mirror of
https://github.com/torvalds/linux.git
synced 2024-12-24 11:51:27 +00:00
ae35496230
The ADC is typically shared with remote CPUs not running Linux. However, there is only one register to power-up/power-down. Remote CPUs aren't able to power-up the ADC, and rely in Linux doing it instead. This commit uses the adc-reserved-channels devicetree property to distinguish shared usage. In this case, the ADC is powered up at probe time. If the ADC is used only by the CPU running Linux, power-up/down at runtime, only when neeeded. Signed-off-by: Naidu Tellapati <naidu.tellapati@imgtec.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
448 lines
11 KiB
C
448 lines
11 KiB
C
/*
|
|
* Copyright (c) 2014-2015 Imagination Technologies Ltd.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published by
|
|
* the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/trigger.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
|
|
/* Registers */
|
|
#define CC10001_ADC_CONFIG 0x00
|
|
#define CC10001_ADC_START_CONV BIT(4)
|
|
#define CC10001_ADC_MODE_SINGLE_CONV BIT(5)
|
|
|
|
#define CC10001_ADC_DDATA_OUT 0x04
|
|
#define CC10001_ADC_EOC 0x08
|
|
#define CC10001_ADC_EOC_SET BIT(0)
|
|
|
|
#define CC10001_ADC_CHSEL_SAMPLED 0x0c
|
|
#define CC10001_ADC_POWER_DOWN 0x10
|
|
#define CC10001_ADC_POWER_DOWN_SET BIT(0)
|
|
|
|
#define CC10001_ADC_DEBUG 0x14
|
|
#define CC10001_ADC_DATA_COUNT 0x20
|
|
|
|
#define CC10001_ADC_DATA_MASK GENMASK(9, 0)
|
|
#define CC10001_ADC_NUM_CHANNELS 8
|
|
#define CC10001_ADC_CH_MASK GENMASK(2, 0)
|
|
|
|
#define CC10001_INVALID_SAMPLED 0xffff
|
|
#define CC10001_MAX_POLL_COUNT 20
|
|
|
|
/*
|
|
* As per device specification, wait six clock cycles after power-up to
|
|
* activate START. Since adding two more clock cycles delay does not
|
|
* impact the performance too much, we are adding two additional cycles delay
|
|
* intentionally here.
|
|
*/
|
|
#define CC10001_WAIT_CYCLES 8
|
|
|
|
struct cc10001_adc_device {
|
|
void __iomem *reg_base;
|
|
struct clk *adc_clk;
|
|
struct regulator *reg;
|
|
u16 *buf;
|
|
|
|
bool shared;
|
|
struct mutex lock;
|
|
unsigned int start_delay_ns;
|
|
unsigned int eoc_delay_ns;
|
|
};
|
|
|
|
static inline void cc10001_adc_write_reg(struct cc10001_adc_device *adc_dev,
|
|
u32 reg, u32 val)
|
|
{
|
|
writel(val, adc_dev->reg_base + reg);
|
|
}
|
|
|
|
static inline u32 cc10001_adc_read_reg(struct cc10001_adc_device *adc_dev,
|
|
u32 reg)
|
|
{
|
|
return readl(adc_dev->reg_base + reg);
|
|
}
|
|
|
|
static void cc10001_adc_power_up(struct cc10001_adc_device *adc_dev)
|
|
{
|
|
cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_DOWN, 0);
|
|
ndelay(adc_dev->start_delay_ns);
|
|
}
|
|
|
|
static void cc10001_adc_power_down(struct cc10001_adc_device *adc_dev)
|
|
{
|
|
cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_DOWN,
|
|
CC10001_ADC_POWER_DOWN_SET);
|
|
}
|
|
|
|
static void cc10001_adc_start(struct cc10001_adc_device *adc_dev,
|
|
unsigned int channel)
|
|
{
|
|
u32 val;
|
|
|
|
/* Channel selection and mode of operation */
|
|
val = (channel & CC10001_ADC_CH_MASK) | CC10001_ADC_MODE_SINGLE_CONV;
|
|
cc10001_adc_write_reg(adc_dev, CC10001_ADC_CONFIG, val);
|
|
|
|
udelay(1);
|
|
val = cc10001_adc_read_reg(adc_dev, CC10001_ADC_CONFIG);
|
|
val = val | CC10001_ADC_START_CONV;
|
|
cc10001_adc_write_reg(adc_dev, CC10001_ADC_CONFIG, val);
|
|
}
|
|
|
|
static u16 cc10001_adc_poll_done(struct iio_dev *indio_dev,
|
|
unsigned int channel,
|
|
unsigned int delay)
|
|
{
|
|
struct cc10001_adc_device *adc_dev = iio_priv(indio_dev);
|
|
unsigned int poll_count = 0;
|
|
|
|
while (!(cc10001_adc_read_reg(adc_dev, CC10001_ADC_EOC) &
|
|
CC10001_ADC_EOC_SET)) {
|
|
|
|
ndelay(delay);
|
|
if (poll_count++ == CC10001_MAX_POLL_COUNT)
|
|
return CC10001_INVALID_SAMPLED;
|
|
}
|
|
|
|
poll_count = 0;
|
|
while ((cc10001_adc_read_reg(adc_dev, CC10001_ADC_CHSEL_SAMPLED) &
|
|
CC10001_ADC_CH_MASK) != channel) {
|
|
|
|
ndelay(delay);
|
|
if (poll_count++ == CC10001_MAX_POLL_COUNT)
|
|
return CC10001_INVALID_SAMPLED;
|
|
}
|
|
|
|
/* Read the 10 bit output register */
|
|
return cc10001_adc_read_reg(adc_dev, CC10001_ADC_DDATA_OUT) &
|
|
CC10001_ADC_DATA_MASK;
|
|
}
|
|
|
|
static irqreturn_t cc10001_adc_trigger_h(int irq, void *p)
|
|
{
|
|
struct cc10001_adc_device *adc_dev;
|
|
struct iio_poll_func *pf = p;
|
|
struct iio_dev *indio_dev;
|
|
unsigned int delay_ns;
|
|
unsigned int channel;
|
|
unsigned int scan_idx;
|
|
bool sample_invalid;
|
|
u16 *data;
|
|
int i;
|
|
|
|
indio_dev = pf->indio_dev;
|
|
adc_dev = iio_priv(indio_dev);
|
|
data = adc_dev->buf;
|
|
|
|
mutex_lock(&adc_dev->lock);
|
|
|
|
if (!adc_dev->shared)
|
|
cc10001_adc_power_up(adc_dev);
|
|
|
|
/* Calculate delay step for eoc and sampled data */
|
|
delay_ns = adc_dev->eoc_delay_ns / CC10001_MAX_POLL_COUNT;
|
|
|
|
i = 0;
|
|
sample_invalid = false;
|
|
for_each_set_bit(scan_idx, indio_dev->active_scan_mask,
|
|
indio_dev->masklength) {
|
|
|
|
channel = indio_dev->channels[scan_idx].channel;
|
|
cc10001_adc_start(adc_dev, channel);
|
|
|
|
data[i] = cc10001_adc_poll_done(indio_dev, channel, delay_ns);
|
|
if (data[i] == CC10001_INVALID_SAMPLED) {
|
|
dev_warn(&indio_dev->dev,
|
|
"invalid sample on channel %d\n", channel);
|
|
sample_invalid = true;
|
|
goto done;
|
|
}
|
|
i++;
|
|
}
|
|
|
|
done:
|
|
if (!adc_dev->shared)
|
|
cc10001_adc_power_down(adc_dev);
|
|
|
|
mutex_unlock(&adc_dev->lock);
|
|
|
|
if (!sample_invalid)
|
|
iio_push_to_buffers_with_timestamp(indio_dev, data,
|
|
iio_get_time_ns());
|
|
iio_trigger_notify_done(indio_dev->trig);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static u16 cc10001_adc_read_raw_voltage(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan)
|
|
{
|
|
struct cc10001_adc_device *adc_dev = iio_priv(indio_dev);
|
|
unsigned int delay_ns;
|
|
u16 val;
|
|
|
|
if (!adc_dev->shared)
|
|
cc10001_adc_power_up(adc_dev);
|
|
|
|
/* Calculate delay step for eoc and sampled data */
|
|
delay_ns = adc_dev->eoc_delay_ns / CC10001_MAX_POLL_COUNT;
|
|
|
|
cc10001_adc_start(adc_dev, chan->channel);
|
|
|
|
val = cc10001_adc_poll_done(indio_dev, chan->channel, delay_ns);
|
|
|
|
if (!adc_dev->shared)
|
|
cc10001_adc_power_down(adc_dev);
|
|
|
|
return val;
|
|
}
|
|
|
|
static int cc10001_adc_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
struct cc10001_adc_device *adc_dev = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
if (iio_buffer_enabled(indio_dev))
|
|
return -EBUSY;
|
|
mutex_lock(&adc_dev->lock);
|
|
*val = cc10001_adc_read_raw_voltage(indio_dev, chan);
|
|
mutex_unlock(&adc_dev->lock);
|
|
|
|
if (*val == CC10001_INVALID_SAMPLED)
|
|
return -EIO;
|
|
return IIO_VAL_INT;
|
|
|
|
case IIO_CHAN_INFO_SCALE:
|
|
ret = regulator_get_voltage(adc_dev->reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*val = ret / 1000;
|
|
*val2 = chan->scan_type.realbits;
|
|
return IIO_VAL_FRACTIONAL_LOG2;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int cc10001_update_scan_mode(struct iio_dev *indio_dev,
|
|
const unsigned long *scan_mask)
|
|
{
|
|
struct cc10001_adc_device *adc_dev = iio_priv(indio_dev);
|
|
|
|
kfree(adc_dev->buf);
|
|
adc_dev->buf = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
|
|
if (!adc_dev->buf)
|
|
return -ENOMEM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct iio_info cc10001_adc_info = {
|
|
.driver_module = THIS_MODULE,
|
|
.read_raw = &cc10001_adc_read_raw,
|
|
.update_scan_mode = &cc10001_update_scan_mode,
|
|
};
|
|
|
|
static int cc10001_adc_channel_init(struct iio_dev *indio_dev,
|
|
unsigned long channel_map)
|
|
{
|
|
struct iio_chan_spec *chan_array, *timestamp;
|
|
unsigned int bit, idx = 0;
|
|
|
|
indio_dev->num_channels = bitmap_weight(&channel_map,
|
|
CC10001_ADC_NUM_CHANNELS) + 1;
|
|
|
|
chan_array = devm_kcalloc(&indio_dev->dev, indio_dev->num_channels,
|
|
sizeof(struct iio_chan_spec),
|
|
GFP_KERNEL);
|
|
if (!chan_array)
|
|
return -ENOMEM;
|
|
|
|
for_each_set_bit(bit, &channel_map, CC10001_ADC_NUM_CHANNELS) {
|
|
struct iio_chan_spec *chan = &chan_array[idx];
|
|
|
|
chan->type = IIO_VOLTAGE;
|
|
chan->indexed = 1;
|
|
chan->channel = bit;
|
|
chan->scan_index = idx;
|
|
chan->scan_type.sign = 'u';
|
|
chan->scan_type.realbits = 10;
|
|
chan->scan_type.storagebits = 16;
|
|
chan->info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE);
|
|
chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
|
|
idx++;
|
|
}
|
|
|
|
timestamp = &chan_array[idx];
|
|
timestamp->type = IIO_TIMESTAMP;
|
|
timestamp->channel = -1;
|
|
timestamp->scan_index = idx;
|
|
timestamp->scan_type.sign = 's';
|
|
timestamp->scan_type.realbits = 64;
|
|
timestamp->scan_type.storagebits = 64;
|
|
|
|
indio_dev->channels = chan_array;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cc10001_adc_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *node = pdev->dev.of_node;
|
|
struct cc10001_adc_device *adc_dev;
|
|
unsigned long adc_clk_rate;
|
|
struct resource *res;
|
|
struct iio_dev *indio_dev;
|
|
unsigned long channel_map;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc_dev));
|
|
if (indio_dev == NULL)
|
|
return -ENOMEM;
|
|
|
|
adc_dev = iio_priv(indio_dev);
|
|
|
|
channel_map = GENMASK(CC10001_ADC_NUM_CHANNELS - 1, 0);
|
|
if (!of_property_read_u32(node, "adc-reserved-channels", &ret)) {
|
|
adc_dev->shared = true;
|
|
channel_map &= ~ret;
|
|
}
|
|
|
|
adc_dev->reg = devm_regulator_get(&pdev->dev, "vref");
|
|
if (IS_ERR(adc_dev->reg))
|
|
return PTR_ERR(adc_dev->reg);
|
|
|
|
ret = regulator_enable(adc_dev->reg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
indio_dev->dev.parent = &pdev->dev;
|
|
indio_dev->name = dev_name(&pdev->dev);
|
|
indio_dev->info = &cc10001_adc_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
adc_dev->reg_base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(adc_dev->reg_base)) {
|
|
ret = PTR_ERR(adc_dev->reg_base);
|
|
goto err_disable_reg;
|
|
}
|
|
|
|
adc_dev->adc_clk = devm_clk_get(&pdev->dev, "adc");
|
|
if (IS_ERR(adc_dev->adc_clk)) {
|
|
dev_err(&pdev->dev, "failed to get the clock\n");
|
|
ret = PTR_ERR(adc_dev->adc_clk);
|
|
goto err_disable_reg;
|
|
}
|
|
|
|
ret = clk_prepare_enable(adc_dev->adc_clk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to enable the clock\n");
|
|
goto err_disable_reg;
|
|
}
|
|
|
|
adc_clk_rate = clk_get_rate(adc_dev->adc_clk);
|
|
if (!adc_clk_rate) {
|
|
ret = -EINVAL;
|
|
dev_err(&pdev->dev, "null clock rate!\n");
|
|
goto err_disable_clk;
|
|
}
|
|
|
|
adc_dev->eoc_delay_ns = NSEC_PER_SEC / adc_clk_rate;
|
|
adc_dev->start_delay_ns = adc_dev->eoc_delay_ns * CC10001_WAIT_CYCLES;
|
|
|
|
/*
|
|
* There is only one register to power-up/power-down the AUX ADC.
|
|
* If the ADC is shared among multiple CPUs, always power it up here.
|
|
* If the ADC is used only by the MIPS, power-up/power-down at runtime.
|
|
*/
|
|
if (adc_dev->shared)
|
|
cc10001_adc_power_up(adc_dev);
|
|
|
|
/* Setup the ADC channels available on the device */
|
|
ret = cc10001_adc_channel_init(indio_dev, channel_map);
|
|
if (ret < 0)
|
|
goto err_disable_clk;
|
|
|
|
mutex_init(&adc_dev->lock);
|
|
|
|
ret = iio_triggered_buffer_setup(indio_dev, NULL,
|
|
&cc10001_adc_trigger_h, NULL);
|
|
if (ret < 0)
|
|
goto err_disable_clk;
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret < 0)
|
|
goto err_cleanup_buffer;
|
|
|
|
platform_set_drvdata(pdev, indio_dev);
|
|
|
|
return 0;
|
|
|
|
err_cleanup_buffer:
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
err_disable_clk:
|
|
clk_disable_unprepare(adc_dev->adc_clk);
|
|
err_disable_reg:
|
|
regulator_disable(adc_dev->reg);
|
|
return ret;
|
|
}
|
|
|
|
static int cc10001_adc_remove(struct platform_device *pdev)
|
|
{
|
|
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
|
|
struct cc10001_adc_device *adc_dev = iio_priv(indio_dev);
|
|
|
|
cc10001_adc_power_down(adc_dev);
|
|
iio_device_unregister(indio_dev);
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
clk_disable_unprepare(adc_dev->adc_clk);
|
|
regulator_disable(adc_dev->reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id cc10001_adc_dt_ids[] = {
|
|
{ .compatible = "cosmic,10001-adc", },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, cc10001_adc_dt_ids);
|
|
|
|
static struct platform_driver cc10001_adc_driver = {
|
|
.driver = {
|
|
.name = "cc10001-adc",
|
|
.of_match_table = cc10001_adc_dt_ids,
|
|
},
|
|
.probe = cc10001_adc_probe,
|
|
.remove = cc10001_adc_remove,
|
|
};
|
|
module_platform_driver(cc10001_adc_driver);
|
|
|
|
MODULE_AUTHOR("Phani Movva <Phani.Movva@imgtec.com>");
|
|
MODULE_DESCRIPTION("Cosmic Circuits ADC driver");
|
|
MODULE_LICENSE("GPL v2");
|