linux/net/bridge/br_if.c
Jiri Pirko 29bf24afb2 net: add possibility to pass information about upper device via notifier
Sometimes the drivers and other code would find it handy to know some
internal information about upper device being changed. So allow upper-code
to pass information down to notifier listeners during linking.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 11:49:25 -05:00

591 lines
13 KiB
C

/*
* Userspace interface
* Linux ethernet bridge
*
* Authors:
* Lennert Buytenhek <buytenh@gnu.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/netpoll.h>
#include <linux/ethtool.h>
#include <linux/if_arp.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/rtnetlink.h>
#include <linux/if_ether.h>
#include <linux/slab.h>
#include <net/sock.h>
#include <linux/if_vlan.h>
#include <net/switchdev.h>
#include "br_private.h"
/*
* Determine initial path cost based on speed.
* using recommendations from 802.1d standard
*
* Since driver might sleep need to not be holding any locks.
*/
static int port_cost(struct net_device *dev)
{
struct ethtool_cmd ecmd;
if (!__ethtool_get_settings(dev, &ecmd)) {
switch (ethtool_cmd_speed(&ecmd)) {
case SPEED_10000:
return 2;
case SPEED_1000:
return 4;
case SPEED_100:
return 19;
case SPEED_10:
return 100;
}
}
/* Old silly heuristics based on name */
if (!strncmp(dev->name, "lec", 3))
return 7;
if (!strncmp(dev->name, "plip", 4))
return 2500;
return 100; /* assume old 10Mbps */
}
/* Check for port carrier transitions. */
void br_port_carrier_check(struct net_bridge_port *p)
{
struct net_device *dev = p->dev;
struct net_bridge *br = p->br;
if (!(p->flags & BR_ADMIN_COST) &&
netif_running(dev) && netif_oper_up(dev))
p->path_cost = port_cost(dev);
if (!netif_running(br->dev))
return;
spin_lock_bh(&br->lock);
if (netif_running(dev) && netif_oper_up(dev)) {
if (p->state == BR_STATE_DISABLED)
br_stp_enable_port(p);
} else {
if (p->state != BR_STATE_DISABLED)
br_stp_disable_port(p);
}
spin_unlock_bh(&br->lock);
}
static void br_port_set_promisc(struct net_bridge_port *p)
{
int err = 0;
if (br_promisc_port(p))
return;
err = dev_set_promiscuity(p->dev, 1);
if (err)
return;
br_fdb_unsync_static(p->br, p);
p->flags |= BR_PROMISC;
}
static void br_port_clear_promisc(struct net_bridge_port *p)
{
int err;
/* Check if the port is already non-promisc or if it doesn't
* support UNICAST filtering. Without unicast filtering support
* we'll end up re-enabling promisc mode anyway, so just check for
* it here.
*/
if (!br_promisc_port(p) || !(p->dev->priv_flags & IFF_UNICAST_FLT))
return;
/* Since we'll be clearing the promisc mode, program the port
* first so that we don't have interruption in traffic.
*/
err = br_fdb_sync_static(p->br, p);
if (err)
return;
dev_set_promiscuity(p->dev, -1);
p->flags &= ~BR_PROMISC;
}
/* When a port is added or removed or when certain port flags
* change, this function is called to automatically manage
* promiscuity setting of all the bridge ports. We are always called
* under RTNL so can skip using rcu primitives.
*/
void br_manage_promisc(struct net_bridge *br)
{
struct net_bridge_port *p;
bool set_all = false;
/* If vlan filtering is disabled or bridge interface is placed
* into promiscuous mode, place all ports in promiscuous mode.
*/
if ((br->dev->flags & IFF_PROMISC) || !br_vlan_enabled(br))
set_all = true;
list_for_each_entry(p, &br->port_list, list) {
if (set_all) {
br_port_set_promisc(p);
} else {
/* If the number of auto-ports is <= 1, then all other
* ports will have their output configuration
* statically specified through fdbs. Since ingress
* on the auto-port becomes forwarding/egress to other
* ports and egress configuration is statically known,
* we can say that ingress configuration of the
* auto-port is also statically known.
* This lets us disable promiscuous mode and write
* this config to hw.
*/
if (br->auto_cnt == 0 ||
(br->auto_cnt == 1 && br_auto_port(p)))
br_port_clear_promisc(p);
else
br_port_set_promisc(p);
}
}
}
static void nbp_update_port_count(struct net_bridge *br)
{
struct net_bridge_port *p;
u32 cnt = 0;
list_for_each_entry(p, &br->port_list, list) {
if (br_auto_port(p))
cnt++;
}
if (br->auto_cnt != cnt) {
br->auto_cnt = cnt;
br_manage_promisc(br);
}
}
static void nbp_delete_promisc(struct net_bridge_port *p)
{
/* If port is currently promiscuous, unset promiscuity.
* Otherwise, it is a static port so remove all addresses
* from it.
*/
dev_set_allmulti(p->dev, -1);
if (br_promisc_port(p))
dev_set_promiscuity(p->dev, -1);
else
br_fdb_unsync_static(p->br, p);
}
static void release_nbp(struct kobject *kobj)
{
struct net_bridge_port *p
= container_of(kobj, struct net_bridge_port, kobj);
kfree(p);
}
static struct kobj_type brport_ktype = {
#ifdef CONFIG_SYSFS
.sysfs_ops = &brport_sysfs_ops,
#endif
.release = release_nbp,
};
static void destroy_nbp(struct net_bridge_port *p)
{
struct net_device *dev = p->dev;
p->br = NULL;
p->dev = NULL;
dev_put(dev);
kobject_put(&p->kobj);
}
static void destroy_nbp_rcu(struct rcu_head *head)
{
struct net_bridge_port *p =
container_of(head, struct net_bridge_port, rcu);
destroy_nbp(p);
}
/* Delete port(interface) from bridge is done in two steps.
* via RCU. First step, marks device as down. That deletes
* all the timers and stops new packets from flowing through.
*
* Final cleanup doesn't occur until after all CPU's finished
* processing packets.
*
* Protected from multiple admin operations by RTNL mutex
*/
static void del_nbp(struct net_bridge_port *p)
{
struct net_bridge *br = p->br;
struct net_device *dev = p->dev;
sysfs_remove_link(br->ifobj, p->dev->name);
nbp_delete_promisc(p);
spin_lock_bh(&br->lock);
br_stp_disable_port(p);
spin_unlock_bh(&br->lock);
br_ifinfo_notify(RTM_DELLINK, p);
list_del_rcu(&p->list);
nbp_vlan_flush(p);
br_fdb_delete_by_port(br, p, 0, 1);
switchdev_deferred_process();
nbp_update_port_count(br);
netdev_upper_dev_unlink(dev, br->dev);
dev->priv_flags &= ~IFF_BRIDGE_PORT;
netdev_rx_handler_unregister(dev);
br_multicast_del_port(p);
kobject_uevent(&p->kobj, KOBJ_REMOVE);
kobject_del(&p->kobj);
br_netpoll_disable(p);
call_rcu(&p->rcu, destroy_nbp_rcu);
}
/* Delete bridge device */
void br_dev_delete(struct net_device *dev, struct list_head *head)
{
struct net_bridge *br = netdev_priv(dev);
struct net_bridge_port *p, *n;
list_for_each_entry_safe(p, n, &br->port_list, list) {
del_nbp(p);
}
br_fdb_delete_by_port(br, NULL, 0, 1);
br_vlan_flush(br);
br_multicast_dev_del(br);
del_timer_sync(&br->gc_timer);
br_sysfs_delbr(br->dev);
unregister_netdevice_queue(br->dev, head);
}
/* find an available port number */
static int find_portno(struct net_bridge *br)
{
int index;
struct net_bridge_port *p;
unsigned long *inuse;
inuse = kcalloc(BITS_TO_LONGS(BR_MAX_PORTS), sizeof(unsigned long),
GFP_KERNEL);
if (!inuse)
return -ENOMEM;
set_bit(0, inuse); /* zero is reserved */
list_for_each_entry(p, &br->port_list, list) {
set_bit(p->port_no, inuse);
}
index = find_first_zero_bit(inuse, BR_MAX_PORTS);
kfree(inuse);
return (index >= BR_MAX_PORTS) ? -EXFULL : index;
}
/* called with RTNL but without bridge lock */
static struct net_bridge_port *new_nbp(struct net_bridge *br,
struct net_device *dev)
{
int index;
struct net_bridge_port *p;
index = find_portno(br);
if (index < 0)
return ERR_PTR(index);
p = kzalloc(sizeof(*p), GFP_KERNEL);
if (p == NULL)
return ERR_PTR(-ENOMEM);
p->br = br;
dev_hold(dev);
p->dev = dev;
p->path_cost = port_cost(dev);
p->priority = 0x8000 >> BR_PORT_BITS;
p->port_no = index;
p->flags = BR_LEARNING | BR_FLOOD;
br_init_port(p);
br_set_state(p, BR_STATE_DISABLED);
br_stp_port_timer_init(p);
br_multicast_add_port(p);
return p;
}
int br_add_bridge(struct net *net, const char *name)
{
struct net_device *dev;
int res;
dev = alloc_netdev(sizeof(struct net_bridge), name, NET_NAME_UNKNOWN,
br_dev_setup);
if (!dev)
return -ENOMEM;
dev_net_set(dev, net);
dev->rtnl_link_ops = &br_link_ops;
res = register_netdev(dev);
if (res)
free_netdev(dev);
return res;
}
int br_del_bridge(struct net *net, const char *name)
{
struct net_device *dev;
int ret = 0;
rtnl_lock();
dev = __dev_get_by_name(net, name);
if (dev == NULL)
ret = -ENXIO; /* Could not find device */
else if (!(dev->priv_flags & IFF_EBRIDGE)) {
/* Attempt to delete non bridge device! */
ret = -EPERM;
}
else if (dev->flags & IFF_UP) {
/* Not shutdown yet. */
ret = -EBUSY;
}
else
br_dev_delete(dev, NULL);
rtnl_unlock();
return ret;
}
/* MTU of the bridge pseudo-device: ETH_DATA_LEN or the minimum of the ports */
int br_min_mtu(const struct net_bridge *br)
{
const struct net_bridge_port *p;
int mtu = 0;
ASSERT_RTNL();
if (list_empty(&br->port_list))
mtu = ETH_DATA_LEN;
else {
list_for_each_entry(p, &br->port_list, list) {
if (!mtu || p->dev->mtu < mtu)
mtu = p->dev->mtu;
}
}
return mtu;
}
/*
* Recomputes features using slave's features
*/
netdev_features_t br_features_recompute(struct net_bridge *br,
netdev_features_t features)
{
struct net_bridge_port *p;
netdev_features_t mask;
if (list_empty(&br->port_list))
return features;
mask = features;
features &= ~NETIF_F_ONE_FOR_ALL;
list_for_each_entry(p, &br->port_list, list) {
features = netdev_increment_features(features,
p->dev->features, mask);
}
features = netdev_add_tso_features(features, mask);
return features;
}
/* called with RTNL */
int br_add_if(struct net_bridge *br, struct net_device *dev)
{
struct net_bridge_port *p;
int err = 0;
bool changed_addr;
/* Don't allow bridging non-ethernet like devices, or DSA-enabled
* master network devices since the bridge layer rx_handler prevents
* the DSA fake ethertype handler to be invoked, so we do not strip off
* the DSA switch tag protocol header and the bridge layer just return
* RX_HANDLER_CONSUMED, stopping RX processing for these frames.
*/
if ((dev->flags & IFF_LOOPBACK) ||
dev->type != ARPHRD_ETHER || dev->addr_len != ETH_ALEN ||
!is_valid_ether_addr(dev->dev_addr) ||
netdev_uses_dsa(dev))
return -EINVAL;
/* No bridging of bridges */
if (dev->netdev_ops->ndo_start_xmit == br_dev_xmit)
return -ELOOP;
/* Device is already being bridged */
if (br_port_exists(dev))
return -EBUSY;
/* No bridging devices that dislike that (e.g. wireless) */
if (dev->priv_flags & IFF_DONT_BRIDGE)
return -EOPNOTSUPP;
p = new_nbp(br, dev);
if (IS_ERR(p))
return PTR_ERR(p);
call_netdevice_notifiers(NETDEV_JOIN, dev);
err = dev_set_allmulti(dev, 1);
if (err)
goto put_back;
err = kobject_init_and_add(&p->kobj, &brport_ktype, &(dev->dev.kobj),
SYSFS_BRIDGE_PORT_ATTR);
if (err)
goto err1;
err = br_sysfs_addif(p);
if (err)
goto err2;
err = br_netpoll_enable(p);
if (err)
goto err3;
err = netdev_rx_handler_register(dev, br_handle_frame, p);
if (err)
goto err4;
dev->priv_flags |= IFF_BRIDGE_PORT;
err = netdev_master_upper_dev_link(dev, br->dev, NULL, NULL);
if (err)
goto err5;
dev_disable_lro(dev);
list_add_rcu(&p->list, &br->port_list);
nbp_update_port_count(br);
netdev_update_features(br->dev);
if (br->dev->needed_headroom < dev->needed_headroom)
br->dev->needed_headroom = dev->needed_headroom;
if (br_fdb_insert(br, p, dev->dev_addr, 0))
netdev_err(dev, "failed insert local address bridge forwarding table\n");
if (nbp_vlan_init(p))
netdev_err(dev, "failed to initialize vlan filtering on this port\n");
spin_lock_bh(&br->lock);
changed_addr = br_stp_recalculate_bridge_id(br);
if (netif_running(dev) && netif_oper_up(dev) &&
(br->dev->flags & IFF_UP))
br_stp_enable_port(p);
spin_unlock_bh(&br->lock);
br_ifinfo_notify(RTM_NEWLINK, p);
if (changed_addr)
call_netdevice_notifiers(NETDEV_CHANGEADDR, br->dev);
dev_set_mtu(br->dev, br_min_mtu(br));
kobject_uevent(&p->kobj, KOBJ_ADD);
return 0;
err5:
dev->priv_flags &= ~IFF_BRIDGE_PORT;
netdev_rx_handler_unregister(dev);
err4:
br_netpoll_disable(p);
err3:
sysfs_remove_link(br->ifobj, p->dev->name);
err2:
kobject_put(&p->kobj);
p = NULL; /* kobject_put frees */
err1:
dev_set_allmulti(dev, -1);
put_back:
dev_put(dev);
kfree(p);
return err;
}
/* called with RTNL */
int br_del_if(struct net_bridge *br, struct net_device *dev)
{
struct net_bridge_port *p;
bool changed_addr;
p = br_port_get_rtnl(dev);
if (!p || p->br != br)
return -EINVAL;
/* Since more than one interface can be attached to a bridge,
* there still maybe an alternate path for netconsole to use;
* therefore there is no reason for a NETDEV_RELEASE event.
*/
del_nbp(p);
dev_set_mtu(br->dev, br_min_mtu(br));
spin_lock_bh(&br->lock);
changed_addr = br_stp_recalculate_bridge_id(br);
spin_unlock_bh(&br->lock);
if (changed_addr)
call_netdevice_notifiers(NETDEV_CHANGEADDR, br->dev);
netdev_update_features(br->dev);
return 0;
}
void br_port_flags_change(struct net_bridge_port *p, unsigned long mask)
{
struct net_bridge *br = p->br;
if (mask & BR_AUTO_MASK)
nbp_update_port_count(br);
}