mirror of
https://github.com/torvalds/linux.git
synced 2024-12-29 22:31:32 +00:00
8d06afab73
Clean up timer initialization by introducing DEFINE_TIMER a'la DEFINE_SPINLOCK. Build and boot-tested on x86. A similar patch has been been in the -RT tree for some time. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
896 lines
23 KiB
C
896 lines
23 KiB
C
/* atari_pamsnet.c PAMsNet device driver for linux68k.
|
|
*
|
|
* Version: @(#)PAMsNet.c 0.2ß 03/31/96
|
|
*
|
|
* Author: Torsten Lang <Torsten.Lang@ap.physik.uni-giessen.de>
|
|
* <Torsten.Lang@jung.de>
|
|
*
|
|
* This driver is based on my driver PAMSDMA.c for MiNT-Net and
|
|
* on the driver bionet.c written by
|
|
* Hartmut Laue <laue@ifk-mp.uni-kiel.de>
|
|
* and Torsten Narjes <narjes@ifk-mp.uni-kiel.de>
|
|
*
|
|
* Little adaptions for integration into pl7 by Roman Hodek
|
|
*
|
|
What is it ?
|
|
------------
|
|
This driver controls the PAMsNet LAN-Adapter which connects
|
|
an ATARI ST/TT via the ACSI-port to an Ethernet-based network.
|
|
|
|
This version can be compiled as a loadable module (See the
|
|
compile command at the bottom of this file).
|
|
At load time, you can optionally set the debugging level and the
|
|
fastest response time on the command line of 'insmod'.
|
|
|
|
'pamsnet_debug'
|
|
controls the amount of diagnostic messages:
|
|
0 : no messages
|
|
>0 : see code for meaning of printed messages
|
|
|
|
'pamsnet_min_poll_time' (always >=1)
|
|
gives the time (in jiffies) between polls. Low values
|
|
increase the system load (beware!)
|
|
|
|
When loaded, a net device with the name 'eth?' becomes available,
|
|
which can be controlled with the usual 'ifconfig' command.
|
|
|
|
It is possible to compile this driver into the kernel like other
|
|
(net) drivers. For this purpose, some source files (e.g. config-files
|
|
makefiles, Space.c) must be changed accordingly. (You may refer to
|
|
other drivers how to do it.) In this case, the device will be detected
|
|
at boot time and (probably) appear as 'eth0'.
|
|
|
|
Theory of Operation
|
|
-------------------
|
|
Because the ATARI DMA port is usually shared between several
|
|
devices (eg. harddisk, floppy) we cannot block the ACSI bus
|
|
while waiting for interrupts. Therefore we use a polling mechanism
|
|
to fetch packets from the adapter. For the same reason, we send
|
|
packets without checking that the previous packet has been sent to
|
|
the LAN. We rely on the higher levels of the networking code to detect
|
|
missing packets and resend them.
|
|
|
|
Before we access the ATARI DMA controller, we check if another
|
|
process is using the DMA. If not, we lock the DMA, perform one or
|
|
more packet transfers and unlock the DMA before returning.
|
|
We do not use 'stdma_lock' unconditionally because it is unclear
|
|
if the networking code can be set to sleep, which will happen if
|
|
another (possibly slow) device is using the DMA controller.
|
|
|
|
The polling is done via timer interrupts which periodically
|
|
'simulate' an interrupt from the Ethernet adapter. The time (in jiffies)
|
|
between polls varies depending on an estimate of the net activity.
|
|
The allowed range is given by the variable 'bionet_min_poll_time'
|
|
for the lower (fastest) limit and the constant 'MAX_POLL_TIME'
|
|
for the higher (slowest) limit.
|
|
|
|
Whenever a packet arrives, we switch to fastest response by setting
|
|
the polling time to its lowest limit. If the following poll fails,
|
|
because no packets have arrived, we increase the time for the next
|
|
poll. When the net activity is low, the polling time effectively
|
|
stays at its maximum value, resulting in the lowest load for the
|
|
machine.
|
|
*/
|
|
|
|
#define MAX_POLL_TIME 10
|
|
|
|
static char *version =
|
|
"pamsnet.c:v0.2beta 30-mar-96 (c) Torsten Lang.\n";
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/types.h>
|
|
#include <linux/fcntl.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/in.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/string.h>
|
|
#include <linux/bitops.h>
|
|
#include <asm/system.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/io.h>
|
|
#include <asm/dma.h>
|
|
#include <linux/errno.h>
|
|
#include <asm/atarihw.h>
|
|
#include <asm/atariints.h>
|
|
#include <asm/atari_stdma.h>
|
|
#include <asm/atari_acsi.h>
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
|
|
#undef READ
|
|
#undef WRITE
|
|
|
|
/* use 0 for production, 1 for verification, >2 for debug
|
|
*/
|
|
#ifndef NET_DEBUG
|
|
#define NET_DEBUG 0
|
|
#endif
|
|
/*
|
|
* Global variable 'pamsnet_debug'. Can be set at load time by 'insmod'
|
|
*/
|
|
unsigned int pamsnet_debug = NET_DEBUG;
|
|
MODULE_PARM(pamsnet_debug, "i");
|
|
MODULE_PARM_DESC(pamsnet_debug, "pamsnet debug enable (0-1)");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static unsigned int pamsnet_min_poll_time = 2;
|
|
|
|
|
|
/* Information that need to be kept for each board.
|
|
*/
|
|
struct net_local {
|
|
struct net_device_stats stats;
|
|
long open_time; /* for debugging */
|
|
int poll_time; /* polling time varies with net load */
|
|
};
|
|
|
|
static struct nic_pkt_s { /* packet format */
|
|
unsigned char buffer[2048];
|
|
} *nic_packet = 0;
|
|
unsigned char *phys_nic_packet;
|
|
|
|
typedef unsigned char HADDR[6]; /* 6-byte hardware address of lance */
|
|
|
|
/* Index to functions, as function prototypes.
|
|
*/
|
|
static void start (int target);
|
|
static int stop (int target);
|
|
static int testpkt (int target);
|
|
static int sendpkt (int target, unsigned char *buffer, int length);
|
|
static int receivepkt (int target, unsigned char *buffer);
|
|
static int inquiry (int target, unsigned char *buffer);
|
|
static HADDR *read_hw_addr(int target, unsigned char *buffer);
|
|
static void setup_dma (void *address, unsigned rw_flag, int num_blocks);
|
|
static int send_first (int target, unsigned char byte);
|
|
static int send_1_5 (int lun, unsigned char *command, int dma);
|
|
static int get_status (void);
|
|
static int calc_received (void *start_address);
|
|
|
|
static int pamsnet_open(struct net_device *dev);
|
|
static int pamsnet_send_packet(struct sk_buff *skb, struct net_device *dev);
|
|
static void pamsnet_poll_rx(struct net_device *);
|
|
static int pamsnet_close(struct net_device *dev);
|
|
static struct net_device_stats *net_get_stats(struct net_device *dev);
|
|
static void pamsnet_tick(unsigned long);
|
|
|
|
static irqreturn_t pamsnet_intr(int irq, void *data, struct pt_regs *fp);
|
|
|
|
static DEFINE_TIMER(pamsnet_timer, pamsnet_tick, 0, 0);
|
|
|
|
#define STRAM_ADDR(a) (((a) & 0xff000000) == 0)
|
|
|
|
typedef struct
|
|
{
|
|
unsigned char reserved1[0x38];
|
|
HADDR hwaddr;
|
|
unsigned char reserved2[0x1c2];
|
|
} DMAHWADDR;
|
|
|
|
/*
|
|
* Definitions of commands understood by the PAMs DMA adaptor.
|
|
*
|
|
* In general the DMA adaptor uses LUN 0, 5, 6 and 7 on one ID changeable
|
|
* by the PAM's Net software.
|
|
*
|
|
* LUN 0 works as a harddisk. You can boot the PAM's Net driver there.
|
|
* LUN 5 works as a harddisk and lets you access the RAM and some I/O HW
|
|
* area. In sector 0, bytes 0x38-0x3d you find the ethernet HW address
|
|
* of the adaptor.
|
|
* LUN 6 works as a harddisk and lets you access the firmware ROM.
|
|
* LUN 7 lets you send and receive packets.
|
|
*
|
|
* Some commands like the INQUIRY command work identical on all used LUNs.
|
|
*
|
|
* UNKNOWN1 seems to read some data.
|
|
* Command length is 6 bytes.
|
|
* UNKNOWN2 seems to read some data (command byte 1 must be !=0). The
|
|
* following bytes seem to be something like an allocation length.
|
|
* Command length is 6 bytes.
|
|
* READPKT reads a packet received by the DMA adaptor.
|
|
* Command length is 6 bytes.
|
|
* WRITEPKT sends a packet transferred by the following DMA phase. The length
|
|
* of the packet is transferred in command bytes 3 and 4.
|
|
* The adaptor automatically replaces the src hw address in an ethernet
|
|
* packet by its own hw address.
|
|
* Command length is 6 bytes.
|
|
* INQUIRY has the same function as the INQUIRY command supported by harddisks
|
|
* and other SCSI devices. It lets you detect which device you found
|
|
* at a given address.
|
|
* Command length is 6 bytes.
|
|
* START initializes the DMA adaptor. After this command it is able to send
|
|
* and receive packets. There is no status byte returned!
|
|
* Command length is 1 byte.
|
|
* NUMPKTS gives back the number of received packets waiting in the queue in
|
|
* the status byte.
|
|
* Command length is 1 byte.
|
|
* UNKNOWN3
|
|
* UNKNOWN4 Function of these three commands is unknown.
|
|
* UNKNOWN5 The command length of these three commands is 1 byte.
|
|
* DESELECT immediately deselects the DMA adaptor. May important with interrupt
|
|
* driven operation.
|
|
* Command length is 1 byte.
|
|
* STOP resets the DMA adaptor. After this command packets can no longer
|
|
* be received or transferred.
|
|
* Command length is 6 byte.
|
|
*/
|
|
|
|
enum {UNKNOWN1=3, READPKT=8, UNKNOWN2, WRITEPKT=10, INQUIRY=18, START,
|
|
NUMPKTS=22, UNKNOWN3, UNKNOWN4, UNKNOWN5, DESELECT, STOP};
|
|
|
|
#define READSECTOR READPKT
|
|
#define WRITESECTOR WRITEPKT
|
|
|
|
u_char *inquire8="MV PAM's NET/GK";
|
|
|
|
#define DMALOW dma_wd.dma_lo
|
|
#define DMAMID dma_wd.dma_md
|
|
#define DMAHIGH dma_wd.dma_hi
|
|
#define DACCESS dma_wd.fdc_acces_seccount
|
|
|
|
#define MFP_GPIP mfp.par_dt_reg
|
|
|
|
/* Some useful functions */
|
|
|
|
#define INT (!(MFP_GPIP & 0x20))
|
|
#define DELAY ({MFP_GPIP; MFP_GPIP; MFP_GPIP;})
|
|
#define WRITEMODE(value) \
|
|
({ u_short dummy = value; \
|
|
__asm__ volatile("movew %0, 0xFFFF8606" : : "d"(dummy)); \
|
|
DELAY; \
|
|
})
|
|
#define WRITEBOTH(value1, value2) \
|
|
({ u_long dummy = (u_long)(value1)<<16 | (u_short)(value2); \
|
|
__asm__ volatile("movel %0, 0xFFFF8604" : : "d"(dummy)); \
|
|
DELAY; \
|
|
})
|
|
|
|
/* Definitions for DMODE */
|
|
|
|
#define READ 0x000
|
|
#define WRITE 0x100
|
|
|
|
#define DMA_FDC 0x080
|
|
#define DMA_ACSI 0x000
|
|
|
|
#define DMA_DISABLE 0x040
|
|
|
|
#define SEC_COUNT 0x010
|
|
#define DMA_WINDOW 0x000
|
|
|
|
#define REG_ACSI 0x008
|
|
#define REG_FDC 0x000
|
|
|
|
#define A1 0x002
|
|
|
|
/* Timeout constants */
|
|
|
|
#define TIMEOUTCMD HZ/2 /* ca. 500ms */
|
|
#define TIMEOUTDMA HZ /* ca. 1s */
|
|
#define COMMAND_DELAY 500 /* ca. 0.5ms */
|
|
|
|
unsigned rw;
|
|
int lance_target = -1;
|
|
int if_up = 0;
|
|
|
|
/* The following routines access the ethernet board connected to the
|
|
* ACSI port via the st_dma chip.
|
|
*/
|
|
|
|
/* The following lowlevel routines work on physical addresses only and assume
|
|
* that eventually needed buffers are
|
|
* - completely located in ST RAM
|
|
* - are contigous in the physical address space
|
|
*/
|
|
|
|
/* Setup the DMA counter */
|
|
|
|
static void
|
|
setup_dma (address, rw_flag, num_blocks)
|
|
void *address;
|
|
unsigned rw_flag;
|
|
int num_blocks;
|
|
{
|
|
WRITEMODE((unsigned) rw_flag | DMA_FDC | SEC_COUNT | REG_ACSI |
|
|
A1);
|
|
WRITEMODE((unsigned)(rw_flag ^ WRITE) | DMA_FDC | SEC_COUNT | REG_ACSI |
|
|
A1);
|
|
WRITEMODE((unsigned) rw_flag | DMA_FDC | SEC_COUNT | REG_ACSI |
|
|
A1);
|
|
DMALOW = (unsigned char)((unsigned long)address & 0xFF);
|
|
DMAMID = (unsigned char)(((unsigned long)address >> 8) & 0xFF);
|
|
DMAHIGH = (unsigned char)(((unsigned long)address >> 16) & 0xFF);
|
|
WRITEBOTH((unsigned)num_blocks & 0xFF,
|
|
rw_flag | DMA_FDC | DMA_WINDOW | REG_ACSI | A1);
|
|
rw = rw_flag;
|
|
}
|
|
|
|
/* Send the first byte of an command block */
|
|
|
|
static int
|
|
send_first (target, byte)
|
|
int target;
|
|
unsigned char byte;
|
|
{
|
|
rw = READ;
|
|
acsi_delay_end(COMMAND_DELAY);
|
|
/*
|
|
* wake up ACSI
|
|
*/
|
|
WRITEMODE(DMA_FDC | DMA_WINDOW | REG_ACSI);
|
|
/*
|
|
* write command byte
|
|
*/
|
|
WRITEBOTH((target << 5) | (byte & 0x1F), DMA_FDC |
|
|
DMA_WINDOW | REG_ACSI | A1);
|
|
return (!acsi_wait_for_IRQ(TIMEOUTCMD));
|
|
}
|
|
|
|
/* Send the rest of an command block */
|
|
|
|
static int
|
|
send_1_5 (lun, command, dma)
|
|
int lun;
|
|
unsigned char *command;
|
|
int dma;
|
|
{
|
|
int i, j;
|
|
|
|
for (i=0; i<5; i++) {
|
|
WRITEBOTH((!i ? (((lun & 0x7) << 5) | (command[i] & 0x1F))
|
|
: command[i]),
|
|
rw | REG_ACSI | DMA_WINDOW |
|
|
((i < 4) ? DMA_FDC
|
|
: (dma ? DMA_ACSI
|
|
: DMA_FDC)) | A1);
|
|
if (i < 4 && (j = !acsi_wait_for_IRQ(TIMEOUTCMD)))
|
|
return (j);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
/* Read a status byte */
|
|
|
|
static int
|
|
get_status (void)
|
|
{
|
|
WRITEMODE(DMA_FDC | DMA_WINDOW | REG_ACSI | A1);
|
|
acsi_delay_start();
|
|
return ((int)(DACCESS & 0xFF));
|
|
}
|
|
|
|
/* Calculate the number of received bytes */
|
|
|
|
static int
|
|
calc_received (start_address)
|
|
void *start_address;
|
|
{
|
|
return (int)(
|
|
(((unsigned long)DMAHIGH << 16) | ((unsigned)DMAMID << 8) | DMALOW)
|
|
- (unsigned long)start_address);
|
|
}
|
|
|
|
/* The following midlevel routines still work on physical addresses ... */
|
|
|
|
/* start() starts the PAM's DMA adaptor */
|
|
|
|
static void
|
|
start (target)
|
|
int target;
|
|
{
|
|
send_first(target, START);
|
|
}
|
|
|
|
/* stop() stops the PAM's DMA adaptor and returns a value of zero in case of success */
|
|
|
|
static int
|
|
stop (target)
|
|
int target;
|
|
{
|
|
int ret = -1;
|
|
unsigned char cmd_buffer[5];
|
|
|
|
if (send_first(target, STOP))
|
|
goto bad;
|
|
cmd_buffer[0] = cmd_buffer[1] = cmd_buffer[2] =
|
|
cmd_buffer[3] = cmd_buffer[4] = 0;
|
|
if (send_1_5(7, cmd_buffer, 0) ||
|
|
!acsi_wait_for_IRQ(TIMEOUTDMA) ||
|
|
get_status())
|
|
goto bad;
|
|
ret = 0;
|
|
bad:
|
|
return (ret);
|
|
}
|
|
|
|
/* testpkt() returns the number of received packets waiting in the queue */
|
|
|
|
static int
|
|
testpkt(target)
|
|
int target;
|
|
{
|
|
int ret = -1;
|
|
|
|
if (send_first(target, NUMPKTS))
|
|
goto bad;
|
|
ret = get_status();
|
|
bad:
|
|
return (ret);
|
|
}
|
|
|
|
/* inquiry() returns 0 when PAM's DMA found, -1 when timeout, -2 otherwise */
|
|
/* Please note: The buffer is for internal use only but must be defined! */
|
|
|
|
static int
|
|
inquiry (target, buffer)
|
|
int target;
|
|
unsigned char *buffer;
|
|
{
|
|
int ret = -1;
|
|
unsigned char *vbuffer = phys_to_virt((unsigned long)buffer);
|
|
unsigned char cmd_buffer[5];
|
|
|
|
if (send_first(target, INQUIRY))
|
|
goto bad;
|
|
setup_dma(buffer, READ, 1);
|
|
vbuffer[8] = vbuffer[27] = 0; /* Avoid confusion with previous read data */
|
|
cmd_buffer[0] = cmd_buffer[1] = cmd_buffer[2] = cmd_buffer[4] = 0;
|
|
cmd_buffer[3] = 48;
|
|
if (send_1_5(5, cmd_buffer, 1) ||
|
|
!acsi_wait_for_IRQ(TIMEOUTDMA) ||
|
|
get_status() ||
|
|
(calc_received(buffer) < 32))
|
|
goto bad;
|
|
dma_cache_maintenance((unsigned long)(buffer+8), 20, 0);
|
|
if (memcmp(inquire8, vbuffer+8, 20))
|
|
goto bad;
|
|
ret = 0;
|
|
bad:
|
|
if (!!NET_DEBUG) {
|
|
vbuffer[8+20]=0;
|
|
printk("inquiry of target %d: %s\n", target, vbuffer+8);
|
|
}
|
|
return (ret);
|
|
}
|
|
|
|
/*
|
|
* read_hw_addr() reads the sector containing the hwaddr and returns
|
|
* a pointer to it (virtual address!) or 0 in case of an error
|
|
*/
|
|
|
|
static HADDR
|
|
*read_hw_addr(target, buffer)
|
|
int target;
|
|
unsigned char *buffer;
|
|
{
|
|
HADDR *ret = 0;
|
|
unsigned char cmd_buffer[5];
|
|
|
|
if (send_first(target, READSECTOR))
|
|
goto bad;
|
|
setup_dma(buffer, READ, 1);
|
|
cmd_buffer[0] = cmd_buffer[1] = cmd_buffer[2] = cmd_buffer[4] = 0;
|
|
cmd_buffer[3] = 1;
|
|
if (send_1_5(5, cmd_buffer, 1) ||
|
|
!acsi_wait_for_IRQ(TIMEOUTDMA) ||
|
|
get_status())
|
|
goto bad;
|
|
ret = phys_to_virt((unsigned long)&(((DMAHWADDR *)buffer)->hwaddr));
|
|
dma_cache_maintenance((unsigned long)buffer, 512, 0);
|
|
bad:
|
|
return (ret);
|
|
}
|
|
|
|
static irqreturn_t
|
|
pamsnet_intr(irq, data, fp)
|
|
int irq;
|
|
void *data;
|
|
struct pt_regs *fp;
|
|
{
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* receivepkt() loads a packet to a given buffer and returns its length */
|
|
|
|
static int
|
|
receivepkt (target, buffer)
|
|
int target;
|
|
unsigned char *buffer;
|
|
{
|
|
int ret = -1;
|
|
unsigned char cmd_buffer[5];
|
|
|
|
if (send_first(target, READPKT))
|
|
goto bad;
|
|
setup_dma(buffer, READ, 3);
|
|
cmd_buffer[0] = cmd_buffer[1] = cmd_buffer[2] = cmd_buffer[4] = 0;
|
|
cmd_buffer[3] = 3;
|
|
if (send_1_5(7, cmd_buffer, 1) ||
|
|
!acsi_wait_for_IRQ(TIMEOUTDMA) ||
|
|
get_status())
|
|
goto bad;
|
|
ret = calc_received(buffer);
|
|
bad:
|
|
return (ret);
|
|
}
|
|
|
|
/* sendpkt() sends a packet and returns a value of zero when the packet was sent
|
|
successfully */
|
|
|
|
static int
|
|
sendpkt (target, buffer, length)
|
|
int target;
|
|
unsigned char *buffer;
|
|
int length;
|
|
{
|
|
int ret = -1;
|
|
unsigned char cmd_buffer[5];
|
|
|
|
if (send_first(target, WRITEPKT))
|
|
goto bad;
|
|
setup_dma(buffer, WRITE, 3);
|
|
cmd_buffer[0] = cmd_buffer[1] = cmd_buffer[4] = 0;
|
|
cmd_buffer[2] = length >> 8;
|
|
cmd_buffer[3] = length & 0xFF;
|
|
if (send_1_5(7, cmd_buffer, 1) ||
|
|
!acsi_wait_for_IRQ(TIMEOUTDMA) ||
|
|
get_status())
|
|
goto bad;
|
|
ret = 0;
|
|
bad:
|
|
return (ret);
|
|
}
|
|
|
|
/* The following higher level routines work on virtual addresses and convert them to
|
|
* physical addresses when passed to the lowlevel routines. It's up to the higher level
|
|
* routines to copy data from Alternate RAM to ST RAM if neccesary!
|
|
*/
|
|
|
|
/* Check for a network adaptor of this type, and return '0' if one exists.
|
|
*/
|
|
|
|
struct net_device * __init pamsnet_probe (int unit)
|
|
{
|
|
struct net_device *dev;
|
|
int i;
|
|
HADDR *hwaddr;
|
|
int err;
|
|
|
|
unsigned char station_addr[6];
|
|
static unsigned version_printed;
|
|
/* avoid "Probing for..." printed 4 times - the driver is supporting only one adapter now! */
|
|
static int no_more_found;
|
|
|
|
if (no_more_found)
|
|
return ERR_PTR(-ENODEV);
|
|
no_more_found = 1;
|
|
|
|
dev = alloc_etherdev(sizeof(struct net_local));
|
|
if (!dev)
|
|
return ERR_PTR(-ENOMEM);
|
|
if (unit >= 0) {
|
|
sprintf(dev->name, "eth%d", unit);
|
|
netdev_boot_setup_check(dev);
|
|
}
|
|
SET_MODULE_OWNER(dev);
|
|
|
|
printk("Probing for PAM's Net/GK Adapter...\n");
|
|
|
|
/* Allocate the DMA buffer here since we need it for probing! */
|
|
|
|
nic_packet = (struct nic_pkt_s *)acsi_buffer;
|
|
phys_nic_packet = (unsigned char *)phys_acsi_buffer;
|
|
if (pamsnet_debug > 0) {
|
|
printk("nic_packet at 0x%p, phys at 0x%p\n",
|
|
nic_packet, phys_nic_packet );
|
|
}
|
|
|
|
stdma_lock(pamsnet_intr, NULL);
|
|
DISABLE_IRQ();
|
|
|
|
for (i=0; i<8; i++) {
|
|
/* Do two inquiries to cover cases with strange equipment on previous ID */
|
|
/* blocking the ACSI bus (like the SLMC804 laser printer controller... */
|
|
inquiry(i, phys_nic_packet);
|
|
if (!inquiry(i, phys_nic_packet)) {
|
|
lance_target = i;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!!NET_DEBUG)
|
|
printk("ID: %d\n",i);
|
|
|
|
if (lance_target >= 0) {
|
|
if (!(hwaddr = read_hw_addr(lance_target, phys_nic_packet)))
|
|
lance_target = -1;
|
|
else
|
|
memcpy (station_addr, hwaddr, ETH_ALEN);
|
|
}
|
|
|
|
ENABLE_IRQ();
|
|
stdma_release();
|
|
|
|
if (lance_target < 0) {
|
|
printk("No PAM's Net/GK found.\n");
|
|
free_netdev(dev);
|
|
return ERR_PTR(-ENODEV);
|
|
}
|
|
|
|
if (pamsnet_debug > 0 && version_printed++ == 0)
|
|
printk(version);
|
|
|
|
printk("%s: %s found on target %01d, eth-addr: %02x:%02x:%02x:%02x:%02x:%02x.\n",
|
|
dev->name, "PAM's Net/GK", lance_target,
|
|
station_addr[0], station_addr[1], station_addr[2],
|
|
station_addr[3], station_addr[4], station_addr[5]);
|
|
|
|
/* Initialize the device structure. */
|
|
dev->open = pamsnet_open;
|
|
dev->stop = pamsnet_close;
|
|
dev->hard_start_xmit = pamsnet_send_packet;
|
|
dev->get_stats = net_get_stats;
|
|
|
|
/* Fill in the fields of the device structure with ethernet-generic
|
|
* values. This should be in a common file instead of per-driver.
|
|
*/
|
|
|
|
for (i = 0; i < ETH_ALEN; i++) {
|
|
#if 0
|
|
dev->broadcast[i] = 0xff;
|
|
#endif
|
|
dev->dev_addr[i] = station_addr[i];
|
|
}
|
|
err = register_netdev(dev);
|
|
if (!err)
|
|
return dev;
|
|
|
|
free_netdev(dev);
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
/* Open/initialize the board. This is called (in the current kernel)
|
|
sometime after booting when the 'ifconfig' program is run.
|
|
|
|
This routine should set everything up anew at each open, even
|
|
registers that "should" only need to be set once at boot, so that
|
|
there is non-reboot way to recover if something goes wrong.
|
|
*/
|
|
static int
|
|
pamsnet_open(struct net_device *dev) {
|
|
struct net_local *lp = netdev_priv(dev);
|
|
|
|
if (pamsnet_debug > 0)
|
|
printk("pamsnet_open\n");
|
|
stdma_lock(pamsnet_intr, NULL);
|
|
DISABLE_IRQ();
|
|
|
|
/* Reset the hardware here.
|
|
*/
|
|
if (!if_up)
|
|
start(lance_target);
|
|
if_up = 1;
|
|
lp->open_time = 0; /*jiffies*/
|
|
lp->poll_time = MAX_POLL_TIME;
|
|
|
|
dev->tbusy = 0;
|
|
dev->interrupt = 0;
|
|
dev->start = 1;
|
|
|
|
ENABLE_IRQ();
|
|
stdma_release();
|
|
pamsnet_timer.data = (long)dev;
|
|
pamsnet_timer.expires = jiffies + lp->poll_time;
|
|
add_timer(&pamsnet_timer);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
pamsnet_send_packet(struct sk_buff *skb, struct net_device *dev) {
|
|
struct net_local *lp = netdev_priv(dev);
|
|
unsigned long flags;
|
|
|
|
/* Block a timer-based transmit from overlapping. This could better be
|
|
* done with atomic_swap(1, dev->tbusy), but set_bit() works as well.
|
|
*/
|
|
local_irq_save(flags);
|
|
|
|
if (stdma_islocked()) {
|
|
local_irq_restore(flags);
|
|
lp->stats.tx_errors++;
|
|
}
|
|
else {
|
|
int length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
|
|
unsigned long buf = virt_to_phys(skb->data);
|
|
int stat;
|
|
|
|
stdma_lock(pamsnet_intr, NULL);
|
|
DISABLE_IRQ();
|
|
|
|
local_irq_restore(flags);
|
|
if( !STRAM_ADDR(buf+length-1) ) {
|
|
memcpy(nic_packet->buffer, skb->data, length);
|
|
buf = (unsigned long)phys_nic_packet;
|
|
}
|
|
|
|
dma_cache_maintenance(buf, length, 1);
|
|
|
|
stat = sendpkt(lance_target, (unsigned char *)buf, length);
|
|
ENABLE_IRQ();
|
|
stdma_release();
|
|
|
|
dev->trans_start = jiffies;
|
|
dev->tbusy = 0;
|
|
lp->stats.tx_packets++;
|
|
lp->stats.tx_bytes+=length;
|
|
}
|
|
dev_kfree_skb(skb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* We have a good packet(s), get it/them out of the buffers.
|
|
*/
|
|
static void
|
|
pamsnet_poll_rx(struct net_device *dev) {
|
|
struct net_local *lp = netdev_priv(dev);
|
|
int boguscount;
|
|
int pkt_len;
|
|
struct sk_buff *skb;
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
/* ++roman: Take care at locking the ST-DMA... This must be done with ints
|
|
* off, since otherwise an int could slip in between the question and the
|
|
* locking itself, and then we'd go to sleep... And locking itself is
|
|
* necessary to keep the floppy_change timer from working with ST-DMA
|
|
* registers. */
|
|
if (stdma_islocked()) {
|
|
local_irq_restore(flags);
|
|
return;
|
|
}
|
|
stdma_lock(pamsnet_intr, NULL);
|
|
DISABLE_IRQ();
|
|
local_irq_restore(flags);
|
|
|
|
boguscount = testpkt(lance_target);
|
|
if( lp->poll_time < MAX_POLL_TIME ) lp->poll_time++;
|
|
|
|
while(boguscount--) {
|
|
pkt_len = receivepkt(lance_target, phys_nic_packet);
|
|
|
|
if( pkt_len < 60 ) break;
|
|
|
|
/* Good packet... */
|
|
|
|
dma_cache_maintenance((unsigned long)phys_nic_packet, pkt_len, 0);
|
|
|
|
lp->poll_time = pamsnet_min_poll_time; /* fast poll */
|
|
if( pkt_len >= 60 && pkt_len <= 2048 ) {
|
|
if (pkt_len > 1514)
|
|
pkt_len = 1514;
|
|
|
|
/* Malloc up new buffer.
|
|
*/
|
|
skb = alloc_skb(pkt_len, GFP_ATOMIC);
|
|
if (skb == NULL) {
|
|
printk("%s: Memory squeeze, dropping packet.\n",
|
|
dev->name);
|
|
lp->stats.rx_dropped++;
|
|
break;
|
|
}
|
|
skb->len = pkt_len;
|
|
skb->dev = dev;
|
|
|
|
/* 'skb->data' points to the start of sk_buff data area.
|
|
*/
|
|
memcpy(skb->data, nic_packet->buffer, pkt_len);
|
|
netif_rx(skb);
|
|
dev->last_rx = jiffies;
|
|
lp->stats.rx_packets++;
|
|
lp->stats.rx_bytes+=pkt_len;
|
|
}
|
|
}
|
|
|
|
/* If any worth-while packets have been received, dev_rint()
|
|
has done a mark_bh(INET_BH) for us and will work on them
|
|
when we get to the bottom-half routine.
|
|
*/
|
|
|
|
ENABLE_IRQ();
|
|
stdma_release();
|
|
return;
|
|
}
|
|
|
|
/* pamsnet_tick: called by pamsnet_timer. Reads packets from the adapter,
|
|
* passes them to the higher layers and restarts the timer.
|
|
*/
|
|
static void
|
|
pamsnet_tick(unsigned long data) {
|
|
struct net_device *dev = (struct net_device *)data;
|
|
struct net_local *lp = netdev_priv(dev);
|
|
|
|
if( pamsnet_debug > 0 && (lp->open_time++ & 7) == 8 )
|
|
printk("pamsnet_tick: %ld\n", lp->open_time);
|
|
|
|
pamsnet_poll_rx(dev);
|
|
|
|
pamsnet_timer.expires = jiffies + lp->poll_time;
|
|
add_timer(&pamsnet_timer);
|
|
}
|
|
|
|
/* The inverse routine to pamsnet_open().
|
|
*/
|
|
static int
|
|
pamsnet_close(struct net_device *dev) {
|
|
struct net_local *lp = netdev_priv(dev);
|
|
|
|
if (pamsnet_debug > 0)
|
|
printk("pamsnet_close, open_time=%ld\n", lp->open_time);
|
|
del_timer(&pamsnet_timer);
|
|
stdma_lock(pamsnet_intr, NULL);
|
|
DISABLE_IRQ();
|
|
|
|
if (if_up)
|
|
stop(lance_target);
|
|
if_up = 0;
|
|
|
|
lp->open_time = 0;
|
|
|
|
dev->tbusy = 1;
|
|
dev->start = 0;
|
|
|
|
ENABLE_IRQ();
|
|
stdma_release();
|
|
return 0;
|
|
}
|
|
|
|
/* Get the current statistics.
|
|
This may be called with the card open or closed.
|
|
*/
|
|
static struct net_device_stats *net_get_stats(struct net_device *dev)
|
|
{
|
|
struct net_local *lp = netdev_priv(dev);
|
|
return &lp->stats;
|
|
}
|
|
|
|
|
|
#ifdef MODULE
|
|
|
|
static struct net_device *pam_dev;
|
|
|
|
int init_module(void)
|
|
{
|
|
pam_dev = pamsnet_probe(-1);
|
|
if (IS_ERR(pam_dev))
|
|
return PTR_ERR(pam_dev);
|
|
return 0;
|
|
}
|
|
|
|
void cleanup_module(void)
|
|
{
|
|
unregister_netdev(pam_dev);
|
|
free_netdev(pam_dev);
|
|
}
|
|
|
|
#endif /* MODULE */
|
|
|
|
/* Local variables:
|
|
* compile-command: "gcc -D__KERNEL__ -I/usr/src/linux/include
|
|
-b m68k-linuxaout -Wall -Wstrict-prototypes -O2
|
|
-fomit-frame-pointer -pipe -DMODULE -I../../net/inet -c atari_pamsnet.c"
|
|
* version-control: t
|
|
* kept-new-versions: 5
|
|
* tab-width: 8
|
|
* End:
|
|
*/
|