linux/arch/arm/mach-exynos/pm.c
Pankaj Dubey 32b0aa9aae ARM: EXYNOS: Remove i2c sys configuration related code
As all these code has been moved into i2c driver, now we can
safely remove them from machine files.

CC: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-09 01:14:23 +09:00

180 lines
4.1 KiB
C

/*
* Copyright (c) 2011-2014 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS - Power Management support
*
* Based on arch/arm/mach-s3c2410/pm.c
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/suspend.h>
#include <linux/cpu_pm.h>
#include <linux/io.h>
#include <linux/err.h>
#include <asm/firmware.h>
#include <asm/smp_scu.h>
#include <asm/suspend.h>
#include <mach/map.h>
#include <plat/pm-common.h>
#include "common.h"
#include "exynos-pmu.h"
#include "regs-pmu.h"
static inline void __iomem *exynos_boot_vector_addr(void)
{
if (samsung_rev() == EXYNOS4210_REV_1_1)
return pmu_base_addr + S5P_INFORM7;
else if (samsung_rev() == EXYNOS4210_REV_1_0)
return sysram_base_addr + 0x24;
return pmu_base_addr + S5P_INFORM0;
}
static inline void __iomem *exynos_boot_vector_flag(void)
{
if (samsung_rev() == EXYNOS4210_REV_1_1)
return pmu_base_addr + S5P_INFORM6;
else if (samsung_rev() == EXYNOS4210_REV_1_0)
return sysram_base_addr + 0x20;
return pmu_base_addr + S5P_INFORM1;
}
#define S5P_CHECK_AFTR 0xFCBA0D10
/* For Cortex-A9 Diagnostic and Power control register */
static unsigned int save_arm_register[2];
void exynos_cpu_save_register(void)
{
unsigned long tmp;
/* Save Power control register */
asm ("mrc p15, 0, %0, c15, c0, 0"
: "=r" (tmp) : : "cc");
save_arm_register[0] = tmp;
/* Save Diagnostic register */
asm ("mrc p15, 0, %0, c15, c0, 1"
: "=r" (tmp) : : "cc");
save_arm_register[1] = tmp;
}
void exynos_cpu_restore_register(void)
{
unsigned long tmp;
/* Restore Power control register */
tmp = save_arm_register[0];
asm volatile ("mcr p15, 0, %0, c15, c0, 0"
: : "r" (tmp)
: "cc");
/* Restore Diagnostic register */
tmp = save_arm_register[1];
asm volatile ("mcr p15, 0, %0, c15, c0, 1"
: : "r" (tmp)
: "cc");
}
void exynos_pm_central_suspend(void)
{
unsigned long tmp;
/* Setting Central Sequence Register for power down mode */
tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
/* Setting SEQ_OPTION register */
pmu_raw_writel(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0,
S5P_CENTRAL_SEQ_OPTION);
}
int exynos_pm_central_resume(void)
{
unsigned long tmp;
/*
* If PMU failed while entering sleep mode, WFI will be
* ignored by PMU and then exiting cpu_do_idle().
* S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically
* in this situation.
*/
tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
tmp |= S5P_CENTRAL_LOWPWR_CFG;
pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
/* clear the wakeup state register */
pmu_raw_writel(0x0, S5P_WAKEUP_STAT);
/* No need to perform below restore code */
return -1;
}
return 0;
}
/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */
static void exynos_set_wakeupmask(long mask)
{
pmu_raw_writel(mask, S5P_WAKEUP_MASK);
}
static void exynos_cpu_set_boot_vector(long flags)
{
__raw_writel(virt_to_phys(exynos_cpu_resume),
exynos_boot_vector_addr());
__raw_writel(flags, exynos_boot_vector_flag());
}
static int exynos_aftr_finisher(unsigned long flags)
{
int ret;
exynos_set_wakeupmask(0x0000ff3e);
/* Set value of power down register for aftr mode */
exynos_sys_powerdown_conf(SYS_AFTR);
ret = call_firmware_op(do_idle, FW_DO_IDLE_AFTR);
if (ret == -ENOSYS) {
if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
exynos_cpu_save_register();
exynos_cpu_set_boot_vector(S5P_CHECK_AFTR);
cpu_do_idle();
}
return 1;
}
void exynos_enter_aftr(void)
{
cpu_pm_enter();
exynos_pm_central_suspend();
cpu_suspend(0, exynos_aftr_finisher);
if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
scu_enable(S5P_VA_SCU);
if (call_firmware_op(resume) == -ENOSYS)
exynos_cpu_restore_register();
}
exynos_pm_central_resume();
cpu_pm_exit();
}