mirror of
https://github.com/torvalds/linux.git
synced 2024-12-29 22:31:32 +00:00
348d1bf75c
NVIDIA's Tegra114 added two more configuration parameter in pinmux i.e. rcv-sel and drive type. rcv-sel: Select between High and Normal VIL/VIH receivers. RCVR_SEL=1: High VIL/VIH RCVR_SEL=0: Normal VIL/VIH drv_type: Ouptput drive type: 33-50 ohm driver: 0x1 66-100ohm driver: 0x0 Add support of these parameters to be configure from DTS file. Tegra20 and Tegra30 does not support this configuration and hence initialize their pinmux structure with reg = -1. Originally written by Pritesh Raithatha. Changes by ldewangan: - remove drvtype_width as it is always 2. - Better describe the change. Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
207 lines
7.1 KiB
C
207 lines
7.1 KiB
C
/*
|
|
* Driver for the NVIDIA Tegra pinmux
|
|
*
|
|
* Copyright (c) 2011, NVIDIA CORPORATION. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*/
|
|
|
|
#ifndef __PINMUX_TEGRA_H__
|
|
#define __PINMUX_TEGRA_H__
|
|
|
|
enum tegra_pinconf_param {
|
|
/* argument: tegra_pinconf_pull */
|
|
TEGRA_PINCONF_PARAM_PULL,
|
|
/* argument: tegra_pinconf_tristate */
|
|
TEGRA_PINCONF_PARAM_TRISTATE,
|
|
/* argument: Boolean */
|
|
TEGRA_PINCONF_PARAM_ENABLE_INPUT,
|
|
/* argument: Boolean */
|
|
TEGRA_PINCONF_PARAM_OPEN_DRAIN,
|
|
/* argument: Boolean */
|
|
TEGRA_PINCONF_PARAM_LOCK,
|
|
/* argument: Boolean */
|
|
TEGRA_PINCONF_PARAM_IORESET,
|
|
/* argument: Boolean */
|
|
TEGRA_PINCONF_PARAM_RCV_SEL,
|
|
/* argument: Boolean */
|
|
TEGRA_PINCONF_PARAM_HIGH_SPEED_MODE,
|
|
/* argument: Boolean */
|
|
TEGRA_PINCONF_PARAM_SCHMITT,
|
|
/* argument: Boolean */
|
|
TEGRA_PINCONF_PARAM_LOW_POWER_MODE,
|
|
/* argument: Integer, range is HW-dependant */
|
|
TEGRA_PINCONF_PARAM_DRIVE_DOWN_STRENGTH,
|
|
/* argument: Integer, range is HW-dependant */
|
|
TEGRA_PINCONF_PARAM_DRIVE_UP_STRENGTH,
|
|
/* argument: Integer, range is HW-dependant */
|
|
TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING,
|
|
/* argument: Integer, range is HW-dependant */
|
|
TEGRA_PINCONF_PARAM_SLEW_RATE_RISING,
|
|
/* argument: Integer, range is HW-dependant */
|
|
TEGRA_PINCONF_PARAM_DRIVE_TYPE,
|
|
};
|
|
|
|
enum tegra_pinconf_pull {
|
|
TEGRA_PINCONFIG_PULL_NONE,
|
|
TEGRA_PINCONFIG_PULL_DOWN,
|
|
TEGRA_PINCONFIG_PULL_UP,
|
|
};
|
|
|
|
enum tegra_pinconf_tristate {
|
|
TEGRA_PINCONFIG_DRIVEN,
|
|
TEGRA_PINCONFIG_TRISTATE,
|
|
};
|
|
|
|
#define TEGRA_PINCONF_PACK(_param_, _arg_) ((_param_) << 16 | (_arg_))
|
|
#define TEGRA_PINCONF_UNPACK_PARAM(_conf_) ((_conf_) >> 16)
|
|
#define TEGRA_PINCONF_UNPACK_ARG(_conf_) ((_conf_) & 0xffff)
|
|
|
|
/**
|
|
* struct tegra_function - Tegra pinctrl mux function
|
|
* @name: The name of the function, exported to pinctrl core.
|
|
* @groups: An array of pin groups that may select this function.
|
|
* @ngroups: The number of entries in @groups.
|
|
*/
|
|
struct tegra_function {
|
|
const char *name;
|
|
const char * const *groups;
|
|
unsigned ngroups;
|
|
};
|
|
|
|
/**
|
|
* struct tegra_pingroup - Tegra pin group
|
|
* @mux_reg: Mux register offset. -1 if unsupported.
|
|
* @mux_bank: Mux register bank. 0 if unsupported.
|
|
* @mux_bit: Mux register bit. 0 if unsupported.
|
|
* @pupd_reg: Pull-up/down register offset. -1 if unsupported.
|
|
* @pupd_bank: Pull-up/down register bank. 0 if unsupported.
|
|
* @pupd_bit: Pull-up/down register bit. 0 if unsupported.
|
|
* @tri_reg: Tri-state register offset. -1 if unsupported.
|
|
* @tri_bank: Tri-state register bank. 0 if unsupported.
|
|
* @tri_bit: Tri-state register bit. 0 if unsupported.
|
|
* @einput_reg: Enable-input register offset. -1 if unsupported.
|
|
* @einput_bank: Enable-input register bank. 0 if unsupported.
|
|
* @einput_bit: Enable-input register bit. 0 if unsupported.
|
|
* @odrain_reg: Open-drain register offset. -1 if unsupported.
|
|
* @odrain_bank: Open-drain register bank. 0 if unsupported.
|
|
* @odrain_bit: Open-drain register bit. 0 if unsupported.
|
|
* @lock_reg: Lock register offset. -1 if unsupported.
|
|
* @lock_bank: Lock register bank. 0 if unsupported.
|
|
* @lock_bit: Lock register bit. 0 if unsupported.
|
|
* @ioreset_reg: IO reset register offset. -1 if unsupported.
|
|
* @ioreset_bank: IO reset register bank. 0 if unsupported.
|
|
* @ioreset_bit: IO reset register bit. 0 if unsupported.
|
|
* @rcv_sel_reg: Receiver select offset. -1 if unsupported.
|
|
* @rcv_sel_bank: Receiver select bank. 0 if unsupported.
|
|
* @rcv_sel_bit: Receiver select bit. 0 if unsupported.
|
|
* @drv_reg: Drive fields register offset. -1 if unsupported.
|
|
* This register contains the hsm, schmitt, lpmd, drvdn,
|
|
* drvup, slwr, and slwf parameters.
|
|
* @drv_bank: Drive fields register bank. 0 if unsupported.
|
|
* @hsm_bit: High Speed Mode register bit. 0 if unsupported.
|
|
* @schmitt_bit: Scmitt register bit. 0 if unsupported.
|
|
* @lpmd_bit: Low Power Mode register bit. 0 if unsupported.
|
|
* @drvdn_bit: Drive Down register bit. 0 if unsupported.
|
|
* @drvdn_width: Drive Down field width. 0 if unsupported.
|
|
* @drvup_bit: Drive Up register bit. 0 if unsupported.
|
|
* @drvup_width: Drive Up field width. 0 if unsupported.
|
|
* @slwr_bit: Slew Rising register bit. 0 if unsupported.
|
|
* @slwr_width: Slew Rising field width. 0 if unsupported.
|
|
* @slwf_bit: Slew Falling register bit. 0 if unsupported.
|
|
* @slwf_width: Slew Falling field width. 0 if unsupported.
|
|
* @drvtype_reg: Drive type fields register offset. -1 if unsupported.
|
|
* @drvtype_bank: Drive type fields register bank. 0 if unsupported.
|
|
* @drvtype_bit: Drive type register bit. 0 if unsupported.
|
|
*
|
|
* A representation of a group of pins (possibly just one pin) in the Tegra
|
|
* pin controller. Each group allows some parameter or parameters to be
|
|
* configured. The most common is mux function selection. Many others exist
|
|
* such as pull-up/down, tri-state, etc. Tegra's pin controller is complex;
|
|
* certain groups may only support configuring certain parameters, hence
|
|
* each parameter is optional, represented by a -1 "reg" value.
|
|
*/
|
|
struct tegra_pingroup {
|
|
const char *name;
|
|
const unsigned *pins;
|
|
unsigned npins;
|
|
unsigned funcs[4];
|
|
unsigned func_safe;
|
|
s16 mux_reg;
|
|
s16 pupd_reg;
|
|
s16 tri_reg;
|
|
s16 einput_reg;
|
|
s16 odrain_reg;
|
|
s16 lock_reg;
|
|
s16 ioreset_reg;
|
|
s16 rcv_sel_reg;
|
|
s16 drv_reg;
|
|
s16 drvtype_reg;
|
|
u32 mux_bank:2;
|
|
u32 pupd_bank:2;
|
|
u32 tri_bank:2;
|
|
u32 einput_bank:2;
|
|
u32 odrain_bank:2;
|
|
u32 ioreset_bank:2;
|
|
u32 rcv_sel_bank:2;
|
|
u32 lock_bank:2;
|
|
u32 drv_bank:2;
|
|
u32 drvtype_bank:2;
|
|
u32 mux_bit:5;
|
|
u32 pupd_bit:5;
|
|
u32 tri_bit:5;
|
|
u32 einput_bit:5;
|
|
u32 odrain_bit:5;
|
|
u32 lock_bit:5;
|
|
u32 ioreset_bit:5;
|
|
u32 rcv_sel_bit:5;
|
|
u32 hsm_bit:5;
|
|
u32 schmitt_bit:5;
|
|
u32 lpmd_bit:5;
|
|
u32 drvdn_bit:5;
|
|
u32 drvup_bit:5;
|
|
u32 slwr_bit:5;
|
|
u32 slwf_bit:5;
|
|
u32 drvtype_bit:5;
|
|
u32 drvdn_width:6;
|
|
u32 drvup_width:6;
|
|
u32 slwr_width:6;
|
|
u32 slwf_width:6;
|
|
};
|
|
|
|
/**
|
|
* struct tegra_pinctrl_soc_data - Tegra pin controller driver configuration
|
|
* @ngpios: The number of GPIO pins the pin controller HW affects.
|
|
* @pins: An array describing all pins the pin controller affects.
|
|
* All pins which are also GPIOs must be listed first within the
|
|
* array, and be numbered identically to the GPIO controller's
|
|
* numbering.
|
|
* @npins: The numbmer of entries in @pins.
|
|
* @functions: An array describing all mux functions the SoC supports.
|
|
* @nfunctions: The numbmer of entries in @functions.
|
|
* @groups: An array describing all pin groups the pin SoC supports.
|
|
* @ngroups: The numbmer of entries in @groups.
|
|
*/
|
|
struct tegra_pinctrl_soc_data {
|
|
unsigned ngpios;
|
|
const struct pinctrl_pin_desc *pins;
|
|
unsigned npins;
|
|
const struct tegra_function *functions;
|
|
unsigned nfunctions;
|
|
const struct tegra_pingroup *groups;
|
|
unsigned ngroups;
|
|
};
|
|
|
|
int tegra_pinctrl_probe(struct platform_device *pdev,
|
|
const struct tegra_pinctrl_soc_data *soc_data);
|
|
int tegra_pinctrl_remove(struct platform_device *pdev);
|
|
|
|
#endif
|