mirror of
https://github.com/torvalds/linux.git
synced 2024-11-24 05:02:12 +00:00
aba11fc50c
If we have an L2CSR register (e500mc) we need to flush the L2 before going to nap. We use the HW flush mechanism provided in that register. The code reuses the CPU_FTR_604_PERF_MON bit as it is no longer used by any code in the kernel. Additionally we didn't reuse the exist L2CR feature bit as this is intended for the 7xxx L2CR register and L2CSR is part of the new Freescale "Book-E" registers. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
502 lines
25 KiB
C
502 lines
25 KiB
C
/*
|
|
* Contains register definitions common to the Book E PowerPC
|
|
* specification. Notice that while the IBM-40x series of CPUs
|
|
* are not true Book E PowerPCs, they borrowed a number of features
|
|
* before Book E was finalized, and are included here as well. Unfortunatly,
|
|
* they sometimes used different locations than true Book E CPUs did.
|
|
*/
|
|
#ifdef __KERNEL__
|
|
#ifndef __ASM_POWERPC_REG_BOOKE_H__
|
|
#define __ASM_POWERPC_REG_BOOKE_H__
|
|
|
|
/* Machine State Register (MSR) Fields */
|
|
#define MSR_UCLE (1<<26) /* User-mode cache lock enable */
|
|
#define MSR_SPE (1<<25) /* Enable SPE */
|
|
#define MSR_DWE (1<<10) /* Debug Wait Enable */
|
|
#define MSR_UBLE (1<<10) /* BTB lock enable (e500) */
|
|
#define MSR_IS MSR_IR /* Instruction Space */
|
|
#define MSR_DS MSR_DR /* Data Space */
|
|
#define MSR_PMM (1<<2) /* Performance monitor mark bit */
|
|
|
|
/* Default MSR for kernel mode. */
|
|
#if defined (CONFIG_40x)
|
|
#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE)
|
|
#elif defined(CONFIG_BOOKE)
|
|
#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_CE)
|
|
#endif
|
|
|
|
/* Special Purpose Registers (SPRNs)*/
|
|
#define SPRN_DECAR 0x036 /* Decrementer Auto Reload Register */
|
|
#define SPRN_IVPR 0x03F /* Interrupt Vector Prefix Register */
|
|
#define SPRN_USPRG0 0x100 /* User Special Purpose Register General 0 */
|
|
#define SPRN_SPRG4R 0x104 /* Special Purpose Register General 4 Read */
|
|
#define SPRN_SPRG5R 0x105 /* Special Purpose Register General 5 Read */
|
|
#define SPRN_SPRG6R 0x106 /* Special Purpose Register General 6 Read */
|
|
#define SPRN_SPRG7R 0x107 /* Special Purpose Register General 7 Read */
|
|
#define SPRN_SPRG4W 0x114 /* Special Purpose Register General 4 Write */
|
|
#define SPRN_SPRG5W 0x115 /* Special Purpose Register General 5 Write */
|
|
#define SPRN_SPRG6W 0x116 /* Special Purpose Register General 6 Write */
|
|
#define SPRN_SPRG7W 0x117 /* Special Purpose Register General 7 Write */
|
|
#define SPRN_DBCR2 0x136 /* Debug Control Register 2 */
|
|
#define SPRN_IAC3 0x13A /* Instruction Address Compare 3 */
|
|
#define SPRN_IAC4 0x13B /* Instruction Address Compare 4 */
|
|
#define SPRN_DVC1 0x13E /* Data Value Compare Register 1 */
|
|
#define SPRN_DVC2 0x13F /* Data Value Compare Register 2 */
|
|
#define SPRN_IVOR0 0x190 /* Interrupt Vector Offset Register 0 */
|
|
#define SPRN_IVOR1 0x191 /* Interrupt Vector Offset Register 1 */
|
|
#define SPRN_IVOR2 0x192 /* Interrupt Vector Offset Register 2 */
|
|
#define SPRN_IVOR3 0x193 /* Interrupt Vector Offset Register 3 */
|
|
#define SPRN_IVOR4 0x194 /* Interrupt Vector Offset Register 4 */
|
|
#define SPRN_IVOR5 0x195 /* Interrupt Vector Offset Register 5 */
|
|
#define SPRN_IVOR6 0x196 /* Interrupt Vector Offset Register 6 */
|
|
#define SPRN_IVOR7 0x197 /* Interrupt Vector Offset Register 7 */
|
|
#define SPRN_IVOR8 0x198 /* Interrupt Vector Offset Register 8 */
|
|
#define SPRN_IVOR9 0x199 /* Interrupt Vector Offset Register 9 */
|
|
#define SPRN_IVOR10 0x19A /* Interrupt Vector Offset Register 10 */
|
|
#define SPRN_IVOR11 0x19B /* Interrupt Vector Offset Register 11 */
|
|
#define SPRN_IVOR12 0x19C /* Interrupt Vector Offset Register 12 */
|
|
#define SPRN_IVOR13 0x19D /* Interrupt Vector Offset Register 13 */
|
|
#define SPRN_IVOR14 0x19E /* Interrupt Vector Offset Register 14 */
|
|
#define SPRN_IVOR15 0x19F /* Interrupt Vector Offset Register 15 */
|
|
#define SPRN_SPEFSCR 0x200 /* SPE & Embedded FP Status & Control */
|
|
#define SPRN_BBEAR 0x201 /* Branch Buffer Entry Address Register */
|
|
#define SPRN_BBTAR 0x202 /* Branch Buffer Target Address Register */
|
|
#define SPRN_L1CFG0 0x203 /* L1 Cache Configure Register 0 */
|
|
#define SPRN_L1CFG1 0x204 /* L1 Cache Configure Register 1 */
|
|
#define SPRN_ATB 0x20E /* Alternate Time Base */
|
|
#define SPRN_ATBL 0x20E /* Alternate Time Base Lower */
|
|
#define SPRN_ATBU 0x20F /* Alternate Time Base Upper */
|
|
#define SPRN_IVOR32 0x210 /* Interrupt Vector Offset Register 32 */
|
|
#define SPRN_IVOR33 0x211 /* Interrupt Vector Offset Register 33 */
|
|
#define SPRN_IVOR34 0x212 /* Interrupt Vector Offset Register 34 */
|
|
#define SPRN_IVOR35 0x213 /* Interrupt Vector Offset Register 35 */
|
|
#define SPRN_IVOR36 0x214 /* Interrupt Vector Offset Register 36 */
|
|
#define SPRN_IVOR37 0x215 /* Interrupt Vector Offset Register 37 */
|
|
#define SPRN_MCSRR0 0x23A /* Machine Check Save and Restore Register 0 */
|
|
#define SPRN_MCSRR1 0x23B /* Machine Check Save and Restore Register 1 */
|
|
#define SPRN_MCSR 0x23C /* Machine Check Status Register */
|
|
#define SPRN_MCAR 0x23D /* Machine Check Address Register */
|
|
#define SPRN_DSRR0 0x23E /* Debug Save and Restore Register 0 */
|
|
#define SPRN_DSRR1 0x23F /* Debug Save and Restore Register 1 */
|
|
#define SPRN_SPRG8 0x25C /* Special Purpose Register General 8 */
|
|
#define SPRN_SPRG9 0x25D /* Special Purpose Register General 9 */
|
|
#define SPRN_L1CSR2 0x25E /* L1 Cache Control and Status Register 2 */
|
|
#define SPRN_MAS0 0x270 /* MMU Assist Register 0 */
|
|
#define SPRN_MAS1 0x271 /* MMU Assist Register 1 */
|
|
#define SPRN_MAS2 0x272 /* MMU Assist Register 2 */
|
|
#define SPRN_MAS3 0x273 /* MMU Assist Register 3 */
|
|
#define SPRN_MAS4 0x274 /* MMU Assist Register 4 */
|
|
#define SPRN_MAS5 0x275 /* MMU Assist Register 5 */
|
|
#define SPRN_MAS6 0x276 /* MMU Assist Register 6 */
|
|
#define SPRN_PID1 0x279 /* Process ID Register 1 */
|
|
#define SPRN_PID2 0x27A /* Process ID Register 2 */
|
|
#define SPRN_TLB0CFG 0x2B0 /* TLB 0 Config Register */
|
|
#define SPRN_TLB1CFG 0x2B1 /* TLB 1 Config Register */
|
|
#define SPRN_EPR 0x2BE /* External Proxy Register */
|
|
#define SPRN_CCR1 0x378 /* Core Configuration Register 1 */
|
|
#define SPRN_ZPR 0x3B0 /* Zone Protection Register (40x) */
|
|
#define SPRN_MAS7 0x3B0 /* MMU Assist Register 7 */
|
|
#define SPRN_MMUCR 0x3B2 /* MMU Control Register */
|
|
#define SPRN_CCR0 0x3B3 /* Core Configuration Register 0 */
|
|
#define SPRN_EPLC 0x3B3 /* External Process ID Load Context */
|
|
#define SPRN_EPSC 0x3B4 /* External Process ID Store Context */
|
|
#define SPRN_SGR 0x3B9 /* Storage Guarded Register */
|
|
#define SPRN_DCWR 0x3BA /* Data Cache Write-thru Register */
|
|
#define SPRN_SLER 0x3BB /* Little-endian real mode */
|
|
#define SPRN_SU0R 0x3BC /* "User 0" real mode (40x) */
|
|
#define SPRN_DCMP 0x3D1 /* Data TLB Compare Register */
|
|
#define SPRN_ICDBDR 0x3D3 /* Instruction Cache Debug Data Register */
|
|
#define SPRN_EVPR 0x3D6 /* Exception Vector Prefix Register */
|
|
#define SPRN_L1CSR0 0x3F2 /* L1 Cache Control and Status Register 0 */
|
|
#define SPRN_L1CSR1 0x3F3 /* L1 Cache Control and Status Register 1 */
|
|
#define SPRN_PIT 0x3DB /* Programmable Interval Timer */
|
|
#define SPRN_BUCSR 0x3F5 /* Branch Unit Control and Status */
|
|
#define SPRN_L2CSR0 0x3F9 /* L2 Data Cache Control and Status Register 0 */
|
|
#define SPRN_L2CSR1 0x3FA /* L2 Data Cache Control and Status Register 1 */
|
|
#define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */
|
|
#define SPRN_ICCR 0x3FB /* Instruction Cache Cacheability Register */
|
|
#define SPRN_SVR 0x3FF /* System Version Register */
|
|
|
|
/*
|
|
* SPRs which have conflicting definitions on true Book E versus classic,
|
|
* or IBM 40x.
|
|
*/
|
|
#ifdef CONFIG_BOOKE
|
|
#define SPRN_PID 0x030 /* Process ID */
|
|
#define SPRN_PID0 SPRN_PID/* Process ID Register 0 */
|
|
#define SPRN_CSRR0 0x03A /* Critical Save and Restore Register 0 */
|
|
#define SPRN_CSRR1 0x03B /* Critical Save and Restore Register 1 */
|
|
#define SPRN_DEAR 0x03D /* Data Error Address Register */
|
|
#define SPRN_ESR 0x03E /* Exception Syndrome Register */
|
|
#define SPRN_PIR 0x11E /* Processor Identification Register */
|
|
#define SPRN_DBSR 0x130 /* Debug Status Register */
|
|
#define SPRN_DBCR0 0x134 /* Debug Control Register 0 */
|
|
#define SPRN_DBCR1 0x135 /* Debug Control Register 1 */
|
|
#define SPRN_IAC1 0x138 /* Instruction Address Compare 1 */
|
|
#define SPRN_IAC2 0x139 /* Instruction Address Compare 2 */
|
|
#define SPRN_DAC1 0x13C /* Data Address Compare 1 */
|
|
#define SPRN_DAC2 0x13D /* Data Address Compare 2 */
|
|
#define SPRN_TSR 0x150 /* Timer Status Register */
|
|
#define SPRN_TCR 0x154 /* Timer Control Register */
|
|
#endif /* Book E */
|
|
#ifdef CONFIG_40x
|
|
#define SPRN_PID 0x3B1 /* Process ID */
|
|
#define SPRN_DBCR1 0x3BD /* Debug Control Register 1 */
|
|
#define SPRN_ESR 0x3D4 /* Exception Syndrome Register */
|
|
#define SPRN_DEAR 0x3D5 /* Data Error Address Register */
|
|
#define SPRN_TSR 0x3D8 /* Timer Status Register */
|
|
#define SPRN_TCR 0x3DA /* Timer Control Register */
|
|
#define SPRN_SRR2 0x3DE /* Save/Restore Register 2 */
|
|
#define SPRN_SRR3 0x3DF /* Save/Restore Register 3 */
|
|
#define SPRN_DBSR 0x3F0 /* Debug Status Register */
|
|
#define SPRN_DBCR0 0x3F2 /* Debug Control Register 0 */
|
|
#define SPRN_DAC1 0x3F6 /* Data Address Compare 1 */
|
|
#define SPRN_DAC2 0x3F7 /* Data Address Compare 2 */
|
|
#define SPRN_CSRR0 SPRN_SRR2 /* Critical Save and Restore Register 0 */
|
|
#define SPRN_CSRR1 SPRN_SRR3 /* Critical Save and Restore Register 1 */
|
|
#endif
|
|
|
|
/* Bit definitions for CCR1. */
|
|
#define CCR1_DPC 0x00000100 /* Disable L1 I-Cache/D-Cache parity checking */
|
|
#define CCR1_TCS 0x00000080 /* Timer Clock Select */
|
|
|
|
/* Bit definitions for the MCSR. */
|
|
#define MCSR_MCS 0x80000000 /* Machine Check Summary */
|
|
#define MCSR_IB 0x40000000 /* Instruction PLB Error */
|
|
#define MCSR_DRB 0x20000000 /* Data Read PLB Error */
|
|
#define MCSR_DWB 0x10000000 /* Data Write PLB Error */
|
|
#define MCSR_TLBP 0x08000000 /* TLB Parity Error */
|
|
#define MCSR_ICP 0x04000000 /* I-Cache Parity Error */
|
|
#define MCSR_DCSP 0x02000000 /* D-Cache Search Parity Error */
|
|
#define MCSR_DCFP 0x01000000 /* D-Cache Flush Parity Error */
|
|
#define MCSR_IMPE 0x00800000 /* Imprecise Machine Check Exception */
|
|
|
|
#ifdef CONFIG_E500
|
|
#define MCSR_MCP 0x80000000UL /* Machine Check Input Pin */
|
|
#define MCSR_ICPERR 0x40000000UL /* I-Cache Parity Error */
|
|
#define MCSR_DCP_PERR 0x20000000UL /* D-Cache Push Parity Error */
|
|
#define MCSR_DCPERR 0x10000000UL /* D-Cache Parity Error */
|
|
#define MCSR_BUS_IAERR 0x00000080UL /* Instruction Address Error */
|
|
#define MCSR_BUS_RAERR 0x00000040UL /* Read Address Error */
|
|
#define MCSR_BUS_WAERR 0x00000020UL /* Write Address Error */
|
|
#define MCSR_BUS_IBERR 0x00000010UL /* Instruction Data Error */
|
|
#define MCSR_BUS_RBERR 0x00000008UL /* Read Data Bus Error */
|
|
#define MCSR_BUS_WBERR 0x00000004UL /* Write Data Bus Error */
|
|
#define MCSR_BUS_IPERR 0x00000002UL /* Instruction parity Error */
|
|
#define MCSR_BUS_RPERR 0x00000001UL /* Read parity Error */
|
|
|
|
/* e500 parts may set unused bits in MCSR; mask these off */
|
|
#define MCSR_MASK (MCSR_MCP | MCSR_ICPERR | MCSR_DCP_PERR | \
|
|
MCSR_DCPERR | MCSR_BUS_IAERR | MCSR_BUS_RAERR | \
|
|
MCSR_BUS_WAERR | MCSR_BUS_IBERR | MCSR_BUS_RBERR | \
|
|
MCSR_BUS_WBERR | MCSR_BUS_IPERR | MCSR_BUS_RPERR)
|
|
#endif
|
|
#ifdef CONFIG_E200
|
|
#define MCSR_MCP 0x80000000UL /* Machine Check Input Pin */
|
|
#define MCSR_CP_PERR 0x20000000UL /* Cache Push Parity Error */
|
|
#define MCSR_CPERR 0x10000000UL /* Cache Parity Error */
|
|
#define MCSR_EXCP_ERR 0x08000000UL /* ISI, ITLB, or Bus Error on 1st insn
|
|
fetch for an exception handler */
|
|
#define MCSR_BUS_IRERR 0x00000010UL /* Read Bus Error on instruction fetch*/
|
|
#define MCSR_BUS_DRERR 0x00000008UL /* Read Bus Error on data load */
|
|
#define MCSR_BUS_WRERR 0x00000004UL /* Write Bus Error on buffered
|
|
store or cache line push */
|
|
|
|
/* e200 parts may set unused bits in MCSR; mask these off */
|
|
#define MCSR_MASK (MCSR_MCP | MCSR_CP_PERR | MCSR_CPERR | \
|
|
MCSR_EXCP_ERR | MCSR_BUS_IRERR | MCSR_BUS_DRERR | \
|
|
MCSR_BUS_WRERR)
|
|
#endif
|
|
|
|
/* Bit definitions for the DBSR. */
|
|
/*
|
|
* DBSR bits which have conflicting definitions on true Book E versus IBM 40x.
|
|
*/
|
|
#ifdef CONFIG_BOOKE
|
|
#define DBSR_IC 0x08000000 /* Instruction Completion */
|
|
#define DBSR_BT 0x04000000 /* Branch Taken */
|
|
#define DBSR_IRPT 0x02000000 /* Exception Debug Event */
|
|
#define DBSR_TIE 0x01000000 /* Trap Instruction Event */
|
|
#define DBSR_IAC1 0x00800000 /* Instr Address Compare 1 Event */
|
|
#define DBSR_IAC2 0x00400000 /* Instr Address Compare 2 Event */
|
|
#define DBSR_IAC3 0x00200000 /* Instr Address Compare 3 Event */
|
|
#define DBSR_IAC4 0x00100000 /* Instr Address Compare 4 Event */
|
|
#define DBSR_DAC1R 0x00080000 /* Data Addr Compare 1 Read Event */
|
|
#define DBSR_DAC1W 0x00040000 /* Data Addr Compare 1 Write Event */
|
|
#define DBSR_DAC2R 0x00020000 /* Data Addr Compare 2 Read Event */
|
|
#define DBSR_DAC2W 0x00010000 /* Data Addr Compare 2 Write Event */
|
|
#define DBSR_RET 0x00008000 /* Return Debug Event */
|
|
#define DBSR_CIRPT 0x00000040 /* Critical Interrupt Taken Event */
|
|
#define DBSR_CRET 0x00000020 /* Critical Return Debug Event */
|
|
#endif
|
|
#ifdef CONFIG_40x
|
|
#define DBSR_IC 0x80000000 /* Instruction Completion */
|
|
#define DBSR_BT 0x40000000 /* Branch taken */
|
|
#define DBSR_IRPT 0x20000000 /* Exception Debug Event */
|
|
#define DBSR_TIE 0x10000000 /* Trap Instruction debug Event */
|
|
#define DBSR_IAC1 0x04000000 /* Instruction Address Compare 1 Event */
|
|
#define DBSR_IAC2 0x02000000 /* Instruction Address Compare 2 Event */
|
|
#define DBSR_IAC3 0x00080000 /* Instruction Address Compare 3 Event */
|
|
#define DBSR_IAC4 0x00040000 /* Instruction Address Compare 4 Event */
|
|
#define DBSR_DAC1R 0x01000000 /* Data Address Compare 1 Read Event */
|
|
#define DBSR_DAC1W 0x00800000 /* Data Address Compare 1 Write Event */
|
|
#define DBSR_DAC2R 0x00400000 /* Data Address Compare 2 Read Event */
|
|
#define DBSR_DAC2W 0x00200000 /* Data Address Compare 2 Write Event */
|
|
#endif
|
|
|
|
/* Bit definitions related to the ESR. */
|
|
#define ESR_MCI 0x80000000 /* Machine Check - Instruction */
|
|
#define ESR_IMCP 0x80000000 /* Instr. Machine Check - Protection */
|
|
#define ESR_IMCN 0x40000000 /* Instr. Machine Check - Non-config */
|
|
#define ESR_IMCB 0x20000000 /* Instr. Machine Check - Bus error */
|
|
#define ESR_IMCT 0x10000000 /* Instr. Machine Check - Timeout */
|
|
#define ESR_PIL 0x08000000 /* Program Exception - Illegal */
|
|
#define ESR_PPR 0x04000000 /* Program Exception - Privileged */
|
|
#define ESR_PTR 0x02000000 /* Program Exception - Trap */
|
|
#define ESR_FP 0x01000000 /* Floating Point Operation */
|
|
#define ESR_DST 0x00800000 /* Storage Exception - Data miss */
|
|
#define ESR_DIZ 0x00400000 /* Storage Exception - Zone fault */
|
|
#define ESR_ST 0x00800000 /* Store Operation */
|
|
#define ESR_DLK 0x00200000 /* Data Cache Locking */
|
|
#define ESR_ILK 0x00100000 /* Instr. Cache Locking */
|
|
#define ESR_PUO 0x00040000 /* Unimplemented Operation exception */
|
|
#define ESR_BO 0x00020000 /* Byte Ordering */
|
|
|
|
/* Bit definitions related to the DBCR0. */
|
|
#if defined(CONFIG_40x)
|
|
#define DBCR0_EDM 0x80000000 /* External Debug Mode */
|
|
#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */
|
|
#define DBCR0_RST 0x30000000 /* all the bits in the RST field */
|
|
#define DBCR0_RST_SYSTEM 0x30000000 /* System Reset */
|
|
#define DBCR0_RST_CHIP 0x20000000 /* Chip Reset */
|
|
#define DBCR0_RST_CORE 0x10000000 /* Core Reset */
|
|
#define DBCR0_RST_NONE 0x00000000 /* No Reset */
|
|
#define DBCR0_IC 0x08000000 /* Instruction Completion */
|
|
#define DBCR0_ICMP DBCR0_IC
|
|
#define DBCR0_BT 0x04000000 /* Branch Taken */
|
|
#define DBCR0_BRT DBCR0_BT
|
|
#define DBCR0_EDE 0x02000000 /* Exception Debug Event */
|
|
#define DBCR0_IRPT DBCR0_EDE
|
|
#define DBCR0_TDE 0x01000000 /* TRAP Debug Event */
|
|
#define DBCR0_IA1 0x00800000 /* Instr Addr compare 1 enable */
|
|
#define DBCR0_IAC1 DBCR0_IA1
|
|
#define DBCR0_IA2 0x00400000 /* Instr Addr compare 2 enable */
|
|
#define DBCR0_IAC2 DBCR0_IA2
|
|
#define DBCR0_IA12 0x00200000 /* Instr Addr 1-2 range enable */
|
|
#define DBCR0_IA12X 0x00100000 /* Instr Addr 1-2 range eXclusive */
|
|
#define DBCR0_IA3 0x00080000 /* Instr Addr compare 3 enable */
|
|
#define DBCR0_IAC3 DBCR0_IA3
|
|
#define DBCR0_IA4 0x00040000 /* Instr Addr compare 4 enable */
|
|
#define DBCR0_IAC4 DBCR0_IA4
|
|
#define DBCR0_IA34 0x00020000 /* Instr Addr 3-4 range Enable */
|
|
#define DBCR0_IA34X 0x00010000 /* Instr Addr 3-4 range eXclusive */
|
|
#define DBCR0_IA12T 0x00008000 /* Instr Addr 1-2 range Toggle */
|
|
#define DBCR0_IA34T 0x00004000 /* Instr Addr 3-4 range Toggle */
|
|
#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */
|
|
#elif defined(CONFIG_BOOKE)
|
|
#define DBCR0_EDM 0x80000000 /* External Debug Mode */
|
|
#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */
|
|
#define DBCR0_RST 0x30000000 /* all the bits in the RST field */
|
|
/* DBCR0_RST_* is 44x specific and not followed in fsl booke */
|
|
#define DBCR0_RST_SYSTEM 0x30000000 /* System Reset */
|
|
#define DBCR0_RST_CHIP 0x20000000 /* Chip Reset */
|
|
#define DBCR0_RST_CORE 0x10000000 /* Core Reset */
|
|
#define DBCR0_RST_NONE 0x00000000 /* No Reset */
|
|
#define DBCR0_ICMP 0x08000000 /* Instruction Completion */
|
|
#define DBCR0_IC DBCR0_ICMP
|
|
#define DBCR0_BRT 0x04000000 /* Branch Taken */
|
|
#define DBCR0_BT DBCR0_BRT
|
|
#define DBCR0_IRPT 0x02000000 /* Exception Debug Event */
|
|
#define DBCR0_TDE 0x01000000 /* TRAP Debug Event */
|
|
#define DBCR0_TIE DBCR0_TDE
|
|
#define DBCR0_IAC1 0x00800000 /* Instr Addr compare 1 enable */
|
|
#define DBCR0_IAC2 0x00400000 /* Instr Addr compare 2 enable */
|
|
#define DBCR0_IAC3 0x00200000 /* Instr Addr compare 3 enable */
|
|
#define DBCR0_IAC4 0x00100000 /* Instr Addr compare 4 enable */
|
|
#define DBCR0_DAC1R 0x00080000 /* DAC 1 Read enable */
|
|
#define DBCR0_DAC1W 0x00040000 /* DAC 1 Write enable */
|
|
#define DBCR0_DAC2R 0x00020000 /* DAC 2 Read enable */
|
|
#define DBCR0_DAC2W 0x00010000 /* DAC 2 Write enable */
|
|
#define DBCR0_RET 0x00008000 /* Return Debug Event */
|
|
#define DBCR0_CIRPT 0x00000040 /* Critical Interrupt Taken Event */
|
|
#define DBCR0_CRET 0x00000020 /* Critical Return Debug Event */
|
|
#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */
|
|
|
|
/* Bit definitions related to the DBCR1. */
|
|
#define DBCR1_IAC12M 0x00800000 /* Instr Addr 1-2 range enable */
|
|
#define DBCR1_IAC12MX 0x00C00000 /* Instr Addr 1-2 range eXclusive */
|
|
#define DBCR1_IAC12AT 0x00010000 /* Instr Addr 1-2 range Toggle */
|
|
#define DBCR1_IAC34M 0x00000080 /* Instr Addr 3-4 range enable */
|
|
#define DBCR1_IAC34MX 0x000000C0 /* Instr Addr 3-4 range eXclusive */
|
|
#define DBCR1_IAC34AT 0x00000001 /* Instr Addr 3-4 range Toggle */
|
|
|
|
/* Bit definitions related to the DBCR2. */
|
|
#define DBCR2_DAC12M 0x00800000 /* DAC 1-2 range enable */
|
|
#define DBCR2_DAC12MX 0x00C00000 /* DAC 1-2 range eXclusive */
|
|
#define DBCR2_DAC12A 0x00200000 /* DAC 1-2 Asynchronous */
|
|
#endif
|
|
|
|
/* Bit definitions related to the TCR. */
|
|
#define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */
|
|
#define TCR_WP_MASK TCR_WP(3)
|
|
#define WP_2_17 0 /* 2^17 clocks */
|
|
#define WP_2_21 1 /* 2^21 clocks */
|
|
#define WP_2_25 2 /* 2^25 clocks */
|
|
#define WP_2_29 3 /* 2^29 clocks */
|
|
#define TCR_WRC(x) (((x)&0x3)<<28) /* WDT Reset Control */
|
|
#define TCR_WRC_MASK TCR_WRC(3)
|
|
#define WRC_NONE 0 /* No reset will occur */
|
|
#define WRC_CORE 1 /* Core reset will occur */
|
|
#define WRC_CHIP 2 /* Chip reset will occur */
|
|
#define WRC_SYSTEM 3 /* System reset will occur */
|
|
#define TCR_WIE 0x08000000 /* WDT Interrupt Enable */
|
|
#define TCR_PIE 0x04000000 /* PIT Interrupt Enable */
|
|
#define TCR_DIE TCR_PIE /* DEC Interrupt Enable */
|
|
#define TCR_FP(x) (((x)&0x3)<<24) /* FIT Period */
|
|
#define TCR_FP_MASK TCR_FP(3)
|
|
#define FP_2_9 0 /* 2^9 clocks */
|
|
#define FP_2_13 1 /* 2^13 clocks */
|
|
#define FP_2_17 2 /* 2^17 clocks */
|
|
#define FP_2_21 3 /* 2^21 clocks */
|
|
#define TCR_FIE 0x00800000 /* FIT Interrupt Enable */
|
|
#define TCR_ARE 0x00400000 /* Auto Reload Enable */
|
|
|
|
/* Bit definitions for the TSR. */
|
|
#define TSR_ENW 0x80000000 /* Enable Next Watchdog */
|
|
#define TSR_WIS 0x40000000 /* WDT Interrupt Status */
|
|
#define TSR_WRS(x) (((x)&0x3)<<28) /* WDT Reset Status */
|
|
#define WRS_NONE 0 /* No WDT reset occurred */
|
|
#define WRS_CORE 1 /* WDT forced core reset */
|
|
#define WRS_CHIP 2 /* WDT forced chip reset */
|
|
#define WRS_SYSTEM 3 /* WDT forced system reset */
|
|
#define TSR_PIS 0x08000000 /* PIT Interrupt Status */
|
|
#define TSR_DIS TSR_PIS /* DEC Interrupt Status */
|
|
#define TSR_FIS 0x04000000 /* FIT Interrupt Status */
|
|
|
|
/* Bit definitions for the DCCR. */
|
|
#define DCCR_NOCACHE 0 /* Noncacheable */
|
|
#define DCCR_CACHE 1 /* Cacheable */
|
|
|
|
/* Bit definitions for DCWR. */
|
|
#define DCWR_COPY 0 /* Copy-back */
|
|
#define DCWR_WRITE 1 /* Write-through */
|
|
|
|
/* Bit definitions for ICCR. */
|
|
#define ICCR_NOCACHE 0 /* Noncacheable */
|
|
#define ICCR_CACHE 1 /* Cacheable */
|
|
|
|
/* Bit definitions for L1CSR0. */
|
|
#define L1CSR0_CLFC 0x00000100 /* Cache Lock Bits Flash Clear */
|
|
#define L1CSR0_DCFI 0x00000002 /* Data Cache Flash Invalidate */
|
|
#define L1CSR0_CFI 0x00000002 /* Cache Flash Invalidate */
|
|
#define L1CSR0_DCE 0x00000001 /* Data Cache Enable */
|
|
|
|
/* Bit definitions for L1CSR1. */
|
|
#define L1CSR1_ICLFR 0x00000100 /* Instr Cache Lock Bits Flash Reset */
|
|
#define L1CSR1_ICFI 0x00000002 /* Instr Cache Flash Invalidate */
|
|
#define L1CSR1_ICE 0x00000001 /* Instr Cache Enable */
|
|
|
|
/* Bit definitions for L2CSR0. */
|
|
#define L2CSR0_L2E 0x80000000 /* L2 Cache Enable */
|
|
#define L2CSR0_L2PE 0x40000000 /* L2 Cache Parity/ECC Enable */
|
|
#define L2CSR0_L2WP 0x1c000000 /* L2 I/D Way Partioning */
|
|
#define L2CSR0_L2CM 0x03000000 /* L2 Cache Coherency Mode */
|
|
#define L2CSR0_L2FI 0x00200000 /* L2 Cache Flash Invalidate */
|
|
#define L2CSR0_L2IO 0x00100000 /* L2 Cache Instruction Only */
|
|
#define L2CSR0_L2DO 0x00010000 /* L2 Cache Data Only */
|
|
#define L2CSR0_L2REP 0x00003000 /* L2 Line Replacement Algo */
|
|
#define L2CSR0_L2FL 0x00000800 /* L2 Cache Flush */
|
|
#define L2CSR0_L2LFC 0x00000400 /* L2 Cache Lock Flash Clear */
|
|
#define L2CSR0_L2LOA 0x00000080 /* L2 Cache Lock Overflow Allocate */
|
|
#define L2CSR0_L2LO 0x00000020 /* L2 Cache Lock Overflow */
|
|
|
|
/* Bit definitions for SGR. */
|
|
#define SGR_NORMAL 0 /* Speculative fetching allowed. */
|
|
#define SGR_GUARDED 1 /* Speculative fetching disallowed. */
|
|
|
|
/* Bit definitions for SPEFSCR. */
|
|
#define SPEFSCR_SOVH 0x80000000 /* Summary integer overflow high */
|
|
#define SPEFSCR_OVH 0x40000000 /* Integer overflow high */
|
|
#define SPEFSCR_FGH 0x20000000 /* Embedded FP guard bit high */
|
|
#define SPEFSCR_FXH 0x10000000 /* Embedded FP sticky bit high */
|
|
#define SPEFSCR_FINVH 0x08000000 /* Embedded FP invalid operation high */
|
|
#define SPEFSCR_FDBZH 0x04000000 /* Embedded FP div by zero high */
|
|
#define SPEFSCR_FUNFH 0x02000000 /* Embedded FP underflow high */
|
|
#define SPEFSCR_FOVFH 0x01000000 /* Embedded FP overflow high */
|
|
#define SPEFSCR_FINXS 0x00200000 /* Embedded FP inexact sticky */
|
|
#define SPEFSCR_FINVS 0x00100000 /* Embedded FP invalid op. sticky */
|
|
#define SPEFSCR_FDBZS 0x00080000 /* Embedded FP div by zero sticky */
|
|
#define SPEFSCR_FUNFS 0x00040000 /* Embedded FP underflow sticky */
|
|
#define SPEFSCR_FOVFS 0x00020000 /* Embedded FP overflow sticky */
|
|
#define SPEFSCR_MODE 0x00010000 /* Embedded FP mode */
|
|
#define SPEFSCR_SOV 0x00008000 /* Integer summary overflow */
|
|
#define SPEFSCR_OV 0x00004000 /* Integer overflow */
|
|
#define SPEFSCR_FG 0x00002000 /* Embedded FP guard bit */
|
|
#define SPEFSCR_FX 0x00001000 /* Embedded FP sticky bit */
|
|
#define SPEFSCR_FINV 0x00000800 /* Embedded FP invalid operation */
|
|
#define SPEFSCR_FDBZ 0x00000400 /* Embedded FP div by zero */
|
|
#define SPEFSCR_FUNF 0x00000200 /* Embedded FP underflow */
|
|
#define SPEFSCR_FOVF 0x00000100 /* Embedded FP overflow */
|
|
#define SPEFSCR_FINXE 0x00000040 /* Embedded FP inexact enable */
|
|
#define SPEFSCR_FINVE 0x00000020 /* Embedded FP invalid op. enable */
|
|
#define SPEFSCR_FDBZE 0x00000010 /* Embedded FP div by zero enable */
|
|
#define SPEFSCR_FUNFE 0x00000008 /* Embedded FP underflow enable */
|
|
#define SPEFSCR_FOVFE 0x00000004 /* Embedded FP overflow enable */
|
|
#define SPEFSCR_FRMC 0x00000003 /* Embedded FP rounding mode control */
|
|
|
|
/*
|
|
* The IBM-403 is an even more odd special case, as it is much
|
|
* older than the IBM-405 series. We put these down here incase someone
|
|
* wishes to support these machines again.
|
|
*/
|
|
#ifdef CONFIG_403GCX
|
|
/* Special Purpose Registers (SPRNs)*/
|
|
#define SPRN_TBHU 0x3CC /* Time Base High User-mode */
|
|
#define SPRN_TBLU 0x3CD /* Time Base Low User-mode */
|
|
#define SPRN_CDBCR 0x3D7 /* Cache Debug Control Register */
|
|
#define SPRN_TBHI 0x3DC /* Time Base High */
|
|
#define SPRN_TBLO 0x3DD /* Time Base Low */
|
|
#define SPRN_DBCR 0x3F2 /* Debug Control Regsiter */
|
|
#define SPRN_PBL1 0x3FC /* Protection Bound Lower 1 */
|
|
#define SPRN_PBL2 0x3FE /* Protection Bound Lower 2 */
|
|
#define SPRN_PBU1 0x3FD /* Protection Bound Upper 1 */
|
|
#define SPRN_PBU2 0x3FF /* Protection Bound Upper 2 */
|
|
|
|
|
|
/* Bit definitions for the DBCR. */
|
|
#define DBCR_EDM DBCR0_EDM
|
|
#define DBCR_IDM DBCR0_IDM
|
|
#define DBCR_RST(x) (((x) & 0x3) << 28)
|
|
#define DBCR_RST_NONE 0
|
|
#define DBCR_RST_CORE 1
|
|
#define DBCR_RST_CHIP 2
|
|
#define DBCR_RST_SYSTEM 3
|
|
#define DBCR_IC DBCR0_IC /* Instruction Completion Debug Evnt */
|
|
#define DBCR_BT DBCR0_BT /* Branch Taken Debug Event */
|
|
#define DBCR_EDE DBCR0_EDE /* Exception Debug Event */
|
|
#define DBCR_TDE DBCR0_TDE /* TRAP Debug Event */
|
|
#define DBCR_FER 0x00F80000 /* First Events Remaining Mask */
|
|
#define DBCR_FT 0x00040000 /* Freeze Timers on Debug Event */
|
|
#define DBCR_IA1 0x00020000 /* Instr. Addr. Compare 1 Enable */
|
|
#define DBCR_IA2 0x00010000 /* Instr. Addr. Compare 2 Enable */
|
|
#define DBCR_D1R 0x00008000 /* Data Addr. Compare 1 Read Enable */
|
|
#define DBCR_D1W 0x00004000 /* Data Addr. Compare 1 Write Enable */
|
|
#define DBCR_D1S(x) (((x) & 0x3) << 12) /* Data Adrr. Compare 1 Size */
|
|
#define DAC_BYTE 0
|
|
#define DAC_HALF 1
|
|
#define DAC_WORD 2
|
|
#define DAC_QUAD 3
|
|
#define DBCR_D2R 0x00000800 /* Data Addr. Compare 2 Read Enable */
|
|
#define DBCR_D2W 0x00000400 /* Data Addr. Compare 2 Write Enable */
|
|
#define DBCR_D2S(x) (((x) & 0x3) << 8) /* Data Addr. Compare 2 Size */
|
|
#define DBCR_SBT 0x00000040 /* Second Branch Taken Debug Event */
|
|
#define DBCR_SED 0x00000020 /* Second Exception Debug Event */
|
|
#define DBCR_STD 0x00000010 /* Second Trap Debug Event */
|
|
#define DBCR_SIA 0x00000008 /* Second IAC Enable */
|
|
#define DBCR_SDA 0x00000004 /* Second DAC Enable */
|
|
#define DBCR_JOI 0x00000002 /* JTAG Serial Outbound Int. Enable */
|
|
#define DBCR_JII 0x00000001 /* JTAG Serial Inbound Int. Enable */
|
|
#endif /* 403GCX */
|
|
#endif /* __ASM_POWERPC_REG_BOOKE_H__ */
|
|
#endif /* __KERNEL__ */
|