mirror of
https://github.com/torvalds/linux.git
synced 2024-12-27 21:33:00 +00:00
c910d6ad2f
This patch adds the device tree bindings for the Spreadtrum GPIO controller. The gpios will be supported by the GPIO generic library. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
29 lines
1.1 KiB
Plaintext
29 lines
1.1 KiB
Plaintext
Spreadtrum GPIO controller bindings
|
|
|
|
The controller's registers are organized as sets of sixteen 16-bit
|
|
registers with each set controlling a bank of up to 16 pins. A single
|
|
interrupt is shared for all of the banks handled by the controller.
|
|
|
|
Required properties:
|
|
- compatible: Should be "sprd,sc9860-gpio".
|
|
- reg: Define the base and range of the I/O address space containing
|
|
the GPIO controller registers.
|
|
- gpio-controller: Marks the device node as a GPIO controller.
|
|
- #gpio-cells: Should be <2>. The first cell is the gpio number and
|
|
the second cell is used to specify optional parameters.
|
|
- interrupt-controller: Marks the device node as an interrupt controller.
|
|
- #interrupt-cells: Should be <2>. Specifies the number of cells needed
|
|
to encode interrupt source.
|
|
- interrupts: Should be the port interrupt shared by all the gpios.
|
|
|
|
Example:
|
|
ap_gpio: gpio@40280000 {
|
|
compatible = "sprd,sc9860-gpio";
|
|
reg = <0 0x40280000 0 0x1000>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|