mirror of
https://github.com/torvalds/linux.git
synced 2024-12-30 14:52:05 +00:00
4da722ca19
Pretty much any node can have a status property, so it doesn't need to be in examples. Converted with the following command and removed examples with SoC and board specific splits: git grep -l -E 'status.*=.*' Documentation/devicetree/ | xargs sed -i -E '/\sstatus.*=.*"(disabled|ok|okay)/d' Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
43 lines
1.2 KiB
Plaintext
43 lines
1.2 KiB
Plaintext
* Marvell MVEBU SATA PHY
|
|
|
|
Power control for the SATA phy found on Marvell MVEBU SoCs.
|
|
|
|
This document extends the binding described in phy-bindings.txt
|
|
|
|
Required properties :
|
|
|
|
- reg : Offset and length of the register set for the SATA device
|
|
- compatible : Should be "marvell,mvebu-sata-phy"
|
|
- clocks : phandle of clock and specifier that supplies the device
|
|
- clock-names : Should be "sata"
|
|
|
|
Example:
|
|
sata-phy@84000 {
|
|
compatible = "marvell,mvebu-sata-phy";
|
|
reg = <0x84000 0x0334>;
|
|
clocks = <&gate_clk 15>;
|
|
clock-names = "sata";
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
Armada 375 USB cluster
|
|
----------------------
|
|
|
|
Armada 375 comes with an USB2 host and device controller and an USB3
|
|
controller. The USB cluster control register allows to manage common
|
|
features of both USB controllers.
|
|
|
|
Required properties:
|
|
|
|
- compatible: "marvell,armada-375-usb-cluster"
|
|
- reg: Should contain usb cluster register location and length.
|
|
- #phy-cells : from the generic phy bindings, must be 1. Possible
|
|
values are 1 (USB2), 2 (USB3).
|
|
|
|
Example:
|
|
usbcluster: usb-cluster@18400 {
|
|
compatible = "marvell,armada-375-usb-cluster";
|
|
reg = <0x18400 0x4>;
|
|
#phy-cells = <1>
|
|
};
|