linux/drivers/usb/musb/mpfs.c
Conor Dooley 2bc33d79fc usb: musb: mpfs: detect UPLI external vbus control requirement from DT
The musb driver core already supports external vbus control for ULPI
PHYs, but none of the drivers actually enable it. A customer reported
needing this for their device, and now that a DT property for detecting
this configuration exists, read the property to enable the feature.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240531-spilt-garage-ed2113d628e8@wendy
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-04 15:42:45 +02:00

271 lines
6.7 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* PolarFire SoC (MPFS) MUSB Glue Layer
*
* Copyright (c) 2020-2022 Microchip Corporation. All rights reserved.
* Based on {omap2430,tusb6010,ux500}.c
*
*/
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/usb/usb_phy_generic.h>
#include "musb_core.h"
#include "musb_dma.h"
#define MPFS_MUSB_MAX_EP_NUM 8
#define MPFS_MUSB_RAM_BITS 12
struct mpfs_glue {
struct device *dev;
struct platform_device *musb;
struct platform_device *phy;
struct clk *clk;
};
static struct musb_fifo_cfg mpfs_musb_mode_cfg[] = {
{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 1024, },
{ .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 4096, },
};
static const struct musb_hdrc_config mpfs_musb_hdrc_config = {
.fifo_cfg = mpfs_musb_mode_cfg,
.fifo_cfg_size = ARRAY_SIZE(mpfs_musb_mode_cfg),
.multipoint = true,
.dyn_fifo = true,
.num_eps = MPFS_MUSB_MAX_EP_NUM,
.ram_bits = MPFS_MUSB_RAM_BITS,
};
static irqreturn_t mpfs_musb_interrupt(int irq, void *__hci)
{
unsigned long flags;
irqreturn_t ret = IRQ_NONE;
struct musb *musb = __hci;
spin_lock_irqsave(&musb->lock, flags);
musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
if (musb->int_usb || musb->int_tx || musb->int_rx) {
musb_writeb(musb->mregs, MUSB_INTRUSB, musb->int_usb);
musb_writew(musb->mregs, MUSB_INTRTX, musb->int_tx);
musb_writew(musb->mregs, MUSB_INTRRX, musb->int_rx);
ret = musb_interrupt(musb);
}
spin_unlock_irqrestore(&musb->lock, flags);
return ret;
}
static void mpfs_musb_set_vbus(struct musb *musb, int is_on)
{
u8 devctl;
/*
* HDRC controls CPEN, but beware current surges during device
* connect. They can trigger transient overcurrent conditions
* that must be ignored.
*/
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
if (is_on) {
musb->is_active = 1;
musb->xceiv->otg->default_a = 1;
musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
devctl |= MUSB_DEVCTL_SESSION;
MUSB_HST_MODE(musb);
} else {
musb->is_active = 0;
/*
* NOTE: skipping A_WAIT_VFALL -> A_IDLE and
* jumping right to B_IDLE...
*/
musb->xceiv->otg->default_a = 0;
musb->xceiv->otg->state = OTG_STATE_B_IDLE;
devctl &= ~MUSB_DEVCTL_SESSION;
MUSB_DEV_MODE(musb);
}
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
dev_dbg(musb->controller, "VBUS %s, devctl %02x\n",
usb_otg_state_string(musb->xceiv->otg->state),
musb_readb(musb->mregs, MUSB_DEVCTL));
}
static int mpfs_musb_init(struct musb *musb)
{
struct device *dev = musb->controller;
musb->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
if (IS_ERR(musb->xceiv)) {
dev_err(dev, "HS UDC: no transceiver configured\n");
return PTR_ERR(musb->xceiv);
}
musb->dyn_fifo = true;
musb->isr = mpfs_musb_interrupt;
musb_platform_set_vbus(musb, 1);
return 0;
}
static const struct musb_platform_ops mpfs_ops = {
.quirks = MUSB_DMA_INVENTRA,
.init = mpfs_musb_init,
.fifo_mode = 2,
#ifdef CONFIG_USB_INVENTRA_DMA
.dma_init = musbhs_dma_controller_create,
.dma_exit = musbhs_dma_controller_destroy,
#endif
.set_vbus = mpfs_musb_set_vbus
};
static int mpfs_probe(struct platform_device *pdev)
{
struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct mpfs_glue *glue;
struct platform_device *musb_pdev;
struct device *dev = &pdev->dev;
struct clk *clk;
int ret;
glue = devm_kzalloc(dev, sizeof(*glue), GFP_KERNEL);
if (!glue)
return -ENOMEM;
musb_pdev = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
if (!musb_pdev) {
dev_err(dev, "failed to allocate musb device\n");
return -ENOMEM;
}
clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(clk)) {
dev_err(&pdev->dev, "failed to get clock\n");
ret = PTR_ERR(clk);
goto err_phy_release;
}
ret = clk_prepare_enable(clk);
if (ret) {
dev_err(&pdev->dev, "failed to enable clock\n");
goto err_phy_release;
}
musb_pdev->dev.parent = dev;
musb_pdev->dev.coherent_dma_mask = DMA_BIT_MASK(39);
musb_pdev->dev.dma_mask = &musb_pdev->dev.coherent_dma_mask;
device_set_of_node_from_dev(&musb_pdev->dev, dev);
glue->dev = dev;
glue->musb = musb_pdev;
glue->clk = clk;
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata) {
ret = -ENOMEM;
goto err_clk_disable;
}
pdata->config = &mpfs_musb_hdrc_config;
pdata->platform_ops = &mpfs_ops;
pdata->extvbus = device_property_read_bool(dev, "microchip,ext-vbus-drv");
pdata->mode = usb_get_dr_mode(dev);
if (pdata->mode == USB_DR_MODE_UNKNOWN) {
dev_info(dev, "No dr_mode property found, defaulting to otg\n");
pdata->mode = USB_DR_MODE_OTG;
}
glue->phy = usb_phy_generic_register();
if (IS_ERR(glue->phy)) {
dev_err(dev, "failed to register usb-phy %ld\n",
PTR_ERR(glue->phy));
ret = PTR_ERR(glue->phy);
goto err_clk_disable;
}
platform_set_drvdata(pdev, glue);
ret = platform_device_add_resources(musb_pdev, pdev->resource, pdev->num_resources);
if (ret) {
dev_err(dev, "failed to add resources\n");
goto err_clk_disable;
}
ret = platform_device_add_data(musb_pdev, pdata, sizeof(*pdata));
if (ret) {
dev_err(dev, "failed to add platform_data\n");
goto err_clk_disable;
}
ret = platform_device_add(musb_pdev);
if (ret) {
dev_err(dev, "failed to register musb device\n");
goto err_clk_disable;
}
dev_info(&pdev->dev, "Registered MPFS MUSB driver\n");
return 0;
err_clk_disable:
clk_disable_unprepare(clk);
err_phy_release:
usb_phy_generic_unregister(glue->phy);
platform_device_put(musb_pdev);
return ret;
}
static void mpfs_remove(struct platform_device *pdev)
{
struct mpfs_glue *glue = platform_get_drvdata(pdev);
clk_disable_unprepare(glue->clk);
platform_device_unregister(glue->musb);
usb_phy_generic_unregister(pdev);
}
#ifdef CONFIG_OF
static const struct of_device_id mpfs_id_table[] = {
{ .compatible = "microchip,mpfs-musb" },
{ }
};
MODULE_DEVICE_TABLE(of, mpfs_id_table);
#endif
static struct platform_driver mpfs_musb_driver = {
.probe = mpfs_probe,
.remove_new = mpfs_remove,
.driver = {
.name = "mpfs-musb",
.of_match_table = of_match_ptr(mpfs_id_table)
},
};
module_platform_driver(mpfs_musb_driver);
MODULE_DESCRIPTION("PolarFire SoC MUSB Glue Layer");
MODULE_LICENSE("GPL");