linux/drivers/thermal/qcom/tsens-v2.c
Eduardo Valentin ca657468a0 Revert "drivers: thermal: tsens: Add new operation to check if a sensor is enabled"
This reverts commit 3e6a8fb330.

Cc: Andy Gross <agross@kernel.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Amit Kucheria <amit.kucheria@linaro.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Suggested-by: Amit Kucheria <amit.kucheria@linaro.org>
Reported-by: Andy Gross <andygro@gmail.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-28 19:30:33 -07:00

84 lines
2.5 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
* Copyright (c) 2018, Linaro Limited
*/
#include <linux/bitops.h>
#include <linux/regmap.h>
#include "tsens.h"
/* ----- SROT ------ */
#define SROT_HW_VER_OFF 0x0000
#define SROT_CTRL_OFF 0x0004
/* ----- TM ------ */
#define TM_INT_EN_OFF 0x0004
#define TM_UPPER_LOWER_INT_STATUS_OFF 0x0008
#define TM_UPPER_LOWER_INT_CLEAR_OFF 0x000c
#define TM_UPPER_LOWER_INT_MASK_OFF 0x0010
#define TM_CRITICAL_INT_STATUS_OFF 0x0014
#define TM_CRITICAL_INT_CLEAR_OFF 0x0018
#define TM_CRITICAL_INT_MASK_OFF 0x001c
#define TM_Sn_UPPER_LOWER_THRESHOLD_OFF 0x0020
#define TM_Sn_CRITICAL_THRESHOLD_OFF 0x0060
#define TM_Sn_STATUS_OFF 0x00a0
#define TM_TRDY_OFF 0x00e4
/* v2.x: 8996, 8998, sdm845 */
static const struct tsens_features tsens_v2_feat = {
.ver_major = VER_2_X,
.crit_int = 1,
.adc = 0,
.srot_split = 1,
.max_sensors = 16,
};
static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = {
/* ----- SROT ------ */
/* VERSION */
[VER_MAJOR] = REG_FIELD(SROT_HW_VER_OFF, 28, 31),
[VER_MINOR] = REG_FIELD(SROT_HW_VER_OFF, 16, 27),
[VER_STEP] = REG_FIELD(SROT_HW_VER_OFF, 0, 15),
/* CTRL_OFF */
[TSENS_EN] = REG_FIELD(SROT_CTRL_OFF, 0, 0),
[TSENS_SW_RST] = REG_FIELD(SROT_CTRL_OFF, 1, 1),
/* ----- TM ------ */
/* INTERRUPT ENABLE */
/* v2 has separate enables for UPPER/LOWER/CRITICAL interrupts */
[INT_EN] = REG_FIELD(TM_INT_EN_OFF, 0, 2),
/* Sn_STATUS */
REG_FIELD_FOR_EACH_SENSOR16(LAST_TEMP, TM_Sn_STATUS_OFF, 0, 11),
REG_FIELD_FOR_EACH_SENSOR16(VALID, TM_Sn_STATUS_OFF, 21, 21),
REG_FIELD_FOR_EACH_SENSOR16(MIN_STATUS, TM_Sn_STATUS_OFF, 16, 16),
REG_FIELD_FOR_EACH_SENSOR16(LOWER_STATUS, TM_Sn_STATUS_OFF, 17, 17),
REG_FIELD_FOR_EACH_SENSOR16(UPPER_STATUS, TM_Sn_STATUS_OFF, 18, 18),
REG_FIELD_FOR_EACH_SENSOR16(CRITICAL_STATUS, TM_Sn_STATUS_OFF, 19, 19),
REG_FIELD_FOR_EACH_SENSOR16(MAX_STATUS, TM_Sn_STATUS_OFF, 20, 20),
/* TRDY: 1=ready, 0=in progress */
[TRDY] = REG_FIELD(TM_TRDY_OFF, 0, 0),
};
static const struct tsens_ops ops_generic_v2 = {
.init = init_common,
.get_temp = get_temp_tsens_valid,
};
const struct tsens_plat_data data_tsens_v2 = {
.ops = &ops_generic_v2,
.feat = &tsens_v2_feat,
.fields = tsens_v2_regfields,
};
/* Kept around for backward compatibility with old msm8996.dtsi */
const struct tsens_plat_data data_8996 = {
.num_sensors = 13,
.ops = &ops_generic_v2,
.feat = &tsens_v2_feat,
.fields = tsens_v2_regfields,
};