linux/drivers/iio/adc/exynos_adc.c
Arnd Bergmann 2bb8ad9b44 iio: exynos-adc: add experimental touchscreen support
This adds support for the touchscreen on Samsung s3c64xx.
The driver is completely untested but shows roughly how
it could be done, following the example of the at91 driver.

compared to the old plat-samsung/adc driver, there is
no support for prioritizing ts over other clients, nor
for oversampling. From my reading of the code, the
priorities didn't actually have any effect at all, but
the oversampling might be needed.

Verifying this driver is the main issue that is currently
holding up multiplatform support for s3c64xx, so any help
in testing is very much appreciated.

The current version uses the IS_REACHABLE() that is
going to be introduced in the linux-media tree, please
comment this out for testing.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-01 21:50:25 +01:00

990 lines
24 KiB
C

/*
* exynos_adc.c - Support for ADC in EXYNOS SoCs
*
* 8 ~ 10 channel, 10/12-bit ADC
*
* Copyright (C) 2013 Naveen Krishna Chatradhi <ch.naveen@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/completion.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/regulator/consumer.h>
#include <linux/of_platform.h>
#include <linux/err.h>
#include <linux/input.h>
#include <linux/iio/iio.h>
#include <linux/iio/machine.h>
#include <linux/iio/driver.h>
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
/* S3C/EXYNOS4412/5250 ADC_V1 registers definitions */
#define ADC_V1_CON(x) ((x) + 0x00)
#define ADC_V1_TSC(x) ((x) + 0x04)
#define ADC_V1_DLY(x) ((x) + 0x08)
#define ADC_V1_DATX(x) ((x) + 0x0C)
#define ADC_V1_DATY(x) ((x) + 0x10)
#define ADC_V1_UPDN(x) ((x) + 0x14)
#define ADC_V1_INTCLR(x) ((x) + 0x18)
#define ADC_V1_MUX(x) ((x) + 0x1c)
#define ADC_V1_CLRINTPNDNUP(x) ((x) + 0x20)
/* S3C2410 ADC registers definitions */
#define ADC_S3C2410_MUX(x) ((x) + 0x18)
/* Future ADC_V2 registers definitions */
#define ADC_V2_CON1(x) ((x) + 0x00)
#define ADC_V2_CON2(x) ((x) + 0x04)
#define ADC_V2_STAT(x) ((x) + 0x08)
#define ADC_V2_INT_EN(x) ((x) + 0x10)
#define ADC_V2_INT_ST(x) ((x) + 0x14)
#define ADC_V2_VER(x) ((x) + 0x20)
/* Bit definitions for ADC_V1 */
#define ADC_V1_CON_RES (1u << 16)
#define ADC_V1_CON_PRSCEN (1u << 14)
#define ADC_V1_CON_PRSCLV(x) (((x) & 0xFF) << 6)
#define ADC_V1_CON_STANDBY (1u << 2)
/* Bit definitions for S3C2410 ADC */
#define ADC_S3C2410_CON_SELMUX(x) (((x) & 7) << 3)
#define ADC_S3C2410_DATX_MASK 0x3FF
#define ADC_S3C2416_CON_RES_SEL (1u << 3)
/* touch screen always uses channel 0 */
#define ADC_S3C2410_MUX_TS 0
/* ADCTSC Register Bits */
#define ADC_S3C2443_TSC_UD_SEN (1u << 8)
#define ADC_S3C2410_TSC_YM_SEN (1u << 7)
#define ADC_S3C2410_TSC_YP_SEN (1u << 6)
#define ADC_S3C2410_TSC_XM_SEN (1u << 5)
#define ADC_S3C2410_TSC_XP_SEN (1u << 4)
#define ADC_S3C2410_TSC_PULL_UP_DISABLE (1u << 3)
#define ADC_S3C2410_TSC_AUTO_PST (1u << 2)
#define ADC_S3C2410_TSC_XY_PST(x) (((x) & 0x3) << 0)
#define ADC_TSC_WAIT4INT (ADC_S3C2410_TSC_YM_SEN | \
ADC_S3C2410_TSC_YP_SEN | \
ADC_S3C2410_TSC_XP_SEN | \
ADC_S3C2410_TSC_XY_PST(3))
#define ADC_TSC_AUTOPST (ADC_S3C2410_TSC_YM_SEN | \
ADC_S3C2410_TSC_YP_SEN | \
ADC_S3C2410_TSC_XP_SEN | \
ADC_S3C2410_TSC_AUTO_PST | \
ADC_S3C2410_TSC_XY_PST(0))
/* Bit definitions for ADC_V2 */
#define ADC_V2_CON1_SOFT_RESET (1u << 2)
#define ADC_V2_CON2_OSEL (1u << 10)
#define ADC_V2_CON2_ESEL (1u << 9)
#define ADC_V2_CON2_HIGHF (1u << 8)
#define ADC_V2_CON2_C_TIME(x) (((x) & 7) << 4)
#define ADC_V2_CON2_ACH_SEL(x) (((x) & 0xF) << 0)
#define ADC_V2_CON2_ACH_MASK 0xF
#define MAX_ADC_V2_CHANNELS 10
#define MAX_ADC_V1_CHANNELS 8
#define MAX_EXYNOS3250_ADC_CHANNELS 2
/* Bit definitions common for ADC_V1 and ADC_V2 */
#define ADC_CON_EN_START (1u << 0)
#define ADC_CON_EN_START_MASK (0x3 << 0)
#define ADC_DATX_PRESSED (1u << 15)
#define ADC_DATX_MASK 0xFFF
#define ADC_DATY_MASK 0xFFF
#define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(100))
#define EXYNOS_ADCV1_PHY_OFFSET 0x0718
#define EXYNOS_ADCV2_PHY_OFFSET 0x0720
struct exynos_adc {
struct exynos_adc_data *data;
struct device *dev;
struct input_dev *input;
void __iomem *regs;
struct regmap *pmu_map;
struct clk *clk;
struct clk *sclk;
unsigned int irq;
unsigned int tsirq;
unsigned int delay;
struct regulator *vdd;
struct completion completion;
u32 value;
unsigned int version;
bool read_ts;
u32 ts_x;
u32 ts_y;
};
struct exynos_adc_data {
int num_channels;
bool needs_sclk;
bool needs_adc_phy;
int phy_offset;
u32 mask;
void (*init_hw)(struct exynos_adc *info);
void (*exit_hw)(struct exynos_adc *info);
void (*clear_irq)(struct exynos_adc *info);
void (*start_conv)(struct exynos_adc *info, unsigned long addr);
};
static void exynos_adc_unprepare_clk(struct exynos_adc *info)
{
if (info->data->needs_sclk)
clk_unprepare(info->sclk);
clk_unprepare(info->clk);
}
static int exynos_adc_prepare_clk(struct exynos_adc *info)
{
int ret;
ret = clk_prepare(info->clk);
if (ret) {
dev_err(info->dev, "failed preparing adc clock: %d\n", ret);
return ret;
}
if (info->data->needs_sclk) {
ret = clk_prepare(info->sclk);
if (ret) {
clk_unprepare(info->clk);
dev_err(info->dev,
"failed preparing sclk_adc clock: %d\n", ret);
return ret;
}
}
return 0;
}
static void exynos_adc_disable_clk(struct exynos_adc *info)
{
if (info->data->needs_sclk)
clk_disable(info->sclk);
clk_disable(info->clk);
}
static int exynos_adc_enable_clk(struct exynos_adc *info)
{
int ret;
ret = clk_enable(info->clk);
if (ret) {
dev_err(info->dev, "failed enabling adc clock: %d\n", ret);
return ret;
}
if (info->data->needs_sclk) {
ret = clk_enable(info->sclk);
if (ret) {
clk_disable(info->clk);
dev_err(info->dev,
"failed enabling sclk_adc clock: %d\n", ret);
return ret;
}
}
return 0;
}
static void exynos_adc_v1_init_hw(struct exynos_adc *info)
{
u32 con1;
if (info->data->needs_adc_phy)
regmap_write(info->pmu_map, info->data->phy_offset, 1);
/* set default prescaler values and Enable prescaler */
con1 = ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN;
/* Enable 12-bit ADC resolution */
con1 |= ADC_V1_CON_RES;
writel(con1, ADC_V1_CON(info->regs));
/* set touchscreen delay */
writel(info->delay, ADC_V1_DLY(info->regs));
}
static void exynos_adc_v1_exit_hw(struct exynos_adc *info)
{
u32 con;
if (info->data->needs_adc_phy)
regmap_write(info->pmu_map, info->data->phy_offset, 0);
con = readl(ADC_V1_CON(info->regs));
con |= ADC_V1_CON_STANDBY;
writel(con, ADC_V1_CON(info->regs));
}
static void exynos_adc_v1_clear_irq(struct exynos_adc *info)
{
writel(1, ADC_V1_INTCLR(info->regs));
}
static void exynos_adc_v1_start_conv(struct exynos_adc *info,
unsigned long addr)
{
u32 con1;
writel(addr, ADC_V1_MUX(info->regs));
con1 = readl(ADC_V1_CON(info->regs));
writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
}
static const struct exynos_adc_data exynos_adc_v1_data = {
.num_channels = MAX_ADC_V1_CHANNELS,
.mask = ADC_DATX_MASK, /* 12 bit ADC resolution */
.needs_adc_phy = true,
.phy_offset = EXYNOS_ADCV1_PHY_OFFSET,
.init_hw = exynos_adc_v1_init_hw,
.exit_hw = exynos_adc_v1_exit_hw,
.clear_irq = exynos_adc_v1_clear_irq,
.start_conv = exynos_adc_v1_start_conv,
};
static void exynos_adc_s3c2416_start_conv(struct exynos_adc *info,
unsigned long addr)
{
u32 con1;
/* Enable 12 bit ADC resolution */
con1 = readl(ADC_V1_CON(info->regs));
con1 |= ADC_S3C2416_CON_RES_SEL;
writel(con1, ADC_V1_CON(info->regs));
/* Select channel for S3C2416 */
writel(addr, ADC_S3C2410_MUX(info->regs));
con1 = readl(ADC_V1_CON(info->regs));
writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
}
static struct exynos_adc_data const exynos_adc_s3c2416_data = {
.num_channels = MAX_ADC_V1_CHANNELS,
.mask = ADC_DATX_MASK, /* 12 bit ADC resolution */
.init_hw = exynos_adc_v1_init_hw,
.exit_hw = exynos_adc_v1_exit_hw,
.start_conv = exynos_adc_s3c2416_start_conv,
};
static void exynos_adc_s3c2443_start_conv(struct exynos_adc *info,
unsigned long addr)
{
u32 con1;
/* Select channel for S3C2433 */
writel(addr, ADC_S3C2410_MUX(info->regs));
con1 = readl(ADC_V1_CON(info->regs));
writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
}
static struct exynos_adc_data const exynos_adc_s3c2443_data = {
.num_channels = MAX_ADC_V1_CHANNELS,
.mask = ADC_S3C2410_DATX_MASK, /* 10 bit ADC resolution */
.init_hw = exynos_adc_v1_init_hw,
.exit_hw = exynos_adc_v1_exit_hw,
.start_conv = exynos_adc_s3c2443_start_conv,
};
static void exynos_adc_s3c64xx_start_conv(struct exynos_adc *info,
unsigned long addr)
{
u32 con1;
con1 = readl(ADC_V1_CON(info->regs));
con1 &= ~ADC_S3C2410_CON_SELMUX(0x7);
con1 |= ADC_S3C2410_CON_SELMUX(addr);
writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
}
static struct exynos_adc_data const exynos_adc_s3c24xx_data = {
.num_channels = MAX_ADC_V1_CHANNELS,
.mask = ADC_S3C2410_DATX_MASK, /* 10 bit ADC resolution */
.init_hw = exynos_adc_v1_init_hw,
.exit_hw = exynos_adc_v1_exit_hw,
.start_conv = exynos_adc_s3c64xx_start_conv,
};
static struct exynos_adc_data const exynos_adc_s3c64xx_data = {
.num_channels = MAX_ADC_V1_CHANNELS,
.mask = ADC_DATX_MASK, /* 12 bit ADC resolution */
.init_hw = exynos_adc_v1_init_hw,
.exit_hw = exynos_adc_v1_exit_hw,
.clear_irq = exynos_adc_v1_clear_irq,
.start_conv = exynos_adc_s3c64xx_start_conv,
};
static void exynos_adc_v2_init_hw(struct exynos_adc *info)
{
u32 con1, con2;
if (info->data->needs_adc_phy)
regmap_write(info->pmu_map, info->data->phy_offset, 1);
con1 = ADC_V2_CON1_SOFT_RESET;
writel(con1, ADC_V2_CON1(info->regs));
con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL |
ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0);
writel(con2, ADC_V2_CON2(info->regs));
/* Enable interrupts */
writel(1, ADC_V2_INT_EN(info->regs));
}
static void exynos_adc_v2_exit_hw(struct exynos_adc *info)
{
u32 con;
if (info->data->needs_adc_phy)
regmap_write(info->pmu_map, info->data->phy_offset, 0);
con = readl(ADC_V2_CON1(info->regs));
con &= ~ADC_CON_EN_START;
writel(con, ADC_V2_CON1(info->regs));
}
static void exynos_adc_v2_clear_irq(struct exynos_adc *info)
{
writel(1, ADC_V2_INT_ST(info->regs));
}
static void exynos_adc_v2_start_conv(struct exynos_adc *info,
unsigned long addr)
{
u32 con1, con2;
con2 = readl(ADC_V2_CON2(info->regs));
con2 &= ~ADC_V2_CON2_ACH_MASK;
con2 |= ADC_V2_CON2_ACH_SEL(addr);
writel(con2, ADC_V2_CON2(info->regs));
con1 = readl(ADC_V2_CON1(info->regs));
writel(con1 | ADC_CON_EN_START, ADC_V2_CON1(info->regs));
}
static const struct exynos_adc_data exynos_adc_v2_data = {
.num_channels = MAX_ADC_V2_CHANNELS,
.mask = ADC_DATX_MASK, /* 12 bit ADC resolution */
.needs_adc_phy = true,
.phy_offset = EXYNOS_ADCV2_PHY_OFFSET,
.init_hw = exynos_adc_v2_init_hw,
.exit_hw = exynos_adc_v2_exit_hw,
.clear_irq = exynos_adc_v2_clear_irq,
.start_conv = exynos_adc_v2_start_conv,
};
static const struct exynos_adc_data exynos3250_adc_data = {
.num_channels = MAX_EXYNOS3250_ADC_CHANNELS,
.mask = ADC_DATX_MASK, /* 12 bit ADC resolution */
.needs_sclk = true,
.needs_adc_phy = true,
.phy_offset = EXYNOS_ADCV1_PHY_OFFSET,
.init_hw = exynos_adc_v2_init_hw,
.exit_hw = exynos_adc_v2_exit_hw,
.clear_irq = exynos_adc_v2_clear_irq,
.start_conv = exynos_adc_v2_start_conv,
};
static void exynos_adc_exynos7_init_hw(struct exynos_adc *info)
{
u32 con1, con2;
if (info->data->needs_adc_phy)
regmap_write(info->pmu_map, info->data->phy_offset, 1);
con1 = ADC_V2_CON1_SOFT_RESET;
writel(con1, ADC_V2_CON1(info->regs));
con2 = readl(ADC_V2_CON2(info->regs));
con2 &= ~ADC_V2_CON2_C_TIME(7);
con2 |= ADC_V2_CON2_C_TIME(0);
writel(con2, ADC_V2_CON2(info->regs));
/* Enable interrupts */
writel(1, ADC_V2_INT_EN(info->regs));
}
static const struct exynos_adc_data exynos7_adc_data = {
.num_channels = MAX_ADC_V1_CHANNELS,
.mask = ADC_DATX_MASK, /* 12 bit ADC resolution */
.init_hw = exynos_adc_exynos7_init_hw,
.exit_hw = exynos_adc_v2_exit_hw,
.clear_irq = exynos_adc_v2_clear_irq,
.start_conv = exynos_adc_v2_start_conv,
};
static const struct of_device_id exynos_adc_match[] = {
{
.compatible = "samsung,s3c2410-adc",
.data = &exynos_adc_s3c24xx_data,
}, {
.compatible = "samsung,s3c2416-adc",
.data = &exynos_adc_s3c2416_data,
}, {
.compatible = "samsung,s3c2440-adc",
.data = &exynos_adc_s3c24xx_data,
}, {
.compatible = "samsung,s3c2443-adc",
.data = &exynos_adc_s3c2443_data,
}, {
.compatible = "samsung,s3c6410-adc",
.data = &exynos_adc_s3c64xx_data,
}, {
.compatible = "samsung,exynos-adc-v1",
.data = &exynos_adc_v1_data,
}, {
.compatible = "samsung,exynos-adc-v2",
.data = &exynos_adc_v2_data,
}, {
.compatible = "samsung,exynos3250-adc",
.data = &exynos3250_adc_data,
}, {
.compatible = "samsung,exynos7-adc",
.data = &exynos7_adc_data,
},
{},
};
MODULE_DEVICE_TABLE(of, exynos_adc_match);
static struct exynos_adc_data *exynos_adc_get_data(struct platform_device *pdev)
{
const struct of_device_id *match;
match = of_match_node(exynos_adc_match, pdev->dev.of_node);
return (struct exynos_adc_data *)match->data;
}
static int exynos_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val,
int *val2,
long mask)
{
struct exynos_adc *info = iio_priv(indio_dev);
unsigned long timeout;
int ret;
if (mask != IIO_CHAN_INFO_RAW)
return -EINVAL;
mutex_lock(&indio_dev->mlock);
reinit_completion(&info->completion);
/* Select the channel to be used and Trigger conversion */
if (info->data->start_conv)
info->data->start_conv(info, chan->address);
timeout = wait_for_completion_timeout(&info->completion,
EXYNOS_ADC_TIMEOUT);
if (timeout == 0) {
dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n");
if (info->data->init_hw)
info->data->init_hw(info);
ret = -ETIMEDOUT;
} else {
*val = info->value;
*val2 = 0;
ret = IIO_VAL_INT;
}
mutex_unlock(&indio_dev->mlock);
return ret;
}
static int exynos_read_s3c64xx_ts(struct iio_dev *indio_dev, int *x, int *y)
{
struct exynos_adc *info = iio_priv(indio_dev);
unsigned long timeout;
int ret;
mutex_lock(&indio_dev->mlock);
info->read_ts = true;
reinit_completion(&info->completion);
writel(ADC_S3C2410_TSC_PULL_UP_DISABLE | ADC_TSC_AUTOPST,
ADC_V1_TSC(info->regs));
/* Select the ts channel to be used and Trigger conversion */
info->data->start_conv(info, ADC_S3C2410_MUX_TS);
timeout = wait_for_completion_timeout(&info->completion,
EXYNOS_ADC_TIMEOUT);
if (timeout == 0) {
dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n");
if (info->data->init_hw)
info->data->init_hw(info);
ret = -ETIMEDOUT;
} else {
*x = info->ts_x;
*y = info->ts_y;
ret = 0;
}
info->read_ts = false;
mutex_unlock(&indio_dev->mlock);
return ret;
}
static irqreturn_t exynos_adc_isr(int irq, void *dev_id)
{
struct exynos_adc *info = (struct exynos_adc *)dev_id;
u32 mask = info->data->mask;
/* Read value */
if (info->read_ts) {
info->ts_x = readl(ADC_V1_DATX(info->regs));
info->ts_y = readl(ADC_V1_DATY(info->regs));
writel(ADC_TSC_WAIT4INT | ADC_S3C2443_TSC_UD_SEN, ADC_V1_TSC(info->regs));
} else {
info->value = readl(ADC_V1_DATX(info->regs)) & mask;
}
/* clear irq */
if (info->data->clear_irq)
info->data->clear_irq(info);
complete(&info->completion);
return IRQ_HANDLED;
}
/*
* Here we (ab)use a threaded interrupt handler to stay running
* for as long as the touchscreen remains pressed, we report
* a new event with the latest data and then sleep until the
* next timer tick. This mirrors the behavior of the old
* driver, with much less code.
*/
static irqreturn_t exynos_ts_isr(int irq, void *dev_id)
{
struct exynos_adc *info = dev_id;
struct iio_dev *dev = dev_get_drvdata(info->dev);
u32 x, y;
bool pressed;
int ret;
while (info->input->users) {
ret = exynos_read_s3c64xx_ts(dev, &x, &y);
if (ret == -ETIMEDOUT)
break;
pressed = x & y & ADC_DATX_PRESSED;
if (!pressed) {
input_report_key(info->input, BTN_TOUCH, 0);
input_sync(info->input);
break;
}
input_report_abs(info->input, ABS_X, x & ADC_DATX_MASK);
input_report_abs(info->input, ABS_Y, y & ADC_DATY_MASK);
input_report_key(info->input, BTN_TOUCH, 1);
input_sync(info->input);
msleep(1);
};
writel(0, ADC_V1_CLRINTPNDNUP(info->regs));
return IRQ_HANDLED;
}
static int exynos_adc_reg_access(struct iio_dev *indio_dev,
unsigned reg, unsigned writeval,
unsigned *readval)
{
struct exynos_adc *info = iio_priv(indio_dev);
if (readval == NULL)
return -EINVAL;
*readval = readl(info->regs + reg);
return 0;
}
static const struct iio_info exynos_adc_iio_info = {
.read_raw = &exynos_read_raw,
.debugfs_reg_access = &exynos_adc_reg_access,
.driver_module = THIS_MODULE,
};
#define ADC_CHANNEL(_index, _id) { \
.type = IIO_VOLTAGE, \
.indexed = 1, \
.channel = _index, \
.address = _index, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.datasheet_name = _id, \
}
static const struct iio_chan_spec exynos_adc_iio_channels[] = {
ADC_CHANNEL(0, "adc0"),
ADC_CHANNEL(1, "adc1"),
ADC_CHANNEL(2, "adc2"),
ADC_CHANNEL(3, "adc3"),
ADC_CHANNEL(4, "adc4"),
ADC_CHANNEL(5, "adc5"),
ADC_CHANNEL(6, "adc6"),
ADC_CHANNEL(7, "adc7"),
ADC_CHANNEL(8, "adc8"),
ADC_CHANNEL(9, "adc9"),
};
static int exynos_adc_remove_devices(struct device *dev, void *c)
{
struct platform_device *pdev = to_platform_device(dev);
platform_device_unregister(pdev);
return 0;
}
static int exynos_adc_ts_open(struct input_dev *dev)
{
struct exynos_adc *info = input_get_drvdata(dev);
enable_irq(info->tsirq);
return 0;
}
static void exynos_adc_ts_close(struct input_dev *dev)
{
struct exynos_adc *info = input_get_drvdata(dev);
disable_irq(info->tsirq);
}
static int exynos_adc_ts_init(struct exynos_adc *info)
{
int ret;
if (info->tsirq <= 0)
return -ENODEV;
info->input = input_allocate_device();
if (!info->input)
return -ENOMEM;
info->input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
info->input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
input_set_abs_params(info->input, ABS_X, 0, 0x3FF, 0, 0);
input_set_abs_params(info->input, ABS_Y, 0, 0x3FF, 0, 0);
info->input->name = "S3C24xx TouchScreen";
info->input->id.bustype = BUS_HOST;
info->input->open = exynos_adc_ts_open;
info->input->close = exynos_adc_ts_close;
input_set_drvdata(info->input, info);
ret = input_register_device(info->input);
if (ret) {
input_free_device(info->input);
return ret;
}
disable_irq(info->tsirq);
ret = request_threaded_irq(info->tsirq, NULL, exynos_ts_isr,
0, "touchscreen", info);
if (ret)
input_unregister_device(info->input);
return ret;
}
static int exynos_adc_probe(struct platform_device *pdev)
{
struct exynos_adc *info = NULL;
struct device_node *np = pdev->dev.of_node;
struct s3c2410_ts_mach_info *pdata = dev_get_platdata(&pdev->dev);
struct iio_dev *indio_dev = NULL;
struct resource *mem;
bool has_ts = false;
int ret = -ENODEV;
int irq;
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct exynos_adc));
if (!indio_dev) {
dev_err(&pdev->dev, "failed allocating iio device\n");
return -ENOMEM;
}
info = iio_priv(indio_dev);
info->data = exynos_adc_get_data(pdev);
if (!info->data) {
dev_err(&pdev->dev, "failed getting exynos_adc_data\n");
return -EINVAL;
}
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
info->regs = devm_ioremap_resource(&pdev->dev, mem);
if (IS_ERR(info->regs))
return PTR_ERR(info->regs);
if (info->data->needs_adc_phy) {
info->pmu_map = syscon_regmap_lookup_by_phandle(
pdev->dev.of_node,
"samsung,syscon-phandle");
if (IS_ERR(info->pmu_map)) {
dev_err(&pdev->dev, "syscon regmap lookup failed.\n");
return PTR_ERR(info->pmu_map);
}
}
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "no irq resource?\n");
return irq;
}
info->irq = irq;
irq = platform_get_irq(pdev, 1);
if (irq == -EPROBE_DEFER)
return irq;
info->tsirq = irq;
info->dev = &pdev->dev;
init_completion(&info->completion);
info->clk = devm_clk_get(&pdev->dev, "adc");
if (IS_ERR(info->clk)) {
dev_err(&pdev->dev, "failed getting clock, err = %ld\n",
PTR_ERR(info->clk));
return PTR_ERR(info->clk);
}
if (info->data->needs_sclk) {
info->sclk = devm_clk_get(&pdev->dev, "sclk");
if (IS_ERR(info->sclk)) {
dev_err(&pdev->dev,
"failed getting sclk clock, err = %ld\n",
PTR_ERR(info->sclk));
return PTR_ERR(info->sclk);
}
}
info->vdd = devm_regulator_get(&pdev->dev, "vdd");
if (IS_ERR(info->vdd)) {
dev_err(&pdev->dev, "failed getting regulator, err = %ld\n",
PTR_ERR(info->vdd));
return PTR_ERR(info->vdd);
}
ret = regulator_enable(info->vdd);
if (ret)
return ret;
ret = exynos_adc_prepare_clk(info);
if (ret)
goto err_disable_reg;
ret = exynos_adc_enable_clk(info);
if (ret)
goto err_unprepare_clk;
platform_set_drvdata(pdev, indio_dev);
indio_dev->name = dev_name(&pdev->dev);
indio_dev->dev.parent = &pdev->dev;
indio_dev->dev.of_node = pdev->dev.of_node;
indio_dev->info = &exynos_adc_iio_info;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = exynos_adc_iio_channels;
indio_dev->num_channels = info->data->num_channels;
ret = request_irq(info->irq, exynos_adc_isr,
0, dev_name(&pdev->dev), info);
if (ret < 0) {
dev_err(&pdev->dev, "failed requesting irq, irq = %d\n",
info->irq);
goto err_disable_clk;
}
ret = iio_device_register(indio_dev);
if (ret)
goto err_irq;
if (info->data->init_hw)
info->data->init_hw(info);
/* leave out any TS related code if unreachable */
if (IS_REACHABLE(CONFIG_INPUT)) {
has_ts = of_property_read_bool(pdev->dev.of_node,
"has-touchscreen") || pdata;
}
if (pdata)
info->delay = pdata->delay;
else
info->delay = 10000;
if (has_ts)
ret = exynos_adc_ts_init(info);
if (ret)
goto err_iio;
ret = of_platform_populate(np, exynos_adc_match, NULL, &indio_dev->dev);
if (ret < 0) {
dev_err(&pdev->dev, "failed adding child nodes\n");
goto err_of_populate;
}
return 0;
err_of_populate:
device_for_each_child(&indio_dev->dev, NULL,
exynos_adc_remove_devices);
if (has_ts) {
input_unregister_device(info->input);
free_irq(info->tsirq, info);
}
err_iio:
iio_device_unregister(indio_dev);
err_irq:
free_irq(info->irq, info);
err_disable_clk:
if (info->data->exit_hw)
info->data->exit_hw(info);
exynos_adc_disable_clk(info);
err_unprepare_clk:
exynos_adc_unprepare_clk(info);
err_disable_reg:
regulator_disable(info->vdd);
return ret;
}
static int exynos_adc_remove(struct platform_device *pdev)
{
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct exynos_adc *info = iio_priv(indio_dev);
if (IS_REACHABLE(CONFIG_INPUT)) {
free_irq(info->tsirq, info);
input_unregister_device(info->input);
}
device_for_each_child(&indio_dev->dev, NULL,
exynos_adc_remove_devices);
iio_device_unregister(indio_dev);
free_irq(info->irq, info);
if (info->data->exit_hw)
info->data->exit_hw(info);
exynos_adc_disable_clk(info);
exynos_adc_unprepare_clk(info);
regulator_disable(info->vdd);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int exynos_adc_suspend(struct device *dev)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct exynos_adc *info = iio_priv(indio_dev);
if (info->data->exit_hw)
info->data->exit_hw(info);
exynos_adc_disable_clk(info);
regulator_disable(info->vdd);
return 0;
}
static int exynos_adc_resume(struct device *dev)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct exynos_adc *info = iio_priv(indio_dev);
int ret;
ret = regulator_enable(info->vdd);
if (ret)
return ret;
ret = exynos_adc_enable_clk(info);
if (ret)
return ret;
if (info->data->init_hw)
info->data->init_hw(info);
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(exynos_adc_pm_ops,
exynos_adc_suspend,
exynos_adc_resume);
static struct platform_driver exynos_adc_driver = {
.probe = exynos_adc_probe,
.remove = exynos_adc_remove,
.driver = {
.name = "exynos-adc",
.of_match_table = exynos_adc_match,
.pm = &exynos_adc_pm_ops,
},
};
module_platform_driver(exynos_adc_driver);
MODULE_AUTHOR("Naveen Krishna Chatradhi <ch.naveen@samsung.com>");
MODULE_DESCRIPTION("Samsung EXYNOS5 ADC driver");
MODULE_LICENSE("GPL v2");