mirror of
https://github.com/torvalds/linux.git
synced 2024-12-18 00:53:40 +00:00
02eca17376
This adds a DT binding documentation for the MT2701 SoC from Mediatek. Signed-off-by: Erin Lo <erin.lo@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
37 lines
1.3 KiB
Plaintext
37 lines
1.3 KiB
Plaintext
* Mediatek Universal Asynchronous Receiver/Transmitter (UART)
|
|
|
|
Required properties:
|
|
- compatible should contain:
|
|
* "mediatek,mt2701-uart" for MT2701 compatible UARTS
|
|
* "mediatek,mt6580-uart" for MT6580 compatible UARTS
|
|
* "mediatek,mt6582-uart" for MT6582 compatible UARTS
|
|
* "mediatek,mt6589-uart" for MT6589 compatible UARTS
|
|
* "mediatek,mt6795-uart" for MT6795 compatible UARTS
|
|
* "mediatek,mt8127-uart" for MT8127 compatible UARTS
|
|
* "mediatek,mt8135-uart" for MT8135 compatible UARTS
|
|
* "mediatek,mt8173-uart" for MT8173 compatible UARTS
|
|
* "mediatek,mt6577-uart" for MT6577 and all of the above
|
|
|
|
- reg: The base address of the UART register bank.
|
|
|
|
- interrupts: A single interrupt specifier.
|
|
|
|
- clocks : Must contain an entry for each entry in clock-names.
|
|
See ../clocks/clock-bindings.txt for details.
|
|
- clock-names:
|
|
- "baud": The clock the baudrate is derived from
|
|
- "bus": The bus clock for register accesses (optional)
|
|
|
|
For compatibility with older device trees an unnamed clock is used for the
|
|
baud clock if the baudclk does not exist. Do not use this for new designs.
|
|
|
|
Example:
|
|
|
|
uart0: serial@11006000 {
|
|
compatible = "mediatek,mt6589-uart", "mediatek,mt6577-uart";
|
|
reg = <0x11006000 0x400>;
|
|
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&uart_clk>, <&bus_clk>;
|
|
clock-names = "baud", "bus";
|
|
};
|