mirror of
https://github.com/torvalds/linux.git
synced 2024-12-13 22:53:20 +00:00
3b770017b0
On Gen3, we can only do RXDMA once per transfer reliably. For that, we must reset the device, then we can have RXDMA once. This patch implements this. When there is no reset controller or the reset fails, RXDMA will be blocked completely. Otherwise, it will be disabled after the first RXDMA transfer. Based on a commit from the BSP by Hiromitsu Yamasaki, yet completely refactored to handle multiple read messages within one transfer. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
1031 lines
26 KiB
C
1031 lines
26 KiB
C
/*
|
|
* Driver for the Renesas R-Car I2C unit
|
|
*
|
|
* Copyright (C) 2014-15 Wolfram Sang <wsa@sang-engineering.com>
|
|
* Copyright (C) 2011-2015 Renesas Electronics Corporation
|
|
*
|
|
* Copyright (C) 2012-14 Renesas Solutions Corp.
|
|
* Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
|
|
*
|
|
* This file is based on the drivers/i2c/busses/i2c-sh7760.c
|
|
* (c) 2005-2008 MSC Vertriebsges.m.b.H, Manuel Lauss <mlau@msc-ge.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/err.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/slab.h>
|
|
|
|
/* register offsets */
|
|
#define ICSCR 0x00 /* slave ctrl */
|
|
#define ICMCR 0x04 /* master ctrl */
|
|
#define ICSSR 0x08 /* slave status */
|
|
#define ICMSR 0x0C /* master status */
|
|
#define ICSIER 0x10 /* slave irq enable */
|
|
#define ICMIER 0x14 /* master irq enable */
|
|
#define ICCCR 0x18 /* clock dividers */
|
|
#define ICSAR 0x1C /* slave address */
|
|
#define ICMAR 0x20 /* master address */
|
|
#define ICRXTX 0x24 /* data port */
|
|
#define ICDMAER 0x3c /* DMA enable */
|
|
#define ICFBSCR 0x38 /* first bit setup cycle */
|
|
|
|
/* ICSCR */
|
|
#define SDBS (1 << 3) /* slave data buffer select */
|
|
#define SIE (1 << 2) /* slave interface enable */
|
|
#define GCAE (1 << 1) /* general call address enable */
|
|
#define FNA (1 << 0) /* forced non acknowledgment */
|
|
|
|
/* ICMCR */
|
|
#define MDBS (1 << 7) /* non-fifo mode switch */
|
|
#define FSCL (1 << 6) /* override SCL pin */
|
|
#define FSDA (1 << 5) /* override SDA pin */
|
|
#define OBPC (1 << 4) /* override pins */
|
|
#define MIE (1 << 3) /* master if enable */
|
|
#define TSBE (1 << 2)
|
|
#define FSB (1 << 1) /* force stop bit */
|
|
#define ESG (1 << 0) /* enable start bit gen */
|
|
|
|
/* ICSSR (also for ICSIER) */
|
|
#define GCAR (1 << 6) /* general call received */
|
|
#define STM (1 << 5) /* slave transmit mode */
|
|
#define SSR (1 << 4) /* stop received */
|
|
#define SDE (1 << 3) /* slave data empty */
|
|
#define SDT (1 << 2) /* slave data transmitted */
|
|
#define SDR (1 << 1) /* slave data received */
|
|
#define SAR (1 << 0) /* slave addr received */
|
|
|
|
/* ICMSR (also for ICMIE) */
|
|
#define MNR (1 << 6) /* nack received */
|
|
#define MAL (1 << 5) /* arbitration lost */
|
|
#define MST (1 << 4) /* sent a stop */
|
|
#define MDE (1 << 3)
|
|
#define MDT (1 << 2)
|
|
#define MDR (1 << 1)
|
|
#define MAT (1 << 0) /* slave addr xfer done */
|
|
|
|
/* ICDMAER */
|
|
#define RSDMAE (1 << 3) /* DMA Slave Received Enable */
|
|
#define TSDMAE (1 << 2) /* DMA Slave Transmitted Enable */
|
|
#define RMDMAE (1 << 1) /* DMA Master Received Enable */
|
|
#define TMDMAE (1 << 0) /* DMA Master Transmitted Enable */
|
|
|
|
/* ICFBSCR */
|
|
#define TCYC06 0x04 /* 6*Tcyc delay 1st bit between SDA and SCL */
|
|
#define TCYC17 0x0f /* 17*Tcyc delay 1st bit between SDA and SCL */
|
|
|
|
|
|
#define RCAR_BUS_PHASE_START (MDBS | MIE | ESG)
|
|
#define RCAR_BUS_PHASE_DATA (MDBS | MIE)
|
|
#define RCAR_BUS_MASK_DATA (~(ESG | FSB) & 0xFF)
|
|
#define RCAR_BUS_PHASE_STOP (MDBS | MIE | FSB)
|
|
|
|
#define RCAR_IRQ_SEND (MNR | MAL | MST | MAT | MDE)
|
|
#define RCAR_IRQ_RECV (MNR | MAL | MST | MAT | MDR)
|
|
#define RCAR_IRQ_STOP (MST)
|
|
|
|
#define RCAR_IRQ_ACK_SEND (~(MAT | MDE) & 0x7F)
|
|
#define RCAR_IRQ_ACK_RECV (~(MAT | MDR) & 0x7F)
|
|
|
|
#define ID_LAST_MSG (1 << 0)
|
|
#define ID_FIRST_MSG (1 << 1)
|
|
#define ID_DONE (1 << 2)
|
|
#define ID_ARBLOST (1 << 3)
|
|
#define ID_NACK (1 << 4)
|
|
/* persistent flags */
|
|
#define ID_P_NO_RXDMA (1 << 30) /* HW forbids RXDMA sometimes */
|
|
#define ID_P_PM_BLOCKED (1 << 31)
|
|
#define ID_P_MASK (ID_P_PM_BLOCKED | ID_P_NO_RXDMA)
|
|
|
|
enum rcar_i2c_type {
|
|
I2C_RCAR_GEN1,
|
|
I2C_RCAR_GEN2,
|
|
I2C_RCAR_GEN3,
|
|
};
|
|
|
|
struct rcar_i2c_priv {
|
|
void __iomem *io;
|
|
struct i2c_adapter adap;
|
|
struct i2c_msg *msg;
|
|
int msgs_left;
|
|
struct clk *clk;
|
|
|
|
wait_queue_head_t wait;
|
|
|
|
int pos;
|
|
u32 icccr;
|
|
u32 flags;
|
|
u8 recovery_icmcr; /* protected by adapter lock */
|
|
enum rcar_i2c_type devtype;
|
|
struct i2c_client *slave;
|
|
|
|
struct resource *res;
|
|
struct dma_chan *dma_tx;
|
|
struct dma_chan *dma_rx;
|
|
struct scatterlist sg;
|
|
enum dma_data_direction dma_direction;
|
|
|
|
struct reset_control *rstc;
|
|
};
|
|
|
|
#define rcar_i2c_priv_to_dev(p) ((p)->adap.dev.parent)
|
|
#define rcar_i2c_is_recv(p) ((p)->msg->flags & I2C_M_RD)
|
|
|
|
#define LOOP_TIMEOUT 1024
|
|
|
|
|
|
static void rcar_i2c_write(struct rcar_i2c_priv *priv, int reg, u32 val)
|
|
{
|
|
writel(val, priv->io + reg);
|
|
}
|
|
|
|
static u32 rcar_i2c_read(struct rcar_i2c_priv *priv, int reg)
|
|
{
|
|
return readl(priv->io + reg);
|
|
}
|
|
|
|
static int rcar_i2c_get_scl(struct i2c_adapter *adap)
|
|
{
|
|
struct rcar_i2c_priv *priv = i2c_get_adapdata(adap);
|
|
|
|
return !!(rcar_i2c_read(priv, ICMCR) & FSCL);
|
|
|
|
};
|
|
|
|
static void rcar_i2c_set_scl(struct i2c_adapter *adap, int val)
|
|
{
|
|
struct rcar_i2c_priv *priv = i2c_get_adapdata(adap);
|
|
|
|
if (val)
|
|
priv->recovery_icmcr |= FSCL;
|
|
else
|
|
priv->recovery_icmcr &= ~FSCL;
|
|
|
|
rcar_i2c_write(priv, ICMCR, priv->recovery_icmcr);
|
|
};
|
|
|
|
static void rcar_i2c_set_sda(struct i2c_adapter *adap, int val)
|
|
{
|
|
struct rcar_i2c_priv *priv = i2c_get_adapdata(adap);
|
|
|
|
if (val)
|
|
priv->recovery_icmcr |= FSDA;
|
|
else
|
|
priv->recovery_icmcr &= ~FSDA;
|
|
|
|
rcar_i2c_write(priv, ICMCR, priv->recovery_icmcr);
|
|
};
|
|
|
|
static int rcar_i2c_get_bus_free(struct i2c_adapter *adap)
|
|
{
|
|
struct rcar_i2c_priv *priv = i2c_get_adapdata(adap);
|
|
|
|
return !(rcar_i2c_read(priv, ICMCR) & FSDA);
|
|
|
|
};
|
|
|
|
static struct i2c_bus_recovery_info rcar_i2c_bri = {
|
|
.get_scl = rcar_i2c_get_scl,
|
|
.set_scl = rcar_i2c_set_scl,
|
|
.set_sda = rcar_i2c_set_sda,
|
|
.get_bus_free = rcar_i2c_get_bus_free,
|
|
.recover_bus = i2c_generic_scl_recovery,
|
|
};
|
|
static void rcar_i2c_init(struct rcar_i2c_priv *priv)
|
|
{
|
|
/* reset master mode */
|
|
rcar_i2c_write(priv, ICMIER, 0);
|
|
rcar_i2c_write(priv, ICMCR, MDBS);
|
|
rcar_i2c_write(priv, ICMSR, 0);
|
|
/* start clock */
|
|
rcar_i2c_write(priv, ICCCR, priv->icccr);
|
|
}
|
|
|
|
static int rcar_i2c_bus_barrier(struct rcar_i2c_priv *priv)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < LOOP_TIMEOUT; i++) {
|
|
/* make sure that bus is not busy */
|
|
if (!(rcar_i2c_read(priv, ICMCR) & FSDA))
|
|
return 0;
|
|
udelay(1);
|
|
}
|
|
|
|
/* Waiting did not help, try to recover */
|
|
priv->recovery_icmcr = MDBS | OBPC | FSDA | FSCL;
|
|
return i2c_recover_bus(&priv->adap);
|
|
}
|
|
|
|
static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, struct i2c_timings *t)
|
|
{
|
|
u32 scgd, cdf, round, ick, sum, scl, cdf_width;
|
|
unsigned long rate;
|
|
struct device *dev = rcar_i2c_priv_to_dev(priv);
|
|
|
|
/* Fall back to previously used values if not supplied */
|
|
t->bus_freq_hz = t->bus_freq_hz ?: 100000;
|
|
t->scl_fall_ns = t->scl_fall_ns ?: 35;
|
|
t->scl_rise_ns = t->scl_rise_ns ?: 200;
|
|
t->scl_int_delay_ns = t->scl_int_delay_ns ?: 50;
|
|
|
|
switch (priv->devtype) {
|
|
case I2C_RCAR_GEN1:
|
|
cdf_width = 2;
|
|
break;
|
|
case I2C_RCAR_GEN2:
|
|
case I2C_RCAR_GEN3:
|
|
cdf_width = 3;
|
|
break;
|
|
default:
|
|
dev_err(dev, "device type error\n");
|
|
return -EIO;
|
|
}
|
|
|
|
/*
|
|
* calculate SCL clock
|
|
* see
|
|
* ICCCR
|
|
*
|
|
* ick = clkp / (1 + CDF)
|
|
* SCL = ick / (20 + SCGD * 8 + F[(ticf + tr + intd) * ick])
|
|
*
|
|
* ick : I2C internal clock < 20 MHz
|
|
* ticf : I2C SCL falling time
|
|
* tr : I2C SCL rising time
|
|
* intd : LSI internal delay
|
|
* clkp : peripheral_clk
|
|
* F[] : integer up-valuation
|
|
*/
|
|
rate = clk_get_rate(priv->clk);
|
|
cdf = rate / 20000000;
|
|
if (cdf >= 1U << cdf_width) {
|
|
dev_err(dev, "Input clock %lu too high\n", rate);
|
|
return -EIO;
|
|
}
|
|
ick = rate / (cdf + 1);
|
|
|
|
/*
|
|
* it is impossible to calculate large scale
|
|
* number on u32. separate it
|
|
*
|
|
* F[(ticf + tr + intd) * ick] with sum = (ticf + tr + intd)
|
|
* = F[sum * ick / 1000000000]
|
|
* = F[(ick / 1000000) * sum / 1000]
|
|
*/
|
|
sum = t->scl_fall_ns + t->scl_rise_ns + t->scl_int_delay_ns;
|
|
round = (ick + 500000) / 1000000 * sum;
|
|
round = (round + 500) / 1000;
|
|
|
|
/*
|
|
* SCL = ick / (20 + SCGD * 8 + F[(ticf + tr + intd) * ick])
|
|
*
|
|
* Calculation result (= SCL) should be less than
|
|
* bus_speed for hardware safety
|
|
*
|
|
* We could use something along the lines of
|
|
* div = ick / (bus_speed + 1) + 1;
|
|
* scgd = (div - 20 - round + 7) / 8;
|
|
* scl = ick / (20 + (scgd * 8) + round);
|
|
* (not fully verified) but that would get pretty involved
|
|
*/
|
|
for (scgd = 0; scgd < 0x40; scgd++) {
|
|
scl = ick / (20 + (scgd * 8) + round);
|
|
if (scl <= t->bus_freq_hz)
|
|
goto scgd_find;
|
|
}
|
|
dev_err(dev, "it is impossible to calculate best SCL\n");
|
|
return -EIO;
|
|
|
|
scgd_find:
|
|
dev_dbg(dev, "clk %d/%d(%lu), round %u, CDF:0x%x, SCGD: 0x%x\n",
|
|
scl, t->bus_freq_hz, clk_get_rate(priv->clk), round, cdf, scgd);
|
|
|
|
/* keep icccr value */
|
|
priv->icccr = scgd << cdf_width | cdf;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rcar_i2c_prepare_msg(struct rcar_i2c_priv *priv)
|
|
{
|
|
int read = !!rcar_i2c_is_recv(priv);
|
|
|
|
priv->pos = 0;
|
|
if (priv->msgs_left == 1)
|
|
priv->flags |= ID_LAST_MSG;
|
|
|
|
rcar_i2c_write(priv, ICMAR, i2c_8bit_addr_from_msg(priv->msg));
|
|
/*
|
|
* We don't have a test case but the HW engineers say that the write order
|
|
* of ICMSR and ICMCR depends on whether we issue START or REP_START. Since
|
|
* it didn't cause a drawback for me, let's rather be safe than sorry.
|
|
*/
|
|
if (priv->flags & ID_FIRST_MSG) {
|
|
rcar_i2c_write(priv, ICMSR, 0);
|
|
rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_START);
|
|
} else {
|
|
rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_START);
|
|
rcar_i2c_write(priv, ICMSR, 0);
|
|
}
|
|
rcar_i2c_write(priv, ICMIER, read ? RCAR_IRQ_RECV : RCAR_IRQ_SEND);
|
|
}
|
|
|
|
static void rcar_i2c_next_msg(struct rcar_i2c_priv *priv)
|
|
{
|
|
priv->msg++;
|
|
priv->msgs_left--;
|
|
priv->flags &= ID_P_MASK;
|
|
rcar_i2c_prepare_msg(priv);
|
|
}
|
|
|
|
/*
|
|
* interrupt functions
|
|
*/
|
|
static void rcar_i2c_dma_unmap(struct rcar_i2c_priv *priv)
|
|
{
|
|
struct dma_chan *chan = priv->dma_direction == DMA_FROM_DEVICE
|
|
? priv->dma_rx : priv->dma_tx;
|
|
|
|
/* Disable DMA Master Received/Transmitted */
|
|
rcar_i2c_write(priv, ICDMAER, 0);
|
|
|
|
/* Reset default delay */
|
|
rcar_i2c_write(priv, ICFBSCR, TCYC06);
|
|
|
|
dma_unmap_single(chan->device->dev, sg_dma_address(&priv->sg),
|
|
sg_dma_len(&priv->sg), priv->dma_direction);
|
|
|
|
/* Gen3 can only do one RXDMA per transfer and we just completed it */
|
|
if (priv->devtype == I2C_RCAR_GEN3 &&
|
|
priv->dma_direction == DMA_FROM_DEVICE)
|
|
priv->flags |= ID_P_NO_RXDMA;
|
|
|
|
priv->dma_direction = DMA_NONE;
|
|
}
|
|
|
|
static void rcar_i2c_cleanup_dma(struct rcar_i2c_priv *priv)
|
|
{
|
|
if (priv->dma_direction == DMA_NONE)
|
|
return;
|
|
else if (priv->dma_direction == DMA_FROM_DEVICE)
|
|
dmaengine_terminate_all(priv->dma_rx);
|
|
else if (priv->dma_direction == DMA_TO_DEVICE)
|
|
dmaengine_terminate_all(priv->dma_tx);
|
|
|
|
rcar_i2c_dma_unmap(priv);
|
|
}
|
|
|
|
static void rcar_i2c_dma_callback(void *data)
|
|
{
|
|
struct rcar_i2c_priv *priv = data;
|
|
|
|
priv->pos += sg_dma_len(&priv->sg);
|
|
|
|
rcar_i2c_dma_unmap(priv);
|
|
}
|
|
|
|
static void rcar_i2c_dma(struct rcar_i2c_priv *priv)
|
|
{
|
|
struct device *dev = rcar_i2c_priv_to_dev(priv);
|
|
struct i2c_msg *msg = priv->msg;
|
|
bool read = msg->flags & I2C_M_RD;
|
|
enum dma_data_direction dir = read ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
|
|
struct dma_chan *chan = read ? priv->dma_rx : priv->dma_tx;
|
|
struct dma_async_tx_descriptor *txdesc;
|
|
dma_addr_t dma_addr;
|
|
dma_cookie_t cookie;
|
|
unsigned char *buf;
|
|
int len;
|
|
|
|
/* Do various checks to see if DMA is feasible at all */
|
|
if (IS_ERR(chan) || msg->len < 8 || !(msg->flags & I2C_M_DMA_SAFE) ||
|
|
(read && priv->flags & ID_P_NO_RXDMA))
|
|
return;
|
|
|
|
if (read) {
|
|
/*
|
|
* The last two bytes needs to be fetched using PIO in
|
|
* order for the STOP phase to work.
|
|
*/
|
|
buf = priv->msg->buf;
|
|
len = priv->msg->len - 2;
|
|
} else {
|
|
/*
|
|
* First byte in message was sent using PIO.
|
|
*/
|
|
buf = priv->msg->buf + 1;
|
|
len = priv->msg->len - 1;
|
|
}
|
|
|
|
dma_addr = dma_map_single(chan->device->dev, buf, len, dir);
|
|
if (dma_mapping_error(chan->device->dev, dma_addr)) {
|
|
dev_dbg(dev, "dma map failed, using PIO\n");
|
|
return;
|
|
}
|
|
|
|
sg_dma_len(&priv->sg) = len;
|
|
sg_dma_address(&priv->sg) = dma_addr;
|
|
|
|
priv->dma_direction = dir;
|
|
|
|
txdesc = dmaengine_prep_slave_sg(chan, &priv->sg, 1,
|
|
read ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV,
|
|
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
|
|
if (!txdesc) {
|
|
dev_dbg(dev, "dma prep slave sg failed, using PIO\n");
|
|
rcar_i2c_cleanup_dma(priv);
|
|
return;
|
|
}
|
|
|
|
txdesc->callback = rcar_i2c_dma_callback;
|
|
txdesc->callback_param = priv;
|
|
|
|
cookie = dmaengine_submit(txdesc);
|
|
if (dma_submit_error(cookie)) {
|
|
dev_dbg(dev, "submitting dma failed, using PIO\n");
|
|
rcar_i2c_cleanup_dma(priv);
|
|
return;
|
|
}
|
|
|
|
/* Set delay for DMA operations */
|
|
rcar_i2c_write(priv, ICFBSCR, TCYC17);
|
|
|
|
/* Enable DMA Master Received/Transmitted */
|
|
if (read)
|
|
rcar_i2c_write(priv, ICDMAER, RMDMAE);
|
|
else
|
|
rcar_i2c_write(priv, ICDMAER, TMDMAE);
|
|
|
|
dma_async_issue_pending(chan);
|
|
}
|
|
|
|
static void rcar_i2c_irq_send(struct rcar_i2c_priv *priv, u32 msr)
|
|
{
|
|
struct i2c_msg *msg = priv->msg;
|
|
|
|
/* FIXME: sometimes, unknown interrupt happened. Do nothing */
|
|
if (!(msr & MDE))
|
|
return;
|
|
|
|
if (priv->pos < msg->len) {
|
|
/*
|
|
* Prepare next data to ICRXTX register.
|
|
* This data will go to _SHIFT_ register.
|
|
*
|
|
* *
|
|
* [ICRXTX] -> [SHIFT] -> [I2C bus]
|
|
*/
|
|
rcar_i2c_write(priv, ICRXTX, msg->buf[priv->pos]);
|
|
priv->pos++;
|
|
|
|
/*
|
|
* Try to use DMA to transmit the rest of the data if
|
|
* address transfer phase just finished.
|
|
*/
|
|
if (msr & MAT)
|
|
rcar_i2c_dma(priv);
|
|
} else {
|
|
/*
|
|
* The last data was pushed to ICRXTX on _PREV_ empty irq.
|
|
* It is on _SHIFT_ register, and will sent to I2C bus.
|
|
*
|
|
* *
|
|
* [ICRXTX] -> [SHIFT] -> [I2C bus]
|
|
*/
|
|
|
|
if (priv->flags & ID_LAST_MSG) {
|
|
/*
|
|
* If current msg is the _LAST_ msg,
|
|
* prepare stop condition here.
|
|
* ID_DONE will be set on STOP irq.
|
|
*/
|
|
rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_STOP);
|
|
} else {
|
|
rcar_i2c_next_msg(priv);
|
|
return;
|
|
}
|
|
}
|
|
|
|
rcar_i2c_write(priv, ICMSR, RCAR_IRQ_ACK_SEND);
|
|
}
|
|
|
|
static void rcar_i2c_irq_recv(struct rcar_i2c_priv *priv, u32 msr)
|
|
{
|
|
struct i2c_msg *msg = priv->msg;
|
|
|
|
/* FIXME: sometimes, unknown interrupt happened. Do nothing */
|
|
if (!(msr & MDR))
|
|
return;
|
|
|
|
if (msr & MAT) {
|
|
/*
|
|
* Address transfer phase finished, but no data at this point.
|
|
* Try to use DMA to receive data.
|
|
*/
|
|
rcar_i2c_dma(priv);
|
|
} else if (priv->pos < msg->len) {
|
|
/* get received data */
|
|
msg->buf[priv->pos] = rcar_i2c_read(priv, ICRXTX);
|
|
priv->pos++;
|
|
}
|
|
|
|
/*
|
|
* If next received data is the _LAST_, go to STOP phase. Might be
|
|
* overwritten by REP START when setting up a new msg. Not elegant
|
|
* but the only stable sequence for REP START I have found so far.
|
|
* If you want to change this code, make sure sending one transfer with
|
|
* four messages (WR-RD-WR-RD) works!
|
|
*/
|
|
if (priv->pos + 1 >= msg->len)
|
|
rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_STOP);
|
|
|
|
if (priv->pos == msg->len && !(priv->flags & ID_LAST_MSG))
|
|
rcar_i2c_next_msg(priv);
|
|
else
|
|
rcar_i2c_write(priv, ICMSR, RCAR_IRQ_ACK_RECV);
|
|
}
|
|
|
|
static bool rcar_i2c_slave_irq(struct rcar_i2c_priv *priv)
|
|
{
|
|
u32 ssr_raw, ssr_filtered;
|
|
u8 value;
|
|
|
|
ssr_raw = rcar_i2c_read(priv, ICSSR) & 0xff;
|
|
ssr_filtered = ssr_raw & rcar_i2c_read(priv, ICSIER);
|
|
|
|
if (!ssr_filtered)
|
|
return false;
|
|
|
|
/* address detected */
|
|
if (ssr_filtered & SAR) {
|
|
/* read or write request */
|
|
if (ssr_raw & STM) {
|
|
i2c_slave_event(priv->slave, I2C_SLAVE_READ_REQUESTED, &value);
|
|
rcar_i2c_write(priv, ICRXTX, value);
|
|
rcar_i2c_write(priv, ICSIER, SDE | SSR | SAR);
|
|
} else {
|
|
i2c_slave_event(priv->slave, I2C_SLAVE_WRITE_REQUESTED, &value);
|
|
rcar_i2c_read(priv, ICRXTX); /* dummy read */
|
|
rcar_i2c_write(priv, ICSIER, SDR | SSR | SAR);
|
|
}
|
|
|
|
rcar_i2c_write(priv, ICSSR, ~SAR & 0xff);
|
|
}
|
|
|
|
/* master sent stop */
|
|
if (ssr_filtered & SSR) {
|
|
i2c_slave_event(priv->slave, I2C_SLAVE_STOP, &value);
|
|
rcar_i2c_write(priv, ICSIER, SAR | SSR);
|
|
rcar_i2c_write(priv, ICSSR, ~SSR & 0xff);
|
|
}
|
|
|
|
/* master wants to write to us */
|
|
if (ssr_filtered & SDR) {
|
|
int ret;
|
|
|
|
value = rcar_i2c_read(priv, ICRXTX);
|
|
ret = i2c_slave_event(priv->slave, I2C_SLAVE_WRITE_RECEIVED, &value);
|
|
/* Send NACK in case of error */
|
|
rcar_i2c_write(priv, ICSCR, SIE | SDBS | (ret < 0 ? FNA : 0));
|
|
rcar_i2c_write(priv, ICSSR, ~SDR & 0xff);
|
|
}
|
|
|
|
/* master wants to read from us */
|
|
if (ssr_filtered & SDE) {
|
|
i2c_slave_event(priv->slave, I2C_SLAVE_READ_PROCESSED, &value);
|
|
rcar_i2c_write(priv, ICRXTX, value);
|
|
rcar_i2c_write(priv, ICSSR, ~SDE & 0xff);
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static irqreturn_t rcar_i2c_irq(int irq, void *ptr)
|
|
{
|
|
struct rcar_i2c_priv *priv = ptr;
|
|
u32 msr, val;
|
|
|
|
/* Clear START or STOP as soon as we can */
|
|
val = rcar_i2c_read(priv, ICMCR);
|
|
rcar_i2c_write(priv, ICMCR, val & RCAR_BUS_MASK_DATA);
|
|
|
|
msr = rcar_i2c_read(priv, ICMSR);
|
|
|
|
/* Only handle interrupts that are currently enabled */
|
|
msr &= rcar_i2c_read(priv, ICMIER);
|
|
if (!msr) {
|
|
if (rcar_i2c_slave_irq(priv))
|
|
return IRQ_HANDLED;
|
|
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
/* Arbitration lost */
|
|
if (msr & MAL) {
|
|
priv->flags |= ID_DONE | ID_ARBLOST;
|
|
goto out;
|
|
}
|
|
|
|
/* Nack */
|
|
if (msr & MNR) {
|
|
/* HW automatically sends STOP after received NACK */
|
|
rcar_i2c_write(priv, ICMIER, RCAR_IRQ_STOP);
|
|
priv->flags |= ID_NACK;
|
|
goto out;
|
|
}
|
|
|
|
/* Stop */
|
|
if (msr & MST) {
|
|
priv->msgs_left--; /* The last message also made it */
|
|
priv->flags |= ID_DONE;
|
|
goto out;
|
|
}
|
|
|
|
if (rcar_i2c_is_recv(priv))
|
|
rcar_i2c_irq_recv(priv, msr);
|
|
else
|
|
rcar_i2c_irq_send(priv, msr);
|
|
|
|
out:
|
|
if (priv->flags & ID_DONE) {
|
|
rcar_i2c_write(priv, ICMIER, 0);
|
|
rcar_i2c_write(priv, ICMSR, 0);
|
|
wake_up(&priv->wait);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct dma_chan *rcar_i2c_request_dma_chan(struct device *dev,
|
|
enum dma_transfer_direction dir,
|
|
dma_addr_t port_addr)
|
|
{
|
|
struct dma_chan *chan;
|
|
struct dma_slave_config cfg;
|
|
char *chan_name = dir == DMA_MEM_TO_DEV ? "tx" : "rx";
|
|
int ret;
|
|
|
|
chan = dma_request_chan(dev, chan_name);
|
|
if (IS_ERR(chan)) {
|
|
dev_dbg(dev, "request_channel failed for %s (%ld)\n",
|
|
chan_name, PTR_ERR(chan));
|
|
return chan;
|
|
}
|
|
|
|
memset(&cfg, 0, sizeof(cfg));
|
|
cfg.direction = dir;
|
|
if (dir == DMA_MEM_TO_DEV) {
|
|
cfg.dst_addr = port_addr;
|
|
cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
|
|
} else {
|
|
cfg.src_addr = port_addr;
|
|
cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
|
|
}
|
|
|
|
ret = dmaengine_slave_config(chan, &cfg);
|
|
if (ret) {
|
|
dev_dbg(dev, "slave_config failed for %s (%d)\n",
|
|
chan_name, ret);
|
|
dma_release_channel(chan);
|
|
return ERR_PTR(ret);
|
|
}
|
|
|
|
dev_dbg(dev, "got DMA channel for %s\n", chan_name);
|
|
return chan;
|
|
}
|
|
|
|
static void rcar_i2c_request_dma(struct rcar_i2c_priv *priv,
|
|
struct i2c_msg *msg)
|
|
{
|
|
struct device *dev = rcar_i2c_priv_to_dev(priv);
|
|
bool read;
|
|
struct dma_chan *chan;
|
|
enum dma_transfer_direction dir;
|
|
|
|
read = msg->flags & I2C_M_RD;
|
|
|
|
chan = read ? priv->dma_rx : priv->dma_tx;
|
|
if (PTR_ERR(chan) != -EPROBE_DEFER)
|
|
return;
|
|
|
|
dir = read ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV;
|
|
chan = rcar_i2c_request_dma_chan(dev, dir, priv->res->start + ICRXTX);
|
|
|
|
if (read)
|
|
priv->dma_rx = chan;
|
|
else
|
|
priv->dma_tx = chan;
|
|
}
|
|
|
|
static void rcar_i2c_release_dma(struct rcar_i2c_priv *priv)
|
|
{
|
|
if (!IS_ERR(priv->dma_tx)) {
|
|
dma_release_channel(priv->dma_tx);
|
|
priv->dma_tx = ERR_PTR(-EPROBE_DEFER);
|
|
}
|
|
|
|
if (!IS_ERR(priv->dma_rx)) {
|
|
dma_release_channel(priv->dma_rx);
|
|
priv->dma_rx = ERR_PTR(-EPROBE_DEFER);
|
|
}
|
|
}
|
|
|
|
/* I2C is a special case, we need to poll the status of a reset */
|
|
static int rcar_i2c_do_reset(struct rcar_i2c_priv *priv)
|
|
{
|
|
int i, ret;
|
|
|
|
ret = reset_control_reset(priv->rstc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 0; i < LOOP_TIMEOUT; i++) {
|
|
ret = reset_control_status(priv->rstc);
|
|
if (ret == 0)
|
|
return 0;
|
|
udelay(1);
|
|
}
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
|
|
struct i2c_msg *msgs,
|
|
int num)
|
|
{
|
|
struct rcar_i2c_priv *priv = i2c_get_adapdata(adap);
|
|
struct device *dev = rcar_i2c_priv_to_dev(priv);
|
|
int i, ret;
|
|
long time_left;
|
|
|
|
pm_runtime_get_sync(dev);
|
|
|
|
/* Gen3 needs a reset before allowing RXDMA once */
|
|
if (priv->devtype == I2C_RCAR_GEN3) {
|
|
priv->flags |= ID_P_NO_RXDMA;
|
|
if (!IS_ERR(priv->rstc)) {
|
|
ret = rcar_i2c_do_reset(priv);
|
|
if (ret == 0)
|
|
priv->flags &= ~ID_P_NO_RXDMA;
|
|
}
|
|
}
|
|
|
|
rcar_i2c_init(priv);
|
|
|
|
ret = rcar_i2c_bus_barrier(priv);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
for (i = 0; i < num; i++) {
|
|
/* This HW can't send STOP after address phase */
|
|
if (msgs[i].len == 0) {
|
|
ret = -EOPNOTSUPP;
|
|
goto out;
|
|
}
|
|
rcar_i2c_request_dma(priv, msgs + i);
|
|
}
|
|
|
|
/* init first message */
|
|
priv->msg = msgs;
|
|
priv->msgs_left = num;
|
|
priv->flags = (priv->flags & ID_P_MASK) | ID_FIRST_MSG;
|
|
rcar_i2c_prepare_msg(priv);
|
|
|
|
time_left = wait_event_timeout(priv->wait, priv->flags & ID_DONE,
|
|
num * adap->timeout);
|
|
if (!time_left) {
|
|
rcar_i2c_cleanup_dma(priv);
|
|
rcar_i2c_init(priv);
|
|
ret = -ETIMEDOUT;
|
|
} else if (priv->flags & ID_NACK) {
|
|
ret = -ENXIO;
|
|
} else if (priv->flags & ID_ARBLOST) {
|
|
ret = -EAGAIN;
|
|
} else {
|
|
ret = num - priv->msgs_left; /* The number of transfer */
|
|
}
|
|
out:
|
|
pm_runtime_put(dev);
|
|
|
|
if (ret < 0 && ret != -ENXIO)
|
|
dev_err(dev, "error %d : %x\n", ret, priv->flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rcar_reg_slave(struct i2c_client *slave)
|
|
{
|
|
struct rcar_i2c_priv *priv = i2c_get_adapdata(slave->adapter);
|
|
|
|
if (priv->slave)
|
|
return -EBUSY;
|
|
|
|
if (slave->flags & I2C_CLIENT_TEN)
|
|
return -EAFNOSUPPORT;
|
|
|
|
/* Keep device active for slave address detection logic */
|
|
pm_runtime_get_sync(rcar_i2c_priv_to_dev(priv));
|
|
|
|
priv->slave = slave;
|
|
rcar_i2c_write(priv, ICSAR, slave->addr);
|
|
rcar_i2c_write(priv, ICSSR, 0);
|
|
rcar_i2c_write(priv, ICSIER, SAR | SSR);
|
|
rcar_i2c_write(priv, ICSCR, SIE | SDBS);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rcar_unreg_slave(struct i2c_client *slave)
|
|
{
|
|
struct rcar_i2c_priv *priv = i2c_get_adapdata(slave->adapter);
|
|
|
|
WARN_ON(!priv->slave);
|
|
|
|
rcar_i2c_write(priv, ICSIER, 0);
|
|
rcar_i2c_write(priv, ICSCR, 0);
|
|
|
|
priv->slave = NULL;
|
|
|
|
pm_runtime_put(rcar_i2c_priv_to_dev(priv));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u32 rcar_i2c_func(struct i2c_adapter *adap)
|
|
{
|
|
/*
|
|
* This HW can't do:
|
|
* I2C_SMBUS_QUICK (setting FSB during START didn't work)
|
|
* I2C_M_NOSTART (automatically sends address after START)
|
|
* I2C_M_IGNORE_NAK (automatically sends STOP after NAK)
|
|
*/
|
|
return I2C_FUNC_I2C | I2C_FUNC_SLAVE |
|
|
(I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
|
|
}
|
|
|
|
static const struct i2c_algorithm rcar_i2c_algo = {
|
|
.master_xfer = rcar_i2c_master_xfer,
|
|
.functionality = rcar_i2c_func,
|
|
.reg_slave = rcar_reg_slave,
|
|
.unreg_slave = rcar_unreg_slave,
|
|
};
|
|
|
|
static const struct of_device_id rcar_i2c_dt_ids[] = {
|
|
{ .compatible = "renesas,i2c-r8a7778", .data = (void *)I2C_RCAR_GEN1 },
|
|
{ .compatible = "renesas,i2c-r8a7779", .data = (void *)I2C_RCAR_GEN1 },
|
|
{ .compatible = "renesas,i2c-r8a7790", .data = (void *)I2C_RCAR_GEN2 },
|
|
{ .compatible = "renesas,i2c-r8a7791", .data = (void *)I2C_RCAR_GEN2 },
|
|
{ .compatible = "renesas,i2c-r8a7792", .data = (void *)I2C_RCAR_GEN2 },
|
|
{ .compatible = "renesas,i2c-r8a7793", .data = (void *)I2C_RCAR_GEN2 },
|
|
{ .compatible = "renesas,i2c-r8a7794", .data = (void *)I2C_RCAR_GEN2 },
|
|
{ .compatible = "renesas,i2c-r8a7795", .data = (void *)I2C_RCAR_GEN3 },
|
|
{ .compatible = "renesas,i2c-r8a7796", .data = (void *)I2C_RCAR_GEN3 },
|
|
{ .compatible = "renesas,i2c-rcar", .data = (void *)I2C_RCAR_GEN1 }, /* Deprecated */
|
|
{ .compatible = "renesas,rcar-gen1-i2c", .data = (void *)I2C_RCAR_GEN1 },
|
|
{ .compatible = "renesas,rcar-gen2-i2c", .data = (void *)I2C_RCAR_GEN2 },
|
|
{ .compatible = "renesas,rcar-gen3-i2c", .data = (void *)I2C_RCAR_GEN3 },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, rcar_i2c_dt_ids);
|
|
|
|
static int rcar_i2c_probe(struct platform_device *pdev)
|
|
{
|
|
struct rcar_i2c_priv *priv;
|
|
struct i2c_adapter *adap;
|
|
struct device *dev = &pdev->dev;
|
|
struct i2c_timings i2c_t;
|
|
int irq, ret;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(struct rcar_i2c_priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->clk = devm_clk_get(dev, NULL);
|
|
if (IS_ERR(priv->clk)) {
|
|
dev_err(dev, "cannot get clock\n");
|
|
return PTR_ERR(priv->clk);
|
|
}
|
|
|
|
priv->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
priv->io = devm_ioremap_resource(dev, priv->res);
|
|
if (IS_ERR(priv->io))
|
|
return PTR_ERR(priv->io);
|
|
|
|
priv->devtype = (enum rcar_i2c_type)of_device_get_match_data(dev);
|
|
init_waitqueue_head(&priv->wait);
|
|
|
|
adap = &priv->adap;
|
|
adap->nr = pdev->id;
|
|
adap->algo = &rcar_i2c_algo;
|
|
adap->class = I2C_CLASS_DEPRECATED;
|
|
adap->retries = 3;
|
|
adap->dev.parent = dev;
|
|
adap->dev.of_node = dev->of_node;
|
|
adap->bus_recovery_info = &rcar_i2c_bri;
|
|
i2c_set_adapdata(adap, priv);
|
|
strlcpy(adap->name, pdev->name, sizeof(adap->name));
|
|
|
|
i2c_parse_fw_timings(dev, &i2c_t, false);
|
|
|
|
/* Init DMA */
|
|
sg_init_table(&priv->sg, 1);
|
|
priv->dma_direction = DMA_NONE;
|
|
priv->dma_rx = priv->dma_tx = ERR_PTR(-EPROBE_DEFER);
|
|
|
|
/* Activate device for clock calculation */
|
|
pm_runtime_enable(dev);
|
|
pm_runtime_get_sync(dev);
|
|
ret = rcar_i2c_clock_calculate(priv, &i2c_t);
|
|
if (ret < 0)
|
|
goto out_pm_put;
|
|
|
|
if (priv->devtype == I2C_RCAR_GEN3) {
|
|
priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
|
|
if (!IS_ERR(priv->rstc)) {
|
|
ret = reset_control_status(priv->rstc);
|
|
if (ret < 0)
|
|
priv->rstc = ERR_PTR(-ENOTSUPP);
|
|
}
|
|
}
|
|
|
|
/* Stay always active when multi-master to keep arbitration working */
|
|
if (of_property_read_bool(dev->of_node, "multi-master"))
|
|
priv->flags |= ID_P_PM_BLOCKED;
|
|
else
|
|
pm_runtime_put(dev);
|
|
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
ret = devm_request_irq(dev, irq, rcar_i2c_irq, 0, dev_name(dev), priv);
|
|
if (ret < 0) {
|
|
dev_err(dev, "cannot get irq %d\n", irq);
|
|
goto out_pm_disable;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, priv);
|
|
|
|
ret = i2c_add_numbered_adapter(adap);
|
|
if (ret < 0)
|
|
goto out_pm_disable;
|
|
|
|
dev_info(dev, "probed\n");
|
|
|
|
return 0;
|
|
|
|
out_pm_put:
|
|
pm_runtime_put(dev);
|
|
out_pm_disable:
|
|
pm_runtime_disable(dev);
|
|
return ret;
|
|
}
|
|
|
|
static int rcar_i2c_remove(struct platform_device *pdev)
|
|
{
|
|
struct rcar_i2c_priv *priv = platform_get_drvdata(pdev);
|
|
struct device *dev = &pdev->dev;
|
|
|
|
i2c_del_adapter(&priv->adap);
|
|
rcar_i2c_release_dma(priv);
|
|
if (priv->flags & ID_P_PM_BLOCKED)
|
|
pm_runtime_put(dev);
|
|
pm_runtime_disable(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver rcar_i2c_driver = {
|
|
.driver = {
|
|
.name = "i2c-rcar",
|
|
.of_match_table = rcar_i2c_dt_ids,
|
|
},
|
|
.probe = rcar_i2c_probe,
|
|
.remove = rcar_i2c_remove,
|
|
};
|
|
|
|
module_platform_driver(rcar_i2c_driver);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("Renesas R-Car I2C bus driver");
|
|
MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>");
|