mirror of
https://github.com/torvalds/linux.git
synced 2024-11-24 21:21:41 +00:00
ebb82e3c79
On many laptops setting a different LPM policy then unknown / max_performance can lead to power-savings of 1.0 - 1.5 Watts (when idle). Modern ultrabooks idle around 6W (at 50% screen brightness), 1.0 - 1.5W is a significant chunk of this. There are some performance / latency costs to enabling LPM by default, so it is desirable to make it possible to set a different LPM policy for mobile / laptop variants of chipsets / "South Bridges" vs their desktop / server counterparts. Also enabling LPM by default is not entirely without risk of regressions. At least min_power is known to cause issues with some disks, including some reports of data corruption. This commits adds a new ahci.mobile_lpm_policy kernel cmdline option, which defaults to a new SATA_MOBILE_LPM_POLICY Kconfig option so that Linux distributions can choose to set a LPM policy for mobile chipsets by default. The reason to have both a kernel cmdline option and a Kconfig default value for it, is to allow easy overriding of the default to allow trouble-shooting without needing to rebuild the kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
1130 lines
27 KiB
Plaintext
1130 lines
27 KiB
Plaintext
# SPDX-License-Identifier: GPL-2.0
|
|
#
|
|
# SATA/PATA driver configuration
|
|
#
|
|
|
|
config HAVE_PATA_PLATFORM
|
|
bool
|
|
help
|
|
This is an internal configuration node for any machine that
|
|
uses pata-platform driver to enable the relevant driver in the
|
|
configuration structure without having to submit endless patches
|
|
to update the PATA_PLATFORM entry.
|
|
|
|
menuconfig ATA
|
|
tristate "Serial ATA and Parallel ATA drivers (libata)"
|
|
depends on HAS_IOMEM
|
|
depends on BLOCK
|
|
select SCSI
|
|
select GLOB
|
|
---help---
|
|
If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
|
|
any other ATA device under Linux, say Y and make sure that you know
|
|
the name of your ATA host adapter (the card inside your computer
|
|
that "speaks" the ATA protocol, also called ATA controller),
|
|
because you will be asked for it.
|
|
|
|
NOTE: ATA enables basic SCSI support; *however*,
|
|
'SCSI disk support', 'SCSI tape support', or
|
|
'SCSI CDROM support' may also be needed,
|
|
depending on your hardware configuration.
|
|
|
|
if ATA
|
|
|
|
config ATA_NONSTANDARD
|
|
bool
|
|
default n
|
|
|
|
config ATA_VERBOSE_ERROR
|
|
bool "Verbose ATA error reporting"
|
|
default y
|
|
help
|
|
This option adds parsing of ATA command descriptions and error bits
|
|
in libata kernel output, making it easier to interpret.
|
|
This option will enlarge the kernel by approx. 6KB. Disable it only
|
|
if kernel size is more important than ease of debugging.
|
|
|
|
If unsure, say Y.
|
|
|
|
config ATA_ACPI
|
|
bool "ATA ACPI Support"
|
|
depends on ACPI
|
|
default y
|
|
help
|
|
This option adds support for ATA-related ACPI objects.
|
|
These ACPI objects add the ability to retrieve taskfiles
|
|
from the ACPI BIOS and write them to the disk controller.
|
|
These objects may be related to performance, security,
|
|
power management, or other areas.
|
|
You can disable this at kernel boot time by using the
|
|
option libata.noacpi=1
|
|
|
|
config SATA_ZPODD
|
|
bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
|
|
depends on ATA_ACPI && PM
|
|
default n
|
|
help
|
|
This option adds support for SATA Zero Power Optical Disc
|
|
Drive (ZPODD). It requires both the ODD and the platform
|
|
support, and if enabled, will automatically power on/off the
|
|
ODD when certain condition is satisfied. This does not impact
|
|
end user's experience of the ODD, only power is saved when
|
|
the ODD is not in use (i.e. no disc inside).
|
|
|
|
If unsure, say N.
|
|
|
|
config SATA_PMP
|
|
bool "SATA Port Multiplier support"
|
|
default y
|
|
help
|
|
This option adds support for SATA Port Multipliers
|
|
(the SATA version of an ethernet hub, or SAS expander).
|
|
|
|
if HAS_DMA
|
|
|
|
comment "Controllers with non-SFF native interface"
|
|
|
|
config SATA_AHCI
|
|
tristate "AHCI SATA support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for AHCI Serial ATA.
|
|
|
|
If unsure, say N.
|
|
|
|
config SATA_MOBILE_LPM_POLICY
|
|
int "Default SATA Link Power Management policy for mobile chipsets"
|
|
range 0 4
|
|
default 0
|
|
depends on SATA_AHCI
|
|
help
|
|
Select the Default SATA Link Power Management (LPM) policy to use
|
|
for mobile / laptop variants of chipsets / "South Bridges".
|
|
|
|
The value set has the following meanings:
|
|
0 => Keep firmware settings
|
|
1 => Maximum performance
|
|
2 => Medium power
|
|
3 => Medium power with Device Initiated PM enabled
|
|
4 => Minimum power
|
|
|
|
Note "Minimum power" is known to cause issues, including disk
|
|
corruption, with some disks and should not be used.
|
|
|
|
config SATA_AHCI_PLATFORM
|
|
tristate "Platform AHCI SATA support"
|
|
help
|
|
This option enables support for Platform AHCI Serial ATA
|
|
controllers.
|
|
|
|
If unsure, say N.
|
|
|
|
config AHCI_BRCM
|
|
tristate "Broadcom AHCI SATA support"
|
|
depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP
|
|
help
|
|
This option enables support for the AHCI SATA3 controller found on
|
|
Broadcom SoC's.
|
|
|
|
If unsure, say N.
|
|
|
|
config AHCI_DA850
|
|
tristate "DaVinci DA850 AHCI SATA support"
|
|
depends on ARCH_DAVINCI_DA850
|
|
help
|
|
This option enables support for the DaVinci DA850 SoC's
|
|
onboard AHCI SATA.
|
|
|
|
If unsure, say N.
|
|
|
|
config AHCI_DM816
|
|
tristate "DaVinci DM816 AHCI SATA support"
|
|
depends on ARCH_OMAP2PLUS
|
|
help
|
|
This option enables support for the DaVinci DM816 SoC's
|
|
onboard AHCI SATA controller.
|
|
|
|
If unsure, say N.
|
|
|
|
config AHCI_ST
|
|
tristate "ST AHCI SATA support"
|
|
depends on ARCH_STI
|
|
help
|
|
This option enables support for ST AHCI SATA controller.
|
|
|
|
If unsure, say N.
|
|
|
|
config AHCI_IMX
|
|
tristate "Freescale i.MX AHCI SATA support"
|
|
depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
|
|
depends on (HWMON && (THERMAL || !THERMAL_OF)) || !HWMON
|
|
help
|
|
This option enables support for the Freescale i.MX SoC's
|
|
onboard AHCI SATA.
|
|
|
|
If unsure, say N.
|
|
|
|
config AHCI_CEVA
|
|
tristate "CEVA AHCI SATA support"
|
|
depends on OF
|
|
help
|
|
This option enables support for the CEVA AHCI SATA.
|
|
It can be found on the Xilinx Zynq UltraScale+ MPSoC.
|
|
|
|
If unsure, say N.
|
|
|
|
config AHCI_MTK
|
|
tristate "MediaTek AHCI SATA support"
|
|
depends on ARCH_MEDIATEK
|
|
select MFD_SYSCON
|
|
help
|
|
This option enables support for the MediaTek SoC's
|
|
onboard AHCI SATA controller.
|
|
|
|
If unsure, say N.
|
|
|
|
config AHCI_MVEBU
|
|
tristate "Marvell EBU AHCI SATA support"
|
|
depends on ARCH_MVEBU
|
|
help
|
|
This option enables support for the Marvebu EBU SoC's
|
|
onboard AHCI SATA.
|
|
|
|
If unsure, say N.
|
|
|
|
config AHCI_OCTEON
|
|
tristate "Cavium Octeon Soc Serial ATA"
|
|
depends on SATA_AHCI_PLATFORM && CAVIUM_OCTEON_SOC
|
|
default y
|
|
help
|
|
This option enables support for Cavium Octeon SoC Serial ATA.
|
|
|
|
If unsure, say N.
|
|
|
|
config AHCI_SUNXI
|
|
tristate "Allwinner sunxi AHCI SATA support"
|
|
depends on ARCH_SUNXI
|
|
help
|
|
This option enables support for the Allwinner sunxi SoC's
|
|
onboard AHCI SATA.
|
|
|
|
If unsure, say N.
|
|
|
|
config AHCI_TEGRA
|
|
tristate "NVIDIA Tegra124 AHCI SATA support"
|
|
depends on ARCH_TEGRA
|
|
help
|
|
This option enables support for the NVIDIA Tegra124 SoC's
|
|
onboard AHCI SATA.
|
|
|
|
If unsure, say N.
|
|
|
|
config AHCI_XGENE
|
|
tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
|
|
depends on PHY_XGENE
|
|
help
|
|
This option enables support for APM X-Gene SoC SATA host controller.
|
|
|
|
config AHCI_QORIQ
|
|
tristate "Freescale QorIQ AHCI SATA support"
|
|
depends on OF
|
|
help
|
|
This option enables support for the Freescale QorIQ AHCI SoC's
|
|
onboard AHCI SATA.
|
|
|
|
If unsure, say N.
|
|
|
|
config SATA_FSL
|
|
tristate "Freescale 3.0Gbps SATA support"
|
|
depends on FSL_SOC
|
|
help
|
|
This option enables support for Freescale 3.0Gbps SATA controller.
|
|
It can be found on MPC837x and MPC8315.
|
|
|
|
If unsure, say N.
|
|
|
|
config SATA_GEMINI
|
|
tristate "Gemini SATA bridge support"
|
|
depends on ARCH_GEMINI || COMPILE_TEST
|
|
default ARCH_GEMINI
|
|
help
|
|
This enabled support for the FTIDE010 to SATA bridge
|
|
found in Cortina Systems Gemini platform.
|
|
|
|
If unsure, say N.
|
|
|
|
config SATA_AHCI_SEATTLE
|
|
tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support"
|
|
depends on ARCH_SEATTLE
|
|
help
|
|
This option enables support for AMD Seattle SATA host controller.
|
|
|
|
If unsure, say N
|
|
|
|
config SATA_INIC162X
|
|
tristate "Initio 162x SATA support (Very Experimental)"
|
|
depends on PCI
|
|
help
|
|
This option enables support for Initio 162x Serial ATA.
|
|
|
|
config SATA_ACARD_AHCI
|
|
tristate "ACard AHCI variant (ATP 8620)"
|
|
depends on PCI
|
|
help
|
|
This option enables support for Acard.
|
|
|
|
If unsure, say N.
|
|
|
|
config SATA_SIL24
|
|
tristate "Silicon Image 3124/3132 SATA support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for Silicon Image 3124/3132 Serial ATA.
|
|
|
|
If unsure, say N.
|
|
|
|
endif # HAS_DMA
|
|
|
|
config ATA_SFF
|
|
bool "ATA SFF support (for legacy IDE and PATA)"
|
|
default y
|
|
help
|
|
This option adds support for ATA controllers with SFF
|
|
compliant or similar programming interface.
|
|
|
|
SFF is the legacy IDE interface that has been around since
|
|
the dawn of time. Almost all PATA controllers have an
|
|
SFF interface. Many SATA controllers have an SFF interface
|
|
when configured into a legacy compatibility mode.
|
|
|
|
For users with exclusively modern controllers like AHCI,
|
|
Silicon Image 3124, or Marvell 6440, you may choose to
|
|
disable this unneeded SFF support.
|
|
|
|
If unsure, say Y.
|
|
|
|
if ATA_SFF
|
|
|
|
comment "SFF controllers with custom DMA interface"
|
|
|
|
config PDC_ADMA
|
|
tristate "Pacific Digital ADMA support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for Pacific Digital ADMA controllers
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_OCTEON_CF
|
|
tristate "OCTEON Boot Bus Compact Flash support"
|
|
depends on CAVIUM_OCTEON_SOC
|
|
help
|
|
This option enables a polled compact flash driver for use with
|
|
compact flash cards attached to the OCTEON boot bus.
|
|
|
|
If unsure, say N.
|
|
|
|
config SATA_QSTOR
|
|
tristate "Pacific Digital SATA QStor support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for Pacific Digital Serial ATA QStor.
|
|
|
|
If unsure, say N.
|
|
|
|
config SATA_SX4
|
|
tristate "Promise SATA SX4 support (Experimental)"
|
|
depends on PCI
|
|
help
|
|
This option enables support for Promise Serial ATA SX4.
|
|
|
|
If unsure, say N.
|
|
|
|
config ATA_BMDMA
|
|
bool "ATA BMDMA support"
|
|
depends on HAS_DMA
|
|
default y
|
|
help
|
|
This option adds support for SFF ATA controllers with BMDMA
|
|
capability. BMDMA stands for bus-master DMA and is the
|
|
de facto DMA interface for SFF controllers.
|
|
|
|
If unsure, say Y.
|
|
|
|
if ATA_BMDMA
|
|
|
|
comment "SATA SFF controllers with BMDMA"
|
|
|
|
config ATA_PIIX
|
|
tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for ICH5/6/7/8 Serial ATA
|
|
and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
|
|
host controllers.
|
|
|
|
If unsure, say N.
|
|
|
|
config SATA_DWC
|
|
tristate "DesignWare Cores SATA support"
|
|
depends on DMADEVICES
|
|
select GENERIC_PHY
|
|
help
|
|
This option enables support for the on-chip SATA controller of the
|
|
AppliedMicro processor 460EX.
|
|
|
|
If unsure, say N.
|
|
|
|
config SATA_DWC_OLD_DMA
|
|
bool "Support old device trees"
|
|
depends on SATA_DWC
|
|
select DW_DMAC_CORE
|
|
default y if 460EX
|
|
help
|
|
This option enables support for old device trees without the
|
|
"dmas" property.
|
|
|
|
config SATA_DWC_DEBUG
|
|
bool "Debugging driver version"
|
|
depends on SATA_DWC
|
|
help
|
|
This option enables debugging output in the driver.
|
|
|
|
config SATA_DWC_VDEBUG
|
|
bool "Verbose debug output"
|
|
depends on SATA_DWC_DEBUG
|
|
help
|
|
This option enables the taskfile dumping and NCQ debugging.
|
|
|
|
config SATA_HIGHBANK
|
|
tristate "Calxeda Highbank SATA support"
|
|
depends on HAS_DMA
|
|
depends on ARCH_HIGHBANK || COMPILE_TEST
|
|
help
|
|
This option enables support for the Calxeda Highbank SoC's
|
|
onboard SATA.
|
|
|
|
If unsure, say N.
|
|
|
|
config SATA_MV
|
|
tristate "Marvell SATA support"
|
|
depends on HAS_DMA
|
|
depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
|
|
ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
|
|
select GENERIC_PHY
|
|
help
|
|
This option enables support for the Marvell Serial ATA family.
|
|
Currently supports 88SX[56]0[48][01] PCI(-X) chips,
|
|
as well as the newer [67]042 PCI-X/PCIe and SOC devices.
|
|
|
|
If unsure, say N.
|
|
|
|
config SATA_NV
|
|
tristate "NVIDIA SATA support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for NVIDIA Serial ATA.
|
|
|
|
If unsure, say N.
|
|
|
|
config SATA_PROMISE
|
|
tristate "Promise SATA TX2/TX4 support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for Promise Serial ATA TX2/TX4.
|
|
|
|
If unsure, say N.
|
|
|
|
config SATA_RCAR
|
|
tristate "Renesas R-Car SATA support"
|
|
depends on ARCH_RENESAS || COMPILE_TEST
|
|
help
|
|
This option enables support for Renesas R-Car Serial ATA.
|
|
|
|
If unsure, say N.
|
|
|
|
config SATA_SIL
|
|
tristate "Silicon Image SATA support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for Silicon Image Serial ATA.
|
|
|
|
If unsure, say N.
|
|
|
|
config SATA_SIS
|
|
tristate "SiS 964/965/966/180 SATA support"
|
|
depends on PCI
|
|
select PATA_SIS
|
|
help
|
|
This option enables support for SiS Serial ATA on
|
|
SiS 964/965/966/180 and Parallel ATA on SiS 180.
|
|
The PATA support for SiS 180 requires additionally to
|
|
enable the PATA_SIS driver in the config.
|
|
If unsure, say N.
|
|
|
|
config SATA_SVW
|
|
tristate "ServerWorks Frodo / Apple K2 SATA support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for Broadcom/Serverworks/Apple K2
|
|
SATA support.
|
|
|
|
If unsure, say N.
|
|
|
|
config SATA_ULI
|
|
tristate "ULi Electronics SATA support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for ULi Electronics SATA.
|
|
|
|
If unsure, say N.
|
|
|
|
config SATA_VIA
|
|
tristate "VIA SATA support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for VIA Serial ATA.
|
|
|
|
If unsure, say N.
|
|
|
|
config SATA_VITESSE
|
|
tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
|
|
|
|
If unsure, say N.
|
|
|
|
comment "PATA SFF controllers with BMDMA"
|
|
|
|
config PATA_ALI
|
|
tristate "ALi PATA support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for the ALi ATA interfaces
|
|
found on the many ALi chipsets.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_AMD
|
|
tristate "AMD/NVidia PATA support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for the AMD and NVidia PATA
|
|
interfaces found on the chipsets for Athlon/Athlon64.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_ARASAN_CF
|
|
tristate "ARASAN CompactFlash PATA Controller Support"
|
|
depends on ARCH_SPEAR13XX || COMPILE_TEST
|
|
depends on DMADEVICES
|
|
select DMA_ENGINE
|
|
help
|
|
Say Y here to support the ARASAN CompactFlash PATA controller
|
|
|
|
config PATA_ARTOP
|
|
tristate "ARTOP 6210/6260 PATA support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for ARTOP PATA controllers.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_ATIIXP
|
|
tristate "ATI PATA support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for the ATI ATA interfaces
|
|
found on the many ATI chipsets.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_ATP867X
|
|
tristate "ARTOP/Acard ATP867X PATA support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for ARTOP/Acard ATP867X PATA
|
|
controllers.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_BF54X
|
|
tristate "Blackfin 54x ATAPI support"
|
|
depends on BF542 || BF548 || BF549
|
|
help
|
|
This option enables support for the built-in ATAPI controller on
|
|
Blackfin 54x family chips.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_BK3710
|
|
tristate "Palmchip BK3710 PATA support"
|
|
depends on ARCH_DAVINCI
|
|
help
|
|
This option enables support for the integrated IDE controller on
|
|
the TI DaVinci SoC.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_CMD64X
|
|
tristate "CMD64x PATA support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for the CMD64x series chips
|
|
except for the CMD640.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_CS5520
|
|
tristate "CS5510/5520 PATA support"
|
|
depends on PCI && (X86_32 || COMPILE_TEST)
|
|
help
|
|
This option enables support for the Cyrix 5510/5520
|
|
companion chip used with the MediaGX/Geode processor family.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_CS5530
|
|
tristate "CS5530 PATA support"
|
|
depends on PCI && (X86_32 || COMPILE_TEST)
|
|
help
|
|
This option enables support for the Cyrix/NatSemi/AMD CS5530
|
|
companion chip used with the MediaGX/Geode processor family.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_CS5535
|
|
tristate "CS5535 PATA support (Experimental)"
|
|
depends on PCI && X86_32
|
|
help
|
|
This option enables support for the NatSemi/AMD CS5535
|
|
companion chip used with the Geode processor family.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_CS5536
|
|
tristate "CS5536 PATA support"
|
|
depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
|
|
help
|
|
This option enables support for the AMD CS5536
|
|
companion chip used with the Geode LX processor family.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_CYPRESS
|
|
tristate "Cypress CY82C693 PATA support (Very Experimental)"
|
|
depends on PCI
|
|
help
|
|
This option enables support for the Cypress/Contaq CY82C693
|
|
chipset found in some Alpha systems
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_EFAR
|
|
tristate "EFAR SLC90E66 support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for the EFAR SLC90E66
|
|
IDE controller found on some older machines.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_EP93XX
|
|
tristate "Cirrus Logic EP93xx PATA support"
|
|
depends on ARCH_EP93XX
|
|
help
|
|
This option enables support for the PATA controller in
|
|
the Cirrus Logic EP9312 and EP9315 ARM CPU.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_FTIDE010
|
|
tristate "Faraday Technology FTIDE010 PATA support"
|
|
depends on OF
|
|
depends on ARM
|
|
depends on SATA_GEMINI
|
|
help
|
|
This option enables support for the Faraday FTIDE010
|
|
PATA controller found in the Cortina Gemini SoCs.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_HPT366
|
|
tristate "HPT 366/368 PATA support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for the HPT 366 and 368
|
|
PATA controllers via the new ATA layer.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_HPT37X
|
|
tristate "HPT 370/370A/371/372/374/302 PATA support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for the majority of the later HPT
|
|
PATA controllers via the new ATA layer.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_HPT3X2N
|
|
tristate "HPT 371N/372N/302N PATA support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for the N variant HPT PATA
|
|
controllers via the new ATA layer.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_HPT3X3
|
|
tristate "HPT 343/363 PATA support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for the HPT 343/363
|
|
PATA controllers via the new ATA layer
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_HPT3X3_DMA
|
|
bool "HPT 343/363 DMA support"
|
|
depends on PATA_HPT3X3
|
|
help
|
|
This option enables DMA support for the HPT343/363
|
|
controllers. Enable with care as there are still some
|
|
problems with DMA on this chipset.
|
|
|
|
config PATA_ICSIDE
|
|
tristate "Acorn ICS PATA support"
|
|
depends on ARM && ARCH_ACORN
|
|
help
|
|
On Acorn systems, say Y here if you wish to use the ICS PATA
|
|
interface card. This is not required for ICS partition support.
|
|
If you are unsure, say N to this.
|
|
|
|
config PATA_IMX
|
|
tristate "PATA support for Freescale iMX"
|
|
depends on ARCH_MXC
|
|
help
|
|
This option enables support for the PATA host available on Freescale
|
|
iMX SoCs.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_IT8213
|
|
tristate "IT8213 PATA support (Experimental)"
|
|
depends on PCI
|
|
help
|
|
This option enables support for the ITE 821 PATA
|
|
controllers via the new ATA layer.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_IT821X
|
|
tristate "IT8211/2 PATA support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for the ITE 8211 and 8212
|
|
PATA controllers via the new ATA layer, including RAID
|
|
mode.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_JMICRON
|
|
tristate "JMicron PATA support"
|
|
depends on PCI
|
|
help
|
|
Enable support for the JMicron IDE controller, via the new
|
|
ATA layer.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_MACIO
|
|
tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
|
|
depends on PPC_PMAC
|
|
help
|
|
Most IDE capable PowerMacs have IDE busses driven by a variant
|
|
of this controller which is part of the Apple chipset used on
|
|
most PowerMac models. Some models have multiple busses using
|
|
different chipsets, though generally, MacIO is one of them.
|
|
|
|
config PATA_MARVELL
|
|
tristate "Marvell PATA support via legacy mode"
|
|
depends on PCI
|
|
help
|
|
This option enables limited support for the Marvell 88SE61xx ATA
|
|
controllers. If you wish to use only the SATA ports then select
|
|
the AHCI driver alone. If you wish to the use the PATA port or
|
|
both SATA and PATA include this driver.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_MPC52xx
|
|
tristate "Freescale MPC52xx SoC internal IDE"
|
|
depends on PPC_MPC52xx && PPC_BESTCOMM
|
|
select PPC_BESTCOMM_ATA
|
|
help
|
|
This option enables support for integrated IDE controller
|
|
of the Freescale MPC52xx SoC.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_NETCELL
|
|
tristate "NETCELL Revolution RAID support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for the Netcell Revolution RAID
|
|
PATA controller.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_NINJA32
|
|
tristate "Ninja32/Delkin Cardbus ATA support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for the Ninja32, Delkin and
|
|
possibly other brands of Cardbus ATA adapter
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_NS87415
|
|
tristate "Nat Semi NS87415 PATA support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for the National Semiconductor
|
|
NS87415 PCI-IDE controller.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_OLDPIIX
|
|
tristate "Intel PATA old PIIX support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for early PIIX PATA support.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_OPTIDMA
|
|
tristate "OPTI FireStar PATA support (Very Experimental)"
|
|
depends on PCI
|
|
help
|
|
This option enables DMA/PIO support for the later OPTi
|
|
controllers found on some old motherboards and in some
|
|
laptops.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_PDC2027X
|
|
tristate "Promise PATA 2027x support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_PDC_OLD
|
|
tristate "Older Promise PATA controller support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for the Promise 20246, 20262, 20263,
|
|
20265 and 20267 adapters.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_RADISYS
|
|
tristate "RADISYS 82600 PATA support (Experimental)"
|
|
depends on PCI
|
|
help
|
|
This option enables support for the RADISYS 82600
|
|
PATA controllers via the new ATA layer
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_RDC
|
|
tristate "RDC PATA support"
|
|
depends on PCI
|
|
help
|
|
This option enables basic support for the later RDC PATA controllers
|
|
controllers via the new ATA layer. For the RDC 1010, you need to
|
|
enable the IT821X driver instead.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_SC1200
|
|
tristate "SC1200 PATA support"
|
|
depends on PCI && (X86_32 || COMPILE_TEST)
|
|
help
|
|
This option enables support for the NatSemi/AMD SC1200 SoC
|
|
companion chip used with the Geode processor family.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_SCH
|
|
tristate "Intel SCH PATA support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for Intel SCH PATA on the Intel
|
|
SCH (US15W, US15L, UL11L) series host controllers.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_SERVERWORKS
|
|
tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for the Serverworks OSB4/CSB5/CSB6 and
|
|
HT1000 PATA controllers, via the new ATA layer.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_SIL680
|
|
tristate "CMD / Silicon Image 680 PATA support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for CMD / Silicon Image 680 PATA.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_SIS
|
|
tristate "SiS PATA support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for SiS PATA controllers
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_TOSHIBA
|
|
tristate "Toshiba Piccolo support (Experimental)"
|
|
depends on PCI
|
|
help
|
|
Support for the Toshiba Piccolo controllers. Currently only the
|
|
primary channel is supported by this driver.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_TRIFLEX
|
|
tristate "Compaq Triflex PATA support"
|
|
depends on PCI
|
|
help
|
|
Enable support for the Compaq 'Triflex' IDE controller as found
|
|
on many Compaq Pentium-Pro systems, via the new ATA layer.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_VIA
|
|
tristate "VIA PATA support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for the VIA PATA interfaces
|
|
found on the many VIA chipsets.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_PXA
|
|
tristate "PXA DMA-capable PATA support"
|
|
depends on ARCH_PXA
|
|
help
|
|
This option enables support for harddrive attached to PXA CPU's bus.
|
|
|
|
NOTE: This driver utilizes PXA DMA controller, in case your hardware
|
|
is not capable of doing MWDMA, use pata_platform instead.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_WINBOND
|
|
tristate "Winbond SL82C105 PATA support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for SL82C105 PATA devices found in the
|
|
Netwinder and some other systems
|
|
|
|
If unsure, say N.
|
|
|
|
endif # ATA_BMDMA
|
|
|
|
comment "PIO-only SFF controllers"
|
|
|
|
config PATA_AT32
|
|
tristate "Atmel AVR32 PATA support (Experimental)"
|
|
depends on AVR32 && PLATFORM_AT32AP
|
|
help
|
|
This option enables support for the IDE devices on the
|
|
Atmel AT32AP platform.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_CMD640_PCI
|
|
tristate "CMD640 PCI PATA support (Experimental)"
|
|
depends on PCI
|
|
help
|
|
This option enables support for the CMD640 PCI IDE
|
|
interface chip. Only the primary channel is currently
|
|
supported.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_FALCON
|
|
tristate "Atari Falcon PATA support"
|
|
depends on M68K && ATARI
|
|
help
|
|
This option enables support for the on-board IDE
|
|
interface on the Atari Falcon.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_ISAPNP
|
|
tristate "ISA Plug and Play PATA support"
|
|
depends on ISAPNP
|
|
help
|
|
This option enables support for ISA plug & play ATA
|
|
controllers such as those found on old soundcards.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_IXP4XX_CF
|
|
tristate "IXP4XX Compact Flash support"
|
|
depends on ARCH_IXP4XX
|
|
help
|
|
This option enables support for a Compact Flash connected on
|
|
the ixp4xx expansion bus. This driver had been written for
|
|
Loft/Avila boards in mind but can work with others.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_MPIIX
|
|
tristate "Intel PATA MPIIX support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for MPIIX PATA support.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_NS87410
|
|
tristate "Nat Semi NS87410 PATA support"
|
|
depends on PCI
|
|
help
|
|
This option enables support for the National Semiconductor
|
|
NS87410 PCI-IDE controller.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_OPTI
|
|
tristate "OPTI621/6215 PATA support (Very Experimental)"
|
|
depends on PCI
|
|
help
|
|
This option enables full PIO support for the early Opti ATA
|
|
controllers found on some old motherboards.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_PALMLD
|
|
tristate "Palm LifeDrive PATA support"
|
|
depends on MACH_PALMLD
|
|
help
|
|
This option enables support for Palm LifeDrive's internal ATA
|
|
port via the new ATA layer.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_PCMCIA
|
|
tristate "PCMCIA PATA support"
|
|
depends on PCMCIA
|
|
help
|
|
This option enables support for PCMCIA ATA interfaces, including
|
|
compact flash card adapters via the new ATA layer.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_PLATFORM
|
|
tristate "Generic platform device PATA support"
|
|
depends on EXPERT || PPC || HAVE_PATA_PLATFORM
|
|
help
|
|
This option enables support for generic directly connected ATA
|
|
devices commonly found on embedded systems.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_OF_PLATFORM
|
|
tristate "OpenFirmware platform device PATA support"
|
|
depends on PATA_PLATFORM && OF
|
|
help
|
|
This option enables support for generic directly connected ATA
|
|
devices commonly found on embedded systems with OpenFirmware
|
|
bindings.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_QDI
|
|
tristate "QDI VLB PATA support"
|
|
depends on ISA
|
|
select PATA_LEGACY
|
|
help
|
|
Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
|
|
|
|
config PATA_RB532
|
|
tristate "RouterBoard 532 PATA CompactFlash support"
|
|
depends on MIKROTIK_RB532
|
|
help
|
|
This option enables support for the RouterBoard 532
|
|
PATA CompactFlash controller.
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_RZ1000
|
|
tristate "PC Tech RZ1000 PATA support"
|
|
depends on PCI
|
|
help
|
|
This option enables basic support for the PC Tech RZ1000/1
|
|
PATA controllers via the new ATA layer
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_SAMSUNG_CF
|
|
tristate "Samsung SoC PATA support"
|
|
depends on SAMSUNG_DEV_IDE
|
|
help
|
|
This option enables basic support for Samsung's S3C/S5P board
|
|
PATA controllers via the new ATA layer
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_WINBOND_VLB
|
|
tristate "Winbond W83759A VLB PATA support (Experimental)"
|
|
depends on ISA
|
|
select PATA_LEGACY
|
|
help
|
|
Support for the Winbond W83759A controller on Vesa Local Bus
|
|
systems.
|
|
|
|
comment "Generic fallback / legacy drivers"
|
|
|
|
config PATA_ACPI
|
|
tristate "ACPI firmware driver for PATA"
|
|
depends on ATA_ACPI && ATA_BMDMA
|
|
help
|
|
This option enables an ACPI method driver which drives
|
|
motherboard PATA controller interfaces through the ACPI
|
|
firmware in the BIOS. This driver can sometimes handle
|
|
otherwise unsupported hardware.
|
|
|
|
config ATA_GENERIC
|
|
tristate "Generic ATA support"
|
|
depends on PCI && ATA_BMDMA
|
|
help
|
|
This option enables support for generic BIOS configured
|
|
ATA controllers via the new ATA layer
|
|
|
|
If unsure, say N.
|
|
|
|
config PATA_LEGACY
|
|
tristate "Legacy ISA PATA support (Experimental)"
|
|
depends on (ISA || PCI)
|
|
help
|
|
This option enables support for ISA/VLB/PCI bus legacy PATA
|
|
ports and allows them to be accessed via the new ATA layer.
|
|
|
|
If unsure, say N.
|
|
|
|
endif # ATA_SFF
|
|
endif # ATA
|