linux/drivers/scsi
Xiang Chen 37359798ec scsi: hisi_sas: Add support for interrupt coalescing for v3 hw
If INT_COAL_EN is enabled, configure time and count of interrupt
coalescing.  Then if CQ collects count of CQ entries in time, it will
report the interrupt. Or if CQ doesn't collect enough CQ entries in time,
it will report the interrupt at timeout.

As all the registers are not supported to be changed dynamically, we need
to config those register between disable and enable PHYs.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-15 14:37:05 -05:00
..
aacraid SCSI misc on 20181024 2018-10-25 07:40:30 -07:00
aic7xxx scsi: aic7xxx: remove set but not used variable 'shared_scb_data' 2018-09-17 02:34:16 -04:00
aic94xx scsi: aic94xx: fully convert to the generic DMA API 2018-10-17 21:58:51 -04:00
arcmsr scsi: arcmsr: use dma_set_mask 2018-11-15 14:26:28 -05:00
arm treewide: kmalloc() -> kmalloc_array() 2018-06-12 16:19:22 -07:00
be2iscsi SCSI misc on 20181024 2018-10-25 07:40:30 -07:00
bfa scsi: bfa: use dma_set_mask_and_coherent 2018-11-15 14:27:07 -05:00
bnx2fc SCSI misc on 20181024 2018-10-25 07:40:30 -07:00
bnx2i scsi: bnx2i: add error handling for ioremap_nocache 2018-06-19 22:02:25 -04:00
csiostor SCSI misc on 20181024 2018-10-25 07:40:30 -07:00
cxgbi SCSI misc on 20181024 2018-10-25 07:40:30 -07:00
cxlflash SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
device_handler Merge branch 'fixes' into misc 2018-04-03 17:38:39 -07:00
dpt
esas2r scsi: esas2r: use dma_set_mask_and_coherent 2018-11-15 14:27:08 -05:00
fcoe SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
fnic scsi: fnic: replace gross legacy tag hack with blk-mq hack 2018-10-17 22:06:04 -04:00
hisi_sas scsi: hisi_sas: Add support for interrupt coalescing for v3 hw 2018-11-15 14:37:05 -05:00
ibmvscsi scsi: ibmvscsi: change strncpy+truncation to strlcpy 2018-07-30 23:17:53 -04:00
ibmvscsi_tgt SCSI misc on 20181024 2018-10-25 07:40:30 -07:00
isci scsi: isci: use dma_set_mask_and_coherent 2018-11-15 14:27:08 -05:00
libfc scsi: libfc: retry PRLI if we cannot analyse the payload 2018-10-15 23:53:37 -04:00
libsas scsi: libsas: fix a race condition when smp task timeout 2018-09-25 21:20:23 -04:00
lpfc scsi: lpfc: use dma_set_mask_and_coherent 2018-11-15 14:27:08 -05:00
megaraid scsi: megaraid_sas: Update driver version 2018-11-06 20:33:57 -05:00
mpt3sas scsi: mpt3sas: Bump driver version to 27.100.00.00 2018-11-06 20:16:01 -05:00
mvsas scsi: mvsas: Remove set but not used variable 'id' 2018-10-23 21:36:02 -04:00
osd scsi: osd: initiator should use mq variant of request ending 2018-10-16 17:48:35 -04:00
pcmcia scsi: aha152x: rename the PCMCIA define 2018-11-02 00:15:23 +09:00
pm8001 scsi: pm8001: switch to generic DMA API 2018-10-17 21:58:52 -04:00
qedf scsi: qedf: fully convert to the generic DMA API 2018-10-17 21:58:53 -04:00
qedi SCSI misc on 20181024 2018-10-25 07:40:30 -07:00
qla2xxx scsi: qla2xxx: use lower_32_bits and upper_32_bits instead of reinventing them 2018-11-06 21:31:29 -05:00
qla4xxx scsi: qla4xxx: remvoe unnecessary condition check for mempool_destroy() 2018-11-06 21:20:18 -05:00
smartpqi scsi: smartpqi: fully convert to the generic DMA API 2018-10-17 21:58:53 -04:00
snic scsi: snic: switch to generic DMA API 2018-10-17 21:58:53 -04:00
sym53c8xx_2 scsi: sym53c8xx: use dma_set_mask 2018-11-15 14:27:08 -05:00
ufs scsi: ufs: Add UFS platform driver for Cadence UFS 2018-11-09 07:58:42 -05:00
.gitignore scsi: scsi_devinfo: Add scsi_devinfo_tbl.c 2017-10-25 05:40:22 -04:00
3w-9xxx.c scsi: 3w-sas: 3w-9xxx: Use unsigned char for cdb 2018-10-23 21:27:53 -04:00
3w-9xxx.h scsi: 3w-9xxx: rework lock timeouts 2017-12-04 20:32:53 -05:00
3w-sas.c scsi: 3w-sas: 3w-9xxx: Use unsigned char for cdb 2018-10-23 21:27:53 -04:00
3w-sas.h
3w-xxxx.c scsi: 3w-xxx: fully convert to the generic DMA API 2018-10-17 21:58:51 -04:00
3w-xxxx.h scsi: 3w-xxx: fully convert to the generic DMA API 2018-10-17 21:58:51 -04:00
53c700_d.h_shipped
53c700.c scsi: 53c700: move bus reset to host reset 2017-08-25 17:21:11 -04:00
53c700.h scsi: 53c700: Fix spelling of 'NEGOTIATION' 2018-08-30 07:27:22 -04:00
53c700.scr
a100u2w.c scsi: a100u2w: switch to generic DMA API 2018-10-17 21:58:51 -04:00
a100u2w.h
a2091.c scsi: drop bus reset for wd33c93-compatible boards 2017-08-25 17:21:10 -04:00
a2091.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
a3000.c scsi: drop bus reset for wd33c93-compatible boards 2017-08-25 17:21:10 -04:00
a3000.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
a4000t.c
advansys.c scsi: advansys: remove unused variable 'srb_tag' in adv_isr_callback 2018-10-17 21:01:59 -04:00
aha152x.c scsi: aha152x: rename the PCMCIA define 2018-11-02 00:15:23 +09:00
aha152x.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
aha1542.c treewide: kmalloc() -> kmalloc_array() 2018-06-12 16:19:22 -07:00
aha1542.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
aha1740.c scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
aha1740.h scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
am53c974.c scsi: esp_scsi: move dma mapping into the core code 2018-10-15 23:00:38 -04:00
atari_scsi.c scsi: NCR5380: Move bus reset to host reset 2017-08-25 17:21:11 -04:00
atp870u.c scsi: atp870u: switch to generic DMA API 2018-10-17 21:58:52 -04:00
atp870u.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
BusLogic.c scsi: BusLogic: switch to generic DMA API 2018-10-17 21:58:51 -04:00
BusLogic.h
bvme6000_scsi.c
ch.c scsi: core: check for equality of result byte values 2018-06-26 12:27:06 -04:00
constants.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
dc395x.c scsi: dc395x: use generic DMA API 2018-10-17 21:34:20 -04:00
dc395x.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
dmx3191d.c scsi: NCR5380: Move bus reset to host reset 2017-08-25 17:21:11 -04:00
dpt_i2o.c scsi: dpt_i2o: use dma_set_mask 2018-11-15 14:27:07 -05:00
dpti.h scsi: dpt_i2o: stop using scsi_unregister 2018-03-15 00:25:37 -04:00
esp_scsi.c scsi: esp_scsi: Optimize PIO loops 2018-10-17 21:38:29 -04:00
esp_scsi.h scsi: esp_scsi: De-duplicate PIO routines 2018-10-17 21:38:20 -04:00
FlashPoint.c scsi: FlashPoint: Remove unnecessary parentheses 2018-09-25 20:45:53 -04:00
g_NCR5380.c scsi: NCR5380: Move bus reset to host reset 2017-08-25 17:21:11 -04:00
gdth_ioctl.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
gdth_proc.c scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
gdth_proc.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
gdth.c scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
gdth.h scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
gvp11.c scsi: drop bus reset for wd33c93-compatible boards 2017-08-25 17:21:10 -04:00
gvp11.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
hosts.c Revert "scsi: core: avoid host-wide host_busy counter for scsi_mq" 2018-08-27 13:17:00 -04:00
hpsa_cmd.h scsi: hpsa: update discovery polling 2017-10-25 04:55:18 -04:00
hpsa.c SCSI misc on 20181024 2018-10-25 07:40:30 -07:00
hpsa.h scsi: hpsa: correct enclosure sas address 2018-07-10 22:25:03 -04:00
hptiop.c scsi: hptiop: use dma_set_mask 2018-11-15 14:27:08 -05:00
hptiop.h
imm.c scsi: don't add scsi command result bytes 2018-06-26 12:27:07 -04:00
imm.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
initio.c scsi: initio: use dma_set_mask 2018-11-15 14:27:08 -05:00
initio.h
ipr.c scsi: ipr: System hung while dlpar adding primary ipr adapter back 2018-09-21 12:35:39 -04:00
ipr.h scsi: ipr: System hung while dlpar adding primary ipr adapter back 2018-09-21 12:35:39 -04:00
ips.c scsi: ips: properly handle 64-bit DMA 2018-11-06 21:31:28 -05:00
ips.h scsi: ips: properly handle 64-bit DMA 2018-11-06 21:31:28 -05:00
iscsi_boot_sysfs.c
iscsi_tcp.c scsi: iscsi_tcp: Explicitly cast param in iscsi_sw_tcp_host_get_param 2018-10-16 21:50:06 -04:00
iscsi_tcp.h
jazz_esp.c scsi: esp_scsi: move dma mapping into the core code 2018-10-15 23:00:38 -04:00
Kconfig powerpc: remove CONFIG_MCA leftovers 2018-11-02 00:15:24 +09:00
lasi700.c
libiscsi_tcp.c scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
libiscsi.c SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
mac53c94.c treewide: kmalloc() -> kmalloc_array() 2018-06-12 16:19:22 -07:00
mac53c94.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
mac_esp.c scsi: esp_scsi: De-duplicate PIO routines 2018-10-17 21:38:20 -04:00
mac_scsi.c scsi: NCR5380: Move bus reset to host reset 2017-08-25 17:21:11 -04:00
Makefile scsi: myrs: Add Mylex RAID controller (SCSI interface) 2018-10-17 21:07:54 -04:00
megaraid.c scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
megaraid.h scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
mesh.c scsi: mesh: switch to generic DMA API 2018-10-17 21:58:53 -04:00
mesh.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
mvme16x_scsi.c
mvme147.c scsi: mvme147: stop using scsi_module.c 2018-03-19 22:54:47 -04:00
mvme147.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
mvumi.c scsi: mvumi: use dma_set_mask 2018-11-15 14:27:08 -05:00
mvumi.h
myrb.c scsi: myrb: Add Mylex RAID controller (block interface) 2018-10-17 21:06:49 -04:00
myrb.h scsi: myrb: Add Mylex RAID controller (block interface) 2018-10-17 21:06:49 -04:00
myrs.c scsi: myrs: Fix the processor absent message in processor_show() 2018-10-19 18:31:37 -04:00
myrs.h scsi: myrs: Add Mylex RAID controller (SCSI interface) 2018-10-17 21:07:54 -04:00
ncr53c8xx.c scsi: ncr53c8xx: remove ScsiResult macro 2018-07-10 22:42:47 -04:00
ncr53c8xx.h
NCR5380.c scsi: NCR5380: Check for bus reset 2018-09-28 02:22:43 -04:00
NCR5380.h scsi: NCR5380: Have NCR5380_select() return a bool 2018-09-28 02:17:51 -04:00
nsp32_debug.c scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
nsp32_io.h
nsp32.c scsi: nsp32: switch to generic DMA API 2018-10-17 21:58:52 -04:00
nsp32.h
osst_detect.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
osst_options.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
osst.c treewide: Use array_size() in vmalloc() 2018-06-12 16:19:22 -07:00
osst.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
pmcraid.c scsi: pmcraid: use generic DMA API 2018-11-06 21:31:29 -05:00
pmcraid.h scsi: pmcraid: Use sgl_alloc_order() and sgl_free_order() 2018-02-13 21:49:15 -05:00
ppa.c scsi: ppa: mark expected switch fall-throughs 2017-12-04 20:32:52 -05:00
ppa.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
ps3rom.c
qla1280.c scsi: qla1280: properly handle 64-bit DMA 2018-11-06 21:31:28 -05:00
qla1280.h timer: Remove init_timer_on_stack() in favor of timer_setup_on_stack() 2017-10-05 15:01:17 +02:00
qlogicfas408.c scsi: qlogicfas: move bus_reset to host_reset 2017-08-25 17:21:11 -04:00
qlogicfas408.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
qlogicfas.c scsi: qlogicfas: move bus_reset to host_reset 2017-08-25 17:21:11 -04:00
qlogicpti.c scsi: read host_busy via scsi_host_busy() 2018-06-26 12:53:26 -04:00
qlogicpti.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
raid_class.c scsi: raid_attrs: fix unused variable warning 2018-08-30 07:21:04 -04:00
script_asm.pl
scsi_common.c scsi: core: doc. fixes to scsi_common.c 2017-12-11 21:39:39 -05:00
scsi_debug.c SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
scsi_debugfs.c scsi: devinfo: use const_ilog2 for array indices 2018-04-20 19:14:28 -04:00
scsi_debugfs.h
scsi_devinfo.c scsi: devinfo: BLIST_RETRY_ASC_C1 for Fujitsu ETERNUS 2018-04-20 19:14:36 -04:00
scsi_dh.c scsi: scsi_dh: replace too broad "TP9" string with the exact models 2018-04-18 19:34:08 -04:00
scsi_error.c scsi: core: Remove scsi_block_when_processing_errors: message 2018-10-17 20:54:20 -04:00
scsi_ioctl.c scsi: core: check for equality of result byte values 2018-06-26 12:27:06 -04:00
scsi_lib_dma.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
scsi_lib.c SCSI misc on 20181024 2018-10-25 07:40:30 -07:00
scsi_logging.c
scsi_logging.h SCSI misc on 20171114 2017-11-14 16:23:44 -08:00
scsi_netlink.c
scsi_pm.c block: Move power management code into a new source file 2018-09-26 15:11:28 -06:00
scsi_priv.h scsi: dh: Remove scsi_dh_remove_device() 2017-12-07 21:13:45 -05:00
scsi_proc.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
scsi_sas_internal.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
scsi_scan.c scsi: core: check for equality of result byte values 2018-06-26 12:27:06 -04:00
scsi_sysctl.c
scsi_sysfs.c scsi: core: Avoid that SCSI device removal through sysfs triggers a deadlock 2018-08-02 15:53:36 -04:00
scsi_trace.c
scsi_transport_api.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
scsi_transport_fc.c SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
scsi_transport_iscsi.c block: remove parent device reference from struct bsg_class_device 2018-05-29 13:00:25 -06:00
scsi_transport_sas.c scsi: libsas: delete dead code in scsi_transport_sas.c 2018-09-25 21:20:23 -04:00
scsi_transport_spi.c scsi: core: check for equality of result byte values 2018-06-26 12:27:06 -04:00
scsi_transport_srp.c for-4.18/block-20180603 2018-06-04 07:58:06 -07:00
scsi.c scsi: read host_busy via scsi_host_busy() 2018-06-26 12:53:26 -04:00
scsi.h scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
scsicam.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
sd_dif.c block: move dif_prepare/dif_complete functions to block layer 2018-07-30 08:27:02 -06:00
sd_zbc.c block: Introduce blk_revalidate_disk_zones() 2018-10-25 11:17:40 -06:00
sd.c block: Introduce blk_revalidate_disk_zones() 2018-10-25 11:17:40 -06:00
sd.h block: Introduce blk_revalidate_disk_zones() 2018-10-25 11:17:40 -06:00
sense_codes.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
ses.c treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
sg.c scsi: sg: remove bad blk_end_request_all() call 2018-10-16 17:49:57 -04:00
sgiwd93.c scsi: drop bus reset for wd33c93-compatible boards 2017-08-25 17:21:10 -04:00
sim710.c
sni_53c710.c
sr_ioctl.c block: Switch struct packet_command to use struct scsi_sense_hdr 2018-08-02 15:22:13 -06:00
sr_vendor.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
sr.c block: genhd: add 'groups' argument to device_add_disk 2018-09-28 08:30:28 -06:00
sr.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
st_options.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
st.c scsi: st: remove redundant pointer STbuffer 2018-08-08 21:15:54 -04:00
st.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
stex.c scsi: stex: use dma_set_mask_and_coherent 2018-11-15 14:27:08 -05:00
storvsc_drv.c use the new async probing feature for the hyperv drivers 2018-07-03 13:02:28 +02:00
sun3_scsi_vme.c
sun3_scsi.c scsi: NCR5380: Move bus reset to host reset 2017-08-25 17:21:11 -04:00
sun3x_esp.c scsi: esp_scsi: move dma mapping into the core code 2018-10-15 23:00:38 -04:00
sun_esp.c scsi: esp_scsi: move dma mapping into the core code 2018-10-15 23:00:38 -04:00
virtio_scsi.c scsi: virtio_scsi: fix pi_bytes{out,in} on 4 KiB block size devices 2018-07-26 15:49:43 -06:00
vmw_pvscsi.c scsi: vmw_pscsi: switch to generic DMA API 2018-10-17 21:58:53 -04:00
vmw_pvscsi.h
wd33c93.c scsi: drop bus reset for wd33c93-compatible boards 2017-08-25 17:21:10 -04:00
wd33c93.h
wd719x.c scsi: wd719x: always use generic DMA API 2018-11-15 14:27:08 -05:00
wd719x.h scsi: wd719x: use per-command private data 2018-11-15 14:27:08 -05:00
xen-scsifront.c scsi: xen-scsifront: add error handling for xenbus_printf 2018-06-19 14:54:41 +02:00
zalon.c
zorro7xx.c
zorro_esp.c scsi: esp_scsi: De-duplicate PIO routines 2018-10-17 21:38:20 -04:00