mirror of
https://github.com/torvalds/linux.git
synced 2024-11-25 05:32:00 +00:00
964e186547
After commitb8a1a4cd5a
("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then03c835f498
("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de Link: https://lore.kernel.org/r/20230505220218.1239542-1-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org
497 lines
12 KiB
C
497 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) 2022 Richtek Technology Corp.
|
|
*
|
|
* Author: ChiYuan Huang <cy_huang@richtek.com>
|
|
*
|
|
*/
|
|
|
|
#include <linux/bits.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
|
|
#define RT6190_REG_VID 0x00
|
|
#define RT6190_REG_OUTV 0x01
|
|
#define RT6190_REG_OUTC 0x03
|
|
#define RT6190_REG_SET1 0x0D
|
|
#define RT6190_REG_SET2 0x0E
|
|
#define RT6190_REG_SET4 0x10
|
|
#define RT6190_REG_RATIO 0x11
|
|
#define RT6190_REG_OUT_VOLT_L 0x12
|
|
#define RT6190_REG_TEMP_H 0x1B
|
|
#define RT6190_REG_STAT1 0x1C
|
|
#define RT6190_REG_ALERT1 0x1E
|
|
#define RT6190_REG_ALERT2 0x1F
|
|
#define RT6190_REG_MASK2 0x21
|
|
#define RT6190_REG_OCPEN 0x28
|
|
#define RT6190_REG_SET5 0x29
|
|
#define RT6190_REG_VBUSC_ADC 0x32
|
|
#define RT6190_REG_BUSC_VOLT_L 0x33
|
|
#define RT6190_REG_BUSC_VOLT_H 0x34
|
|
#define RT6190_REG_STAT3 0x37
|
|
#define RT6190_REG_ALERT3 0x38
|
|
#define RT6190_REG_MASK3 0x39
|
|
|
|
#define RT6190_ENPWM_MASK BIT(7)
|
|
#define RT6190_ENDCHG_MASK BIT(4)
|
|
#define RT6190_ALERT_OTPEVT BIT(6)
|
|
#define RT6190_ALERT_UVPEVT BIT(5)
|
|
#define RT6190_ALERT_OVPEVT BIT(4)
|
|
#define RT6190_ENGCP_MASK BIT(1)
|
|
#define RT6190_FCCM_MASK BIT(7)
|
|
|
|
#define RICHTEK_VID 0x82
|
|
#define RT6190_OUT_MIN_UV 3000000
|
|
#define RT6190_OUT_MAX_UV 32000000
|
|
#define RT6190_OUT_STEP_UV 20000
|
|
#define RT6190_OUT_N_VOLT (RT6190_OUT_MAX_UV / RT6190_OUT_STEP_UV + 1)
|
|
#define RT6190_OUTV_MINSEL 150
|
|
#define RT6190_OUT_MIN_UA 306000
|
|
#define RT6190_OUT_MAX_UA 12114000
|
|
#define RT6190_OUT_STEP_UA 24000
|
|
#define RT6190_OUTC_MINSEL 19
|
|
#define RT6190_EN_TIME_US 500
|
|
|
|
#define RT6190_PSM_MODE 0
|
|
#define RT6190_FCCM_MODE 1
|
|
|
|
struct rt6190_data {
|
|
struct device *dev;
|
|
struct regmap *regmap;
|
|
struct gpio_desc *enable_gpio;
|
|
unsigned int cached_alert_evt;
|
|
};
|
|
|
|
static int rt6190_out_set_voltage_sel(struct regulator_dev *rdev,
|
|
unsigned int selector)
|
|
{
|
|
struct regmap *regmap = rdev_get_regmap(rdev);
|
|
__le16 le_sel = cpu_to_le16(selector);
|
|
|
|
return regmap_raw_write(regmap, RT6190_REG_OUTV, &le_sel,
|
|
sizeof(le_sel));
|
|
}
|
|
|
|
static int rt6190_out_get_voltage_sel(struct regulator_dev *rdev)
|
|
{
|
|
struct regmap *regmap = rdev_get_regmap(rdev);
|
|
__le16 le_sel;
|
|
int ret;
|
|
|
|
ret = regmap_raw_read(regmap, RT6190_REG_OUTV, &le_sel, sizeof(le_sel));
|
|
|
|
return ret ?: le16_to_cpu(le_sel);
|
|
}
|
|
|
|
static int rt6190_out_enable(struct regulator_dev *rdev)
|
|
{
|
|
struct rt6190_data *data = rdev_get_drvdata(rdev);
|
|
struct regmap *regmap = rdev_get_regmap(rdev);
|
|
u8 out_cfg[4];
|
|
int ret;
|
|
|
|
pm_runtime_get_sync(data->dev);
|
|
|
|
/*
|
|
* From off to on, vout config will restore to IC default.
|
|
* Read vout configs before enable, and restore them after enable
|
|
*/
|
|
ret = regmap_raw_read(regmap, RT6190_REG_OUTV, out_cfg,
|
|
sizeof(out_cfg));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regulator_enable_regmap(rdev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_raw_write(regmap, RT6190_REG_OUTV, out_cfg,
|
|
sizeof(out_cfg));
|
|
if (ret)
|
|
return ret;
|
|
|
|
return regmap_update_bits(regmap, RT6190_REG_SET5, RT6190_ENGCP_MASK,
|
|
RT6190_ENGCP_MASK);
|
|
}
|
|
|
|
static int rt6190_out_disable(struct regulator_dev *rdev)
|
|
{
|
|
struct rt6190_data *data = rdev_get_drvdata(rdev);
|
|
struct regmap *regmap = rdev_get_regmap(rdev);
|
|
int ret;
|
|
|
|
ret = regmap_update_bits(regmap, RT6190_REG_SET5, RT6190_ENGCP_MASK, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regulator_disable_regmap(rdev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* cleared cached alert event */
|
|
data->cached_alert_evt = 0;
|
|
|
|
pm_runtime_put(data->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rt6190_out_set_current_limit(struct regulator_dev *rdev, int min_uA,
|
|
int max_uA)
|
|
{
|
|
struct regmap *regmap = rdev_get_regmap(rdev);
|
|
int csel, clim;
|
|
__le16 le_csel;
|
|
|
|
if (min_uA < RT6190_OUT_MIN_UA || max_uA > RT6190_OUT_MAX_UA)
|
|
return -EINVAL;
|
|
|
|
csel = DIV_ROUND_UP(min_uA - RT6190_OUT_MIN_UA, RT6190_OUT_STEP_UA);
|
|
|
|
clim = RT6190_OUT_MIN_UA + RT6190_OUT_STEP_UA * csel;
|
|
if (clim > max_uA)
|
|
return -EINVAL;
|
|
|
|
csel += RT6190_OUTC_MINSEL;
|
|
le_csel = cpu_to_le16(csel);
|
|
|
|
return regmap_raw_write(regmap, RT6190_REG_OUTC, &le_csel,
|
|
sizeof(le_csel));
|
|
}
|
|
|
|
static int rt6190_out_get_current_limit(struct regulator_dev *rdev)
|
|
{
|
|
struct regmap *regmap = rdev_get_regmap(rdev);
|
|
__le16 le_csel;
|
|
int csel, ret;
|
|
|
|
ret = regmap_raw_read(regmap, RT6190_REG_OUTC, &le_csel,
|
|
sizeof(le_csel));
|
|
if (ret)
|
|
return ret;
|
|
|
|
csel = le16_to_cpu(le_csel);
|
|
csel -= RT6190_OUTC_MINSEL;
|
|
|
|
return RT6190_OUT_MIN_UA + RT6190_OUT_STEP_UA * csel;
|
|
}
|
|
|
|
static int rt6190_out_set_mode(struct regulator_dev *rdev, unsigned int mode)
|
|
{
|
|
struct regmap *regmap = rdev_get_regmap(rdev);
|
|
unsigned int val;
|
|
|
|
switch (mode) {
|
|
case REGULATOR_MODE_FAST:
|
|
val = RT6190_FCCM_MASK;
|
|
break;
|
|
case REGULATOR_MODE_NORMAL:
|
|
val = 0;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return regmap_update_bits(regmap, RT6190_REG_SET1, RT6190_FCCM_MASK,
|
|
val);
|
|
}
|
|
|
|
static unsigned int rt6190_out_get_mode(struct regulator_dev *rdev)
|
|
{
|
|
struct regmap *regmap = rdev_get_regmap(rdev);
|
|
unsigned int config;
|
|
int ret;
|
|
|
|
ret = regmap_read(regmap, RT6190_REG_SET1, &config);
|
|
if (ret)
|
|
return REGULATOR_MODE_INVALID;
|
|
|
|
if (config & RT6190_FCCM_MASK)
|
|
return REGULATOR_MODE_FAST;
|
|
|
|
return REGULATOR_MODE_NORMAL;
|
|
}
|
|
|
|
static int rt6190_out_get_error_flags(struct regulator_dev *rdev,
|
|
unsigned int *flags)
|
|
{
|
|
struct rt6190_data *data = rdev_get_drvdata(rdev);
|
|
unsigned int state, rpt_flags = 0;
|
|
int ret;
|
|
|
|
ret = regmap_read(data->regmap, RT6190_REG_STAT1, &state);
|
|
if (ret)
|
|
return ret;
|
|
|
|
state |= data->cached_alert_evt;
|
|
|
|
if (state & RT6190_ALERT_OTPEVT)
|
|
rpt_flags |= REGULATOR_ERROR_OVER_TEMP;
|
|
|
|
if (state & RT6190_ALERT_UVPEVT)
|
|
rpt_flags |= REGULATOR_ERROR_UNDER_VOLTAGE;
|
|
|
|
if (state & RT6190_ALERT_OVPEVT)
|
|
rpt_flags |= REGULATOR_ERROR_REGULATION_OUT;
|
|
|
|
*flags = rpt_flags;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int rt6190_out_of_map_mode(unsigned int mode)
|
|
{
|
|
switch (mode) {
|
|
case RT6190_PSM_MODE:
|
|
return REGULATOR_MODE_NORMAL;
|
|
case RT6190_FCCM_MODE:
|
|
return REGULATOR_MODE_FAST;
|
|
default:
|
|
return REGULATOR_MODE_INVALID;
|
|
}
|
|
}
|
|
|
|
static const struct regulator_ops rt6190_regulator_ops = {
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.set_voltage_sel = rt6190_out_set_voltage_sel,
|
|
.get_voltage_sel = rt6190_out_get_voltage_sel,
|
|
.enable = rt6190_out_enable,
|
|
.disable = rt6190_out_disable,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.set_current_limit = rt6190_out_set_current_limit,
|
|
.get_current_limit = rt6190_out_get_current_limit,
|
|
.set_active_discharge = regulator_set_active_discharge_regmap,
|
|
.set_mode = rt6190_out_set_mode,
|
|
.get_mode = rt6190_out_get_mode,
|
|
.get_error_flags = rt6190_out_get_error_flags,
|
|
};
|
|
|
|
static const struct regulator_desc rt6190_regulator_desc = {
|
|
.name = "rt6190-regulator",
|
|
.type = REGULATOR_VOLTAGE,
|
|
.owner = THIS_MODULE,
|
|
.ops = &rt6190_regulator_ops,
|
|
.min_uV = RT6190_OUT_MIN_UV,
|
|
.uV_step = RT6190_OUT_STEP_UV,
|
|
.n_voltages = RT6190_OUT_N_VOLT,
|
|
.linear_min_sel = RT6190_OUTV_MINSEL,
|
|
.enable_reg = RT6190_REG_SET2,
|
|
.enable_mask = RT6190_ENPWM_MASK,
|
|
.active_discharge_reg = RT6190_REG_SET2,
|
|
.active_discharge_mask = RT6190_ENDCHG_MASK,
|
|
.active_discharge_on = RT6190_ENDCHG_MASK,
|
|
.of_map_mode = rt6190_out_of_map_mode,
|
|
};
|
|
|
|
static bool rt6190_is_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case RT6190_REG_OUT_VOLT_L ... RT6190_REG_ALERT2:
|
|
case RT6190_REG_BUSC_VOLT_L ... RT6190_REG_BUSC_VOLT_H:
|
|
case RT6190_REG_STAT3 ... RT6190_REG_ALERT3:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static const struct regmap_config rt6190_regmap_config = {
|
|
.name = "rt6190",
|
|
.cache_type = REGCACHE_FLAT,
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = RT6190_REG_MASK3,
|
|
.num_reg_defaults_raw = RT6190_REG_MASK3 + 1,
|
|
.volatile_reg = rt6190_is_volatile_reg,
|
|
};
|
|
|
|
static irqreturn_t rt6190_irq_handler(int irq, void *devid)
|
|
{
|
|
struct regulator_dev *rdev = devid;
|
|
struct rt6190_data *data = rdev_get_drvdata(rdev);
|
|
unsigned int alert;
|
|
int ret;
|
|
|
|
ret = regmap_read(data->regmap, RT6190_REG_ALERT1, &alert);
|
|
if (ret)
|
|
return IRQ_NONE;
|
|
|
|
/* Write clear alert events */
|
|
ret = regmap_write(data->regmap, RT6190_REG_ALERT1, alert);
|
|
if (ret)
|
|
return IRQ_NONE;
|
|
|
|
data->cached_alert_evt |= alert;
|
|
|
|
if (alert & RT6190_ALERT_OTPEVT)
|
|
regulator_notifier_call_chain(rdev, REGULATOR_EVENT_OVER_TEMP, NULL);
|
|
|
|
if (alert & RT6190_ALERT_UVPEVT)
|
|
regulator_notifier_call_chain(rdev, REGULATOR_EVENT_UNDER_VOLTAGE, NULL);
|
|
|
|
if (alert & RT6190_ALERT_OVPEVT)
|
|
regulator_notifier_call_chain(rdev, REGULATOR_EVENT_REGULATION_OUT, NULL);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int rt6190_init_registers(struct regmap *regmap)
|
|
{
|
|
int ret;
|
|
|
|
/* Enable_ADC = 1 */
|
|
ret = regmap_write(regmap, RT6190_REG_SET4, 0x82);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Config default VOUT ratio to be higher */
|
|
ret = regmap_write(regmap, RT6190_REG_RATIO, 0x20);
|
|
|
|
/* Mask unused alert */
|
|
ret = regmap_write(regmap, RT6190_REG_MASK2, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* OCP config */
|
|
ret = regmap_write(regmap, RT6190_REG_OCPEN, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Enable VBUSC ADC */
|
|
return regmap_write(regmap, RT6190_REG_VBUSC_ADC, 0x02);
|
|
}
|
|
|
|
static int rt6190_probe(struct i2c_client *i2c)
|
|
{
|
|
struct device *dev = &i2c->dev;
|
|
struct rt6190_data *data;
|
|
struct gpio_desc *enable_gpio;
|
|
struct regmap *regmap;
|
|
struct regulator_dev *rdev;
|
|
struct regulator_config cfg = {};
|
|
unsigned int vid;
|
|
int ret;
|
|
|
|
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_HIGH);
|
|
if (IS_ERR(enable_gpio))
|
|
return dev_err_probe(dev, PTR_ERR(enable_gpio), "Failed to get 'enable' gpio\n");
|
|
else if (enable_gpio)
|
|
usleep_range(RT6190_EN_TIME_US, RT6190_EN_TIME_US * 2);
|
|
|
|
regmap = devm_regmap_init_i2c(i2c, &rt6190_regmap_config);
|
|
if (IS_ERR(regmap))
|
|
return dev_err_probe(dev, PTR_ERR(regmap), "Failed to init regmap\n");
|
|
|
|
data->dev = dev;
|
|
data->enable_gpio = enable_gpio;
|
|
data->regmap = regmap;
|
|
i2c_set_clientdata(i2c, data);
|
|
|
|
ret = regmap_read(regmap, RT6190_REG_VID, &vid);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret, "Failed to read VID\n");
|
|
|
|
if (vid != RICHTEK_VID)
|
|
return dev_err_probe(dev, -ENODEV, "Incorrect VID 0x%02x\n", vid);
|
|
|
|
ret = rt6190_init_registers(regmap);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret, "Failed to init registers\n");
|
|
|
|
pm_runtime_set_active(dev);
|
|
ret = devm_pm_runtime_enable(dev);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret, "Failed to set pm_runtime enable\n");
|
|
|
|
cfg.dev = dev;
|
|
cfg.of_node = dev->of_node;
|
|
cfg.driver_data = data;
|
|
cfg.init_data = of_get_regulator_init_data(dev, dev->of_node,
|
|
&rt6190_regulator_desc);
|
|
|
|
rdev = devm_regulator_register(dev, &rt6190_regulator_desc, &cfg);
|
|
if (IS_ERR(rdev))
|
|
return dev_err_probe(dev, PTR_ERR(rdev), "Failed to register regulator\n");
|
|
|
|
if (i2c->irq) {
|
|
ret = devm_request_threaded_irq(dev, i2c->irq, NULL,
|
|
rt6190_irq_handler,
|
|
IRQF_ONESHOT, dev_name(dev),
|
|
rdev);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret, "Failed to register interrupt\n");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rt6190_runtime_suspend(struct device *dev)
|
|
{
|
|
struct rt6190_data *data = dev_get_drvdata(dev);
|
|
struct regmap *regmap = data->regmap;
|
|
|
|
if (!data->enable_gpio)
|
|
return 0;
|
|
|
|
regcache_cache_only(regmap, true);
|
|
regcache_mark_dirty(regmap);
|
|
|
|
gpiod_set_value(data->enable_gpio, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rt6190_runtime_resume(struct device *dev)
|
|
{
|
|
struct rt6190_data *data = dev_get_drvdata(dev);
|
|
struct regmap *regmap = data->regmap;
|
|
|
|
if (!data->enable_gpio)
|
|
return 0;
|
|
|
|
gpiod_set_value(data->enable_gpio, 1);
|
|
usleep_range(RT6190_EN_TIME_US, RT6190_EN_TIME_US * 2);
|
|
|
|
regcache_cache_only(regmap, false);
|
|
return regcache_sync(regmap);
|
|
}
|
|
|
|
static const struct dev_pm_ops __maybe_unused rt6190_dev_pm = {
|
|
RUNTIME_PM_OPS(rt6190_runtime_suspend, rt6190_runtime_resume, NULL)
|
|
};
|
|
|
|
static const struct of_device_id rt6190_of_dev_table[] = {
|
|
{ .compatible = "richtek,rt6190" },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, rt6190_of_dev_table);
|
|
|
|
static struct i2c_driver rt6190_driver = {
|
|
.driver = {
|
|
.name = "rt6190",
|
|
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
|
|
.of_match_table = rt6190_of_dev_table,
|
|
.pm = pm_ptr(&rt6190_dev_pm),
|
|
},
|
|
.probe = rt6190_probe,
|
|
};
|
|
module_i2c_driver(rt6190_driver);
|
|
|
|
MODULE_DESCRIPTION("Richtek RT6190 regulator driver");
|
|
MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
|
|
MODULE_LICENSE("GPL");
|