mirror of
https://github.com/torvalds/linux.git
synced 2024-12-26 04:42:12 +00:00
d8b58e0b53
Add documentation for Designware I2S hardware block. The block requires one clock (for audio sampling) and DMA channels for receive and transmit. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
32 lines
1.0 KiB
Plaintext
32 lines
1.0 KiB
Plaintext
DesignWare I2S controller
|
|
|
|
Required properties:
|
|
- compatible : Must be "snps,designware-i2s"
|
|
- reg : Must contain the I2S core's registers location and length
|
|
- clocks : Pairs of phandle and specifier referencing the controller's
|
|
clocks. The controller expects one clock: the clock used as the sampling
|
|
rate reference clock sample.
|
|
- clock-names : "i2sclk" for the sample rate reference clock.
|
|
- dmas: Pairs of phandle and specifier for the DMA channels that are used by
|
|
the core. The core expects one or two dma channels: one for transmit and
|
|
one for receive.
|
|
- dma-names : "tx" for the transmit channel, "rx" for the receive channel.
|
|
|
|
For more details on the 'dma', 'dma-names', 'clock' and 'clock-names'
|
|
properties please check:
|
|
* resource-names.txt
|
|
* clock/clock-bindings.txt
|
|
* dma/dma.txt
|
|
|
|
Example:
|
|
|
|
soc_i2s: i2s@7ff90000 {
|
|
compatible = "snps,designware-i2s";
|
|
reg = <0x0 0x7ff90000 0x0 0x1000>;
|
|
clocks = <&scpi_i2sclk 0>;
|
|
clock-names = "i2sclk";
|
|
#sound-dai-cells = <0>;
|
|
dmas = <&dma0 5>;
|
|
dma-names = "tx";
|
|
};
|