mirror of
https://github.com/torvalds/linux.git
synced 2024-12-22 19:01:37 +00:00
115e1adca3
DTS updates that fix booting problems on mpc5200-based boards: - change to ethernet reg property - addition of mdio and phy nodes - removal of pci node (Motion-Pro board) Other DTS updates: - update i2c device tree nodes - add lpb bus node and flash device (without partitions defined) - add rtc i2c nodes Signed-off-by: Marian Balakowicz <m8@semihalf.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
309 lines
7.4 KiB
Plaintext
309 lines
7.4 KiB
Plaintext
/*
|
|
* Motion-PRO board Device Tree Source
|
|
*
|
|
* Copyright (C) 2007 Semihalf
|
|
* Marian Balakowicz <m8@semihalf.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
/ {
|
|
model = "promess,motionpro";
|
|
compatible = "promess,motionpro";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
PowerPC,5200@0 {
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
d-cache-line-size = <20>;
|
|
i-cache-line-size = <20>;
|
|
d-cache-size = <4000>; // L1, 16K
|
|
i-cache-size = <4000>; // L1, 16K
|
|
timebase-frequency = <0>; // from bootloader
|
|
bus-frequency = <0>; // from bootloader
|
|
clock-frequency = <0>; // from bootloader
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <00000000 04000000>; // 64MB
|
|
};
|
|
|
|
soc5200@f0000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc5200b-immr";
|
|
ranges = <0 f0000000 0000c000>;
|
|
reg = <f0000000 00000100>;
|
|
bus-frequency = <0>; // from bootloader
|
|
system-frequency = <0>; // from bootloader
|
|
|
|
cdm@200 {
|
|
compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
|
|
reg = <200 38>;
|
|
};
|
|
|
|
mpc5200_pic: interrupt-controller@500 {
|
|
// 5200 interrupts are encoded into two levels;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
|
|
reg = <500 80>;
|
|
};
|
|
|
|
timer@600 { // General Purpose Timer
|
|
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
|
reg = <600 10>;
|
|
interrupts = <1 9 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
fsl,has-wdt;
|
|
};
|
|
|
|
timer@610 { // General Purpose Timer
|
|
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
|
reg = <610 10>;
|
|
interrupts = <1 a 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
timer@620 { // General Purpose Timer
|
|
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
|
reg = <620 10>;
|
|
interrupts = <1 b 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
timer@630 { // General Purpose Timer
|
|
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
|
reg = <630 10>;
|
|
interrupts = <1 c 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
timer@640 { // General Purpose Timer
|
|
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
|
reg = <640 10>;
|
|
interrupts = <1 d 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
timer@650 { // General Purpose Timer
|
|
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
|
reg = <650 10>;
|
|
interrupts = <1 e 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
motionpro-led@660 { // Motion-PRO status LED
|
|
compatible = "promess,motionpro-led";
|
|
label = "motionpro-statusled";
|
|
reg = <660 10>;
|
|
interrupts = <1 f 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
blink-delay = <64>; // 100 msec
|
|
};
|
|
|
|
motionpro-led@670 { // Motion-PRO ready LED
|
|
compatible = "promess,motionpro-led";
|
|
label = "motionpro-readyled";
|
|
reg = <670 10>;
|
|
interrupts = <1 10 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
rtc@800 { // Real time clock
|
|
compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
|
|
reg = <800 100>;
|
|
interrupts = <1 5 0 1 6 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
mscan@980 {
|
|
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
|
|
interrupts = <2 12 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
reg = <980 80>;
|
|
};
|
|
|
|
gpio@b00 {
|
|
compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
|
|
reg = <b00 40>;
|
|
interrupts = <1 7 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
gpio@c00 {
|
|
compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
|
|
reg = <c00 40>;
|
|
interrupts = <1 8 0 0 3 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
spi@f00 {
|
|
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
|
|
reg = <f00 20>;
|
|
interrupts = <2 d 0 2 e 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
usb@1000 {
|
|
compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
|
|
reg = <1000 ff>;
|
|
interrupts = <2 6 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
dma-controller@1200 {
|
|
compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
|
|
reg = <1200 80>;
|
|
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
|
|
3 4 0 3 5 0 3 6 0 3 7 0
|
|
3 8 0 3 9 0 3 a 0 3 b 0
|
|
3 c 0 3 d 0 3 e 0 3 f 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
xlb@1f00 {
|
|
compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
|
|
reg = <1f00 100>;
|
|
};
|
|
|
|
serial@2000 { // PSC1
|
|
device_type = "serial";
|
|
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
|
|
port-number = <0>; // Logical port assignment
|
|
reg = <2000 100>;
|
|
interrupts = <2 1 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
// PSC2 in spi master mode
|
|
spi@2200 { // PSC2
|
|
compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
|
|
cell-index = <1>;
|
|
reg = <2200 100>;
|
|
interrupts = <2 2 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
// PSC5 in uart mode
|
|
serial@2800 { // PSC5
|
|
device_type = "serial";
|
|
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
|
|
port-number = <4>; // Logical port assignment
|
|
reg = <2800 100>;
|
|
interrupts = <2 c 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
ethernet@3000 {
|
|
device_type = "network";
|
|
compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
|
|
reg = <3000 400>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupts = <2 5 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
phy-handle = <&phy0>;
|
|
};
|
|
|
|
mdio@3000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
|
|
reg = <3000 400>; // fec range, since we need to setup fec interrupts
|
|
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
|
|
phy0: ethernet-phy@2 {
|
|
device_type = "ethernet-phy";
|
|
reg = <2>;
|
|
};
|
|
};
|
|
|
|
ata@3a00 {
|
|
compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
|
|
reg = <3a00 100>;
|
|
interrupts = <2 7 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
i2c@3d40 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
|
|
reg = <3d40 40>;
|
|
interrupts = <2 10 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
fsl5200-clocking;
|
|
|
|
rtc@68 {
|
|
device_type = "rtc";
|
|
compatible = "dallas,ds1339";
|
|
reg = <68>;
|
|
};
|
|
};
|
|
|
|
sram@8000 {
|
|
compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
|
|
reg = <8000 4000>;
|
|
};
|
|
};
|
|
|
|
lpb {
|
|
compatible = "fsl,lpb";
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0 ff000000 01000000
|
|
1 0 50000000 00010000
|
|
2 0 50010000 00010000
|
|
3 0 50020000 00010000>;
|
|
|
|
// 8-bit DualPort SRAM on LocalPlus Bus CS1
|
|
kollmorgen@1,0 {
|
|
compatible = "promess,motionpro-kollmorgen";
|
|
reg = <1 0 10000>;
|
|
interrupts = <1 1 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
// 8-bit board CPLD on LocalPlus Bus CS2
|
|
cpld@2,0 {
|
|
compatible = "promess,motionpro-cpld";
|
|
reg = <2 0 10000>;
|
|
};
|
|
|
|
// 8-bit custom Anybus Module on LocalPlus Bus CS3
|
|
anybus@3,0 {
|
|
compatible = "promess,motionpro-anybus";
|
|
reg = <3 0 10000>;
|
|
};
|
|
pro_module_general@3,0 {
|
|
compatible = "promess,pro_module_general";
|
|
reg = <3 0 3>;
|
|
};
|
|
pro_module_dio@3,800 {
|
|
compatible = "promess,pro_module_dio";
|
|
reg = <3 800 2>;
|
|
};
|
|
|
|
// 16-bit flash device at LocalPlus Bus CS0
|
|
flash@0,0 {
|
|
compatible = "cfi-flash";
|
|
reg = <0 0 01000000>;
|
|
bank-width = <2>;
|
|
device-width = <2>;
|
|
#size-cells = <1>;
|
|
#address-cells = <1>;
|
|
};
|
|
};
|
|
};
|