mirror of
https://github.com/torvalds/linux.git
synced 2024-12-05 10:32:35 +00:00
74047eaa22
The extcon IRQ schedules a work item. IRQ is requested using devm while WQ is cancelld at remove(). This mixing of devm and manual unwinding has potential case where the WQ has been emptied (.remove() was ran) but devm unwinding of IRQ was not yet done. It may be possible the IRQ is triggered at this point scheduling new work item to the already flushed queue. According to the input documentation the input device allocated by devm_input_allocate_device() does not need to be explicitly unregistered. Use the new devm_work_autocancel() and remove the remove() to simplify the code. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/cbe8205eed8276f6e6db5003cfe51b8b0d4ac966.1623146580.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
1274 lines
36 KiB
C
1274 lines
36 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
//
|
|
// extcon-max77693.c - MAX77693 extcon driver to support MAX77693 MUIC
|
|
//
|
|
// Copyright (C) 2012 Samsung Electrnoics
|
|
// Chanwoo Choi <cw00.choi@samsung.com>
|
|
|
|
#include <linux/devm-helpers.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/input.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/err.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mfd/max77693.h>
|
|
#include <linux/mfd/max77693-common.h>
|
|
#include <linux/mfd/max77693-private.h>
|
|
#include <linux/extcon-provider.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/irqdomain.h>
|
|
|
|
#define DEV_NAME "max77693-muic"
|
|
#define DELAY_MS_DEFAULT 20000 /* unit: millisecond */
|
|
|
|
/*
|
|
* Default value of MAX77693 register to bring up MUIC device.
|
|
* If user don't set some initial value for MUIC device through platform data,
|
|
* extcon-max77693 driver use 'default_init_data' to bring up base operation
|
|
* of MAX77693 MUIC device.
|
|
*/
|
|
static struct max77693_reg_data default_init_data[] = {
|
|
{
|
|
/* STATUS2 - [3]ChgDetRun */
|
|
.addr = MAX77693_MUIC_REG_STATUS2,
|
|
.data = MAX77693_STATUS2_CHGDETRUN_MASK,
|
|
}, {
|
|
/* INTMASK1 - Unmask [3]ADC1KM,[0]ADCM */
|
|
.addr = MAX77693_MUIC_REG_INTMASK1,
|
|
.data = INTMASK1_ADC1K_MASK
|
|
| INTMASK1_ADC_MASK,
|
|
}, {
|
|
/* INTMASK2 - Unmask [0]ChgTypM */
|
|
.addr = MAX77693_MUIC_REG_INTMASK2,
|
|
.data = INTMASK2_CHGTYP_MASK,
|
|
}, {
|
|
/* INTMASK3 - Mask all of interrupts */
|
|
.addr = MAX77693_MUIC_REG_INTMASK3,
|
|
.data = 0x0,
|
|
}, {
|
|
/* CDETCTRL2 */
|
|
.addr = MAX77693_MUIC_REG_CDETCTRL2,
|
|
.data = CDETCTRL2_VIDRMEN_MASK
|
|
| CDETCTRL2_DXOVPEN_MASK,
|
|
},
|
|
};
|
|
|
|
enum max77693_muic_adc_debounce_time {
|
|
ADC_DEBOUNCE_TIME_5MS = 0,
|
|
ADC_DEBOUNCE_TIME_10MS,
|
|
ADC_DEBOUNCE_TIME_25MS,
|
|
ADC_DEBOUNCE_TIME_38_62MS,
|
|
};
|
|
|
|
struct max77693_muic_info {
|
|
struct device *dev;
|
|
struct max77693_dev *max77693;
|
|
struct extcon_dev *edev;
|
|
int prev_cable_type;
|
|
int prev_cable_type_gnd;
|
|
int prev_chg_type;
|
|
int prev_button_type;
|
|
u8 status[2];
|
|
|
|
int irq;
|
|
struct work_struct irq_work;
|
|
struct mutex mutex;
|
|
|
|
/*
|
|
* Use delayed workqueue to detect cable state and then
|
|
* notify cable state to notifiee/platform through uevent.
|
|
* After completing the booting of platform, the extcon provider
|
|
* driver should notify cable state to upper layer.
|
|
*/
|
|
struct delayed_work wq_detcable;
|
|
|
|
/* Button of dock device */
|
|
struct input_dev *dock;
|
|
|
|
/*
|
|
* Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
|
|
* h/w path of COMP2/COMN1 on CONTROL1 register.
|
|
*/
|
|
int path_usb;
|
|
int path_uart;
|
|
};
|
|
|
|
enum max77693_muic_cable_group {
|
|
MAX77693_CABLE_GROUP_ADC = 0,
|
|
MAX77693_CABLE_GROUP_ADC_GND,
|
|
MAX77693_CABLE_GROUP_CHG,
|
|
MAX77693_CABLE_GROUP_VBVOLT,
|
|
};
|
|
|
|
enum max77693_muic_charger_type {
|
|
MAX77693_CHARGER_TYPE_NONE = 0,
|
|
MAX77693_CHARGER_TYPE_USB,
|
|
MAX77693_CHARGER_TYPE_DOWNSTREAM_PORT,
|
|
MAX77693_CHARGER_TYPE_DEDICATED_CHG,
|
|
MAX77693_CHARGER_TYPE_APPLE_500MA,
|
|
MAX77693_CHARGER_TYPE_APPLE_1A_2A,
|
|
MAX77693_CHARGER_TYPE_DEAD_BATTERY = 7,
|
|
};
|
|
|
|
/**
|
|
* struct max77693_muic_irq
|
|
* @irq: the index of irq list of MUIC device.
|
|
* @name: the name of irq.
|
|
* @virq: the virtual irq to use irq domain
|
|
*/
|
|
struct max77693_muic_irq {
|
|
unsigned int irq;
|
|
const char *name;
|
|
unsigned int virq;
|
|
};
|
|
|
|
static struct max77693_muic_irq muic_irqs[] = {
|
|
{ MAX77693_MUIC_IRQ_INT1_ADC, "muic-ADC" },
|
|
{ MAX77693_MUIC_IRQ_INT1_ADC_LOW, "muic-ADCLOW" },
|
|
{ MAX77693_MUIC_IRQ_INT1_ADC_ERR, "muic-ADCError" },
|
|
{ MAX77693_MUIC_IRQ_INT1_ADC1K, "muic-ADC1K" },
|
|
{ MAX77693_MUIC_IRQ_INT2_CHGTYP, "muic-CHGTYP" },
|
|
{ MAX77693_MUIC_IRQ_INT2_CHGDETREUN, "muic-CHGDETREUN" },
|
|
{ MAX77693_MUIC_IRQ_INT2_DCDTMR, "muic-DCDTMR" },
|
|
{ MAX77693_MUIC_IRQ_INT2_DXOVP, "muic-DXOVP" },
|
|
{ MAX77693_MUIC_IRQ_INT2_VBVOLT, "muic-VBVOLT" },
|
|
{ MAX77693_MUIC_IRQ_INT2_VIDRM, "muic-VIDRM" },
|
|
{ MAX77693_MUIC_IRQ_INT3_EOC, "muic-EOC" },
|
|
{ MAX77693_MUIC_IRQ_INT3_CGMBC, "muic-CGMBC" },
|
|
{ MAX77693_MUIC_IRQ_INT3_OVP, "muic-OVP" },
|
|
{ MAX77693_MUIC_IRQ_INT3_MBCCHG_ERR, "muic-MBCCHG_ERR" },
|
|
{ MAX77693_MUIC_IRQ_INT3_CHG_ENABLED, "muic-CHG_ENABLED" },
|
|
{ MAX77693_MUIC_IRQ_INT3_BAT_DET, "muic-BAT_DET" },
|
|
};
|
|
|
|
/* Define supported accessory type */
|
|
enum max77693_muic_acc_type {
|
|
MAX77693_MUIC_ADC_GROUND = 0x0,
|
|
MAX77693_MUIC_ADC_SEND_END_BUTTON,
|
|
MAX77693_MUIC_ADC_REMOTE_S1_BUTTON,
|
|
MAX77693_MUIC_ADC_REMOTE_S2_BUTTON,
|
|
MAX77693_MUIC_ADC_REMOTE_S3_BUTTON,
|
|
MAX77693_MUIC_ADC_REMOTE_S4_BUTTON,
|
|
MAX77693_MUIC_ADC_REMOTE_S5_BUTTON,
|
|
MAX77693_MUIC_ADC_REMOTE_S6_BUTTON,
|
|
MAX77693_MUIC_ADC_REMOTE_S7_BUTTON,
|
|
MAX77693_MUIC_ADC_REMOTE_S8_BUTTON,
|
|
MAX77693_MUIC_ADC_REMOTE_S9_BUTTON,
|
|
MAX77693_MUIC_ADC_REMOTE_S10_BUTTON,
|
|
MAX77693_MUIC_ADC_REMOTE_S11_BUTTON,
|
|
MAX77693_MUIC_ADC_REMOTE_S12_BUTTON,
|
|
MAX77693_MUIC_ADC_RESERVED_ACC_1,
|
|
MAX77693_MUIC_ADC_RESERVED_ACC_2,
|
|
MAX77693_MUIC_ADC_RESERVED_ACC_3,
|
|
MAX77693_MUIC_ADC_RESERVED_ACC_4,
|
|
MAX77693_MUIC_ADC_RESERVED_ACC_5,
|
|
MAX77693_MUIC_ADC_CEA936_AUDIO,
|
|
MAX77693_MUIC_ADC_PHONE_POWERED_DEV,
|
|
MAX77693_MUIC_ADC_TTY_CONVERTER,
|
|
MAX77693_MUIC_ADC_UART_CABLE,
|
|
MAX77693_MUIC_ADC_CEA936A_TYPE1_CHG,
|
|
MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF,
|
|
MAX77693_MUIC_ADC_FACTORY_MODE_USB_ON,
|
|
MAX77693_MUIC_ADC_AV_CABLE_NOLOAD,
|
|
MAX77693_MUIC_ADC_CEA936A_TYPE2_CHG,
|
|
MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF,
|
|
MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON,
|
|
MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE,
|
|
MAX77693_MUIC_ADC_OPEN,
|
|
|
|
/*
|
|
* The below accessories have same ADC value so ADCLow and
|
|
* ADC1K bit is used to separate specific accessory.
|
|
*/
|
|
/* ADC|VBVolot|ADCLow|ADC1K| */
|
|
MAX77693_MUIC_GND_USB_HOST = 0x100, /* 0x0| 0| 0| 0| */
|
|
MAX77693_MUIC_GND_USB_HOST_VB = 0x104, /* 0x0| 1| 0| 0| */
|
|
MAX77693_MUIC_GND_AV_CABLE_LOAD = 0x102,/* 0x0| 0| 1| 0| */
|
|
MAX77693_MUIC_GND_MHL = 0x103, /* 0x0| 0| 1| 1| */
|
|
MAX77693_MUIC_GND_MHL_VB = 0x107, /* 0x0| 1| 1| 1| */
|
|
};
|
|
|
|
/*
|
|
* MAX77693 MUIC device support below list of accessories(external connector)
|
|
*/
|
|
static const unsigned int max77693_extcon_cable[] = {
|
|
EXTCON_USB,
|
|
EXTCON_USB_HOST,
|
|
EXTCON_CHG_USB_SDP,
|
|
EXTCON_CHG_USB_DCP,
|
|
EXTCON_CHG_USB_FAST,
|
|
EXTCON_CHG_USB_SLOW,
|
|
EXTCON_CHG_USB_CDP,
|
|
EXTCON_DISP_MHL,
|
|
EXTCON_JIG,
|
|
EXTCON_DOCK,
|
|
EXTCON_NONE,
|
|
};
|
|
|
|
/*
|
|
* max77693_muic_set_debounce_time - Set the debounce time of ADC
|
|
* @info: the instance including private data of max77693 MUIC
|
|
* @time: the debounce time of ADC
|
|
*/
|
|
static int max77693_muic_set_debounce_time(struct max77693_muic_info *info,
|
|
enum max77693_muic_adc_debounce_time time)
|
|
{
|
|
int ret;
|
|
|
|
switch (time) {
|
|
case ADC_DEBOUNCE_TIME_5MS:
|
|
case ADC_DEBOUNCE_TIME_10MS:
|
|
case ADC_DEBOUNCE_TIME_25MS:
|
|
case ADC_DEBOUNCE_TIME_38_62MS:
|
|
/*
|
|
* Don't touch BTLDset, JIGset when you want to change adc
|
|
* debounce time. If it writes other than 0 to BTLDset, JIGset
|
|
* muic device will be reset and loose current state.
|
|
*/
|
|
ret = regmap_write(info->max77693->regmap_muic,
|
|
MAX77693_MUIC_REG_CTRL3,
|
|
time << MAX77693_CONTROL3_ADCDBSET_SHIFT);
|
|
if (ret) {
|
|
dev_err(info->dev, "failed to set ADC debounce time\n");
|
|
return ret;
|
|
}
|
|
break;
|
|
default:
|
|
dev_err(info->dev, "invalid ADC debounce time\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
};
|
|
|
|
/*
|
|
* max77693_muic_set_path - Set hardware line according to attached cable
|
|
* @info: the instance including private data of max77693 MUIC
|
|
* @value: the path according to attached cable
|
|
* @attached: the state of cable (true:attached, false:detached)
|
|
*
|
|
* The max77693 MUIC device share outside H/W line among a varity of cables
|
|
* so, this function set internal path of H/W line according to the type of
|
|
* attached cable.
|
|
*/
|
|
static int max77693_muic_set_path(struct max77693_muic_info *info,
|
|
u8 val, bool attached)
|
|
{
|
|
int ret;
|
|
unsigned int ctrl1, ctrl2 = 0;
|
|
|
|
if (attached)
|
|
ctrl1 = val;
|
|
else
|
|
ctrl1 = MAX77693_CONTROL1_SW_OPEN;
|
|
|
|
ret = regmap_update_bits(info->max77693->regmap_muic,
|
|
MAX77693_MUIC_REG_CTRL1, COMP_SW_MASK, ctrl1);
|
|
if (ret < 0) {
|
|
dev_err(info->dev, "failed to update MUIC register\n");
|
|
return ret;
|
|
}
|
|
|
|
if (attached)
|
|
ctrl2 |= MAX77693_CONTROL2_CPEN_MASK; /* LowPwr=0, CPEn=1 */
|
|
else
|
|
ctrl2 |= MAX77693_CONTROL2_LOWPWR_MASK; /* LowPwr=1, CPEn=0 */
|
|
|
|
ret = regmap_update_bits(info->max77693->regmap_muic,
|
|
MAX77693_MUIC_REG_CTRL2,
|
|
MAX77693_CONTROL2_LOWPWR_MASK | MAX77693_CONTROL2_CPEN_MASK,
|
|
ctrl2);
|
|
if (ret < 0) {
|
|
dev_err(info->dev, "failed to update MUIC register\n");
|
|
return ret;
|
|
}
|
|
|
|
dev_info(info->dev,
|
|
"CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n",
|
|
ctrl1, ctrl2, attached ? "attached" : "detached");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* max77693_muic_get_cable_type - Return cable type and check cable state
|
|
* @info: the instance including private data of max77693 MUIC
|
|
* @group: the path according to attached cable
|
|
* @attached: store cable state and return
|
|
*
|
|
* This function check the cable state either attached or detached,
|
|
* and then divide precise type of cable according to cable group.
|
|
* - MAX77693_CABLE_GROUP_ADC
|
|
* - MAX77693_CABLE_GROUP_ADC_GND
|
|
* - MAX77693_CABLE_GROUP_CHG
|
|
* - MAX77693_CABLE_GROUP_VBVOLT
|
|
*/
|
|
static int max77693_muic_get_cable_type(struct max77693_muic_info *info,
|
|
enum max77693_muic_cable_group group, bool *attached)
|
|
{
|
|
int cable_type = 0;
|
|
int adc;
|
|
int adc1k;
|
|
int adclow;
|
|
int vbvolt;
|
|
int chg_type;
|
|
|
|
switch (group) {
|
|
case MAX77693_CABLE_GROUP_ADC:
|
|
/*
|
|
* Read ADC value to check cable type and decide cable state
|
|
* according to cable type
|
|
*/
|
|
adc = info->status[0] & MAX77693_STATUS1_ADC_MASK;
|
|
adc >>= MAX77693_STATUS1_ADC_SHIFT;
|
|
|
|
/*
|
|
* Check current cable state/cable type and store cable type
|
|
* (info->prev_cable_type) for handling cable when cable is
|
|
* detached.
|
|
*/
|
|
if (adc == MAX77693_MUIC_ADC_OPEN) {
|
|
*attached = false;
|
|
|
|
cable_type = info->prev_cable_type;
|
|
info->prev_cable_type = MAX77693_MUIC_ADC_OPEN;
|
|
} else {
|
|
*attached = true;
|
|
|
|
cable_type = info->prev_cable_type = adc;
|
|
}
|
|
break;
|
|
case MAX77693_CABLE_GROUP_ADC_GND:
|
|
/*
|
|
* Read ADC value to check cable type and decide cable state
|
|
* according to cable type
|
|
*/
|
|
adc = info->status[0] & MAX77693_STATUS1_ADC_MASK;
|
|
adc >>= MAX77693_STATUS1_ADC_SHIFT;
|
|
|
|
/*
|
|
* Check current cable state/cable type and store cable type
|
|
* (info->prev_cable_type/_gnd) for handling cable when cable
|
|
* is detached.
|
|
*/
|
|
if (adc == MAX77693_MUIC_ADC_OPEN) {
|
|
*attached = false;
|
|
|
|
cable_type = info->prev_cable_type_gnd;
|
|
info->prev_cable_type_gnd = MAX77693_MUIC_ADC_OPEN;
|
|
} else {
|
|
*attached = true;
|
|
|
|
adclow = info->status[0] & MAX77693_STATUS1_ADCLOW_MASK;
|
|
adclow >>= MAX77693_STATUS1_ADCLOW_SHIFT;
|
|
adc1k = info->status[0] & MAX77693_STATUS1_ADC1K_MASK;
|
|
adc1k >>= MAX77693_STATUS1_ADC1K_SHIFT;
|
|
|
|
vbvolt = info->status[1] & MAX77693_STATUS2_VBVOLT_MASK;
|
|
vbvolt >>= MAX77693_STATUS2_VBVOLT_SHIFT;
|
|
|
|
/**
|
|
* [0x1|VBVolt|ADCLow|ADC1K]
|
|
* [0x1| 0| 0| 0] USB_HOST
|
|
* [0x1| 1| 0| 0] USB_HSOT_VB
|
|
* [0x1| 0| 1| 0] Audio Video cable with load
|
|
* [0x1| 0| 1| 1] MHL without charging cable
|
|
* [0x1| 1| 1| 1] MHL with charging cable
|
|
*/
|
|
cable_type = ((0x1 << 8)
|
|
| (vbvolt << 2)
|
|
| (adclow << 1)
|
|
| adc1k);
|
|
|
|
info->prev_cable_type = adc;
|
|
info->prev_cable_type_gnd = cable_type;
|
|
}
|
|
|
|
break;
|
|
case MAX77693_CABLE_GROUP_CHG:
|
|
/*
|
|
* Read charger type to check cable type and decide cable state
|
|
* according to type of charger cable.
|
|
*/
|
|
chg_type = info->status[1] & MAX77693_STATUS2_CHGTYP_MASK;
|
|
chg_type >>= MAX77693_STATUS2_CHGTYP_SHIFT;
|
|
|
|
if (chg_type == MAX77693_CHARGER_TYPE_NONE) {
|
|
*attached = false;
|
|
|
|
cable_type = info->prev_chg_type;
|
|
info->prev_chg_type = MAX77693_CHARGER_TYPE_NONE;
|
|
} else {
|
|
*attached = true;
|
|
|
|
/*
|
|
* Check current cable state/cable type and store cable
|
|
* type(info->prev_chg_type) for handling cable when
|
|
* charger cable is detached.
|
|
*/
|
|
cable_type = info->prev_chg_type = chg_type;
|
|
}
|
|
|
|
break;
|
|
case MAX77693_CABLE_GROUP_VBVOLT:
|
|
/*
|
|
* Read ADC value to check cable type and decide cable state
|
|
* according to cable type
|
|
*/
|
|
adc = info->status[0] & MAX77693_STATUS1_ADC_MASK;
|
|
adc >>= MAX77693_STATUS1_ADC_SHIFT;
|
|
chg_type = info->status[1] & MAX77693_STATUS2_CHGTYP_MASK;
|
|
chg_type >>= MAX77693_STATUS2_CHGTYP_SHIFT;
|
|
|
|
if (adc == MAX77693_MUIC_ADC_OPEN
|
|
&& chg_type == MAX77693_CHARGER_TYPE_NONE)
|
|
*attached = false;
|
|
else
|
|
*attached = true;
|
|
|
|
/*
|
|
* Read vbvolt field, if vbvolt is 1,
|
|
* this cable is used for charging.
|
|
*/
|
|
vbvolt = info->status[1] & MAX77693_STATUS2_VBVOLT_MASK;
|
|
vbvolt >>= MAX77693_STATUS2_VBVOLT_SHIFT;
|
|
|
|
cable_type = vbvolt;
|
|
break;
|
|
default:
|
|
dev_err(info->dev, "Unknown cable group (%d)\n", group);
|
|
cable_type = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
return cable_type;
|
|
}
|
|
|
|
static int max77693_muic_dock_handler(struct max77693_muic_info *info,
|
|
int cable_type, bool attached)
|
|
{
|
|
int ret = 0;
|
|
int vbvolt;
|
|
bool cable_attached;
|
|
unsigned int dock_id;
|
|
|
|
dev_info(info->dev,
|
|
"external connector is %s (adc:0x%02x)\n",
|
|
attached ? "attached" : "detached", cable_type);
|
|
|
|
switch (cable_type) {
|
|
case MAX77693_MUIC_ADC_RESERVED_ACC_3: /* Dock-Smart */
|
|
/*
|
|
* Check power cable whether attached or detached state.
|
|
* The Dock-Smart device need surely external power supply.
|
|
* If power cable(USB/TA) isn't connected to Dock device,
|
|
* user can't use Dock-Smart for desktop mode.
|
|
*/
|
|
vbvolt = max77693_muic_get_cable_type(info,
|
|
MAX77693_CABLE_GROUP_VBVOLT, &cable_attached);
|
|
if (attached && !vbvolt) {
|
|
dev_warn(info->dev,
|
|
"Cannot detect external power supply\n");
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Notify Dock/MHL state.
|
|
* - Dock device include three type of cable which
|
|
* are HDMI, USB for mouse/keyboard and micro-usb port
|
|
* for USB/TA cable. Dock device need always exteranl
|
|
* power supply(USB/TA cable through micro-usb cable). Dock
|
|
* device support screen output of target to separate
|
|
* monitor and mouse/keyboard for desktop mode.
|
|
*
|
|
* Features of 'USB/TA cable with Dock device'
|
|
* - Support MHL
|
|
* - Support external output feature of audio
|
|
* - Support charging through micro-usb port without data
|
|
* connection if TA cable is connected to target.
|
|
* - Support charging and data connection through micro-usb port
|
|
* if USB cable is connected between target and host
|
|
* device.
|
|
* - Support OTG(On-The-Go) device (Ex: Mouse/Keyboard)
|
|
*/
|
|
ret = max77693_muic_set_path(info, info->path_usb, attached);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
extcon_set_state_sync(info->edev, EXTCON_DOCK, attached);
|
|
extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
|
|
goto out;
|
|
case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE: /* Dock-Desk */
|
|
dock_id = EXTCON_DOCK;
|
|
break;
|
|
case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD: /* Dock-Audio */
|
|
dock_id = EXTCON_DOCK;
|
|
if (!attached) {
|
|
extcon_set_state_sync(info->edev, EXTCON_USB, false);
|
|
extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
|
|
false);
|
|
}
|
|
break;
|
|
default:
|
|
dev_err(info->dev, "failed to detect %s dock device\n",
|
|
attached ? "attached" : "detached");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Dock-Car/Desk/Audio, PATH:AUDIO */
|
|
ret = max77693_muic_set_path(info, MAX77693_CONTROL1_SW_AUDIO,
|
|
attached);
|
|
if (ret < 0)
|
|
return ret;
|
|
extcon_set_state_sync(info->edev, dock_id, attached);
|
|
|
|
out:
|
|
return 0;
|
|
}
|
|
|
|
static int max77693_muic_dock_button_handler(struct max77693_muic_info *info,
|
|
int button_type, bool attached)
|
|
{
|
|
struct input_dev *dock = info->dock;
|
|
unsigned int code;
|
|
|
|
switch (button_type) {
|
|
case MAX77693_MUIC_ADC_REMOTE_S3_BUTTON-1
|
|
... MAX77693_MUIC_ADC_REMOTE_S3_BUTTON+1:
|
|
/* DOCK_KEY_PREV */
|
|
code = KEY_PREVIOUSSONG;
|
|
break;
|
|
case MAX77693_MUIC_ADC_REMOTE_S7_BUTTON-1
|
|
... MAX77693_MUIC_ADC_REMOTE_S7_BUTTON+1:
|
|
/* DOCK_KEY_NEXT */
|
|
code = KEY_NEXTSONG;
|
|
break;
|
|
case MAX77693_MUIC_ADC_REMOTE_S9_BUTTON:
|
|
/* DOCK_VOL_DOWN */
|
|
code = KEY_VOLUMEDOWN;
|
|
break;
|
|
case MAX77693_MUIC_ADC_REMOTE_S10_BUTTON:
|
|
/* DOCK_VOL_UP */
|
|
code = KEY_VOLUMEUP;
|
|
break;
|
|
case MAX77693_MUIC_ADC_REMOTE_S12_BUTTON-1
|
|
... MAX77693_MUIC_ADC_REMOTE_S12_BUTTON+1:
|
|
/* DOCK_KEY_PLAY_PAUSE */
|
|
code = KEY_PLAYPAUSE;
|
|
break;
|
|
default:
|
|
dev_err(info->dev,
|
|
"failed to detect %s key (adc:0x%x)\n",
|
|
attached ? "pressed" : "released", button_type);
|
|
return -EINVAL;
|
|
}
|
|
|
|
input_event(dock, EV_KEY, code, attached);
|
|
input_sync(dock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info)
|
|
{
|
|
int cable_type_gnd;
|
|
int ret = 0;
|
|
bool attached;
|
|
|
|
cable_type_gnd = max77693_muic_get_cable_type(info,
|
|
MAX77693_CABLE_GROUP_ADC_GND, &attached);
|
|
|
|
switch (cable_type_gnd) {
|
|
case MAX77693_MUIC_GND_USB_HOST:
|
|
case MAX77693_MUIC_GND_USB_HOST_VB:
|
|
/* USB_HOST, PATH: AP_USB */
|
|
ret = max77693_muic_set_path(info, MAX77693_CONTROL1_SW_USB,
|
|
attached);
|
|
if (ret < 0)
|
|
return ret;
|
|
extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached);
|
|
break;
|
|
case MAX77693_MUIC_GND_AV_CABLE_LOAD:
|
|
/* Audio Video Cable with load, PATH:AUDIO */
|
|
ret = max77693_muic_set_path(info, MAX77693_CONTROL1_SW_AUDIO,
|
|
attached);
|
|
if (ret < 0)
|
|
return ret;
|
|
extcon_set_state_sync(info->edev, EXTCON_USB, attached);
|
|
extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
|
|
attached);
|
|
break;
|
|
case MAX77693_MUIC_GND_MHL:
|
|
case MAX77693_MUIC_GND_MHL_VB:
|
|
/* MHL or MHL with USB/TA cable */
|
|
extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
|
|
break;
|
|
default:
|
|
dev_err(info->dev, "failed to detect %s cable of gnd type\n",
|
|
attached ? "attached" : "detached");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max77693_muic_jig_handler(struct max77693_muic_info *info,
|
|
int cable_type, bool attached)
|
|
{
|
|
int ret = 0;
|
|
u8 path = MAX77693_CONTROL1_SW_OPEN;
|
|
|
|
dev_info(info->dev,
|
|
"external connector is %s (adc:0x%02x)\n",
|
|
attached ? "attached" : "detached", cable_type);
|
|
|
|
switch (cable_type) {
|
|
case MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF: /* ADC_JIG_USB_OFF */
|
|
case MAX77693_MUIC_ADC_FACTORY_MODE_USB_ON: /* ADC_JIG_USB_ON */
|
|
/* PATH:AP_USB */
|
|
path = MAX77693_CONTROL1_SW_USB;
|
|
break;
|
|
case MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF: /* ADC_JIG_UART_OFF */
|
|
case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON: /* ADC_JIG_UART_ON */
|
|
/* PATH:AP_UART */
|
|
path = MAX77693_CONTROL1_SW_UART;
|
|
break;
|
|
default:
|
|
dev_err(info->dev, "failed to detect %s jig cable\n",
|
|
attached ? "attached" : "detached");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = max77693_muic_set_path(info, path, attached);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
extcon_set_state_sync(info->edev, EXTCON_JIG, attached);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max77693_muic_adc_handler(struct max77693_muic_info *info)
|
|
{
|
|
int cable_type;
|
|
int button_type;
|
|
bool attached;
|
|
int ret = 0;
|
|
|
|
/* Check accessory state which is either detached or attached */
|
|
cable_type = max77693_muic_get_cable_type(info,
|
|
MAX77693_CABLE_GROUP_ADC, &attached);
|
|
|
|
dev_info(info->dev,
|
|
"external connector is %s (adc:0x%02x, prev_adc:0x%x)\n",
|
|
attached ? "attached" : "detached", cable_type,
|
|
info->prev_cable_type);
|
|
|
|
switch (cable_type) {
|
|
case MAX77693_MUIC_ADC_GROUND:
|
|
/* USB_HOST/MHL/Audio */
|
|
max77693_muic_adc_ground_handler(info);
|
|
break;
|
|
case MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF:
|
|
case MAX77693_MUIC_ADC_FACTORY_MODE_USB_ON:
|
|
case MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF:
|
|
case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON:
|
|
/* JIG */
|
|
ret = max77693_muic_jig_handler(info, cable_type, attached);
|
|
if (ret < 0)
|
|
return ret;
|
|
break;
|
|
case MAX77693_MUIC_ADC_RESERVED_ACC_3: /* Dock-Smart */
|
|
case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE: /* Dock-Desk */
|
|
case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD: /* Dock-Audio */
|
|
/*
|
|
* DOCK device
|
|
*
|
|
* The MAX77693 MUIC device can detect total 34 cable type
|
|
* except of charger cable and MUIC device didn't define
|
|
* specfic role of cable in the range of from 0x01 to 0x12
|
|
* of ADC value. So, can use/define cable with no role according
|
|
* to schema of hardware board.
|
|
*/
|
|
ret = max77693_muic_dock_handler(info, cable_type, attached);
|
|
if (ret < 0)
|
|
return ret;
|
|
break;
|
|
case MAX77693_MUIC_ADC_REMOTE_S3_BUTTON: /* DOCK_KEY_PREV */
|
|
case MAX77693_MUIC_ADC_REMOTE_S7_BUTTON: /* DOCK_KEY_NEXT */
|
|
case MAX77693_MUIC_ADC_REMOTE_S9_BUTTON: /* DOCK_VOL_DOWN */
|
|
case MAX77693_MUIC_ADC_REMOTE_S10_BUTTON: /* DOCK_VOL_UP */
|
|
case MAX77693_MUIC_ADC_REMOTE_S12_BUTTON: /* DOCK_KEY_PLAY_PAUSE */
|
|
/*
|
|
* Button of DOCK device
|
|
* - the Prev/Next/Volume Up/Volume Down/Play-Pause button
|
|
*
|
|
* The MAX77693 MUIC device can detect total 34 cable type
|
|
* except of charger cable and MUIC device didn't define
|
|
* specfic role of cable in the range of from 0x01 to 0x12
|
|
* of ADC value. So, can use/define cable with no role according
|
|
* to schema of hardware board.
|
|
*/
|
|
if (attached)
|
|
button_type = info->prev_button_type = cable_type;
|
|
else
|
|
button_type = info->prev_button_type;
|
|
|
|
ret = max77693_muic_dock_button_handler(info, button_type,
|
|
attached);
|
|
if (ret < 0)
|
|
return ret;
|
|
break;
|
|
case MAX77693_MUIC_ADC_SEND_END_BUTTON:
|
|
case MAX77693_MUIC_ADC_REMOTE_S1_BUTTON:
|
|
case MAX77693_MUIC_ADC_REMOTE_S2_BUTTON:
|
|
case MAX77693_MUIC_ADC_REMOTE_S4_BUTTON:
|
|
case MAX77693_MUIC_ADC_REMOTE_S5_BUTTON:
|
|
case MAX77693_MUIC_ADC_REMOTE_S6_BUTTON:
|
|
case MAX77693_MUIC_ADC_REMOTE_S8_BUTTON:
|
|
case MAX77693_MUIC_ADC_REMOTE_S11_BUTTON:
|
|
case MAX77693_MUIC_ADC_RESERVED_ACC_1:
|
|
case MAX77693_MUIC_ADC_RESERVED_ACC_2:
|
|
case MAX77693_MUIC_ADC_RESERVED_ACC_4:
|
|
case MAX77693_MUIC_ADC_RESERVED_ACC_5:
|
|
case MAX77693_MUIC_ADC_CEA936_AUDIO:
|
|
case MAX77693_MUIC_ADC_PHONE_POWERED_DEV:
|
|
case MAX77693_MUIC_ADC_TTY_CONVERTER:
|
|
case MAX77693_MUIC_ADC_UART_CABLE:
|
|
case MAX77693_MUIC_ADC_CEA936A_TYPE1_CHG:
|
|
case MAX77693_MUIC_ADC_CEA936A_TYPE2_CHG:
|
|
/*
|
|
* This accessory isn't used in general case if it is specially
|
|
* needed to detect additional accessory, should implement
|
|
* proper operation when this accessory is attached/detached.
|
|
*/
|
|
dev_info(info->dev,
|
|
"accessory is %s but it isn't used (adc:0x%x)\n",
|
|
attached ? "attached" : "detached", cable_type);
|
|
return -EAGAIN;
|
|
default:
|
|
dev_err(info->dev,
|
|
"failed to detect %s accessory (adc:0x%x)\n",
|
|
attached ? "attached" : "detached", cable_type);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max77693_muic_chg_handler(struct max77693_muic_info *info)
|
|
{
|
|
int chg_type;
|
|
int cable_type_gnd;
|
|
int cable_type;
|
|
bool attached;
|
|
bool cable_attached;
|
|
int ret = 0;
|
|
|
|
chg_type = max77693_muic_get_cable_type(info,
|
|
MAX77693_CABLE_GROUP_CHG, &attached);
|
|
|
|
dev_info(info->dev,
|
|
"external connector is %s(chg_type:0x%x, prev_chg_type:0x%x)\n",
|
|
attached ? "attached" : "detached",
|
|
chg_type, info->prev_chg_type);
|
|
|
|
switch (chg_type) {
|
|
case MAX77693_CHARGER_TYPE_USB:
|
|
case MAX77693_CHARGER_TYPE_DEDICATED_CHG:
|
|
case MAX77693_CHARGER_TYPE_NONE:
|
|
/* Check MAX77693_CABLE_GROUP_ADC_GND type */
|
|
cable_type_gnd = max77693_muic_get_cable_type(info,
|
|
MAX77693_CABLE_GROUP_ADC_GND,
|
|
&cable_attached);
|
|
switch (cable_type_gnd) {
|
|
case MAX77693_MUIC_GND_MHL:
|
|
case MAX77693_MUIC_GND_MHL_VB:
|
|
/*
|
|
* MHL cable with USB/TA cable
|
|
* - MHL cable include two port(HDMI line and separate
|
|
* micro-usb port. When the target connect MHL cable,
|
|
* extcon driver check whether USB/TA cable is
|
|
* connected. If USB/TA cable is connected, extcon
|
|
* driver notify state to notifiee for charging battery.
|
|
*
|
|
* Features of 'USB/TA with MHL cable'
|
|
* - Support MHL
|
|
* - Support charging through micro-usb port without
|
|
* data connection
|
|
*/
|
|
extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
|
|
attached);
|
|
extcon_set_state_sync(info->edev, EXTCON_DISP_MHL,
|
|
cable_attached);
|
|
break;
|
|
}
|
|
|
|
/* Check MAX77693_CABLE_GROUP_ADC type */
|
|
cable_type = max77693_muic_get_cable_type(info,
|
|
MAX77693_CABLE_GROUP_ADC,
|
|
&cable_attached);
|
|
switch (cable_type) {
|
|
case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD: /* Dock-Audio */
|
|
/*
|
|
* Dock-Audio device with USB/TA cable
|
|
* - Dock device include two port(Dock-Audio and micro-
|
|
* usb port). When the target connect Dock-Audio device,
|
|
* extcon driver check whether USB/TA cable is connected
|
|
* or not. If USB/TA cable is connected, extcon driver
|
|
* notify state to notifiee for charging battery.
|
|
*
|
|
* Features of 'USB/TA cable with Dock-Audio device'
|
|
* - Support external output feature of audio.
|
|
* - Support charging through micro-usb port without
|
|
* data connection.
|
|
*/
|
|
extcon_set_state_sync(info->edev, EXTCON_USB,
|
|
attached);
|
|
extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
|
|
attached);
|
|
|
|
if (!cable_attached)
|
|
extcon_set_state_sync(info->edev, EXTCON_DOCK,
|
|
cable_attached);
|
|
break;
|
|
case MAX77693_MUIC_ADC_RESERVED_ACC_3: /* Dock-Smart */
|
|
/*
|
|
* Dock-Smart device with USB/TA cable
|
|
* - Dock-Desk device include three type of cable which
|
|
* are HDMI, USB for mouse/keyboard and micro-usb port
|
|
* for USB/TA cable. Dock-Smart device need always
|
|
* exteranl power supply(USB/TA cable through micro-usb
|
|
* cable). Dock-Smart device support screen output of
|
|
* target to separate monitor and mouse/keyboard for
|
|
* desktop mode.
|
|
*
|
|
* Features of 'USB/TA cable with Dock-Smart device'
|
|
* - Support MHL
|
|
* - Support external output feature of audio
|
|
* - Support charging through micro-usb port without
|
|
* data connection if TA cable is connected to target.
|
|
* - Support charging and data connection through micro-
|
|
* usb port if USB cable is connected between target
|
|
* and host device
|
|
* - Support OTG(On-The-Go) device (Ex: Mouse/Keyboard)
|
|
*/
|
|
ret = max77693_muic_set_path(info, info->path_usb,
|
|
attached);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
extcon_set_state_sync(info->edev, EXTCON_DOCK,
|
|
attached);
|
|
extcon_set_state_sync(info->edev, EXTCON_DISP_MHL,
|
|
attached);
|
|
break;
|
|
}
|
|
|
|
/* Check MAX77693_CABLE_GROUP_CHG type */
|
|
switch (chg_type) {
|
|
case MAX77693_CHARGER_TYPE_NONE:
|
|
/*
|
|
* When MHL(with USB/TA cable) or Dock-Audio with USB/TA
|
|
* cable is attached, muic device happen below two irq.
|
|
* - 'MAX77693_MUIC_IRQ_INT1_ADC' for detecting
|
|
* MHL/Dock-Audio.
|
|
* - 'MAX77693_MUIC_IRQ_INT2_CHGTYP' for detecting
|
|
* USB/TA cable connected to MHL or Dock-Audio.
|
|
* Always, happen eariler MAX77693_MUIC_IRQ_INT1_ADC
|
|
* irq than MAX77693_MUIC_IRQ_INT2_CHGTYP irq.
|
|
*
|
|
* If user attach MHL (with USB/TA cable and immediately
|
|
* detach MHL with USB/TA cable before MAX77693_MUIC_IRQ
|
|
* _INT2_CHGTYP irq is happened, USB/TA cable remain
|
|
* connected state to target. But USB/TA cable isn't
|
|
* connected to target. The user be face with unusual
|
|
* action. So, driver should check this situation in
|
|
* spite of, that previous charger type is N/A.
|
|
*/
|
|
break;
|
|
case MAX77693_CHARGER_TYPE_USB:
|
|
/* Only USB cable, PATH:AP_USB */
|
|
ret = max77693_muic_set_path(info, info->path_usb,
|
|
attached);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
extcon_set_state_sync(info->edev, EXTCON_USB,
|
|
attached);
|
|
extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
|
|
attached);
|
|
break;
|
|
case MAX77693_CHARGER_TYPE_DEDICATED_CHG:
|
|
/* Only TA cable */
|
|
extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
|
|
attached);
|
|
break;
|
|
}
|
|
break;
|
|
case MAX77693_CHARGER_TYPE_DOWNSTREAM_PORT:
|
|
extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP,
|
|
attached);
|
|
break;
|
|
case MAX77693_CHARGER_TYPE_APPLE_500MA:
|
|
extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW,
|
|
attached);
|
|
break;
|
|
case MAX77693_CHARGER_TYPE_APPLE_1A_2A:
|
|
extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST,
|
|
attached);
|
|
break;
|
|
case MAX77693_CHARGER_TYPE_DEAD_BATTERY:
|
|
break;
|
|
default:
|
|
dev_err(info->dev,
|
|
"failed to detect %s accessory (chg_type:0x%x)\n",
|
|
attached ? "attached" : "detached", chg_type);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void max77693_muic_irq_work(struct work_struct *work)
|
|
{
|
|
struct max77693_muic_info *info = container_of(work,
|
|
struct max77693_muic_info, irq_work);
|
|
int irq_type = -1;
|
|
int i, ret = 0;
|
|
|
|
if (!info->edev)
|
|
return;
|
|
|
|
mutex_lock(&info->mutex);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(muic_irqs); i++)
|
|
if (info->irq == muic_irqs[i].virq)
|
|
irq_type = muic_irqs[i].irq;
|
|
|
|
ret = regmap_bulk_read(info->max77693->regmap_muic,
|
|
MAX77693_MUIC_REG_STATUS1, info->status, 2);
|
|
if (ret) {
|
|
dev_err(info->dev, "failed to read MUIC register\n");
|
|
mutex_unlock(&info->mutex);
|
|
return;
|
|
}
|
|
|
|
switch (irq_type) {
|
|
case MAX77693_MUIC_IRQ_INT1_ADC:
|
|
case MAX77693_MUIC_IRQ_INT1_ADC_LOW:
|
|
case MAX77693_MUIC_IRQ_INT1_ADC_ERR:
|
|
case MAX77693_MUIC_IRQ_INT1_ADC1K:
|
|
/*
|
|
* Handle all of accessory except for
|
|
* type of charger accessory.
|
|
*/
|
|
ret = max77693_muic_adc_handler(info);
|
|
break;
|
|
case MAX77693_MUIC_IRQ_INT2_CHGTYP:
|
|
case MAX77693_MUIC_IRQ_INT2_CHGDETREUN:
|
|
case MAX77693_MUIC_IRQ_INT2_DCDTMR:
|
|
case MAX77693_MUIC_IRQ_INT2_DXOVP:
|
|
case MAX77693_MUIC_IRQ_INT2_VBVOLT:
|
|
case MAX77693_MUIC_IRQ_INT2_VIDRM:
|
|
/* Handle charger accessory */
|
|
ret = max77693_muic_chg_handler(info);
|
|
break;
|
|
case MAX77693_MUIC_IRQ_INT3_EOC:
|
|
case MAX77693_MUIC_IRQ_INT3_CGMBC:
|
|
case MAX77693_MUIC_IRQ_INT3_OVP:
|
|
case MAX77693_MUIC_IRQ_INT3_MBCCHG_ERR:
|
|
case MAX77693_MUIC_IRQ_INT3_CHG_ENABLED:
|
|
case MAX77693_MUIC_IRQ_INT3_BAT_DET:
|
|
break;
|
|
default:
|
|
dev_err(info->dev, "muic interrupt: irq %d occurred\n",
|
|
irq_type);
|
|
mutex_unlock(&info->mutex);
|
|
return;
|
|
}
|
|
|
|
if (ret < 0)
|
|
dev_err(info->dev, "failed to handle MUIC interrupt\n");
|
|
|
|
mutex_unlock(&info->mutex);
|
|
}
|
|
|
|
static irqreturn_t max77693_muic_irq_handler(int irq, void *data)
|
|
{
|
|
struct max77693_muic_info *info = data;
|
|
|
|
info->irq = irq;
|
|
schedule_work(&info->irq_work);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static const struct regmap_config max77693_muic_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
};
|
|
|
|
static int max77693_muic_detect_accessory(struct max77693_muic_info *info)
|
|
{
|
|
int ret = 0;
|
|
int adc;
|
|
int chg_type;
|
|
bool attached;
|
|
|
|
mutex_lock(&info->mutex);
|
|
|
|
/* Read STATUSx register to detect accessory */
|
|
ret = regmap_bulk_read(info->max77693->regmap_muic,
|
|
MAX77693_MUIC_REG_STATUS1, info->status, 2);
|
|
if (ret) {
|
|
dev_err(info->dev, "failed to read MUIC register\n");
|
|
mutex_unlock(&info->mutex);
|
|
return ret;
|
|
}
|
|
|
|
adc = max77693_muic_get_cable_type(info, MAX77693_CABLE_GROUP_ADC,
|
|
&attached);
|
|
if (attached && adc != MAX77693_MUIC_ADC_OPEN) {
|
|
ret = max77693_muic_adc_handler(info);
|
|
if (ret < 0) {
|
|
dev_err(info->dev, "Cannot detect accessory\n");
|
|
mutex_unlock(&info->mutex);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
chg_type = max77693_muic_get_cable_type(info, MAX77693_CABLE_GROUP_CHG,
|
|
&attached);
|
|
if (attached && chg_type != MAX77693_CHARGER_TYPE_NONE) {
|
|
ret = max77693_muic_chg_handler(info);
|
|
if (ret < 0) {
|
|
dev_err(info->dev, "Cannot detect charger accessory\n");
|
|
mutex_unlock(&info->mutex);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
mutex_unlock(&info->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void max77693_muic_detect_cable_wq(struct work_struct *work)
|
|
{
|
|
struct max77693_muic_info *info = container_of(to_delayed_work(work),
|
|
struct max77693_muic_info, wq_detcable);
|
|
|
|
max77693_muic_detect_accessory(info);
|
|
}
|
|
|
|
static int max77693_muic_probe(struct platform_device *pdev)
|
|
{
|
|
struct max77693_dev *max77693 = dev_get_drvdata(pdev->dev.parent);
|
|
struct max77693_platform_data *pdata = dev_get_platdata(max77693->dev);
|
|
struct max77693_muic_info *info;
|
|
struct max77693_reg_data *init_data;
|
|
int num_init_data;
|
|
int delay_jiffies;
|
|
int cable_type;
|
|
bool attached;
|
|
int ret;
|
|
int i;
|
|
unsigned int id;
|
|
|
|
info = devm_kzalloc(&pdev->dev, sizeof(struct max77693_muic_info),
|
|
GFP_KERNEL);
|
|
if (!info)
|
|
return -ENOMEM;
|
|
|
|
info->dev = &pdev->dev;
|
|
info->max77693 = max77693;
|
|
if (info->max77693->regmap_muic) {
|
|
dev_dbg(&pdev->dev, "allocate register map\n");
|
|
} else {
|
|
info->max77693->regmap_muic = devm_regmap_init_i2c(
|
|
info->max77693->i2c_muic,
|
|
&max77693_muic_regmap_config);
|
|
if (IS_ERR(info->max77693->regmap_muic)) {
|
|
ret = PTR_ERR(info->max77693->regmap_muic);
|
|
dev_err(max77693->dev,
|
|
"failed to allocate register map: %d\n", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/* Register input device for button of dock device */
|
|
info->dock = devm_input_allocate_device(&pdev->dev);
|
|
if (!info->dock) {
|
|
dev_err(&pdev->dev, "%s: failed to allocate input\n", __func__);
|
|
return -ENOMEM;
|
|
}
|
|
info->dock->name = "max77693-muic/dock";
|
|
info->dock->phys = "max77693-muic/extcon";
|
|
info->dock->dev.parent = &pdev->dev;
|
|
|
|
__set_bit(EV_REP, info->dock->evbit);
|
|
|
|
input_set_capability(info->dock, EV_KEY, KEY_VOLUMEUP);
|
|
input_set_capability(info->dock, EV_KEY, KEY_VOLUMEDOWN);
|
|
input_set_capability(info->dock, EV_KEY, KEY_PLAYPAUSE);
|
|
input_set_capability(info->dock, EV_KEY, KEY_PREVIOUSSONG);
|
|
input_set_capability(info->dock, EV_KEY, KEY_NEXTSONG);
|
|
|
|
ret = input_register_device(info->dock);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Cannot register input device error(%d)\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, info);
|
|
mutex_init(&info->mutex);
|
|
|
|
ret = devm_work_autocancel(&pdev->dev, &info->irq_work,
|
|
max77693_muic_irq_work);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Support irq domain for MAX77693 MUIC device */
|
|
for (i = 0; i < ARRAY_SIZE(muic_irqs); i++) {
|
|
struct max77693_muic_irq *muic_irq = &muic_irqs[i];
|
|
int virq;
|
|
|
|
virq = regmap_irq_get_virq(max77693->irq_data_muic,
|
|
muic_irq->irq);
|
|
if (virq <= 0)
|
|
return -EINVAL;
|
|
muic_irq->virq = virq;
|
|
|
|
ret = devm_request_threaded_irq(&pdev->dev, virq, NULL,
|
|
max77693_muic_irq_handler,
|
|
IRQF_NO_SUSPEND,
|
|
muic_irq->name, info);
|
|
if (ret) {
|
|
dev_err(&pdev->dev,
|
|
"failed: irq request (IRQ: %d, error :%d)\n",
|
|
muic_irq->irq, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/* Initialize extcon device */
|
|
info->edev = devm_extcon_dev_allocate(&pdev->dev,
|
|
max77693_extcon_cable);
|
|
if (IS_ERR(info->edev)) {
|
|
dev_err(&pdev->dev, "failed to allocate memory for extcon\n");
|
|
return PTR_ERR(info->edev);
|
|
}
|
|
|
|
ret = devm_extcon_dev_register(&pdev->dev, info->edev);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to register extcon device\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Initialize MUIC register by using platform data or default data */
|
|
if (pdata && pdata->muic_data) {
|
|
init_data = pdata->muic_data->init_data;
|
|
num_init_data = pdata->muic_data->num_init_data;
|
|
} else {
|
|
init_data = default_init_data;
|
|
num_init_data = ARRAY_SIZE(default_init_data);
|
|
}
|
|
|
|
for (i = 0; i < num_init_data; i++) {
|
|
regmap_write(info->max77693->regmap_muic,
|
|
init_data[i].addr,
|
|
init_data[i].data);
|
|
}
|
|
|
|
if (pdata && pdata->muic_data) {
|
|
struct max77693_muic_platform_data *muic_pdata
|
|
= pdata->muic_data;
|
|
|
|
/*
|
|
* Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
|
|
* h/w path of COMP2/COMN1 on CONTROL1 register.
|
|
*/
|
|
if (muic_pdata->path_uart)
|
|
info->path_uart = muic_pdata->path_uart;
|
|
else
|
|
info->path_uart = MAX77693_CONTROL1_SW_UART;
|
|
|
|
if (muic_pdata->path_usb)
|
|
info->path_usb = muic_pdata->path_usb;
|
|
else
|
|
info->path_usb = MAX77693_CONTROL1_SW_USB;
|
|
|
|
/*
|
|
* Default delay time for detecting cable state
|
|
* after certain time.
|
|
*/
|
|
if (muic_pdata->detcable_delay_ms)
|
|
delay_jiffies =
|
|
msecs_to_jiffies(muic_pdata->detcable_delay_ms);
|
|
else
|
|
delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
|
|
} else {
|
|
info->path_usb = MAX77693_CONTROL1_SW_USB;
|
|
info->path_uart = MAX77693_CONTROL1_SW_UART;
|
|
delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
|
|
}
|
|
|
|
/* Set initial path for UART when JIG is connected to get serial logs */
|
|
ret = regmap_bulk_read(info->max77693->regmap_muic,
|
|
MAX77693_MUIC_REG_STATUS1, info->status, 2);
|
|
if (ret) {
|
|
dev_err(info->dev, "failed to read MUIC register\n");
|
|
return ret;
|
|
}
|
|
cable_type = max77693_muic_get_cable_type(info,
|
|
MAX77693_CABLE_GROUP_ADC, &attached);
|
|
if (attached && (cable_type == MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON ||
|
|
cable_type == MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF))
|
|
max77693_muic_set_path(info, info->path_uart, true);
|
|
|
|
/* Check revision number of MUIC device*/
|
|
ret = regmap_read(info->max77693->regmap_muic,
|
|
MAX77693_MUIC_REG_ID, &id);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "failed to read revision number\n");
|
|
return ret;
|
|
}
|
|
dev_info(info->dev, "device ID : 0x%x\n", id);
|
|
|
|
/* Set ADC debounce time */
|
|
max77693_muic_set_debounce_time(info, ADC_DEBOUNCE_TIME_25MS);
|
|
|
|
/*
|
|
* Detect accessory after completing the initialization of platform
|
|
*
|
|
* - Use delayed workqueue to detect cable state and then
|
|
* notify cable state to notifiee/platform through uevent.
|
|
* After completing the booting of platform, the extcon provider
|
|
* driver should notify cable state to upper layer.
|
|
*/
|
|
INIT_DELAYED_WORK(&info->wq_detcable, max77693_muic_detect_cable_wq);
|
|
queue_delayed_work(system_power_efficient_wq, &info->wq_detcable,
|
|
delay_jiffies);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct platform_driver max77693_muic_driver = {
|
|
.driver = {
|
|
.name = DEV_NAME,
|
|
},
|
|
.probe = max77693_muic_probe,
|
|
};
|
|
|
|
module_platform_driver(max77693_muic_driver);
|
|
|
|
MODULE_DESCRIPTION("Maxim MAX77693 Extcon driver");
|
|
MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:max77693-muic");
|