Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-12-02 17:11:33 +00:00
Code Issues Packages Projects Releases Wiki Activity
2b1caf6ed7
linux/arch/powerpc/boot/dts/p1021mds.dts
Anton Vorontsov dee9ad718b powerpc/85xx: Fix booting for P1021MDS boards 
P1021 processors have no dedicated ROM to store the QE microcode,
so the fimrware is stored externally, and it is U-Boot responsibility
to load it. It might be that the board is booting without QE, e.g.
currently U-Boot doesn't support QE for P1021MDS boards, which means
that QE isn't initialized, and so the board hangs early at boot.

This patch fixes the issue by marking QE as disabled and checking the
state in the probing code. U-Boot should fixup the state if it
initialized the QE.

Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-08-04 14:16:01 -05:00

700 lines
16 KiB
Plaintext
Raw Blame History

/*
* P1021 MDS Device Tree Source
*
* Copyright 2010 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/dts-v1/;
/ {
model = "fsl,P1021";
compatible = "fsl,P1021MDS";
#address-cells = <2>;
#size-cells = <2>;
aliases {
serial0 = &serial0;
serial1 = &serial1;
ethernet0 = &enet0;
ethernet1 = &enet1;
ethernet2 = &enet2;
ethernet3 = &enet3;
ethernet4 = &enet4;
pci0 = &pci0;
pci1 = &pci1;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,P1021@0 {
device_type = "cpu";
reg = <0x0>;
next-level-cache = <&L2>;
};
PowerPC,P1021@1 {
device_type = "cpu";
reg = <0x1>;
next-level-cache = <&L2>;
};
};
memory {
device_type = "memory";
};
localbus@ffe05000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus";
reg = <0 0xffe05000 0 0x1000>;
interrupts = <19 2>;
interrupt-parent = <&mpic>;
/* NAND Flash, BCSR, PMC0/1*/
ranges = <0x0 0x0 0x0 0xfc000000 0x02000000
0x1 0x0 0x0 0xf8000000 0x00008000
0x2 0x0 0x0 0xf8010000 0x00020000
0x3 0x0 0x0 0xf8020000 0x00020000>;
nand@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,p1021-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x0 0x0 0x40000>;
partition@0 {
/* This location must not be altered */
/* 1MB for u-boot Bootloader Image */
reg = <0x0 0x00100000>;
label = "NAND (RO) U-Boot Image";
read-only;
};
partition@100000 {
/* 1MB for DTB Image */
reg = <0x00100000 0x00100000>;
label = "NAND (RO) DTB Image";
read-only;
};
partition@200000 {
/* 4MB for Linux Kernel Image */
reg = <0x00200000 0x00400000>;
label = "NAND (RO) Linux Kernel Image";
read-only;
};
partition@600000 {
/* 5MB for Compressed Root file System Image */
reg = <0x00600000 0x00500000>;
label = "NAND (RO) Compressed RFS Image";
read-only;
};
partition@b00000 {
/* 6MB for JFFS2 based Root file System */
reg = <0x00a00000 0x00600000>;
label = "NAND (RW) JFFS2 Root File System";
};
partition@1100000 {
/* 14MB for JFFS2 based Root file System */
reg = <0x01100000 0x00e00000>;
label = "NAND (RW) Writable User area";
};
partition@1f00000 {
/* 1MB for microcode */
reg = <0x01f00000 0x00100000>;
label = "NAND (RO) QE Ucode";
read-only;
};
};
bcsr@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,p1021mds-bcsr";
reg = <1 0 0x8000>;
ranges = <0 1 0 0x8000>;
};
pib@2,0 {
compatible = "fsl,p1021mds-pib";
reg = <2 0 0x10000>;
};
pib@3,0 {
compatible = "fsl,p1021mds-pib";
reg = <3 0 0x10000>;
};
};
soc@ffe00000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,p1021-immr", "simple-bus";
ranges = <0x0 0x0 0xffe00000 0x100000>;
bus-frequency = <0>; // Filled out by uboot.
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <12>;
};
ecm@1000 {
compatible = "fsl,p1021-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <16 2>;
interrupt-parent = <&mpic>;
};
memory-controller@2000 {
compatible = "fsl,p1021-memory-controller";
reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <16 2>;
};
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
rtc@68 {
compatible = "dallas,ds1374";
reg = <0x68>;
};
};
i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
spi@7000 {
cell-index = <0>;
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,espi";
reg = <0x7000 0x1000>;
interrupts = <59 0x2>;
interrupt-parent = <&mpic>;
espi,num-ss-bits = <4>;
mode = "cpu";
fsl_m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,espi-flash";
reg = <0>;
linux,modalias = "fsl_m25p80";
spi-max-frequency = <40000000>; /* input clock */
partition@u-boot {
label = "u-boot-spi";
reg = <0x00000000 0x00100000>;
read-only;
};
partition@kernel {
label = "kernel-spi";
reg = <0x00100000 0x00500000>;
read-only;
};
partition@dtb {
label = "dtb-spi";
reg = <0x00600000 0x00100000>;
read-only;
};
partition@fs {
label = "file system-spi";
reg = <0x00700000 0x00900000>;
};
};
};
gpio: gpio-controller@f000 {
#gpio-cells = <2>;
compatible = "fsl,mpc8572-gpio";
reg = <0xf000 0x100>;
interrupts = <47 0x2>;
interrupt-parent = <&mpic>;
gpio-controller;
};
L2: l2-cache-controller@20000 {
compatible = "fsl,p1021-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x40000>; // L2,256K
interrupt-parent = <&mpic>;
interrupts = <16 2>;
};
dma@21300 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,eloplus-dma";
reg = <0x21300 0x4>;
ranges = <0x0 0x21100 0x200>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
interrupt-parent = <&mpic>;
interrupts = <20 2>;
};
dma-channel@80 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
interrupt-parent = <&mpic>;
interrupts = <21 2>;
};
dma-channel@100 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
interrupt-parent = <&mpic>;
interrupts = <22 2>;
};
dma-channel@180 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
interrupt-parent = <&mpic>;
interrupts = <23 2>;
};
};
usb@22000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl-usb2-dr";
reg = <0x22000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <28 0x2>;
phy_type = "ulpi";
};
mdio@24000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,etsec2-mdio";
reg = <0x24000 0x1000 0xb0030 0x4>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <1 1>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
reg = <0x1>;
};
phy4: ethernet-phy@4 {
interrupt-parent = <&mpic>;
reg = <0x4>;
};
};
mdio@25000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,etsec2-tbi";
reg = <0x25000 0x1000 0xb1030 0x4>;
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@B0000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "fsl,etsec2";
fsl,num_rx_queues = <0x8>;
fsl,num_tx_queues = <0x8>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
queue-group@0{
#address-cells = <1>;
#size-cells = <1>;
reg = <0xB0000 0x1000>;
interrupts = <29 2 30 2 34 2>;
};
queue-group@1{
#address-cells = <1>;
#size-cells = <1>;
reg = <0xB4000 0x1000>;
interrupts = <17 2 18 2 24 2>;
};
};
enet1: ethernet@B1000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "fsl,etsec2";
fsl,num_rx_queues = <0x8>;
fsl,num_tx_queues = <0x8>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupt-parent = <&mpic>;
phy-handle = <&phy4>;
tbi-handle = <&tbi0>;
phy-connection-type = "sgmii";
queue-group@0{
#address-cells = <1>;
#size-cells = <1>;
reg = <0xB1000 0x1000>;
interrupts = <35 2 36 2 40 2>;
};
queue-group@1{
#address-cells = <1>;
#size-cells = <1>;
reg = <0xB5000 0x1000>;
interrupts = <51 2 52 2 67 2>;
};
};
enet2: ethernet@B2000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "fsl,etsec2";
fsl,num_rx_queues = <0x8>;
fsl,num_tx_queues = <0x8>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
queue-group@0{
#address-cells = <1>;
#size-cells = <1>;
reg = <0xB2000 0x1000>;
interrupts = <31 2 32 2 33 2>;
};
queue-group@1{
#address-cells = <1>;
#size-cells = <1>;
reg = <0xB6000 0x1000>;
interrupts = <25 2 26 2 27 2>;
};
};
sdhci@2e000 {
compatible = "fsl,p1021-esdhc", "fsl,esdhc";
reg = <0x2e000 0x1000>;
interrupts = <72 0x2>;
interrupt-parent = <&mpic>;
/* Filled in by U-Boot */
clock-frequency = <0>;
};
crypto@30000 {
compatible = "fsl,sec3.3", "fsl,sec3.1",
"fsl,sec3.0", "fsl,sec2.4",
"fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <45 2 58 2>;
interrupt-parent = <&mpic>;
fsl,num-channels = <4>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x97c>;
fsl,descriptor-types-mask = <0x3a30abf>;
};
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
};
msi@41600 {
compatible = "fsl,p1021-msi", "fsl,mpic-msi";
reg = <0x41600 0x80>;
msi-available-ranges = <0 0x100>;
interrupts = <
0xe0 0
0xe1 0
0xe2 0
0xe3 0
0xe4 0
0xe5 0
0xe6 0
0xe7 0>;
interrupt-parent = <&mpic>;
};
global-utilities@e0000 { //global utilities block
compatible = "fsl,p1021-guts";
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
par_io@e0100 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xe0100 0x60>;
ranges = <0x0 0xe0100 0x60>;
device_type = "par_io";
num-ports = <3>;
pio1: ucc_pin@01 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */
0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */
0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9
*/
0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */
0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */
0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */
0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */
0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */
0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */
0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */
0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */
0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */
0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */
0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */
0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */
0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */
0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */
};
pio2: ucc_pin@02 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */
0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */
0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */
0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */
0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */
0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */
0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */
0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */
0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */
};
};
};
pci0: pcie@ffe09000 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0 0xffe09000 0 0x1000>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <16 2>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 4 1
0000 0 0 2 &mpic 5 1
0000 0 0 3 &mpic 6 1
0000 0 0 4 &mpic 7 1
>;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@ffe0a000 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0 0xffe0a000 0 0x1000>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <16 2>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 0 1
0000 0 0 2 &mpic 1 1
0000 0 0 3 &mpic 2 1
0000 0 0 4 &mpic 3 1
>;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
qe@ffe80000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "qe";
compatible = "fsl,qe";
ranges = <0x0 0x0 0xffe80000 0x40000>;
reg = <0 0xffe80000 0 0x480>;
brg-frequency = <0>;
bus-frequency = <0>;
fsl,qe-num-riscs = <1>;
fsl,qe-num-snums = <28>;
status = "disabled"; /* no firmware loaded */
qeic: interrupt-controller@80 {
interrupt-controller;
compatible = "fsl,qe-ic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <0x80 0x80>;
interrupts = <63 2 60 2>; //high:47 low:44
interrupt-parent = <&mpic>;
};
enet3: ucc@2000 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <1>;
reg = <0x2000 0x200>;
interrupts = <32>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "clk12";
tx-clock-name = "clk9";
pio-handle = <&pio1>;
phy-handle = <&qe_phy0>;
phy-connection-type = "mii";
};
mdio@2120 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2120 0x18>;
compatible = "fsl,ucc-mdio";
qe_phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <4 1>;
reg = <0x0>;
device_type = "ethernet-phy";
};
qe_phy1: ethernet-phy@03 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet4: ucc@2400 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <5>;
reg = <0x2400 0x200>;
interrupts = <40>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk13";
pio-handle = <&pio2>;
phy-handle = <&qe_phy1>;
phy-connection-type = "rmii";
};
muram@10000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,qe-muram", "fsl,cpm-muram";
ranges = <0x0 0x10000 0x6000>;
data-only@0 {
compatible = "fsl,qe-muram-data",
"fsl,cpm-muram-data";
reg = <0x0 0x6000>;
};
};
};
};
Reference in New Issue View Git Blame Copy Permalink