mirror of
https://github.com/torvalds/linux.git
synced 2024-12-27 05:11:48 +00:00
17d900c4a1
There are certain devices that are reportedly so slow that they need more than 100 ms to handle control transfers. Therefore, increase the timeout in mixer(_quirks).c to 1000 ms. The timeout parameter of snd_usb_ctl_msg() is now constant, so we can drop it. Reported-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
761 lines
22 KiB
C
761 lines
22 KiB
C
/*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/audio.h>
|
|
|
|
#include <sound/control.h>
|
|
#include <sound/core.h>
|
|
#include <sound/info.h>
|
|
#include <sound/pcm.h>
|
|
|
|
#include "usbaudio.h"
|
|
#include "card.h"
|
|
#include "mixer.h"
|
|
#include "mixer_quirks.h"
|
|
#include "midi.h"
|
|
#include "quirks.h"
|
|
#include "helper.h"
|
|
#include "endpoint.h"
|
|
#include "pcm.h"
|
|
#include "clock.h"
|
|
#include "stream.h"
|
|
|
|
/*
|
|
* handle the quirks for the contained interfaces
|
|
*/
|
|
static int create_composite_quirk(struct snd_usb_audio *chip,
|
|
struct usb_interface *iface,
|
|
struct usb_driver *driver,
|
|
const struct snd_usb_audio_quirk *quirk)
|
|
{
|
|
int probed_ifnum = get_iface_desc(iface->altsetting)->bInterfaceNumber;
|
|
int err;
|
|
|
|
for (quirk = quirk->data; quirk->ifnum >= 0; ++quirk) {
|
|
iface = usb_ifnum_to_if(chip->dev, quirk->ifnum);
|
|
if (!iface)
|
|
continue;
|
|
if (quirk->ifnum != probed_ifnum &&
|
|
usb_interface_claimed(iface))
|
|
continue;
|
|
err = snd_usb_create_quirk(chip, iface, driver, quirk);
|
|
if (err < 0)
|
|
return err;
|
|
if (quirk->ifnum != probed_ifnum)
|
|
usb_driver_claim_interface(driver, iface, (void *)-1L);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int ignore_interface_quirk(struct snd_usb_audio *chip,
|
|
struct usb_interface *iface,
|
|
struct usb_driver *driver,
|
|
const struct snd_usb_audio_quirk *quirk)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* Allow alignment on audio sub-slot (channel samples) rather than
|
|
* on audio slots (audio frames)
|
|
*/
|
|
static int create_align_transfer_quirk(struct snd_usb_audio *chip,
|
|
struct usb_interface *iface,
|
|
struct usb_driver *driver,
|
|
const struct snd_usb_audio_quirk *quirk)
|
|
{
|
|
chip->txfr_quirk = 1;
|
|
return 1; /* Continue with creating streams and mixer */
|
|
}
|
|
|
|
static int create_any_midi_quirk(struct snd_usb_audio *chip,
|
|
struct usb_interface *intf,
|
|
struct usb_driver *driver,
|
|
const struct snd_usb_audio_quirk *quirk)
|
|
{
|
|
return snd_usbmidi_create(chip->card, intf, &chip->midi_list, quirk);
|
|
}
|
|
|
|
/*
|
|
* create a stream for an interface with proper descriptors
|
|
*/
|
|
static int create_standard_audio_quirk(struct snd_usb_audio *chip,
|
|
struct usb_interface *iface,
|
|
struct usb_driver *driver,
|
|
const struct snd_usb_audio_quirk *quirk)
|
|
{
|
|
struct usb_host_interface *alts;
|
|
struct usb_interface_descriptor *altsd;
|
|
int err;
|
|
|
|
alts = &iface->altsetting[0];
|
|
altsd = get_iface_desc(alts);
|
|
err = snd_usb_parse_audio_interface(chip, altsd->bInterfaceNumber);
|
|
if (err < 0) {
|
|
snd_printk(KERN_ERR "cannot setup if %d: error %d\n",
|
|
altsd->bInterfaceNumber, err);
|
|
return err;
|
|
}
|
|
/* reset the current interface */
|
|
usb_set_interface(chip->dev, altsd->bInterfaceNumber, 0);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* create a stream for an endpoint/altsetting without proper descriptors
|
|
*/
|
|
static int create_fixed_stream_quirk(struct snd_usb_audio *chip,
|
|
struct usb_interface *iface,
|
|
struct usb_driver *driver,
|
|
const struct snd_usb_audio_quirk *quirk)
|
|
{
|
|
struct audioformat *fp;
|
|
struct usb_host_interface *alts;
|
|
int stream, err;
|
|
unsigned *rate_table = NULL;
|
|
|
|
fp = kmemdup(quirk->data, sizeof(*fp), GFP_KERNEL);
|
|
if (! fp) {
|
|
snd_printk(KERN_ERR "cannot memdup\n");
|
|
return -ENOMEM;
|
|
}
|
|
if (fp->nr_rates > 0) {
|
|
rate_table = kmalloc(sizeof(int) * fp->nr_rates, GFP_KERNEL);
|
|
if (!rate_table) {
|
|
kfree(fp);
|
|
return -ENOMEM;
|
|
}
|
|
memcpy(rate_table, fp->rate_table, sizeof(int) * fp->nr_rates);
|
|
fp->rate_table = rate_table;
|
|
}
|
|
|
|
stream = (fp->endpoint & USB_DIR_IN)
|
|
? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
|
|
err = snd_usb_add_audio_stream(chip, stream, fp);
|
|
if (err < 0) {
|
|
kfree(fp);
|
|
kfree(rate_table);
|
|
return err;
|
|
}
|
|
if (fp->iface != get_iface_desc(&iface->altsetting[0])->bInterfaceNumber ||
|
|
fp->altset_idx >= iface->num_altsetting) {
|
|
kfree(fp);
|
|
kfree(rate_table);
|
|
return -EINVAL;
|
|
}
|
|
alts = &iface->altsetting[fp->altset_idx];
|
|
fp->datainterval = snd_usb_parse_datainterval(chip, alts);
|
|
fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize);
|
|
usb_set_interface(chip->dev, fp->iface, 0);
|
|
snd_usb_init_pitch(chip, fp->iface, alts, fp);
|
|
snd_usb_init_sample_rate(chip, fp->iface, alts, fp, fp->rate_max);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Create a stream for an Edirol UA-700/UA-25/UA-4FX interface.
|
|
* The only way to detect the sample rate is by looking at wMaxPacketSize.
|
|
*/
|
|
static int create_uaxx_quirk(struct snd_usb_audio *chip,
|
|
struct usb_interface *iface,
|
|
struct usb_driver *driver,
|
|
const struct snd_usb_audio_quirk *quirk)
|
|
{
|
|
static const struct audioformat ua_format = {
|
|
.formats = SNDRV_PCM_FMTBIT_S24_3LE,
|
|
.channels = 2,
|
|
.fmt_type = UAC_FORMAT_TYPE_I,
|
|
.altsetting = 1,
|
|
.altset_idx = 1,
|
|
.rates = SNDRV_PCM_RATE_CONTINUOUS,
|
|
};
|
|
struct usb_host_interface *alts;
|
|
struct usb_interface_descriptor *altsd;
|
|
struct audioformat *fp;
|
|
int stream, err;
|
|
|
|
/* both PCM and MIDI interfaces have 2 or more altsettings */
|
|
if (iface->num_altsetting < 2)
|
|
return -ENXIO;
|
|
alts = &iface->altsetting[1];
|
|
altsd = get_iface_desc(alts);
|
|
|
|
if (altsd->bNumEndpoints == 2) {
|
|
static const struct snd_usb_midi_endpoint_info ua700_ep = {
|
|
.out_cables = 0x0003,
|
|
.in_cables = 0x0003
|
|
};
|
|
static const struct snd_usb_audio_quirk ua700_quirk = {
|
|
.type = QUIRK_MIDI_FIXED_ENDPOINT,
|
|
.data = &ua700_ep
|
|
};
|
|
static const struct snd_usb_midi_endpoint_info uaxx_ep = {
|
|
.out_cables = 0x0001,
|
|
.in_cables = 0x0001
|
|
};
|
|
static const struct snd_usb_audio_quirk uaxx_quirk = {
|
|
.type = QUIRK_MIDI_FIXED_ENDPOINT,
|
|
.data = &uaxx_ep
|
|
};
|
|
const struct snd_usb_audio_quirk *quirk =
|
|
chip->usb_id == USB_ID(0x0582, 0x002b)
|
|
? &ua700_quirk : &uaxx_quirk;
|
|
return snd_usbmidi_create(chip->card, iface,
|
|
&chip->midi_list, quirk);
|
|
}
|
|
|
|
if (altsd->bNumEndpoints != 1)
|
|
return -ENXIO;
|
|
|
|
fp = kmalloc(sizeof(*fp), GFP_KERNEL);
|
|
if (!fp)
|
|
return -ENOMEM;
|
|
memcpy(fp, &ua_format, sizeof(*fp));
|
|
|
|
fp->iface = altsd->bInterfaceNumber;
|
|
fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress;
|
|
fp->ep_attr = get_endpoint(alts, 0)->bmAttributes;
|
|
fp->datainterval = 0;
|
|
fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize);
|
|
|
|
switch (fp->maxpacksize) {
|
|
case 0x120:
|
|
fp->rate_max = fp->rate_min = 44100;
|
|
break;
|
|
case 0x138:
|
|
case 0x140:
|
|
fp->rate_max = fp->rate_min = 48000;
|
|
break;
|
|
case 0x258:
|
|
case 0x260:
|
|
fp->rate_max = fp->rate_min = 96000;
|
|
break;
|
|
default:
|
|
snd_printk(KERN_ERR "unknown sample rate\n");
|
|
kfree(fp);
|
|
return -ENXIO;
|
|
}
|
|
|
|
stream = (fp->endpoint & USB_DIR_IN)
|
|
? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
|
|
err = snd_usb_add_audio_stream(chip, stream, fp);
|
|
if (err < 0) {
|
|
kfree(fp);
|
|
return err;
|
|
}
|
|
usb_set_interface(chip->dev, fp->iface, 0);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Create a standard mixer for the specified interface.
|
|
*/
|
|
static int create_standard_mixer_quirk(struct snd_usb_audio *chip,
|
|
struct usb_interface *iface,
|
|
struct usb_driver *driver,
|
|
const struct snd_usb_audio_quirk *quirk)
|
|
{
|
|
if (quirk->ifnum < 0)
|
|
return 0;
|
|
|
|
return snd_usb_create_mixer(chip, quirk->ifnum, 0);
|
|
}
|
|
|
|
/*
|
|
* audio-interface quirks
|
|
*
|
|
* returns zero if no standard audio/MIDI parsing is needed.
|
|
* returns a positive value if standard audio/midi interfaces are parsed
|
|
* after this.
|
|
* returns a negative value at error.
|
|
*/
|
|
int snd_usb_create_quirk(struct snd_usb_audio *chip,
|
|
struct usb_interface *iface,
|
|
struct usb_driver *driver,
|
|
const struct snd_usb_audio_quirk *quirk)
|
|
{
|
|
typedef int (*quirk_func_t)(struct snd_usb_audio *,
|
|
struct usb_interface *,
|
|
struct usb_driver *,
|
|
const struct snd_usb_audio_quirk *);
|
|
static const quirk_func_t quirk_funcs[] = {
|
|
[QUIRK_IGNORE_INTERFACE] = ignore_interface_quirk,
|
|
[QUIRK_COMPOSITE] = create_composite_quirk,
|
|
[QUIRK_MIDI_STANDARD_INTERFACE] = create_any_midi_quirk,
|
|
[QUIRK_MIDI_FIXED_ENDPOINT] = create_any_midi_quirk,
|
|
[QUIRK_MIDI_YAMAHA] = create_any_midi_quirk,
|
|
[QUIRK_MIDI_MIDIMAN] = create_any_midi_quirk,
|
|
[QUIRK_MIDI_NOVATION] = create_any_midi_quirk,
|
|
[QUIRK_MIDI_RAW_BYTES] = create_any_midi_quirk,
|
|
[QUIRK_MIDI_EMAGIC] = create_any_midi_quirk,
|
|
[QUIRK_MIDI_CME] = create_any_midi_quirk,
|
|
[QUIRK_MIDI_AKAI] = create_any_midi_quirk,
|
|
[QUIRK_MIDI_FTDI] = create_any_midi_quirk,
|
|
[QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk,
|
|
[QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk,
|
|
[QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk,
|
|
[QUIRK_AUDIO_ALIGN_TRANSFER] = create_align_transfer_quirk,
|
|
[QUIRK_AUDIO_STANDARD_MIXER] = create_standard_mixer_quirk,
|
|
};
|
|
|
|
if (quirk->type < QUIRK_TYPE_COUNT) {
|
|
return quirk_funcs[quirk->type](chip, iface, driver, quirk);
|
|
} else {
|
|
snd_printd(KERN_ERR "invalid quirk type %d\n", quirk->type);
|
|
return -ENXIO;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* boot quirks
|
|
*/
|
|
|
|
#define EXTIGY_FIRMWARE_SIZE_OLD 794
|
|
#define EXTIGY_FIRMWARE_SIZE_NEW 483
|
|
|
|
static int snd_usb_extigy_boot_quirk(struct usb_device *dev, struct usb_interface *intf)
|
|
{
|
|
struct usb_host_config *config = dev->actconfig;
|
|
int err;
|
|
|
|
if (le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_OLD ||
|
|
le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_NEW) {
|
|
snd_printdd("sending Extigy boot sequence...\n");
|
|
/* Send message to force it to reconnect with full interface. */
|
|
err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev,0),
|
|
0x10, 0x43, 0x0001, 0x000a, NULL, 0);
|
|
if (err < 0) snd_printdd("error sending boot message: %d\n", err);
|
|
err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
|
|
&dev->descriptor, sizeof(dev->descriptor));
|
|
config = dev->actconfig;
|
|
if (err < 0) snd_printdd("error usb_get_descriptor: %d\n", err);
|
|
err = usb_reset_configuration(dev);
|
|
if (err < 0) snd_printdd("error usb_reset_configuration: %d\n", err);
|
|
snd_printdd("extigy_boot: new boot length = %d\n",
|
|
le16_to_cpu(get_cfg_desc(config)->wTotalLength));
|
|
return -ENODEV; /* quit this anyway */
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int snd_usb_audigy2nx_boot_quirk(struct usb_device *dev)
|
|
{
|
|
u8 buf = 1;
|
|
|
|
snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), 0x2a,
|
|
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER,
|
|
0, 0, &buf, 1);
|
|
if (buf == 0) {
|
|
snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0x29,
|
|
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
|
|
1, 2000, NULL, 0);
|
|
return -ENODEV;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int snd_usb_fasttrackpro_boot_quirk(struct usb_device *dev)
|
|
{
|
|
int err;
|
|
|
|
if (dev->actconfig->desc.bConfigurationValue == 1) {
|
|
snd_printk(KERN_INFO "usb-audio: "
|
|
"Fast Track Pro switching to config #2\n");
|
|
/* This function has to be available by the usb core module.
|
|
* if it is not avialable the boot quirk has to be left out
|
|
* and the configuration has to be set by udev or hotplug
|
|
* rules
|
|
*/
|
|
err = usb_driver_set_configuration(dev, 2);
|
|
if (err < 0) {
|
|
snd_printdd("error usb_driver_set_configuration: %d\n",
|
|
err);
|
|
return -ENODEV;
|
|
}
|
|
} else
|
|
snd_printk(KERN_INFO "usb-audio: Fast Track Pro config OK\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* C-Media CM106/CM106+ have four 16-bit internal registers that are nicely
|
|
* documented in the device's data sheet.
|
|
*/
|
|
static int snd_usb_cm106_write_int_reg(struct usb_device *dev, int reg, u16 value)
|
|
{
|
|
u8 buf[4];
|
|
buf[0] = 0x20;
|
|
buf[1] = value & 0xff;
|
|
buf[2] = (value >> 8) & 0xff;
|
|
buf[3] = reg;
|
|
return snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_CONFIGURATION,
|
|
USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_ENDPOINT,
|
|
0, 0, &buf, 4);
|
|
}
|
|
|
|
static int snd_usb_cm106_boot_quirk(struct usb_device *dev)
|
|
{
|
|
/*
|
|
* Enable line-out driver mode, set headphone source to front
|
|
* channels, enable stereo mic.
|
|
*/
|
|
return snd_usb_cm106_write_int_reg(dev, 2, 0x8004);
|
|
}
|
|
|
|
/*
|
|
* C-Media CM6206 is based on CM106 with two additional
|
|
* registers that are not documented in the data sheet.
|
|
* Values here are chosen based on sniffing USB traffic
|
|
* under Windows.
|
|
*/
|
|
static int snd_usb_cm6206_boot_quirk(struct usb_device *dev)
|
|
{
|
|
int err = 0, reg;
|
|
int val[] = {0x2004, 0x3000, 0xf800, 0x143f, 0x0000, 0x3000};
|
|
|
|
for (reg = 0; reg < ARRAY_SIZE(val); reg++) {
|
|
err = snd_usb_cm106_write_int_reg(dev, reg, val[reg]);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* This call will put the synth in "USB send" mode, i.e it will send MIDI
|
|
* messages through USB (this is disabled at startup). The synth will
|
|
* acknowledge by sending a sysex on endpoint 0x85 and by displaying a USB
|
|
* sign on its LCD. Values here are chosen based on sniffing USB traffic
|
|
* under Windows.
|
|
*/
|
|
static int snd_usb_accessmusic_boot_quirk(struct usb_device *dev)
|
|
{
|
|
int err, actual_length;
|
|
|
|
/* "midi send" enable */
|
|
static const u8 seq[] = { 0x4e, 0x73, 0x52, 0x01 };
|
|
|
|
void *buf = kmemdup(seq, ARRAY_SIZE(seq), GFP_KERNEL);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
err = usb_interrupt_msg(dev, usb_sndintpipe(dev, 0x05), buf,
|
|
ARRAY_SIZE(seq), &actual_length, 1000);
|
|
kfree(buf);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Some sound cards from Native Instruments are in fact compliant to the USB
|
|
* audio standard of version 2 and other approved USB standards, even though
|
|
* they come up as vendor-specific device when first connected.
|
|
*
|
|
* However, they can be told to come up with a new set of descriptors
|
|
* upon their next enumeration, and the interfaces announced by the new
|
|
* descriptors will then be handled by the kernel's class drivers. As the
|
|
* product ID will also change, no further checks are required.
|
|
*/
|
|
|
|
static int snd_usb_nativeinstruments_boot_quirk(struct usb_device *dev)
|
|
{
|
|
int ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
|
|
0xaf, USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
|
cpu_to_le16(1), 0, NULL, 0, 1000);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
usb_reset_device(dev);
|
|
|
|
/* return -EAGAIN, so the creation of an audio interface for this
|
|
* temporary device is aborted. The device will reconnect with a
|
|
* new product ID */
|
|
return -EAGAIN;
|
|
}
|
|
|
|
/*
|
|
* Setup quirks
|
|
*/
|
|
#define MAUDIO_SET 0x01 /* parse device_setup */
|
|
#define MAUDIO_SET_COMPATIBLE 0x80 /* use only "win-compatible" interfaces */
|
|
#define MAUDIO_SET_DTS 0x02 /* enable DTS Digital Output */
|
|
#define MAUDIO_SET_96K 0x04 /* 48-96KHz rate if set, 8-48KHz otherwise */
|
|
#define MAUDIO_SET_24B 0x08 /* 24bits sample if set, 16bits otherwise */
|
|
#define MAUDIO_SET_DI 0x10 /* enable Digital Input */
|
|
#define MAUDIO_SET_MASK 0x1f /* bit mask for setup value */
|
|
#define MAUDIO_SET_24B_48K_DI 0x19 /* 24bits+48KHz+Digital Input */
|
|
#define MAUDIO_SET_24B_48K_NOTDI 0x09 /* 24bits+48KHz+No Digital Input */
|
|
#define MAUDIO_SET_16B_48K_DI 0x11 /* 16bits+48KHz+Digital Input */
|
|
#define MAUDIO_SET_16B_48K_NOTDI 0x01 /* 16bits+48KHz+No Digital Input */
|
|
|
|
static int quattro_skip_setting_quirk(struct snd_usb_audio *chip,
|
|
int iface, int altno)
|
|
{
|
|
/* Reset ALL ifaces to 0 altsetting.
|
|
* Call it for every possible altsetting of every interface.
|
|
*/
|
|
usb_set_interface(chip->dev, iface, 0);
|
|
if (chip->setup & MAUDIO_SET) {
|
|
if (chip->setup & MAUDIO_SET_COMPATIBLE) {
|
|
if (iface != 1 && iface != 2)
|
|
return 1; /* skip all interfaces but 1 and 2 */
|
|
} else {
|
|
unsigned int mask;
|
|
if (iface == 1 || iface == 2)
|
|
return 1; /* skip interfaces 1 and 2 */
|
|
if ((chip->setup & MAUDIO_SET_96K) && altno != 1)
|
|
return 1; /* skip this altsetting */
|
|
mask = chip->setup & MAUDIO_SET_MASK;
|
|
if (mask == MAUDIO_SET_24B_48K_DI && altno != 2)
|
|
return 1; /* skip this altsetting */
|
|
if (mask == MAUDIO_SET_24B_48K_NOTDI && altno != 3)
|
|
return 1; /* skip this altsetting */
|
|
if (mask == MAUDIO_SET_16B_48K_NOTDI && altno != 4)
|
|
return 1; /* skip this altsetting */
|
|
}
|
|
}
|
|
snd_printdd(KERN_INFO
|
|
"using altsetting %d for interface %d config %d\n",
|
|
altno, iface, chip->setup);
|
|
return 0; /* keep this altsetting */
|
|
}
|
|
|
|
static int audiophile_skip_setting_quirk(struct snd_usb_audio *chip,
|
|
int iface,
|
|
int altno)
|
|
{
|
|
/* Reset ALL ifaces to 0 altsetting.
|
|
* Call it for every possible altsetting of every interface.
|
|
*/
|
|
usb_set_interface(chip->dev, iface, 0);
|
|
|
|
if (chip->setup & MAUDIO_SET) {
|
|
unsigned int mask;
|
|
if ((chip->setup & MAUDIO_SET_DTS) && altno != 6)
|
|
return 1; /* skip this altsetting */
|
|
if ((chip->setup & MAUDIO_SET_96K) && altno != 1)
|
|
return 1; /* skip this altsetting */
|
|
mask = chip->setup & MAUDIO_SET_MASK;
|
|
if (mask == MAUDIO_SET_24B_48K_DI && altno != 2)
|
|
return 1; /* skip this altsetting */
|
|
if (mask == MAUDIO_SET_24B_48K_NOTDI && altno != 3)
|
|
return 1; /* skip this altsetting */
|
|
if (mask == MAUDIO_SET_16B_48K_DI && altno != 4)
|
|
return 1; /* skip this altsetting */
|
|
if (mask == MAUDIO_SET_16B_48K_NOTDI && altno != 5)
|
|
return 1; /* skip this altsetting */
|
|
}
|
|
|
|
return 0; /* keep this altsetting */
|
|
}
|
|
|
|
|
|
static int fasttrackpro_skip_setting_quirk(struct snd_usb_audio *chip,
|
|
int iface, int altno)
|
|
{
|
|
/* Reset ALL ifaces to 0 altsetting.
|
|
* Call it for every possible altsetting of every interface.
|
|
*/
|
|
usb_set_interface(chip->dev, iface, 0);
|
|
|
|
/* possible configuration where both inputs and only one output is
|
|
*used is not supported by the current setup
|
|
*/
|
|
if (chip->setup & (MAUDIO_SET | MAUDIO_SET_24B)) {
|
|
if (chip->setup & MAUDIO_SET_96K) {
|
|
if (altno != 3 && altno != 6)
|
|
return 1;
|
|
} else if (chip->setup & MAUDIO_SET_DI) {
|
|
if (iface == 4)
|
|
return 1; /* no analog input */
|
|
if (altno != 2 && altno != 5)
|
|
return 1; /* enable only altsets 2 and 5 */
|
|
} else {
|
|
if (iface == 5)
|
|
return 1; /* disable digialt input */
|
|
if (altno != 2 && altno != 5)
|
|
return 1; /* enalbe only altsets 2 and 5 */
|
|
}
|
|
} else {
|
|
/* keep only 16-Bit mode */
|
|
if (altno != 1)
|
|
return 1;
|
|
}
|
|
|
|
snd_printdd(KERN_INFO
|
|
"using altsetting %d for interface %d config %d\n",
|
|
altno, iface, chip->setup);
|
|
return 0; /* keep this altsetting */
|
|
}
|
|
|
|
int snd_usb_apply_interface_quirk(struct snd_usb_audio *chip,
|
|
int iface,
|
|
int altno)
|
|
{
|
|
/* audiophile usb: skip altsets incompatible with device_setup */
|
|
if (chip->usb_id == USB_ID(0x0763, 0x2003))
|
|
return audiophile_skip_setting_quirk(chip, iface, altno);
|
|
/* quattro usb: skip altsets incompatible with device_setup */
|
|
if (chip->usb_id == USB_ID(0x0763, 0x2001))
|
|
return quattro_skip_setting_quirk(chip, iface, altno);
|
|
/* fasttrackpro usb: skip altsets incompatible with device_setup */
|
|
if (chip->usb_id == USB_ID(0x0763, 0x2012))
|
|
return fasttrackpro_skip_setting_quirk(chip, iface, altno);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int snd_usb_apply_boot_quirk(struct usb_device *dev,
|
|
struct usb_interface *intf,
|
|
const struct snd_usb_audio_quirk *quirk)
|
|
{
|
|
u32 id = USB_ID(le16_to_cpu(dev->descriptor.idVendor),
|
|
le16_to_cpu(dev->descriptor.idProduct));
|
|
|
|
switch (id) {
|
|
case USB_ID(0x041e, 0x3000):
|
|
/* SB Extigy needs special boot-up sequence */
|
|
/* if more models come, this will go to the quirk list. */
|
|
return snd_usb_extigy_boot_quirk(dev, intf);
|
|
|
|
case USB_ID(0x041e, 0x3020):
|
|
/* SB Audigy 2 NX needs its own boot-up magic, too */
|
|
return snd_usb_audigy2nx_boot_quirk(dev);
|
|
|
|
case USB_ID(0x10f5, 0x0200):
|
|
/* C-Media CM106 / Turtle Beach Audio Advantage Roadie */
|
|
return snd_usb_cm106_boot_quirk(dev);
|
|
|
|
case USB_ID(0x0d8c, 0x0102):
|
|
/* C-Media CM6206 / CM106-Like Sound Device */
|
|
case USB_ID(0x0ccd, 0x00b1): /* Terratec Aureon 7.1 USB */
|
|
return snd_usb_cm6206_boot_quirk(dev);
|
|
|
|
case USB_ID(0x133e, 0x0815):
|
|
/* Access Music VirusTI Desktop */
|
|
return snd_usb_accessmusic_boot_quirk(dev);
|
|
|
|
case USB_ID(0x17cc, 0x1000): /* Komplete Audio 6 */
|
|
case USB_ID(0x17cc, 0x1010): /* Traktor Audio 6 */
|
|
case USB_ID(0x17cc, 0x1020): /* Traktor Audio 10 */
|
|
return snd_usb_nativeinstruments_boot_quirk(dev);
|
|
case USB_ID(0x0763, 0x2012): /* M-Audio Fast Track Pro USB */
|
|
return snd_usb_fasttrackpro_boot_quirk(dev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* check if the device uses big-endian samples
|
|
*/
|
|
int snd_usb_is_big_endian_format(struct snd_usb_audio *chip, struct audioformat *fp)
|
|
{
|
|
/* it depends on altsetting wether the device is big-endian or not */
|
|
switch (chip->usb_id) {
|
|
case USB_ID(0x0763, 0x2001): /* M-Audio Quattro: captured data only */
|
|
if (fp->altsetting == 2 || fp->altsetting == 3 ||
|
|
fp->altsetting == 5 || fp->altsetting == 6)
|
|
return 1;
|
|
break;
|
|
case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */
|
|
if (chip->setup == 0x00 ||
|
|
fp->altsetting == 1 || fp->altsetting == 2 ||
|
|
fp->altsetting == 3)
|
|
return 1;
|
|
break;
|
|
case USB_ID(0x0763, 0x2012): /* M-Audio Fast Track Pro */
|
|
if (fp->altsetting == 2 || fp->altsetting == 3 ||
|
|
fp->altsetting == 5 || fp->altsetting == 6)
|
|
return 1;
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* For E-Mu 0404USB/0202USB/TrackerPre/0204 sample rate should be set for device,
|
|
* not for interface.
|
|
*/
|
|
|
|
enum {
|
|
EMU_QUIRK_SR_44100HZ = 0,
|
|
EMU_QUIRK_SR_48000HZ,
|
|
EMU_QUIRK_SR_88200HZ,
|
|
EMU_QUIRK_SR_96000HZ,
|
|
EMU_QUIRK_SR_176400HZ,
|
|
EMU_QUIRK_SR_192000HZ
|
|
};
|
|
|
|
static void set_format_emu_quirk(struct snd_usb_substream *subs,
|
|
struct audioformat *fmt)
|
|
{
|
|
unsigned char emu_samplerate_id = 0;
|
|
|
|
/* When capture is active
|
|
* sample rate shouldn't be changed
|
|
* by playback substream
|
|
*/
|
|
if (subs->direction == SNDRV_PCM_STREAM_PLAYBACK) {
|
|
if (subs->stream->substream[SNDRV_PCM_STREAM_CAPTURE].interface != -1)
|
|
return;
|
|
}
|
|
|
|
switch (fmt->rate_min) {
|
|
case 48000:
|
|
emu_samplerate_id = EMU_QUIRK_SR_48000HZ;
|
|
break;
|
|
case 88200:
|
|
emu_samplerate_id = EMU_QUIRK_SR_88200HZ;
|
|
break;
|
|
case 96000:
|
|
emu_samplerate_id = EMU_QUIRK_SR_96000HZ;
|
|
break;
|
|
case 176400:
|
|
emu_samplerate_id = EMU_QUIRK_SR_176400HZ;
|
|
break;
|
|
case 192000:
|
|
emu_samplerate_id = EMU_QUIRK_SR_192000HZ;
|
|
break;
|
|
default:
|
|
emu_samplerate_id = EMU_QUIRK_SR_44100HZ;
|
|
break;
|
|
}
|
|
snd_emuusb_set_samplerate(subs->stream->chip, emu_samplerate_id);
|
|
}
|
|
|
|
void snd_usb_set_format_quirk(struct snd_usb_substream *subs,
|
|
struct audioformat *fmt)
|
|
{
|
|
switch (subs->stream->chip->usb_id) {
|
|
case USB_ID(0x041e, 0x3f02): /* E-Mu 0202 USB */
|
|
case USB_ID(0x041e, 0x3f04): /* E-Mu 0404 USB */
|
|
case USB_ID(0x041e, 0x3f0a): /* E-Mu Tracker Pre */
|
|
case USB_ID(0x041e, 0x3f19): /* E-Mu 0204 USB */
|
|
set_format_emu_quirk(subs, fmt);
|
|
break;
|
|
}
|
|
}
|
|
|