linux/arch/arm/mach-tegra/tegra.c
Stephen Warren 2f1d70af28 ARM: tegra: don't hard-code DEBUG_LL baud rate
Stop writing to the UART clock divider registers in the Tegra DEBUG_LL
code. This allows the DEBUG_LL output to use whatever baud rate was set
up by the bootloader. Some users are using higher rates than 115200.

This removes the only usage of tegra_uart_config[3], so reduce the size
allocated for that array.

Finally, fix busyuart() so that it only waits for THRE and not TEMT. For
some reason, TEMT doesn't get asserted (at least on Tegra30 Beaver) at
9600 baud, even though it does at 115200 baud. This sounds like a HW bug,
but I haven't investigated. For reference, U-Boot's serial code has
always only checked THRE, and not checked TEMT.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Paul Walmsley <pwalmsley@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-12-04 12:25:22 -07:00

191 lines
4.5 KiB
C

/*
* NVIDIA Tegra SoC device tree board support
*
* Copyright (C) 2011, 2013, NVIDIA Corporation
* Copyright (C) 2010 Secret Lab Technologies, Ltd.
* Copyright (C) 2010 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/irqdomain.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_fdt.h>
#include <linux/of_platform.h>
#include <linux/pda_power.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/sys_soc.h>
#include <linux/usb/tegra_usb_phy.h>
#include <linux/clk/tegra.h>
#include <linux/irqchip.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/setup.h>
#include "apbio.h"
#include "board.h"
#include "common.h"
#include "cpuidle.h"
#include "fuse.h"
#include "iomap.h"
#include "irq.h"
#include "pmc.h"
#include "pm.h"
#include "reset.h"
#include "sleep.h"
/*
* Storage for debug-macro.S's state.
*
* This must be in .data not .bss so that it gets initialized each time the
* kernel is loaded. The data is declared here rather than debug-macro.S so
* that multiple inclusions of debug-macro.S point at the same data.
*/
u32 tegra_uart_config[3] = {
/* Debug UART initialization required */
1,
/* Debug UART physical address */
0,
/* Debug UART virtual address */
0,
};
static void __init tegra_init_cache(void)
{
#ifdef CONFIG_CACHE_L2X0
int ret;
void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000;
u32 aux_ctrl, cache_type;
cache_type = readl(p + L2X0_CACHE_TYPE);
aux_ctrl = (cache_type & 0x700) << (17-8);
aux_ctrl |= 0x7C400001;
ret = l2x0_of_init(aux_ctrl, 0x8200c3fe);
if (!ret)
l2x0_saved_regs_addr = virt_to_phys(&l2x0_saved_regs);
#endif
}
static void __init tegra_init_early(void)
{
tegra_apb_io_init();
tegra_init_fuse();
tegra_cpu_reset_handler_init();
tegra_init_cache();
tegra_powergate_init();
tegra_hotplug_init();
}
static void __init tegra_dt_init_irq(void)
{
tegra_pmc_init_irq();
tegra_init_irq();
irqchip_init();
tegra_legacy_irq_syscore_init();
}
static void __init tegra_dt_init(void)
{
struct soc_device_attribute *soc_dev_attr;
struct soc_device *soc_dev;
struct device *parent = NULL;
tegra_pmc_init();
tegra_clocks_apply_init_table();
soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
if (!soc_dev_attr)
goto out;
soc_dev_attr->family = kasprintf(GFP_KERNEL, "Tegra");
soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%d", tegra_revision);
soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "%d", tegra_chip_id);
soc_dev = soc_device_register(soc_dev_attr);
if (IS_ERR(soc_dev)) {
kfree(soc_dev_attr->family);
kfree(soc_dev_attr->revision);
kfree(soc_dev_attr->soc_id);
kfree(soc_dev_attr);
goto out;
}
parent = soc_device_to_device(soc_dev);
/*
* Finished with the static registrations now; fill in the missing
* devices
*/
out:
of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
}
static void __init paz00_init(void)
{
if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
tegra_paz00_wifikill_init();
}
static struct {
char *machine;
void (*init)(void);
} board_init_funcs[] = {
{ "compal,paz00", paz00_init },
};
static void __init tegra_dt_init_late(void)
{
int i;
tegra_init_suspend();
tegra_cpuidle_init();
tegra_powergate_debugfs_init();
for (i = 0; i < ARRAY_SIZE(board_init_funcs); i++) {
if (of_machine_is_compatible(board_init_funcs[i].machine)) {
board_init_funcs[i].init();
break;
}
}
}
static const char * const tegra_dt_board_compat[] = {
"nvidia,tegra124",
"nvidia,tegra114",
"nvidia,tegra30",
"nvidia,tegra20",
NULL
};
DT_MACHINE_START(TEGRA_DT, "NVIDIA Tegra SoC (Flattened Device Tree)")
.map_io = tegra_map_common_io,
.smp = smp_ops(tegra_smp_ops),
.init_early = tegra_init_early,
.init_irq = tegra_dt_init_irq,
.init_machine = tegra_dt_init,
.init_late = tegra_dt_init_late,
.restart = tegra_pmc_restart,
.dt_compat = tegra_dt_board_compat,
MACHINE_END