mirror of
https://github.com/torvalds/linux.git
synced 2024-11-29 15:41:36 +00:00
556eb8b791
Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5 LEGadNS38k5fs+73UaxV =7K4B -----END PGP SIGNATURE----- Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ...
1193 lines
31 KiB
C
1193 lines
31 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* hwmon.c - part of lm_sensors, Linux kernel modules for hardware monitoring
|
|
*
|
|
* This file defines the sysfs class "hwmon", for use by sensors drivers.
|
|
*
|
|
* Copyright (C) 2005 Mark M. Hoffman <mhoffman@lightlink.com>
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/gfp.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/idr.h>
|
|
#include <linux/kstrtox.h>
|
|
#include <linux/list.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/property.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/string.h>
|
|
#include <linux/thermal.h>
|
|
|
|
#define CREATE_TRACE_POINTS
|
|
#include <trace/events/hwmon.h>
|
|
|
|
#define HWMON_ID_PREFIX "hwmon"
|
|
#define HWMON_ID_FORMAT HWMON_ID_PREFIX "%d"
|
|
|
|
struct hwmon_device {
|
|
const char *name;
|
|
const char *label;
|
|
struct device dev;
|
|
const struct hwmon_chip_info *chip;
|
|
struct list_head tzdata;
|
|
struct attribute_group group;
|
|
const struct attribute_group **groups;
|
|
};
|
|
|
|
#define to_hwmon_device(d) container_of(d, struct hwmon_device, dev)
|
|
|
|
#define MAX_SYSFS_ATTR_NAME_LENGTH 32
|
|
|
|
struct hwmon_device_attribute {
|
|
struct device_attribute dev_attr;
|
|
const struct hwmon_ops *ops;
|
|
enum hwmon_sensor_types type;
|
|
u32 attr;
|
|
int index;
|
|
char name[MAX_SYSFS_ATTR_NAME_LENGTH];
|
|
};
|
|
|
|
#define to_hwmon_attr(d) \
|
|
container_of(d, struct hwmon_device_attribute, dev_attr)
|
|
#define to_dev_attr(a) container_of(a, struct device_attribute, attr)
|
|
|
|
/*
|
|
* Thermal zone information
|
|
*/
|
|
struct hwmon_thermal_data {
|
|
struct list_head node; /* hwmon tzdata list entry */
|
|
struct device *dev; /* Reference to hwmon device */
|
|
int index; /* sensor index */
|
|
struct thermal_zone_device *tzd;/* thermal zone device */
|
|
};
|
|
|
|
static ssize_t
|
|
name_show(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
return sprintf(buf, "%s\n", to_hwmon_device(dev)->name);
|
|
}
|
|
static DEVICE_ATTR_RO(name);
|
|
|
|
static ssize_t
|
|
label_show(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
return sysfs_emit(buf, "%s\n", to_hwmon_device(dev)->label);
|
|
}
|
|
static DEVICE_ATTR_RO(label);
|
|
|
|
static struct attribute *hwmon_dev_attrs[] = {
|
|
&dev_attr_name.attr,
|
|
&dev_attr_label.attr,
|
|
NULL
|
|
};
|
|
|
|
static umode_t hwmon_dev_attr_is_visible(struct kobject *kobj,
|
|
struct attribute *attr, int n)
|
|
{
|
|
struct device *dev = kobj_to_dev(kobj);
|
|
struct hwmon_device *hdev = to_hwmon_device(dev);
|
|
|
|
if (attr == &dev_attr_name.attr && hdev->name == NULL)
|
|
return 0;
|
|
|
|
if (attr == &dev_attr_label.attr && hdev->label == NULL)
|
|
return 0;
|
|
|
|
return attr->mode;
|
|
}
|
|
|
|
static const struct attribute_group hwmon_dev_attr_group = {
|
|
.attrs = hwmon_dev_attrs,
|
|
.is_visible = hwmon_dev_attr_is_visible,
|
|
};
|
|
|
|
static const struct attribute_group *hwmon_dev_attr_groups[] = {
|
|
&hwmon_dev_attr_group,
|
|
NULL
|
|
};
|
|
|
|
static void hwmon_free_attrs(struct attribute **attrs)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; attrs[i]; i++) {
|
|
struct device_attribute *dattr = to_dev_attr(attrs[i]);
|
|
struct hwmon_device_attribute *hattr = to_hwmon_attr(dattr);
|
|
|
|
kfree(hattr);
|
|
}
|
|
kfree(attrs);
|
|
}
|
|
|
|
static void hwmon_dev_release(struct device *dev)
|
|
{
|
|
struct hwmon_device *hwdev = to_hwmon_device(dev);
|
|
|
|
if (hwdev->group.attrs)
|
|
hwmon_free_attrs(hwdev->group.attrs);
|
|
kfree(hwdev->groups);
|
|
kfree(hwdev->label);
|
|
kfree(hwdev);
|
|
}
|
|
|
|
static struct class hwmon_class = {
|
|
.name = "hwmon",
|
|
.dev_groups = hwmon_dev_attr_groups,
|
|
.dev_release = hwmon_dev_release,
|
|
};
|
|
|
|
static DEFINE_IDA(hwmon_ida);
|
|
|
|
/* Thermal zone handling */
|
|
|
|
/*
|
|
* The complex conditional is necessary to avoid a cyclic dependency
|
|
* between hwmon and thermal_sys modules.
|
|
*/
|
|
#ifdef CONFIG_THERMAL_OF
|
|
static int hwmon_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
|
|
{
|
|
struct hwmon_thermal_data *tdata = thermal_zone_device_priv(tz);
|
|
struct hwmon_device *hwdev = to_hwmon_device(tdata->dev);
|
|
int ret;
|
|
long t;
|
|
|
|
ret = hwdev->chip->ops->read(tdata->dev, hwmon_temp, hwmon_temp_input,
|
|
tdata->index, &t);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*temp = t;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hwmon_thermal_set_trips(struct thermal_zone_device *tz, int low, int high)
|
|
{
|
|
struct hwmon_thermal_data *tdata = thermal_zone_device_priv(tz);
|
|
struct hwmon_device *hwdev = to_hwmon_device(tdata->dev);
|
|
const struct hwmon_chip_info *chip = hwdev->chip;
|
|
const struct hwmon_channel_info * const *info = chip->info;
|
|
unsigned int i;
|
|
int err;
|
|
|
|
if (!chip->ops->write)
|
|
return 0;
|
|
|
|
for (i = 0; info[i] && info[i]->type != hwmon_temp; i++)
|
|
continue;
|
|
|
|
if (!info[i])
|
|
return 0;
|
|
|
|
if (info[i]->config[tdata->index] & HWMON_T_MIN) {
|
|
err = chip->ops->write(tdata->dev, hwmon_temp,
|
|
hwmon_temp_min, tdata->index, low);
|
|
if (err && err != -EOPNOTSUPP)
|
|
return err;
|
|
}
|
|
|
|
if (info[i]->config[tdata->index] & HWMON_T_MAX) {
|
|
err = chip->ops->write(tdata->dev, hwmon_temp,
|
|
hwmon_temp_max, tdata->index, high);
|
|
if (err && err != -EOPNOTSUPP)
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct thermal_zone_device_ops hwmon_thermal_ops = {
|
|
.get_temp = hwmon_thermal_get_temp,
|
|
.set_trips = hwmon_thermal_set_trips,
|
|
};
|
|
|
|
static void hwmon_thermal_remove_sensor(void *data)
|
|
{
|
|
list_del(data);
|
|
}
|
|
|
|
static int hwmon_thermal_add_sensor(struct device *dev, int index)
|
|
{
|
|
struct hwmon_device *hwdev = to_hwmon_device(dev);
|
|
struct hwmon_thermal_data *tdata;
|
|
struct thermal_zone_device *tzd;
|
|
int err;
|
|
|
|
tdata = devm_kzalloc(dev, sizeof(*tdata), GFP_KERNEL);
|
|
if (!tdata)
|
|
return -ENOMEM;
|
|
|
|
tdata->dev = dev;
|
|
tdata->index = index;
|
|
|
|
tzd = devm_thermal_of_zone_register(dev, index, tdata,
|
|
&hwmon_thermal_ops);
|
|
if (IS_ERR(tzd)) {
|
|
if (PTR_ERR(tzd) != -ENODEV)
|
|
return PTR_ERR(tzd);
|
|
dev_info(dev, "temp%d_input not attached to any thermal zone\n",
|
|
index + 1);
|
|
devm_kfree(dev, tdata);
|
|
return 0;
|
|
}
|
|
|
|
err = devm_add_action(dev, hwmon_thermal_remove_sensor, &tdata->node);
|
|
if (err)
|
|
return err;
|
|
|
|
tdata->tzd = tzd;
|
|
list_add(&tdata->node, &hwdev->tzdata);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hwmon_thermal_register_sensors(struct device *dev)
|
|
{
|
|
struct hwmon_device *hwdev = to_hwmon_device(dev);
|
|
const struct hwmon_chip_info *chip = hwdev->chip;
|
|
const struct hwmon_channel_info * const *info = chip->info;
|
|
void *drvdata = dev_get_drvdata(dev);
|
|
int i;
|
|
|
|
for (i = 1; info[i]; i++) {
|
|
int j;
|
|
|
|
if (info[i]->type != hwmon_temp)
|
|
continue;
|
|
|
|
for (j = 0; info[i]->config[j]; j++) {
|
|
int err;
|
|
|
|
if (!(info[i]->config[j] & HWMON_T_INPUT) ||
|
|
!chip->ops->is_visible(drvdata, hwmon_temp,
|
|
hwmon_temp_input, j))
|
|
continue;
|
|
|
|
err = hwmon_thermal_add_sensor(dev, j);
|
|
if (err)
|
|
return err;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void hwmon_thermal_notify(struct device *dev, int index)
|
|
{
|
|
struct hwmon_device *hwdev = to_hwmon_device(dev);
|
|
struct hwmon_thermal_data *tzdata;
|
|
|
|
list_for_each_entry(tzdata, &hwdev->tzdata, node) {
|
|
if (tzdata->index == index) {
|
|
thermal_zone_device_update(tzdata->tzd,
|
|
THERMAL_EVENT_UNSPECIFIED);
|
|
}
|
|
}
|
|
}
|
|
|
|
#else
|
|
static int hwmon_thermal_register_sensors(struct device *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void hwmon_thermal_notify(struct device *dev, int index) { }
|
|
|
|
#endif /* IS_REACHABLE(CONFIG_THERMAL) && ... */
|
|
|
|
static int hwmon_attr_base(enum hwmon_sensor_types type)
|
|
{
|
|
if (type == hwmon_in || type == hwmon_intrusion)
|
|
return 0;
|
|
return 1;
|
|
}
|
|
|
|
/* sysfs attribute management */
|
|
|
|
static ssize_t hwmon_attr_show(struct device *dev,
|
|
struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct hwmon_device_attribute *hattr = to_hwmon_attr(devattr);
|
|
long val;
|
|
int ret;
|
|
|
|
ret = hattr->ops->read(dev, hattr->type, hattr->attr, hattr->index,
|
|
&val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
trace_hwmon_attr_show(hattr->index + hwmon_attr_base(hattr->type),
|
|
hattr->name, val);
|
|
|
|
return sprintf(buf, "%ld\n", val);
|
|
}
|
|
|
|
static ssize_t hwmon_attr_show_string(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
char *buf)
|
|
{
|
|
struct hwmon_device_attribute *hattr = to_hwmon_attr(devattr);
|
|
enum hwmon_sensor_types type = hattr->type;
|
|
const char *s;
|
|
int ret;
|
|
|
|
ret = hattr->ops->read_string(dev, hattr->type, hattr->attr,
|
|
hattr->index, &s);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
trace_hwmon_attr_show_string(hattr->index + hwmon_attr_base(type),
|
|
hattr->name, s);
|
|
|
|
return sprintf(buf, "%s\n", s);
|
|
}
|
|
|
|
static ssize_t hwmon_attr_store(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct hwmon_device_attribute *hattr = to_hwmon_attr(devattr);
|
|
long val;
|
|
int ret;
|
|
|
|
ret = kstrtol(buf, 10, &val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = hattr->ops->write(dev, hattr->type, hattr->attr, hattr->index,
|
|
val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
trace_hwmon_attr_store(hattr->index + hwmon_attr_base(hattr->type),
|
|
hattr->name, val);
|
|
|
|
return count;
|
|
}
|
|
|
|
static bool is_string_attr(enum hwmon_sensor_types type, u32 attr)
|
|
{
|
|
return (type == hwmon_temp && attr == hwmon_temp_label) ||
|
|
(type == hwmon_in && attr == hwmon_in_label) ||
|
|
(type == hwmon_curr && attr == hwmon_curr_label) ||
|
|
(type == hwmon_power && attr == hwmon_power_label) ||
|
|
(type == hwmon_energy && attr == hwmon_energy_label) ||
|
|
(type == hwmon_humidity && attr == hwmon_humidity_label) ||
|
|
(type == hwmon_fan && attr == hwmon_fan_label);
|
|
}
|
|
|
|
static struct attribute *hwmon_genattr(const void *drvdata,
|
|
enum hwmon_sensor_types type,
|
|
u32 attr,
|
|
int index,
|
|
const char *template,
|
|
const struct hwmon_ops *ops)
|
|
{
|
|
struct hwmon_device_attribute *hattr;
|
|
struct device_attribute *dattr;
|
|
struct attribute *a;
|
|
umode_t mode;
|
|
const char *name;
|
|
bool is_string = is_string_attr(type, attr);
|
|
|
|
/* The attribute is invisible if there is no template string */
|
|
if (!template)
|
|
return ERR_PTR(-ENOENT);
|
|
|
|
mode = ops->is_visible(drvdata, type, attr, index);
|
|
if (!mode)
|
|
return ERR_PTR(-ENOENT);
|
|
|
|
if ((mode & 0444) && ((is_string && !ops->read_string) ||
|
|
(!is_string && !ops->read)))
|
|
return ERR_PTR(-EINVAL);
|
|
if ((mode & 0222) && !ops->write)
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
hattr = kzalloc(sizeof(*hattr), GFP_KERNEL);
|
|
if (!hattr)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
if (type == hwmon_chip) {
|
|
name = template;
|
|
} else {
|
|
scnprintf(hattr->name, sizeof(hattr->name), template,
|
|
index + hwmon_attr_base(type));
|
|
name = hattr->name;
|
|
}
|
|
|
|
hattr->type = type;
|
|
hattr->attr = attr;
|
|
hattr->index = index;
|
|
hattr->ops = ops;
|
|
|
|
dattr = &hattr->dev_attr;
|
|
dattr->show = is_string ? hwmon_attr_show_string : hwmon_attr_show;
|
|
dattr->store = hwmon_attr_store;
|
|
|
|
a = &dattr->attr;
|
|
sysfs_attr_init(a);
|
|
a->name = name;
|
|
a->mode = mode;
|
|
|
|
return a;
|
|
}
|
|
|
|
/*
|
|
* Chip attributes are not attribute templates but actual sysfs attributes.
|
|
* See hwmon_genattr() for special handling.
|
|
*/
|
|
static const char * const hwmon_chip_attrs[] = {
|
|
[hwmon_chip_temp_reset_history] = "temp_reset_history",
|
|
[hwmon_chip_in_reset_history] = "in_reset_history",
|
|
[hwmon_chip_curr_reset_history] = "curr_reset_history",
|
|
[hwmon_chip_power_reset_history] = "power_reset_history",
|
|
[hwmon_chip_update_interval] = "update_interval",
|
|
[hwmon_chip_alarms] = "alarms",
|
|
[hwmon_chip_samples] = "samples",
|
|
[hwmon_chip_curr_samples] = "curr_samples",
|
|
[hwmon_chip_in_samples] = "in_samples",
|
|
[hwmon_chip_power_samples] = "power_samples",
|
|
[hwmon_chip_temp_samples] = "temp_samples",
|
|
};
|
|
|
|
static const char * const hwmon_temp_attr_templates[] = {
|
|
[hwmon_temp_enable] = "temp%d_enable",
|
|
[hwmon_temp_input] = "temp%d_input",
|
|
[hwmon_temp_type] = "temp%d_type",
|
|
[hwmon_temp_lcrit] = "temp%d_lcrit",
|
|
[hwmon_temp_lcrit_hyst] = "temp%d_lcrit_hyst",
|
|
[hwmon_temp_min] = "temp%d_min",
|
|
[hwmon_temp_min_hyst] = "temp%d_min_hyst",
|
|
[hwmon_temp_max] = "temp%d_max",
|
|
[hwmon_temp_max_hyst] = "temp%d_max_hyst",
|
|
[hwmon_temp_crit] = "temp%d_crit",
|
|
[hwmon_temp_crit_hyst] = "temp%d_crit_hyst",
|
|
[hwmon_temp_emergency] = "temp%d_emergency",
|
|
[hwmon_temp_emergency_hyst] = "temp%d_emergency_hyst",
|
|
[hwmon_temp_alarm] = "temp%d_alarm",
|
|
[hwmon_temp_lcrit_alarm] = "temp%d_lcrit_alarm",
|
|
[hwmon_temp_min_alarm] = "temp%d_min_alarm",
|
|
[hwmon_temp_max_alarm] = "temp%d_max_alarm",
|
|
[hwmon_temp_crit_alarm] = "temp%d_crit_alarm",
|
|
[hwmon_temp_emergency_alarm] = "temp%d_emergency_alarm",
|
|
[hwmon_temp_fault] = "temp%d_fault",
|
|
[hwmon_temp_offset] = "temp%d_offset",
|
|
[hwmon_temp_label] = "temp%d_label",
|
|
[hwmon_temp_lowest] = "temp%d_lowest",
|
|
[hwmon_temp_highest] = "temp%d_highest",
|
|
[hwmon_temp_reset_history] = "temp%d_reset_history",
|
|
[hwmon_temp_rated_min] = "temp%d_rated_min",
|
|
[hwmon_temp_rated_max] = "temp%d_rated_max",
|
|
};
|
|
|
|
static const char * const hwmon_in_attr_templates[] = {
|
|
[hwmon_in_enable] = "in%d_enable",
|
|
[hwmon_in_input] = "in%d_input",
|
|
[hwmon_in_min] = "in%d_min",
|
|
[hwmon_in_max] = "in%d_max",
|
|
[hwmon_in_lcrit] = "in%d_lcrit",
|
|
[hwmon_in_crit] = "in%d_crit",
|
|
[hwmon_in_average] = "in%d_average",
|
|
[hwmon_in_lowest] = "in%d_lowest",
|
|
[hwmon_in_highest] = "in%d_highest",
|
|
[hwmon_in_reset_history] = "in%d_reset_history",
|
|
[hwmon_in_label] = "in%d_label",
|
|
[hwmon_in_alarm] = "in%d_alarm",
|
|
[hwmon_in_min_alarm] = "in%d_min_alarm",
|
|
[hwmon_in_max_alarm] = "in%d_max_alarm",
|
|
[hwmon_in_lcrit_alarm] = "in%d_lcrit_alarm",
|
|
[hwmon_in_crit_alarm] = "in%d_crit_alarm",
|
|
[hwmon_in_rated_min] = "in%d_rated_min",
|
|
[hwmon_in_rated_max] = "in%d_rated_max",
|
|
};
|
|
|
|
static const char * const hwmon_curr_attr_templates[] = {
|
|
[hwmon_curr_enable] = "curr%d_enable",
|
|
[hwmon_curr_input] = "curr%d_input",
|
|
[hwmon_curr_min] = "curr%d_min",
|
|
[hwmon_curr_max] = "curr%d_max",
|
|
[hwmon_curr_lcrit] = "curr%d_lcrit",
|
|
[hwmon_curr_crit] = "curr%d_crit",
|
|
[hwmon_curr_average] = "curr%d_average",
|
|
[hwmon_curr_lowest] = "curr%d_lowest",
|
|
[hwmon_curr_highest] = "curr%d_highest",
|
|
[hwmon_curr_reset_history] = "curr%d_reset_history",
|
|
[hwmon_curr_label] = "curr%d_label",
|
|
[hwmon_curr_alarm] = "curr%d_alarm",
|
|
[hwmon_curr_min_alarm] = "curr%d_min_alarm",
|
|
[hwmon_curr_max_alarm] = "curr%d_max_alarm",
|
|
[hwmon_curr_lcrit_alarm] = "curr%d_lcrit_alarm",
|
|
[hwmon_curr_crit_alarm] = "curr%d_crit_alarm",
|
|
[hwmon_curr_rated_min] = "curr%d_rated_min",
|
|
[hwmon_curr_rated_max] = "curr%d_rated_max",
|
|
};
|
|
|
|
static const char * const hwmon_power_attr_templates[] = {
|
|
[hwmon_power_enable] = "power%d_enable",
|
|
[hwmon_power_average] = "power%d_average",
|
|
[hwmon_power_average_interval] = "power%d_average_interval",
|
|
[hwmon_power_average_interval_max] = "power%d_interval_max",
|
|
[hwmon_power_average_interval_min] = "power%d_interval_min",
|
|
[hwmon_power_average_highest] = "power%d_average_highest",
|
|
[hwmon_power_average_lowest] = "power%d_average_lowest",
|
|
[hwmon_power_average_max] = "power%d_average_max",
|
|
[hwmon_power_average_min] = "power%d_average_min",
|
|
[hwmon_power_input] = "power%d_input",
|
|
[hwmon_power_input_highest] = "power%d_input_highest",
|
|
[hwmon_power_input_lowest] = "power%d_input_lowest",
|
|
[hwmon_power_reset_history] = "power%d_reset_history",
|
|
[hwmon_power_accuracy] = "power%d_accuracy",
|
|
[hwmon_power_cap] = "power%d_cap",
|
|
[hwmon_power_cap_hyst] = "power%d_cap_hyst",
|
|
[hwmon_power_cap_max] = "power%d_cap_max",
|
|
[hwmon_power_cap_min] = "power%d_cap_min",
|
|
[hwmon_power_min] = "power%d_min",
|
|
[hwmon_power_max] = "power%d_max",
|
|
[hwmon_power_lcrit] = "power%d_lcrit",
|
|
[hwmon_power_crit] = "power%d_crit",
|
|
[hwmon_power_label] = "power%d_label",
|
|
[hwmon_power_alarm] = "power%d_alarm",
|
|
[hwmon_power_cap_alarm] = "power%d_cap_alarm",
|
|
[hwmon_power_min_alarm] = "power%d_min_alarm",
|
|
[hwmon_power_max_alarm] = "power%d_max_alarm",
|
|
[hwmon_power_lcrit_alarm] = "power%d_lcrit_alarm",
|
|
[hwmon_power_crit_alarm] = "power%d_crit_alarm",
|
|
[hwmon_power_rated_min] = "power%d_rated_min",
|
|
[hwmon_power_rated_max] = "power%d_rated_max",
|
|
};
|
|
|
|
static const char * const hwmon_energy_attr_templates[] = {
|
|
[hwmon_energy_enable] = "energy%d_enable",
|
|
[hwmon_energy_input] = "energy%d_input",
|
|
[hwmon_energy_label] = "energy%d_label",
|
|
};
|
|
|
|
static const char * const hwmon_humidity_attr_templates[] = {
|
|
[hwmon_humidity_enable] = "humidity%d_enable",
|
|
[hwmon_humidity_input] = "humidity%d_input",
|
|
[hwmon_humidity_label] = "humidity%d_label",
|
|
[hwmon_humidity_min] = "humidity%d_min",
|
|
[hwmon_humidity_min_hyst] = "humidity%d_min_hyst",
|
|
[hwmon_humidity_max] = "humidity%d_max",
|
|
[hwmon_humidity_max_hyst] = "humidity%d_max_hyst",
|
|
[hwmon_humidity_alarm] = "humidity%d_alarm",
|
|
[hwmon_humidity_fault] = "humidity%d_fault",
|
|
[hwmon_humidity_rated_min] = "humidity%d_rated_min",
|
|
[hwmon_humidity_rated_max] = "humidity%d_rated_max",
|
|
};
|
|
|
|
static const char * const hwmon_fan_attr_templates[] = {
|
|
[hwmon_fan_enable] = "fan%d_enable",
|
|
[hwmon_fan_input] = "fan%d_input",
|
|
[hwmon_fan_label] = "fan%d_label",
|
|
[hwmon_fan_min] = "fan%d_min",
|
|
[hwmon_fan_max] = "fan%d_max",
|
|
[hwmon_fan_div] = "fan%d_div",
|
|
[hwmon_fan_pulses] = "fan%d_pulses",
|
|
[hwmon_fan_target] = "fan%d_target",
|
|
[hwmon_fan_alarm] = "fan%d_alarm",
|
|
[hwmon_fan_min_alarm] = "fan%d_min_alarm",
|
|
[hwmon_fan_max_alarm] = "fan%d_max_alarm",
|
|
[hwmon_fan_fault] = "fan%d_fault",
|
|
};
|
|
|
|
static const char * const hwmon_pwm_attr_templates[] = {
|
|
[hwmon_pwm_input] = "pwm%d",
|
|
[hwmon_pwm_enable] = "pwm%d_enable",
|
|
[hwmon_pwm_mode] = "pwm%d_mode",
|
|
[hwmon_pwm_freq] = "pwm%d_freq",
|
|
[hwmon_pwm_auto_channels_temp] = "pwm%d_auto_channels_temp",
|
|
};
|
|
|
|
static const char * const hwmon_intrusion_attr_templates[] = {
|
|
[hwmon_intrusion_alarm] = "intrusion%d_alarm",
|
|
[hwmon_intrusion_beep] = "intrusion%d_beep",
|
|
};
|
|
|
|
static const char * const *__templates[] = {
|
|
[hwmon_chip] = hwmon_chip_attrs,
|
|
[hwmon_temp] = hwmon_temp_attr_templates,
|
|
[hwmon_in] = hwmon_in_attr_templates,
|
|
[hwmon_curr] = hwmon_curr_attr_templates,
|
|
[hwmon_power] = hwmon_power_attr_templates,
|
|
[hwmon_energy] = hwmon_energy_attr_templates,
|
|
[hwmon_humidity] = hwmon_humidity_attr_templates,
|
|
[hwmon_fan] = hwmon_fan_attr_templates,
|
|
[hwmon_pwm] = hwmon_pwm_attr_templates,
|
|
[hwmon_intrusion] = hwmon_intrusion_attr_templates,
|
|
};
|
|
|
|
static const int __templates_size[] = {
|
|
[hwmon_chip] = ARRAY_SIZE(hwmon_chip_attrs),
|
|
[hwmon_temp] = ARRAY_SIZE(hwmon_temp_attr_templates),
|
|
[hwmon_in] = ARRAY_SIZE(hwmon_in_attr_templates),
|
|
[hwmon_curr] = ARRAY_SIZE(hwmon_curr_attr_templates),
|
|
[hwmon_power] = ARRAY_SIZE(hwmon_power_attr_templates),
|
|
[hwmon_energy] = ARRAY_SIZE(hwmon_energy_attr_templates),
|
|
[hwmon_humidity] = ARRAY_SIZE(hwmon_humidity_attr_templates),
|
|
[hwmon_fan] = ARRAY_SIZE(hwmon_fan_attr_templates),
|
|
[hwmon_pwm] = ARRAY_SIZE(hwmon_pwm_attr_templates),
|
|
[hwmon_intrusion] = ARRAY_SIZE(hwmon_intrusion_attr_templates),
|
|
};
|
|
|
|
int hwmon_notify_event(struct device *dev, enum hwmon_sensor_types type,
|
|
u32 attr, int channel)
|
|
{
|
|
char event[MAX_SYSFS_ATTR_NAME_LENGTH + 5];
|
|
char sattr[MAX_SYSFS_ATTR_NAME_LENGTH];
|
|
char *envp[] = { event, NULL };
|
|
const char * const *templates;
|
|
const char *template;
|
|
int base;
|
|
|
|
if (type >= ARRAY_SIZE(__templates))
|
|
return -EINVAL;
|
|
if (attr >= __templates_size[type])
|
|
return -EINVAL;
|
|
|
|
templates = __templates[type];
|
|
template = templates[attr];
|
|
|
|
base = hwmon_attr_base(type);
|
|
|
|
scnprintf(sattr, MAX_SYSFS_ATTR_NAME_LENGTH, template, base + channel);
|
|
scnprintf(event, sizeof(event), "NAME=%s", sattr);
|
|
sysfs_notify(&dev->kobj, NULL, sattr);
|
|
kobject_uevent_env(&dev->kobj, KOBJ_CHANGE, envp);
|
|
|
|
if (type == hwmon_temp)
|
|
hwmon_thermal_notify(dev, channel);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(hwmon_notify_event);
|
|
|
|
static int hwmon_num_channel_attrs(const struct hwmon_channel_info *info)
|
|
{
|
|
int i, n;
|
|
|
|
for (i = n = 0; info->config[i]; i++)
|
|
n += hweight32(info->config[i]);
|
|
|
|
return n;
|
|
}
|
|
|
|
static int hwmon_genattrs(const void *drvdata,
|
|
struct attribute **attrs,
|
|
const struct hwmon_ops *ops,
|
|
const struct hwmon_channel_info *info)
|
|
{
|
|
const char * const *templates;
|
|
int template_size;
|
|
int i, aindex = 0;
|
|
|
|
if (info->type >= ARRAY_SIZE(__templates))
|
|
return -EINVAL;
|
|
|
|
templates = __templates[info->type];
|
|
template_size = __templates_size[info->type];
|
|
|
|
for (i = 0; info->config[i]; i++) {
|
|
u32 attr_mask = info->config[i];
|
|
u32 attr;
|
|
|
|
while (attr_mask) {
|
|
struct attribute *a;
|
|
|
|
attr = __ffs(attr_mask);
|
|
attr_mask &= ~BIT(attr);
|
|
if (attr >= template_size)
|
|
return -EINVAL;
|
|
a = hwmon_genattr(drvdata, info->type, attr, i,
|
|
templates[attr], ops);
|
|
if (IS_ERR(a)) {
|
|
if (PTR_ERR(a) != -ENOENT)
|
|
return PTR_ERR(a);
|
|
continue;
|
|
}
|
|
attrs[aindex++] = a;
|
|
}
|
|
}
|
|
return aindex;
|
|
}
|
|
|
|
static struct attribute **
|
|
__hwmon_create_attrs(const void *drvdata, const struct hwmon_chip_info *chip)
|
|
{
|
|
int ret, i, aindex = 0, nattrs = 0;
|
|
struct attribute **attrs;
|
|
|
|
for (i = 0; chip->info[i]; i++)
|
|
nattrs += hwmon_num_channel_attrs(chip->info[i]);
|
|
|
|
if (nattrs == 0)
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
attrs = kcalloc(nattrs + 1, sizeof(*attrs), GFP_KERNEL);
|
|
if (!attrs)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
for (i = 0; chip->info[i]; i++) {
|
|
ret = hwmon_genattrs(drvdata, &attrs[aindex], chip->ops,
|
|
chip->info[i]);
|
|
if (ret < 0) {
|
|
hwmon_free_attrs(attrs);
|
|
return ERR_PTR(ret);
|
|
}
|
|
aindex += ret;
|
|
}
|
|
|
|
return attrs;
|
|
}
|
|
|
|
static struct device *
|
|
__hwmon_device_register(struct device *dev, const char *name, void *drvdata,
|
|
const struct hwmon_chip_info *chip,
|
|
const struct attribute_group **groups)
|
|
{
|
|
struct hwmon_device *hwdev;
|
|
const char *label;
|
|
struct device *hdev;
|
|
struct device *tdev = dev;
|
|
int i, err, id;
|
|
|
|
/* Complain about invalid characters in hwmon name attribute */
|
|
if (name && (!strlen(name) || strpbrk(name, "-* \t\n")))
|
|
dev_warn(dev,
|
|
"hwmon: '%s' is not a valid name attribute, please fix\n",
|
|
name);
|
|
|
|
id = ida_alloc(&hwmon_ida, GFP_KERNEL);
|
|
if (id < 0)
|
|
return ERR_PTR(id);
|
|
|
|
hwdev = kzalloc(sizeof(*hwdev), GFP_KERNEL);
|
|
if (hwdev == NULL) {
|
|
err = -ENOMEM;
|
|
goto ida_remove;
|
|
}
|
|
|
|
hdev = &hwdev->dev;
|
|
|
|
if (chip) {
|
|
struct attribute **attrs;
|
|
int ngroups = 2; /* terminating NULL plus &hwdev->groups */
|
|
|
|
if (groups)
|
|
for (i = 0; groups[i]; i++)
|
|
ngroups++;
|
|
|
|
hwdev->groups = kcalloc(ngroups, sizeof(*groups), GFP_KERNEL);
|
|
if (!hwdev->groups) {
|
|
err = -ENOMEM;
|
|
goto free_hwmon;
|
|
}
|
|
|
|
attrs = __hwmon_create_attrs(drvdata, chip);
|
|
if (IS_ERR(attrs)) {
|
|
err = PTR_ERR(attrs);
|
|
goto free_hwmon;
|
|
}
|
|
|
|
hwdev->group.attrs = attrs;
|
|
ngroups = 0;
|
|
hwdev->groups[ngroups++] = &hwdev->group;
|
|
|
|
if (groups) {
|
|
for (i = 0; groups[i]; i++)
|
|
hwdev->groups[ngroups++] = groups[i];
|
|
}
|
|
|
|
hdev->groups = hwdev->groups;
|
|
} else {
|
|
hdev->groups = groups;
|
|
}
|
|
|
|
if (dev && device_property_present(dev, "label")) {
|
|
err = device_property_read_string(dev, "label", &label);
|
|
if (err < 0)
|
|
goto free_hwmon;
|
|
|
|
hwdev->label = kstrdup(label, GFP_KERNEL);
|
|
if (hwdev->label == NULL) {
|
|
err = -ENOMEM;
|
|
goto free_hwmon;
|
|
}
|
|
}
|
|
|
|
hwdev->name = name;
|
|
hdev->class = &hwmon_class;
|
|
hdev->parent = dev;
|
|
while (tdev && !tdev->of_node)
|
|
tdev = tdev->parent;
|
|
hdev->of_node = tdev ? tdev->of_node : NULL;
|
|
hwdev->chip = chip;
|
|
dev_set_drvdata(hdev, drvdata);
|
|
dev_set_name(hdev, HWMON_ID_FORMAT, id);
|
|
err = device_register(hdev);
|
|
if (err) {
|
|
put_device(hdev);
|
|
goto ida_remove;
|
|
}
|
|
|
|
INIT_LIST_HEAD(&hwdev->tzdata);
|
|
|
|
if (hdev->of_node && chip && chip->ops->read &&
|
|
chip->info[0]->type == hwmon_chip &&
|
|
(chip->info[0]->config[0] & HWMON_C_REGISTER_TZ)) {
|
|
err = hwmon_thermal_register_sensors(hdev);
|
|
if (err) {
|
|
device_unregister(hdev);
|
|
/*
|
|
* Don't worry about hwdev; hwmon_dev_release(), called
|
|
* from device_unregister(), will free it.
|
|
*/
|
|
goto ida_remove;
|
|
}
|
|
}
|
|
|
|
return hdev;
|
|
|
|
free_hwmon:
|
|
hwmon_dev_release(hdev);
|
|
ida_remove:
|
|
ida_free(&hwmon_ida, id);
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
/**
|
|
* hwmon_device_register_with_groups - register w/ hwmon
|
|
* @dev: the parent device
|
|
* @name: hwmon name attribute
|
|
* @drvdata: driver data to attach to created device
|
|
* @groups: List of attribute groups to create
|
|
*
|
|
* hwmon_device_unregister() must be called when the device is no
|
|
* longer needed.
|
|
*
|
|
* Returns the pointer to the new device.
|
|
*/
|
|
struct device *
|
|
hwmon_device_register_with_groups(struct device *dev, const char *name,
|
|
void *drvdata,
|
|
const struct attribute_group **groups)
|
|
{
|
|
if (!name)
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
return __hwmon_device_register(dev, name, drvdata, NULL, groups);
|
|
}
|
|
EXPORT_SYMBOL_GPL(hwmon_device_register_with_groups);
|
|
|
|
/**
|
|
* hwmon_device_register_with_info - register w/ hwmon
|
|
* @dev: the parent device (mandatory)
|
|
* @name: hwmon name attribute (mandatory)
|
|
* @drvdata: driver data to attach to created device (optional)
|
|
* @chip: pointer to hwmon chip information (mandatory)
|
|
* @extra_groups: pointer to list of additional non-standard attribute groups
|
|
* (optional)
|
|
*
|
|
* hwmon_device_unregister() must be called when the device is no
|
|
* longer needed.
|
|
*
|
|
* Returns the pointer to the new device.
|
|
*/
|
|
struct device *
|
|
hwmon_device_register_with_info(struct device *dev, const char *name,
|
|
void *drvdata,
|
|
const struct hwmon_chip_info *chip,
|
|
const struct attribute_group **extra_groups)
|
|
{
|
|
if (!dev || !name || !chip)
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
if (!chip->ops || !chip->ops->is_visible || !chip->info)
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
return __hwmon_device_register(dev, name, drvdata, chip, extra_groups);
|
|
}
|
|
EXPORT_SYMBOL_GPL(hwmon_device_register_with_info);
|
|
|
|
/**
|
|
* hwmon_device_register_for_thermal - register hwmon device for thermal subsystem
|
|
* @dev: the parent device
|
|
* @name: hwmon name attribute
|
|
* @drvdata: driver data to attach to created device
|
|
*
|
|
* The use of this function is restricted. It is provided for legacy reasons
|
|
* and must only be called from the thermal subsystem.
|
|
*
|
|
* hwmon_device_unregister() must be called when the device is no
|
|
* longer needed.
|
|
*
|
|
* Returns the pointer to the new device.
|
|
*/
|
|
struct device *
|
|
hwmon_device_register_for_thermal(struct device *dev, const char *name,
|
|
void *drvdata)
|
|
{
|
|
if (!name || !dev)
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
return __hwmon_device_register(dev, name, drvdata, NULL, NULL);
|
|
}
|
|
EXPORT_SYMBOL_NS_GPL(hwmon_device_register_for_thermal, HWMON_THERMAL);
|
|
|
|
/**
|
|
* hwmon_device_register - register w/ hwmon
|
|
* @dev: the device to register
|
|
*
|
|
* hwmon_device_unregister() must be called when the device is no
|
|
* longer needed.
|
|
*
|
|
* Returns the pointer to the new device.
|
|
*/
|
|
struct device *hwmon_device_register(struct device *dev)
|
|
{
|
|
dev_warn(dev,
|
|
"hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().\n");
|
|
|
|
return __hwmon_device_register(dev, NULL, NULL, NULL, NULL);
|
|
}
|
|
EXPORT_SYMBOL_GPL(hwmon_device_register);
|
|
|
|
/**
|
|
* hwmon_device_unregister - removes the previously registered class device
|
|
*
|
|
* @dev: the class device to destroy
|
|
*/
|
|
void hwmon_device_unregister(struct device *dev)
|
|
{
|
|
int id;
|
|
|
|
if (likely(sscanf(dev_name(dev), HWMON_ID_FORMAT, &id) == 1)) {
|
|
device_unregister(dev);
|
|
ida_free(&hwmon_ida, id);
|
|
} else
|
|
dev_dbg(dev->parent,
|
|
"hwmon_device_unregister() failed: bad class ID!\n");
|
|
}
|
|
EXPORT_SYMBOL_GPL(hwmon_device_unregister);
|
|
|
|
static void devm_hwmon_release(struct device *dev, void *res)
|
|
{
|
|
struct device *hwdev = *(struct device **)res;
|
|
|
|
hwmon_device_unregister(hwdev);
|
|
}
|
|
|
|
/**
|
|
* devm_hwmon_device_register_with_groups - register w/ hwmon
|
|
* @dev: the parent device
|
|
* @name: hwmon name attribute
|
|
* @drvdata: driver data to attach to created device
|
|
* @groups: List of attribute groups to create
|
|
*
|
|
* Returns the pointer to the new device. The new device is automatically
|
|
* unregistered with the parent device.
|
|
*/
|
|
struct device *
|
|
devm_hwmon_device_register_with_groups(struct device *dev, const char *name,
|
|
void *drvdata,
|
|
const struct attribute_group **groups)
|
|
{
|
|
struct device **ptr, *hwdev;
|
|
|
|
if (!dev)
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
ptr = devres_alloc(devm_hwmon_release, sizeof(*ptr), GFP_KERNEL);
|
|
if (!ptr)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
hwdev = hwmon_device_register_with_groups(dev, name, drvdata, groups);
|
|
if (IS_ERR(hwdev))
|
|
goto error;
|
|
|
|
*ptr = hwdev;
|
|
devres_add(dev, ptr);
|
|
return hwdev;
|
|
|
|
error:
|
|
devres_free(ptr);
|
|
return hwdev;
|
|
}
|
|
EXPORT_SYMBOL_GPL(devm_hwmon_device_register_with_groups);
|
|
|
|
/**
|
|
* devm_hwmon_device_register_with_info - register w/ hwmon
|
|
* @dev: the parent device
|
|
* @name: hwmon name attribute
|
|
* @drvdata: driver data to attach to created device
|
|
* @chip: pointer to hwmon chip information
|
|
* @groups: pointer to list of driver specific attribute groups
|
|
*
|
|
* Returns the pointer to the new device. The new device is automatically
|
|
* unregistered with the parent device.
|
|
*/
|
|
struct device *
|
|
devm_hwmon_device_register_with_info(struct device *dev, const char *name,
|
|
void *drvdata,
|
|
const struct hwmon_chip_info *chip,
|
|
const struct attribute_group **groups)
|
|
{
|
|
struct device **ptr, *hwdev;
|
|
|
|
if (!dev)
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
ptr = devres_alloc(devm_hwmon_release, sizeof(*ptr), GFP_KERNEL);
|
|
if (!ptr)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
hwdev = hwmon_device_register_with_info(dev, name, drvdata, chip,
|
|
groups);
|
|
if (IS_ERR(hwdev))
|
|
goto error;
|
|
|
|
*ptr = hwdev;
|
|
devres_add(dev, ptr);
|
|
|
|
return hwdev;
|
|
|
|
error:
|
|
devres_free(ptr);
|
|
return hwdev;
|
|
}
|
|
EXPORT_SYMBOL_GPL(devm_hwmon_device_register_with_info);
|
|
|
|
static int devm_hwmon_match(struct device *dev, void *res, void *data)
|
|
{
|
|
struct device **hwdev = res;
|
|
|
|
return *hwdev == data;
|
|
}
|
|
|
|
/**
|
|
* devm_hwmon_device_unregister - removes a previously registered hwmon device
|
|
*
|
|
* @dev: the parent device of the device to unregister
|
|
*/
|
|
void devm_hwmon_device_unregister(struct device *dev)
|
|
{
|
|
WARN_ON(devres_release(dev, devm_hwmon_release, devm_hwmon_match, dev));
|
|
}
|
|
EXPORT_SYMBOL_GPL(devm_hwmon_device_unregister);
|
|
|
|
static char *__hwmon_sanitize_name(struct device *dev, const char *old_name)
|
|
{
|
|
char *name, *p;
|
|
|
|
if (dev)
|
|
name = devm_kstrdup(dev, old_name, GFP_KERNEL);
|
|
else
|
|
name = kstrdup(old_name, GFP_KERNEL);
|
|
if (!name)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
for (p = name; *p; p++)
|
|
if (hwmon_is_bad_char(*p))
|
|
*p = '_';
|
|
|
|
return name;
|
|
}
|
|
|
|
/**
|
|
* hwmon_sanitize_name - Replaces invalid characters in a hwmon name
|
|
* @name: NUL-terminated name
|
|
*
|
|
* Allocates a new string where any invalid characters will be replaced
|
|
* by an underscore. It is the responsibility of the caller to release
|
|
* the memory.
|
|
*
|
|
* Returns newly allocated name, or ERR_PTR on error.
|
|
*/
|
|
char *hwmon_sanitize_name(const char *name)
|
|
{
|
|
return __hwmon_sanitize_name(NULL, name);
|
|
}
|
|
EXPORT_SYMBOL_GPL(hwmon_sanitize_name);
|
|
|
|
/**
|
|
* devm_hwmon_sanitize_name - resource managed hwmon_sanitize_name()
|
|
* @dev: device to allocate memory for
|
|
* @name: NUL-terminated name
|
|
*
|
|
* Allocates a new string where any invalid characters will be replaced
|
|
* by an underscore.
|
|
*
|
|
* Returns newly allocated name, or ERR_PTR on error.
|
|
*/
|
|
char *devm_hwmon_sanitize_name(struct device *dev, const char *name)
|
|
{
|
|
if (!dev)
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
return __hwmon_sanitize_name(dev, name);
|
|
}
|
|
EXPORT_SYMBOL_GPL(devm_hwmon_sanitize_name);
|
|
|
|
static void __init hwmon_pci_quirks(void)
|
|
{
|
|
#if defined CONFIG_X86 && defined CONFIG_PCI
|
|
struct pci_dev *sb;
|
|
u16 base;
|
|
u8 enable;
|
|
|
|
/* Open access to 0x295-0x296 on MSI MS-7031 */
|
|
sb = pci_get_device(PCI_VENDOR_ID_ATI, 0x436c, NULL);
|
|
if (sb) {
|
|
if (sb->subsystem_vendor == 0x1462 && /* MSI */
|
|
sb->subsystem_device == 0x0031) { /* MS-7031 */
|
|
pci_read_config_byte(sb, 0x48, &enable);
|
|
pci_read_config_word(sb, 0x64, &base);
|
|
|
|
if (base == 0 && !(enable & BIT(2))) {
|
|
dev_info(&sb->dev,
|
|
"Opening wide generic port at 0x295\n");
|
|
pci_write_config_word(sb, 0x64, 0x295);
|
|
pci_write_config_byte(sb, 0x48,
|
|
enable | BIT(2));
|
|
}
|
|
}
|
|
pci_dev_put(sb);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
static int __init hwmon_init(void)
|
|
{
|
|
int err;
|
|
|
|
hwmon_pci_quirks();
|
|
|
|
err = class_register(&hwmon_class);
|
|
if (err) {
|
|
pr_err("couldn't register hwmon sysfs class\n");
|
|
return err;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void __exit hwmon_exit(void)
|
|
{
|
|
class_unregister(&hwmon_class);
|
|
}
|
|
|
|
subsys_initcall(hwmon_init);
|
|
module_exit(hwmon_exit);
|
|
|
|
MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>");
|
|
MODULE_DESCRIPTION("hardware monitoring sysfs/class support");
|
|
MODULE_LICENSE("GPL");
|
|
|