mirror of
https://github.com/torvalds/linux.git
synced 2024-12-27 05:11:48 +00:00
fecb8865de
AMD/Spansion use a device id of 0x7e to indicate an extended device is present at offset 0xe and 0xf in the query data. I've verified with Spansion that all their chips (mfr == 0x01) with an id of 0x7e use it to indicate an extended id is present. What's more, there are no chips with a NON-extended id that is the same as a different chip's extended id. In other words, when the extended ID is present, one can replace the normal id with the extended id without losing any information. Which is what I've done. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
450 lines
13 KiB
C
450 lines
13 KiB
C
/*
|
|
Common Flash Interface probe code.
|
|
(C) 2000 Red Hat. GPL'd.
|
|
$Id: cfi_probe.c,v 1.86 2005/11/29 14:48:31 gleixner Exp $
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <asm/io.h>
|
|
#include <asm/byteorder.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <linux/mtd/xip.h>
|
|
#include <linux/mtd/map.h>
|
|
#include <linux/mtd/cfi.h>
|
|
#include <linux/mtd/gen_probe.h>
|
|
|
|
//#define DEBUG_CFI
|
|
|
|
#ifdef DEBUG_CFI
|
|
static void print_cfi_ident(struct cfi_ident *);
|
|
#endif
|
|
|
|
static int cfi_probe_chip(struct map_info *map, __u32 base,
|
|
unsigned long *chip_map, struct cfi_private *cfi);
|
|
static int cfi_chip_setup(struct map_info *map, struct cfi_private *cfi);
|
|
|
|
struct mtd_info *cfi_probe(struct map_info *map);
|
|
|
|
#ifdef CONFIG_MTD_XIP
|
|
|
|
/* only needed for short periods, so this is rather simple */
|
|
#define xip_disable() local_irq_disable()
|
|
|
|
#define xip_allowed(base, map) \
|
|
do { \
|
|
(void) map_read(map, base); \
|
|
xip_iprefetch(); \
|
|
local_irq_enable(); \
|
|
} while (0)
|
|
|
|
#define xip_enable(base, map, cfi) \
|
|
do { \
|
|
cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); \
|
|
cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); \
|
|
xip_allowed(base, map); \
|
|
} while (0)
|
|
|
|
#define xip_disable_qry(base, map, cfi) \
|
|
do { \
|
|
xip_disable(); \
|
|
cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); \
|
|
cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); \
|
|
cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL); \
|
|
} while (0)
|
|
|
|
#else
|
|
|
|
#define xip_disable() do { } while (0)
|
|
#define xip_allowed(base, map) do { } while (0)
|
|
#define xip_enable(base, map, cfi) do { } while (0)
|
|
#define xip_disable_qry(base, map, cfi) do { } while (0)
|
|
|
|
#endif
|
|
|
|
/* check for QRY.
|
|
in: interleave,type,mode
|
|
ret: table index, <0 for error
|
|
*/
|
|
static int __xipram qry_present(struct map_info *map, __u32 base,
|
|
struct cfi_private *cfi)
|
|
{
|
|
int osf = cfi->interleave * cfi->device_type; // scale factor
|
|
map_word val[3];
|
|
map_word qry[3];
|
|
|
|
qry[0] = cfi_build_cmd('Q', map, cfi);
|
|
qry[1] = cfi_build_cmd('R', map, cfi);
|
|
qry[2] = cfi_build_cmd('Y', map, cfi);
|
|
|
|
val[0] = map_read(map, base + osf*0x10);
|
|
val[1] = map_read(map, base + osf*0x11);
|
|
val[2] = map_read(map, base + osf*0x12);
|
|
|
|
if (!map_word_equal(map, qry[0], val[0]))
|
|
return 0;
|
|
|
|
if (!map_word_equal(map, qry[1], val[1]))
|
|
return 0;
|
|
|
|
if (!map_word_equal(map, qry[2], val[2]))
|
|
return 0;
|
|
|
|
return 1; // "QRY" found
|
|
}
|
|
|
|
static int __xipram cfi_probe_chip(struct map_info *map, __u32 base,
|
|
unsigned long *chip_map, struct cfi_private *cfi)
|
|
{
|
|
int i;
|
|
|
|
if ((base + 0) >= map->size) {
|
|
printk(KERN_NOTICE
|
|
"Probe at base[0x00](0x%08lx) past the end of the map(0x%08lx)\n",
|
|
(unsigned long)base, map->size -1);
|
|
return 0;
|
|
}
|
|
if ((base + 0xff) >= map->size) {
|
|
printk(KERN_NOTICE
|
|
"Probe at base[0x55](0x%08lx) past the end of the map(0x%08lx)\n",
|
|
(unsigned long)base + 0x55, map->size -1);
|
|
return 0;
|
|
}
|
|
|
|
xip_disable();
|
|
cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
|
|
cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
|
|
cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL);
|
|
|
|
if (!qry_present(map,base,cfi)) {
|
|
xip_enable(base, map, cfi);
|
|
return 0;
|
|
}
|
|
|
|
if (!cfi->numchips) {
|
|
/* This is the first time we're called. Set up the CFI
|
|
stuff accordingly and return */
|
|
return cfi_chip_setup(map, cfi);
|
|
}
|
|
|
|
/* Check each previous chip to see if it's an alias */
|
|
for (i=0; i < (base >> cfi->chipshift); i++) {
|
|
unsigned long start;
|
|
if(!test_bit(i, chip_map)) {
|
|
/* Skip location; no valid chip at this address */
|
|
continue;
|
|
}
|
|
start = i << cfi->chipshift;
|
|
/* This chip should be in read mode if it's one
|
|
we've already touched. */
|
|
if (qry_present(map, start, cfi)) {
|
|
/* Eep. This chip also had the QRY marker.
|
|
* Is it an alias for the new one? */
|
|
cfi_send_gen_cmd(0xF0, 0, start, map, cfi, cfi->device_type, NULL);
|
|
cfi_send_gen_cmd(0xFF, 0, start, map, cfi, cfi->device_type, NULL);
|
|
|
|
/* If the QRY marker goes away, it's an alias */
|
|
if (!qry_present(map, start, cfi)) {
|
|
xip_allowed(base, map);
|
|
printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n",
|
|
map->name, base, start);
|
|
return 0;
|
|
}
|
|
/* Yes, it's actually got QRY for data. Most
|
|
* unfortunate. Stick the new chip in read mode
|
|
* too and if it's the same, assume it's an alias. */
|
|
/* FIXME: Use other modes to do a proper check */
|
|
cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
|
|
cfi_send_gen_cmd(0xFF, 0, start, map, cfi, cfi->device_type, NULL);
|
|
|
|
if (qry_present(map, base, cfi)) {
|
|
xip_allowed(base, map);
|
|
printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n",
|
|
map->name, base, start);
|
|
return 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* OK, if we got to here, then none of the previous chips appear to
|
|
be aliases for the current one. */
|
|
set_bit((base >> cfi->chipshift), chip_map); /* Update chip map */
|
|
cfi->numchips++;
|
|
|
|
/* Put it back into Read Mode */
|
|
cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
|
|
cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
|
|
xip_allowed(base, map);
|
|
|
|
printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n",
|
|
map->name, cfi->interleave, cfi->device_type*8, base,
|
|
map->bankwidth*8);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int __xipram cfi_chip_setup(struct map_info *map,
|
|
struct cfi_private *cfi)
|
|
{
|
|
int ofs_factor = cfi->interleave*cfi->device_type;
|
|
__u32 base = 0;
|
|
int num_erase_regions = cfi_read_query(map, base + (0x10 + 28)*ofs_factor);
|
|
int i;
|
|
|
|
xip_enable(base, map, cfi);
|
|
#ifdef DEBUG_CFI
|
|
printk("Number of erase regions: %d\n", num_erase_regions);
|
|
#endif
|
|
if (!num_erase_regions)
|
|
return 0;
|
|
|
|
cfi->cfiq = kmalloc(sizeof(struct cfi_ident) + num_erase_regions * 4, GFP_KERNEL);
|
|
if (!cfi->cfiq) {
|
|
printk(KERN_WARNING "%s: kmalloc failed for CFI ident structure\n", map->name);
|
|
return 0;
|
|
}
|
|
|
|
memset(cfi->cfiq,0,sizeof(struct cfi_ident));
|
|
|
|
cfi->cfi_mode = CFI_MODE_CFI;
|
|
|
|
/* Read the CFI info structure */
|
|
xip_disable_qry(base, map, cfi);
|
|
for (i=0; i<(sizeof(struct cfi_ident) + num_erase_regions * 4); i++)
|
|
((unsigned char *)cfi->cfiq)[i] = cfi_read_query(map,base + (0x10 + i)*ofs_factor);
|
|
|
|
/* Note we put the device back into Read Mode BEFORE going into Auto
|
|
* Select Mode, as some devices support nesting of modes, others
|
|
* don't. This way should always work.
|
|
* On cmdset 0001 the writes of 0xaa and 0x55 are not needed, and
|
|
* so should be treated as nops or illegal (and so put the device
|
|
* back into Read Mode, which is a nop in this case).
|
|
*/
|
|
cfi_send_gen_cmd(0xf0, 0, base, map, cfi, cfi->device_type, NULL);
|
|
cfi_send_gen_cmd(0xaa, 0x555, base, map, cfi, cfi->device_type, NULL);
|
|
cfi_send_gen_cmd(0x55, 0x2aa, base, map, cfi, cfi->device_type, NULL);
|
|
cfi_send_gen_cmd(0x90, 0x555, base, map, cfi, cfi->device_type, NULL);
|
|
cfi->mfr = cfi_read_query16(map, base);
|
|
cfi->id = cfi_read_query16(map, base + ofs_factor);
|
|
|
|
/* Get AMD/Spansion extended JEDEC ID */
|
|
if (cfi->mfr == CFI_MFR_AMD && (cfi->id & 0xff) == 0x7e)
|
|
cfi->id = cfi_read_query(map, base + 0xe * ofs_factor) << 8 |
|
|
cfi_read_query(map, base + 0xf * ofs_factor);
|
|
|
|
/* Put it back into Read Mode */
|
|
cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
|
|
/* ... even if it's an Intel chip */
|
|
cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
|
|
xip_allowed(base, map);
|
|
|
|
/* Do any necessary byteswapping */
|
|
cfi->cfiq->P_ID = le16_to_cpu(cfi->cfiq->P_ID);
|
|
|
|
cfi->cfiq->P_ADR = le16_to_cpu(cfi->cfiq->P_ADR);
|
|
cfi->cfiq->A_ID = le16_to_cpu(cfi->cfiq->A_ID);
|
|
cfi->cfiq->A_ADR = le16_to_cpu(cfi->cfiq->A_ADR);
|
|
cfi->cfiq->InterfaceDesc = le16_to_cpu(cfi->cfiq->InterfaceDesc);
|
|
cfi->cfiq->MaxBufWriteSize = le16_to_cpu(cfi->cfiq->MaxBufWriteSize);
|
|
|
|
#ifdef DEBUG_CFI
|
|
/* Dump the information therein */
|
|
print_cfi_ident(cfi->cfiq);
|
|
#endif
|
|
|
|
for (i=0; i<cfi->cfiq->NumEraseRegions; i++) {
|
|
cfi->cfiq->EraseRegionInfo[i] = le32_to_cpu(cfi->cfiq->EraseRegionInfo[i]);
|
|
|
|
#ifdef DEBUG_CFI
|
|
printk(" Erase Region #%d: BlockSize 0x%4.4X bytes, %d blocks\n",
|
|
i, (cfi->cfiq->EraseRegionInfo[i] >> 8) & ~0xff,
|
|
(cfi->cfiq->EraseRegionInfo[i] & 0xffff) + 1);
|
|
#endif
|
|
}
|
|
|
|
printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n",
|
|
map->name, cfi->interleave, cfi->device_type*8, base,
|
|
map->bankwidth*8);
|
|
|
|
return 1;
|
|
}
|
|
|
|
#ifdef DEBUG_CFI
|
|
static char *vendorname(__u16 vendor)
|
|
{
|
|
switch (vendor) {
|
|
case P_ID_NONE:
|
|
return "None";
|
|
|
|
case P_ID_INTEL_EXT:
|
|
return "Intel/Sharp Extended";
|
|
|
|
case P_ID_AMD_STD:
|
|
return "AMD/Fujitsu Standard";
|
|
|
|
case P_ID_INTEL_STD:
|
|
return "Intel/Sharp Standard";
|
|
|
|
case P_ID_AMD_EXT:
|
|
return "AMD/Fujitsu Extended";
|
|
|
|
case P_ID_WINBOND:
|
|
return "Winbond Standard";
|
|
|
|
case P_ID_ST_ADV:
|
|
return "ST Advanced";
|
|
|
|
case P_ID_MITSUBISHI_STD:
|
|
return "Mitsubishi Standard";
|
|
|
|
case P_ID_MITSUBISHI_EXT:
|
|
return "Mitsubishi Extended";
|
|
|
|
case P_ID_SST_PAGE:
|
|
return "SST Page Write";
|
|
|
|
case P_ID_INTEL_PERFORMANCE:
|
|
return "Intel Performance Code";
|
|
|
|
case P_ID_INTEL_DATA:
|
|
return "Intel Data";
|
|
|
|
case P_ID_RESERVED:
|
|
return "Not Allowed / Reserved for Future Use";
|
|
|
|
default:
|
|
return "Unknown";
|
|
}
|
|
}
|
|
|
|
|
|
static void print_cfi_ident(struct cfi_ident *cfip)
|
|
{
|
|
#if 0
|
|
if (cfip->qry[0] != 'Q' || cfip->qry[1] != 'R' || cfip->qry[2] != 'Y') {
|
|
printk("Invalid CFI ident structure.\n");
|
|
return;
|
|
}
|
|
#endif
|
|
printk("Primary Vendor Command Set: %4.4X (%s)\n", cfip->P_ID, vendorname(cfip->P_ID));
|
|
if (cfip->P_ADR)
|
|
printk("Primary Algorithm Table at %4.4X\n", cfip->P_ADR);
|
|
else
|
|
printk("No Primary Algorithm Table\n");
|
|
|
|
printk("Alternative Vendor Command Set: %4.4X (%s)\n", cfip->A_ID, vendorname(cfip->A_ID));
|
|
if (cfip->A_ADR)
|
|
printk("Alternate Algorithm Table at %4.4X\n", cfip->A_ADR);
|
|
else
|
|
printk("No Alternate Algorithm Table\n");
|
|
|
|
|
|
printk("Vcc Minimum: %2d.%d V\n", cfip->VccMin >> 4, cfip->VccMin & 0xf);
|
|
printk("Vcc Maximum: %2d.%d V\n", cfip->VccMax >> 4, cfip->VccMax & 0xf);
|
|
if (cfip->VppMin) {
|
|
printk("Vpp Minimum: %2d.%d V\n", cfip->VppMin >> 4, cfip->VppMin & 0xf);
|
|
printk("Vpp Maximum: %2d.%d V\n", cfip->VppMax >> 4, cfip->VppMax & 0xf);
|
|
}
|
|
else
|
|
printk("No Vpp line\n");
|
|
|
|
printk("Typical byte/word write timeout: %d µs\n", 1<<cfip->WordWriteTimeoutTyp);
|
|
printk("Maximum byte/word write timeout: %d µs\n", (1<<cfip->WordWriteTimeoutMax) * (1<<cfip->WordWriteTimeoutTyp));
|
|
|
|
if (cfip->BufWriteTimeoutTyp || cfip->BufWriteTimeoutMax) {
|
|
printk("Typical full buffer write timeout: %d µs\n", 1<<cfip->BufWriteTimeoutTyp);
|
|
printk("Maximum full buffer write timeout: %d µs\n", (1<<cfip->BufWriteTimeoutMax) * (1<<cfip->BufWriteTimeoutTyp));
|
|
}
|
|
else
|
|
printk("Full buffer write not supported\n");
|
|
|
|
printk("Typical block erase timeout: %d ms\n", 1<<cfip->BlockEraseTimeoutTyp);
|
|
printk("Maximum block erase timeout: %d ms\n", (1<<cfip->BlockEraseTimeoutMax) * (1<<cfip->BlockEraseTimeoutTyp));
|
|
if (cfip->ChipEraseTimeoutTyp || cfip->ChipEraseTimeoutMax) {
|
|
printk("Typical chip erase timeout: %d ms\n", 1<<cfip->ChipEraseTimeoutTyp);
|
|
printk("Maximum chip erase timeout: %d ms\n", (1<<cfip->ChipEraseTimeoutMax) * (1<<cfip->ChipEraseTimeoutTyp));
|
|
}
|
|
else
|
|
printk("Chip erase not supported\n");
|
|
|
|
printk("Device size: 0x%X bytes (%d MiB)\n", 1 << cfip->DevSize, 1<< (cfip->DevSize - 20));
|
|
printk("Flash Device Interface description: 0x%4.4X\n", cfip->InterfaceDesc);
|
|
switch(cfip->InterfaceDesc) {
|
|
case CFI_INTERFACE_X8_ASYNC:
|
|
printk(" - x8-only asynchronous interface\n");
|
|
break;
|
|
|
|
case CFI_INTERFACE_X16_ASYNC:
|
|
printk(" - x16-only asynchronous interface\n");
|
|
break;
|
|
|
|
case CFI_INTERFACE_X8_BY_X16_ASYNC:
|
|
printk(" - supports x8 and x16 via BYTE# with asynchronous interface\n");
|
|
break;
|
|
|
|
case CFI_INTERFACE_X32_ASYNC:
|
|
printk(" - x32-only asynchronous interface\n");
|
|
break;
|
|
|
|
case CFI_INTERFACE_X16_BY_X32_ASYNC:
|
|
printk(" - supports x16 and x32 via Word# with asynchronous interface\n");
|
|
break;
|
|
|
|
case CFI_INTERFACE_NOT_ALLOWED:
|
|
printk(" - Not Allowed / Reserved\n");
|
|
break;
|
|
|
|
default:
|
|
printk(" - Unknown\n");
|
|
break;
|
|
}
|
|
|
|
printk("Max. bytes in buffer write: 0x%x\n", 1<< cfip->MaxBufWriteSize);
|
|
printk("Number of Erase Block Regions: %d\n", cfip->NumEraseRegions);
|
|
|
|
}
|
|
#endif /* DEBUG_CFI */
|
|
|
|
static struct chip_probe cfi_chip_probe = {
|
|
.name = "CFI",
|
|
.probe_chip = cfi_probe_chip
|
|
};
|
|
|
|
struct mtd_info *cfi_probe(struct map_info *map)
|
|
{
|
|
/*
|
|
* Just use the generic probe stuff to call our CFI-specific
|
|
* chip_probe routine in all the possible permutations, etc.
|
|
*/
|
|
return mtd_do_chip_probe(map, &cfi_chip_probe);
|
|
}
|
|
|
|
static struct mtd_chip_driver cfi_chipdrv = {
|
|
.probe = cfi_probe,
|
|
.name = "cfi_probe",
|
|
.module = THIS_MODULE
|
|
};
|
|
|
|
static int __init cfi_probe_init(void)
|
|
{
|
|
register_mtd_chip_driver(&cfi_chipdrv);
|
|
return 0;
|
|
}
|
|
|
|
static void __exit cfi_probe_exit(void)
|
|
{
|
|
unregister_mtd_chip_driver(&cfi_chipdrv);
|
|
}
|
|
|
|
module_init(cfi_probe_init);
|
|
module_exit(cfi_probe_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org> et al.");
|
|
MODULE_DESCRIPTION("Probe code for CFI-compliant flash chips");
|