mirror of
https://github.com/torvalds/linux.git
synced 2024-11-07 04:32:03 +00:00
3d49538364
The omap3_pmx_core pinmux device in the device tree handles the system controller module (SCM) PADCONFS fonction. Its control registers are split in two distinct areas, with other SCM registers in-between. Those other registers can't thus be requested by other drivers as the memory region gets reserved by the pinmux driver. Split the omap3_pmx_core device tree node in two for the two memory regions. The second region address and size depends on the SoC model. The change in omap3.dtsi fixes an "external abort on non-linefetch" when doing cat /sys/kernel/debug/pinctrl/.../pins on a Nokia N900. Note that the core2 padconf region is different for 3430 vs 3630, and does not exist on 3517 as noted by Nishanth Menon <nm@ti.com>. Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-By: Sebastian Reichel <sre@debian.org> Signed-off-by: Nishanth Menon <nm@ti.com> [tony@atomide.com: updated for 3430 vs 3630 core2 based on Nishant's patch] Signed-off-by: Tony Lindgren <tony@atomide.com>
229 lines
6.6 KiB
Plaintext
229 lines
6.6 KiB
Plaintext
/*
|
|
* Device Tree Source for IGEPv2 Rev. (TI OMAP AM/DM37x)
|
|
*
|
|
* Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
|
|
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include "omap3-igep.dtsi"
|
|
#include "omap-gpmc-smsc911x.dtsi"
|
|
|
|
/ {
|
|
model = "IGEPv2 (TI OMAP AM/DM37x)";
|
|
compatible = "isee,omap3-igep0020", "ti,omap3";
|
|
|
|
leds {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&leds_pins>;
|
|
compatible = "gpio-leds";
|
|
|
|
boot {
|
|
label = "omap3:green:boot";
|
|
gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
|
|
default-state = "on";
|
|
};
|
|
|
|
user0 {
|
|
label = "omap3:red:user0";
|
|
gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
user1 {
|
|
label = "omap3:red:user1";
|
|
gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
user2 {
|
|
label = "omap3:green:user1";
|
|
gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
/* HS USB Port 1 Power */
|
|
hsusb1_power: hsusb1_power_reg {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "hsusb1_vbus";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* GPIO LEDA */
|
|
startup-delay-us = <70000>;
|
|
};
|
|
|
|
/* HS USB Host PHY on PORT 1 */
|
|
hsusb1_phy: hsusb1_phy {
|
|
compatible = "usb-nop-xceiv";
|
|
reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */
|
|
vcc-supply = <&hsusb1_power>;
|
|
};
|
|
};
|
|
|
|
&omap3_pmx_core {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <
|
|
&tfp410_pins
|
|
&dss_pins
|
|
>;
|
|
|
|
tfp410_pins: tfp410_dvi_pins {
|
|
pinctrl-single,pins = <
|
|
0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
|
|
>;
|
|
};
|
|
|
|
dss_pins: pinmux_dss_dvi_pins {
|
|
pinctrl-single,pins = <
|
|
0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
|
|
0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
|
|
0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
|
|
0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
|
|
0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
|
|
0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
|
|
0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
|
|
0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
|
|
0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
|
|
0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
|
|
0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
|
|
0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
|
|
0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
|
|
0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
|
|
0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
|
|
0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
|
|
0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
|
|
0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
|
|
0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
|
|
0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
|
|
0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
|
|
0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
|
|
0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
|
|
0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
|
|
0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
|
|
0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
|
|
0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
|
|
0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&omap3_pmx_core2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <
|
|
&hsusbb1_pins
|
|
>;
|
|
|
|
hsusbb1_pins: pinmux_hsusbb1_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3630_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */
|
|
OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */
|
|
OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d8.hsusb1_dir */
|
|
OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d9.hsusb1_nxt */
|
|
OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d0.hsusb1_data0 */
|
|
OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d1.hsusb1_data1 */
|
|
OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d2.hsusb1_data2 */
|
|
OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d3.hsusb1_data7 */
|
|
OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d4.hsusb1_data4 */
|
|
OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d5.hsusb1_data5 */
|
|
OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d6.hsusb1_data6 */
|
|
OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */
|
|
>;
|
|
};
|
|
|
|
leds_pins: pinmux_leds_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3630_CORE2_IOPAD(0x25f4, PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */
|
|
OMAP3630_CORE2_IOPAD(0x25f6, PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */
|
|
OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&i2c3 {
|
|
clock-frequency = <100000>;
|
|
|
|
/*
|
|
* Display monitor features are burnt in the EEPROM
|
|
* as EDID data.
|
|
*/
|
|
eeprom@50 {
|
|
compatible = "ti,eeprom";
|
|
reg = <0x50>;
|
|
};
|
|
};
|
|
|
|
&gpmc {
|
|
ranges = <0 0 0x00000000 0x20000000>,
|
|
<5 0 0x2c000000 0x01000000>;
|
|
|
|
nand@0,0 {
|
|
linux,mtd-name= "micron,mt29c4g96maz";
|
|
reg = <0 0 0>;
|
|
nand-bus-width = <16>;
|
|
ti,nand-ecc-opt = "bch8";
|
|
|
|
gpmc,sync-clk-ps = <0>;
|
|
gpmc,cs-on-ns = <0>;
|
|
gpmc,cs-rd-off-ns = <44>;
|
|
gpmc,cs-wr-off-ns = <44>;
|
|
gpmc,adv-on-ns = <6>;
|
|
gpmc,adv-rd-off-ns = <34>;
|
|
gpmc,adv-wr-off-ns = <44>;
|
|
gpmc,we-off-ns = <40>;
|
|
gpmc,oe-off-ns = <54>;
|
|
gpmc,access-ns = <64>;
|
|
gpmc,rd-cycle-ns = <82>;
|
|
gpmc,wr-cycle-ns = <82>;
|
|
gpmc,wr-access-ns = <40>;
|
|
gpmc,wr-data-mux-bus-ns = <0>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "SPL";
|
|
reg = <0 0x100000>;
|
|
};
|
|
partition@80000 {
|
|
label = "U-Boot";
|
|
reg = <0x100000 0x180000>;
|
|
};
|
|
partition@1c0000 {
|
|
label = "Environment";
|
|
reg = <0x280000 0x100000>;
|
|
};
|
|
partition@280000 {
|
|
label = "Kernel";
|
|
reg = <0x380000 0x300000>;
|
|
};
|
|
partition@780000 {
|
|
label = "Filesystem";
|
|
reg = <0x680000 0x1f980000>;
|
|
};
|
|
};
|
|
|
|
ethernet@gpmc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&smsc911x_pins>;
|
|
reg = <5 0 0xff>;
|
|
interrupt-parent = <&gpio6>;
|
|
interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
|
|
};
|
|
};
|
|
|
|
&usbhshost {
|
|
port1-mode = "ehci-phy";
|
|
};
|
|
|
|
&usbhsehci {
|
|
phys = <&hsusb1_phy>;
|
|
};
|
|
|
|
&vpll2 {
|
|
/* Needed for DSS */
|
|
regulator-name = "vdds_dsi";
|
|
};
|