mirror of
https://github.com/torvalds/linux.git
synced 2024-11-28 15:11:31 +00:00
fd4ea48688
RV1126 has five GPIOs groups - GPIO0 in PD_MMU and GPIO1-4 in PD_BUS. In GPIO0, up to Lower C group GPIO0_C[3:0] is part of PMU but rest of the groups from there are part of GRF. Added pinctrl support for RV1126 and the pull, drv and schmitt calculations are inferred from [1] authored by Jianqun Xu. [1] https://github.com/rockchip-linux/kernel/blob/develop-4.19/drivers/pinctrl/pinctrl-rockchip.c Cc: linux-gpio@vger.kernel.org Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> Signed-off-by: Jagan Teki <jagan@edgeble.ai> Link: https://lore.kernel.org/r/20220818124132.125304-8-jagan@edgeble.ai Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
468 lines
12 KiB
C
468 lines
12 KiB
C
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
/*
|
|
* Copyright (c) 2020-2021 Rockchip Electronics Co. Ltd.
|
|
*
|
|
* Copyright (c) 2013 MundoReader S.L.
|
|
* Author: Heiko Stuebner <heiko@sntech.de>
|
|
*
|
|
* With some ideas taken from pinctrl-samsung:
|
|
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
* Copyright (c) 2012 Linaro Ltd
|
|
* https://www.linaro.org
|
|
*
|
|
* and pinctrl-at91:
|
|
* Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
|
|
*/
|
|
|
|
#ifndef _PINCTRL_ROCKCHIP_H
|
|
#define _PINCTRL_ROCKCHIP_H
|
|
|
|
#define RK_GPIO0_A0 0
|
|
#define RK_GPIO0_A1 1
|
|
#define RK_GPIO0_A2 2
|
|
#define RK_GPIO0_A3 3
|
|
#define RK_GPIO0_A4 4
|
|
#define RK_GPIO0_A5 5
|
|
#define RK_GPIO0_A6 6
|
|
#define RK_GPIO0_A7 7
|
|
#define RK_GPIO0_B0 8
|
|
#define RK_GPIO0_B1 9
|
|
#define RK_GPIO0_B2 10
|
|
#define RK_GPIO0_B3 11
|
|
#define RK_GPIO0_B4 12
|
|
#define RK_GPIO0_B5 13
|
|
#define RK_GPIO0_B6 14
|
|
#define RK_GPIO0_B7 15
|
|
#define RK_GPIO0_C0 16
|
|
#define RK_GPIO0_C1 17
|
|
#define RK_GPIO0_C2 18
|
|
#define RK_GPIO0_C3 19
|
|
#define RK_GPIO0_C4 20
|
|
#define RK_GPIO0_C5 21
|
|
#define RK_GPIO0_C6 22
|
|
#define RK_GPIO0_C7 23
|
|
#define RK_GPIO0_D0 24
|
|
#define RK_GPIO0_D1 25
|
|
#define RK_GPIO0_D2 26
|
|
#define RK_GPIO0_D3 27
|
|
#define RK_GPIO0_D4 28
|
|
#define RK_GPIO0_D5 29
|
|
#define RK_GPIO0_D6 30
|
|
#define RK_GPIO0_D7 31
|
|
|
|
#define RK_GPIO1_A0 32
|
|
#define RK_GPIO1_A1 33
|
|
#define RK_GPIO1_A2 34
|
|
#define RK_GPIO1_A3 35
|
|
#define RK_GPIO1_A4 36
|
|
#define RK_GPIO1_A5 37
|
|
#define RK_GPIO1_A6 38
|
|
#define RK_GPIO1_A7 39
|
|
#define RK_GPIO1_B0 40
|
|
#define RK_GPIO1_B1 41
|
|
#define RK_GPIO1_B2 42
|
|
#define RK_GPIO1_B3 43
|
|
#define RK_GPIO1_B4 44
|
|
#define RK_GPIO1_B5 45
|
|
#define RK_GPIO1_B6 46
|
|
#define RK_GPIO1_B7 47
|
|
#define RK_GPIO1_C0 48
|
|
#define RK_GPIO1_C1 49
|
|
#define RK_GPIO1_C2 50
|
|
#define RK_GPIO1_C3 51
|
|
#define RK_GPIO1_C4 52
|
|
#define RK_GPIO1_C5 53
|
|
#define RK_GPIO1_C6 54
|
|
#define RK_GPIO1_C7 55
|
|
#define RK_GPIO1_D0 56
|
|
#define RK_GPIO1_D1 57
|
|
#define RK_GPIO1_D2 58
|
|
#define RK_GPIO1_D3 59
|
|
#define RK_GPIO1_D4 60
|
|
#define RK_GPIO1_D5 61
|
|
#define RK_GPIO1_D6 62
|
|
#define RK_GPIO1_D7 63
|
|
|
|
#define RK_GPIO2_A0 64
|
|
#define RK_GPIO2_A1 65
|
|
#define RK_GPIO2_A2 66
|
|
#define RK_GPIO2_A3 67
|
|
#define RK_GPIO2_A4 68
|
|
#define RK_GPIO2_A5 69
|
|
#define RK_GPIO2_A6 70
|
|
#define RK_GPIO2_A7 71
|
|
#define RK_GPIO2_B0 72
|
|
#define RK_GPIO2_B1 73
|
|
#define RK_GPIO2_B2 74
|
|
#define RK_GPIO2_B3 75
|
|
#define RK_GPIO2_B4 76
|
|
#define RK_GPIO2_B5 77
|
|
#define RK_GPIO2_B6 78
|
|
#define RK_GPIO2_B7 79
|
|
#define RK_GPIO2_C0 80
|
|
#define RK_GPIO2_C1 81
|
|
#define RK_GPIO2_C2 82
|
|
#define RK_GPIO2_C3 83
|
|
#define RK_GPIO2_C4 84
|
|
#define RK_GPIO2_C5 85
|
|
#define RK_GPIO2_C6 86
|
|
#define RK_GPIO2_C7 87
|
|
#define RK_GPIO2_D0 88
|
|
#define RK_GPIO2_D1 89
|
|
#define RK_GPIO2_D2 90
|
|
#define RK_GPIO2_D3 91
|
|
#define RK_GPIO2_D4 92
|
|
#define RK_GPIO2_D5 93
|
|
#define RK_GPIO2_D6 94
|
|
#define RK_GPIO2_D7 95
|
|
|
|
#define RK_GPIO3_A0 96
|
|
#define RK_GPIO3_A1 97
|
|
#define RK_GPIO3_A2 98
|
|
#define RK_GPIO3_A3 99
|
|
#define RK_GPIO3_A4 100
|
|
#define RK_GPIO3_A5 101
|
|
#define RK_GPIO3_A6 102
|
|
#define RK_GPIO3_A7 103
|
|
#define RK_GPIO3_B0 104
|
|
#define RK_GPIO3_B1 105
|
|
#define RK_GPIO3_B2 106
|
|
#define RK_GPIO3_B3 107
|
|
#define RK_GPIO3_B4 108
|
|
#define RK_GPIO3_B5 109
|
|
#define RK_GPIO3_B6 110
|
|
#define RK_GPIO3_B7 111
|
|
#define RK_GPIO3_C0 112
|
|
#define RK_GPIO3_C1 113
|
|
#define RK_GPIO3_C2 114
|
|
#define RK_GPIO3_C3 115
|
|
#define RK_GPIO3_C4 116
|
|
#define RK_GPIO3_C5 117
|
|
#define RK_GPIO3_C6 118
|
|
#define RK_GPIO3_C7 119
|
|
#define RK_GPIO3_D0 120
|
|
#define RK_GPIO3_D1 121
|
|
#define RK_GPIO3_D2 122
|
|
#define RK_GPIO3_D3 123
|
|
#define RK_GPIO3_D4 124
|
|
#define RK_GPIO3_D5 125
|
|
#define RK_GPIO3_D6 126
|
|
#define RK_GPIO3_D7 127
|
|
|
|
#define RK_GPIO4_A0 128
|
|
#define RK_GPIO4_A1 129
|
|
#define RK_GPIO4_A2 130
|
|
#define RK_GPIO4_A3 131
|
|
#define RK_GPIO4_A4 132
|
|
#define RK_GPIO4_A5 133
|
|
#define RK_GPIO4_A6 134
|
|
#define RK_GPIO4_A7 135
|
|
#define RK_GPIO4_B0 136
|
|
#define RK_GPIO4_B1 137
|
|
#define RK_GPIO4_B2 138
|
|
#define RK_GPIO4_B3 139
|
|
#define RK_GPIO4_B4 140
|
|
#define RK_GPIO4_B5 141
|
|
#define RK_GPIO4_B6 142
|
|
#define RK_GPIO4_B7 143
|
|
#define RK_GPIO4_C0 144
|
|
#define RK_GPIO4_C1 145
|
|
#define RK_GPIO4_C2 146
|
|
#define RK_GPIO4_C3 147
|
|
#define RK_GPIO4_C4 148
|
|
#define RK_GPIO4_C5 149
|
|
#define RK_GPIO4_C6 150
|
|
#define RK_GPIO4_C7 151
|
|
#define RK_GPIO4_D0 152
|
|
#define RK_GPIO4_D1 153
|
|
#define RK_GPIO4_D2 154
|
|
#define RK_GPIO4_D3 155
|
|
#define RK_GPIO4_D4 156
|
|
#define RK_GPIO4_D5 157
|
|
#define RK_GPIO4_D6 158
|
|
#define RK_GPIO4_D7 159
|
|
|
|
enum rockchip_pinctrl_type {
|
|
PX30,
|
|
RV1108,
|
|
RV1126,
|
|
RK2928,
|
|
RK3066B,
|
|
RK3128,
|
|
RK3188,
|
|
RK3288,
|
|
RK3308,
|
|
RK3368,
|
|
RK3399,
|
|
RK3568,
|
|
RK3588,
|
|
};
|
|
|
|
/**
|
|
* struct rockchip_gpio_regs
|
|
* @port_dr: data register
|
|
* @port_ddr: data direction register
|
|
* @int_en: interrupt enable
|
|
* @int_mask: interrupt mask
|
|
* @int_type: interrupt trigger type, such as high, low, edge trriger type.
|
|
* @int_polarity: interrupt polarity enable register
|
|
* @int_bothedge: interrupt bothedge enable register
|
|
* @int_status: interrupt status register
|
|
* @int_rawstatus: int_status = int_rawstatus & int_mask
|
|
* @debounce: enable debounce for interrupt signal
|
|
* @dbclk_div_en: enable divider for debounce clock
|
|
* @dbclk_div_con: setting for divider of debounce clock
|
|
* @port_eoi: end of interrupt of the port
|
|
* @ext_port: port data from external
|
|
* @version_id: controller version register
|
|
*/
|
|
struct rockchip_gpio_regs {
|
|
u32 port_dr;
|
|
u32 port_ddr;
|
|
u32 int_en;
|
|
u32 int_mask;
|
|
u32 int_type;
|
|
u32 int_polarity;
|
|
u32 int_bothedge;
|
|
u32 int_status;
|
|
u32 int_rawstatus;
|
|
u32 debounce;
|
|
u32 dbclk_div_en;
|
|
u32 dbclk_div_con;
|
|
u32 port_eoi;
|
|
u32 ext_port;
|
|
u32 version_id;
|
|
};
|
|
|
|
/**
|
|
* struct rockchip_iomux
|
|
* @type: iomux variant using IOMUX_* constants
|
|
* @offset: if initialized to -1 it will be autocalculated, by specifying
|
|
* an initial offset value the relevant source offset can be reset
|
|
* to a new value for autocalculating the following iomux registers.
|
|
*/
|
|
struct rockchip_iomux {
|
|
int type;
|
|
int offset;
|
|
};
|
|
|
|
/*
|
|
* enum type index corresponding to rockchip_perpin_drv_list arrays index.
|
|
*/
|
|
enum rockchip_pin_drv_type {
|
|
DRV_TYPE_IO_DEFAULT = 0,
|
|
DRV_TYPE_IO_1V8_OR_3V0,
|
|
DRV_TYPE_IO_1V8_ONLY,
|
|
DRV_TYPE_IO_1V8_3V0_AUTO,
|
|
DRV_TYPE_IO_3V3_ONLY,
|
|
DRV_TYPE_MAX
|
|
};
|
|
|
|
/*
|
|
* enum type index corresponding to rockchip_pull_list arrays index.
|
|
*/
|
|
enum rockchip_pin_pull_type {
|
|
PULL_TYPE_IO_DEFAULT = 0,
|
|
PULL_TYPE_IO_1V8_ONLY,
|
|
PULL_TYPE_MAX
|
|
};
|
|
|
|
/**
|
|
* struct rockchip_drv
|
|
* @drv_type: drive strength variant using rockchip_perpin_drv_type
|
|
* @offset: if initialized to -1 it will be autocalculated, by specifying
|
|
* an initial offset value the relevant source offset can be reset
|
|
* to a new value for autocalculating the following drive strength
|
|
* registers. if used chips own cal_drv func instead to calculate
|
|
* registers offset, the variant could be ignored.
|
|
*/
|
|
struct rockchip_drv {
|
|
enum rockchip_pin_drv_type drv_type;
|
|
int offset;
|
|
};
|
|
|
|
/**
|
|
* struct rockchip_pin_bank
|
|
* @dev: the pinctrl device bind to the bank
|
|
* @reg_base: register base of the gpio bank
|
|
* @regmap_pull: optional separate register for additional pull settings
|
|
* @clk: clock of the gpio bank
|
|
* @db_clk: clock of the gpio debounce
|
|
* @irq: interrupt of the gpio bank
|
|
* @saved_masks: Saved content of GPIO_INTEN at suspend time.
|
|
* @pin_base: first pin number
|
|
* @nr_pins: number of pins in this bank
|
|
* @name: name of the bank
|
|
* @bank_num: number of the bank, to account for holes
|
|
* @iomux: array describing the 4 iomux sources of the bank
|
|
* @drv: array describing the 4 drive strength sources of the bank
|
|
* @pull_type: array describing the 4 pull type sources of the bank
|
|
* @valid: is all necessary information present
|
|
* @of_node: dt node of this bank
|
|
* @drvdata: common pinctrl basedata
|
|
* @domain: irqdomain of the gpio bank
|
|
* @gpio_chip: gpiolib chip
|
|
* @grange: gpio range
|
|
* @slock: spinlock for the gpio bank
|
|
* @toggle_edge_mode: bit mask to toggle (falling/rising) edge mode
|
|
* @recalced_mask: bit mask to indicate a need to recalulate the mask
|
|
* @route_mask: bits describing the routing pins of per bank
|
|
* @deferred_output: gpio output settings to be done after gpio bank probed
|
|
* @deferred_lock: mutex for the deferred_output shared btw gpio and pinctrl
|
|
*/
|
|
struct rockchip_pin_bank {
|
|
struct device *dev;
|
|
void __iomem *reg_base;
|
|
struct regmap *regmap_pull;
|
|
struct clk *clk;
|
|
struct clk *db_clk;
|
|
int irq;
|
|
u32 saved_masks;
|
|
u32 pin_base;
|
|
u8 nr_pins;
|
|
char *name;
|
|
u8 bank_num;
|
|
struct rockchip_iomux iomux[4];
|
|
struct rockchip_drv drv[4];
|
|
enum rockchip_pin_pull_type pull_type[4];
|
|
bool valid;
|
|
struct device_node *of_node;
|
|
struct rockchip_pinctrl *drvdata;
|
|
struct irq_domain *domain;
|
|
struct gpio_chip gpio_chip;
|
|
struct pinctrl_gpio_range grange;
|
|
raw_spinlock_t slock;
|
|
const struct rockchip_gpio_regs *gpio_regs;
|
|
u32 gpio_type;
|
|
u32 toggle_edge_mode;
|
|
u32 recalced_mask;
|
|
u32 route_mask;
|
|
struct list_head deferred_pins;
|
|
struct mutex deferred_lock;
|
|
};
|
|
|
|
/**
|
|
* struct rockchip_mux_recalced_data: represent a pin iomux data.
|
|
* @num: bank number.
|
|
* @pin: pin number.
|
|
* @bit: index at register.
|
|
* @reg: register offset.
|
|
* @mask: mask bit
|
|
*/
|
|
struct rockchip_mux_recalced_data {
|
|
u8 num;
|
|
u8 pin;
|
|
u32 reg;
|
|
u8 bit;
|
|
u8 mask;
|
|
};
|
|
|
|
enum rockchip_mux_route_location {
|
|
ROCKCHIP_ROUTE_SAME = 0,
|
|
ROCKCHIP_ROUTE_PMU,
|
|
ROCKCHIP_ROUTE_GRF,
|
|
};
|
|
|
|
/**
|
|
* struct rockchip_mux_recalced_data: represent a pin iomux data.
|
|
* @bank_num: bank number.
|
|
* @pin: index at register or used to calc index.
|
|
* @func: the min pin.
|
|
* @route_location: the mux route location (same, pmu, grf).
|
|
* @route_offset: the max pin.
|
|
* @route_val: the register offset.
|
|
*/
|
|
struct rockchip_mux_route_data {
|
|
u8 bank_num;
|
|
u8 pin;
|
|
u8 func;
|
|
enum rockchip_mux_route_location route_location;
|
|
u32 route_offset;
|
|
u32 route_val;
|
|
};
|
|
|
|
struct rockchip_pin_ctrl {
|
|
struct rockchip_pin_bank *pin_banks;
|
|
u32 nr_banks;
|
|
u32 nr_pins;
|
|
char *label;
|
|
enum rockchip_pinctrl_type type;
|
|
int grf_mux_offset;
|
|
int pmu_mux_offset;
|
|
int grf_drv_offset;
|
|
int pmu_drv_offset;
|
|
struct rockchip_mux_recalced_data *iomux_recalced;
|
|
u32 niomux_recalced;
|
|
struct rockchip_mux_route_data *iomux_routes;
|
|
u32 niomux_routes;
|
|
|
|
int (*pull_calc_reg)(struct rockchip_pin_bank *bank,
|
|
int pin_num, struct regmap **regmap,
|
|
int *reg, u8 *bit);
|
|
int (*drv_calc_reg)(struct rockchip_pin_bank *bank,
|
|
int pin_num, struct regmap **regmap,
|
|
int *reg, u8 *bit);
|
|
int (*schmitt_calc_reg)(struct rockchip_pin_bank *bank,
|
|
int pin_num, struct regmap **regmap,
|
|
int *reg, u8 *bit);
|
|
};
|
|
|
|
struct rockchip_pin_config {
|
|
unsigned int func;
|
|
unsigned long *configs;
|
|
unsigned int nconfigs;
|
|
};
|
|
|
|
enum pin_config_param;
|
|
|
|
struct rockchip_pin_deferred {
|
|
struct list_head head;
|
|
unsigned int pin;
|
|
enum pin_config_param param;
|
|
u32 arg;
|
|
};
|
|
|
|
/**
|
|
* struct rockchip_pin_group: represent group of pins of a pinmux function.
|
|
* @name: name of the pin group, used to lookup the group.
|
|
* @pins: the pins included in this group.
|
|
* @npins: number of pins included in this group.
|
|
* @data: local pin configuration
|
|
*/
|
|
struct rockchip_pin_group {
|
|
const char *name;
|
|
unsigned int npins;
|
|
unsigned int *pins;
|
|
struct rockchip_pin_config *data;
|
|
};
|
|
|
|
/**
|
|
* struct rockchip_pmx_func: represent a pin function.
|
|
* @name: name of the pin function, used to lookup the function.
|
|
* @groups: one or more names of pin groups that provide this function.
|
|
* @ngroups: number of groups included in @groups.
|
|
*/
|
|
struct rockchip_pmx_func {
|
|
const char *name;
|
|
const char **groups;
|
|
u8 ngroups;
|
|
};
|
|
|
|
struct rockchip_pinctrl {
|
|
struct regmap *regmap_base;
|
|
int reg_size;
|
|
struct regmap *regmap_pull;
|
|
struct regmap *regmap_pmu;
|
|
struct device *dev;
|
|
struct rockchip_pin_ctrl *ctrl;
|
|
struct pinctrl_desc pctl;
|
|
struct pinctrl_dev *pctl_dev;
|
|
struct rockchip_pin_group *groups;
|
|
unsigned int ngroups;
|
|
struct rockchip_pmx_func *functions;
|
|
unsigned int nfunctions;
|
|
};
|
|
|
|
#endif
|