|
|
.base = S3C2443_GPKCON,
|
|
.chip = {
|
|
.base = S3C2410_GPK(0),
|
|
.owner = THIS_MODULE,
|
|
.label = "GPIOK",
|
|
.ngpio = 16,
|
|
},
|
|
}, {
|
|
.base = S3C2443_GPLCON,
|
|
.chip = {
|
|
.base = S3C2410_GPL(0),
|
|
.owner = THIS_MODULE,
|
|
.label = "GPIOL",
|
|
.ngpio = 15,
|
|
},
|
|
}, {
|
|
.base = S3C2443_GPMCON,
|
|
.chip = {
|
|
.base = S3C2410_GPM(0),
|
|
.owner = THIS_MODULE,
|
|
.label = "GPIOM",
|
|
.ngpio = 2,
|
|
},
|
|
},
|
|
#endif
|
|
};
|
|
|
|
/*
|
|
* GPIO bank summary:
|
|
*
|
|
* Bank GPIOs Style SlpCon ExtInt Group
|
|
* A 8 4Bit Yes 1
|
|
* B 7 4Bit Yes 1
|
|
* C 8 4Bit Yes 2
|
|
* D 5 4Bit Yes 3
|
|
* E 5 4Bit Yes None
|
|
* F 16 2Bit Yes 4 [1]
|
|
* G 7 4Bit Yes 5
|
|
* H 10 4Bit[2] Yes 6
|
|
* I 16 2Bit Yes None
|
|
* J 12 2Bit Yes None
|
|
* K 16 4Bit[2] No None
|
|
* L 15 4Bit[2] No None
|
|
* M 6 4Bit No IRQ_EINT
|
|
* N 16 2Bit No IRQ_EINT
|
|
* O 16 2Bit Yes 7
|
|
* P 15 2Bit Yes 8
|
|
* Q 9 2Bit Yes 9
|
|
*
|
|
* [1] BANKF pins 14,15 do not form part of the external interrupt sources
|
|
* [2] BANK has two control registers, GPxCON0 and GPxCON1
|
|
*/
|
|
|
|
static struct samsung_gpio_chip s3c64xx_gpios_4bit[] = {
|
|
#ifdef CONFIG_ARCH_S3C64XX
|
|
{
|
|
.chip = {
|
|
.base = S3C64XX_GPA(0),
|
|
.ngpio = S3C64XX_GPIO_A_NR,
|
|
.label = "GPA",
|
|
},
|
|
}, {
|
|
.chip = {
|
|
.base = S3C64XX_GPB(0),
|
|
.ngpio = S3C64XX_GPIO_B_NR,
|
|
.label = "GPB",
|
|
},
|
|
}, {
|
|
.chip = {
|
|
.base = S3C64XX_GPC(0),
|
|
.ngpio = S3C64XX_GPIO_C_NR,
|
|
.label = "GPC",
|
|
},
|
|
}, {
|
|
.chip = {
|
|
.base = S3C64XX_GPD(0),
|
|
.ngpio = S3C64XX_GPIO_D_NR,
|
|
.label = "GPD",
|
|
},
|
|
}, {
|
|
.config = &samsung_gpio_cfgs[0],
|
|
.chip = {
|
|
.base = S3C64XX_GPE(0),
|
|
.ngpio = S3C64XX_GPIO_E_NR,
|
|
.label = "GPE",
|
|
},
|
|
}, {
|
|
.base = S3C64XX_GPG_BASE,
|
|
.chip = {
|
|
.base = S3C64XX_GPG(0),
|
|
.ngpio = S3C64XX_GPIO_G_NR,
|
|
.label = "GPG",
|
|
},
|
|
}, {
|
|
.base = S3C64XX_GPM_BASE,
|
|
.config = &samsung_gpio_cfgs[1],
|
|
.chip = {
|
|
.base = S3C64XX_GPM(0),
|
|
.ngpio = S3C64XX_GPIO_M_NR,
|
|
.label = "GPM",
|
|
.to_irq = s3c64xx_gpiolib_mbank_to_irq,
|
|
},
|
|
},
|
|
#endif
|
|
};
|
|
|
|
static struct samsung_gpio_chip s3c64xx_gpios_4bit2[] = {
|
|
#ifdef CONFIG_ARCH_S3C64XX
|
|
{
|
|
.base = S3C64XX_GPH_BASE + 0x4,
|
|
.chip = {
|
|
.base = S3C64XX_GPH(0),
|
|
.ngpio = S3C64XX_GPIO_H_NR,
|
|
.label = "GPH",
|
|
},
|
|
}, {
|
|
.base = S3C64XX_GPK_BASE + 0x4,
|
|
.config = &samsung_gpio_cfgs[0],
|
|
.chip = {
|
|
.base = S3C64XX_GPK(0),
|
|
.ngpio = S3C64XX_GPIO_K_NR,
|
|
.label = "GPK",
|
|
},
|
|
}, {
|
|
.base = S3C64XX_GPL_BASE + 0x4,
|
|
.config = &samsung_gpio_cfgs[1],
|
|
.chip = {
|
|
.base = S3C64XX_GPL(0),
|
|
.ngpio = S3C64XX_GPIO_L_NR,
|
|
.label = "GPL",
|
|
.to_irq = s3c64xx_gpiolib_lbank_to_irq,
|
|
},
|
|
},
|
|
#endif
|
|
};
|
|
|
|
static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = {
|
|
#ifdef CONFIG_ARCH_S3C64XX
|
|
{
|
|
.base = S3C64XX_GPF_BASE,
|
|
.config = &samsung_gpio_cfgs[6],
|
|
.chip = {
|
|
.base = S3C64XX_GPF(0),
|
|
.ngpio = S3C64XX_GPIO_F_NR,
|
|
.label = "GPF",
|
|
},
|
|
}, {
|
|
.config = &samsung_gpio_cfgs[7],
|
|
.chip = {
|
|
.base = S3C64XX_GPI(0),
|
|
.ngpio = S3C64XX_GPIO_I_NR,
|
|
.label = "GPI",
|
|
},
|
|
}, {
|
|
.config = &samsung_gpio_cfgs[7],
|
|
.chip = {
|
|
.base = S3C64XX_GPJ(0),
|
|
.ngpio = S3C64XX_GPIO_J_NR,
|
|
.label = "GPJ",
|
|
},
|
|
}, {
|
|
.config = &samsung_gpio_cfgs[6],
|
|
.chip = {
|
|
.base = S3C64XX_GPO(0),
|
|
.ngpio = S3C64XX_GPIO_O_NR,
|
|
.label = "GPO",
|
|
},
|
|
}, {
|
|
.config = &samsung_gpio_cfgs[6],
|
|
.chip = {
|
|
.base = S3C64XX_GPP(0),
|
|
.ngpio = S3C64XX_GPIO_P_NR,
|
|
.label = "GPP",
|
|
},
|
|
}, {
|
|
.config = &samsung_gpio_cfgs[6],
|
|
.chip = {
|
|
.base = S3C64XX_GPQ(0),
|
|
.ngpio = S3C64XX_GPIO_Q_NR,
|
|
.label = "GPQ",
|
|
},
|
|
}, {
|
|
.base = S3C64XX_GPN_BASE,
|
|
.irq_base = IRQ_EINT(0),
|
|
.config = &samsung_gpio_cfgs[5],
|
|
.chip = {
|
|
.base = S3C64XX_GPN(0),
|
|
.ngpio = S3C64XX_GPIO_N_NR,
|
|
.label = "GPN",
|
|
.to_irq = samsung_gpiolib_to_irq,
|
|
},
|
|
},
|
|
#endif
|
|
};
|
|
|
|
/* TODO: cleanup soc_is_* */
|
|
static __init int samsung_gpiolib_init(void)
|
|
{
|
|
/*
|
|
* Currently there are two drivers that can provide GPIO support for
|
|
* Samsung SoCs. For device tree enabled platforms, the new
|
|
* pinctrl-samsung driver is used, providing both GPIO and pin control
|
|
* interfaces. For legacy (non-DT) platforms this driver is used.
|
|
*/
|
|
if (of_have_populated_dt())
|
|
return 0;
|
|
|
|
if (soc_is_s3c24xx()) {
|
|
samsung_gpiolib_set_cfg(samsung_gpio_cfgs,
|
|
ARRAY_SIZE(samsung_gpio_cfgs));
|
|
s3c24xx_gpiolib_add_chips(s3c24xx_gpios,
|
|
ARRAY_SIZE(s3c24xx_gpios), S3C24XX_VA_GPIO);
|
|
} else if (soc_is_s3c64xx()) {
|
|
samsung_gpiolib_set_cfg(samsung_gpio_cfgs,
|
|
ARRAY_SIZE(samsung_gpio_cfgs));
|
|
samsung_gpiolib_add_2bit_chips(s3c64xx_gpios_2bit,
|
|
ARRAY_SIZE(s3c64xx_gpios_2bit),
|
|
S3C64XX_VA_GPIO + 0xE0, 0x20);
|
|
samsung_gpiolib_add_4bit_chips(s3c64xx_gpios_4bit,
|
|
ARRAY_SIZE(s3c64xx_gpios_4bit),
|
|
S3C64XX_VA_GPIO);
|
|
samsung_gpiolib_add_4bit2_chips(s3c64xx_gpios_4bit2,
|
|
ARRAY_SIZE(s3c64xx_gpios_4bit2));
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
core_initcall(samsung_gpiolib_init);
|
|
|
|
int s3c_gpio_cfgpin(unsigned int pin, unsigned int config)
|
|
{
|
|
struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
|
|
unsigned long flags;
|
|
int offset;
|
|
int ret;
|
|
|
|
if (!chip)
|
|
return -EINVAL;
|
|
|
|
offset = pin - chip->chip.base;
|
|
|
|
samsung_gpio_lock(chip, flags);
|
|
ret = samsung_gpio_do_setcfg(chip, offset, config);
|
|
samsung_gpio_unlock(chip, flags);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(s3c_gpio_cfgpin);
|
|
|
|
int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
|
|
unsigned int cfg)
|
|
{
|
|
int ret;
|
|
|
|
for (; nr > 0; nr--, start++) {
|
|
ret = s3c_gpio_cfgpin(start, cfg);
|
|
if (ret != 0)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range);
|
|
|
|
int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
|
|
unsigned int cfg, samsung_gpio_pull_t pull)
|
|
{
|
|
int ret;
|
|
|
|
for (; nr > 0; nr--, start++) {
|
|
s3c_gpio_setpull(start, pull);
|
|
ret = s3c_gpio_cfgpin(start, cfg);
|
|
if (ret != 0)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range);
|
|
|
|
unsigned s3c_gpio_getcfg(unsigned int pin)
|
|
{
|
|
struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
|
|
unsigned long flags;
|
|
unsigned ret = 0;
|
|
int offset;
|
|
|
|
if (chip) {
|
|
offset = pin - chip->chip.base;
|
|
|
|
samsung_gpio_lock(chip, flags);
|
|
ret = samsung_gpio_do_getcfg(chip, offset);
|
|
samsung_gpio_unlock(chip, flags);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(s3c_gpio_getcfg);
|
|
|
|
int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull)
|
|
{
|
|
struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
|
|
unsigned long flags;
|
|
int offset, ret;
|
|
|
|
if (!chip)
|
|
return -EINVAL;
|
|
|
|
offset = pin - chip->chip.base;
|
|
|
|
samsung_gpio_lock(chip, flags);
|
|
ret = samsung_gpio_do_setpull(chip, offset, pull);
|
|
samsung_gpio_unlock(chip, flags);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(s3c_gpio_setpull);
|
|
|
|
samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin)
|
|
{
|
|
struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
|
|
unsigned long flags;
|
|
int offset;
|
|
u32 pup = 0;
|
|
|
|
if (chip) {
|
|
offset = pin - chip->chip.base;
|
|
|
|
samsung_gpio_lock(chip, flags);
|
|
pup = samsung_gpio_do_getpull(chip, offset);
|
|
samsung_gpio_unlock(chip, flags);
|
|
}
|
|
|
|
return (__force samsung_gpio_pull_t)pup;
|
|
}
|
|
EXPORT_SYMBOL(s3c_gpio_getpull);
|
|
|
|
#ifdef CONFIG_PLAT_S3C24XX
|
|
unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
|
|
{
|
|
unsigned long flags;
|
|
unsigned long misccr;
|
|
|
|
local_irq_save(flags);
|
|
misccr = __raw_readl(S3C24XX_MISCCR);
|
|
misccr &= ~clear;
|
|
misccr ^= change;
|
|
__raw_writel(misccr, S3C24XX_MISCCR);
|
|
local_irq_restore(flags);
|
|
|
|
return misccr;
|
|
}
|
|
EXPORT_SYMBOL(s3c2410_modify_misccr);
|
|
#endif
|