mirror of
https://github.com/torvalds/linux.git
synced 2024-12-29 14:21:47 +00:00
7b43da4cfd
Adds device tree support for davinci_mmc. Also add binding documentation. As of now tested for non-dma PIO mode and without GPIO card_detect/ write_protect option because of dependencies on EDMA and GPIO module DT support. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Sekhar Nori <nsekhar@ti.com> Cc: linux-mmc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: davinci-linux-open-source@linux.davincidsp.com Cc: devicetree-discuss@lists.ozlabs.org Cc: cjb@laptop.org Cc: Sekhar Nori <nsekhar@ti.com> Cc: mporter@ti.com Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
34 lines
1.0 KiB
Plaintext
34 lines
1.0 KiB
Plaintext
* TI Highspeed MMC host controller for DaVinci
|
|
|
|
The Highspeed MMC Host Controller on TI DaVinci family
|
|
provides an interface for MMC, SD and SDIO types of memory cards.
|
|
|
|
This file documents the properties used by the davinci_mmc driver.
|
|
|
|
Required properties:
|
|
- compatible:
|
|
Should be "ti,da830-mmc": for da830, da850, dm365
|
|
Should be "ti,dm355-mmc": for dm355, dm644x
|
|
|
|
Optional properties:
|
|
- bus-width: Number of data lines, can be <1>, <4>, or <8>, default <1>
|
|
- max-frequency: Maximum operating clock frequency, default 25MHz.
|
|
- dmas: List of DMA specifiers with the controller specific format
|
|
as described in the generic DMA client binding. A tx and rx
|
|
specifier is required.
|
|
- dma-names: RX and TX DMA request names. These strings correspond
|
|
1:1 with the DMA specifiers listed in dmas.
|
|
|
|
Example:
|
|
mmc0: mmc@1c40000 {
|
|
compatible = "ti,da830-mmc",
|
|
reg = <0x40000 0x1000>;
|
|
interrupts = <16>;
|
|
status = "okay";
|
|
bus-width = <4>;
|
|
max-frequency = <50000000>;
|
|
dmas = <&edma 16
|
|
&edma 17>;
|
|
dma-names = "rx", "tx";
|
|
};
|