mirror of
https://github.com/torvalds/linux.git
synced 2024-10-31 17:21:49 +00:00
d2b1839425
We were passing set_capacity() the capacity we calculated in terms of the number of blocks on the card, which happened to be the right units for 512-byte block cards. However, with 1024-byte block cards, we end up setting the capacity to half the number of blocks. Fix this by shifting by the appropriate amount. Thanks to Todd Blumer for pointing this out. Use get_capacity() to report the card capacity, rather than recalculating it from the CSD information. Finally, use our chosen IO block size for the SET_BLOCKLEN command rather than the CSD read block size. Currently these are equivalent, but will not be in the future. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
527 lines
11 KiB
C
527 lines
11 KiB
C
/*
|
|
* Block driver for media (i.e., flash cards)
|
|
*
|
|
* Copyright 2002 Hewlett-Packard Company
|
|
*
|
|
* Use consistent with the GNU GPL is permitted,
|
|
* provided that this copyright notice is
|
|
* preserved in its entirety in all copies and derived works.
|
|
*
|
|
* HEWLETT-PACKARD COMPANY MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
|
|
* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
|
|
* FITNESS FOR ANY PARTICULAR PURPOSE.
|
|
*
|
|
* Many thanks to Alessandro Rubini and Jonathan Corbet!
|
|
*
|
|
* Author: Andrew Christian
|
|
* 28 May 2002
|
|
*/
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/sched.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/hdreg.h>
|
|
#include <linux/kdev_t.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/devfs_fs_kernel.h>
|
|
|
|
#include <linux/mmc/card.h>
|
|
#include <linux/mmc/protocol.h>
|
|
|
|
#include <asm/system.h>
|
|
#include <asm/uaccess.h>
|
|
|
|
#include "mmc_queue.h"
|
|
|
|
/*
|
|
* max 8 partitions per card
|
|
*/
|
|
#define MMC_SHIFT 3
|
|
|
|
static int major;
|
|
|
|
/*
|
|
* There is one mmc_blk_data per slot.
|
|
*/
|
|
struct mmc_blk_data {
|
|
spinlock_t lock;
|
|
struct gendisk *disk;
|
|
struct mmc_queue queue;
|
|
|
|
unsigned int usage;
|
|
unsigned int block_bits;
|
|
};
|
|
|
|
static DECLARE_MUTEX(open_lock);
|
|
|
|
static struct mmc_blk_data *mmc_blk_get(struct gendisk *disk)
|
|
{
|
|
struct mmc_blk_data *md;
|
|
|
|
down(&open_lock);
|
|
md = disk->private_data;
|
|
if (md && md->usage == 0)
|
|
md = NULL;
|
|
if (md)
|
|
md->usage++;
|
|
up(&open_lock);
|
|
|
|
return md;
|
|
}
|
|
|
|
static void mmc_blk_put(struct mmc_blk_data *md)
|
|
{
|
|
down(&open_lock);
|
|
md->usage--;
|
|
if (md->usage == 0) {
|
|
put_disk(md->disk);
|
|
mmc_cleanup_queue(&md->queue);
|
|
kfree(md);
|
|
}
|
|
up(&open_lock);
|
|
}
|
|
|
|
static inline int mmc_blk_readonly(struct mmc_card *card)
|
|
{
|
|
return mmc_card_readonly(card) ||
|
|
!(card->csd.cmdclass & CCC_BLOCK_WRITE);
|
|
}
|
|
|
|
static int mmc_blk_open(struct inode *inode, struct file *filp)
|
|
{
|
|
struct mmc_blk_data *md;
|
|
int ret = -ENXIO;
|
|
|
|
md = mmc_blk_get(inode->i_bdev->bd_disk);
|
|
if (md) {
|
|
if (md->usage == 2)
|
|
check_disk_change(inode->i_bdev);
|
|
ret = 0;
|
|
|
|
if ((filp->f_mode & FMODE_WRITE) &&
|
|
mmc_blk_readonly(md->queue.card))
|
|
ret = -EROFS;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mmc_blk_release(struct inode *inode, struct file *filp)
|
|
{
|
|
struct mmc_blk_data *md = inode->i_bdev->bd_disk->private_data;
|
|
|
|
mmc_blk_put(md);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
mmc_blk_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg)
|
|
{
|
|
struct block_device *bdev = inode->i_bdev;
|
|
|
|
if (cmd == HDIO_GETGEO) {
|
|
struct hd_geometry geo;
|
|
|
|
memset(&geo, 0, sizeof(struct hd_geometry));
|
|
|
|
geo.cylinders = get_capacity(bdev->bd_disk) / (4 * 16);
|
|
geo.heads = 4;
|
|
geo.sectors = 16;
|
|
geo.start = get_start_sect(bdev);
|
|
|
|
return copy_to_user((void __user *)arg, &geo, sizeof(geo))
|
|
? -EFAULT : 0;
|
|
}
|
|
|
|
return -ENOTTY;
|
|
}
|
|
|
|
static struct block_device_operations mmc_bdops = {
|
|
.open = mmc_blk_open,
|
|
.release = mmc_blk_release,
|
|
.ioctl = mmc_blk_ioctl,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
struct mmc_blk_request {
|
|
struct mmc_request mrq;
|
|
struct mmc_command cmd;
|
|
struct mmc_command stop;
|
|
struct mmc_data data;
|
|
};
|
|
|
|
static int mmc_blk_prep_rq(struct mmc_queue *mq, struct request *req)
|
|
{
|
|
struct mmc_blk_data *md = mq->data;
|
|
int stat = BLKPREP_OK;
|
|
|
|
/*
|
|
* If we have no device, we haven't finished initialising.
|
|
*/
|
|
if (!md || !mq->card) {
|
|
printk(KERN_ERR "%s: killing request - no device/host\n",
|
|
req->rq_disk->disk_name);
|
|
stat = BLKPREP_KILL;
|
|
}
|
|
|
|
return stat;
|
|
}
|
|
|
|
static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
|
|
{
|
|
struct mmc_blk_data *md = mq->data;
|
|
struct mmc_card *card = md->queue.card;
|
|
int ret;
|
|
|
|
if (mmc_card_claim_host(card))
|
|
goto cmd_err;
|
|
|
|
do {
|
|
struct mmc_blk_request brq;
|
|
struct mmc_command cmd;
|
|
|
|
memset(&brq, 0, sizeof(struct mmc_blk_request));
|
|
brq.mrq.cmd = &brq.cmd;
|
|
brq.mrq.data = &brq.data;
|
|
|
|
brq.cmd.arg = req->sector << 9;
|
|
brq.cmd.flags = MMC_RSP_R1;
|
|
brq.data.timeout_ns = card->csd.tacc_ns * 10;
|
|
brq.data.timeout_clks = card->csd.tacc_clks * 10;
|
|
brq.data.blksz_bits = md->block_bits;
|
|
brq.data.blocks = req->nr_sectors >> (md->block_bits - 9);
|
|
brq.stop.opcode = MMC_STOP_TRANSMISSION;
|
|
brq.stop.arg = 0;
|
|
brq.stop.flags = MMC_RSP_R1B;
|
|
|
|
if (rq_data_dir(req) == READ) {
|
|
brq.cmd.opcode = brq.data.blocks > 1 ? MMC_READ_MULTIPLE_BLOCK : MMC_READ_SINGLE_BLOCK;
|
|
brq.data.flags |= MMC_DATA_READ;
|
|
} else {
|
|
brq.cmd.opcode = MMC_WRITE_BLOCK;
|
|
brq.data.flags |= MMC_DATA_WRITE;
|
|
brq.data.blocks = 1;
|
|
}
|
|
brq.mrq.stop = brq.data.blocks > 1 ? &brq.stop : NULL;
|
|
|
|
brq.data.sg = mq->sg;
|
|
brq.data.sg_len = blk_rq_map_sg(req->q, req, brq.data.sg);
|
|
|
|
mmc_wait_for_req(card->host, &brq.mrq);
|
|
if (brq.cmd.error) {
|
|
printk(KERN_ERR "%s: error %d sending read/write command\n",
|
|
req->rq_disk->disk_name, brq.cmd.error);
|
|
goto cmd_err;
|
|
}
|
|
|
|
if (brq.data.error) {
|
|
printk(KERN_ERR "%s: error %d transferring data\n",
|
|
req->rq_disk->disk_name, brq.data.error);
|
|
goto cmd_err;
|
|
}
|
|
|
|
if (brq.stop.error) {
|
|
printk(KERN_ERR "%s: error %d sending stop command\n",
|
|
req->rq_disk->disk_name, brq.stop.error);
|
|
goto cmd_err;
|
|
}
|
|
|
|
do {
|
|
int err;
|
|
|
|
cmd.opcode = MMC_SEND_STATUS;
|
|
cmd.arg = card->rca << 16;
|
|
cmd.flags = MMC_RSP_R1;
|
|
err = mmc_wait_for_cmd(card->host, &cmd, 5);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: error %d requesting status\n",
|
|
req->rq_disk->disk_name, err);
|
|
goto cmd_err;
|
|
}
|
|
} while (!(cmd.resp[0] & R1_READY_FOR_DATA));
|
|
|
|
#if 0
|
|
if (cmd.resp[0] & ~0x00000900)
|
|
printk(KERN_ERR "%s: status = %08x\n",
|
|
req->rq_disk->disk_name, cmd.resp[0]);
|
|
if (mmc_decode_status(cmd.resp))
|
|
goto cmd_err;
|
|
#endif
|
|
|
|
/*
|
|
* A block was successfully transferred.
|
|
*/
|
|
spin_lock_irq(&md->lock);
|
|
ret = end_that_request_chunk(req, 1, brq.data.bytes_xfered);
|
|
if (!ret) {
|
|
/*
|
|
* The whole request completed successfully.
|
|
*/
|
|
add_disk_randomness(req->rq_disk);
|
|
blkdev_dequeue_request(req);
|
|
end_that_request_last(req);
|
|
}
|
|
spin_unlock_irq(&md->lock);
|
|
} while (ret);
|
|
|
|
mmc_card_release_host(card);
|
|
|
|
return 1;
|
|
|
|
cmd_err:
|
|
mmc_card_release_host(card);
|
|
|
|
/*
|
|
* This is a little draconian, but until we get proper
|
|
* error handling sorted out here, its the best we can
|
|
* do - especially as some hosts have no idea how much
|
|
* data was transferred before the error occurred.
|
|
*/
|
|
spin_lock_irq(&md->lock);
|
|
do {
|
|
ret = end_that_request_chunk(req, 0,
|
|
req->current_nr_sectors << 9);
|
|
} while (ret);
|
|
|
|
add_disk_randomness(req->rq_disk);
|
|
blkdev_dequeue_request(req);
|
|
end_that_request_last(req);
|
|
spin_unlock_irq(&md->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define MMC_NUM_MINORS (256 >> MMC_SHIFT)
|
|
|
|
static unsigned long dev_use[MMC_NUM_MINORS/(8*sizeof(unsigned long))];
|
|
|
|
static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card)
|
|
{
|
|
struct mmc_blk_data *md;
|
|
int devidx, ret;
|
|
|
|
devidx = find_first_zero_bit(dev_use, MMC_NUM_MINORS);
|
|
if (devidx >= MMC_NUM_MINORS)
|
|
return ERR_PTR(-ENOSPC);
|
|
__set_bit(devidx, dev_use);
|
|
|
|
md = kmalloc(sizeof(struct mmc_blk_data), GFP_KERNEL);
|
|
if (md) {
|
|
memset(md, 0, sizeof(struct mmc_blk_data));
|
|
|
|
md->disk = alloc_disk(1 << MMC_SHIFT);
|
|
if (md->disk == NULL) {
|
|
kfree(md);
|
|
md = ERR_PTR(-ENOMEM);
|
|
goto out;
|
|
}
|
|
|
|
spin_lock_init(&md->lock);
|
|
md->usage = 1;
|
|
|
|
ret = mmc_init_queue(&md->queue, card, &md->lock);
|
|
if (ret) {
|
|
put_disk(md->disk);
|
|
kfree(md);
|
|
md = ERR_PTR(ret);
|
|
goto out;
|
|
}
|
|
md->queue.prep_fn = mmc_blk_prep_rq;
|
|
md->queue.issue_fn = mmc_blk_issue_rq;
|
|
md->queue.data = md;
|
|
|
|
md->disk->major = major;
|
|
md->disk->first_minor = devidx << MMC_SHIFT;
|
|
md->disk->fops = &mmc_bdops;
|
|
md->disk->private_data = md;
|
|
md->disk->queue = md->queue.queue;
|
|
md->disk->driverfs_dev = &card->dev;
|
|
|
|
/*
|
|
* As discussed on lkml, GENHD_FL_REMOVABLE should:
|
|
*
|
|
* - be set for removable media with permanent block devices
|
|
* - be unset for removable block devices with permanent media
|
|
*
|
|
* Since MMC block devices clearly fall under the second
|
|
* case, we do not set GENHD_FL_REMOVABLE. Userspace
|
|
* should use the block device creation/destruction hotplug
|
|
* messages to tell when the card is present.
|
|
*/
|
|
|
|
sprintf(md->disk->disk_name, "mmcblk%d", devidx);
|
|
sprintf(md->disk->devfs_name, "mmc/blk%d", devidx);
|
|
|
|
md->block_bits = card->csd.read_blkbits;
|
|
|
|
blk_queue_hardsect_size(md->queue.queue, 1 << md->block_bits);
|
|
|
|
/*
|
|
* The CSD capacity field is in units of read_blkbits.
|
|
* set_capacity takes units of 512 bytes.
|
|
*/
|
|
set_capacity(md->disk, card->csd.capacity << (card->csd.read_blkbits - 9));
|
|
}
|
|
out:
|
|
return md;
|
|
}
|
|
|
|
static int
|
|
mmc_blk_set_blksize(struct mmc_blk_data *md, struct mmc_card *card)
|
|
{
|
|
struct mmc_command cmd;
|
|
int err;
|
|
|
|
mmc_card_claim_host(card);
|
|
cmd.opcode = MMC_SET_BLOCKLEN;
|
|
cmd.arg = 1 << md->block_bits;
|
|
cmd.flags = MMC_RSP_R1;
|
|
err = mmc_wait_for_cmd(card->host, &cmd, 5);
|
|
mmc_card_release_host(card);
|
|
|
|
if (err) {
|
|
printk(KERN_ERR "%s: unable to set block size to %d: %d\n",
|
|
md->disk->disk_name, cmd.arg, err);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mmc_blk_probe(struct mmc_card *card)
|
|
{
|
|
struct mmc_blk_data *md;
|
|
int err;
|
|
|
|
/*
|
|
* Check that the card supports the command class(es) we need.
|
|
*/
|
|
if (!(card->csd.cmdclass & CCC_BLOCK_READ))
|
|
return -ENODEV;
|
|
|
|
if (card->csd.read_blkbits < 9) {
|
|
printk(KERN_WARNING "%s: read blocksize too small (%u)\n",
|
|
mmc_card_id(card), 1 << card->csd.read_blkbits);
|
|
return -ENODEV;
|
|
}
|
|
|
|
md = mmc_blk_alloc(card);
|
|
if (IS_ERR(md))
|
|
return PTR_ERR(md);
|
|
|
|
err = mmc_blk_set_blksize(md, card);
|
|
if (err)
|
|
goto out;
|
|
|
|
printk(KERN_INFO "%s: %s %s %luKiB %s\n",
|
|
md->disk->disk_name, mmc_card_id(card), mmc_card_name(card),
|
|
get_capacity(md->disk) >> 1, mmc_blk_readonly(card)?"(ro)":"");
|
|
|
|
mmc_set_drvdata(card, md);
|
|
add_disk(md->disk);
|
|
return 0;
|
|
|
|
out:
|
|
mmc_blk_put(md);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void mmc_blk_remove(struct mmc_card *card)
|
|
{
|
|
struct mmc_blk_data *md = mmc_get_drvdata(card);
|
|
|
|
if (md) {
|
|
int devidx;
|
|
|
|
del_gendisk(md->disk);
|
|
|
|
/*
|
|
* I think this is needed.
|
|
*/
|
|
md->disk->queue = NULL;
|
|
|
|
devidx = md->disk->first_minor >> MMC_SHIFT;
|
|
__clear_bit(devidx, dev_use);
|
|
|
|
mmc_blk_put(md);
|
|
}
|
|
mmc_set_drvdata(card, NULL);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int mmc_blk_suspend(struct mmc_card *card, pm_message_t state)
|
|
{
|
|
struct mmc_blk_data *md = mmc_get_drvdata(card);
|
|
|
|
if (md) {
|
|
mmc_queue_suspend(&md->queue);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int mmc_blk_resume(struct mmc_card *card)
|
|
{
|
|
struct mmc_blk_data *md = mmc_get_drvdata(card);
|
|
|
|
if (md) {
|
|
mmc_blk_set_blksize(md, card);
|
|
mmc_queue_resume(&md->queue);
|
|
}
|
|
return 0;
|
|
}
|
|
#else
|
|
#define mmc_blk_suspend NULL
|
|
#define mmc_blk_resume NULL
|
|
#endif
|
|
|
|
static struct mmc_driver mmc_driver = {
|
|
.drv = {
|
|
.name = "mmcblk",
|
|
},
|
|
.probe = mmc_blk_probe,
|
|
.remove = mmc_blk_remove,
|
|
.suspend = mmc_blk_suspend,
|
|
.resume = mmc_blk_resume,
|
|
};
|
|
|
|
static int __init mmc_blk_init(void)
|
|
{
|
|
int res = -ENOMEM;
|
|
|
|
res = register_blkdev(major, "mmc");
|
|
if (res < 0) {
|
|
printk(KERN_WARNING "Unable to get major %d for MMC media: %d\n",
|
|
major, res);
|
|
goto out;
|
|
}
|
|
if (major == 0)
|
|
major = res;
|
|
|
|
devfs_mk_dir("mmc");
|
|
return mmc_register_driver(&mmc_driver);
|
|
|
|
out:
|
|
return res;
|
|
}
|
|
|
|
static void __exit mmc_blk_exit(void)
|
|
{
|
|
mmc_unregister_driver(&mmc_driver);
|
|
devfs_remove("mmc");
|
|
unregister_blkdev(major, "mmc");
|
|
}
|
|
|
|
module_init(mmc_blk_init);
|
|
module_exit(mmc_blk_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("Multimedia Card (MMC) block device driver");
|
|
|
|
module_param(major, int, 0444);
|
|
MODULE_PARM_DESC(major, "specify the major device number for MMC block driver");
|